* Flag indicating 'we're parsing this auto typed variable's initializer' moved from VarDecl to Sema
* Temporary template parameter list for auto deduction is now allocated on the stack.
* Deduced 'auto' types are now uniqued.
llvm-svn: 126139
separately handle the case of a local declaration-specifier list,
including all types in the set of options. Fixes
<rdar://problem/8790735> and <rdar://problem/8662831>.
llvm-svn: 125594
allow ref-qualifiers on function types used as template type
arguments. GNU actually allows cv-qualifiers on function types in many
places where it shouldn't, so we currently categorize this as a GNU
extension.
llvm-svn: 124584
and turn on __has_feature(cxx_rvalue_references). The core rvalue
references proposal seems to be fully implemented now, pending lots
more testing.
llvm-svn: 124169
parameter packs (C++0x [dcl.fct]p13), including disambiguation between
unnamed function parameter packs and varargs (C++0x [dcl.fct]p14) for
cases like
void f(T...)
where T may or may not contain unexpanded parameter packs.
llvm-svn: 122520
disambiguate between an expression (for a bit-field width) and a type
(for a fixed underlying type). Since the disambiguation can be
expensive (due to tentative parsing), we perform a simplistic
disambiguation based on one-token lookahead before going into the
full-blown tentative parsing. Based on a patch by Daniel Wallin.
llvm-svn: 120582
protocol-qualifier list without a leading type (e.g., <#blah#>), don't
complain about it being an archaic protocol-qualifier list unless it
actually parses as one.
llvm-svn: 119805
using new/delete and OwningPtrs. After memory profiling Clang, I witnessed periodic leaks of these
objects; digging deeper into the code, it was clear that our management of these objects was a mess. The ownership rules were murky at best, and not always followed. Worse, there are plenty of error paths where we could screw up.
This patch introduces AttributeList::Factory, which is a factory class that creates AttributeList
objects and then blows them away all at once. While conceptually simple, most of the changes in
this patch just have to do with migrating over to the new interface. Most of the changes have resulted in some nice simplifications.
This new strategy currently holds on to all AttributeList objects during the lifetime of the Parser
object. This is easily tunable. If we desire to have more bound the lifetime of AttributeList
objects more precisely, we can have the AttributeList::Factory object (in Parser) push/pop its
underlying allocator as we enter/leave key methods in the Parser. This means that we get
simple memory management while still having the ability to finely control memory use if necessary.
Note that because AttributeList objects are now BumpPtrAllocated, we may reduce malloc() traffic
in many large files with attributes.
This fixes the leak reported in: <rdar://problem/8650003>
llvm-svn: 118675
missing the opening bracket '[', e.g.,
NSArray <CC>
at function scope. Previously, we would only give trivial completions
(const, volatile, etc.), because we're in a "declaration name"
scope. Now, we also provide completions for class methods of NSArray,
e.g.,
alloc
Note that we already had support for this after the first argument,
e.g.,
NSArray method:x <CC>
would get code completion for class methods of NSArray whose selector
starts with "method:". This was already present because we recover
as if NSArray method:x were a class message send missing the opening
bracket (which was committed in r114057).
llvm-svn: 114078
sends. These are far trickier than instance messages, because we
typically have something like
NSArray alloc]
where it appears to be a declaration of a variable named "alloc" up
until we see the ']' (or a ':'), and at that point we can't backtrace.
So, we use a combination of syntactic and semantic disambiguation to
treat this as a message send only when the type is an Objective-C type
and it has the syntax of a class message send (which would otherwise
be ill-formed).
llvm-svn: 114057
used in the default function argument as "used". Instead, when we
actually use the default argument, make another pass over the
expression to mark any used declarations as "used" at that point. This
addresses two kinds of related problems:
1) We were marking some declarations "used" that shouldn't be,
because we were marking them too eagerly.
2) We were failing to mark some declarations as "used" when we
should, if the first time it was instantiated happened to be an
unevaluated context, we wouldn't mark them again at a later point.
I've also added a potentially-handy visitor class template
EvaluatedExprVisitor, which only visits the potentially-evaluated
subexpressions of an expression. I bet this would have been useful for
noexcept...
