This will allow external callers of these functions to switch over time
rather than forcing a breaking change all a once. These particular
functions were determined by building clang/lld/lldb.
llvm-svn: 202959
a bit surprising, as the class is almost entirely abstracted away from
any particular IR, however it encodes the comparsion predicates which
mutate ranges as ICmp predicate codes. This is reasonable as they're
used for both instructions and constants. Thus, it belongs in the IR
library with instructions and constants.
llvm-svn: 202838
Breaks the MSVC build.
DataStream.cpp(44): error C2552: 'llvm::Statistic::Value' : non-aggregates cannot be initialized with initializer list
llvm-svn: 202731
With C++11 we finally have a standardized way to specify atomic operations. Use
them to replace the existing custom implemention. Sadly the translation is not
entirely trivial as std::atomic allows more fine-grained control over the
atomicity. I tried to preserve the old semantics as well as possible.
Differential Revision: http://llvm-reviews.chandlerc.com/D2915
llvm-svn: 202730
lib/Support/RWMutex.cpp contains an implementation of RWMutex that
uses pthread_rwlock, but when pthread_rwlock is not available (such as
under NaCl, when using newlib), it silently falls back to using the
no-op definition in lib/Support/Unix/RWMutex.inc, which is not
thread-safe.
Fix this case to be thread-safe by using a normal mutex.
Differential Revision: http://llvm-reviews.chandlerc.com/D2892
llvm-svn: 202570
Tools that use the CommandLine library currently exit with an error
when invoked with -version or -help. This is unusual and non-standard,
so we'll fix them to exit successfully instead.
I don't expect that anyone relies on the current behaviour, so this
should be a fairly safe change.
llvm-svn: 202530
target_link_libraries(INTERFACE) doesn't bring inter-target dependencies in add_library,
although final targets have dependencies to whole dependent libraries.
It makes most libraries can be built in parallel.
target_link_libraries(PRIVATE) is used to shaared library.
Each dependent library is linked to the target.so, and its user will not see its grandchildren.
For example,
- libclang.so has sufficient libclang*.a(s).
- c-index-test requires just only libclang.so.
FIXME: lld is tweaked minimally. Adding INTERFACE in each library would be better thing.
llvm-svn: 202241
After this I will set the default back to F_None. The advantage is that
before this patch forgetting to set F_Binary would corrupt a file on windows.
Forgetting to set F_Text produces one that cannot be read in notepad, which
is a better failure mode :-)
llvm-svn: 202052
Before this patch they would take an boolean argument to say if the path
already existed. This was redundant with the returned error_code which is able
to represent that. This allowed for callers to incorrectly check only the
existed flag instead of first checking the error code.
Instead, pass in a boolean flag to say if the previous (non-)existence should be
an error or not.
Callers of the of the old simple versions are not affected. They still ignore
the previous (non-)existence as they did before.
llvm-svn: 201979
The LLVMSupport library implementation consolidates all dependencies on
system libraries. Move the logic gathering system libraries out of
'cmake/modules/LLVM-Config.cmake' and into 'lib/Support/CMakeLists.txt'.
Use the target_link_libraries() command there to tell CMake about the
link dependencies of the LLVMSupport implementation. CMake will
automatically propagate this to all targets that link LLVMSupport
directly or indirectly.
We still need to build knowledge of system library dependencies into
'llvm-config'. Store the list of libraries needed in a property on
LLVMSupport and teach 'tools/llvm-config/CMakeLists.txt' to retrieve it
from there.
Drop all calls to 'link_system_libs' and 'get_system_libs' from our
CMake code. Replace their implementations with a warning that explains
the calls are no longer necessary. Also drop from 'LLVMConfig.cmake'
the HAVE_* and related variables that were published there only to allow
'get_system_libs' to run outside our build process.
Contributed by Brad King.
llvm-svn: 201969
This is an optimistic version of create_diretories: it tries to create the
directory first and looks at the parent only if that fails.
Running strace on "mkdir -p" shows that it is pessimistic, calling mkdir on
every element of the path. We could implement that if needed.
In any case, with both strategies there is no reason to call stat, just check
the return of mkdir.
llvm-svn: 201347
I found that swapping the order of some header files helped fix a
build issue that we're seeing on mingw32. Without the swap, windows.h
was being included before _WIN32_WINNT was being defined and the
CreateHardLinkW function was #ifdef'd out.
It looks like the header is mainly used to get the SHGetFolderPathW
function, so I don't think that there'll be much fallout from the
switch.
