We were implicitly creating space for the headers. That is not the
behaviour of bfd, which requires the script to use SIZEOF_HEADERS. The
difference is important for scripts that don't use SIZEOF_HEADERS and
expect the first section to be at 0.
llvm-svn: 282818
If there is not sufficient address space, just give up and don't put
the header in the PT_LOAD.
This matches bfd behaviour and I found at least one script that
depends on having a section at address 0.
llvm-svn: 282750
The BYTE, SHORT, LONG, and QUAD commands store one, two, four, and eight bytes (respectively).
After storing the bytes, the location counter is incremented by the number of bytes
stored.
Previously our scripts handles these commands incorrectly. For example:
SECTIONS {
.foo : {
*(.foo.1)
BYTE(0x11)
...
We accepted the script above treating BYTE as input section description.
These commands are used in the wild though.
Differential revision: https://reviews.llvm.org/D24830
llvm-svn: 282429
We were counting the size of the bss section holding common symbols twice:
Dot += CurOutSec->getSize();
flush();
The new code is also simpler as now flush is the only function that
inserts in AlreadyOutputOS, which makes sense since the set hold fully
output sections.
llvm-svn: 282285
Previously we failed to parse next scripts because disallowed
a space between filler value and '=':
.text : {
...
} :text = 0x9090
Differential revision: https://reviews.llvm.org/D24831
llvm-svn: 282248
DEFINED(symbol)
Return 1 if symbol is in the linker global symbol table and is defined before
the statement using DEFINED in the script, otherwise return 0.
Can be used to define default values for symbols. Found it in the wild.
Differential revision: https://reviews.llvm.org/D24858
llvm-svn: 282245
Found this operators used in the wild scripts, for example:
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
Differential revision: https://reviews.llvm.org/D24860
llvm-svn: 282243
With the recent changes there should always be a 1:1 correspondence in
the correct order between OutputSections and OutputSectionCommands.
llvm-svn: 282176
The actual logic is to keep the output section if the output section
would have been ro/rw.
This is both simpler and more practical, as the intention is linker
scripts is to always keep of of a pair of ONLY_IF_RO/ONLY_IF_RW.
llvm-svn: 282099
This is PR30442.
Previously we were failed to parce complex expressions like:
foo : { *(SORT_BY_NAME(bar) zed) }
Main idea of patch that globs and excludes can be wrapped in a SORT.
There is a difference in semanics of ld/gold:
ld likes:
*(SORT(EXCLUDE_FILE (*file1.o) .foo.1))
gold likes:
*(EXCLUDE_FILE (*file1.o) SORT(.foo.1))
Patch implements ld grammar, complex expressions like
next is not a problem anymore:
.abc : { *(SORT(.foo.* EXCLUDE_FILE (*file1.o) .bar.*) .bar.*) }
Differential revision: https://reviews.llvm.org/D24758
llvm-svn: 282078
When final image has several .bss sections, lld fails
because second .bss always has zero VA. This causes
link error "Not enough space for ELF and program headers"
llvm-svn: 282067
It is not only a bit more straightforward now, but also next 2 issues are solved:
* It just crashed on ".foo : { *(EXCLUDE_FILE (*file1.o)) }" before.
* It accepted multiple EXCLUDE_FILEs in a row.
Differential revision: https://reviews.llvm.org/D24726
llvm-svn: 282060
This reverts commit r282021, bringing back r282015.
The problem was that the comparison function was not a strict weak
ordering anymore, which this patch fixes.
Original message:
Only restrict order if both sections are in the script.
This matches gold and bfd behavior and is required to handle some scripts.
The script has to assume where PT_LOADs start in order to align that
spot. If we don't allow section it doesn't know about to move to the
middle, we can need more PT_LOADs and those will not be aligned.
llvm-svn: 282035
This matches gold and bfd behavior and is required to handle some scripts.
The script has to assume where PT_LOADs start in order to align that
spot. If we don't allow section it doesn't know about to move to the
middle, we can need more PT_LOADs and those will not be aligned.
llvm-svn: 282015
Will Dietz found and reported that lld does not compile with gcc 6.2.0,
more details https://llvm.org/bugs/show_bug.cgi?id=30438
And confirmed this change fixes the issue.
llvm-svn: 281900
Our implementation supported integer value previously.
ld can use expression,
for example, it is OK to write
. = SEGMENT_START("foobar", .);
Patch implements that.
llvm-svn: 281831
It was possible situation about some commands just were not processed
(were skipped) because of a bug appeared when constraint checking used.
