One nice feature of the os_signpost API is that format string
substitutions happen in the consumer, not the logging
application. LLVM's current Signpost class doesn't take advantage of
this though and instead always uses a static "Begin/End %s" format
string.
This patch uses variadic macros to allow the API to be used as
intended. Unfortunately, the primary use-case I had in mind (the
LLDB_SCOPED_TIMER() macro) does not get much better from this, because
__PRETTY_FUNCTION__ is *not* a macro, but a static string, so
signposts created by LLDB_SCOPED_TIMER() still use a static "%s"
format string. At least LLDB_SCOPED_TIMERF() works as intended.
This reapplies the previsously reverted patch with support for
platforms where signposts are unavailable.
Differential Revision: https://reviews.llvm.org/D103575
Unfortunately the Darwin signpost header also pulls in the system
MachO header and so we need to make sure to use the LLVM versions of
those definitions.
One nice feature of the os_signpost API is that format string
substitutions happen in the consumer, not the logging
application. LLVM's current Signpost class doesn't take advantage of
this though and instead always uses a static "Begin/End %s" format
string.
This patch uses variadic macros to allow the API to be used as
intended. Unfortunately, the primary use-case I had in mind (the
LLDB_SCOPED_TIMER() macro) does not get much better from this, because
__PRETTY_FUNCTION__ is *not* a macro, but a static string, so
signposts created by LLDB_SCOPED_TIMER() still use a static "%s"
format string. At least LLDB_SCOPED_TIMERF() works as intended.
Differential Revision: https://reviews.llvm.org/D103575
Both tests are passing for GCC>8 on Linux so let's mark them as passing.
TestCPPAuto was originally disabled due to "an problem with debug info generation"
in ea35dbeff2 .
TestClassTemplateParameterPack was disabled without explanation in
0f01fb39e3 .
If an inferior exits prior to the processing of a disconnect request,
then the threads executing EventThreadFunction and request_discontinue
respectively may call SendTerminatedEvent simultaneously, in turn,
testing and/or setting g_vsc.sent_terminated_event without any
synchronization. In case the thread executing EventThreadFunction sets
it before the thread executing request_discontinue has had a chance to
test it, the latter would move ahead to issue a response to the
disconnect request. Said response may be dispatched ahead of the
terminated event compelling the client to terminate the debug session
without consuming any console output that might've been generated by
the execution of terminateCommands.
Reviewed By: clayborg, wallace
Differential Revision: https://reviews.llvm.org/D103609
This reverts commit 00764c36ed and the
follow up d2223c7a49.
The original patch broke that one could use static member variables while
inside a static member functions without having a running target. It seems that
LLDB currently requires that static variables are only found via the global
variable lookup so that they can get materialized and mapped to the argument
struct of the expression.
After 00764c36ed static variables of the current
class could be found via Clang's lookup which LLDB isn't observing. This
resulting in expressions actually containing these variables as normal
globals that can't be rewritten to a member of the argument struct.
More specifically, in the test TestCPPThis, the expression
`expr --j false -- s_a` is now only passing if we have a runnable target.
I'll revert the patch as the possible fixes aren't trivial and it degrades
the debugging experience more than the issue that the revert patch addressed.
The underlying bug can be reproduced before/after this patch by stopping
in `TestCPPThis` main function and running: `e -j false -- my_a; A<int>::s_a`.
The `my_a` will pull in the `A<int>` class and the second expression will
be resolved by Clang on its own (which causes LLDB to not materialize the
static variable).
Note: A workaround is to just do `::s_a` which will force LLDB to take the global
variable lookup.
Test leaks if we run
tools/lldb/unittests/Host/HostTests without --gtest_filter
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104091
The HostInfoLinuxFields struct is supposed to be set up/torn down on
Initialize/Terminate and should contain all the state of the plugin.
`once_flags` are part of this state and should also be reset on `Terminate` so
we can re-initialize these lazy values after the next `Initialize` call.
This itself is NFC as the HostInfoLinux was broken before this patch and is
still broken afterwards. D104091 will be the proper fix.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D104093
This workaround was necessary before the major changes of managing python versions, but it is not needed anymore.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D104047
This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
heap.py has a lot of large hand written expressions and each name in the
expression will be looked up by clang during expression parsing. For
function parameters this will be in Sema::ActOnParamDeclarator(...) in order to
catch redeclarations of parameters. The names are not needed and we have seen
some rare cases where since we don't have symbols we end up in
SymbolContext::FindBestGlobalDataSymbol(...) which may conflict with other global
symbols.
There may be a way to make this lookup smarter to avoid these cases but it is
not clear how well tested this path is and how much work it would be to fix it.
So we will go with this fix while we investigate more.
Ref: rdar://78265641
When executing a script command in HandleCommand(s) we currently print
its output twice
You can see this issue in action when adding a breakpoint command:
(lldb) b main
Breakpoint 1: where = main.out`main + 13 at main.cpp:2:3, address = 0x0000000100003fad
(lldb) break command add 1 -o "script print(\"Hey!\")"
(lldb) r
Process 76041 launched: '/tmp/main.out' (x86_64)
Hey!
(lldb) script print("Hey!")
Hey!
Process 76041 stopped
The issue is caused by HandleCommands using a temporary
CommandReturnObject and one of the commands (`script` in this case)
setting an immediate output stream. This causes the result to be printed
twice: once directly to the immediate output stream and once when
printing the result of HandleCommands.
This patch fixes the issue by introducing a new option to suppress
immediate output for temporary CommandReturnObjects.
Differential revision: https://reviews.llvm.org/D103349
The various maps in Symtab lead to some repetative code. This should
improve the situation somewhat.
Differential Revision: https://reviews.llvm.org/D103652
In the interests of disabling misc-no-recursion across LLVM (this seems
like a stylistic choice that is not consistent with LLVM's
style/development approach) this NFC preliminary change adjusts all the
.clang-tidy files to inherit from their parents as much as possible.
This change specifically preserves all the quirks of the current configs
in order to make it easier to review as NFC.
I validatad the change is NFC as follows:
for X in `cat ../files.txt`;
do
mkdir -p ../tmp/$(dirname $X)
touch $(dirname $X)/blaikie.cpp
clang-tidy -dump-config $(dirname $X)/blaikie.cpp > ../tmp/$(dirname $X)/after
rm $(dirname $X)/blaikie.cpp
done
(similarly for the "before" state, without this patch applied)
for X in `cat ../files.txt`;
do
echo $X
diff \
../tmp/$(dirname $X)/before \
<(cat ../tmp/$(dirname $X)/after \
| sed -e "s/,readability-identifier-naming\(.*\),-readability-identifier-naming/\1/" \
| sed -e "s/,-llvm-include-order\(.*\),llvm-include-order/\1/" \
| sed -e "s/,-misc-no-recursion\(.*\),misc-no-recursion/\1/" \
| sed -e "s/,-clang-diagnostic-\*\(.*\),clang-diagnostic-\*/\1/")
done
(using sed to strip some add/remove pairs to reduce the diff and make it easier to read)
The resulting report is:
.clang-tidy
clang/.clang-tidy
2c2
< Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes,-readability-identifier-naming,-misc-no-recursion'
---
> Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes,-misc-no-recursion'
compiler-rt/.clang-tidy
2c2
< Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,clang-diagnostic-*,llvm-*,-llvm-header-guard,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes'
---
> Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes,-llvm-header-guard'
flang/.clang-tidy
2c2
< Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,llvm-*,-llvm-include-order,misc-*,-misc-no-recursion,-misc-unused-parameters,-misc-non-private-member-variables-in-classes'
---
> Checks: 'clang-diagnostic-*,clang-analyzer-*,-*,llvm-*,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes,-llvm-include-order,-misc-no-recursion'
flang/include/flang/Lower/.clang-tidy
flang/include/flang/Optimizer/.clang-tidy
flang/lib/Lower/.clang-tidy
flang/lib/Optimizer/.clang-tidy
lld/.clang-tidy
lldb/.clang-tidy
llvm/tools/split-file/.clang-tidy
mlir/.clang-tidy
The `clang/.clang-tidy` change is a no-op, disabling an option that was never enabled.