Suggested by Alex Crichton. Thanks!
llvm-svn: 201230
An intermediate solution until the problems with analyzer plugins linking with
llvm/Support and causing assertions due to duplicate GeneralCategory are solved.
llvm-svn: 200981
Summary:
The check performed in the comparator is invalid, as some STL
implementations enforce strict weak ordering by calling the comparator with the
same value. This check was also in a wrong place: the assertion would only fire
when -help was used. The new check is performed each time the category is
registered (we are not going to have thousands of them, so it's fine to do it in
O(N^2)).
Reviewers: jordan_rose
Reviewed By: jordan_rose
CC: cfe-commits, alexmc
Differential Revision: http://llvm-reviews.chandlerc.com/D2699
llvm-svn: 200853
ISSUE:
On Ubuntu 12.04 LTS, arc4random is provided by libbsd.so, which is a
transitive dependency of libedit. If a system had libedit on it that
was implemented in terms of libbsd.so, then the arc4random test,
previously implemented as a linker test, would succeed with -ledit.
However, on Ubuntu this would also require a #include <bsd/stdlib.h>.
This caused a build breakage on configure-based Ubuntu 12.04 with
libedit installed.
FIX:
This fix changes configure to test for arc4random by searching for it
in the standard header files. On Ubuntu 12.04, this test now properly
fails to find arc4random as it is not defined in the default header
locations. It also tweaks the #define names to match the output of the
header check command, which is slightly different than the linker
function check #defines.
I tested the following scenarios:
(1) Ubuntu 12.04 without the libedit package [did not find arc4random,
as expected]
(2) Ubuntu 12.04 with libedit package [properly did not find
arc4random, as expected]
(3) Ubuntu 12.04 with most recent libedit, custom built, and not
dependent on libbsd.so [properly did not find arc4random, as
expected].
(4) FreeBSD 10.0B1 [properly found arc4random, as expected]
llvm-svn: 200819
'SmallPtrSetImplBase'. This more closely matches the organization of
SmallVector and should allow introducing a SmallPtrSetImpl which serves
the same purpose as SmallVectorImpl: isolating the element type from the
particular small size chosen. This in turn allows a lot of
simplification of APIs by not coding them against a specific small size
which is rarely needed.
llvm-svn: 200687
This will be used by the line editor library to derive a default path to
the history file.
Differential Revision: http://llvm-reviews.chandlerc.com/D2199
llvm-svn: 200594
This can still be overridden by explicitly setting a value requirement on the
alias option, but by default it should be the same.
PR18649
llvm-svn: 200407
The default value of this attribute is PTHREAD_PROCESS_PRIVATE, so
there's no point in calling pthread_mutexattr_setpshared() to set
that.
See: http://pubs.opengroup.org/onlinepubs/9699919799/functions/pthread_mutexattr_getpshared.html
This removes some ifdefs that tend to need to be extended for other
platforms (e.g. for NaCl).
Note that this call was in the first implementation of Mutex, added in
r22403, so it doesn't appear to have been added in response to a
performance problem.
Differential Revision: http://llvm-reviews.chandlerc.com/D2633
llvm-svn: 200360
There are a couple of interesting things here that we want to check over
(particularly the expecting asserts in StringRef) and get right for general use
in ADT so hold back on this one. For clang we have a workable templated
solution to use in the meanwhile.
This reverts commit r200187.
llvm-svn: 200194
(1) Add llvm_expect(), an asserting macro that can be evaluated as a constexpr
expression as well as a runtime assert or compiler hint in release builds. This
technique can be used to construct functions that are both unevaluated and
compiled depending on usage.
(2) Update StringRef using llvm_expect() to preserve runtime assertions while
extending the same checks to static asserts in C++11 builds that support the
feature.
(3) Introduce ConstStringRef, a strong subclass of StringRef that references
compile-time constant strings. It's convertible to, but not from, ordinary
StringRef and thus can be used to add compile-time safety to various interfaces
in LLVM and clang that only accept fixed inputs such as diagnostic format
strings that tend to get misused.
llvm-svn: 200187
ADDITIONAL_HEADERS is intended to add header files for IDEs as hint.
For example:
add_llvm_library(LLVMSupport
Host.cpp
ADDITIONAL_HEADERS
Unix/Host.inc
Windows/Host.inc
)
llvm-svn: 199639
This moves the ARM build attributes definitions and support routines into the
Support library. The support routines simply permit the conversion of the value
to and from a string representation.
