... so just ensure that we pass DomTreeUpdater it into it.
Fixes DomTree preservation for a large number of tests,
all of which are marked as such so that they do not regress.
... so just ensure that we pass DomTreeUpdater it into it.
Fixes DomTree preservation for a large number of tests,
all of which are marked as such so that they do not regress.
... so just ensure that we pass DomTreeUpdater it into it.
Apparently, there were no dedicated tests just for that functionality,
so i'm adding one here.
First step after e113317958,
in these tests, DomTree is valid afterwards, so mark them as such,
so that they don't regress.
In further steps, SimplifyCFG transforms shall taught to preserve DomTree,
in as small steps as possible.
Installing clang-format-11 doesn't seem to work if it's done before
we've installed LLVM. I must admit I didn't try to get to the bottom
of the issue, since installing it after seems to work.
Raw profile count values for each BB are not kept after profile
annotation. We record function entry count and branch weights
and use them to compute the count when needed. This mechanism
works well in a perfect world, but often breaks in real programs,
because of number prevision, inconsistent profile, or bugs in
BFI). This patch uses sum of profile count values to fix
function entry count to make the BFI count close to real profile
counts.
Differential Revision: https://reviews.llvm.org/D61540
Two problems fixed:
* an old version of clang-format get installed by default (6.0).
* git-clang-format is not present, only git-clang-format-<version> (e.g. git-clang-format-6.0).
Solution:
* install clang-format-11 with explicit version
* make symlink git-clang-format to the latest version of git-clang-format-<version>
Differential Revision: https://reviews.llvm.org/D93201
Similar to D52401. Normally operator delete is defined in libc++abi
(LIBCPP_DISABLE_NEW_DELETE_DEFINITIONS is off by default).
C89 4.10.3.2 The free function
C99 7.20.3.2 The free function
C11 7.22.3.3 The free function
If ptr is a null pointer, no action shall occur.
free on MSDN:
If memblock is NULL, the pointer is ignored and free immediately returns.
Reviewed By: #libc_abi, ldionne
Differential Revision: https://reviews.llvm.org/D93339
Here's another minimal step suggested by D93229 / D93397 .
(I'm trying to be extra careful in these changes because
load transforms are easy to get wrong.)
We can optimistically choose the greater alignment of a
load and its pointer operand. As the test diffs show, this
can improve what would have been unaligned vector loads
into aligned loads.
When we enhance with gep offsets, we will need to adjust
the alignment calculation to include that offset.
Differential Revision: https://reviews.llvm.org/D93406
Given the following code:
```
void Foo(int);
void Baz()
{
Bar(sizeof int);
}
```
The error message which is printed today is this:
```
error: expected parentheses around type name in sizeof expression
```
There is no source location printed whatsoever, so fixing a compile break like this becomes extremely hard in a large codebase.
My change improves the error message. But it doesn't output a FixItHint because I wasn't able to figure out how to get the locations for left and right parens. So any tips would be appreciated.
```
<source>:7:6: error: expected parentheses around type name in sizeof expression
Bar(sizeof int);
^
```
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D91129
There are out-of-tree tools using clang-offload-bundler to extract
bundles from bundled files. When a bundle is not in the bundled
file, clang-offload-bundler is expected to emit an error message
and return non-zero value. However currently clang-offload-bundler
silently generates empty file for the missing bundles.
Since OpenMP/HIP toolchains expect the current behavior, an option
-allow-missing-bundles is added to let clang-offload-bundler
create empty file when a bundle is missing when unbundling.
The unbundling job action is updated to use this option by
default.
clang-offload-bundler itself will emit error when a bundle
is missing when unbundling by default.
Changes are also made to check duplicate targets in -targets
option and emit error.
Differential Revision: https://reviews.llvm.org/D93068
Test flakiness was fixed by: 9edcedf7f2
Runs these tests to verify that all parts of the lowering work correctly.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D93384
Define Async runtime related typedefs in the `mlir::runtime` namespace.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D93391
Names in EQUIVALENCE statements are only allowed to indicate local
objects as per 19.5.1.4, paragraph 2, item (10). Thus, a name appearing
in an EQUIVALENCE statement with no corresponding declaration in the
same scope is an implicit declaration of the name. If that scope
contains an IMPLICIT NONE, it's an error.
I implemented this by adding a state variable to ScopeHandler to
indicate if we're resolving the names in an EQUIVALENCE statement and
then checked this state when resolving names. I also added a test to
the existing tests for EQUIVALENCE statements.
Differential Revision: https://reviews.llvm.org/D93345
- the !gpu.async.token is the second result of 'gpu.alloc async', not the first.
- async.execute construction takes operand types not yet wrapped in !async.value.
- fix typo
Reviewed By: herhut
Differential Revision: https://reviews.llvm.org/D93156
This is being recommitted to try and address the MSVC complaint.
This patch implements a DDG printer pass that generates a graph in
the DOT description language, providing a more visually appealing
representation of the DDG. Similar to the CFG DOT printer, this
functionality is provided under an option called -dot-ddg and can
be generated in a less verbose mode under -dot-ddg-only option.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D90159
As discussed in D93229, we only need a minimal alignment constraint
when querying whether a hypothetical vector load is safe. We still
pass/use the potentially stronger alignment attribute when checking
costs and creating the new load.