Fixes PR5810 and PR8127.
llvm-svn: 113700
with comma-separated lists. We never actually used the comma
locations, nor did we store them in the AST, but we did manage to
waste time during template instantiation to produce fake locations.
llvm-svn: 113495
One who seeks the Tao unlearns something new every day.
Less and less remains until you arrive at non-action.
When you arrive at non-action,
nothing will be left undone.
llvm-svn: 112244
declarator. Here, we can only see a few things (e.g., cvr-qualifiers,
nested name specifiers) and we do not want to provide other non-macro
completions. Previously, we would end up in recovery mode and would
provide a large number of non-relevant completions.
llvm-svn: 111818
- move DeclSpec &c into the Sema library
- move ParseAST into the Parse library
Reflect this change in a thousand different includes.
Reflect this change in the link orders.
llvm-svn: 111667
lexed method declarations.
This avoid interference with tokens coming after the point where the default arg tokens were 'injected', e.g. for
typedef struct Inst {
void m(int x=0);
} *InstPtr;
when parsing '0' the next token would be '*' and things would be messed up.
llvm-svn: 110436
a function prototype is followed by a declarator if we
aren't parsing a K&R style identifier list.
Also, avoid skipping randomly after a declaration if a
semicolon is missing. Before we'd get:
t.c:3:1: error: expected function body after function declarator
void bar();
^
Now we get:
t.c:1:11: error: invalid token after top level declarator
void foo()
^
;
llvm-svn: 108105
allows Sema some limited access to the current scope, which we only
use in one way: when Sema is performing some kind of declaration that
is not directly driven by the parser (e.g., due to template
instantiatio or lazy declaration of a member), we can find the Scope
associated with a DeclContext, if that DeclContext is still in the
process of being parsed.
Use this to make the implicit declaration of special member functions
in a C++ class more "scope-less", rather than using the NULL Scope hack.
llvm-svn: 107491
In a line like:
(;
the semicolon leaves Parser:ParenCount unbalanced (it's 1 even though we stopped looking for a right paren).
This may affect later parsing and result in bad recovery for parsing errors.
llvm-svn: 106213
type that we expect to see at a given point in the grammar, e.g., when
initializing a variable, returning a result, or calling a function. We
don't prune the candidate set at all, just adjust priorities to favor
things that should type-check, using an ultra-simplified type system.
llvm-svn: 105128
1) Suppress diagnostics as soon as we form the code-completion
token, so we don't get any error/warning spew from the early
end-of-file.
2) If we consume a code-completion token when we weren't expecting
one, go into a code-completion recovery path that produces the best
results it can based on the context that the parser is in.
llvm-svn: 104585
declarator is incorrect. Not being a typename causes the parser to
dive down into the K&R identifier list handling stuff, which is almost
never the right thing to do.
Before:
r.c:3:17: error: expected ')'
void bar(intptr y);
^
r.c:3:9: note: to match this '('
void bar(intptr y);
^
r.c:3:10: error: a parameter list without types is only allowed in a function definition
void bar(intptr y);
^
After:
r.c:3:10: error: unknown type name 'intptr'; did you mean 'intptr_t'?
void bar(intptr y);
^~~~~~
intptr_t
r.c:1:13: note: 'intptr_t' declared here
typedef int intptr_t;
^
This fixes rdar://7980651 - poor recovery for bad type in the first arg of a C function
llvm-svn: 103783
when they are not complete (since we could not match them up to
anything) and ensuring that enum parsing can cope with dependent
elaborated-type-specifiers. Fixes PR6915 and PR6649.
llvm-svn: 102247
ConsumeAndStoreUntil would stop at tok::unknown when caching an inline method
definition while SkipUntil would go past it while parsing the method.
Fixes PR 6903.
llvm-svn: 102214
intended for redeclarations, fixing those that need it. Fixes PR6831.
This uncovered an issue where the C++ type-specifier-seq parsing logic
would try to perform name lookup on an identifier after it already had
a type-specifier, which could also lead to spurious ambiguity errors
(as in PR6831, but with a different test case).
llvm-svn: 101419
template definition. Do this both by being more tolerant of errors in
our asserts and by not dropping a variable declaration completely when
its initializer is ill-formed. Fixes the crash-on-invalid in PR6375,
but not the original issue.
llvm-svn: 97463
signal an error. This can happen even when the current token is '::' if
this is a ::new or ::delete expression.