The compiler-rt and flang changes are no-op reorderings of the same flags.
(side note, the .clang-tidy file in parallel-libs is broken and crashes
clang-tidy because it uses "lowerCase" as the style instead of "lower_case" -
so I'll deal with that separately)
Differential Revision: https://reviews.llvm.org/D103842
There is a common pattern:
result.AppendError(...);
result.SetStatus(eReturnStatusFailed);
I found that some commands don't actually "fail" but only
print "error: ..." because the second line got missed.
This can cause you to miss a failed command when you're
using the Python interface during testing.
(and produce some confusing script results)
I did not find any place where you would want to add
an error without setting the return status, so just
set eReturnStatusFailed whenever you add an error to
a command result.
This change does not remove any of the now redundant
SetStatus. This should allow us to see if there are any
tests that have commands unexpectedly fail with this change.
(the test suite passes for me but I don't have access to all
the systems we cover so there could be some corner cases)
Some tests that failed on x86 and AArch64 have been modified
to work with the new behaviour.
Differential Revision: https://reviews.llvm.org/D103701
This is another step towards implementing the equivalent of
`platform process list` and related functionality.
`uint32_t` is used for the argument count and index despite the
underlying value being `size_t` to be consistent with other
index-based access to arguments.
Differential Revision: https://reviews.llvm.org/D103675
The `lock` call directly will check for us if the `weak_ptr` is expired and
returns an invalid `shared_ptr` (which we correctly handle), so this check is
redundant.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D103442
Some larger projects were loading quite slowly with the current LLDB on macOS and macOS simulator builds. I did some instrument traces and found 3 main culprits:
- a LLDB timer that was put into a function that was called too often
- a std::set that was keeping track of the address of symbols that were already added
- a unnamed function generator in ObjectFile that was going slow due to allocations
In order to see this in action I ran the latest LLDB on a large application with many frameworks using the following method:
(lldb) script import time; start_time = time.perf_counter()
(lldb) file Large.app
(lldb) script print(time.perf_counter() - start_time)
I first range "sudo purge" to clear the system file caches to simulate a cold startup of the debugger, followed by two iterations with warm file caches.
Prior to this fix I was seeing the following timings:
17.68 (cold)
14.56 (warm 1)
14.52 (warm 2)
After this fix I was seeing:
11.32 (cold)
8.43 (warm 1)
8.49 (warm 2)
Differential Revision: https://reviews.llvm.org/D103504
When checking for type properties we usually want to strip all kind of type
sugar from the type. For example, sugar like Clang's ElaboratedType or typedefs
rarely influence the fundamental behaviour of a type such as its byte size.
However we always need to preserve type sugar for everything else as it does
matter for users that their variable of type `size_t` instead of `unsigned long`
for example.
This patch fixes one such bug when trying to use the SBValue API to dereference
a type.
Reviewed By: werat, shafik
Differential Revision: https://reviews.llvm.org/D103532
This is present when doing a `platform process list` and is
tracked by the underlying code. To do something like the
process list via the SB API in the future, this must be
exposed.
Differential Revision: https://reviews.llvm.org/D103375
Previously ignore counts were checked when we stopped to do the sync callback in Breakpoint::ShouldStop. That meant we would do all the ignore count work even when
there is also a condition says the breakpoint should not stop.
That's wrong, lldb treats breakpoint hits that fail the thread or condition checks as "not having hit the breakpoint". So the ignore count check should happen after
the condition and thread checks in StopInfoBreakpoint::PerformAction.
The one side-effect of doing this is that if you have a breakpoint with a synchronous callback, it will run the synchronous callback before checking the ignore count.
That is probably a good thing, since this was already true of the condition and thread checks, so this removes an odd asymmetry. And breakpoints with sync callbacks
are all internal lldb breakpoints and there's not a really good reason why you would want one of these to use an ignore count (but not a condition or thread check...)
Differential Revision https://reviews.llvm.org/D103217
This function was added in D67589 and returns an internal CommandReturnObject
which isn't allowed in the SB API. This patch just makes it private as all uses
of this function are inside SBCommandReturnObject.
Reviewed By: jankratochvil
Differential Revision: https://reviews.llvm.org/D103390
Now that LLDB proper has built-in support for intel-pt traces, we can remove the old plugin written by Intel. It has less features and it's hard to work with.
As a test, I ran "ninja lldbIntelFeatures" and it worked.
Differential Revision: https://reviews.llvm.org/D102866
The variable.rst documentation says:
```
If it returns a value, and that value is True, LLDB will be allowed to cache the children and the children count it previously obtained, and will not return to the provider class to ask. If nothing, None, or anything other than True is returned, LLDB will discard the cached information and ask. Regardless, whenever necessary LLDB will call update.
```
However, several update methods in gnu_libstdcpp.py were returning True,
which made lldb unaware of any changes in the corresponding objects.
This problem was visible by lldb-vscode in the following way:
- If a breakpoint is hit and there's a vector with the contents {1, 2},
it'll be displayed correctly.
- Then the user steps and the next stop contains the vector modified.
The program changed it to {1, 2, 3}
- frame var then displays {1, 2} incorrectly, due to the caching caused
by the update method
It's worth mentioning that none of libcxx.py'd update methods return True. Same for LibCxxVector.cpp, which returns false.
Added a very simple test that fails without this fix.
Differential Revision: https://reviews.llvm.org/D103209
Add an option to skip generating a dSYM when installing the LLDB framework on Darwin.
Reviewed By: smeenai
Differential Revision: https://reviews.llvm.org/D103124
This function has a single-value caching based on function local static variables.
This causes two problems:
* There is no synchronization, so this function randomly returns the demangled
name of other functions that are demangled at the same time.
* The 1-element cache is not very effective (the cache rate is around 0% when
running the LLDB test suite that calls this function around 30k times).
I would propose just removing it.
To prevent anyone else the git archeology: the static result variables were
originally added as this returned a ConstString reference, but that has since
been changed so that this returns by value.
Reviewed By: #lldb, JDevlieghere, shafik
Differential Revision: https://reviews.llvm.org/D103107
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
Right after pushing, I remembered that this was added to silence a GCC
warning (https://reviews.llvm.org/D99120). This reverts my patch and
adds a comment.
It seems std::ostringstream ignores NaN signs on Darwin while it prints them on
Linux. This causes that LLDB behaves differently on those platforms which is
both confusing for users and it also means we have to deal with that in our
tests.
This patch manually implements the NaN/Inf printing (which are apparently
implementation defined) to make LLDB print the same thing on all platforms. The
only output difference in practice seems to be that we now print negative NaNs
as `-nan`, but this potentially also changes the output on other systems I
haven't tested this on.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102845
IRForTarget is never used by a pass manager or any other interface that requires
this class to inherit from `Pass`.
Also IRForTarget doesn't implement the current interface correctly because it
uses the `runOnModule` return value to indicate success/failure instead of
changed/not-changed, so if this ever ends up being used as a pass it would most
likely not work as intended.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102677
This was originally failed because of llvm.org/pr21765 which describes that
LLDB can't call a debugee's functions, but I removed the (unnecessary)
function call in the rewrite. It seems that the actual bug here is that we
can't lookup static members at all, so let's X-FAIL the test for the right
reason.
Clang adds a Decl in two phases to a DeclContext. First it adds it invisible and
then it makes it visible (which will add it to the lookup data structures). It's
important that we can't do lookups into the DeclContext we are currently adding
the Decl to during this process as once the Decl has been added, any lookup will
automatically build a new lookup map and add the added Decl to it. The second
step would then add the Decl a second time to the lookup which will lead to
weird errors later one. I made adding a Decl twice to a lookup an assertion
error in D84827.
In the first step Clang also does some computations on the added Decl if it's
for example a FieldDecl that is added to a RecordDecl.