There's already a test that changes with the minimum code change,
so splitting this off as a preliminary commit independent of any
gep/offset enhancements.
Differential Revision: https://reviews.llvm.org/D93397
Similar to D77853. Change ADRP to print the target address in hex, instead of the raw immediate.
The behavior is similar to GNU objdump but we also include `0x`.
Note: GNU objdump is not consistent whether or not to emit `0x` for different architectures. We try emitting 0x consistently for all targets.
```
GNU objdump: adrp x16, 10000000
Old llvm-objdump: adrp x16, #0
New llvm-objdump: adrp x16, 0x10000000
```
`adrp Xd, 0x...` assembles to a relocation referencing `*ABS*+0x10000` which is not intended. We need to use a linker or use yaml2obj.
The main test is `test/tools/llvm-objdump/ELF/AArch64/pcrel-address.yaml`
Differential Revision: https://reviews.llvm.org/D93241
Per http://llvm.org/OpenProjects.html#llvm_loopnest, the goal of this
patch (and other following patches) is to create facilities that allow
implementing loop nest passes that run on top-level loop nests for the
New Pass Manager.
This patch extends the functionality of LoopPassManager to handle
loop-nest passes by specializing the definition of LoopPassManager that
accepts both kinds of passes in addPass.
Only loop passes are executed if L is not a top-level one, and both
kinds of passes are executed if L is top-level. Currently, loop nest
passes should have the following run method:
PreservedAnalyses run(LoopNest &, LoopAnalysisManager &,
LoopStandardAnalysisResults &, LPMUpdater &);
Reviewed By: Whitney, ychen
Differential Revision: https://reviews.llvm.org/D87045
[NFC] Use regex for code object version in hip tests
Extracted from D93258. Makes tests robust to changes in default
code object version.
Reviewed By: t-tye
Differential Revision: https://reviews.llvm.org/D93398
Fix PR48357: If .rela.dyn appears as an output section description, its type may
be SHT_RELA (due to the empty synthetic .rela.plt) while there is no input
section. The empty .rela.dyn may be retained due to a reference in a linker
script. Don't crash.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D93367
[libomptarget][nfc] Replace static const with enum
Semantically identical. Replaces 0xff... with ~0 to spare counting the f.
Has the advantage that the compiler doesn't need to prove the 4/8 byte
value dead before discarding it, and sidesteps the compilation question
associated with what static means for a single source language.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D93328
Set the return variable to "" in find_first_existing_vc_file to
say that there is a repository, but no file to depend on. This works
transparently for all other callers that handle undefinedness and
equality to an empty string the same way.
Use the knowledge to avoid depending on __FakeVCSRevision.h if there
is no git repository at all (for example when building a release) as
there is no point in regenerating an empty VCSRevision.h.
Differential Revision: https://reviews.llvm.org/D92718
Elemental intrinsic function folding was not taking the lower
bounds of constant array arguments into account; these lower bounds
can be distinct from 1 when named constants appear as arguments.
LLVM bugzilla #48437.
Differential Revision: https://reviews.llvm.org/D93321
The Linux/SystemZ platform is missing in the Getting Started guide
as platform on which LLVM is known to work.
Reviewed by: uweigand
Differential Revision: https://reviews.llvm.org/D93388
Some operators have more than one name, e.g. operator(==), operator(.eq).
That was working correctly in generic definitions but they can also
appear in other contexts: USE statements and access statements, for
example.
This changes FindInScope to always look for each of the names for
a symbol. So an operator may be use-associated under one name but
declared private under another name and it will be the same symbol.
This replaces GenericSpecInfo::FindInScope which was only usable in
some cases.
Add a version of FindInScope() that looks in the current scope to
simplify many of the calls.
Differential Revision: https://reviews.llvm.org/D93344
As noticed on D92965, we needed to simplify the prefixes to ensure all RUNs were properly covered.
We should never have a target with BMI2 without BMI1, so use that as the 'BMI level' and then check with/without TBM (all TBM targets have at least BMI1).
Since these are all working on reduction patterns, actually use that term in the function name to make them easier to search for.
At some point we're likely to start working with the ISD::VECREDUCE_* opcodes directly in the x86 backend, but that is still some way off.
It's possible currently that the sanitizer runtimes when testing grab
the path to the symbolizer through *SAN_SYMBOLIZER_PATH=...
This can be polluted by things like Android's setup script. This patch
forces external_symbolizer_path=$new_build_out_dir/llvm-symbolizer when
%env_tool_options is used.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D93352
SUMMARY:
In order for the runtime on AIX to find the compact unwind section(EHInfo table),
we would need to set the following on the traceback table:
The 6th byte's longtbtable field to true to signal there is an Extended TB Table Flag.
The Extended TB Table Flag to be 0x08 to signal there is an exception handling info presents.
Emit the offset between ehinfo TC entry and TOC base after all other optional portions of traceback table.
The patch is authored by Jason Liu.
Reviewers: David Tenty, Digger Lin
Differential Revision: https://reviews.llvm.org/D92766
Roman Lebedev