This was an oversight in my recent parser refactor; fixes PR 5825.
llvm-svn: 97462
an *almost* always incorrect case. This only does the lookahead
in the insanely unlikely case, so it shouldn't impact performance.
On this testcase:
struct foo {
}
typedef int x;
Before:
t.c:3:9: error: cannot combine with previous 'struct' declaration specifier
typedef int x;
^
After:
t.c:2:2: error: expected ';' after struct
}
^
;
llvm-svn: 97403
propagating error conditions out of the various annotate-me-a-snowflake
routines. Generally (but not universally) removes redundant diagnostics
as well as, you know, not crashing on bad code. On the other hand,
I have just signed myself up to fix fiddly parser errors for the next
week. Again.
llvm-svn: 97221
or that's been hidden by a non-type (in C++).
The ideal C++ diagnostic here would note the hiding declaration, but this
is a good start.
llvm-svn: 96141
we would just leak them all over the place, with no clear ownership of
these objects at all. AttributeList objects would get leaked on both
error and non-error paths.
Note: I introduced the usage of llvm::OwningPtr<AttributeList> to
manage these objects, which is particularly useful for methods with
multiple return sites. In at least one method I used them even when
they weren't strictly necessary because it clarified the ownership
semantics and made the code easier to read. Should the excessive
'take()' and 'reset()' calls become a performance issue we can always
re-evaluate.
Note+1: I believe I have not introduced any double-frees, but it would
be nice for someone to review this.
This fixes <rdar://problem/7635046>.
llvm-svn: 95847
t.c:4:3: error: expected ';' at end of declaration list
int y;
^
t.c:4:8: warning: extra ';' inside a struct or union
int y;
^
t.c:6:1: warning: expected ';' at end of declaration list
};
^
After:
t.c:3:8: error: expected ';' at end of declaration list
int x // expected-error {{expected ';' at end of declaration list}}
^
;
t.c:5:8: warning: expected ';' at end of declaration list
int z
^
;
llvm-svn: 95038
the tag kind (union, struct, class, enum) over to the name of the tag,
if there is a name, since most clients want to point at the name.
llvm-svn: 94424
provide completions for @ keywords. Previously, we only provided
@-completions after an @ was actually typed, which is useful but
probably not the common case.
Also, make sure a few Objective-C 2.0 completions only show up when
Objective-C 2.0 support is enabled (the default).
llvm-svn: 93354
that name constructors, the endless joys of out-of-line constructor
definitions, and various other corner cases that the previous hack
never imagined. Fixes PR5688 and tightens up semantic analysis for
constructor names.
Additionally, fixed a problem where we wouldn't properly enter the
declarator scope of a parenthesized declarator. We were entering the
scope, then leaving it when we saw the ")"; now, we re-enter the
declarator scope before parsing the parameter list.
Note that we are forced to perform some tentative parsing within a
class (call it C) to tell the difference between
C(int); // constructor
and
C (f)(int); // member function
which is rather unfortunate. And, although it isn't necessary for
correctness, we use the same tentative-parsing mechanism for
out-of-line constructors to improve diagnostics in icky cases like:
C::C C::f(int); // error: C::C refers to the constructor name, but
// we complain nicely and recover by treating it as
// a type.
llvm-svn: 93322
C++ grammatical constructs that show up in top-level (namespace-level)
declarations, member declarations, template declarations, statements,
expressions, conditions, etc. For example, we now provide a pattern
for
static_cast<type>(expr)
when we can have an expression, or
using namespace identifier;
when we can have a using directive.
Also, improves the results of code completion at the beginning of a
top-level declaration. Previously, we would see value names (function
names, global variables, etc.); now we see types, namespace names,
etc., but no values.
llvm-svn: 93134
Magically fixes all the terrible lookup problems associated with not pushing
a new scope. Resolves an ancient xfail and an LLVM misparse.
llvm-svn: 91769
The following attributes are currently supported in C++0x attribute
lists (and in GNU ones as well):
- align() - semantics believed to be conformant to n3000, except for
redeclarations and what entities it may apply to
- final - semantics believed to be conformant to CWG issue 817's proposed
wording, except for redeclarations
- noreturn - semantics believed to be conformant to n3000, except for
redeclarations
- carries_dependency - currently ignored (this is an optimization hint)
llvm-svn: 89543
handling template template parameters properly. This refactoring:
- Parses template template arguments as id-expressions, representing
the result of the parse as a template name (Action::TemplateTy)
rather than as an expression (lame!).