Testcase is attached.
llvm-svn: 281818
This matches gold and bfd, and is pretty much required by some linker
scripts. They end with commands like
foo 0 : { *(bar) }
if we put any SHF_ALLOC sections after they can have an address that
is too low.
llvm-svn: 281778
This matches bfd behavior. It also makes future changes simpler as we
don't have to worry about ignoring these commands in multiple places
llvm-svn: 281775
With fix for 2 bots. Details about the fix performed is on a review page.
Initial commit message:
This is PR30387:
From PR description:
We fail to parse
SECTIONS
{
foo :
{
*(sec0 EXCLUDE_FILE (zed1.o) sec1 EXCLUDE_FILE (zed2.o) sec2 )
}
}
The semantics according to bfd are:
Include sec1 from every file but zed1.o
Include sec2 from every file but zed2.o
Include sec0 from every file
Patch implements the support.
Differential revision: https://reviews.llvm.org/D24650
llvm-svn: 281754
This fixes pr30367, but more importantly, it changes how we compute offsets.
Now offset computation in a walk over linker script commands, like the
rest of assignAddresses. IMHO this is simpler to understand and if we
ever have to create multiple outputsections or chunks to change how we
handle test/ELF/linkerscript/alternate-sections.s it should be easier
to do it.
llvm-svn: 281736
This is PR30387:
From PR description:
We fail to parse
SECTIONS
{
foo :
{
*(sec0 EXCLUDE_FILE (zed1.o) sec1 EXCLUDE_FILE (zed2.o) sec2 )
}
}
The semantics according to bfd are:
Include sec1 from every file but zed1.o
Include sec2 from every file but zed2.o
Include sec0 from every file
Patch implements the support.
Differential revision: https://reviews.llvm.org/D24650
llvm-svn: 281721
This is PR30386,
SORT_BY_INIT_PRIORITY is a keyword can be used to sort sections by numerical value of the
GCC init_priority attribute encoded in the section name.
Differential revision: https://reviews.llvm.org/D24611
llvm-svn: 281646
Previously, all input files were owned by the symbol table.
Files were created at various places, such as the Driver, the lazy
symbols, or the bitcode compiler, and the ownership of new files
was transferred to the symbol table using std::unique_ptr.
All input files were then free'd when the symbol table is freed
which is on program exit.
I think we don't have to transfer ownership just to free all
instance at once on exit.
In this patch, all instances are automatically collected to a
vector and freed on exit. In this way, we no longer have to
use std::unique_ptr.
Differential Revision: https://reviews.llvm.org/D24493
llvm-svn: 281425
Fixed code that was not checked before on windows for me, because of testcases that are
disabled on that platform atm.
Inital commit message:
"[ELF] - Versionscript: do not treat non-wildcarded names as wildcards."
Previously we incorrectly handled cases when symbol name in extern c++ tag
was enclosed in quotes. Next case was treated as wildcard:
GLIBCXX_3.4 {
extern "C++" {
"aaa*"
}
But it should have not. Quotes around aaa here means that we should have do exact
name matching.
That is PR30268 which has name with pointer is interpreted as wildcard by lld:
extern "C++" {
"operator delete[](void*)";
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D24229
llvm-svn: 281049
Fixed code that was not checked by testcases that are disabled on windows.
Inital commit message:
"[ELF] - Versionscript: do not treat non-wildcarded names as wildcards."
Previously we incorrectly handled cases when symbol name in extern c++ tag
was enclosed in quotes. Next case was treated as wildcard:
GLIBCXX_3.4 {
extern "C++" {
"aaa*"
}
But it should have not. Quotes around aaa here means that we should have do exact
name matching.
That is PR30268 which has name with pointer is interpreted as wildcard by lld:
extern "C++" {
"operator delete[](void*)";
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D24229
llvm-svn: 281045
Previously we incorrectly handled cases when symbol name in extern c++ tag
was enclosed in quotes. Next case was treated as wildcard:
GLIBCXX_3.4 {
extern "C++" {
"aaa*"
}
But it should have not. Quotes around aaa here means that we should have do exact
name matching.