One of these computations is checking if the FieldDecl is of a record type
and the record type has a deleted constexpr destructor which will delete
the constexpr destructor of the record that got the FieldDecl.
This can lead to a bug with the way we implement MinimalImport in LLDB
and the following code:
```
struct Outer {
typedef int HookToOuter;
struct NestedClass {
HookToOuter RefToOuter;
} NestedClassMember; // We are adding this.
};
```
1. We just imported `Outer` minimally so far.
2. We are now asked to add `NestedClassMember` as a FieldDecl.
3. We import `NestedClass` minimally.
4. We add `NestedClassMember` and clang does a lookup for a constexpr dtor in
`NestedClass`. `NestedClassMember` hasn't been added to the lookup.
5. The lookup into `NestedClass` will now load the members of `NestedClass`.
6. We try to import the type of `RefToOuter` which will try to import the `HookToOuter` typedef.
7. We import the typedef and while importing we check for conflicts in `Outer` via a lookup.
8. The lookup into `Outer` will cause the invisible `NestedClassMember` to be added to the lookup.
9. We continue normally until we get back to the `addDecl` call in step 2.
10. We now add `NestedClassMember` to the lookup even though we already did that in step 8.
The fix here is disabling the minimal import for RecordTypes from FieldDecls. We
actually already did this, but so far we only force the definition of the type
to be imported *after* we imported the FieldDecl. This just moves that code
*before* we import the FieldDecl so prevent the issue above.
Reviewed By: shafik, aprantl
Differential Revision: https://reviews.llvm.org/D102993
It's not clear why the whole test got disabled, but the linked bug report
has since been fixed and the only part of it that still fails is the test
for the too permissive lookup. This re-enables the test, rewrites it to use
the modern test functions we have and splits the failing part into its
own test that we can skip without disabling the rest.
More decoupling of plugins and non-plugins. Target doesn't need to
manage ClangModulesDeclVendor and ClangPersistentVariables is always available
in situations where you need ClangModulesDeclVendor.
Differential Revision: https://reviews.llvm.org/D102811
TestMultipleTargets is randomly failing on the bots. The reason for that is that
the test is calling `SBDebugger::CreateTarget` from multiple threads.
`TargetList::CreateTarget` is curiously missing the guard that all of its other
member functions have, so all the threads in the test end up changing the
internal TargetList state at the same time and end up corrupting it.
Reviewed By: vsk, JDevlieghere
Differential Revision: https://reviews.llvm.org/D103020
In D102771 wanted to make `test_var` global to demonstrate the a no-launch test,
but the old variable is still needed for another test. This just creates the
global var with a different name to demonstrate the no-launch functionality.
At the moment nearly every test calls something similar to
`self.dbg.CreateTarget(self.getBuildArtifact("a.out"))` and them sometimes
checks if the created target is actually valid with something like
`self.assertTrue(target.IsValid(), "some useless text")`.
Beside being really verbose the error messages generated by this pattern are
always just indicating that the target failed to be created but now why.
This patch introduces a helper function `createTestTarget` to our Test class
that creates the target with the much more verbose `CreateTarget` overload that
gives us back an SBError (with a fancy error). If the target couldn't be created
the function prints out the SBError that LLDB returned and asserts for us. It
also defaults to the "a.out" build artifact path that nearly all tests are using
to avoid to hardcode "a.out" in every test.
I converted a bunch of tests to the new function but I'll do the rest of the
test suite as follow ups.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102771
This relands part of the UB fix in 4b074b49be.
The original commit also added some additional tests that uncovered some
other issues (see D102845). I landed all the passing tests in
48780527dd and this patch is now just fixing
the UB in half2float. See D102846 for a proposed rewrite of the function.
Original commit message:
The added DumpDataExtractorTest uncovered that this is lshifting a negative
integer which upsets ubsan and breaks the sanitizer bot. This patch just
changes the variable we shift to be unsigned.
This makes it possible for targets to define their own MCObjectFileInfo.
This MCObjectFileInfo is then used to determine things like section alignment.
This is a follow up to D101462 and prepares for the RISCV backend defining the
text section alignment depending on the enabled extensions.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101921
Other LLVM projects use the suffix `-depends` for the test dependencies,
however LLDB uses `-deps` and seems to be the only project under the
LLVM to do so.
In order to make the projects more homogeneous, switch all the
references to `lldb-test-deps` to `lldb-test-depends`.
Additionally, provide a compatibility target with the old name and
depending on the new name, in order to not break anyone workflow.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102889
The dyld SPI used by debugserver (_dyld_process_info_create) has become
much slower in macOS BigSur 11.3 causing a significant performance
regression when attaching. This commit mitigates that by caching the
result when calling the SPI to compute the platform.
Differential revision: https://reviews.llvm.org/D102833
In D98289#inline-939112 @dblaikie said:
Perhaps this could be more informative about what makes the range list
index of 0 invalid? "index 0 out of range of range list table (with
range list base 0xXXX) with offset entry count of XX (valid indexes
0-(XX-1))" Maybe that's too verbose/not worth worrying about since
this'll only be relevant to DWARF producers trying to debug their
DWARFv5, maybe no one will ever see this message in practice. Just
a thought.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D102851
The added DumpDataExtractorTest uncovered that this is lshifting a negative
integer which upsets ubsan and breaks the sanitizer bot. This patch just
changes the variable we shift to be unsigned and adds a bunch of tests to make
sure this function does what it promises.
DW_AT_ranges can use DW_FORM_sec_offset (instead of DW_FORM_rnglistx).
In such case DW_AT_rnglists_base does not need to be present.
DWARF-5 spec:
"If the offset_entry_count is zero, then DW_FORM_rnglistx cannot
be used to access a range list; DW_FORM_sec_offset must be used
instead. If the offset_entry_count is non-zero, then
DW_FORM_rnglistx may be used to access a range list;"
This fix is for TestTypeCompletion.py category `dwarf` using GCC with DWARF-5.
The fix just provides GetRnglist() lazy getter for `m_rnglist_table`.
The testcase is easier to review by:
diff -u lldb/test/Shell/SymbolFile/DWARF/DW_AT_low_pc-addrx.s \
lldb/test/Shell/SymbolFile/DWARF/DW_AT_range-DW_FORM_sec_offset.s
Differential Revision: https://reviews.llvm.org/D98289
`bool` is considered to be unsigned according to `std::is_unsigned<bool>::value` (and `Type::GetTypeInfo`). Encoding it as signed int works fine for normal variables and fields, but breaks when reading the values of boolean bitfields. If the field is declared as `bool b : 1` and has a value of `0b1`, the call to `SBValue::GetValueAsSigned()` will return `-1`.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D102685
This patch stops lit from looking on the PATH for clang, lld and other
users of use_llvm_tool (currently only the debuginfo-tests) unless the
call explicitly requests to opt into using the PATH. When not opting in,
tests will only look in the build directory.
See the mailing list thread starting from
https://lists.llvm.org/pipermail/llvm-dev/2021-May/150421.html.
See the review for details of why decisions were made about when still
to use the PATH.
Reviewed by: thopre
Differential Revision: https://reviews.llvm.org/D102630
A long time ago LLDB wanted to start using StringRef instead of
C-Strings/ConstString but was blocked by the fact that the StringRef constructor
that takes a C-string was asserting that the C-string isn't a nullptr. To
workaround this, D24697 introduced a special function called `withNullAsEmpty`
and that's what LLDB (and only LLDB) started to use to build StringRefs from
C-strings.
A bit later it seems that `withNullAsEmpty` was declared too awkward to use and
instead the assert in the StringRef constructor got removed (see D24904). The
rest of LLDB was then converted to StringRef by just calling the now perfectly
usable implicit constructor.
However, all the calls to `withNullAsEmpty` just remained and are now just
strange artefacts in the code base that just look out of place. It's also
curiously a LLDB-exclusive function and no other project ever called it since
it's introduction half a decade ago.