- Represents all parsed template arguments via a new parser-specific
type, ParsedTemplateArgument, which stores the kind of template
argument (type, non-type, template) along with all of the source
information about the template argument. This replaces an ad hoc
set of 3 vectors (one for a void*, which was either a type or an
expression; one for a bit telling whether the first was a type or
an expression; and one for a single source location pointing at
the template argument).
- Moves TemplateIdAnnotation into the new Parse/Template.h. It never
belonged in the Basic library anyway.
llvm-svn: 86708
appears in a deprecated context. In the new strategy, we emit the warnings
as usual unless we're currently parsing a declaration, where "declaration" is
restricted to mean a decl group or a few special cases in Objective C. If
we *are* parsing a declaration, we queue up the deprecation warnings until
the declaration has been completely parsed, and then emit them only if the
decl is not deprecated.
We also standardize the bookkeeping for deprecation so as to avoid special cases.
llvm-svn: 85998
"->" with a use of ParseUnqualifiedId. Collapse
ActOnMemberReferenceExpr, ActOnDestructorReferenceExpr (both of them),
ActOnOverloadedOperatorReferenceExpr,
ActOnConversionOperatorReferenceExpr, and
ActOnMemberTemplateIdReferenceExpr into a single, new action
ActOnMemberAccessExpr that does the same thing more cleanly (and can
keep more source-location information).
llvm-svn: 85930
declarators are parsed primarily within a single function (at least for
these cases). Remove some excess diagnostics arising during parse failures.
llvm-svn: 85924
representation of a C++ unqualified-id, along with a single parsing
function (Parser::ParseUnqualifiedId) that will parse all of the
various forms of unqualified-id in C++.
Replace the representation of the declarator name in Declarator with
the new UnqualifiedId class, simplifying declarator-id parsing
considerably and providing more source-location information to
Sema. In the future, I hope to migrate all of the other
unqualified-id-parsing code over to this single representation, then
begin to merge actions that are currently only different because we
didn't have a unqualified notion of the name in the parser.
llvm-svn: 85851
unknown type name, e.g.,
foo::bar x;
when "bar" does not refer to a type in "foo".
With this change, the parser now calls into the action to perform
diagnostics and can try to recover by substituting in an appropriate
type. For example, this allows us to easily diagnose some missing
"typename" specifiers, which we now do:
test/SemaCXX/unknown-type-name.cpp:29:1: error: missing 'typename'
prior to dependent type name 'A<T>::type'
A<T>::type A<T>::f() { return type(); }
^~~~~~~~~~
typename
Fixes PR3990.
llvm-svn: 84053
template void f<int>(int);
~~~~~~
Previously, we silently dropped the template arguments. With this
change, we now use the template arguments (when available) as the
explicitly-specified template arguments used to aid template argument
deduction for explicit template instantiations.
llvm-svn: 82806
member functions of class template specializations, and static data
members. The mechanics are (mostly) present, but the semantic analysis
is very weak.
llvm-svn: 82789
will provide the names of various enumerations currently
visible. Introduced filtering of code-completion results when we build
the result set, so that we can identify just the kinds of declarations
we want.
This implementation is incomplete for C++, since we don't consider
that the token after the tag keyword could start a
nested-name-specifier.
llvm-svn: 82222
x->Base::f
We no longer try to "enter" the context of the type that "x" points
to. Instead, we drag that object type through the parser and pass it
into the Sema routines that need to know how to perform lookup within
member access expressions.
We now implement most of the crazy name lookup rules in C++
[basic.lookup.classref] for non-templated code, including performing
lookup both in the context of the type referred to by the member
access and in the scope of the member access itself and then detecting
ambiguities when the two lookups collide (p1 and p4; p3 and p7 are
still TODO). This change also corrects our handling of name lookup
within template arguments of template-ids inside the
nested-name-specifier (p6; we used to look into the scope of the
object expression for them) and fixes PR4703.