The movement is prompted in order to permit access to the constants and string
representations from readobj in order to facilitate decoding of the attributes
section.
llvm-svn: 199575
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
llvm-svn: 198685
lib/Support/ThreadLocal.cpp:53:15: error: typedef 'SIZE_TOO_BIG' locally defined but not used [-Werror=unused-local-typedefs]
typedef int SIZE_TOO_BIG[sizeof(pthread_key_t) <= sizeof(data) ? 1 : -1];
Done the C++11 way, switching on and using LLVM_STATIC_ASSERT() instead of LLVM_ATTRIBUTE_UNUSED.
llvm-svn: 198255
This is an iterator which you can build around a MemoryBuffer. It will
iterate through the non-empty, non-comment lines of the buffer as
a forward iterator. It should be small and reasonably fast (although it
could be made much faster if anyone cares, I don't really...).
This will be used to more simply support the text-based sample
profile file format, and is largely based on the original patch by
Diego. I've re-worked the style of it and separated it from the work of
producing a MemoryBuffer from a file which both simplifies the interface
and makes it easier to test.
The style of the API follows the C++ standard naming conventions to fit
in better with iterators in general, much like the Path and FileSystem
interfaces follow standard-based naming conventions.
llvm-svn: 198068
According to the docs, ThreadLocal<>::get() should return NULL
if no object has been set. This patch makes that the case also for non-thread
builds and adds a very basic unit test to check it.
(This was causing PR18205 because PrettyStackTraceHead didn't get zero-
initialized and we'd crash trying to read past the end of that list. We didn't
notice this so much on Linux since we'd crash after printing all the entries,
but on Mac we print into a SmallString, and would crash before printing that.)
llvm-svn: 197718
The patch adds a new LLVMContext::diagnose that can be used to communicate to
the front-end, if any, that something of interest happened.
The diagnostics are supported by a new abstraction, the DiagnosticInfo class.
The base class contains the following information:
- The kind of the report: What this is about.
- The severity of the report: How bad this is.
This patch also adds 2 classes:
- DiagnosticInfoInlineAsm: For inline asm reporting. Basically, this diagnostic
will be used to switch to the new diagnostic API for LLVMContext::emitError.
- DiagnosticStackSize: For stack size reporting. Comes as a replacement of the
hard coded warning in PEI.
This patch also features dynamic diagnostic identifiers. In other words plugins
can use this infrastructure for their own diagnostics (for more details, see
getNextAvailablePluginDiagnosticKind).
This patch introduces a new DiagnosticHandlerTy and a new DiagnosticContext in
the LLVMContext that should be set by the front-end to be able to map these
diagnostics in its own system.
http://llvm-reviews.chandlerc.com/D2376
<rdar://problem/15515174>
llvm-svn: 197438
This was manifesting as an LLVM_ASSUME_ALIGNED() failure in an ELF debug
info test when building LLVM with clang in the Microsoft C++ ABI.
llvm-svn: 197401
The cpp backend is not a reasonable fallback for a missing target. It is a
very special backend, so it is reasonable to use it only if explicitly
requested.
While at it, simplify the interface a bit.
llvm-svn: 197241
The old AddFixedStringToRegEx() it was based on got away with this for the
longest time, but the problem became easy to spot after the cleanup in r197096.
Also add a quick unit test to cover regex escaping.
llvm-svn: 197121
Defaulting to iOS 3.0 when LLVM has to guess the version is no longer a useful
option and can give surprising results (like tail calls being disabled).
5.0 seems like a reasonable compromise as a platform that's still interesting
to some people.
rdar://problem/15567348
llvm-svn: 196912
Summary:
When clang is used under GNU/Linux in a chroot without /proc mount, it falls
back on the BSD method. However, since the buf variable is used twice
and fails with snprintf to produce the correct path.
When called as relatived (ie ./clang), it was failing with:
"" -cc1 [...] -x c++ x.cc
error: unable to execute command: Executable "" doesn't exist!
I also took the opportunity to simply the code (the first arg of test_dir
was useless).
Reviewers: rafael
Reviewed By: rafael
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2361
llvm-svn: 196791
Command line arguments that begin with @ but aren't a path to an
existing file currently cause later @file arguments to be ignored.
Correctly skip over these arguments instead of trying to read a
non-existent file 20 times and giving up.
Since the problem manifests in the clang driver, the test is in that
repository.
Fixes rdar://problem/15590906
llvm-svn: 196620
This fixes a logic bug pointed out by Juraj Ivancic.
No behavior change because none of the in-tree clients of
cl::ExpandResponseFiles check the return value. In this case, the
@prefixed arguments are left in the command line. Downstream command
line processing has the opportunity to emit errors about it, so this
isn't that bad.
llvm-svn: 196306
protection to the same layer.
