Scop::init is used only during SCoP construction. Therefore ScopBuilder
seems the more appropriate place for it. We integrate it onto its only
caller ScopBuilder::buildScop where some other construction steps
already took place.
Differential Revision: https://reviews.llvm.org/D32908
llvm-svn: 302276
SCoPs with unfeasible runtime context are thrown away and therefore
do not need their uses verified.
The added test case requires a complexity limit to exceed.
Normally, error statements are removed from the SCoP and for that
reason are skipped during the verification. If there is a unfeasible
runtime context (here: because of the complexity limit being reached),
the removal of error statements and other SCoP construction steps are
skipped to not waste time. Error statements are not modeled in SCoPs
and therefore have no requirements on whether the scalars used in
them are available.
llvm-svn: 302234
Since r294891, in MemoryAccess::computeBoundsOnAccessRelation(), we skip
manually bounding the access relation in case the parameter of the load
instruction is already a wrapped set. Later on we assume that the lower
bound on the set is always smaller or equal to the upper bound on the
set. Bug 32715 manages to construct a sign wrapped set, in which case
the assertion does not necessarily hold. Fix this by handling a sign
wrapped set similar to a normal wrapped set, that is skipping the
computation.
Contributed-by: Maximilian Falkenstein <falkensm@student.ethz.ch>
Reviewers: grosser
Subscribers: pollydev, llvm-commits
Tags: #Polly
Differential Revision: https://reviews.llvm.org/D32893
llvm-svn: 302231
This reverts commit 17a84e414adb51ee375d14836d4c2a817b191933.
Patches should have been submitted in the order of:
1. D32852
2. D32854
3. D32431
I mistakenly pushed D32431(3) first. Reverting to push in the correct
order.
llvm-svn: 302217
Summary:
When compiling for GPU, one can now choose to compile for OpenCL or CUDA,
with the corresponding polly-gpu-runtime flag (libopencl / libcudart). The
GPURuntime library (GPUJIT) has been extended with the OpenCL Runtime library
for that purpose, correctly choosing the corresponding library calls to the
option chosen when compiling (via different initialization calls).
Additionally, a specific GPU Target architecture can now be chosen with -polly-gpu-arch (only nvptx64 implemented thus far).
Reviewers: grosser, bollu, Meinersbur, etherzhhb, singam-sanjay
Reviewed By: grosser, Meinersbur
Subscribers: singam-sanjay, llvm-commits, pollydev, nemanjai, mgorny, yaxunl, Anastasia
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32431
llvm-svn: 302215
If a ScopStmt references a (scalar) value, there are multiple
possibilities where this value can come. The decision about what kind of
use it is must be handled consistently at different places, which can be
error-prone. VirtualUse is meant to centralize the handling of the
different types of value uses.
This patch makes ScopBuilder and CodeGeneration use VirtualUse. This
already helps to show inconsistencies with the value handling. In order
to keep this patch NFC, exceptions to the general rules are added.
These might be fixed later if they turn to problems. Overall, this
should result in fewer post-codegen IR-verification errors, but instead
assertion failures in `getNewValue` that are closer to the actual error.
Differential Revision: https://reviews.llvm.org/D32667
llvm-svn: 302157
The test subdirectory POLLY_TEST_DIRECTORIES was heavily outdated and
only used in out-of-LLVM-tree builds
(to generate polly-test-${subdir} targets).
llvm-svn: 302142
For certain test cases we spent over 50% of the scop detection time in
checking if a load is likely invariant. We can avoid most of these checks by
testing early on if a load is expected to be invariant. Doing this reduces
scop-detection time on a large benchmark from 52 seconds to just 25 seconds.
No functional change is expected.
llvm-svn: 302134
This makes sure we still test the case that a PHI-NODE cannot be analyzed by
scalar evolution and consequently must be code generated explicitly. As
Michael's optimization triggers only on a very specific "add %iv, %step"
pattern, just changing 'add' to 'mul' adds back test coverage.
llvm-svn: 302132
LLVM-IR names are commonly available in debug builds, but often not in release
builds. Hence, using LLVM-IR names to identify statements or memory reference
results makes the behavior of Polly depend on the compile mode. This is
undesirable. Hence, we now just number the statements instead of using LLVM-IR
names to identify them (this issue has previously been brought up by Zino
Benaissa).
However, as LLVM-IR names help in making test cases more readable, we add an
option '-polly-use-llvm-names' to still use LLVM-IR names. This flag is by
default set in the polly tests to make test cases more readable.
This change reduces the time in ScopInfo from 32 seconds to 2 seconds for the
following test case provided by Eli Friedman <efriedma@codeaurora.org> (already
used in one of the previous commits):
struct X { int x; };
void a();
#define SIG (int x, X **y, X **z)
typedef void (*fn)SIG;
#define FN { for (int i = 0; i < x; ++i) { (*y)[i].x += (*z)[i].x; } a(); }
#define FN5 FN FN FN FN FN
#define FN25 FN5 FN5 FN5 FN5
#define FN125 FN25 FN25 FN25 FN25 FN25
#define FN250 FN125 FN125
#define FN1250 FN250 FN250 FN250 FN250 FN250
void x SIG { FN1250 }
For a larger benchmark I have on-hand (10000 loops), this reduces the time for
running -polly-scops from 5 minutes to 4 minutes, a reduction by 20%.
