The Lexer doesn't use this state itself. It is only set and used by AsmParser so it seems like it should just be part of AsmParser.
Differential Revision: https://reviews.llvm.org/D52515
llvm-svn: 343027
DWARF5 spec says about single file split case:
"The sections that do not require relocation, however, can be written
to the relocatable object (.o) file but ignored by the
the linker or they can be written to a separate DWARF object (.dwo) file
that need not be accessed by the linker."
Nice way to make linker to ignore them is to set SHF_EXCLUDE flag.
It seems to be not harmful to always set it for .dwo sections.
That is what this patch does.
Differential revision: https://reviews.llvm.org/D52303
llvm-svn: 342800
This patch adds the ability for processor models to describe dependency breaking
instructions.
Different processors may specify a different set of dependency-breaking
instructions.
That means, we cannot assume that all processors of the same target would use
the same rules to classify dependency breaking instructions.
The main goal of this patch is to provide the means to describe dependency
breaking instructions directly via tablegen, and have the following
TargetSubtargetInfo hooks redefined in overrides by tabegen'd
XXXGenSubtargetInfo classes (here, XXX is a Target name).
```
virtual bool isZeroIdiom(const MachineInstr *MI, APInt &Mask) const {
return false;
}
virtual bool isDependencyBreaking(const MachineInstr *MI, APInt &Mask) const {
return isZeroIdiom(MI);
}
```
An instruction MI is a dependency-breaking instruction if a call to method
isDependencyBreaking(MI) on the STI (TargetSubtargetInfo object) evaluates to
true. Similarly, an instruction MI is a special case of zero-idiom dependency
breaking instruction if a call to STI.isZeroIdiom(MI) returns true.
The extra APInt is used for those targets that may want to select which machine
operands have their dependency broken (see comments in code).
Note that by default, subtargets don't know about the existence of
dependency-breaking. In the absence of external information, those method calls
would always return false.
A new tablegen class named STIPredicate has been added by this patch to let
processor models classify instructions that have properties in common. The idea
is that, a MCInstrPredicate definition can be used to "generate" an instruction
equivalence class, with the idea that instructions of a same class all have a
property in common.
STIPredicate definitions are essentially a collection of instruction equivalence
classes.
Also, different processor models can specify a different variant of the same
STIPredicate with different rules (i.e. predicates) to classify instructions.
Tablegen backends (in this particular case, the SubtargetEmitter) will be able
to process STIPredicate definitions, and automatically generate functions in
XXXGenSubtargetInfo.
This patch introduces two special kind of STIPredicate classes named
IsZeroIdiomFunction and IsDepBreakingFunction in tablegen. It also adds a
definition for those in the BtVer2 scheduling model only.
This patch supersedes the one committed at r338372 (phabricator review: D49310).
The main advantages are:
- We can describe subtarget predicates via tablegen using STIPredicates.
- We can describe zero-idioms / dep-breaking instructions directly via
tablegen in the scheduling models.
In future, the STIPredicates framework can be used for solving other problems.
Examples of future developments are:
- Teach how to identify optimizable register-register moves
- Teach how to identify slow LEA instructions (each subtarget defining its own
concept of "slow" LEA).
- Teach how to identify instructions that have undocumented false dependencies
on the output registers on some processors only.
It is also (in my opinion) an elegant way to expose knowledge to both external
tools like llvm-mca, and codegen passes.
For example, machine schedulers in LLVM could reuse that information when
internally constructing the data dependency graph for a code region.
This new design feature is also an "opt-in" feature. Processor models don't have
to use the new STIPredicates. It has all been designed to be as unintrusive as
possible.
Differential Revision: https://reviews.llvm.org/D52174
llvm-svn: 342555
In r319995, we fixed the line table format to version 2 on Darwin
because dsymutil didn't yet understand the new format which caused test
failures for the LLDB bots. This has been resolved in the meantime so
there's no reason to keep this limitation.
rdar://problem/35968332
llvm-svn: 342136
The main use case for this directive is to allow assembly writers to
write their own FPO data strings without going through the .cv_fpo*
directive family.
I'm experimenting with different RPN programs to fix PR38857, and I
figured I should go ahead and make this directive permanent.
llvm-svn: 341712
SHF_ARM_PURECODE flag when being built with the -mexecute-only flag.
All code sections of an ELF must have the flag set for the final .text
section to be execute-only, otherwise the flag gets removed.
A HasData flag is added to MCSection to aid in the determination that
the section is empty. A virtual setTargetSectionFlags is added to
MCELFObjectTargetWriter to allow subclasses to set target specific
section flags to be added to sections which we then use in the ARM
backend to set SHF_ARM_PURECODE.
Patch by Ivan Lozano!
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D48792
llvm-svn: 341593
Remove braces around two, single statement "if" blocks in line with rest
of the file and the general LLVM code style. NFC, testing commit access.
llvm-svn: 341294
Summary:
Per clang-tidy:
function 'llvm::MCStreamer::checkCVLocSection' has a definition with different parameter names
.../llvm/lib/MC/MCStreamer.cpp:275:18: the definition seen here
.../llvm/include/llvm/MC/MCStreamer.h:235:8: differing parameters are named here: ('FuncId'), in definition: ('FunctionId')
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51406
llvm-svn: 340912
I am experimenting with a single split dwarf (.dwo sections in .o files).