That is PR30268 which has name with pointer is interpreted as wildcard by lld:
extern "C++" {
"operator delete[](void*)";
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D24229
llvm-svn: 281038
We still have to skip a token inside SEARCH_DIR() when -nostdlib is
specified. Previuosly, we didn't skip it, so it caused a parse error.
llvm-svn: 281001
This simplifies error handling as there is now only one place in the
code that needs to consider the possibility that the name is
corrupted. Before we would do it in every access.
llvm-svn: 280937
Previous way of accessing templated methods was a bit bulky,
Patch introduces small interface based solution.
Differential revision: https://reviews.llvm.org/D23872
llvm-svn: 280910
Previously we combined sections by name if linkerscript was used.
For that we had to disable SHF_MERGE handling temporarily, but then
found that implementing it properly will require additional complexity layers like
subsections or something.
At the same time looks we can live with multiple output sections approach for now.
That patch do this change.
Differential revision: https://reviews.llvm.org/D24127
llvm-svn: 280801
Patch implements FILL just as alias for =fillexpr.
This allows to make implementation much shorted and simpler than D24186.
Differential revision: https://reviews.llvm.org/D24227
llvm-svn: 280708
Use std::regex instead of hand written matcher.
Patch based on code and ideas of Rui Ueyama.
Differential revision: https://reviews.llvm.org/D23829
llvm-svn: 280544
Cmd used to be the single central place to dispatch. It is not longer
the case because we have a logic for readProvideOrAssignment().
This patch removes the hash table so that evrything is in a single
function. This is slightly verbose but should improve readability.
Differential Revision: https://reviews.llvm.org/D24200
llvm-svn: 280524
Both bfd and gold accept:
foo = 1K;
bar = 1M;
zed = 1H;
And lowercase forms: k, m, h.
Patch adds support for that.
Differential revision: https://reviews.llvm.org/D24194
llvm-svn: 280494
Previously we used LayoutInputSection class to correctly assign
symbols defined in linker script. This patch removes it and uses
pointer to preceding input section in SymbolAssignment class instead.
Differential revision: https://reviews.llvm.org/D23661
llvm-svn: 280348
Summary:
VERSION commands define symbol versions. The grammar of the
commnad is as follows
VERSION { version-script-commands }
where version-script-commands is
[ name ] { version-definitions }.
Note that we already support version-script-commands because
it is being used for version script command.
This patch is based on George's patch https://reviews.llvm.org/D23609
Reviewers: grimar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24089
llvm-svn: 280284
Symbol assignments outside of SECTIONS command need to be created
even when SECTIONS command is not used.
Differential Revision: https://reviews.llvm.org/D23751
llvm-svn: 280252
Patch removes VersionScriptParser class and moves the members to ScriptParser
It opens road for implementation of VERSION linkerscript command.
Differential revision: https://reviews.llvm.org/D23774
llvm-svn: 280212
Allows adding start and/or end symbols to special output sections,
like .eh_frame_hdr, which aren't lists of regular input sections.
Differential revision: https://reviews.llvm.org/D23716
llvm-svn: 280205
FreeBSD/mips script has non-wildcard filename specifications:
.text :
{
start.o(.text*)
Patch adds support for that, this is PR29115.
Differential revision: https://reviews.llvm.org/D23839
llvm-svn: 280069
GNU gold handles output section fillers as 32-bit values.
This patch makes LLD compatible with that behavior.
Differential revision: https://reviews.llvm.org/D23181
llvm-svn: 280018
Summary:
We previously added these output sections to segments just by type.
Therefore, if there's a PHDRS command like this
PHDRS {
headers PT_PHDR PHDRS;
interp PT_INTERP;
}
SECTIONS {
. = SIZEOF_HEADERS;
.interp : { *(.interp) } :text
}
then .interp was added to "interp" segment even though the linker
is not instructed to do so by SECTIONS command. This patch removes
the default behavior to simplify.
Differential Revision: https://reviews.llvm.org/D23702
llvm-svn: 279414
This patch is opposite to D19024, which made this symbols to be hidden by default.
Unfortunately FreeBSD loader wants to see
start_set_modmetadata_set/stop_set_modmetadata_set in the dynamic symbol table.
They were not placed there because had hidden visibility.
Patch makes them to have default visibility again.
Differential revision: https://reviews.llvm.org/D23552
llvm-svn: 279262
You can force input section alignment within an output section by using SUBALIGN. The
value specified overrides any alignment given by input sections, whether larger or smaller.