This patch removes all uses of `withNullAsEmpty`. The follow up will be to
remove the function from StringRef.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102597
This patch updates `SBCompileUnit::FindLineEntryIndex` to pass a valid
`LineEntry` pointer to `CompileUnit::FindLineEntry`.
This caused `LineTable::FindLineEntryIndexByFileIndexImpl` to return its
`best_match` initial value (UINT32_MAX).
rdar://78115426
Differential Revision: https://reviews.llvm.org/D102658
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This reverts commit bd5751f3d2.
This patch series is causing us to every so often miss switching
the state from eStateRunning to eStateStopped when we get the stop
packet from the debug server.
Reverting till I can figure out how that could be happening.
We have a bug in which using member_clang_type.GetByteSize() triggers record
layout and during this process since the record was not yet complete we ended
up reaching a record that had not been layed out yet.
Using member_type->GetByteSize() avoids this situation since it relies on size
from DWARF and will not trigger record layout.
For reference: rdar://77293040
Differential Revision: https://reviews.llvm.org/D102445
This is just a dotest check to see if we can compile a simple program that uses
libc++. Right now we are parsing the rather big `algorithm` header in the test
program, but the test really just checks whether we can find *any* libc++
headers and link against some libc++ SO. Using the much smaller `cassert` header
for checking whether we can find libc++ headers speeds up this check by a bit.
After some incredibly unscientific performance testing this saves a few seconds
when running the test suite on Linux (on macOS we hardcoded that libc++ is
always there, so this check won't be used there and we don't save any time).
Reviewed By: jankratochvil
Differential Revision: https://reviews.llvm.org/D101056
This patch specifies a few guidelines that our API tests should follow.
The motivations for this are twofold:
1. API tests have unexpected pitfalls that especially new contributors run into
when writing tests. To prevent the frustration of letting people figure those
pitfalls out by trial-and-error, let's just document them briefly in one place.
2. It prevents some arguing about what is the right way to write tests. I really
like to have fast and reliable API test suite, but I also don't want to be the
bogeyman that has to insist in every review that the test should be rewritten to
not launch a process for no good reason. It's much easier to just point to a
policy document.
I omitted some guidelines that I think could be controversial (e.g., the whole
"should assert message describe failure or success").
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D101153
A debugserver launched x86_64 cannot control an arm64/arm64e
process on an Apple Silicon system. Warn when this situation
has happened and return an error for the most common case of
attach. I think there will be refinements to this in the
future, but start out by making it easy to spot the problem
when it happens.
rdar://76630595
The Mips in DW_LANG_Mips_Assembler is a vendor name not an
architecture name and in lack of a proper generic DW_LANG_assembler,
some assemblers emit DWARF using this tag. Due to a warning I recently
introduced users will now be greeted with
This version of LLDB has no plugin for the mipsassem language. Inspection of frame variables will be limited.
By renaming this to just "Assembler" this error message will make more sense.
Differential Revision: https://reviews.llvm.org/D101406
rdar://77214764
Add a function to read NT_PRPSINFO note from FreeBSD core dumps. This
is necessary to get the process ID (NT_PRSTATUS has only thread ID).
Move the lp64 check from NT_PRSTATUS parsing to the parseFreeBSDNotes()
to avoid repeating it.
Differential Revision: https://reviews.llvm.org/D101893
The FreeBSD coredumps from i386 systems contain only FSAVE-style
NT_FPREGSET. Since we do not really support reading that kind of data
anymore, just use NT_X86_XSTATE to get FXSAVE-style data when available.
Differential Revision: https://reviews.llvm.org/D101086
I don't mean to undo others' work but it looks like the hand-rolled EditLine for LLDB on Windows isn't used. It'd be easier to make changes to bring the other platforms' Editline wrapper up to date (e.g. simplifying char vs wchar_t) without modifying/testing this one too.
Reviewed By: amccarth
Differential Revision: https://reviews.llvm.org/D102208
The gdb-remote tests are a bit artificial, depending on
Python threading, and sleeps. So I'm not 100% surprised it doesn't
work straight up on another XSsystem.
ProcessGDBRemote plugin layers.
Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.
Differential Revision: https://reviews.llvm.org/D102085
A type system is not guaranteed to have a symbol file. This patch adds null-pointer checks so we don't crash when trying to access a type system's symbol file.
Reviewed By: aprantl, teemperor
Differential Revision: https://reviews.llvm.org/D101539
This change ensures that if for whatever reason we read less bytes than expected (for example, when trying to read memory that spans multiple sections), we try reading from the live process as well.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D101390
These types also wanted to be/were copy assignable, and using the
implicit copy ctor is deprecated in the presence of an explicit copy
ctor.
Removing the explicit copy ctor provides the desired behavior - both
ctor and assignment operator are available implicitly.
Also while I was nearby there were some missing std::moves on shared
pointer parameters.
This looks like just an oversight in the AsyncThread function. It gets a result of
eStateInvalid, and then marks the process as exited, but doesn't set "done" to true,
so we go to fetch another event. That is not safe, since you don't know when that
extra packet is going to arrive. If it arrives while you are tearing down the
process, the internal-state-thread might try to handle it when the process in not
in a good state.
Rather than put more effort into checking all the shutdown paths to make sure this
extra packet doesn't cause problems, just don't fetch it. We weren't going to do
anything useful with it anyway.
The main part of the patch is setting "done = true" when we get the eStateInvalid.
I also added a check at the beginning of the while(done) loop to prevent another error
from getting us to fetch packets for an exited process.
I added a test case to ensure that if an Interrupt fails, we call the process
exited. I can't test exactly the error I'm fixing, there's no good way to know
that the stop reply for the failed interrupt wasn't fetched. But at least this
asserts that the overall behavior is correct.
Differential Revision: https://reviews.llvm.org/D101933
Fix cases that can crash `SBStructuredData::operator=`.
This happened in a case where `rhs` had a null `SBStructuredDataImpl`.
Differential Revision: https://reviews.llvm.org/D101585
This untangles the MCContext and the MCObjectFileInfo. There is a circular
dependency between MCContext and MCObjectFileInfo. Currently this dependency
also exists during construction: You can't contruct a MOFI without a MCContext
without constructing the MCContext with a dummy version of that MOFI first.
This removes this dependency during construction. In a perfect world,
MCObjectFileInfo wouldn't depend on MCContext at all, but only be stored in the
MCContext, like other MC information. This is future work.
This also shifts/adds more information to the MCContext making it more
available to the different targets. Namely:
- TargetTriple
- ObjectFileType
- SubtargetInfo
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101462
This patch fixes the column symbol resolution when creating a breakpoint
with the `move_to_nearest_code` flag set.
In order to achieve this, the patch adds column information handling in
the `LineTable`'s `LineEntry` finder. After experimenting a little, it
turns out the most natural approach in case of an inaccurate column match,
is to move backward and match the previous `LineEntry` rather than going
forward like we do with simple line breakpoints.
The patch also reflows the function to reduce code duplication.
Finally, it updates the `BreakpointResolver` heuristic to align it with
the `LineTable` method.
rdar://73218201
Differential Revision: https://reviews.llvm.org/D101221
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
When dumping the traced instructions in a for loop, like this one
4: for (int a = 0; a < n; a++)
5: do something;
there might be multiple LineEntry objects for line 4, but with different address ranges. This was causing the dump command to dump something like this:
```
a.out`main + 11 at main.cpp:4
[1] 0x0000000000400518 movl $0x0, -0x8(%rbp)
[2] 0x000000000040051f jmp 0x400529 ; <+28> at main.cpp:4
a.out`main + 28 at main.cpp:4
[3] 0x0000000000400529 cmpl $0x3, -0x8(%rbp)
[4] 0x000000000040052d jle 0x400521 ; <+20> at main.cpp:5
```
which is confusing, as main.cpp:4 appears twice consecutively.
This diff fixes that issue by making the line entry comparison strictly about the line, column and file name. Before it was also comparing the address ranges, which we don't need because our output is strictly about what the user sees in the source.