I want to make linker to ignore .dwo sections in .o, for that I am trying to add
SHF_EXCLUDE flag ("E") for them in my asm sample.
I found that currently, it is impossible to add any flag for debug sections using llvm-mc.
That happens because we have a set of predefined unique sections created early with default flags:
https://github.com/llvm-mirror/llvm/blob/master/lib/MC/MCObjectFileInfo.cpp#L391
This patch allows a user to add any flags he wants.
I had to edit TargetLoweringObjectFileImpl.cpp to set MetaData type for debug sections.
Their kind was Data by default (so they were allocatable) and so after changes introduced by
this patch the SHF_ALLOC flag was applied for them, what does not make sense for debug sections.
One of OrcJITTests tests failed because of that.
Differential revision: https://reviews.llvm.org/D51361
llvm-svn: 340904
Now that we create the label at the point of the directive, we don't
need to set the "current CV location", and then later when we emit the
next instruction, create a label for it and emit it.
DWARF still defers the labels used in .debug_loc until the next
instruction or value, for reasons unknown.
llvm-svn: 340883
Previously we followed the DWARF implementation, which waits until the
next instruction or data to emit the label to use in the .debug_loc
section. We might want to consider re-evaluating that design choice as
well, since it means the .loc skips alignment padding, for better or
worse.
This was the most minimal fix I could come up with, but we should be
able to do a lot of cleanups now that we don't need to save a pending CV
location on the CodeViewContext. I plan to do those next, but this
immediately fixes an assertion for some of our users.
llvm-svn: 340878
Summary:
For assembly input files, generate debug info even when the .file
directive is present, provided it does not include a file-number
argument. Fixes PR38695.
Reviewers: probinson, sidneym
Subscribers: aprantl, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D51315
llvm-svn: 340839
Summary:
Handle the case IDVal is an empty string.
This bug was uncovered by a LLVM MC Assembler Protocol Buffer
Fuzzer for the RISC-V assembly language.
Reviewers: rnk
Reviewed By: rnk
Subscribers: rnk, niravd, pcc, peter.smith, asb, grosbach, llvm-commits, bcain, kito-cheng, shiva0217, rogfer01, PkmX
Differential Revision: https://reviews.llvm.org/D50808
llvm-svn: 340678
Aligning section contents is not required, but only
recommended, by the specification. Microsoft's documentation says
(https://docs.microsoft.com/en-us/windows/desktop/debug/pe-format#section-table-section-headers):
"For object files, the value should be aligned on a 4-byte boundary
for best performance."
However, according to my measurements, aligning section contents has
a neutral to negative effect on performance.
I measured the median run time of 100 links of Chromium's
base_unittests on Linux with lld-link and on Windows with link.exe with
both aligned and unaligned sections. On Linux I didn't see a measurable
performance difference, and on Windows the link was slightly faster
with unaligned sections (presumably because on Windows the bottleneck
is I/O).
Also, the sections created by cl.exe are unaligned, so we should expect
tools to broadly accept unaligned sections.
Differential Revision: https://reviews.llvm.org/D51149
llvm-svn: 340514
The format is the same as in ELF: a sequence of ULEB128-encoded
symbol indexes.
Differential Revision: https://reviews.llvm.org/D51047
llvm-svn: 340499
wasm-lld expects relocation entries to be sorted by offset. In most
cases llvm produces them in order, but the CODE section (which combines
many MCSections) is an exception because we order the functions in
Symbol order, not in section order. What is more, its not clear weather
`recordRelocation` is guaranteed to be called in offset order so this
sort of most likely needed in the general case too.
Differential Revision: https://reviews.llvm.org/D51065
llvm-svn: 340423
Remove code for writing auxiliary symbols of type function definition
and begin function. These types of symbols are associated with
pre-CodeView debug info and we never emit them.
llvm-svn: 340113
Handle the case when the symbol is private. Private symbols are not in
the COFF object file symbol table, so they aren't inserted into
SymbolMap. We can't look up the section of the symbol that way. Instead,
get the MCSection from the MCSymbol and map that to the object file
section.
Print a better error message when the symbol has no section, like when
the symbol is undefined.
Fixes PR38607
llvm-svn: 339942
Allow the comparison of x86 registers in the evaluation of assembler
directives. This generalizes and simplifies the extension from r334022
to catch another case found in the Linux kernel.
Reviewers: rnk, void
Reviewed By: rnk
Subscribers: hiraditya, nickdesaulniers, llvm-commits
Differential Revision: https://reviews.llvm.org/D50795
llvm-svn: 339895
When emitting the difference between two symbols, the standard behavior is
that the difference will be resolved to an absolute value if both of the
symbols are offsets from the same data fragment. This is undesirable on
architectures such as RISC-V where relaxation in the linker may cause the
computed difference to become invalid. This caused an issue when compiling to
object code, where the size of a function in the debug information was already
calculated even though it could change as a consequence of relaxation in the
subsequent linking stage.
This patch inhibits the resolution of symbol differences to absolute values
where the target's AsmBackend has declared that it does not want these to be
folded.
