Without AVX512DQ we don't have KMOVB so we can't really copy 8-bits of a k-register to a GPR. We have to copy 16 bits instead. We do this even if the DAG copy is from v8i1->v16i1. If we detect the (i8 (bitcast (v8i1 (extract_subvector (v16i1 X), 0)))) we should rewrite the types to match the copy we do support. By doing this, we can help known bits to propagate without losing the upper 8 bits of the input to the extract_subvector. This allows some zero extends to be removed since we have an isel pattern to use kmovw for (zero_extend (i16 (bitcast (v16i1 X))).
Differential Revision: https://reviews.llvm.org/D66489
llvm-svn: 369434
The assert that caused this to be reverted should be fixed now.
Original commit message:
This patch changes our defualt legalization behavior for 16, 32, and
64 bit vectors with i8/i16/i32/i64 scalar types from promotion to
widening. For example, v8i8 will now be widened to v16i8 instead of
promoted to v8i16. This keeps the elements widths the same and pads
with undef elements. We believe this is a better legalization strategy.
But it carries some issues due to the fragmented vector ISA. For
example, i8 shifts and multiplies get widened and then later have
to be promoted/split into vXi16 vectors.
This has the potential to cause regressions so we wanted to get
it in early in the 10.0 cycle so we have plenty of time to
address them.
Next steps will be to merge tests that explicitly test the command
line option. And then we can remove the option and its associated
code.
llvm-svn: 368183
This patch changes our defualt legalization behavior for 16, 32, and
64 bit vectors with i8/i16/i32/i64 scalar types from promotion to
widening. For example, v8i8 will now be widened to v16i8 instead of
promoted to v8i16. This keeps the elements widths the same and pads
with undef elements. We believe this is a better legalization strategy.
But it carries some issues due to the fragmented vector ISA. For
example, i8 shifts and multiplies get widened and then later have
to be promoted/split into vXi16 vectors.
This has the potential to cause regressions so we wanted to get
it in early in the 10.0 cycle so we have plenty of time to
address them.
Next steps will be to merge tests that explicitly test the command
line option. And then we can remove the option and its associated
code.
llvm-svn: 367901
I'm not convinced the code this calls is properly vetted for
vXi1 vectors. Experimental vector widening legalization testing
for D55251 is now hitting an assertion failure inside
EltsFromConsecutiveLoads. This is occurring from a v2i1 load
having a store size different than its VT size. Hopefully
this commit will keep such issues from happening.
llvm-svn: 366405
INC/DEC is really a special case of a more generic issue. We should also turn leas into add reg/reg or add reg/imm regardless of the slow lea flags.
This also supports LEA64_32 which has 64 bit input registers and 32 bit output registers. So we need to convert the 64 bit inputs to their 32 bit equivalents to check if they are equal to base reg.
One thing to note, the original code preserved the kill flags by adding operands to the new instruction instead of using addReg. But I think tied operands aren't supposed to have the kill flag set. I dropped the kill flags, but I could probably try to preserve it in the add reg/reg case if we think its important. Not sure which operand its supposed to go on for the LEA64_32r instruction due to the super reg implicit uses. Though I'm also not sure those are needed since they were probably just created by an INSERT_SUBREG from a 32-bit input.
Differential Revision: https://reviews.llvm.org/D61472
llvm-svn: 361691
We're better of emitting a single compare + kand rather than a compare for the
other use and a masked compare.
I'm looking into using custom instruction selection for VPTESTM to reduce the
ridiculous number of permutations of patterns in the isel table. Putting a one
use check on all masked compare folding makes load fold matching in the custom
code easier.
llvm-svn: 358358
Attempt to combine CONCAT_VECTORS nodes, which we only really have pre-legalization.
This encourages a lot of X86ISD::SUBV_BROADCAST generation, so I've added SimplifyDemandedVectorEltsForTargetNode handling for this at the same time.
The X86ISD::VTRUNC regression in shuffle-vs-trunc-256-widen.ll will be handled in a future commit.
llvm-svn: 356064
This patch adds scalar/subvector BROADCAST handling to EltsFromConsecutiveLoads.
It mainly shows codegen changes to 32-bit code which failed to handle i64 loads, although 64-bit code is also using this new path to more efficiently combine to a broadcast load.
Differential Revision: https://reviews.llvm.org/D58053
llvm-svn: 354340
This patch enables SimplifyDemandedBits to call SimplifyDemandedVectorElts in cases where the demanded bits mask covers entire elements of a bitcasted source vector.
There are a couple of cases here where simplification at a deeper level (such as through bitcasts) prevents further simplification - CommitTargetLoweringOpt only adds immediate uses/users back to the worklist when we might want to combine the original caller again to see what else it can simplify.
As well as that I had to disable handling of bool vector until SimplifyDemandedVectorElts better supports some of their opcodes (SETCC, shifts etc.).
Fixes PR39178
Differential Revision: https://reviews.llvm.org/D52935
llvm-svn: 343913
AVX512F only has integer domain logic instructions. AVX512DQ added FP domain logic instructions.
Execution domain fixing runs before EVEX->VEX. So if we have AVX512F and not AVX512DQ we fail to do execution domain switching of the logic operations. This leads to mismatches in execution domain and more test differences.
This patch adds custom domain fixing that switches EVEX integer logic operations to VEX fp logic operations if XMM16-31 are not used.
llvm-svn: 337137
This upgrades all of the intrinsics to use fneg instructions to convert fma into fmsub/fnmsub/fnmadd/fmsubadd. And uses a select instruction for masking.
This matches how clang uses the intrinsics these days.
llvm-svn: 336409
Ensure we test on 32-bit and 64-bit targets, and strip -mcpu usage.
