This emits a remark when LoopDeletion deletes a dead loop, using the
source location of the loop's header. There are currently two reasons
for removing the loop: invariant loop or loop that never executes.
Differential Revision: https://reviews.llvm.org/D83113
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
The actual type of the first argument of the @dbg intrinsic
doesn't really matter as we're setting it to `undef`, but the
bitcode reader is picky about `void` types.
llvm-svn: 349069
When loops are deleted, we don't keep track of variables modified inside
the loops, so the DI will contain the wrong value for these.
e.g.
int b() {
int i;
for (i = 0; i < 2; i++)
;
patatino();
return a;
-> 6 patatino();
7 return a;
8 }
9 int main() { b(); }
(lldb) frame var i
(int) i = 0
We mark instead these values as unavailable inserting a
@llvm.dbg.value(undef to make sure we don't end up printing an incorrect
value in the debugger. We could consider doing something fancier,
for, e.g. constants, in the future.
PR39868.
rdar://problem/46418795)
Differential Revision: https://reviews.llvm.org/D55299
llvm-svn: 348988
This is a fix for PR35884.
When we want to delete dead loop we must clean uses in unreachable blocks
otherwise we'll get an assert during deletion of instructions from the loop.
Reviewers: anna, davide
Reviewed By: anna
Subscribers: llvm-commits, lebedev.ri
Differential Revision: https://reviews.llvm.org/D41943
llvm-svn: 322357
Summary:
This patch makes LoopDeletion use the incremental DominatorTree API.
We modify LoopDeletion to perform the deletion in 5 steps:
1. Create a new dummy edge from the preheader to the exit, by adding a conditional branch.
2. Inform the DomTree about the new edge.
3. Remove the conditional branch and replace it with an unconditional edge to the exit. This removes the edge to the loop header, making it unreachable.
4. Inform the DomTree about the deleted edge.
5. Remove the unreachable block from the function.
Creating the dummy conditional branch is necessary to perform incremental DomTree update.
We should consider using the batch updater when it's ready.
Reviewers: dberlin, davide, grosser, sanjoy
Reviewed By: dberlin, grosser
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D35391
llvm-svn: 309850
Summary:
Currently, we incorrectly update exit blocks of loops when there are multiple
edges from a single exiting block to the exit block. This can happen when we
have switches as the terminator of the exiting blocks.
The fix here is to correctly update the phi nodes in the exit block, and remove
all incoming values *except* for one which is from the preheader.
Note: Currently, this error can manifest only while deleting non-executed loops. However, it
is possible to trigger this error in invariant loops, once we enhance the logic
around the exit conditions for the loop check.
Reviewers: chandlerc, dberlin, sanjoy, efriedma
Reviewed by: efriedma
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D34516
llvm-svn: 306048
Summary:
Currently, loop deletion deletes loop where the only values
that are used outside the loop are loop-invariant.
This patch adds logic to delete loops where the loop is proven to be
never executed (i.e. the only predecessor of the loop preheader has a
constant conditional branch as terminator, and the preheader is not the
taken target). This will remove loops that become dead after
loop-unswitching generates constant conditional branches.
The next steps are:
1. moving the loop deletion implementation to LoopUtils.
2. Add logic in loop-simplifyCFG which will support changing conditional
constant branches to unconditional branches. If loops become unreachable in this
process, they can be removed using `deleteDeadLoop` function.
Reviewers: chandlerc, efriedma, sanjoy, reames
Reviewed by: sanjoy
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32494
llvm-svn: 302015
claims to test.
LoopSimplify was unifying the multiple exits in this test case, making
it never even test the multiple exit handling of LoopDeletion. Doh.
Now it works (thanks to a great idea from mkuper) and will fail if we
ever change something to make it stop working.
llvm-svn: 292331
Summary: Port Dead Loop Deletion Pass to the new pass manager.
Reviewers: silvas, davide
Subscribers: llvm-commits, sanjoy, mcrosier
Differential Revision: https://reviews.llvm.org/D21483
llvm-svn: 275453
`Loop::makeLoopInvariant` can hoist instructions out of loops, so loop
dispositions for the loop it operated on may need to be cleared. We can
be smarter here (especially around how `forgetLoopDispositions` is
implemented), but let's be correct first.
Fixes PR27570.
llvm-svn: 268406
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
llvm-svn: 188513
which branch on undef to branch on a boolean constant for the edge
exiting the loop. This helps ScalarEvolution compute trip counts for
loops.
Teach ScalarEvolution to recognize single-value PHIs, when safe, and
ForgetSymbolicName to forget such single-value PHI nodes as apprpriate
in ForgetSymbolicName.
llvm-svn: 97126
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.
llvm-svn: 81537
Francis Visoiu Mistrih