Besides, I've noticed that the logic that traverses instructions and calculates symbols and disassemblies had too much coupling, and made my changes harder to implement, so I decided to decouple it. Now there are two methods for iterating over the instruction of a trace. The existing one does it on raw load addresses, but the one provides a SymbolContext and an InstructionSP, and does the calculations efficiently (not as efficient as possible for now though), so the caller doesn't need to care about these details. I think I'll be using that iterator to reconstruct the call stacks.
I was able to fix a test with this change.
Differential Revision: https://reviews.llvm.org/D100740
This patch should fix the windows test failure following `3e2ed7440569`.
It makes use of a `SourceLocationSpec` object when resolving a symbol
context from `SymbolFilePDB` file.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch refactors a good part of the code base turning the usual
FileSpec, Line, Column, CheckInlines, ExactMatch arguments into a
SourceLocationSpec object.
This change is required for a following patch that will add handling of the
column line information when doing symbol resolution.
Differential Revision: https://reviews.llvm.org/D100965
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
A source location specifier class that holds a Declaration object containing
a FileSpec with line and column information. The column line is optional.
It also holds search flags that can be fetched by resolvers to look inlined
declarations and/or exact matches.
It describes a specific location in a source file and allows the user
to perform checks and comparaisons between multiple instances of that class.
Differential Revision: https://reviews.llvm.org/D100962
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch moves the Declaration class from the Symbol library to the
Core library. This will allow to use it in a more generic fashion and
aims to lower the dependency cycles when it comes to the linking.
The patch also does some cleaning up by making column information
permanent and removing the LLDB_ENABLE_DECLARATION_COLUMNS directives.
Differential revision: https://reviews.llvm.org/D101556
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
These two commands add a list of commands to the breakpoint/watchpoint. The current
implementation only supports replacing the current command list. I started with
that as overwrite seems to be the most common operation. But using "add" will
allow us to later offer other add-modes: "prepend", "append" and "insert".
That and "overwrite" then make up a useful set of options for this operation.
The lack of a dot before the suffix is intentional, as the suffix itself
includes a dot or dash.
Differential revision: https://reviews.llvm.org/D101655
This adds support for reading AArch64 Pointer Authentication regset
from elf-core file. Also includes a test-case for the same. Furthermore
there is also a slight refactoring of RegisterContextPOSIXCore_arm64
members and constructor. linux-aarch64-pac.core file is generated using
lldb/test/API/functionalities/postmortem/elf-core/main.c with following
clang arguments:
-march=armv8.5-a -mbranch-protection=pac-ret+leaf -nostdlib -static -g
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D99941
Commit 88a5b35d63 changed the API
of RegisterInfoPOSIX_arm64 and effectively broke the FreeBSD plugin.
Update it to work with the new API.
Differential Revision: https://reviews.llvm.org/D101521
* Using a base address or skipping it with LLDB_INVALID_ADDRESS
* Using a data offset, which does not effect the printed addresses
* Not providing an output stream
* Formatting a double sized HexFloat
* Formatting over multiple lines
Since address printing now has its own test,
I've removed the base address from all the format
type tests.
The multi line tests still use a base address to check that
it's incremented correctly for each new line.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D101627
Currently we call el_set directly to configure the editor in the libedit
wrapper. There are some cases in which this causes extra casting, but we pass
captureless lambdas as function pointers, which should work out of the box.
Since el_set takes varargs, if the cast is incorrect or if the cast is not
present, it causes a run time failure rather than compile error. This change
makes it so a few different types of configuration is done inside a helper
function to provide type safety and eliminate that casting. I didn't do all
edit line configuration because I'm not sure how important it was in other cases
and it might require something more general keep up with libedit's signature.
I'm open to suggestions, though.
Reviewed By: teemperor, JDevlieghere
Differential Revision: https://reviews.llvm.org/D101250
Covering basic cases where you have 1 item on 1 line.
Apart from eFormatCharArray, where using multiple lines
highlights the difference between it and eFormatVectorOfChar.
Reviewed By: #lldb, teemperor
Differential Revision: https://reviews.llvm.org/D101453
As a follow up of https://reviews.llvm.org/D99989#inline-953343, I'm now
storing std::string instead of char *. I know it might never break as char *,
but if it does, chasing that bug might be dauting.
Besides, I'm also checking of the strings gotten through the SB API are
null or not.
Right now to get the 'NSSet *` pointer value we first derefence it and then take
the address of the result.
Beside being inefficient this potentially can cause an infinite recursion if the
`pointer` value we get is a pointer of a type that the TypeSystem can't
derefence. If the pointer is for example some form of `void *` that the dynamic
type resolution can't resolve to an actual type, then the `Derefence` call goes
back to asking the formatters how to reference it. If the NSSet formatter then
checks if it's an NSSet variation under the hood then we just end infinitely
often recursion.
In practice this seems to happen with some form of Builtin.RawPointer we get
from a NSDictionary in Swift.
FWIW, no other formatter is doing the same deref->addressOf as here and there
doesn't seem to be any specific reason to do so in the git history (it's just
part of the initial formatter commit)
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D101537
AArch64 kernel builds default to having /smaps and
the "VmFlags" line was added in 3.8. Long before MTE
was supported.
So we can assume that if you're AArch64 with MTE,
you can run this test.
The previous method of checking had a race condition
where the process we read smaps for, could finish before
we get to read the file.
I explored some alternatives but in the end I think
it's fine to just assume we have what we need.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D100493
When the user running LLDB with default settings sees the fixit
notification it means that the auto-applied fixit didn't work. This
patch shows the underlying error message instead of just the fixit to
make it easier to understand what the error in the expression was.
Differential Revision: https://reviews.llvm.org/D101333
Remove hardcoded platform list for QPassSignals, qXfer:auxv:read
and qXfer:libraries-svr4:read and instead query the process plugin
via the GetSupportedExtensions() API.
Differential Revision: https://reviews.llvm.org/D101241
The test added in D100977 is failing to compile on these platforms. This seems
to be caused by GCC, MSVC and Clang@Windows rejecting the code because
`ToLayout` isn't complete when pointer_to_member_member is declared (even though
that seems to be valid code).
This also reverts the test changes in the lazy-loading test from D100977 as
that failed for the same reason.
Update lldb-server to not use fork or vfork on watchOS and tvOS as these
functions are explicitly marked unavailable there.
llvm-project/lldb/test/API/tools/lldb-server/main.cpp:304:11:
error: 'fork' is unavailable: not available on watchOS
if (fork() == 0)
^
WatchSimulator6.2.sdk/usr/include/unistd.h:447:8: note: 'fork' has been
explicitly marked unavailable here
pid_t fork(void) __WATCHOS_PROHIBITED __TVOS_PROHIBITED;
^
llvm-project/lldb/test/API/tools/lldb-server/main.cpp:307:11:
error: 'vfork' is unavailable: not available on watchOS
if (vfork() == 0)
^
WatchSimulator6.2.sdk/usr/include/unistd.h:602:8: note: 'vfork' has been
explicitly marked unavailable here
pid_t vfork(void) __WATCHOS_PROHIBITED __TVOS_PROHIBITED;
^
Instead of looking up a symbol and reducing it to an addr_t to set
a breakpoint, set the breakpoint on the function name directly.
The old Mac OS X dynamic loader plugin worked in terms of addresses
and I incorrectly emulated that here when I wrote this newer one.
Differential Revision: https://reviews.llvm.org/D100931
Enable reporting fork/vfork events to the server when supported.
At this moment, this is used only to test the server code, as real
client does not report fork-events and vfork-events as supported.
Differential Revision: https://reviews.llvm.org/D100208
Add a NativeDelegate API to pass new processes (forks) to LLGS,
and support detaching them via the 'D' packet. A 'D' packet without
a specific PID detaches all processes, otherwise it detaches either
the specified subprocess or the main process, depending on the passed
PID.