Part of ongoing work to ensure we test all intrinsic style tests on 32 and 64 bit targets where possible.
llvm-svn: 333843
We have unmasked intrinsics now and wrap them with a select. This is a net reduction of 36 intrinsics from before the unmasked intrinsics were added.
llvm-svn: 333388
This removes 6 intrinsics since we no longer need separate mask and maskz intrinsics.
Differential Revision: https://reviews.llvm.org/D47124
llvm-svn: 332890
This completes the work started in r329604 and r329605 when we changed clang to no longer use the intrinsics.
We lost some InstCombine SimplifyDemandedBit optimizations through this change as we aren't able to fold 'and', bitcast, shuffle very well.
llvm-svn: 329990
We swapped the operands and used setle, but I don't see any reason to do that. I think this is a holdover from SSE where we swap and the invert to use pcmpgt. But with AVX512 we don't want an invert so we won't use pcmpgt. So there's no need to swap.
llvm-svn: 325527
Summary:
This patch changes the signature of the avx512 packed fp compare intrinsics to return a vXi1 vector and no longer take a mask as input. The casts to scalar type will now need to be explicit in the IR. The masking node will now be an explicit and in the IR.
This makes the intrinsic look much more similar to an fcmp instruction that we wish we could use for these but can't. We already use icmp instructions for integer compares.
Previously the lowering step of isel would turn the intrinsic into an X86 specific ISD node and a emit the masking nodes as well as some bitcasts. This means DAG combines can't see the vXi1 type until somewhat late, making it more difficult to combine out gpr<->mask transition sequences. By exposing the vXi1 type explicitly in the IR and initial SelectionDAG we give earlier DAG combines and even InstCombine the chance to see it and optimize it.
This should make any issues with gpr<->mask sequences the same between integer and fp. Meaning we only have to fix them once.
Reviewers: spatel, delena, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43137
llvm-svn: 324827
This reduces the number of transitions between k-registers and GPRs, reducing the number of instructions.
There's still some room for improvement to remove more transitions, but this is a good start.
llvm-svn: 324184
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
Add support for custom execution domain fixing and implement support for BLENDPD/BLENDPS/PBLENDD/PBLENDW.
Differential Revision: https://reviews.llvm.org/D42042
llvm-svn: 322524
We were previously using kunpck with zero inputs unnecessarily. And we had cases where we would insert into a zero vector and then insert into larger zero vector incurring two sets of shifts.
llvm-svn: 320244
For narrow sizes we'll widen the zero vector and widen the insert. Then do an extract_subvector to get back down to correct size.
This allows us to remove some patterns from the isel table that had to COPY_TO_REGCLASS to an oversized register, do the shift and then COPY_TO_REGCLASS back to the narrow register. Now this is represented explicitly in the DAG.
This seems to have perturbed the register allocation in one of the tests, but the number of instructions didn't change.
llvm-svn: 320190
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
Remove builtins from llvm and add AutoUpgrade support.
Also add fast-isel tests for the TEST and TESTN instructions.
Differential Revision: https://reviews.llvm.org/D38736
llvm-svn: 318036
This patch, together with a matching clang patch (https://reviews.llvm.org/D38672), implements the lowering of X86 shuffle i/f intrinsics to IR.
Differential Revision: https://reviews.llvm.org/D38671
Change-Id: I1e7d359a74743e995ec356237a85214ce55d3661
llvm-svn: 318026
This will enable us to prefer VALIGND/Q during shuffle lowering in order to get the extended register encoding space when BWI isn't available. But if we end up not using the extended registers we can switch VPALIGNR for the shorter VEX encoding.
Differential Revision: https://reviews.llvm.org/D39401
llvm-svn: 317122
Summary:
This autoupgrades most of the broadcast intrinsics. They've been unused in clang for some time.
This leaves the 32x2 intrinsics because they are still used in clang.
Reviewers: RKSimon, zvi, igorb
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36606
llvm-svn: 310725
[X86][AVX512] Improve lowering of AVX512 compare intrinsics (remove redundant shift left+right instructions).
AVX512 compare instructions return v*i1 types.
In cases where the number of elements in the returned value are less than 8, clang adds zeroes to get a mask of v8i1 type.
Later on it's replaced with CONCAT_VECTORS, which then is lowered to many DAG nodes including insert/extract element and shift right/left nodes.
The fact that AVX512 compare instructions put the result in a k register and zeroes all its upper bits allows us to remove the extra nodes simply by copying the result to the required register class.
When lowering, identify these cases and transform them into an INSERT_SUBVECTOR node (marked legal), then catch this pattern in instructions selection phase and transform it into one avx512 cmp instruction.
Differential Revision: https://reviews.llvm.org/D33188
llvm-svn: 306402
Summary:
These intrinsics aren't used by clang and haven't been for a while.
There's some really terrible codegen in the 32-bit target for avx512bw due to i64 not being legal. But as I said these intrinsics aren't used by clang even before this patch so this codegen reflects our clang behavior today.
Reviewers: spatel, RKSimon, zvi, igorb
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34389
llvm-svn: 306047
AVX512 compare instructions return v*i1 types.
In cases where the number of elements in the returned value are less than 8, clang adds zeroes to get a mask of v8i1 type.
Later on it's replaced with CONCAT_VECTORS, which then is lowered to many DAG nodes including insert/extract element and shift right/left nodes.
The fact that AVX512 compare instructions put the result in a k register and zeroes all its upper bits allows us to remove the extra nodes simply by copying the result to the required register class.
When lowering, identify these cases and transform them into an INSERT_SUBVECTOR node (marked legal), then catch this pattern in instructions selection phase and transform it into one avx512 cmp instruction.
Differential Revision: https://reviews.llvm.org/D33188
llvm-svn: 305465
Craig Topper