consider "super" as a candidate whenever we're parsing an expression
within an Objective-C method in an interface that has a superclass. At
some point, we'd like to give "super" a little edge over non-local
names; that will come later.
llvm-svn: 104022
ObjCObjectType, which is basically just a pair of
one of {primitive-id, primitive-Class, user-defined @class}
with
a list of protocols.
An ObjCObjectPointerType is therefore just a pointer which always points to
one of these types (possibly sugared). ObjCInterfaceType is now just a kind
of ObjCObjectType which happens to not carry any protocols.
Alter a rather large number of use sites to use ObjCObjectType instead of
ObjCInterfaceType. Store an ObjCInterfaceType as a pointer on the decl rather
than hashing them in a FoldingSet. Remove some number of methods that are no
longer used, at least after this patch.
By simplifying ObjCObjectPointerType, we are now able to easily remove and apply
pointers to Objective-C types, which is crucial for a certain kind of ObjC++
metaprogramming common in WebKit.
llvm-svn: 103870
"used" (e.g., we will refer to the vtable in the generated code) and
when they are defined (i.e., because we've seen the key function
definition). Previously, we were effectively tracking "potential
definitions" rather than uses, so we were a bit too eager about emitting
vtables for classes without key functions.
The new scheme:
- For every use of a vtable, Sema calls MarkVTableUsed() to indicate
the use. For example, this occurs when calling a virtual member
function of the class, defining a constructor of that class type,
dynamic_cast'ing from that type to a derived class, casting
to/through a virtual base class, etc.
- For every definition of a vtable, Sema calls MarkVTableUsed() to
indicate the definition. This happens at the end of the translation
unit for classes whose key function has been defined (so we can
delay computation of the key function; see PR6564), and will also
occur with explicit template instantiation definitions.
- For every vtable defined/used, we mark all of the virtual member
functions of that vtable as defined/used, unless we know that the key
function is in another translation unit. This instantiates virtual
member functions when needed.
- At the end of the translation unit, Sema tells CodeGen (via the
ASTConsumer) which vtables must be defined (CodeGen will define
them) and which may be used (for which CodeGen will define the
vtables lazily).
From a language perspective, both the old and the new schemes are
permissible: we're allowed to instantiate virtual member functions
whenever we want per the standard. However, all other C++ compilers
were more lazy than we were, and our eagerness was both a performance
issue (we instantiated too much) and a portability problem (we broke
Boost test cases, which now pass).
Notes:
(1) There's a ton of churn in the tests, because the order in which
vtables get emitted to IR has changed. I've tried to isolate some of
the larger tests from these issues.
(2) Some diagnostics related to
implicitly-instantiated/implicitly-defined virtual member functions
have moved to the point of first use/definition. It's better this
way.
(3) I could use a review of the places where we MarkVTableUsed, to
see if I missed any place where the language effectively requires a
vtable.
Fixes PR7114 and PR6564.
llvm-svn: 103718
if/switch/while/do/for statements. Previously, we would end up either:
(1) Forgetting to destroy temporaries created in the condition (!),
(2) Destroying the temporaries created in the condition *before*
converting the condition to a boolean value (or, in the case of a
switch statement, to an integral or enumeral value), or
(3) In a for statement, destroying the condition's temporaries at
the end of the increment expression (!).
We now destroy temporaries in conditions at the right times. This
required some tweaking of the Parse/Sema interaction, since the parser
was building full expressions too early in many places.
Fixes PR7067.
llvm-svn: 103187
"bottom-up" when implicit casts and comparisons are inserted, compute them
"top-down" when the full expression is finished. Makes it easier to
coordinate warnings and thus implement -Wconversion for signedness
conversions without double-warning with -Wsign-compare. Also makes it possible
to realize that a signedness conversion is okay because the context is
performing the inverse conversion. Also simplifies some logic that was
trying to calculate the ultimate comparison/result type and getting it wrong.
Also fixes a problem with the C++ explicit casts which are often "implemented"
in the AST with a series of implicit cast expressions.
llvm-svn: 103174
typedef int functype(int, int);
functype func;
also instantiate the synthesized function parameters for the resulting
function declaration.
With this change, Boost.Wave builds and passes all of its regression
tests.
llvm-svn: 103025
assignment operators.
Previously, Sema provided type-checking and template instantiation for
copy assignment operators, then CodeGen would synthesize the actual
body of the copy constructor. Unfortunately, the two were not in sync,
and CodeGen might pick a copy-assignment operator that is different
from what Sema chose, leading to strange failures, e.g., link-time
failures when CodeGen called a copy-assignment operator that was not
instantiation, run-time failures when copy-assignment operators were
overloaded for const/non-const references and the wrong one was
picked, and run-time failures when by-value copy-assignment operators
did not have their arguments properly copy-initialized.