Differential Revision: https://reviews.llvm.org/D45773
Patch by Edward Jones.
llvm-svn: 339864
Summary:
The TType encoding, LSDA encoding, and personality encoding are all
passed explicitly by CodeGen to the assembler through .cfi_* directives,
so only the AsmPrinter needs to know about them.
The FDE CFI encoding however, controls the encoding of the label
implicitly created by the .cfi_startproc directive. That directive seems
to be special in that it doesn't take an encoding, so the assembler just
has to know how to encode one DSO-local label reference from .eh_frame
to .text.
As a result, it looks like MC will continue to have to know when the
large code model is in use. Perhaps we could invent a '.cfi_startproc
[large]' flag so that this knowledge doesn't need to pollute the
assembler.
Reviewers: davide, lliu0, JDevlieghere
Subscribers: hiraditya, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D50533
llvm-svn: 339397
On Darwin we pin the DWARF line tables to version 2. Stop doing so for
DWARF v5 and later.
Differential revision: https://reviews.llvm.org/D49381
llvm-svn: 339288
This matches our behaviour for regular (i.e. relocated) references to
private symbols and therefore avoids needing to unnecessarily write
address-significant .L symbols to the object file's symbol table,
which can interfere with stack traces.
Fixes check-cfi after r339050.
llvm-svn: 339066
There are a bunch of edge cases and inconsistencies in how we're emitting sections
cause this warning to fire and it needs more work.
This reverts commit r335558.
llvm-svn: 338968
Getting the DWARF types section is only implemented for ELF object
files. We already disabled emitting debug types in clang (r337717), but
now we also report an fatal error (rather than crashing) when trying to
obtain this section in MC. Additionally we ignore the generate debug
types flag for unsupported target triples.
See PR38190 for more information.
Differential revision: https://reviews.llvm.org/D50057
llvm-svn: 338527
It is necessary to generate fixups in .debug_line as relaxation is
enabled due to the address delta may be changed after relaxation.
DWARF will record the mappings of lines and addresses in
.debug_line section. It will encode the information using special
opcodes, standard opcodes and extended opcodes in Line Number
Program. I use DW_LNS_fixed_advance_pc to encode fixed length
address delta and DW_LNE_set_address to encode absolute address
to make it possible to generate fixups in .debug_line section.
Differential Revision: https://reviews.llvm.org/D46850
llvm-svn: 338477
This patch teaches llvm-mca how to identify dependency breaking instructions on
btver2.
An example of dependency breaking instructions is the zero-idiom XOR (example:
`XOR %eax, %eax`), which always generates zero regardless of the actual value of
the input register operands.
Dependency breaking instructions don't have to wait on their input register
operands before executing. This is because the computation is not dependent on
the inputs.
Not all dependency breaking idioms are also zero-latency instructions. For
example, `CMPEQ %xmm1, %xmm1` is independent on
the value of XMM1, and it generates a vector of all-ones.
That instruction is not eliminated at register renaming stage, and its opcode is
issued to a pipeline for execution. So, the latency is not zero.
This patch adds a new method named isDependencyBreaking() to the MCInstrAnalysis
interface. That method takes as input an instruction (i.e. MCInst) and a
MCSubtargetInfo.
The default implementation of isDependencyBreaking() conservatively returns
false for all instructions. Targets may override the default behavior for
specific CPUs, and return a value which better matches the subtarget behavior.
In future, we should teach to Tablegen how to automatically generate the body of
isDependencyBreaking from scheduling predicate definitions. This would allow us
to expose the knowledge about dependency breaking instructions to the machine
schedulers (and, potentially, other codegen passes).
Differential Revision: https://reviews.llvm.org/D49310
llvm-svn: 338372
Even though gas doesn't document it, it has been supported there for
a very long time.
This produces the 32 bit relative virtual address (aka image relative
address) for a given symbol. ".rva foo" is essentially equal to
".long foo@imgrel".
Differential Revision: https://reviews.llvm.org/D49821
llvm-svn: 338063
The standard library functions ::isprint/std::isprint have platform-
and locale-dependent behavior which makes LLVM's output less
predictable. In particular, regression tests my fail depending on the
implementation of these functions.
Implement llvm::isPrint in StringExtras.h with a standard behavior and
replace all uses of ::isprint/std::isprint by a call it llvm::isPrint.
The function is inlined and does not look up language settings so it
should perform better than the standard library's version.
Such a replacement has already been done for isdigit, isalpha, isxdigit
in r314883. gtest does the same in gtest-printers.cc using the following
justification:
// Returns true if c is a printable ASCII character. We test the
// value of c directly instead of calling isprint(), which is buggy on
// Windows Mobile.
inline bool IsPrintableAscii(wchar_t c) {
return 0x20 <= c && c <= 0x7E;
}
Similar issues have also been encountered by Julia:
https://github.com/JuliaLang/julia/issues/7416
I noticed the problem myself when on Windows isprint('\t') started to
evaluate to true (see https://stackoverflow.com/questions/51435249) and
thus caused several unit tests to fail. The result of isprint doesn't
seem to be well-defined even for ASCII characters. Therefore I suggest
to replace isprint by a platform-independent version.
Differential Revision: https://reviews.llvm.org/D49680
llvm-svn: 338034
This reverts commit r337951.