Differential Revision: https://reviews.llvm.org/D100191
Introduce three new stop reasons for fork, vfork and vforkdone events.
This includes server support for serializing fork/vfork events into
gdb-remote protocol. The stop infos for the two base events take a pair
of PID and TID for the newly forked process.
Differential Revision: https://reviews.llvm.org/D100196
Introduce a NativeProcessProtocol API for indicating support for
protocol extensions and enabling them. LLGS calls
GetSupportedExtensions() method on the process factory to determine
which extensions are supported by the plugin. If the future is both
supported by the plugin and reported as supported by the client, LLGS
enables it and reports to the client as supported by the server.
The extension is enabled on the process instance by calling
SetEnabledExtensions() method. This is done after qSupported exchange
(if the debugger is attached to any process), as well as after launching
or attaching to a new inferior.
The patch adds 'fork' extension corresponding to 'fork-events+'
qSupported feature and 'vfork' extension for 'vfork-events+'. Both
features rely on 'multiprocess+' being supported as well.
Differential Revision: https://reviews.llvm.org/D100153
- The register encoding state in the JSON crashlog format changes.
Update the parser accordingly.
- Print the register state when printing the symbolicated thread.
A couple of our Instrumentation runtimes were gathering backtraces,
storing it in a StructuredData array and later creating a HistoryThread
using this data. By deafult HistoryThread will consider the history PCs
as return addresses and thus will substract 1 from them to go to the
call address.
This is usually correct, but it's also wasteful as when we gather the
backtraces ourselves, we have much better information to decide how
to backtrace and symbolicate. This patch uses the new
GetFrameCodeAddressForSymbolication() to gather the PCs that should
be used for symbolication and configures the HistoryThread to just
use those PCs as-is.
(The MTC plugin was actaully applying a -1 itself and then the
HistoryThread would do it again, so this actaully fixes a bug there.)
rdar://77027680
Differential Revision: https://reviews.llvm.org/D101094
The `--allow-jit` flag allows the user to force the IR interpreter to run the
provided expression.
The `--top-level` flag parses and injects the code as if its in the top level
scope of a source file.
Both flags just change the ExecutionPolicy of the expression:
* `--allow-jit true` -> doesn't change anything (its the default)
* `--allow-jit false` -> ExecutionPolicyNever
* `--top-level` -> ExecutionPolicyTopLevel
Passing `--allow-jit false` and `--top-level` currently causes the `--top-level`
to silently overwrite the ExecutionPolicy value that was set by `--allow-jit
false`. There isn't any ExecutionPolicy value that says "top-level but only
interpret", so I would say we reject this combination of flags until someone
finds time to refactor top-level feature out of the ExecutionPolicy enum.
The SBExpressionOptions suffer from a similar symptom as `SetTopLevel` and
`SetAllowJIT` just silently disable each other. But those functions don't have
any error handling, so not a lot we can do about this in the meantime.
Reviewed By: labath, kastiglione
Differential Revision: https://reviews.llvm.org/D91780
`InsertSequence` doesn't take ownership of the pointer so releasing this pointer
is just leaking memory.
Follow up to D100806 that was fixing other leak sanitizer test failures
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D100846
Some linters get rather upset upon seeing
`std::unordered_map<const char*`, because it looks like a map of
strings but isn't. lldb uses interned strings so this is not a problem.
DenseMap is a better data structure for this anyways, so use that
instead.
At the moment the expression parser doesn't support evaluating expressions in
static member functions and just pretends the expression is evaluated within a
non-member function. This causes that all static members are inaccessible when
doing unqualified name lookup.
This patch adds support for evaluating in static member functions. It
essentially just does the same setup as what LLDB is already doing for
non-static member functions (i.e., wrapping the expression in a fake member
function) with the difference that we now mark the wrapping function as static
(to prevent access to non-static members).
Reviewed By: shafik, jarin
Differential Revision: https://reviews.llvm.org/D81550
Ever since Dave Zarzycki's patch to sort test start times based on prior
test timing data (https://reviews.llvm.org/D98179) the test suite aborts
with a SIGHUP. I don't believe his patch is to blame, but rather
uncovers an preexisting issue by making test runs more deterministic.
I was able to narrow down the issue to TestSimulatorPlatform.py. The
issue also manifests itself on the standalone bot on GreenDragon [1].
This patch disables the test until we can figure this out.
[1] http://green.lab.llvm.org/green/view/LLDB/job/lldb-cmake-standalone/
rdar://76995109
VSCode doesn't render multiple variables with the same name in the variables view. It only renders one of them. This is a situation that happens often when there are shadowed variables.
The nodejs debugger solves this by adding a number suffix to the variable, e.g. "x", "x2", "x3" are the different x variables in nested blocks.
In this patch I'm doing something similar, but the suffix is " @ <file_name:line>), e.g. "x @ main.cpp:17", "x @ main.cpp:21". The fallback would be an address if the source and line information is not present, which should be rare.
This fix is only needed for globals and locals. Children of variables don't suffer of this problem.
When there are shadowed variables
{F16182150}
Without shadowed variables
{F16182152}
Modifying these variables through the UI works
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D99989
In certain occasions times, like when LLDB is initializing and
evaluating the .lldbinit files, it tries to print to stderr and stdout
directly. This confuses the IDE with malformed data, as it talks to
lldb-vscode using stdin and stdout following the JSON RPC protocol. This
ends up terminating the debug session with the user unaware of what's
going on. There might be other situations in which this can happen, and
they will be harder to debug than the .lldbinit case.
After several discussions with @clayborg, @yinghuitan and @aadsm, we
realized that the best course of action is to simply redirect stdout and
stderr to the console, without modifying LLDB itself. This will prove to
be resilient to future bugs or features.
I made the simplest possible redirection logic I could come up with. It
only works for POSIX, and to make it work with Windows should be merely
changing pipe and dup2 for the windows equivalents like _pipe and _dup2.
Sadly I don't have a Windows machine, so I'll do it later once my office
reopens, or maybe someone else can do it.
I'm intentionally not adding a stop-redirecting logic, as I don't see it
useful for the lldb-vscode case (why would we want to do that, really?).
I added a test.
Note: this is a simpler version of D80659. I first tried to implement a
RIIA version of it, but it was problematic to manage the state of the
thread and reverting the redirection came with some non trivial
complexities, like what to do with unflushed data after the debug
session has finished on the IDE's side.
This diff ass postRunCommands, which are the counterpart of the preRunCommands. TThey will be executed right after the target is launched or attached correctly, which means that the targets can assume that the target is running.
Differential Revision: https://reviews.llvm.org/D100340
`RichManglingContext::FromCxxMethodName` allocates a m_cxx_method_parser, but never deletes it.
This fixes a `-DLLVM_USE_SANITIZER=Leaks` failure.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D100795
Add initial tests for reading register sets from core dumps. This
includes a C++ program to write registers and dump core, resulting core
dumps for Linux, FreeBSD and NetBSD, and the tests to verify them.
The tests are split into generic part, verifying user-specified register
values, and coredump-specific tests that verify memory addresses that
differ for every dump.
At this moment, all platforms support GPRs and FPRs up to XMM for amd64
target. The i386 target does not work on NetBSD at all, and is missing
FPRs entirely on FreeBSD.
Differential Revision: https://reviews.llvm.org/D91963
The test had a race that could cause two threads to end up with the same
"thread local" value. I believe this would not cause the test to fail,
but it could cause it to succeed even when the functionality is broken.
The new implementation removes this uncertainty, and removes a lot of
cruft left over from the time this test was written using pthreads.
Just fixing a few things I noticed as I am working on another feature for format
strings in the prompt: forward decls, adding constexpr constructors, various
checks, and unit tests for FormatEntity::Parse and new Definition constructors,
etc.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D98153
Support registering multiple callbacks for a single signal. This is
necessary to support multiple co-existing native process instances, with
separate SIGCHLD handlers.
The system signal handler is registered on first request, additional
callback are added on subsequent requests. The system signal handler
is removed when last callback is unregistered.
