The lxv/stxv instructions require an offset that is 0 % 16. Previously we were
selecting lxv/stxv for loads and stores to the stack where the offset from the
slot was a multiple of 16, but the stack slot was not 16 or more byte aligned.
When the frame gets lowered these transform to r(1|31) + slot + offset.
If slot is not aligned, slot + offset may not be 0 % 16.
Now we require 16 byte or more alignment for select lxv/stxv to stack slots.
Includes a testcase that shows both sufficiently and insufficiently aligned
stack slots.
llvm-svn: 312843
Treat typedef enum as named enums instead of anonymous enums. Anonymous enums
are ignored by the warning, so previously, typedef enums were ignored as well.
llvm-svn: 312842
A clang change caused the inclusion of `llvm::Type` and
`lldb_private::Type` to be pulled into the global namespace due to the
`using namespace llvm;` and `using namespace lldb_private;`. Explicitly
qualify the `Type` to resolve the ambiguity. NFC
llvm-svn: 312841
v2: add vload(half) as well
make helpers amdgpu specific (NVPTX uses different private AS numbering)
use clang builtin on clang >= 6
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <tstellar@redhat.com>
llvm-svn: 312839
Add missing undefs
Make helpers amdgpu specific (NVPTX uses different numbering for private AS)
Use clang builtins on clang >= 6
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <tstellar@redhat.com>
llvm-svn: 312838
Just add the SOURCE_X.Y list to the list of sources if X.Y is the current llvm version.
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <tstellar@redhat.com>
llvm-svn: 312837
When performing a NSFastEnumeration, the compiler synthesizes a call to
`countByEnumeratingWithState:objects:count:` where the `count` parameter
is of type `NSUInteger` and the return type is a `NSUInteger`. We would
previously always use a `UnsignedLongTy` for the `NSUInteger` type. On
32-bit targets, `long` is 32-bits which is the same as `unsigned int`.
Most 64-bit targets are LP64, where `long` is 64-bits. However, on
LLP64 targets, such as Windows, `long` is 32-bits. Introduce new
`getNSUIntegerType` and `getNSIntegerType` helpers to allow us to
determine the correct type for the `NSUInteger` type. Wire those
through into the generation of the message dispatch to the selector.
llvm-svn: 312835
In function TargetTransformInfo::getInstructionCost, all enum values in the switch statement has been covered, so the default is unnecessary, and may cause error with option -Werror,-Wcovered-switch-default, so remove it.
llvm-svn: 312834
Fixed an issue in printImm64Operand where if the value is
an expression, print out the expression properly. Currently,
it will print
r1 = <MCOperand Expr:(tx_port)>ll
With the patch, the printout will be
r1 = tx_port
Suggested-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 312833
Current TargetTransformInfo can support throughput cost model and code size model, but sometimes we also need instruction latency cost model in different optimizations. Hal suggested we need a single public interface to query the different cost of an instruction. So I proposed following interface:
enum TargetCostKind {
TCK_RecipThroughput, ///< Reciprocal throughput.
TCK_Latency, ///< The latency of instruction.
TCK_CodeSize ///< Instruction code size.
};
int getInstructionCost(const Instruction *I, enum TargetCostKind kind) const;
All clients should mainly use this function to query the cost of an instruction, parameter <kind> specifies the desired cost model.
This patch also provides a simple default implementation of getInstructionLatency.
The default getInstructionLatency provides latency numbers for only small number of instruction classes, those latency numbers are only reasonable for modern OOO processors. It can be extended in following ways:
Add more detail into this function.
Add getXXXLatency function and call it from here.
Implement target specific getInstructionLatency function.
Differential Revision: https://reviews.llvm.org/D37170
llvm-svn: 312832
The default host target for builtins and runtimes has special behavior
on some platforms, e.g. on Linux both i386 and x86_64 targets are being
built. Specifying "default" as a target name should lead to the same
behavior, which wasn't the case in the past. This patch unifies the
configuration between the non-target and "default" target to produce the
same behavior by moving the default configuration into a function that
can be used from both paths.
Differential Revision: https://reviews.llvm.org/D37450
llvm-svn: 312831
This is to fix PR34347. EmitAtomicExpr now only uses alignment information from
Type, instead of Decl, so when the declaration of an atomic variable is marked
to have the alignment equal as its size, EmitAtomicExpr doesn't know about it and
will generate libcall instead of atomic op. The patch uses EmitPointerWithAlignment
to get the precise alignment information.
Differential Revision: https://reviews.llvm.org/D37310
llvm-svn: 312830
This doesn't fix the failing test. Leave in the comment and the
attribute, since the used attribute is still required.