I have disabled some tests that involve member access expressions
where the object expression has dependent type, because we don't yet
have the ability to describe dependent nested-name-specifiers starting
with an identifier.
llvm-svn: 80843
TypenameType if getTypeName is looking at a member of an unknown
specialization. This allows us to properly parse class templates that
derived from type that could only otherwise be described by a typename type,
e.g.,
template<class T> struct X {};
template<typename T> struct Y : public X<T>::X { };
Fixes PR4381.
llvm-svn: 80123
their members, including member class template, member function
templates, and member classes and functions of member templates.
To actually parse the nested-name-specifiers that qualify the name of
an out-of-line definition of a member template, e.g.,
template<typename X> template<typename Y>
X Outer<X>::Inner1<Y>::foo(Y) {
return X();
}
we need to look for the template names (e.g., "Inner1") as a member of
the current instantiation (Outer<X>), even before we have entered the
scope of the current instantiation. Since we can't do this in general
(i.e., we should not be looking into all dependent
nested-name-specifiers as if they were the current instantiation), we
rely on the parser to tell us when it is parsing a declaration
specifier sequence, and, therefore, when we should consider the
current scope specifier to be a current instantiation.
Printing of complicated, dependent nested-name-specifiers may be
somewhat broken by this commit; I'll add tests for this issue and fix
the problem (if it still exists) in a subsequent commit.
llvm-svn: 80044
and will participate in overload resolution. Unify the instantiation
of CXXMethodDecls and CXXConstructorDecls, which had already gotten
out-of-sync.
llvm-svn: 79658
elsewhere. Very slightly decouples DeclSpec users from knowing the exact
diagnostics to report, and makes it easier to provide different diagnostics in
some places.
llvm-svn: 77990
point that covers templates and non-templates. This should eliminate
the flood of warnings I introduced yesterday.
Removed the ActOnClassTemplate action, which is no longer used.
llvm-svn: 76881
Another case where we should use SmallVector::data() instead of taking the
address of element 0 of a SmallVector when the SmallVector has no elements.
llvm-svn: 74556
C++. This logic is required to trigger implicit instantiation of
function templates and member functions of class templates, which will
be implemented separately.
This commit includes support for -Wunused-parameter, printing warnings
for named parameters that are not used within a function/Objective-C
method/block. Fixes <rdar://problem/6505209>.
llvm-svn: 73797
specifier resulted in the creation of a new TagDecl node, which
happens either when the tag specifier was a definition or when the tag
specifier was the first declaration of that tag type. This information
has several uses, the first of which is implemented in this commit:
1) In C++, one is not allowed to define tag types within a type
specifier (e.g., static_cast<struct S { int x; } *>(0) is
ill-formed) or within the result or parameter types of a
function. We now diagnose this.
2) We can extend DeclGroups to contain information about any tags
that are declared/defined within the declaration specifiers of a
variable, e.g.,
struct Point { int x, y, z; } p;
This will help improve AST printing and template instantiation,
among other things.
3) For C99, we can keep track of whether a tag type is defined
within the type of a parameter, to properly cope with cases like,
e.g.,
int bar(struct T2 { int x; } y) {
struct T2 z;
}
We can also do similar things wherever there is a type specifier,
e.g., to keep track of where the definition of S occurs in this
legal C99 code:
(struct S { int x, y; } *)0
llvm-svn: 72555
-Makes typeof consistent with sizeof/alignof
-Fixes a bug when '>' is in a typeof expression, inside a template type param:
A<typeof(x>1)> a;
llvm-svn: 72255
redundant functionality. The result (ASTOwningVector) lives in
clang/Parse/Ownership.h and is used by both the parser and semantic
analysis. No intended functionality change.
llvm-svn: 72214
template class X<int>;
This also cleans up the propagation of template information through
declaration parsing, which is used to improve some diagnostics.
llvm-svn: 71608
parse just a single declaration and provide a reasonable diagnostic
when the "only one declarator per template declaration" rule is
violated. This eliminates some ugly, ugly hackery where we used to
require thatn the layout of a DeclGroup of a single element be the
same as the layout of a single declaration.
llvm-svn: 71596
This gets rid of a bunch of random InvalidDecl bools in sema, changing
us to use the following approach:
1. When analyzing a declspec or declarator, if an error is found, we
set a bit in Declarator saying that it is invalid.