This is in line with Howard's advice on how best to handle self-move
assignment as he explained on SO[1]. It also ensures that implementing
swap with move assignment continues to work in the case of self-swap.
[1]: http://stackoverflow.com/questions/9322174/move-assignment-operator-and-if-this-rhs
llvm-svn: 195705
Enhance the tests to actually require moves in C++11 mode, in addition
to testing the moved-from state. Further enhance the tests to cover
copy-assignment into a moved-from object and moving a large-state
object. (Note that we can't really test small-state vs. large-state as
that isn't an observable property of the API really.) This should finish
addressing review on r195239.
llvm-svn: 195261
Somehow, this ADT got missed which is moderately terrifying considering
the efficiency of move for it.
The code to implement move semantics for it is pretty horrible
currently but was written to reasonably closely match the rest of the
code. Unittests that cover both copying and moving (at a basic level)
added.
llvm-svn: 195239
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file. The memory leaks in this version have been fixed. Thanks
Alexey for pointing them out.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 195064
This change is incorrect. If you delete virtual destructor of both a base class
and a subclass, then the following code:
Base *foo = new Child();
delete foo;
will not cause the destructor for members of Child class. As a result, I observe
plently of memory leaks. Notable examples I investigated are:
ObjectBuffer and ObjectBufferStream, AttributeImpl and StringSAttributeImpl.
llvm-svn: 194997
This change is the first in a series of changes improving LLVM's Block
Frequency propogation implementation to not lose probability mass in
branchy code when propogating block frequency information from a basic
block to its successors. This patch is a simple infrastructure
improvement that does not actually modify the block frequency
algorithm. The specific changes are:
1. Changes the division algorithm used when scaling block frequencies by
branch probabilities to a short division algorithm. This gives us the
remainder for free as well as provides a nice speed boost. When I
benched the old routine and the new routine on a Sandy Bridge iMac with
disabled turbo mode performing 8192 iterations on an array of length
32768, I saw ~600% increase in speed in mean/median performance.
2. Exposes a scale method that returns a remainder. This is important so
we can ensure that when we scale a block frequency by some branch
probability BP = N/D, the remainder from the division by D can be
retrieved and propagated to other children to ensure no probability mass
is lost (more to come on this).
llvm-svn: 194950
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 194865
Summary:
Some machine-type-neutral object files containing only undefined symbols
actually do exist in the Windows standard library. Need to recognize them
as COFF files.
Reviewers: Bigcheese
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2164
llvm-svn: 194734
stack traces by default if you use PrettyStackTraceProgram, so that existing LLVM-based
tools will continue to get it without any changes.
llvm-svn: 193971
As on other hosts, the CPU identification instruction is priveleged,
so we need to look through /proc/cpuinfo. I copied the PowerPC way of
handling "generic".
Several tests were implicitly assuming z10 and so failed on z196.
llvm-svn: 193742
startswith_lower is ocassionally useful and I think worth adding.
endwith_lower is added for completeness.
Differential Revision: http://llvm-reviews.chandlerc.com/D2041
llvm-svn: 193706
gcc diagnoses this:
warning: converting to non-pointer type 'unsigned int' from NULL
Also remove an empty statement.
No change in functionality.
llvm-svn: 192955
I expose the API with some caveats:
- The C++ API involves a traditional void* opaque pointer for the fatal
error callback. The C API doesn’t do this. I don’t think that the void*
opaque pointer makes any sense since this is a global callback - there will
only be one of them. So if you need to pass some data to your callback,
just put it in a global variable.
- The bindings will ignore the gen_crash_diag boolean. I ignore it because
(1) I don’t know what it does, (2) it’s not documented AFAIK, and (3) I
couldn’t imagine any use for it. I made the gut call that it probably
wasn’t important enough to expose through the C API.
llvm-svn: 192864
Some background: One can pass compiled resource files (.res files) directly
to the linker on Windows. If a resource file is given, the linker will run
"cvtres" command in background to convert the resource file to a COFF file
to link it.
What I'm trying to do with this patch is to make the linker to recognize
the resource file by file magic, so that it can run cvtres command.
Differential Revision: http://llvm-reviews.chandlerc.com/D1943
llvm-svn: 192742
We were using an anti-pattern of:
- LoadLibrary
- GetProcAddress
- FreeLibrary
This is problematic because of several reasons:
- We are holding on to pointers into a library we just unloaded.
