Archives created with ThinLTO are bitcodes, they also need to be searched for excluded symbols.
Differential Revision: https://reviews.llvm.org/D48857
llvm-svn: 336826
Summary:
This patch adds the possibility to specify an exit code when calling quit.
We accept any int, even though it depends on the user what happens if the int is
out of the range of what the operating system supports as exit codes.
Fixes rdar://problem/38452312
Reviewers: davide, jingham, clayborg
Reviewed By: jingham
Subscribers: clayborg, jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D48659
llvm-svn: 336824
Make the DIE iterator bidirectional so we can move to the previous
sibling of a DIE.
Differential revision: https://reviews.llvm.org/D49173
llvm-svn: 336823
isKnownNegation() is currently proposed as part of D48754,
but it could be used to make InstSimplify stronger independently
of any abs() improvements.
llvm-svn: 336822
Before revision 336728, the "mayLoad" flag for instruction (V)MOVLPSrm was
inferred directly from the "default" pattern associated with the instruction
definition.
r336728 removed special node X86Movlps, and all the patterns associated to it.
Now instruction (V)MOVLPSrm doesn't have a pattern associated to it, and the
'mayLoad/hasSideEffects' flags are left unset.
When the instruction info is emitted by tablegen, method
CodeGenDAGPatterns::InferInstructionFlags() sees that (V)MOVLPSrm doesn't have a
pattern, and flags are undefined. So, it conservatively sets the
"hasSideEffects" flag for it.
As a consequence, we were losing the 'mayLoad' flag, and we were gaining a
'hasSideEffect' flag in its place.
This patch fixes the issue (originally reported by Michael Holmen).
The mca tests show the differences in the instruction info flags. Instructions
that were affected by this problem were: MOVLPSrm/VMOVLPSrm/VMOVLPSZ128rm.
Differential Revision: https://reviews.llvm.org/D49182
llvm-svn: 336818
We currently only support binary instructions in the alternate opcode shuffles.
This patch is an initial attempt at adding cast instructions as well, this raises several issues that we probably want to address as we continue to generalize the alternate mechanism:
1 - Duplication of cost determination - we should probably add scalar/vector costs helper functions and get BoUpSLP::getEntryCost to use them instead of determining costs directly.
2 - Support alternate instructions with the same opcode (e.g. casts with different src types) - alternate vectorization of calls with different IntrinsicIDs will require this.
3 - Allow alternates to be a different instruction type - mixing binary/cast/call etc.
4 - Allow passthrough of unsupported alternate instructions - related to PR30787/D28907 'copyable' elements.
Reapplied with fix to only accept 2 different casts if they come from the same source type.
Differential Revision: https://reviews.llvm.org/D49135
llvm-svn: 336812
Having `using qualified::name;` for some symbol is an important signal
for clangd code completion as the user is more likely to use such
symbol. This patch helps to uprank the relevant symbols by saving
UsingShadowDecl in the new field of CodeCompletionResult and checking
whether the corresponding UsingShadowDecl is located in the main file
later in ClangD code completion routine. While the relative importance
of such signal is a subject to change in the future, this patch simply
bumps DeclProximity score to the value of 1.0 which should be enough for
now.
The patch was tested using
`$ ninja check-clang check-clang-tools`
No unexpected failures were noticed after running the relevant testsets.
Reviewers: sammccall, ioeric
Subscribers: MaskRay, jkorous, cfe-commits
Differential Revision: https://reviews.llvm.org/D49012
llvm-svn: 336810
Summary:
InMemoryFileSystem::status behaves differently than
RealFileSystem::status. The Name contained in the Status returned by
RealFileSystem::status will be the path as requested by the caller,
whereas InMemoryFileSystem::status returns the normalized path.
For example, when requested the status for "../src/first.h",
RealFileSystem returns a Status with "../src/first.h" as the Name.
InMemoryFileSystem returns "/absolute/path/to/src/first.h".
