Summary:
This is a follow up patch to r346956 for the `SizeClassAllocator32`
allocator.
This patch makes `AddressSpaceView` a template parameter both to the
`ByteMap` implementations (but makes `LocalAddressSpaceView` the
default), some `AP32` implementations and is used in `SizeClassAllocator32`.
The actual changes to `ByteMap` implementations and
`SizeClassAllocator32` are very simple. However the patch is large
because it requires changing all the `AP32` definitions, and users of
those definitions.
For ASan and LSan we make `AP32` and `ByteMap` templateds type that take
a single `AddressSpaceView` argument. This has been done because we will
instantiate the allocator with a type that isn't `LocalAddressSpaceView`
in the future patches. For the allocators used in the other sanitizers
(i.e. HWAsan, MSan, Scudo, and TSan) use of `LocalAddressSpaceView` is
hard coded because we do not intend to instantiate the allocators with
any other type.
In the cases where untemplated types have become templated on a single
`AddressSpaceView` parameter (e.g. `PrimaryAllocator`) their name has
been changed to have a `ASVT` suffix (Address Space View Type) to
indicate they are templated. The only exception to this are the `AP32`
types due to the desire to keep the type name as short as possible.
In order to check that template is instantiated in the correct a way a
`static_assert(...)` has been added that checks that the
`AddressSpaceView` type used by `Params::ByteMap::AddressSpaceView` matches
the `Params::AddressSpaceView`. This uses the new `sanitizer_type_traits.h`
header.
rdar://problem/45284065
Reviewers: kcc, dvyukov, vitalybuka, cryptoad, eugenis, kubamracek, george.karpenkov
Subscribers: mgorny, llvm-commits, #sanitizers
Differential Revision: https://reviews.llvm.org/D54904
llvm-svn: 349138
Summary:
If the setcc already has the target desired type we can reach the getSetCC/getSExtOrTrunc after the MatchingVecType check with the exact same types as the nodes we started with. This causes those causes VsetCC to be CSEd to N0 and the getSExtOrTrunc will CSE to N. When we return N, the caller will think that meant we called CombineTo and did our own worklist management. But that's not what happened. This prevents target hooks from being called for the node.
To fix this, I've now returned SDValue if the setcc is already the desired type. But to avoid some regressions in X86 I've had to disable one of the target combines that wasn't being reached before in the case of a (sext (setcc)). If we get vector widening legalization enabled that entire function will be deleted anyway so hopefully this is only for the short term.
Reviewers: RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55459
llvm-svn: 349137
Summary:
Use `vector<char> Added + vector<size_t> ToProcess` to replace `SetVector ToProcess`
We also check `Added[P]` to enqueueing a point more than once, which
also saves us a `ClusterIdForPoint_[Q].isUndef()` check.
Reviewers: courbet, RKSimon, gchatelet, john.brawn, lebedev.ri
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54442
llvm-svn: 349136
Summary:
The two utility functions were added in D47919 to support SHT_RELR.
However, these are just relative relocations types and are't
necessarily be named Relr.
Reviewers: phosek, dberris
Reviewed By: dberris
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55691
llvm-svn: 349133
It's included in a new header ClangTidyForceLinker.h and should not
be included the second time.
Follow up for the https://reviews.llvm.org/D55595
llvm-svn: 349132
Extract code that forces linking to the separate header and include it in both plugin and standalone tool.
Try 2: missing header guard and "clang/Config/config.h" are added to the new header.
Differential Revision: https://reviews.llvm.org/D55595
llvm-svn: 349131
DataExtractor::getU64 modifies the OffsetPtr which also pass to
RelocateOrElse which breaks on Windows. This addresses the issue
introduced in r349120.