While that kind of shared constant generally works fine in a MinGW
setting, it broke some cases of inline assembly that worked before:
$ cat const-asm.c
int MULH(int a, int b) {
int rt, dummy;
__asm__ (
"imull %3"
:"=d"(rt), "=a"(dummy)
:"a"(a), "rm"(b)
);
return rt;
}
int func(int a) {
return MULH(a, 1);
}
$ clang -target x86_64-win32-gnu -c const-asm.c -O2
const-asm.c:4:9: error: invalid variant '00000001'
"imull %3"
^
<inline asm>:1:15: note: instantiated into assembly here
imull __real@00000001(%rip)
^
A similar error is produced for i686 as well. The same test with a
target of x86_64-win32-msvc or i686-win32-msvc works fine.
llvm-svn: 338018
GNU binutils tools have no problems with this kind of shared constants,
provided that we actually hook it up completely in AsmPrinter and
produce a global symbol.
This effectively reverts SVN r335918 by hooking the rest of it up
properly.
This feature was implemented originally in SVN r213006, with no reason
for why it can't be used for MinGW other than the fact that GCC doesn't
do it while MSVC does.
Differential Revision: https://reviews.llvm.org/D49646
llvm-svn: 337951
This actually has nothing to do with the associative comdat sections
that aren't supported by GNU binutils ld.
Clarify the comments from SVN r335918 and use a separate flag for it.
Differential Revision: https://reviews.llvm.org/D49645
llvm-svn: 337757
Since SVN r335286, the .xdata sections are produced without an attached
symbol, which requires using a different syntax when printing assembly
output.
Instead of the usual syntax of '.section <name>,"dr",discard,<symbol>',
use '.section <name>,"dr"' + '.linkonce discard' (which is what GCC
uses for all assembly output).
This fixes PR38254.
Differential Revision: https://reviews.llvm.org/D49651
llvm-svn: 337756
This support was partial and temporary. Now that we have
wasm object file support its no longer needed.
Differential Revision: https://reviews.llvm.org/D48744
llvm-svn: 337222
and no use of DW_FORM_rnglistx with the DW_AT_ranges attribute.
Reviewer: aprantl
Differential Revision: https://reviews.llvm.org/D49214
llvm-svn: 336927
AT_NAME was being emitted before the directory paths were remapped. This
ensures that all paths are remapped before anything is emitted.
An additional test case has been added.
Note that this only works if the replacement string is an absolute path.
If not, then AT_decl_file believes the new path is a relative path, and
joins that path with the compilation directory. I do not know of a good
way to resolve this.
Patch by: Siddhartha Bagaria (starsid)
Differential revision: https://reviews.llvm.org/D49169
llvm-svn: 336793
When manually finishing the object writer in dsymutil, it's possible
that there are pending labels that haven't been resolved. This results
in an assertion when the assembler tries to fixup a label that doesn't
have an address yet.
Differential revision: https://reviews.llvm.org/D49131
llvm-svn: 336688
debug compilation dir when compiling assembly files with -g.
Part of PR38050.
Patch by Siddhartha Bagaria!
Differential Revision: https://reviews.llvm.org/D48988
llvm-svn: 336680
On darwin, all virtual sections have zerofill type, and having a
.zerofill directive in a non-virtual section is not allowed. Instead of
asserting, show a nicer error.
In order to use the equivalent of .zerofill in a non-virtual section,
the usage of .zero of .space is required.
This patch replaces the assert with an error.
Differential Revision: https://reviews.llvm.org/D48517
llvm-svn: 336127
section flags in the ELF assembler. This matches the defaults
given in the rest of MC.
Fixes PR37997 where we couldn't assemble our own assembly output
without warnings.
llvm-svn: 336072
There are quite a few if statements that enumerate all these cases. It gets
even worse in our fork of LLVM where we also have a Triple::cheri (which
is mips64 + CHERI instructions) and we had to update all if statements that
check for Triple::mips64 to also handle Triple::cheri. This patch helps to
reduce our diff to upstream and should also make some checks more readable.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D48548
llvm-svn: 335493
DWARF v5 explicitly represents file #0 in the line table. Prior
versions did not, so ".loc 0" is still an error in those cases.
Differential Revision: https://reviews.llvm.org/D48452
llvm-svn: 335350
With compilation fix.
Original commit message:
D39788 added a '.stack-size' section containing metadata on function stack sizes
to output ELF files behind the new -stack-size-section flag.
This change does following two things on top:
1) Imagine the case when there are -ffunction-sections flag given and there are text sections in COMDATs.
The patch adds a '.stack-size' section into corresponding COMDAT group, so that linker will be able to
eliminate them fast during resolving the COMDATs.
2) Patch sets a SHF_LINK_ORDER flag and links '.stack-size' with the corresponding .text.
With that linker will be able to do -gc-sections on dead stack sizes sections.
Differential revision: https://reviews.llvm.org/D46874
llvm-svn: 335336
D39788 added a '.stack-size' section containing metadata on function stack sizes
to output ELF files behind the new -stack-size-section flag.
This change does following two things on top:
1) Imagine the case when there are -ffunction-sections flag given and there are text sections in COMDATs.