SUBALIGN is used in many projects in the wild.
Differential revision: https://reviews.llvm.org/D23063
llvm-svn: 279256
We only support assignments inside SECTIONS, but this does not match
the behavior of GNU linker which also allows them outside SECTIONS.
The only restriction on assignments outside SECTIONS is that they
cannot reference . (they have to be absolute expressions).
Differential Revision: https://reviews.llvm.org/D23598
llvm-svn: 279033
The linker will normally set the LMA equal to the VMA.
You can change that by using the AT keyword.
The expression lma that follows the AT keyword specifies
the load address of the section.
Patch implements this keyword.
Differential revision: https://reviews.llvm.org/D19272
llvm-svn: 278911
This add support for HIDDEN command which can be used to define
a symbol that will be hidden and won't be exported.
Differential Revision: https://reviews.llvm.org/D23534
llvm-svn: 278770
Previously we searched output section by name to assign VA. That did not
work in the case when multiple output sections with different constraints were defined in script.
Testcase shows the possible issue scenario, patch fixes the issue.
Differential revision: https://reviews.llvm.org/D23451
llvm-svn: 278561
After 278461 "Create only one section for a name in LinkerScript."
this loop is excessive.
Patch also reorders code slightly to use early return.
Differential revision: https://reviews.llvm.org/D23442
llvm-svn: 278554
Previously filtering that was used worked incorrectly.
For example for next script it would just remove both sections completely:
SECTIONS {
. = 0x1000;
.aaa : ONLY_IF_RW { *(.aaa.*) }
. = 0x2000;
.aaa : ONLY_IF_RO { *(.aaa.*) }
}
Patch fixes above issues and adds testcase showing the issue. Testcase is a subset of
FreeBSD script which has:
.eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
...
.eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) }
Differential revision: https://reviews.llvm.org/D23326
llvm-svn: 278486
Previously, we were setting LayoutInputSection's OutputSection member
in createSections. Because when we create LayoutInputSectinos, we
don't know the output section for them, so we backfilled the member
in the function. This patch moves the code to backfill it to assignOffsets.
llvm-svn: 278464
Previously, we created two or more output sections if there are
input sections with the same name but with different attributes.
That is a wrong behavior. This patch fixes the issue.
One thing we need to do is to merge output section attributes.
Currently, we create an output section based on the first input
section's attributes. This may make a wrong output section
attributes. What we need to do is to bitwise-OR attributes.
We'll do it in a follow-up patch.
llvm-svn: 278461
The reason why we had to assign offsets only to sections that
don't contain layout sections were unclear. It turned out that
we can live without it.
llvm-svn: 278449
SIZEOF_HEADERS - Return the size in bytes of the output file’s headers.
It is is a feature used in FreeBsd script, for example.
There is a discussion on PR28688 page about it.
Differential revision: https://reviews.llvm.org/D23165
llvm-svn: 278204
Summary:
The comparator function to compare input sections as instructed by
SORT command was a bit too complicated because it needed to handle
four different cases. This patch split it into two function calls.
This patch also simplifies the parser.
Reviewers: grimar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23140
llvm-svn: 277780
ASSERT(exp, message)
Ensure that exp is non-zero. If it is zero, then exit the linker with an error
code, and print message.
ASSERT is useful and was seen in few projects in the wild.
Differential revision: https://reviews.llvm.org/D22912
llvm-svn: 277710
According to spec:
"SORT_BY_ALIGNMENT will sort sections into descending order by
alignment before placing them in the output file"
Previously they were sorted into ascending order.
llvm-svn: 277706
With the previous change, it is now obvious that readProvide in
this context appended new commands to a wrong command list.
It was mistakenly adding new commands to the top level.
Thus, all commands inside output section descriptions were
interpreted as they were written on top level.
PROVIDE command naturally requires symbol assignment support
in the output section description. We don't have that one yet.
I removed the implementation because there's no way to fix it now.
We can resurrect the test once we support the symbol assignment
(with a modification to detect errors that we failed to find as
described.)
llvm-svn: 277687
Previously, many read* functions created new command objects and
add them directly to the top-level data structure. This is not
work for some commands because some commands, such as the assignment,
can appear inside and outside of the output section description.
This patch is to not append objects to the top-level data structure.
Callers are now responsible to do that.
llvm-svn: 277686
Previously, a decimal filler expression is interpreted as a byte value.