Differential Revision: https://reviews.llvm.org/D100418
The code used the total number of symbols to create a symbol ID for the
synthetic symbols. This is not correct because the IDs of real symbols
can be higher than their total number, as we do not add all symbols (and
in particular, we never add symbol zero, which is not a real symbol).
This meant we could have symbols with duplicate IDs, which caused
problems if some relocations were referring to the duplicated IDs. This
was the cause of the failure of the test D97786.
This patch fixes the code to use the ID of the highest (last) symbol
instead.
Landing this fix for Augusto Noronha. The code is getting the
Section from 'addr' passed in, but it may have been expressed as
a load address when it was created and Target::ReadMemory tries to
convert it to a Section+offset if that's now possible; use the
Section found from that cleanup if it exists.
Differential Revision: https://reviews.llvm.org/D100850
Use a variable of static storage duration to reference an intentionally
leaked variable. A static data area is in the GC-set of various leak
checkers.
This fixes 3 `check-lldb-shell` tests in a `-DLLVM_USE_SANITIZER={Leaks,Address}` build,
e.g. `test/Shell/Reproducer/TestHomeDir.test`
Differential Revision: https://reviews.llvm.org/D100806
The binary image list contains the following entry when a frame is not
found in any know binary image:
{
"size" : 0,
"source" : "A",
"base" : 0,
"uuid" : "00000000-0000-0000-0000-000000000000"
}
Note that this object is missing the name and path keys. This patch
makes the JSON parser resilient against their absence.
Commiting this patch for Augusto Noronha who is getting set
up still.
This patch changes Target::ReadMemory so the default behavior
when a read is in a Section that is read-only is to fetch the
data from the local binary image, instead of reading it from
memory. Update all callers to use their old preferences
(the old prefer_file_cache bool) using the new API; we should
revisit these calls and see if they really intend to read
live memory, or if reading from a read-only Section would be
equivalent and important for performance-sensitive cases.
rdar://30634422
Differential revision: https://reviews.llvm.org/D100338
Read the number of addressable bits from the qHostInfo packet and use it
to set the code and data address mask in the process. The data
(addressing_bits) is already present in the packet.
Differential revision: https://reviews.llvm.org/D100520
Implement FixCodeAddress and FixDataAddress for ABIMacOSX_arm64 and
ABISysV_arm64 and add missing calls to RegisterContextUnwind. We need
this to unwind on Apple Silicon where libraries like libSystem are
arm64e even when the program being debugged is arm64.
Differential revision: https://reviews.llvm.org/D100521
Add a code and data address mask to Process with respective getters and
setters and a setting that allows the user to specify the mast as a
number of addressable bits. The masks will be used by FixCodeAddress and
FixDataAddress respectively in the ABI classes.
Differential revision: https://reviews.llvm.org/D100515
DWARF allows .dwo file paths to be relative rather than absolute. When
they are relative, DWARF uses DW_AT_comp_dir to find the .dwo
file. DW_AT_comp_dir can also be relative, making the entire search
patch for the .dwo file relative. In this case, LLDB currently
searches relative to its current working directory, i.e. the directory
from which the debugger was launched. This is not right, as the
compiler, which generated the relative paths, can have no idea where
the debugger will be launched. The correct thing is to search relative
to the location of the executable binary. That is what this patch
does.
Differential Revision: https://reviews.llvm.org/D97786
debugserver's MachTask::DeallocateMemory when removing an
allocate entry from our map (in resposne to an '_m' packet),
copy the size from the entry before removing it from the
map and then using the iterator to fix an ASAN error on
the bots when running TestGdbRemoteMemoryAllocation.py
rdar://76595998
DWARF allows .dwo file paths to be relative rather than absolute. When
they are relative, DWARF uses DW_AT_comp_dir to find the .dwo
file. DW_AT_comp_dir can also be relative, making the entire search
patch for the .dwo file relative. In this case, LLDB currently
searches relative to its current working directory, i.e. the directory
from which the debugger was launched. This is not right, as the
compiler, which generated the relative paths, can have no idea where
the debugger will be launched. The correct thing is to search relative
to the location of the executable binary. That is what this patch
does.
Differential Revision: https://reviews.llvm.org/D97786
The armv6m entry in cores_match() got separated from its
friends armv7m and armv7em. Reuniting them to make it
easier to keep them updated in all at the same time.
Print a single line listing all the categories that are being skipped,
rather than relying on the check.*Support() functions specifying why a
particular category will be skipped. If we know why a category got
skipped, still print that in verbose mode.
The motivation for this change is that sometimes engineers misidentify
the output of these messages as the cause for a test failure (e.g. not
being able to build libc++ or libstdc++).
Differential revision: https://reviews.llvm.org/D100508
We have seen several crashes in LibCppStdFunctionCallableInfo(...) but we don't have a
reproducer. The last crash pointed to last call to line_entry_helper(...) and symbol
was a nullptr. So adding a check for this case.
Progress events internally have a completed count and a total count, which can mean that for a job with 20000 total counts, then there will be 20000 events fired. Sending all these events to the IDE can break it. For example, debugging a huge binary resulted in around 50 million messages, which rendered the IDE useless, as it was spending all of its resources simply parsing messages and updating the UI.
A way to fix this is to send unique percentage updates, which are at most 100 per job, which is not much. I was able to debug that big target and confirm that only unique percentage notifications are sent. I can't write a test for this because the current test is flaky. I'll figure out later how to make the test reliable, but fixing this will unblock us from deploy a new version of lldb-vscode.
Differential Revision: https://reviews.llvm.org/D100443
It looks like the goal of this code is to provide a more precise
architecture definition for the target when attaching to a process. When
attaching to a foreign debugserver, you might get into a situation where
the active (host) platform will give you bogus information on the target
process.
This change allows the platform to override the target arch only with a
compatible architecture. This fixes TestTargetXMLArch.py on Apple
Silicon. Another alternative would be to just fail in this scenario and
update the test(s).
This functionality is used exactly once, and it is trivial to implement
it differently (capture into two distinct variables, and compare for
equality afterwards).
These were in the shared llgs+platform code, but they only make sense
for llgs (as they deal with how the server reports information about
debugged processes).
By checking for cpu and toolchain features ahead
of time we don't need the custom return codes.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97684
Also remove a superfluous semicolon after the braces for a switch
statement (that wasn't warned about).
Differential Revision: https://reviews.llvm.org/D100447
Introduce new m_current_process and m_continue_process variables that
keep the pointers to currently selected process. At this moment, this
is equivalent to m_debugged_process_up but it lays foundations for
the future multiprocess support.
Differential Revision: https://reviews.llvm.org/D100256
These two functions are doing the same thing, only one of them is
sending the packets immediately and the other "queues" them to be sent
later. The first one is better as in case of errors, the backtrace will
point straight to the place that caused them.
Modify the first method to avoid duplication, and ten standardize on it.
This test is flakey because it tries to read the proc/smaps
file of the first lldb-server process it finds. This process
can finish before we finish doing that.
http://lab.llvm.org:8011/#/builders/96/builds/6634/steps/6/logs/stdio
For now limit this to MTE targets which basically means
QEMU via lldb-dotest, which doesn't have this issue.
I'll fix the race condition shortly.
The annotation is now (since the introduction of @apple_simulator_test)
redundant, and the test could theoretically run on lldb-server too (if
it supported darwin hosts).
These tests fail if you build without the x86 llvm backend.
Either because they use an x86 triple or try to backtrace which
requires some x86 knowledge to see all frames.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D100194
The original commit was reverted because of the problems it introduced
on Linux. However, FreeBSD should not be affected, so restore that part
and we will address Linux separately.
While at it, remove the dbreg hack as the underlying issue has been
fixed in the FreeBSD kernel and the problem is unlikely to happen
in real life use anyway.
Differential Revision: https://reviews.llvm.org/D98822
Refactor handling qSupported to use a virtual HandleFeatures() method.
