SValBuilder tries to constant-fold symbols in the left-hand side of the symbolic
expression whenever it fails to evaluate the expression directly. However, it
only constant-folds them when they are atomic expressions, not when they are
complicated expressions themselves. This patch adds recursive constant-folding
to the left-hand side subexpression (there's a lack of symmetry because we're
trying to have symbols on the left and constants on the right). As an example,
we'd now be able to handle operations similar to "$x + 1 < $y", when $x is
constrained to a constant.
rdar://problem/31354676
Differential Revision: https://reviews.llvm.org/D31886
llvm-svn: 300178
RELRO is a feature to make segments read-only after dynamic relocations
are applied. It is different from read-only segments because RELRO is
initially writable. And of course RELRO is different from writable
segments.
RELRO is not a very well known feature. We have a series of checks to
make a decision whether a section should be in a RELRO segment or not,
but we didn't describe why. This patch adds comments to explain how
that decision is made.
llvm-svn: 300176
The bool type may be larger than the char type, so assuming we can cast from
bool to char and write a byte out to the stream is unsafe.
Hopefully this will get RPCUtilsTest.ReturnExpectedFailure passing on the bots.
llvm-svn: 300174
Summary:
APInt is currently implemented with an unsigned BitWidth field first and then a uint_64/pointer union. Due to the 64-bit size of the union there is a hole after the bitwidth.
Putting the union first allows the class to be packed. Making it 12 bytes instead of 16 bytes. An APSInt goes from 20 bytes to 16 bytes.
This shows a 4k reduction on the size of the opt binary on my local x86-64 build. So this enables some other improvement to the code as well.
Reviewers: dblaikie, RKSimon, hans, davide
Reviewed By: davide
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D32001
llvm-svn: 300171
At the very least, we have CallInst::setIsNoInline() for adding the
noinline attribute to callsites, and I'm told alwaysinline seems to
work.
Thought of adding "not all attributes are guaranteed to work here". If
someone thinks that would be better (or has a better way of phrasing
that, etc.), happy to add it.
llvm-svn: 300168
This patch allows Error and Expected types to be passed to and returned from
RPC functions.
Serializers and deserializers for custom error types (types deriving from the
ErrorInfo class template) can be registered with the SerializationTraits for
a given channel type (see registerStringError in RPCSerialization.h for an
example), allowing a given custom type to be sent/received. Unregistered types
will be serialized/deserialized as StringErrors using the custom type's log
message as the error string.
llvm-svn: 300167
path::iterator isn't a strictly conforming iterator. Specifically
it stashes the current element inside the iterator. This leads to
UB when used with reverse_iterator since it requires the element
to outlive the lifetime of the iterator.
This patch adds a static_assert inside reverse_iterator to disallow
"stashing iterator types", and it tags path::iterator as such a type.
Additionally this patch removes all uses of reverse_iterator<path::iterator>
within the tests.
llvm-svn: 300164
This is a magic header file supported by the build system that provides a
single definition, LLVM_REVISION, containing an LLVM revision identifier,
if available. This functionality previously lived in the LTO library, but
I am moving it out to lib/Support because I want to also start using it in
lib/Object to create the IR symbol table.
This change also fixes a bug where LLVM_REVISION was never actually being
used in lib/LTO because the macro HAS_LLVM_REVISION was never defined (it
was misspelled as HAVE_SVN_VERSION_INC in lib/LTO/CMakeLists.txt, and was
only being defined in a non-existent file Version.cpp).
I also changed the code to use "git rev-parse --git-dir" to locate the .git
directory, instead of looking for it in the LLVM source root directory,
which makes this compatible with monorepos as well as git worktrees.
Differential Revision: https://reviews.llvm.org/D31985
llvm-svn: 300160
std::unique_ptr's default constructor must be constexpr in order
to allow constant initialization to take place for static objects;
Even though we can never have a constexpr unique_ptr variable since
it's not a literal type.
This patch adds tests that constant initialization takes place by
using the __attribute__((require_constant_initialization)) macro.
llvm-svn: 300158
The __unordered_map_equal and __unordered_map_hash wrappers
attempt to swap const qualified predicates whenever the predicate
is empty, and is subject to the EBO.
Swapping const values seems blatently incorrect. This patch removes
the const qualifier so the values are swapped as non-const.
llvm-svn: 300154
This seems like a much more natural API, based on Derek Schuff's
comments on r300015. It further hides the implementation detail of
AttributeList that function attributes come last and appear at index
~0U, which is easy for the user to screw up. git diff says it saves code
as well: 97 insertions(+), 137 deletions(-)
This also makes it easier to change the implementation, which I want to
do next.
llvm-svn: 300153
This test has apparently been broken for years, but we never noticed before
because it's a long test and long tests approximately never get run.
llvm-svn: 300151
Bind to ANY as some machines may have IPv6 support but without IPv6 on loopback
interface.