Differential Revision: https://reviews.llvm.org/D55689
llvm-svn: 349129
Move some diagnostics around between Diagnostic*Kinds.td files. Diagnostics
used in multiple places were moved to DiagnosticCommonKinds.td. Diagnostics
listed in the wrong place (ie, Sema diagnostics listed in
DiagnosticsParseKinds.td) were moved to the correct places. One diagnostic
split into two so that the diagnostic string is in the .td file instead of in
code. Cleaned up the diagnostic includes after all the changes.
llvm-svn: 349125
Summary:
The diagnostics from google-objc-function-naming check will be more
actionable if they provide a brief description of the requirements from
the Google Objective-C style guide. The more descriptive diagnostics may
help clarify that functions in the global namespace must have an
appropriate prefix followed by Pascal case (engineers working previously
with static functions might not immediately understand the different
requirements of static and non-static functions).
Test Notes:
Verified against the clang-tidy tests.
Reviewers: benhamilton, aaron.ballman
Reviewed By: benhamilton
Subscribers: MyDeveloperDay, xazax.hun, cfe-commits
Differential Revision: https://reviews.llvm.org/D55482
llvm-svn: 349123
When the instrumented binary is linked as PIE, we need to apply the
relative relocations to sleds. This is handled by the dynamic linker
at runtime, but when processing the file we have to do it ourselves.
Differential Revision: https://reviews.llvm.org/D55542
llvm-svn: 349120
build version load commands in the object file
This commit introduces a new metadata node called "SDK Version". It will be set
by the frontend to mark the platform SDK (macOS/iOS/etc) version which was used
during that particular compilation.
This node is used when machine code is emitted, by either saving the SDK version
into the appropriate macho load command (version min/build version), or by
emitting the assembly for these load commands with the SDK version specified as
well.
The assembly for both load commands is extended by allowing it to contain the
sdk_version X, Y [, Z] trailing directive to represent the SDK version
respectively.
rdar://45774000
Differential Revision: https://reviews.llvm.org/D55612
llvm-svn: 349119
This reverts commit r349064.
This wasn't updating the right test. Causing (not the different line number
from the previous revert):
======================================================================
FAIL: test_diagnostic_warning (tests.cindex.test_diagnostics.TestDiagnostics)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/Users/buildslave/jenkins/workspace/clang-stage1-configure-RA/llvm/tools/clang/bindings/python/tests/cindex/test_diagnostics.py", line 18, in test_diagnostic_warning
self.assertEqual(len(tu.diagnostics), 2)
AssertionError: 1 != 2
llvm-svn: 349118
Summary:
A recent update to the VS toolchain in chromium [1] broke the windows
ASan bot because the new toolchain calls _msize_base() instead of
_msize() in a number of _aligned_* UCRT routines. Instrument
_msize_base() as well.
[1] https://crbug.com/914947
Reviewers: rnk, #sanitizers, vitalybuka
Reviewed By: rnk, #sanitizers, vitalybuka
Subscribers: vitalybuka, kubamracek, llvm-commits
Differential Revision: https://reviews.llvm.org/D55684
llvm-svn: 349115
intrin.h had forward declarations for these and lzcntintrin.h had implementations that were only available with -mlzcnt or a -march that supported the lzcnt feature.
For MS compatibility we should always have these builtins available regardless of X86 being the target or the CPU support the lzcnt instruction. The backends should be able to gracefully fallback to something support even if its just shifts and bit ops.
Unfortunately, gcc also implements 2 of the 3 function names here on X86 when lzcnt feature is enabled.
This patch adds builtins for these for MSVC compatibility and drops the forward declarations from intrin.h. To keep the gcc compatibility the two intrinsics that collided have been turned into macros that use the X86 specific builtins with the lzcnt feature check. These macros are only defined when _MSC_VER is not defined. Without them being macros we can get a redefinition error because -ms-extensions doesn't seem to set _MSC_VER but does make the MS builtins available.
Should fix PR40014
Differential Revision: https://reviews.llvm.org/D55677
llvm-svn: 349098
This is slightly involved, see the comments in the code.
The GN build now builds a functional lld!
Differential Revision: https://reviews.llvm.org/D55606
llvm-svn: 349096
This isn't quite NFC, but I don't know how to expose
any outward diffs from these changes. Mostly, this
was confusing because it used 'VT' to refer to the
operand type rather the usual type of the input node.