2. Once the Decl is created by sema, we immediately set the isInvalid
bit on it from what is in the declarator. From this point on, sema
consistently looks at and sets the bit on the decl.
This gives a very clear separation of concerns and simplifies a bunch
of code. In addition to this, this patch makes these changes:
1. it renames DeclSpec::getInvalidType() -> isInvalidType().
2. various "merge" functions no longer return bools: they just set the
invalid bit on the dest decl if invalid.
3. The ActOnTypedefDeclarator/ActOnFunctionDeclarator/ActOnVariableDeclarator
methods now set invalid on the decl returned instead of returning an
invalid bit byref.
4. In SemaType, refering to a typedef that was invalid now propagates the
bit into the resultant type. Stuff declared with the invalid typedef
will now be marked invalid.
5. Various methods like CheckVariableDeclaration now return void and set the
invalid bit on the decl they check.
There are a few minor changes to tests with this, but the only major bad
result is test/SemaCXX/constructor-recovery.cpp. I'll take a look at this
next.
llvm-svn: 70020
by correctly propagating the fact that the type was invalid up to the
attributeRuns decl, then returning an ExprError when attributeRuns is
formed (like we do for normal declrefexprs).
llvm-svn: 69998
nested name specifiers. Now we emit stuff like:
t.cpp:8:13: error: unknown type name 'X'
static foo::X P;
~~~~ ^
instead of:
t.cpp:8:16: error: invalid token after top level declarator
static foo::X P;
^
This is inspired by a really awful error message I got from
g++ when I misspelt diag::kind as diag::Kind.
llvm-svn: 69086
that I noticed working on other things.
Instead of emitting:
t2.cc:1:8: error: use of undeclared identifier 'g'
int x(*g);
^
t2.cc:1:10: error: expected ')'
int x(*g);
^
t2.cc:1:6: note: to match this '('
int x(*g);
^
We now only emit:
t2.cc:1:7: warning: type specifier missing, defaults to 'int'
int x(*g);
^
Note that the example in SemaCXX/nested-name-spec.cpp:f4 is still
not great, we now produce both of:
void f4(undef::C); // expected-error {{use of undeclared identifier 'undef'}} \
expected-error {{variable has incomplete type 'void'}}
The second diagnostic should be silenced by something getting marked invalid.
I don't plan to fix this though.
llvm-svn: 68919
struct xyz { int y; };
enum abc { ZZZ };
static xyz b;
abc c;
we used to produce:
t2.c:4:8: error: unknown type name 'xyz'
static xyz b;
^
t2.c:5:1: error: unknown type name 'abc'
abc c;
^
we now produce:
t2.c:4:8: error: use of tagged type 'xyz' without 'struct' tag
static xyz b;
^
struct
t2.c:5:1: error: use of tagged type 'abc' without 'enum' tag
abc c;
^
enum
GCC produces the normal:
t2.c:4: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘b’
t2.c:5: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘c’
rdar://6783347
llvm-svn: 68914
which tries to do better error recovery when it is "obvious" that an
identifier is a mis-typed typename. In this case, we try to parse
it as a typename instead of as the identifier in a declarator, which
gives us several options for better error recovery and immediately
makes diagnostics more useful. For example, we now produce:
t.c:4:8: error: unknown type name 'foo_t'
static foo_t a = 4;
^
instead of:
t.c:4:14: error: invalid token after top level declarator
static foo_t a = 4;
^
Also, since we now parse "a" correctly, we make a decl for it,
preventing later uses of 'a' from emitting things like:
t.c:12:20: error: use of undeclared identifier 'a'
int bar() { return a + b; }
^
I'd really appreciate any scrutiny possible on this, it
is a tricky area.
llvm-svn: 68911
of the range is now the ';' location. For something like this:
$ cat t2.c
#define bool int
void f(int x, int y) {
bool b = !x && y;
}
We used to produce:
$ clang-cc t2.c -ast-dump
typedef char *__builtin_va_list;
void f(int x, int y)
(CompoundStmt 0x2201f10 <t2.c:3:22, line:5:1>
(DeclStmt 0x2201ef0 <line:2:14> <----
0x2201a20 "int b =
(BinaryOperator 0x2201ed0 <line:4:10, col:16> 'int' '&&'
(UnaryOperator 0x2201e90 <col:10, col:11> 'int' prefix '!'
