InProcessMemoryManager used to make separate memory allocation calls for each
permission level (RW, RX, RO), which could lead to target-out-of-range errors
if data and code were placed too far apart (this was the source of failures in
the JITLink/AArch64 testcase when it was first landed).
This patch updates InProcessMemoryManager to allocate a single slab which is
subdivided between text and data. This should guarantee that accesses remain
in-range provided that individual object files do not exceed 1Mb in size.
This patch also re-enables the JITLink/AArch64 testcase.
llvm-svn: 374948
The windows bots are failing due to a memory layout error. Temporarily disabling
while I investigate whether this can be worked around, or whether the test
should be disabled on Windows.
llvm-svn: 374500
This implementation has support for all relocation types except TLV.
Compact unwind sections are not yet supported, so exceptions/unwinding will not
work.
llvm-svn: 374476
In the Atom model the symbols, content and relocations of a relocatable object
file are represented as a graph of atoms, where each Atom represents a
contiguous block of content with a single name (or no name at all if the
content is anonymous), and where edges between Atoms represent relocations.
If more than one symbol is associated with a contiguous block of content then
the content is broken into multiple atoms and layout constraints (represented by
edges) are introduced to ensure that the content remains effectively contiguous.
These layout constraints must be kept in mind when examining the content
associated with a symbol (it may be spread over multiple atoms) or when applying
certain relocation types (e.g. MachO subtractors).
This patch replaces the Atom model in JITLink with a blocks-and-symbols model.
The blocks-and-symbols model represents relocatable object files as bipartite
graphs, with one set of nodes representing contiguous content (Blocks) and
another representing named or anonymous locations (Symbols) within a Block.
Relocations are represented as edges from Blocks to Symbols. This scheme
removes layout constraints (simplifying handling of MachO alt-entry symbols,
and hopefully ELF sections at some point in the future) and simplifies some
relocation logic.
llvm-svn: 373689
If content sections have lower alignment than zero-fill sections then bump the
overall segment alignment to avoid under-aligning the zero-fill sections.
llvm-svn: 370072
MachO/x86-64 UNSIGNED relocs are almost always 64-bit (length=3), but UNSIGNED
relocs of length=2 are allowed if the target resides in the low 32-bits. This
patch adds support for such relocations in JITLink (previously they would have
triggered an unsupported relocation error).
llvm-svn: 367764
Previously we had only honored alignments on individual atoms, but
tools/runtimes may assume that the section alignment is respected too.
llvm-svn: 360555
Also updates RuntimeDyldChecker and llvm-rtdyld to support zero-fill tests by
returning a content address of zero (but no error) for zero-fill atoms, and
treating loads from zero as returning zero.
llvm-svn: 360547
If a MachO section has the no-dead-strip attribute set then its atoms should
be preserved, regardless of whether they're public or referenced elsewhere in
the object.
llvm-svn: 360477
Subtractor relocation addends are signed, so we need to read them via signed
int pointers. Accidentally treating 32-bit addends as unsigned leads to
out-of-range errors when we try to add very large (>INT32_MAX) bogus addends.
llvm-svn: 360392
This patch modifies MachOAtomGraphBuilder to use setLayoutNext rather than
addEdge, and fixes a bug in the section layout algorithm that could result in
atoms appearing more than once in the section ordering (which resulted in those
atoms being assigned invalid addresses during layout).
llvm-svn: 360205
The MachO .alt_entry directive is applied to a symbol to indicate that it is
locked (in terms of address layout and liveness) to its predecessor atom. I.e.
it is an alternate entry point, at a fixed offset, for the previous atom.
This patch updates MachOAtomGraphBuilder to check for the .alt_entry flag on
symbols and add a corresponding LayoutNext edge to the atom-graph. It also
updates MachOAtomGraphBuilder_x86_64 to generalize handling of the
X86_64_RELOC_SUBTRACTOR relocation: previously either the minuend or
subtrahend of the subtraction had to be the same as the atom being fixed up,
now it is only necessary for the minuend or subtrahend to be locked (via any
chain of alt_entry directives) to the atom being fixed up.
llvm-svn: 360194
ObjectLinkingLayer::Plugin provides event notifications when objects are loaded,
emitted, and removed. It also provides a modifyPassConfig callback that allows
plugins to modify the JITLink pass configuration.