The patch adds a '.stack-size' section into corresponding COMDAT group, so that linker will be able to
eliminate them fast during resolving the COMDATs.
2) Patch sets a SHF_LINK_ORDER flag and links '.stack-size' with the corresponding .text.
With that linker will be able to do -gc-sections on dead stack sizes sections.
Differential revision: https://reviews.llvm.org/D46874
llvm-svn: 335332
Summary:
GCC and the binutils COFF linker do comdats differently from MSVC.
If we want to be ABI compatible, we have to do what they do, which is to
emit unique section names like ".text$_Z3foov" instead of short section
names like ".text". Otherwise, the binutils linker gets confused and
reports multiple definition errors when two object files from GCC and
Clang containing the same inline function are linked together.
The best description of the issue is probably at
https://github.com/Alexpux/MINGW-packages/issues/1677, we don't seem to
have a good one in our tracker.
I fixed up the .pdata and .xdata sections needed everywhere other than
32-bit x86. GCC doesn't use associative comdats for those, it appears to
rely on the section name.
Reviewers: smeenai, compnerd, mstorsjo, martell, mati865
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D48402
llvm-svn: 335286
This patch teaches llvm-mca how to identify register writes that implicitly zero
the upper portion of a super-register.
On X86-64, a general purpose register is implemented in hardware as a 64-bit
register. Quoting the Intel 64 Software Developer's Manual: "an update to the
lower 32 bits of a 64 bit integer register is architecturally defined to zero
extend the upper 32 bits". Also, a write to an XMM register performed by an AVX
instruction implicitly zeroes the upper 128 bits of the aliasing YMM register.
This patch adds a new method named clearsSuperRegisters to the MCInstrAnalysis
interface to help identify instructions that implicitly clear the upper portion
of a super-register. The rest of the patch teaches llvm-mca how to use that new
method to obtain the information, and update the register dependencies
accordingly.
I compared the kernels from tests clear-super-register-1.s and
clear-super-register-2.s against the output from perf on btver2. Previously
there was a large discrepancy between the estimated IPC and the measured IPC.
Now the differences are mostly in the noise.
Differential Revision: https://reviews.llvm.org/D48225
llvm-svn: 335113
Enables using the high and high-adjusted symbol modifiers on thread local
storage modifers in powerpc assembly. Needed to be able to support 64 bit
thread-pointer and dynamic-thread-pointer access sequences.
Differential Revision: https://reviews.llvm.org/D47754
llvm-svn: 334856
Add support for the "@high" and "@higha" symbol modifiers in powerpc64 assembly.
The modifiers represent accessing the segment consiting of bits 16-31 of a
64-bit address/offset.
Differential Revision: https://reviews.llvm.org/D47729
llvm-svn: 334855
Instruction bundling is only supported on descendants of the
MCEncodedFragment type. By moving the bundling functionality and
MCSubtargetInfo to this class it makes it easier to set and extract the
MCSubtargetInfo when it is necessary.
This is a refactoring change that will make it easier to pass the
MCSubtargetInfo through to writeNops when nop padding is required.
Differential Revision: https://reviews.llvm.org/D45959
llvm-svn: 334814
This reverts rL331412. We didn't up using fragment atoms
in the wasm object writer after all.
Differential Revision: https://reviews.llvm.org/D48173
llvm-svn: 334734
In some cases, for example when compiling a preprocessed file, the
front-end is not able to provide an MD5 checksum for all files. When
that happens, omit the MD5 checksums from the final DWARF, because
DWARF doesn't have a way to indicate that some but not all files have
a checksum.
When assembling a .s file, and some but not all .file directives
provide an MD5 checksum, issue a warning and don't emit MD5 into the
DWARF.
Fixes PR37623.
Differential Revision: https://reviews.llvm.org/D48135
llvm-svn: 334710
Don't provide the assembler source as the "root file" unless the user
asked to have debug info for the assembler source (with -g).
If the source doesn't provide an explicit ".file 0" then (a) use the
compilation directory as directory #0, and (b) use the file #1 info
for file #0 also.
Differential Revision: https://reviews.llvm.org/D48055
llvm-svn: 334512
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
This is a fix for the problem arising in D47374 (PR37678):
https://bugs.llvm.org/show_bug.cgi?id=37678
We may not have throughput info because it's not specified in the model
or it's not available with variant scheduling, so assume that those
instructions can execute/complete at max-issue-width.
Differential Revision: https://reviews.llvm.org/D47723
llvm-svn: 334055
Summary:
Allow extended parsing of variable assembler assignment syntax and modify X86 to permit
VAR = register assignment. As we emit these as .set directives when possible, we inline
such expressions in output assembly.
Fixes PR37425.
Reviewers: rnk, void, echristo
Reviewed By: rnk
Subscribers: nickdesaulniers, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D47545
llvm-svn: 334022
Object FIle Representation
At codegen time this is emitted into the ELF file a pair of symbol indices and a weight. In assembly it looks like:
.cg_profile a, b, 32
.cg_profile freq, a, 11
.cg_profile freq, b, 20
When writing an ELF file these are put into a SHT_LLVM_CALL_GRAPH_PROFILE (0x6fff4c02) section as (uint32_t, uint32_t, uint64_t) tuples as (from symbol index, to symbol index, weight).