Gold on the other hand use it as a 32-bit big-endian value.
This patch fixes the compatibility issue.
Differential Revision: https://reviews.llvm.org/D23142
llvm-svn: 277680
Previously we supported only sorting by name.
When there are nested section sorting commands in linker script, there can be at most 1
level of nesting for section sorting commands.
SORT_BY_NAME (SORT_BY_ALIGNMENT (wildcard section pattern)). It will sort the input
sections by name first, then by alignment if 2 sections have the same name.
SORT_BY_ALIGNMENT (SORT_BY_NAME (wildcard section pattern)). It will sort the input
sections by alignment first, then by name if 2 sections have the same alignment.
SORT_BY_NAME (SORT_BY_NAME (wildcard section pattern)) is treated the same as SORT_
BY_NAME (wildcard section pattern).
SORT_BY_ALIGNMENT (SORT_BY_ALIGNMENT (wildcard section pattern)) is treated the
same as SORT_BY_ALIGNMENT (wildcard section pattern).
All other nested section sorting commands are invalid.
Patch implements that all above.
Differential revision: https://reviews.llvm.org/D23019
llvm-svn: 277583
Previously, Ignore flag is set if we don't want to assign
a value to symbols. It happens if a symbol assingment is in
PROVIDE() and there's already a symbol with the same name.
The previous code had a subtle but that we assume that the
existing symbol is an absolute symbol even if it is not.
This patch fixes the issue by always overwriting an absolute
symbol.
llvm-svn: 277115
All other singleton instances are accessible globally.
CommonInputSection shouldn't be an exception.
Differential Revision: https://reviews.llvm.org/D22935
llvm-svn: 277034
This is a bit of an odd feature. It is normally used in
. = SEGMENT_START(seg, val);
In bfd it evaluates to val or to the value of the corresponding
-T<seg>-segment. Note that the -T<seg>-segment in bfd doesn't actually
change the segment address, just the value this evaluates too,
including in the default linker script.
In gold the -T<seg>-segment options do change the segment address and
seeing this expressions in linker scripts disables the options.
For new this just always evaluates the expression to val.
llvm-svn: 277014
Some scripts can contain SORT(CONSTRUCTORS) expression:
https://svnweb.freebsd.org/base/head/sys/conf/ldscript.amd64?revision=284870&view=markup#l152
for ELF it just a nop:
"When linking object file formats which do not support arbitrary sections, such as ECOFF and XCOFF, the linker will automatically recognize C++ global constructors and destructors by name. For these object file formats, the CONSTRUCTORS command tells the linker to place constructor information in the output section where the CONSTRUCTORS command appears. The CONSTRUCTORS command is ignored for other object file formats."
(http://www.sourceware.org/binutils/docs-2.10/ld_3.html)
So patch implements ignoring.
Differential revision: https://reviews.llvm.org/D22848
llvm-svn: 276965
In compare with what GNU linkers do (https://sourceware.org/binutils/docs/ld/Builtin-Functions.html),
this implementation simple:
Do not touch DATA_SEGMENT_ALIGN, it do what it do now - just aligns to the page boundary.
Parameters of DATA_SEGMENT_RELRO_END is ignored. That should be correct as it is usually just a 24 bytes
shift that allows to protect first 3 entries of got.plt with relro.
(https://svnweb.freebsd.org/base/head/sys/conf/ldscript.amd64?revision=284870&view=markup#l146).
DATA_SEGMENT_RELRO_END just aligns to the page boundary.
That is what expected because all sections that are not affected by relro should be on another memory page.
So at fact the difference with documented behavior is that we do not pad DATA_SEGMENT_ALIGN.
3 entries of got.plt are uncovered by relro, but functionality is simple and equal to lld behavior
for case when script is not given.
Differential revision: https://reviews.llvm.org/D22813
llvm-svn: 276778
We can simplify the evaluation of DATA_SEGMENT_ALIGN
just to simple align(). That way it will work exactly like we have in non-script case.
Change was suggested by Rafael Ávila de Espíndola
Differential revision: https://reviews.llvm.org/D22807
llvm-svn: 276745
We can have Opt.Commands size greater then Sections.size().