There's also a large block at the end that is dedicated
solely to matching loads, but that wasn't obvious. This
could probably be split up into separate functions to
make it easier to see.
It's still not clear to me when we make certain transforms
because the legality and constant conditions are
intertwined in a way that might be improved.
llvm-svn: 349095
This requires the two callers to manifest a 0 to make EmitCmp call EmitTest.
I'm looking into changing how we combine TEST and flag setting instructions to not be part of lowering. And instead be part of DAG combine or isel. Which will mean EmitTest will probably become gutted and maybe disappear entirely.
llvm-svn: 349094
Fix the logic in the definition of the `ExynosShiftExPred` as a more
specific version of `ExynosShiftPred`. But, since `ExynosShiftExPred` is
not used yet, this change has NFC.
llvm-svn: 349091
The value returned by __kmp_now_nsec() can overflow 32-bit values causing
incorrect values to be returned. The overflow can end up causing a divide
by zero error because in __kmp_initialize_system_tick(), the value
(__kmp_now_nsec() - nsec) can end up being much larger than the numerator:
1e6 * (delay + (now - goal))
during a pathological timing where the current time calculated is much larger
than nsec. When this happens, the value of __kmp_ticks_per_msec is set to zero
which is then used as the denominator in the KMP_NOW_MSEC() macro leading to
the divide by zero error.
Differential Revision: https://reviews.llvm.org/D55300
llvm-svn: 349090
This patch adds the affinity format functionality introduced in OpenMP 5.0.
This patch adds: Two new environment variables:
OMP_DISPLAY_AFFINITY=TRUE|FALSE
OMP_AFFINITY_FORMAT=<string>
and Four new API:
1) omp_set_affinity_format()
2) omp_get_affinity_format()
3) omp_display_affinity()
4) omp_capture_affinity()
The affinity format functionality has two ICV's associated with it:
affinity-display-var (bool) and affinity-format-var (string).
The affinity-display-var enables/disables the functionality through the
envirable OMP_DISPLAY_AFFINITY. The affinity-format-var is a formatted
string with the special field types beginning with a '%' character
similar to printf
For example, the affinity-format-var could be:
"OMP: host:%H pid:%P OStid:%i num_threads:%N thread_num:%n affinity:{%A}"
The affinity-format-var is displayed by every thread implicitly at the beginning
of a parallel region when any thread's affinity has changed (including a brand
new thread being spawned), or explicitly using the omp_display_affinity() API.
The omp_capture_affinity() function can capture the affinity-format-var in a
char buffer. And omp_set|get_affinity_format() allow the user to set|get the
affinity-format-var explicitly at runtime. omp_capture_affinity() and
omp_get_affinity_format() both return the number of characters needed to hold
the entire string it tried to make (not including NULL character). If not
enough buffer space is available,
both these functions truncate their output.
Differential Revision: https://reviews.llvm.org/D55148
llvm-svn: 349089
ProfileSampleAccurate is used to indicate the profile has exact match to the
code to be optimized.
Previously ProfileSampleAccurate is handled in ProfileSummaryInfo::isColdCallSite
and ProfileSummaryInfo::isColdBlock. A better solution is to initialize function
entry count to 0 when ProfileSampleAccurate is true, so we don't have to handle
ProfileSampleAccurate in multiple places.
Differential Revision: https://reviews.llvm.org/D55660
llvm-svn: 349088
The host-side code can't (and should not) access the values that may
only exist on the device side. E.g. address of a __device__ function
does not exist on the host side as we don't generate the code for it there.
Differential Revision: https://reviews.llvm.org/D55663
llvm-svn: 349087
This updates the scan-build perl script to allow outputting to sarif in a more natural fashion by specifying -sarif as a command line argument, similar to how -plist is already supported.
llvm-svn: 349082
Fixes a bug where functions would get exported when building with
-fvisibility=hidden and defining _LIBCPP_DISABLE_VISIBILITY_ANNOTATIONS. No
visibility annotations should be added in this case.