(DeclRefExpr 0x2201c90 <col:11> 'int' ParmVar='x' 0x2201a50))
(DeclRefExpr 0x2201eb0 <col:16> 'int' ParmVar='y' 0x2201e10))")
Now we produce:
$ clang-cc t2.c -ast-dump
typedef char *__builtin_va_list;
void f(int x, int y)
(CompoundStmt 0x2201f10 <t2.c:3:22, line:5:1>
(DeclStmt 0x2201ef0 <line:2:14, line:4:17> <------
0x2201a20 "int b =
(BinaryOperator 0x2201ed0 <col:10, col:16> 'int' '&&'
(UnaryOperator 0x2201e90 <col:10, col:11> 'int' prefix '!'
(DeclRefExpr 0x2201c90 <col:11> 'int' ParmVar='x' 0x2201a50))
(DeclRefExpr 0x2201eb0 <col:16> 'int' ParmVar='y' 0x2201e10))")
llvm-svn: 68288
failures that involve malformed types, e.g., "typename X::foo" where
"foo" isn't a type, or "std::vector<void>" that doens't instantiate
properly.
Similarly, be a bit smarter in our handling of ambiguities that occur
in Sema::getTypeName, to eliminate duplicate error messages about
ambiguous name lookup.
This eliminates two XFAILs in test/SemaCXX, one of which was crying
out to us, trying to tell us that we were producing repeated error
messages.
llvm-svn: 68251
within nested-name-specifiers, e.g., for the "apply" in
typename MetaFun::template apply<T1, T2>::type
At present, we can't instantiate these nested-name-specifiers, so our
testing is sketchy.
llvm-svn: 68081
productions (except the already broken ObjC cases like @class X,Y;) in
the parser that can produce more than one Decl return a DeclGroup instead
of a Decl, etc.
This allows elimination of the Decl::NextDeclarator field, and exposes
various clients that should look at all decls in a group, but which were
only looking at one (such as the dumper, printer, etc). These have been
fixed.
Still TODO:
1) there are some FIXME's in the code about potentially using
DeclGroup for better location info.
2) ParseObjCAtDirectives should return a DeclGroup due to @class etc.
3) I'm not sure what is going on with StmtIterator.cpp, or if it can
be radically simplified now.
4) I put a truly horrible hack in ParseTemplate.cpp.
I plan to bring up #3/4 on the mailing list, but don't plan to tackle
#1/2 in the short term.
llvm-svn: 68002
pointer. Its purpose in life is to be a glorified void*, but which does not
implicitly convert to void* or other OpaquePtr's with a different UID.
Introduce Action::DeclPtrTy which is a typedef for OpaquePtr<0>. Change the
entire parser/sema interface to use DeclPtrTy instead of DeclTy*. This
makes the C++ compiler enforce that these aren't convertible to other opaque
types.
We should also convert ExprTy, StmtTy, TypeTy, AttrTy, BaseTy, etc,
but I don't plan to do that in the short term.
The one outstanding known problem with this patch is that we lose the
bitmangling optimization where ActionResult<DeclPtrTy> doesn't know how to
bitmangle the success bit into the low bit of DeclPtrTy. I will rectify
this with a subsequent patch.
llvm-svn: 67952
instantiation for C++ typename-specifiers such as
typename T::type
The parsing of typename-specifiers is relatively easy thanks to
annotation tokens. When we see the "typename", we parse the
typename-specifier and produce a typename annotation token. There are
only a few places where we need to handle this. We currently parse the
typename-specifier form that terminates in an identifier, but not the
simple-template-id form, e.g.,
typename T::template apply<U, V>
Parsing of nested-name-specifiers has a similar problem, since at this
point we don't have any representation of a class template
specialization whose template-name is unknown.
Semantic analysis is only partially complete, with some support for
template instantiation that works for simple examples.
llvm-svn: 67875
Richard Smith