This patch moves eh-frame registration into its own plugin, and teaches
llvm-jitlink to only add that plugin when performing execution runs on
non-Windows platforms. This should allow us to re-enable the test case that was
removed in r359198.
llvm-svn: 359357
This should fix the MachO/x86-64 eh-frame regression test by ensuring that
the symbols __ZTIi and ___gxx_personality_v0 are defined on all platforms.
llvm-svn: 359169
Frame Descriptor Entries (FDEs) have a pointer back to a Common Information
Entry (CIE) that describes how the rest FDE should be parsed. JITLink had been
assuming that FDEs always referred to the most recent CIE encountered, but the
spec allows them to point back to any previously encountered CIE. This patch
fixes JITLink to look up the correct CIE for the FDE.
The testcase is a MachO binary with an FDE that refers to a CIE that is not the
one immediately proceeding it (the layout can be viewed wit
'dwarfdump --eh-frame <testcase>'. This test case had to be a binary as llvm-mc
now sorts FDEs (as of r356216) to ensure FDEs *do* point to the most recent CIE.
llvm-svn: 359105
Summary:
JITLink is a jit-linker that performs the same high-level task as RuntimeDyld:
it parses relocatable object files and makes their contents runnable in a target
process.
JITLink aims to improve on RuntimeDyld in several ways:
(1) A clear design intended to maximize code-sharing while minimizing coupling.
RuntimeDyld has been developed in an ad-hoc fashion for a number of years and
this had led to intermingling of code for multiple architectures (e.g. in
RuntimeDyldELF::processRelocationRef) in a way that makes the code more
difficult to read, reason about, extend. JITLink is designed to isolate
format and architecture specific code, while still sharing generic code.
(2) Support for native code models.
RuntimeDyld required the use of large code models (where calls to external
functions are made indirectly via registers) for many of platforms due to its
restrictive model for stub generation (one "stub" per symbol). JITLink allows
arbitrary mutation of the atom graph, allowing both GOT and PLT atoms to be
added naturally.
(3) Native support for asynchronous linking.
JITLink uses asynchronous calls for symbol resolution and finalization: these
callbacks are passed a continuation function that they must call to complete the
linker's work. This allows for cleaner interoperation with the new concurrent
ORC JIT APIs, while still being easily implementable in synchronous style if
asynchrony is not needed.
To maximise sharing, the design has a hierarchy of common code:
(1) Generic atom-graph data structure and algorithms (e.g. dead stripping and
| memory allocation) that are intended to be shared by all architectures.
|
+ -- (2) Shared per-format code that utilizes (1), e.g. Generic MachO to
| atom-graph parsing.
|
+ -- (3) Architecture specific code that uses (1) and (2). E.g.
JITLinkerMachO_x86_64, which adds x86-64 specific relocation
support to (2) to build and patch up the atom graph.
To support asynchronous symbol resolution and finalization, the callbacks for
these operations take continuations as arguments:
using JITLinkAsyncLookupContinuation =
std::function<void(Expected<AsyncLookupResult> LR)>;
using JITLinkAsyncLookupFunction =
std::function<void(const DenseSet<StringRef> &Symbols,
JITLinkAsyncLookupContinuation LookupContinuation)>;
using FinalizeContinuation = std::function<void(Error)>;
virtual void finalizeAsync(FinalizeContinuation OnFinalize);
In addition to its headline features, JITLink also makes other improvements:
- Dead stripping support: symbols that are not used (e.g. redundant ODR
definitions) are discarded, and take up no memory in the target process
(In contrast, RuntimeDyld supported pointer equality for weak definitions,
but the redundant definitions stayed resident in memory).
- Improved exception handling support. JITLink provides a much more extensive
eh-frame parser than RuntimeDyld, and is able to correctly fix up many
eh-frame sections that RuntimeDyld currently (silently) fails on.
- More extensive validation and error handling throughout.
This initial patch supports linking MachO/x86-64 only. Work on support for
other architectures and formats will happen in-tree.
Differential Revision: https://reviews.llvm.org/D58704
llvm-svn: 358818
Lang Hames