- Calling LoadLibrary results in an increase in the reference count of
the library in question and any libraries that it depends on and
so-on and so-forth. This is none too quick.
Instead, use GetModuleHandleEx with GET_MODULE_HANDLE_EX_FLAG_PIN. This
is done because because we didn't bring the reference for the library
into existence and therefor shouldn't count on it being around later.
llvm-svn: 192550
Patch by Vladimir Voskresensky. The erros were:
Path.inc:274:3: error: ‘Dl_info’ was not declared in this scope
...
and
usr/include/spawn.h:52:14: error: expected ‘,’ or ‘...’ before ‘argv’
llvm-svn: 192185
This addresses several issues in a similar vein:
- Use the Unicode APIs when possible, running nm on clang shows that we
only use Unicode APIs except for FormatMessage, CreateSemaphore, and
GetModuleHandle. AFAICT, the latter two are coming from MinGW and
not LLVM itself.
- Make getMainExecutable more resilient. It previously considered
return values of zero from ::GetModuleFileNameA to be acceptable.
llvm-svn: 192096
Summary:
The MSVCRT deliberately sends main() code-page specific characters.
This isn't too useful to LLVM as we end up converting the arguments to
UTF-16 and subsequently attempt to use the result as, for example, a
file name. Instead, we need to have the ability to access the Unicode
command line and transform it to UTF-8.
This has the distinct advantage over using the MSVC-specific wmain()
function as our entry point because:
- It doesn't work on cygwin.
- It only work on MinGW with caveats and only then on certain versions.
- We get to keep our entry point as main(). :)
N.B. This patch includes fixes to other parts of lib/Support/Windows
s.t. we would be able to take advantage of getting the Unicode paths.
E.G. clang spawning clang -cc1 would want to give it Unicode arguments.
Reviewers: aaron.ballman, Bigcheese, rnk, ruiu
Reviewed By: rnk
CC: llvm-commits, ygao
Differential Revision: http://llvm-reviews.chandlerc.com/D1834
llvm-svn: 192069
- New ProcessInfo class to encapsulate information about child processes.
- Generalized the Wait() to support non-blocking wait on child processes.
- ExecuteNoWait() now returns a ProcessInfo object with information about
the launched child. Users will be able to use this object to
perform non-blocking wait.
- ExecuteNoWait() now accepts an ExecutionFailed param that tells if execution
failed or not.
These changes will allow users to implement basic process parallel
tools.
Differential Revision: http://llvm-reviews.chandlerc.com/D1728
llvm-svn: 191763
This makes using array_pod_sort significantly safer. The implementation relies
on function pointer casting but that should be safe as we're dealing with void*
here.
llvm-svn: 191175
Based on code review feedback from Eric Christopher, unshifting these
constants as they can appear in the gdb_index itself, shifted a further
24 bits. This means that keeping them preshifted is a bit inflexible, so
let's not do that.
Given the motivation, wrap up some nicer enums, more type safety, and
some utility functions.
llvm-svn: 191035
advertised - but it does have the caveat that calls to DynamicLibrary::AddSymbol will
"reset" if you shutdown llvm and try to come back for seconds. This is a subtle
behavior change, but I'm assuming that nobody is affected by it.
llvm-svn: 190946
advertised - but it does have the caveat that calls to DynamicLibrary::AddSymbol will
"reset" if you shutdown llvm and try to come back for seconds. This is a subtle
behavior change, but I'm assuming that nobody is affected by it.
llvm-svn: 190921
This was somewhat tricky because ~PrettyStackTraceEntry() may run after
llvm_shutdown() has been called. This is rare and only happens for a common idiom
used in the main() functions of command-line tools. This works around the idiom by
skipping the stack clean-up if the PrettyStackTraceHead ManagedStatic is not
constructed (i.e. llvm_shutdown() has been called).
llvm-svn: 190730
Implements Instruction scheduler latencies for Silvermont,
using latencies from the Intel Silvermont Optimization Guide.
Auto detects SLM.
Turns on post RA scheduler when generating code for SLM.
llvm-svn: 190717
global ThreadLocals, thereby getting rid of the load-time initialization of those
objects and also getting rid of their destruction unless the LLVM client calls
llvm_shutdown.
llvm-svn: 190617
This reflects the common use case of nativizing a prepared path. The existing
version invokes undefined behavior if input = output, add an assert to catch
that case.
llvm-svn: 190510
YAMLIO printed a string as is without quotes unless it contains a newline
character. That did not suffice. We also need to quote a string if it starts
with a backquote, quote, double quote or atsign, or it's the empty string.
llvm-svn: 190469
In some cases (e.g. when a build system pipes stderr) the Windows console
API cannot be used to color output. For these, provide a way to switch to
ANSI escape codes. This is required for Clang's -fansi-escape-codes option.
llvm-svn: 190460
On Windows, character encoding of multibyte environment variable varies
depending on settings. The only reliable way to handle it I think is to use
GetEnvironmentVariableW().