This partially reverts commit r312824
llvm-svn: 312827
On a Windows bot, I see a FileCheck error where the source being matched
over no longer exists, i.e it seems like it's FileCheck'ing some stale
output:
http://lab.llvm.org:8011/builders/llvm-clang-x86_64-expensive-checks-win/builds/4747
You can see "// CHECK: [[@LINE]]|{{ +}Marker at 19:3 = 1" in the
FileCheck stderr, but that CHECK line doesn't exist.
Remove the input file to FileCheck before running the test, to try and
appease the bot.
llvm-svn: 312825
Summary:
-dead_strip in ld64 strips weak interface symbols, which I believe
is most likely the cause of this test failure. Re-enable after marking the interface
function as used.
Reviewers: alekseyshl, kubamracek, kcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37635
llvm-svn: 312824
We have a lot of operand definition work essentially producing
every valid permutation of operands to workaround builiding
operand lists based on the instruction features. Apparently tablegen
already has a mostly undocumented operator to concat dags which
simplies this.
Convert one simple place to use this. The BUF instruction definitions
have much more complicated logic that can be totally rewritten now.
llvm-svn: 312822
The various scalar bit operations set SCC,
so one is erased or moved it needs to be recomputed.
Not sure why the existing tests don't fail on this.
llvm-svn: 312819
The current coverage implementation doesn't handle region termination
very precisely. Take for example an `if' statement with a `return':
void f() {
if (true) {
return; // The `if' body's region is terminated here.
}
// This line gets the same coverage as the `if' condition.
}
If the function `f' is called, the line containing the comment will be
marked as having executed once, which is not correct.
The solution here is to create a deferred region after terminating a
region. The deferred region is completed once the start location of the
next statement is known, and is then pushed onto the region stack.
In the cases where it's not possible to complete a deferred region, it
can safely be dropped.
Testing: lit test updates, a stage2 coverage-enabled build of clang
This is a reapplication but there are no changes from the original commit.
With D36813, the segment builder in llvm will be able to handle deferred
regions correctly.
llvm-svn: 312818
A coverage segment contains a starting line and column, an execution
count, and some other metadata. Clients of the coverage library use
segments to prepare line-oriented reports.
Users of the coverage library depend on segments being unique and sorted
in source order. Currently this is not guaranteed (this is why the clang
change which introduced deferred regions was reverted).
This commit documents the "unique and sorted" condition and asserts that
it holds. It also fixes the SegmentBuilder so that it produces correct
output in some edge cases.
Testing: I've added unit tests for some edge cases. I've also checked
that the new SegmentBuilder implementation is fully covered. Apart from
running check-profile and the llvm-cov tests, I've successfully used a
stage1 llvm-cov to prepare a coverage report for an instrumented clang
binary.
Differential Revision: https://reviews.llvm.org/D36813
llvm-svn: 312817
Each source region has a start and end location. Report an error when
the end location does not precede the begin location.
The old lineExecutionCounts.covmapping test actually had a buggy source
region in it. This commit introduces a regenerated copy of the coverage
and moves the old copy to malformedRegions.covmapping, for a test.
Differential Revision: https://reviews.llvm.org/D37387
llvm-svn: 312814
Make sure that the text and html emitters always emit the same set of
region markers, and avoid emitting redundant markers for line segments
which don't end on the line they start on.
This is related to D35925, and depends on D36014
Differential Revision: https://reviews.llvm.org/D36020
llvm-svn: 312813
This allows combining --dynamic-list and version scripts too. The
version script controls which symbols are visible, and
--dynamic-list controls which of those are preemptible.
Unlike previous versions, undefined symbols are still considered
preemptible, which was the issue breaking the cfi tests.
This fixes pr34053.
llvm-svn: 312806
This is to fix PR34347. EmitAtomicExpr now only uses alignment information from
Type, instead of Decl, so when the declaration of an atomic variable is marked
to have the alignment equal as its size, EmitAtomicExpr doesn't know about it and
will generate libcall instead of atomic op. The patch uses EmitPointerWithAlignment
to get the precise alignment information.
Differential Revision: https://reviews.llvm.org/D37310
llvm-svn: 312801
rL312641 Allowed llvm.memcpy/memset/memmove to be tail calls when parent
function return the intrinsics's first argument. However on arm-none-eabi
platform, llvm.memcpy will be expanded to __aeabi_memcpy which doesn't
have return value. The fix is to check the libcall name after expansion
to match "memcpy/memset/memmove" before allowing those intrinsic to be
tail calls.
llvm-svn: 312799
to separate commons based on file name patterns. The following linker script
construct does not work because commons are allocated before section placement
is done and the only synthesized BssSection that holds all commons has no file
associated with it:
SECTIONS { .common_0 : { *file0.o(COMMON) }}
This patch changes the allocation of commons to create a section per common
symbol and let the section logic do the layout.
Differential revision: https://reviews.llvm.org/D37489
llvm-svn: 312796
This is a recommit of r312781; in some build configurations
variable names are omitted, so changed the new regression
test accordingly.
llvm-svn: 312794
Matthias Braun