For example if we have next script:
SECTIONS {
.aaa : { *(.aaa) }
.bbb : { *(.bbb) }
.ccc : { *(.ccc) }
}
and next code:
.global _start
_start:
nop
.section .aaa,"a"
.quad 0
Then amount of sections is less than amound of Opt.Commands
and if we for example have all commands NoConstraint,
that overflowed the iterator used.
llvm-svn: 276741
createSections function is getting longer, so it is time to split it
into small functions. The reason why the function is long is because
it has deeply nested for-loops. This patch constructs temporary data
to reduce nesting level.
Differential Revision: https://reviews.llvm.org/D22786
llvm-svn: 276706
match() returns true of the first argument, a target string, matches
one of the second argument, a list of glob patterns. Calling the
target string, which is not a glob pattern, "Pattern" was very confusing.
llvm-svn: 276705
This will grow because I have a patch to support more complex
constructs, e.g.:
KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
Let's make this a separate function.
llvm-svn: 276695
PROVIDE request us to define a symbol only if it is referenced and is
not defined by any object included in the link. We created the
symbol in the symbol table no matter what.
Differential Revision: https://reviews.llvm.org/D22739
llvm-svn: 276592
Previously, we handled an expression as a vector of tokens. In other
words, an expression was a vector of uncooked raw StringRefs.
When we need a value of an expression, we used ExprParser to run
the expression.
The separation was needed essentially because parse time is too
early to evaluate an expression. In order to evaluate an expression,
we need to finalize section sizes. Because linker script parsing
is done at very early stage of the linking process, we can't
evaluate expressions while parsing.
The above mechanism worked fairly well, but there were a few
drawbacks.
One thing is that we sometimes have to parse the same expression
more than once in order to find the end of the expression.
In some contexts, linker script expressions have no clear end marker.
So, we needed to recognize balanced expressions and ternary operators.
The other is poor error reporting. Since expressions are parsed
basically twice, and some information that is available at the first
stage is lost in the second stage, it was hard to print out
apprpriate error messages.
This patch fixes the issues with a new approach.
Now the expression parsing is integrated into ScriptParser.
ExprParser class is removed. Expressions are represented as lambdas
instead of vectors of tokens. Lambdas captures information they
need to run themselves when they are created.
In this way, ends of expressions are naturally detected, and
errors are handled in the usual way. This patch also reduces
the amount of code.
Differential Revision: https://reviews.llvm.org/D22728
llvm-svn: 276574
Otherwhise undefined references to symbols defined in linker scripts
are never resolved.
Differential Revision: https://reviews.llvm.org/D22664
llvm-svn: 276536
It is called basic because:
CONSTANT expression can refer to COMMONPAGESIZE and MAXPAGESIZE.
This sizes are usually different and used for possible optimization of
memory consumption.
More details are here: https://sourceware.org/ml/binutils/2002-02/msg00265.html
We currently do not support this optimization, so both CONSTANT(MAXPAGESIZE)
and CONSTANT(COMMONPAGESIZE) just return Target->PageSize value.
DATA_SEGMENT_ALIGN and DATA_SEGMENT_END are used as a part of opt.
The latter one is just ignored now.
According to documentation DATA_SEGMENT_ALIGN has 2 possible
calculation, but since we do not support mentioned opt - it
is always calculated now as (ALIGN(MAXPAGESIZE) + (. & (MAXPAGESIZE - 1))).
In general this should work for now until we deside to support this opt.
Differential revision: https://reviews.llvm.org/D19663
llvm-svn: 276323
It doesn't appear to like this pattern:
for (auto X : Xs)
if (...) { ... }
else ...;
We have heard anecdotes that range based for loops are implemented as a
token rewrite in MSVC's lexer, and that the most challenging part of the
rewrite is finding the end of the for loop. That makes sense, given that
it's a lexer.
llvm-svn: 276315
LinkerScript<ELFT>::assignAddresses is becoming larger and looks
it can be good time for splitting. I expect to can more SectionsCommand's there,
and dispatching some of them separatelly can help to keep method smaller either.
Differential revision: https://reviews.llvm.org/D22506
llvm-svn: 276300
This adds InputSectionDescription command to represent
the input section declaration.
This leads to next cleanup:
SectionRule removed.
ScriptConfiguration::Sections mamber removed.
LinkerScript<ELFT>::getOutputSection() removed.
Differential revision: https://reviews.llvm.org/D22617
llvm-svn: 276283
This change simplifies interaction between Writer and the linker script
because we can make needsInterpSection() a file-scope function.
llvm-svn: 276261
Eugene Leviant