Differential Revision: https://reviews.llvm.org/D44965
llvm-svn: 333823
This patch extends the MCSchedModel API with new methods that can be used to
obtain the latency and reciprocal througput information for an MCInst.
Scheduling models have recently gained the ability to resolve variant scheduling
classes associated with MCInst objects. Before, models were only able to resolve
a variant scheduling class from a MachineInstr object.
This patch is mainly required by D47374 to avoid regressing a pair of x86
specific -print-schedule tests for btver2. Patch D47374 introduces a new variant
class to teach the btver scheduling model (x86 target) how to correctly compute
the latency profile for some zero-idioms using the new scheduling predicates.
The new methods added by this patch would be mainly used by llc when flag
-print-schedule is specified. In particular, tests that contain inline assembly
require that code is parsed at code emission stage into a sequence of MCInst.
That forces the print-schedule functionality to query the latency/rthroughput
information for MCInst instructions too. If we don't expose this new API, then
we lose "-print-schedule" test coverage as soon as variant scheduling classes
are added to the x86 models.
The tablegen SubtargetEmitter changes teaches how to query latency profile
information using a object that derives from TargetSubtargetInfo. Note that this
should really have been part of r333286. To avoid code duplication, the logic
that "resolves" variant scheduling classes for MCInst, has been moved to a
common place in MC. That logic is used by the "resolveVariantSchedClass" methods
redefined in override by the tablegen'd GenSubtargetInfo classes.
Differential Revision: https://reviews.llvm.org/D47536
llvm-svn: 333650
For RISC-V it is desirable to have relaxation happen in the linker once
addresses are known, and as such the size between two instructions/byte
sequences in a section could change.
For most assembler expressions, this is fine, as the absolute address results
in the expression being converted to a fixup, and finally relocations.
However, for expressions such as .quad .L2-.L1, the assembler folds this down
to a constant once fragments are laid out, under the assumption that the
difference can no longer change, although in the case of linker relaxation the
differences can change at link time, so the constant is incorrect. One place
where this commonly appears is in debug information, where the size of a
function expression is in a form similar to the above.
This patch extends the assembler to allow an AsmBackend to declare that it
does not want the assembler to fold down this expression, and instead generate
a pair of relocations that allow the linker to carry out the calculation. In
this case, the expression is not folded, but when it comes to emitting a
fixup, the generic FK_Data_* fixups are converted into a pair, one for the
addition half, one for the subtraction, and this is passed to the relocation
generating methods as usual. I have named these FK_Data_Add_* and
FK_Data_Sub_* to indicate which half these are for.
For RISC-V, which supports this via e.g. the R_RISCV_ADD64, R_RISCV_SUB64 pair
of relocations, these are also set to always emit relocations relative to
local symbols rather than section offsets. This is to deal with the fact that
if relocations were calculated on e.g. .text+8 and .text+4, the result 12
would be stored rather than 4 as both addends are added in the linker.
Differential Revision: https://reviews.llvm.org/D45181
Patch by Simon Cook.
llvm-svn: 333079
This code appears to have been copied from the mach-o streamer. It has
no effect in ELF because indirect symbols are specific to mach-o.
llvm-svn: 332926
This class will be used to create regular, non-split ELF files.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47049
llvm-svn: 332870
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
Also clean up a couple of hacks where we were writing the section
contents to another stream by setting the object writer's stream,
writing and setting it back.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47038
llvm-svn: 332858
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
Avoid requirement that number of values must be known at assembler
time.
Fixes PR33586.
Reviewers: rnk, peter.smith, echristo, jyknight
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D46703
llvm-svn: 332741
For RISCV branch instructions, we need to preserve relocation types when linker
relaxation enabled, so then linker could modify offset when the branch offsets
changed.
We preserve relocation types by define shouldForceRelocation.
IsResolved return by evaluateFixup will always false when shouldForceRelocation
return true. It will make RISCV MC Branch Relaxation always relax 16-bit
branches to 32-bit form, even if the symbol actually could be resolved.
To avoid 16-bit branches always relax to 32-bit form when linker relaxation
enabled, we add a new parameter WasForced to indicate that the symbol actually
couldn't be resolved and not forced by shouldForceRelocation return true.
RISCVAsmBackend::fixupNeedsRelaxationAdvanced could relax branches with
unresolved symbols by (!IsResolved && !WasForced).
RISCV MC Branch Relaxation is needed because RISCV could perform 32-bit
to 16-bit transformation in MC layer.
Differential Revision: https://reviews.llvm.org/D46350
llvm-svn: 332696
The getAtom() method wasn't doing what we needed in all cases. We want
the symbols for the function which defines that section. We can compute
this easily enough and we know that we have at most one function in each
section.
Once this lands I will revert rL331412 which is no longer needed.
Fixes PR37409
Differential Revision: https://reviews.llvm.org/D46970
llvm-svn: 332517
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
These symbols only get included in the output symbols table if
they are used in a relocation.
This behaviour matches more closely the ELF object writer.
Differential Revision: https://reviews.llvm.org/D46561
llvm-svn: 332005
MCSymbol has getIndex/setIndex which are implementation defined
and on other platforms are used to store the symbol table
index. It makes sense to use this rather than invent a new
mapping.