The client-provided features are split into an array and passed
to the method. The method returns an array of server features that are
concatenated into the qSupported response to the server.
The base implementation of HandleFeatures()
in GDBRemoteCommunicationServerCommon now includes only flags common
to both platform server and llgs, while llgs-specific flags are inserted
in GDBRemoteCommunicationServerLLGS.
Differential Revision: https://reviews.llvm.org/D100140
Refactor the qSupported handler to split the reply into an array,
and identify features within the array rather than searching the string
for partial matches. While at it, use StringRef.split() to process
the compression list instead of reinventing the wheel.
Switch the arguments to MaybeEnableCompression() to use an ArrayRef
of StringRefs to simplify parameter passing from GetRemoteQSupported().
Differential Revision: https://reviews.llvm.org/D100146
This commit has caused the following tests to be flaky:
TestThreadSpecificBpPlusCondition.py
TestExitDuringExpression.py
The exact cause is not known yet, but since both tests deal with
threads, my guess is it has something to do with the tracking of
creation of new threads (which the commit touches upon).
This reverts the following commits:
d01bff8cbd,
ba62ebc48e,
e761b6b4c5,
a345419ee0.
The core file used is built for i386 so we
need the x86 backend to be able to load it.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D100195
Previously the test would fail if you built on Arm/AArch64
but did not have the x86 llvm backend enabled.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D100192
By moving them into a folder with a local lit config
requiring x86. All these tests use x86 target triples.
There are two tests that require target-x86_64 because
they run program files (instead of just needing the backend).
Those are moved to the x86 folder also but their REQUIRES are
unchanged.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D100193
In all this time, we've never used more than one delegate. The logic to
support multiple delegates is therefore untested, and becomes
particularly unwieldy once we need to support multiple processes.
Just remove it.
This reverts commit 3842de49f6.
It fails to build, with errors such as:
GDBRemoteCommunicationClient.cpp:1005:20:
error: no viable overloaded '='
avail_name = compression;
Refactor the qSupported handler to split the reply into an array,
and identify features within the array rather than searching the string
for partial matches. While at it, use StringRef.split() to process
the compression list instead of reinventing the wheel.
Switch the arguments to MaybeEnableCompression() to use an ArrayRef
of StringRefs to simplify parameter passing from GetRemoteQSupported().
Differential Revision: https://reviews.llvm.org/D100146
That code is unused since it's check-in in 2010 (and I believe it would leak
memory when called as it releases the passed unique_ptr), so let's delete it.
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D100212
When LLDB's DWARF parser is parsing the member DIEs of a struct/class it
currently fully resolves the types of static member variables in a class before
adding the respective `VarDecl` to the record.
For record types fully resolving the type will also parse the member DIEs of the
respective class. The other way of resolving is just 'forward' resolving the type
which will try to load only the minimum amount of information about the type
(for records that would only be the name/kind of the type). Usually we always
resolve types on-demand so it's rarely useful to speculatively fully resolve
them on the first use.
This patch changes makes that we only 'forward' resolve the types of static
members. This solves the fact that LLDB unnecessarily loads debug information
to parse the type if it's maybe not needed later and it also avoids a crash where
the parsed type might in turn reference the surrounding class that is currently
being parsed.
The new test case demonstrates the crash that might happen. The crash happens
with the following steps:
1. We parse class `ToLayout` and it's members.
2. We parse the static class member and fully resolve its type
(`DependsOnParam2<ToLayout>`).
3. That type has a non-static class member `DependsOnParam1<ToLayout>` for which
LLDB will try to calculate the size.
4. The layout (and size)`DependsOnParam1<ToLayout>` turns depends on the
`ToLayout` size/layout.
5. Clang will calculate the record layout/size for `ToLayout` even though we are
currently parsing it and it's missing it's non-static member.
The created is missing the offset for the yet unparsed non-static member. If we
later try to get the offset we end up hitting different asserts. Most common is
the one in `TypeSystemClang::DumpValue` where it checks that the record layout
has offsets for the current FieldDecl.
```
assert(field_idx < record_layout.getFieldCount());
```
Fixed rdar://67910011
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D100180
When debugging LanguageRuntime unwindplans, it can be
helpful to disable their use and see the normal
stack walk. Add a setting for this.
Differential Revision: https://reviews.llvm.org/D99828
Watch for fork(2)/vfork(2) (also fork/vfork-style clone(2) on Linux)
notifications and explicitly detach the forked child process, and add
initial tests for these cases. The code covers FreeBSD, Linux
and NetBSD process plugins. There is no new user-visible functionality
provided -- this change lays foundations over subsequent work on fork
support.
Differential Revision: https://reviews.llvm.org/D98822
If the debug info is missing the terminating null die, we would crash
when trying to access the nonexisting children/siblings. This was
discovered because the test case for D98619 accidentaly produced such
input.
Add a minimal support for the multiprocess extension in gdb-remote
client. It accepts PIDs as part of thread-ids, and rejects PIDs that
do not match the current inferior.
Differential Revision: https://reviews.llvm.org/D99603
A little cleanup to how these firmware corefile tests are done; add
a test that loads a dSYM that loads an OS plugin, and confirm that
the OS plugin's threads are created.
When looking up user specified formatters qualifiers are removed from types before matching,
I have added a clarifying example to the document and added an example to a relevant test to demonstrate this behavior.
Differential Revision: https://reviews.llvm.org/D99827
An empty history entry can happen by entering the expression evaluator an immediately hitting enter:
```
$ lldb
(lldb) e
Enter expressions, then terminate with an empty line to evaluate:
1: <hit enter>
```
The next time the user enters the expression evaluator, if they hit the up arrow to load the previous expression, lldb crashes. This patch treats empty history sessions as a single expression of zero length, instead of an empty list of expressions.
Fixes http://llvm.org/PR49845.
Differential Revision: https://reviews.llvm.org/D100048
The memory read --outfile command should truncate the output when unless
--append-outfile. Fix the bug and add a test.
rdar://76062318
Differential revision: https://reviews.llvm.org/D99890
Problem:
On SystemZ we need to open text files in text mode. On Windows, files opened in text mode adds a CRLF '\r\n' which may not be desirable.
Solution:
This patch adds two new flags
- OF_CRLF which indicates that CRLF translation is used.
- OF_TextWithCRLF = OF_Text | OF_CRLF indicates that the file is text and uses CRLF translation.
Developers should now use either the OF_Text or OF_TextWithCRLF for text files and OF_None for binary files. If the developer doesn't want carriage returns on Windows, they should use OF_Text, if they do want carriage returns on Windows, they should use OF_TextWithCRLF.
So this is the behaviour per platform with my patch:
z/OS:
OF_None: open in binary mode
OF_Text : open in text mode
OF_TextWithCRLF: open in text mode
Windows:
OF_None: open file with no carriage return
OF_Text: open file with no carriage return
OF_TextWithCRLF: open file with carriage return
The Major change is in llvm/lib/Support/Windows/Path.inc to only set text mode if the OF_CRLF is set.
```
if (Flags & OF_CRLF)
CrtOpenFlags |= _O_TEXT;
```
These following files are the ones that still use OF_Text which I left unchanged. I modified all these except raw_ostream.cpp in recent patches so I know these were previously in Binary mode on Windows.
./llvm/lib/Support/raw_ostream.cpp
./llvm/lib/TableGen/Main.cpp
./llvm/tools/dsymutil/DwarfLinkerForBinary.cpp
./llvm/unittests/Support/Path.cpp
./clang/lib/StaticAnalyzer/Core/HTMLDiagnostics.cpp
./clang/lib/Frontend/CompilerInstance.cpp
./clang/lib/Driver/Driver.cpp
./clang/lib/Driver/ToolChains/Clang.cpp
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99426
Use a with block for reading the cpuinfo file.
When loading the file fails (or we're not on Linux)
return an empty string. Since all the callers are
going to do "x in self.getCPUInfo()".
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D99729
Florian Hahn