This implementation synthesizes the implicitly-defined copy assignment
operator bodies in Sema, so that the resulting ASTs encode exactly
what CodeGen needs to do; there is no longer any special code in
CodeGen to synthesize copy-assignment operators. The synthesis of the
body is relatively simple, and we generate one of three different
kinds of copy statements for each base or member:
- For a class subobject, call the appropriate copy-assignment
operator, after overload resolution has determined what that is.
- For an array of scalar types or an array of class types that have
trivial copy assignment operators, construct a call to
__builtin_memcpy.
- For an array of class types with non-trivial copy assignment
operators, synthesize a (possibly nested!) for loop whose inner
statement calls the copy constructor.
- For a scalar type, use built-in assignment.
This patch fixes at least a few tests cases in Boost.Spirit that were
failing because CodeGen picked the wrong copy-assignment operator
(leading to link-time failures), and I suspect a number of undiagnosed
problems will also go away with this change.
Some of the diagnostics we had previously have gotten worse with this
change, since we're going through generic code for our
type-checking. I will improve this in a subsequent patch.
llvm-svn: 102853
information required to implicitly define a C++ special member
function. Use it rather than explicitly setting CurContext on entry
and exit, which is fragile.
Use this RAII object for the implicitly-defined default constructor,
copy constructor, copy assignment operator, and destructor.
llvm-svn: 102840
classes, since we only warn (not error) on offsetof() for non-POD
types. We store the base path within the OffsetOfExpr itself, then
evaluate the offsets within the constant evaluator.
llvm-svn: 102571
Amadini.
This change introduces a new expression node type, OffsetOfExpr, that
describes __builtin_offsetof. Previously, __builtin_offsetof was
implemented using a unary operator whose subexpression involved
various synthesized array-subscript and member-reference expressions,
which was ugly and made it very hard to instantiate as a
template. OffsetOfExpr represents the AST more faithfully, with proper
type source information and a more compact representation.
OffsetOfExpr also has support for dependent __builtin_offsetof
expressions; it can be value-dependent, but will never be
type-dependent (like sizeof or alignof). This commit introduces
template instantiation for __builtin_offsetof as well.
There are two major caveats to this patch:
1) CodeGen cannot handle the case where __builtin_offsetof is not a
constant expression, so it produces an error. So, to avoid
regressing in C, we retain the old UnaryOperator-based
__builtin_offsetof implementation in C while using the shiny new
OffsetOfExpr implementation in C++. The old implementation can go
away once we have proper CodeGen support for this case, which we
expect won't cause much trouble in C++.
2) __builtin_offsetof doesn't work well with non-POD class types,
particularly when the designated field is found within a base
class. I will address this in a subsequent patch.
Fixes PR5880 and a bunch of assertions when building Boost.Python
tests.
llvm-svn: 102542
complete, return an error rather than falling back to building a
dependent declaration reference, since we might not be in a dependent
context. Fixes a fiendish crash-on-invalid in Boost.FunctionTypes that
I wasn't able to reduce to anything useful.
llvm-svn: 102491
UnresolvedLookupExpr and UnresolvedMemberExpr by substituting the
naming class we computed when building the expression in the
template...
... which we didn't always do correctly. Teach
UnresolvedMemberExpr::getNamingClass() all about the new
representation of injected-class-names in templates, so that it can
return a naming class that is the current instantiation.
Also, when decomposing a template-id into its template name and its
arguments, be sure to set the naming class on the LookupResult
structure.
Fixes PR6947 the right way.
llvm-svn: 102448
using declaration, look at its underlying declaration to determine the
lookup result kind (e.g., overloaded, unresolved). Fixes at least one
issue in Boost.Bimap.
llvm-svn: 102317
support dependent receivers for class and instance messages, along
with dependent message arguments (of course), and check as much as we
can at template definition time.
This commit also deals with a subtle aspect of template instantiation
in Objective-C++, where the type 'T *' can morph from a dependent
PointerType into a non-dependent ObjCObjectPointer type.
llvm-svn: 102071
method parameter, provide a note pointing at the parameter itself so
the user does not have to manually look for the function/method being
called and match up parameters to arguments. For example, we now get:
t.c:4:5: warning: incompatible pointer types passing 'long *' to
parameter of
type 'int *' [-pedantic]
f(long_ptr);
^~~~~~~~
t.c:1:13: note: passing argument to parameter 'x' here
void f(int *x);
^
llvm-svn: 102038
expressions, to improve source-location information, clarify the
actual receiver of the message, and pave the way for proper C++
support. The ObjCMessageExpr node represents four different kinds of
message sends in a single AST node:
1) Send to a object instance described by an expression (e.g., [x method:5])
2) Send to a class described by the class name (e.g., [NSString method:5])
3) Send to a superclass class (e.g, [super method:5] in class method)
4) Send to a superclass instance (e.g., [super method:5] in instance method)
Previously these four cases where tangled together. Now, they have
more distinct representations. Specific changes:
1) Unchanged; the object instance is represented by an Expr*.