Differential Revision: https://reviews.llvm.org/D46555
llvm-svn: 331705
Updated wasm section symbols names to match section name, and ensure all
referenced sections will have a symbol (per DWARF spec v3, Figure 43)
Patch by Yury Delendik!
Differential Revision: https://reviews.llvm.org/D46543
llvm-svn: 331664
This code previously existed only in MCMachOStreamer but is
useful for WebAssembly too. See: D46335
Differential Revision: https://reviews.llvm.org/D46297
llvm-svn: 331412
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Without this change, GCC 7 raises the warning below:
control reaches end of non-void function
Reviewers: sbc100, andreadb
Reviewed By: andreadb
Differential Revision: https://reviews.llvm.org/D46304
llvm-svn: 331255
The warning was (introduced in r331220):
lib/MC/WasmObjectWriter.cpp:51:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
llvm-svn: 331251
Teach AsmParser to check with Assembler for when evaluating constant
expressions. This improves the handing of preprocessor expressions
that must be resolved at parse time. This idiom can be found as
assembling-time assertion checks in source-level assemblers. Note that
this relies on the MCStreamer to keep sufficient tabs on Section /
Fragment information which the MCAsmStreamer does not. As a result the
textual output may fail where the equivalent object generation would
pass. This can most easily be resolved by folding the MCAsmStreamer
and MCObjectStreamer together which is planned for in a separate
patch.
Currently, this feature is only enabled for assembly input, keeping IR
compilation consistent between assembly and object generation.
Reviewers: echristo, rnk, probinson, espindola, peter.smith
Reviewed By: peter.smith
Subscribers: eraman, peter.smith, arichardson, jyknight, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45164
llvm-svn: 331218
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Summary:
Only allow a single unique .symver alias per symbol. This matches the
behavior of gas. I noticed that we ignored multiple mismatched symver
directives looking at https://reviews.llvm.org/D45798
Reviewers: pcc, tejohnson, espindola
Reviewed By: pcc
Subscribers: emaste, arichardson, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D45845
llvm-svn: 331078
Summary: Also test for symbols information in test/MC/WebAssembly/debug-info.ll.
Subscribers: jfb, dschuff, jgravelle-google, aheejin, sunfish, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46160
llvm-svn: 331005
If no data or instructions are emitted after a location directive, we
should clear the cv_loc when we change sections, or it will be emitted
at the beginning of the next section. This violates our invariant that
all .cv_loc directives belong to the same section. Add clearer
assertions for this.
llvm-svn: 330884
Remove the use of default argument in favor of a separate
startCustomSection method.
Differential Revision: https://reviews.llvm.org/D45794
llvm-svn: 330632
This is a temporary solution until a proper WASM implementation of
MCAsmParserExtension is in place, but at least for now will unblock this
path.
Added test to make sure this path works with the WASM Assembler.
Patch By Wouter van Oortmerssen!
Differential Revision: https://reviews.llvm.org/D45386
llvm-svn: 330370
TargetSchedModel now always delegates to MCSchedModel the computation of
instruction latency and reciprocal throughput.
No functional change intended.
llvm-svn: 330099
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: grosbach, void, ruiu
Reviewed By: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45138
llvm-svn: 330058
Previously the MD5 option of the .file directive provided the checksum
as a quoted hex string; now it's a normal hex number with 0x prefix,
same as the .octa directive accepts.
Differential Revision: https://reviews.llvm.org/D45459
llvm-svn: 329820
Summary:
Darwin dynamic linker can handle weak symbols in ConstDataSection.
ReadonReadOnlyWithRel symbols should be emitted in ConstDataSection
instead of normal DataSection.
rdar://problem/39298457
Reviewers: dexonsmith, kledzik
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45472
llvm-svn: 329752
Summary:
The LLVM SourceMgr class (which is used indirectly by Swift, though not Clang)
has a routine for looking up line numbers of SMLocs. This routine uses a
shared, special-purpose cache that handles exactly one access pattern
efficiently: looking up the line number of an SMLoc that points into the same
buffer as the last query made to the SourceMgr, at a location in the buffer at
or ahead of the last query.
When this works it's fine, but when it fails it's catastrophic for performancer:
one recent out-of-order access from a Swift utility routine ran for tens of
seconds, spending 99% of its time repeatedly scanning buffers for '\n'.
This change removes the shared cache from the SourceMgr and installs a new
cache in each SrcBuffer. The per-SrcBuffer caches are also "full", in the sense
that rather than caching a single last-query pointer, they cache _all_ the
line-ending offsets, in a binary-searchable array, such that once it's
populated (on first access), all subsequent access patterns run at the same
speed.
Performance measurements I've done show this is actually a little bit faster on
real codebases (though only a couple fractions of a percent). Memory usage is
up by a few tens to hundreds of bytes per SrcBuffer that has a line lookup done
on it; I've attempted to minimize this by using dynamic selection of integer
sized when storing offset arrays. But the main motive here is to
make-impossible the cases we don't always see, that show up by surprise when
there is an out-of-order access pattern.