The reason for this change is that I want to make a unit test in the
clangd testsuite (where we use an InMemoryFileSystem) to reproduce a
bug I get with the clangd program (where a RealFileSystem is used).
This difference in behavior "hides" the bug in the unit test version.
In general, I guess it's good if InMemoryFileSystem works as much as
possible like RealFileSystem.
Doing so made the FileEntry::RealPathName value (assigned in
FileManager::getFile) wrong when using the InMemoryFileSystem. That's
because it assumes that vfs::File::getName will always return the real
path. I changed to to use FileSystem::getRealPath instead.
Subscribers: ilya-biryukov, ioeric, cfe-commits
Differential Revision: https://reviews.llvm.org/D48903
llvm-svn: 336807
We currently only support binary instructions in the alternate opcode shuffles.
This patch is an initial attempt at adding cast instructions as well, this raises several issues that we probably want to address as we continue to generalize the alternate mechanism:
1 - Duplication of cost determination - we should probably add scalar/vector costs helper functions and get BoUpSLP::getEntryCost to use them instead of determining costs directly.
2 - Support alternate instructions with the same opcode (e.g. casts with different src types) - alternate vectorization of calls with different IntrinsicIDs will require this.
3 - Allow alternates to be a different instruction type - mixing binary/cast/call etc.
4 - Allow passthrough of unsupported alternate instructions - related to PR30787/D28907 'copyable' elements.
Differential Revision: https://reviews.llvm.org/D49135
llvm-svn: 336804
This mostly brings the P5600 scheduler model to a mostly complete
status. There are a number of instructions which trigger the
`error:'MipsP5600Model' lacks information for` error. These are certain
codegen only instructions relating to MIPS64 which can be addressed by
using the correct predicates for them. That will be done in a full-up
patch.
Patch by Simon Dardis.
Differential revision: https://reviews.llvm.org/D45245
llvm-svn: 336802
Summary:
Sema code complete in the recovery mode is generally useless. For many
cases, sema first completes in recovery context and then recovers to more useful
context, in which it's favorable to ignore results from recovery (as results are
often bad e.g. all builtin symbols and top-level symbols). There is also case
where only sema would fail to recover e.g. completions in excluded #if block.
Sema would try to give results, but the results are often useless (see the updated
excluded #if block test).
Reviewers: sammccall, ilya-biryukov
Subscribers: MaskRay, jkorous, cfe-commits
Differential Revision: https://reviews.llvm.org/D49175
llvm-svn: 336801
Reuse this function as to test correctness and profitability of
reducing width of either load or store operations.
Reviewsers: samparker
Differential Revision: https://reviews.llvm.org/D48624
llvm-svn: 336800
This makes easier to identify changes in the instruction info flags. It also
helps spotting potential regressions similar to the one recently introduced at
r336728.
Using the same character to mark MayLoad/MayStore/HasSideEffects is problematic
for llvm-lit. When pattern matching substrings, llvm-lit consumes tabs and
spaces. A change in position of the flag marker may not trigger a test failure.
This patch only changes the character used for flag `hasSideEffects`. The reason
why I didn't touch other flags is because I want to avoid spamming the mailing
because of the massive diff due to the numerous tests affected by this change.
In future, each instruction flag should be associated with a different character
in the Instruction Info View.
llvm-svn: 336797
This fixes an issue that we were not properly supporting multiple reduction
stmts in a loop, and not generating SMLADs for these cases. The alias analysis
checks were done too early, making it too conservative.
Differential revision: https://reviews.llvm.org/D49125
llvm-svn: 336795
If we have 2 bitcode inputs for different targets, LLD would
print "<internal>" instead of the name of one of the files.
The patch adds a test and fixes this issue.
llvm-svn: 336794
AT_NAME was being emitted before the directory paths were remapped. This
ensures that all paths are remapped before anything is emitted.
An additional test case has been added.
Note that this only works if the replacement string is an absolute path.
If not, then AT_decl_file believes the new path is a relative path, and
joins that path with the compilation directory. I do not know of a good
way to resolve this.