GetEnvironmentVariableW() works on wchar_t string, which is on Windows UTF16
string. That's not ideal because we use UTF-8 as the internal encoding in LLVM.
This patch defines a wrapper function which takes and returns UTF-8 string for
GetEnvironmentVariableW().
The wrapper function does not do any conversion and just forwards the argument
to getenv() on Unix.
Differential Revision: http://llvm-reviews.chandlerc.com/D1612
llvm-svn: 190423
Summary:
This is needed so we can use generic columnWidthUTF8 in clang-format on
win32 simultaneously with a separate system-dependent implementations of
isPrint/columnWidth in TextDiagnostic.cpp to avoid attempts to print Unicode
characters using narrow-character interfaces (which is not supported on Windows,
and we'll have to figure out how to handle this).
Reviewers: jordan_rose
Reviewed By: jordan_rose
CC: llvm-commits, klimek
Differential Revision: http://llvm-reviews.chandlerc.com/D1559
llvm-svn: 189952
For example, r189780's SparcISelLowering.cpp has the size 98304. It crashed clang to touch a null terminator on cygwin.
FIXME: It's not good to hardcode 4096 here. dwPageSize shows 4096.
llvm-svn: 189939
printing routine. This is made harder to see due to the surprising
formatting, inconsistent brace usage, and repeated conditions that all
test the same thing.
The only "consequence" of this bug is re-assigning 'str' to an empty
string when computing the error string for an error number of 0 in the
event of a non-GNU strerror_r routine. So, nothing to see here other
than cleanup. It did help me find PR17055 in clang-format though.
llvm-svn: 189734
- We do some nasty things w.r.t. installing or overriding signal handlers in
order to improve our crash recovery support or interaction with crash
reporting software, and those things are not necessarily appropriate when
LLVM is being linked into a client application that has its own ideas about
how to do things. This gives those clients a way to disable that handling at
build time.
- Currently, the code this guards is all Apple specific, but other platforms
might have the same concerns so I went for a more generic configure
name. Someone who is more familiar with library embedding on Windows can
handle choosing which of the Windows/Signals.inc behaviors might make sense
to go under this flag.
- This also fixes the proper autoconf'ing of ENABLE_BACKTRACES. The code
expects it to be undefined when disabled, but the autoconf check was just
defining it to 0.
llvm-svn: 189694
This is a re-commit of r189442; I'll follow up with clang changes.
The previous default was almost, but not quite enough digits to
represent a floating-point value in a manner which preserves the
representation when it's read back in. The larger default is much
less confusing.
I spent some time looking into printing exactly the right number of
digits if a precision isn't specified, but it's kind of complicated,
and I'm not really sure I understand what APFloat::toString is supposed
to output for FormatPrecision != 0 (or maybe the current API specification
is just silly, not sure which). I have a WIP patch if anyone is interested.
llvm-svn: 189624
Summary:
Made UnicodeCharSet a class, perform validity checking inside its
constructor instead of each isCharInSet call, use std::binary_search instead of
own implementation.
This patch comes with a necessary change in clang (sent separately).
Reviewers: jordan_rose, klimek
Reviewed By: klimek
CC: cfe-commits, rsmith
Differential Revision: http://llvm-reviews.chandlerc.com/D1534
llvm-svn: 189582
The previous default was almost, but not quite enough digits to
represent a floating-point value in a manner which preserves the
representation when it's read back in. The larger default is much
less confusing.
I spent some time looking into printing exactly the right number of
digits if a precision isn't specified, but it's kind of complicated,
and I'm not really sure I understand what APFloat::toString is supposed
to output for FormatPrecision != 0 (or maybe the current API specification
is just silly, not sure which). I have a WIP patch if anyone is interested.
llvm-svn: 189442
The problem with having DefaultSlabAllocator being a global static is that it is undefined if BumpPtrAllocator
will be usable during global initialization because it is not guaranteed that DefaultSlabAllocator will be
initialized before BumpPtrAllocator is created and used.
llvm-svn: 189433
Offset in mmap(3) should be aligned to gepagesize(), 64k, or mmap(3) would fail.