Reviewers: jordan_rose
Reviewed By: jordan_rose
Subscribers: probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D45003
llvm-svn: 329470
Summary:
This patch implements a tablegen-driven Instruction Compression
mechanism for generating RISCV compressed instructions
(C Extension) from the expanded instruction form.
This tablegen backend processes CompressPat declarations in a
td file and generates all the compile-time and runtime checks
required to validate the declarations, validate the input
operands and generate correct instructions.
The checks include validating register operands, immediate
operands, fixed register operands and fixed immediate operands.
Example:
class CompressPat<dag input, dag output> {
dag Input = input;
dag Output = output;
list<Predicate> Predicates = [];
}
let Predicates = [HasStdExtC] in {
def : CompressPat<(ADD GPRNoX0:$rs1, GPRNoX0:$rs1, GPRNoX0:$rs2),
(C_ADD GPRNoX0:$rs1, GPRNoX0:$rs2)>;
}
The result is an auto-generated header file
'RISCVGenCompressEmitter.inc' which exports two functions for
compressing/uncompressing MCInst instructions, plus
some helper functions:
bool compressInst(MCInst& OutInst, const MCInst &MI,
const MCSubtargetInfo &STI,
MCContext &Context);
bool uncompressInst(MCInst& OutInst, const MCInst &MI,
const MCRegisterInfo &MRI,
const MCSubtargetInfo &STI);
The clients that include this auto-generated header file and
invoke these functions can compress an instruction before emitting
it, in the target-specific ASM or ELF streamer, or can uncompress
an instruction before printing it, when the expanded instruction
format aliases is favored.
The following clients were added to implement compression\uncompression
for RISCV:
1) RISCVAsmParser::MatchAndEmitInstruction:
Inserted a call to compressInst() to compresses instructions
parsed by llvm-mc coming from an ASM input.
2) RISCVAsmPrinter::EmitInstruction:
Inserted a call to compressInst() to compress instructions that
were lowered from Machine Instructions (MachineInstr).
3) RVInstPrinter::printInst:
Inserted a call to uncompressInst() to print the expanded
version of the instruction instead of the compressed one (e.g,
add s0, s0, a5 instead of c.add s0, a5) when -riscv-no-aliases
is not passed.
This patch squashes D45119, D42780 and D41932. It was reviewed in smaller patches by
asb, efriedma, apazos and mgrang.
Reviewers: asb, efriedma, apazos, llvm-commits, sabuasal
Reviewed By: sabuasal
Subscribers: mgorny, eraman, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, niosHD, kito-cheng, shiva0217, zzheng
Differential Revision: https://reviews.llvm.org/D45385
llvm-svn: 329455
This patch adds a way for users to create their own custom sections to
be added to wasm files. At the LLVM IR layer, they are defined through
the "wasm.custom_sections" named metadata. The expected use case for
this is bindings generators such as wasm-bindgen.
Patch by Dan Gohman
Differential Revision: https://reviews.llvm.org/D45297
llvm-svn: 329315
- MSVC was not OK with a static_assert referencing a non-static member
variable, even though it was just in a sizeof(expression). I move the
assert into the emit function, where it is probably more useful.
- Tests were failing in builds which did not have the X86 target
configured. Since this functionality is not target-specific, I have
removed the target specifiers from the .ll files.
llvm-svn: 329201
Summary:
This patch adds a DwarfAccelTableEmitter class, which generates an
accelerator table, as specified in DWARF v5 standard. At the moment it
only generates a DIE offset column and (if we are indexing more than one
compile unit) a CU column.
Indexing type units is not currently supported, as we don't even have
the ability to generate DWARF v5-compatible compile units.
The implementation is not data-source agnostic like the one generating
apple tables. This was not necessary as we currently only have one user
of this code, and without a second user it was not obvious to me how to
best abstract this. (The difference between these tables and the apple
ones is that they need a lot more metadata about the debug info they are
indexing).
The generation is triggered by the --accel-tables argument, which
supersedes the --dwarf-accel-tables arg -- the latter was a simple
on-off switch, but not we can choose between two kinds of accelerator
tables we can generate.
This is tested by parsing the generated tables with llvm-dwarfdump and
the DWARFVerifier, and I've also checked that GNU readelf is able to
make sense of the tables.
Differential Revision: https://reviews.llvm.org/D43286
llvm-svn: 329179
Summary:
Some targets do not support extended format of .loc directive and
support only simple format: .loc <FileID> <Line> <Column>. Patch adds
MCAsmInfo flag and option that allows emit .loc directive without
additional flags.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45184
llvm-svn: 329089
This should fix the problem reported by the lld buildbots:
- Builder lld-x86_64-darwin13, Build #19782
- Builder lld-perf-testsuite, Build #1419
llvm-svn: 329068
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
We emit the new syntax only for DWARF v5 and later.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328805
This reverts commit r328676.
Commit r328676 broke the -no-integrated-as flag necessary to build Linux kernel with Clang:
$ cat t.c
void foo() {}
$ clang -no-integrated-as -c t.c -g
/tmp/t-dcdec5.s: Assembler messages:
/tmp/t-dcdec5.s:8: Error: file number less than one
clang-7.0: error: assembler command failed with exit code 1 (use -v to see invocation)
llvm-svn: 328699
Craig Topper