2) Previously stored the ObjCInterfaceDecl* referring to the class
receiving the message. Now stores a TypeSourceInfo* so that we know
how the class was spelled. This both maintains typedef information
and opens the door for more complicated C++ types (e.g., dependent
types). There was an alternative, unused representation of these
sends by naming the class via an IdentifierInfo *. In practice, we
either had an ObjCInterfaceDecl *, from which we would get the
IdentifierInfo *, or we fell into the case below...
3) Previously represented by a class message whose IdentifierInfo *
referred to "super". Sema and CodeGen would use isStr("super") to
determine if they had a send to super. Now represented as a
"class super" send, where we have both the location of the "super"
keyword and the ObjCInterfaceDecl* of the superclass we're
targetting (statically).
4) Previously represented by an instance message whose receiver is a
an ObjCSuperExpr, which Sema and CodeGen would check for via
isa<ObjCSuperExpr>(). Now represented as an "instance super" send,
where we have both the location of the "super" keyword and the
ObjCInterfaceDecl* of the superclass we're targetting
(statically). Note that ObjCSuperExpr only has one remaining use in
the AST, which is for "super.prop" references.
The new representation of ObjCMessageExpr is 2 pointers smaller than
the old one, since it combines more storage. It also eliminates a leak
when we loaded message-send expressions from a precompiled header. The
representation also feels much cleaner to me; comments welcome!
This patch attempts to maintain the same semantics we previously had
with Objective-C message sends. In several places, there are massive
changes that boil down to simply replacing a nested-if structure such
as:
if (message has a receiver expression) {
// instance message
if (isa<ObjCSuperExpr>(...)) {
// send to super
} else {
// send to an object
}
} else {
// class message
if (name->isStr("super")) {
// class send to super
} else {
// send to class
}
}
with a switch
switch (E->getReceiverKind()) {
case ObjCMessageExpr::SuperInstance: ...
case ObjCMessageExpr::Instance: ...
case ObjCMessageExpr::SuperClass: ...
case ObjCMessageExpr::Class:...
}
There are quite a few places (particularly in the checkers) where
send-to-super is effectively ignored. I've placed FIXMEs in most of
them, and attempted to address send-to-super in a reasonable way. This
could use some review.
llvm-svn: 101972
TryStaticImplicitCast (for references, class types, and everything
else, respectively) into a single invocation of
InitializationSequence.
One of the paths (for class types) was the only client of
Sema::TryInitializationByConstructor, which I have eliminated. This
also simplified the interface for much of the cast-checking logic,
eliminating yet more code.
I've kept the representation of C++ functional casts with <> 1
arguments the same, despite the fact that I hate it. That fix will
come soon. To satisfy my paranoia, I've bootstrapped + tested Clang
with these changes.
llvm-svn: 101549
generally recover from typos in keywords (since we would effectively
have to mangle the token stream). However, there are still benefits to
typo-correcting with keywords:
- We don't make stupid suggestions when the user typed something
that is similar to a keyword.
- We can suggest the keyword in a diagnostic (did you mean
"static_cast"?), even if we can't recover and therefore don't have
a fix-it.
llvm-svn: 101274
that adds parentheses from the main diagnostic down to a new
note. This way, when the fix-it represents a choice between two
options, each of the options is associted with a note. There is no
default option in such cases. For example:
/Users/dgregor/t.c:2:9: warning: & has lower precedence than ==; ==
will be
evaluated first [-Wparentheses]
if (x & y == 0) {
^~~~~~~~
/Users/dgregor/t.c:2:9: note: place parentheses around the &
expression to
evaluate it first
if (x & y == 0) {
^
( )
/Users/dgregor/t.c:2:9: note: place parentheses around the ==
expression to
silence this warning
if (x & y == 0) {
^
( )
llvm-svn: 101249
name-lookup ambiguities when there are multiple base classes that are
all specializations of the same class template. This is part of a
general cleanup for ambiguities in template-name lookup. Fixes
PR6717.
llvm-svn: 101065
LookupInObjCMethod. Doing so allows all sorts of invalid code
to slip through to codegen. This patch does not change the
AST representation of super, though that would now be a natural
thing to do since it can only be in the receiver position and
in the base of a ObjCPropertyRefExpr.
There are still several ugly areas handling super in the parser,
but this is definitely a step in the right direction.
llvm-svn: 100959
typo correction. However, now that the code has been factored out
of LookupMemberExpr, it can recurse to itself instead of to
LookupMemberExpr! Remove grossness.
llvm-svn: 100958
Douglas Gregor