TODO: Invetigate places where 4096 would be required as pagesize, or 4096 would satisfy.
llvm-svn: 188903
allocated by setupterm. Without this, some folks are seeing leaked
memory whenever this routine is called more than once. Thanks to Craig
Topper for the report.
llvm-svn: 188615
curses.h). Finding these headers is next to impossible. For example, on
Debian systems libtinfo-dev provides the terminfo reading library we
want, but *not* term.h. For the header, you have to use libncurses-dev.
And libncursesw-dev provides a *different* term.h in a different
location!
These headers aren't worth it. We want two functions the signatures of
which are clearly spec'ed in sys-v and other documentation. Just declare
them ourselves and call them. This should fix some debian builders and
provide better support for "minimal" debian systems that do want color
autodetection.
llvm-svn: 188165
library for color support detection. This still will use a curses
library if that is all we have available on the system. This change
tries to use a smaller subset of the curses library, specifically the
subset that is on some systems split off into a separate library. For
example, if you install ncurses configured --with-tinfo, a 'libtinfo' is
install that provides just the terminfo querying functionality. That
library is now used instead of curses when it is available.
This happens to fix a build error on systems with that library because
when we tried to link ncurses into the binary, we didn't pull tinfo in
as well. =]
It should also provide an easy path for supporting the NetBSD
libterminfo library, but as I don't have access to a NetBSD system I'm
leaving adding that support to those folks.
llvm-svn: 188160
Summary:
This is consistent with MacOSX implementation, and most terminals
actually display this character (checked on gnome-terminal, lxterminal, lxterm,
Terminal.app, iterm2). Actually, this is in line with the ISO Latin 1 standard
(ISO 8859-1), which defines it differently from the Unicode Standard. More
information here: http://www.cs.tut.fi/~jkorpela/shy.html
Reviewers: gribozavr, jordan_rose
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1310
llvm-svn: 187949
This allows llvm-tblgen to link successfully when compiling with clang.
Both MSBuild and CMake will automatically add advapi32 as part of a set
of other dlls comprising the win32 API to the link line, but CMake
doesn't do that when compiling with clang. Until someone adds that info
to cmake upstream, this seems like a reasonable work around.
llvm-svn: 187907
using it to detect whether or not a terminal supports colors. This
replaces a particularly egregious hack that merely compared the TERM
environment variable to "dumb". That doesn't really translate to
a reasonable experience for users that have actually ensured their
terminal's capabilities are accurately reflected.
This makes testing a terminal for color support somewhat more expensive,
but it is called very rarely anyways. The important fast path when the
output is being piped somewhere is already in place.
The global lock may seem excessive, but the spec for calling into curses
is *terrible*. The whole library is terrible, and I spent quite a bit of
time looking for a better way of doing this before convincing myself
that this was the fundamentally correct way to behave. The damage of the
curses library is very narrowly confined, and we continue to use raw
escape codes for actually manipulating the colors which is a much sane
system than directly using curses here (IMO).
If this causes trouble for folks, please let me know. I've tested it on
Linux and will watch the bots carefully. I've also worked to account for
the variances of curses interfaces that I could finde documentation for,
but that may not have been sufficient.
llvm-svn: 187874
for StringRef with a StringMap
The bug is that the empty key compares equal to the tombstone key.
Also added an assertion to DenseMap to catch similar bugs in future.
llvm-svn: 187866
One use needs to copy the alloca into a std::string, and the other use
is before calling CreateProcess, which is very heavyweight anyway.
llvm-svn: 187845
Summary:
This is a second attempt to get this right. After reading the Unicode
Standard I came up with the code that uses definitions of "printable" and
"column width" more suitable for terminal output (i.e. fixed-width fonts and
special treatment of many control characters).
The implementation here can probably be used for Windows and MacOS if someone
can test it properly.
The patch addresses PR14910.
Reviewers: jordan_rose, gribozavr
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1253
llvm-svn: 187837
LLVM's coding standards recommend raw_ostream and MemoryBuffer for
reading and writing text.
This has the side effect of allowing clang to compile more of Support
and TableGen in the Microsoft C++ ABI.
llvm-svn: 187826
This will be used to implement an optimisation for literal entries
in special case lists.
Differential Revision: http://llvm-reviews.chandlerc.com/D1278
llvm-svn: 187731
The unix one was returning no_such_file_or_directory, but the windows one
was return success.
Update the one one caller that was depending on the old behavior.
llvm-svn: 187463
IEEE-754R 1.4 Exclusions states that IEEE-754R does not specify the
interpretation of the sign of NaNs. In order to remove an irrelevant
variable that most floating point implementations do not use,
standardize add, sub, mul, div, mod so that operating anything with
NaN always yields a positive NaN.