Patch by: Siddhartha Bagaria (starsid)
Differential revision: https://reviews.llvm.org/D49169
llvm-svn: 336793
Since .gdb_index sections contain all known symbols, they can be very large.
One of my executables has a .gdb_index section of 1350 GiB. Uniquifying
symbols by name takes 3.77 seconds on my machine. This patch parallelize it.
Time to call createSymbols() with 8.4 million unique symbols:
Without this patch: 3773 ms
Parallelism = 1: 4374 ms
Parallelism = 2: 2628 ms
Parallelism = 16: 837 ms
As you can see above, this algorithm is a bit more inefficient
than the non-parallelized version, but even with dual-core, it is
faster than that, so I think it is overall a win.
Differential Revision: https://reviews.llvm.org/D49164
llvm-svn: 336790
The compact instruction shuffles active elements of vector
into lowest numbered elements and sets remaining elements
to zero.
e.g.
compact z0.s, p0, z1.s
llvm-svn: 336789
This workaround is for GCC 5.4.1. Without this workaround, lld will
produce larger .gdb_index sections for object files compiled with the
buggy version of the compiler.
Since it is not for correctness, and it affects only debug builds (since
you are generating .gdb_index sections), perhaps the hack shouldn't have been
added in the first place. At least, I think it is time to remove this hack.
Differential Revision: https://reviews.llvm.org/D49149
llvm-svn: 336788
Summary:
log() is split into four functions:
- elog()/log()/vlog() have different severity levels, allowing filtering
- dlog() is a lazy macro which uses LLVM_DEBUG - it logs to the logger, but
conditionally based on -debug-only flag and is omitted in release builds
All logging functions use formatv-style format strings now, e.g:
log("Could not resolve URI {0}: {1}", URI, Result.takeError());
Existing log sites have been split between elog/log/vlog by best guess.
This includes a workaround for passing Error to formatv that can be
simplified when D49170 or similar lands.
Subscribers: ilya-biryukov, javed.absar, ioeric, MaskRay, jkorous, cfe-commits
Differential Revision: https://reviews.llvm.org/D49008
llvm-svn: 336785
The LASTB and LASTA instructions extract the last active element,
or element after the last active, from the source vector.
The added variants are:
Scalar:
last(a|b) w0, p0, z0.b
last(a|b) w0, p0, z0.h
last(a|b) w0, p0, z0.s
last(a|b) x0, p0, z0.d
SIMD & FP Scalar:
last(a|b) b0, p0, z0.b
last(a|b) h0, p0, z0.h
last(a|b) s0, p0, z0.s
last(a|b) d0, p0, z0.d
The CLASTB and CLASTA conditionally extract the last or element after
the last active element from the source vector.
The added variants are:
Scalar:
clast(a|b) w0, p0, w0, z0.b
clast(a|b) w0, p0, w0, z0.h
clast(a|b) w0, p0, w0, z0.s
clast(a|b) x0, p0, x0, z0.d
SIMD & FP Scalar:
clast(a|b) b0, p0, b0, z0.b
clast(a|b) h0, p0, h0, z0.h
clast(a|b) s0, p0, s0, z0.s
clast(a|b) d0, p0, d0, z0.d
Vector:
clast(a|b) z0.b, p0, z0.b, z1.b
clast(a|b) z0.h, p0, z0.h, z1.h
clast(a|b) z0.s, p0, z0.s, z1.s
clast(a|b) z0.d, p0, z0.d, z1.d
Please refer to the architecture specification for more details on
the semantics of the added instructions.
llvm-svn: 336783
This allows us to use SelectionDAG::isKnownNeverZero in DAGCombiner::visitREM (visitSDIVLike/visitUDIVLike handle the checking for constants).
llvm-svn: 336779
llvm-mca doesn't know that on modern AMD processors, portions of a general
purpose register are not treated independently. So, a partial register write has
a false dependency on the super-register.
The issue with partial register writes will be addressed by a follow-up patch.
llvm-svn: 336778
Simon Pilgrim