Reviewers: eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31998
llvm-svn: 300150
r300140 introduced a bunch of failures by changing the internal
interface provided by __compressed_pair. This patch fixes all of
the failures caused by the new interface by changing the existing
code to use it.
In addition to those changes this patch also fixes two separate
issues causing test failures:
1) Fix the member swap definition for __map_value_compare. Previously
the swap was incorrectly configured to swap the comparator as const.
2) Fix an assertion failure in futures.task.members/ctor_func_alloc.pass.cpp
that incorrectly expected a move to take place when a single copy is sufficient.
There is one remaining failure regarding make_shared. I'll commit a fix for that
shortly.
llvm-svn: 300148
This typedef used to be conditional based on whether rvalue references were supported. Looks like it got left behind when we switched to always having rvalue references with c++11. I don't think it provides any value now.
llvm-svn: 300146
Summary:
__compressed_pair takes and passes it's constructor arguments by value. This causes arguments to be moved 3 times instead of once. This patch addresses that issue and fixes `constexpr` on the constructors.
I would rather have this fix than D27564, and I'm fairly confident it's not ABI breaking but I'm not 100% sure.
I prefer this solution because it removes a lot of code and makes the implementation *much* smaller.
Reviewers: mclow.lists, K-ballo
Reviewed By: K-ballo
Subscribers: K-ballo, cfe-commits
Differential Revision: https://reviews.llvm.org/D27565
llvm-svn: 300140
lldb should use when given a corefile.
This uses an LC_NOTE "main bin spec" or an LC_NOTE "kern ver str"
if they are present in a Mach-O core file.
Core files may have multiple different binaries -- different kernels,
or a mix of user process and kernel binaries -- and it can be
difficult for lldb to detect the correct one to use simply by looking
at the pages of memory. These two new LC_NOTE load commands allow
for the correct binary to be recorded unambiguously.
<rdar://problem/20878266>
llvm-svn: 300138
Remove "REQUIRES: long_tests" from test/Driver/response-file.c since it is now about 10x faster. (We can add that back if it's still too slow for some buildbot.)
llvm-svn: 300136
Improve performance of argument list parsing with large numbers of IDs and
large numbers of arguments, by tracking a conservative range of indexes within
the argument list that might contain an argument with each ID. In the worst
case (when the first and last argument with a given ID are at the opposite ends
of the argument list), this still results in a linear-time walk of the list,
but it helps substantially in the common case where each ID occurs only once,
or a few times close together in the list.
This gives a ~10x speedup to clang's `test/Driver/response-file.c`, which
constructs a very large set of command line arguments and feeds them to the
clang driver.
Differential Revision: https://reviews.llvm.org/D30130
llvm-svn: 300135
In a followup patch I intend to introduce an additional dumping
mode which dumps a graphical representation of a class's layout.
In preparation for this, the text-based layout printer needs to
be split out from the graphical layout printer, and both need
to be able to use the same code for printing the intro and outro
of a class's definition (e.g. base class list, etc).
This patch does so, and in the process introduces a skeleton
definition for the graphical printer, while currently making
the graphical printer just print nothing.
NFC
llvm-svn: 300134
Previously the dumping of class definitions was very primitive,
and it made it hard to do more than the most trivial of output
formats when dumping. As such, we would only dump one line for
each field, and then dump non-layout items like nested types
and enums.
With this patch, we do a complete analysis of the object
hierarchy including aggregate types, bases, virtual bases,
vftable analysis, etc. The only immediately visible effects
of this are that a) we can now dump a line for the vfptr where
before we would treat that as padding, and b) we now don't
treat virtual bases that come at the end of a class as padding
since we have a more detailed analysis of the class's storage
usage.
In subsequent patches, we should be able to use this analysis
to display a complete graphical view of a class's layout including
recursing arbitrarily deep into an object's base class / aggregate
member hierarchy.
llvm-svn: 300133
Previously, we allowed only integers in this context. Now you can
write expressions there. LLD is now able to handle the following
linker, for example.
MEMORY { rom (rx) : ORIGIN = (1024 * 1024) }
llvm-svn: 300131
We do not check for similarities when handling unknown tokens in
linker scripts, so "ORIGI" and "LENTH" are not good tokens as a test
for unknown tokens, as I was tempted to "fix" them.
llvm-svn: 300130
Diana Picus