In a later commit I am going to update the APIs for creating NaNs so
that one can not even create a negative NaN.
llvm-svn: 187314
Zeroing the significand of a floating point number does not necessarily cause a
floating point number to become finite non zero. For instance, if one has a NaN,
zeroing the significand will cause it to become +/- infinity.
llvm-svn: 187313
Both GCC and LLVM will implicitly define __ppc__ and __powerpc__ for
all PowerPC targets, whether 32- or 64-bit. They will both implicitly
define __ppc64__ and __powerpc64__ for 64-bit PowerPC targets, and not
for 32-bit targets. We cannot be sure that all other possible
compilers used to compile Clang/LLVM define both __ppc__ and
__powerpc__, for example, so it is best to check for both when relying
on either inside the Clang/LLVM code base.
This patch makes sure we always check for both variants. In addition,
it fixes one unnecessary check in lib/Target/PowerPC/PPCJITInfo.cpp.
(At least one of __ppc__ and __powerpc__ should always be defined when
compiling for a PowerPC target, no matter which compiler is used, so
testing for them is unnecessary.)
There are some places in the compiler that check for other variants,
like __POWERPC__ and _POWER, and I have left those in place. There is
no need to add them elsewhere. This seems to be in Apple-specific
code, and I won't take a chance on breaking it.
There is no intended change in behavior; thus, no test cases are
added.
llvm-svn: 187248
On Windows, this improves clean cmake configuration time on my
workstation from 1m58s to 1m32s, which is pretty significant. There's
probably more that can be done here, but this is the low hanging fruit.
Eric volunteered to regenerate ./configure for me.
llvm-svn: 187209
* Remove LLVM_ENABLE_CRT_REPORT. LLVM_DISABLE_CRASH_REPORT made it redundant.
* set Return to 1, so that we get a stack trace on failure.
* don't call _exit, so that we get a negative exit value and "not --crash"
correctly differentiates crashes and regular errors.
This is a bit experimental since the documentation on this interface is sparse.
It doesn't bring up a dialog on my windows setup, but feel free to revert
if it causes problem for your setup (and let me know what it is so that I
can try to fix this patch).
llvm-svn: 187206
This patch provides basic support for powerpc64le as an LLVM target.
However, use of this target will not actually generate little-endian
code. Instead, use of the target will cause the correct little-endian
built-in defines to be generated, so that code that tests for
__LITTLE_ENDIAN__, for example, will be correctly parsed for
syntax-only testing. Code generation will otherwise be the same as
powerpc64 (big-endian), for now.
The patch leaves open the possibility of creating a little-endian
PowerPC64 back end, but there is no immediate intent to create such a
thing.
The LLVM portions of this patch simply add ppc64le coverage everywhere
that ppc64 coverage currently exists. There is nothing of any import
worth testing until such time as little-endian code generation is
implemented. In the corresponding Clang patch, there is a new test
case variant to ensure that correct built-in defines for little-endian
code are generated.
llvm-svn: 187179
Before this patch we would strdup each argument. If one was a response file,
we would replace it with the response file contents, leaking the original
strdup result.
We now don't strdup the originals and let StringSaver free any memory it
allocated. This also saves a bit of malloc traffic when response files are
not used.
Leak found by the valgrind build bot.
llvm-svn: 187042
The main observation is that we never need both the filesize and the map size.
When mapping a slice of a file, it doesn't make sense to request a null
terminator and that would be the only case where the filesize would be used.
There are other cleanups that should be done in this area:
* A client should not have to pass the size (even an explicit -1) to say if
it wants a null terminator or not, so we should probably swap the argument
order.
* The default should be to not require a null terminator. Very few clients
require this, but many end up asking for it just because it is the default.
llvm-svn: 186984
* assert that the return value is one of the documented values on msdn.
* on FILE_TYPE_UNKNOWN, check GetLastError.
Unfortunately I can't think of a way to get a FILE_TYPE_UNKNOWN on a test.
llvm-svn: 186595
The plan is to use it for clang and lld.
Major behavior changes:
- We can now parse UTF-16 files that have a byte order mark.
- PR16209: Don't drop backslashes on the floor if they don't escape
anything.
The actual parsing loop was based on code from Clang's driver.cpp,
although it's been rewritten to track its state with control flow rather
than state variables.
Reviewers: hans
Differential Revision: http://llvm-reviews.chandlerc.com/D1170
llvm-svn: 186587
Ahmed Charles