The new logic for _LIBCPP_EXPORTED_FROM_ABI matches that of the other visibility
annotations around it.
Differential Revision: https://reviews.llvm.org/D55664
llvm-svn: 349080
Currently memcpyopt optimizes cases like
memset(a, byte, N);
memcpy(b, a, M);
to
memset(a, byte, N);
memset(b, byte, M);
if M <= N. Often this allows further simplifications down the line,
which drop the first memset entirely.
This patch extends this optimization for the case where M > N, but we
know that the bytes a[N..M] are undef due to alloca/lifetime.start.
This situation arises relatively often for Rust code, because Rust does
not initialize trailing structure padding and loves to insert redundant
memcpys. This also fixes https://bugs.llvm.org/show_bug.cgi?id=39844.
The previous version of this patch did not perform dependency checking
properly: While the dependency is checked at the position of the memset,
the used size must be that of the memcpy. Previously the size of the
memset was used, which missed modification in the region
MemSetSize..CopySize, resulting in miscompiles. The added tests cover
variations of this issue.
Differential Revision: https://reviews.llvm.org/D55120
llvm-svn: 349078
Summary:
In particular we implement the `is_same<T,U>` templated type. This is
useful for doing compile-time comparison of types in `static_assert`s.
The plan is to use this in another patch (
https://reviews.llvm.org/D54904 ).
Reviewers: kcc, dvyukov, vitalybuka, cryptoad, eugenis, kubamracek, george.karpenkov
Subscribers: mgorny, #sanitizers, llvm-commits
Differential Revision: https://reviews.llvm.org/D54951
llvm-svn: 349077
Summary:
This patch computes the synthetic function entry count on the whole
program callgraph (based on module summary) and writes the entry counts
to the summary. After function importing, this count gets attached to
the IR as metadata. Since it adds a new field to the summary, this bumps
up the version.
Reviewers: tejohnson
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D43521
llvm-svn: 349076
Summary:
Macros are expanded on a single line. In case of large expansions,
with sufficiently many instructions with memory operands (and when
-fdebug-info-for-profiling is requested), we may be unable to generate
new base discriminator values - new values overflow (base
discriminators may not be larger than 2^12).
This CL warns instead of asserting in such a case. A subsequent CL
will add APIs to check for overflow before creating new debug info.
See https://bugs.llvm.org/show_bug.cgi?id=39890
Reviewers: davidxl, wmi, gbedwell
Reviewed By: davidxl
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D55643
llvm-svn: 349075
Summary:
llvm-size uses "isText()" etc. which seem to indicate whether the section contains code-like things, not whether or not it will actually go in the text segment when in a fully linked executable.
The unit test added (elf-sizes.test) shows some types of sections that cause discrepencies versus the GNU size tool. llvm-size is not correctly reporting sizes of things mapping to text/data segments, at least for ELF files.
This fixes pr38723.
Reviewers: echristo, Bigcheese, MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54369
llvm-svn: 349074
Summary:
This check uses the context of a subtraction expression as well as knowledge
about the Abseil Time types, to infer the type of the second operand of some
subtraction expressions in Duration conversions. For example:
absl::ToDoubleSeconds(duration) - foo
can become
absl::ToDoubleSeconds(duration - absl::Seconds(foo))
This ensures that time calculations are done in the proper domain, and also
makes it easier to further deduce the types of the second operands to these
expressions.
Reviewed By: JonasToth
Tags: #clang-tools-extra
Differential Revision: https://reviews.llvm.org/D55245
llvm-svn: 349073
This is split from D55452 with the correct patch this time.
Pairwise reductions require two shuffles on every level but the last. On the last level the two shuffles are <1, u, u, u...> and <0, u, u, u...>, but <0, u, u, u...> will be dropped by InstCombine/DAGCombine as being an identity shuffle.
Differential Revision: https://reviews.llvm.org/D55615
llvm-svn: 349072
Dan Liew