The reason for this large speedup is that our previous use of printAsOperand
had a quadratic cost, as for each printed and unnamed operand the full function
was scanned to find the instruction number that identifies the operand.
We do not need to adjust the way memory reference ids are constructured, as
they do not use LLVM values.
Reviewed by: efriedma
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32789
llvm-svn: 302072
- Fixes breakage from commit 5536f.
- Interference with commit 764f3 caused testcase to fail. Reverting
764f3 allows commit 5536f to succeed.
- Generated kernel code was slightly different due to 764f3, which
caused testcase to fail.
llvm-svn: 302021
Before this change a memory reference identifier had the form:
<STMT>_<ACCESSTYPE><ID>_<MEMREF>, e.g., Stmt_bb9_Write0_MemRef_tmp11
After this change, we use the format:
<STMT>_<ACCESSTYPE><ID>, e.g., Stmt_bb9_Write0
The name of the array that is accessed through a memory reference is not
necessary to uniquely identify a memory reference, but was only added to
provide additional information for debugging. We drop this information now
for the following two reasons:
1) This shortens the names and consequently improves readability
2) This removes a second location where we decide on the name of a scop array,
leaving us only with the location where the actual scop array is created.
Having after 2) only a single location to name scop arrays will allow us to
change the naming convention of scop arrays more easily, which we will do
in a future commit to reduce compilation time.
llvm-svn: 302004
This makes it easier to read and possibly even modify the test cases, as there
is no need to keep the variable increment in steps of one. More importantly, by
using explicit variable names we do not need to rely on the implicit numbering
of statements when dumping the scop information.
This makes it easier to read and possibly even modify the test cases.
Furthermore, by using explicit variables we do not need to rely on the implicit
numbering of statements when dumping the scop information. In a future commit,
this implicit numbering will likely not be used any more to refer to LLVM-IR
values as it is very expensive to construct.
llvm-svn: 301689
As has been reported in the previous commit, codegen verification can result in
quadratic compile time increases for large functions with many scops. This is
certainly not something we would like to have in the Polly default
configuration. Hence, we disable codegen verification by default -- also to see
if this resolves some of the compilation timeouts we currently see on the AOSP
buildbots. We still leave this feature in Polly as it has shown _very_ useful
for debugging. In fact, we may want to have a discussion if we can bring this
feature back in a way that does not impact compilation time so much.
Thanks to Eli Friedman <efriedma@codeaurora.org> for reporting this issue and
for providing the test case in the previous commit (where I forgot to
acknowledge him).
llvm-svn: 301670
Before this change, we always tried to verify the function and printed
verification errors, but just did not abort in case -polly-codegen-verify=false
was set and verification failed. As verification can become very cosly -- for
large functions with many scops we may verify the very same function very often
-- this can affect compile time very negatively. Hence, we respect the
-polly-codegen-verify flag with this check, ensuring that no verification is run
if -polly-codegen-verify=false.
This reduces code generation time from 26 seconds to 4 seconds on the test
case below with -polly-codegen-verify=false:
struct X { int x; };
void a();
#define SIG (int x, X **y, X **z)
typedef void (*fn)SIG;
#define FN { for (int i = 0; i < x; ++i) { (*y)[i].x += (*z)[i].x; } a(); }
#define FN5 FN FN FN FN FN
#define FN25 FN5 FN5 FN5 FN5
#define FN125 FN25 FN25 FN25 FN25 FN25
#define FN250 FN125 FN125
#define FN1250 FN250 FN250 FN250 FN250 FN250
void x SIG { FN1250 }
llvm-svn: 301669
generation.
This needs changes to GPURuntime to expose synchronization between host
and device.
1. Needs better function naming, I want a better name than
"getOrCreateManagedDeviceArray"
2. DeviceAllocations is used by both the managed memory and the
non-managed memory path. This exploits the fact that the two code paths
are never run together. I'm not sure if this is the best design decision
Reviewed by: PhilippSchaad
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32215
llvm-svn: 301640
When we introduced in r297375 support for hoisting loads that are known
to be dereferencable without any conditional guard, we forgot to keep the check
to verify that no other write into the very same location exists. This
change ensures now that dereferencable loads are allowed to access everything,
but can only be hoisted in case no conflicting write exists.
This resolves llvm.org/PR32778
Reported-by: Huihui Zhang <huihuiz@codeaurora.org>
llvm-svn: 301582
Polly comes in two library flavors: One loadable module to use the
LLVM framework -load mechanism, and another one that host applications
can link to. These have very different requirements for Polly's
own dependencies.
The loadable module assumes that all its LLVM dependencies are already
available in the address space of the host application, and is not allowed
to bring in its own copy of any LLVM library (including the NVPTX
backend in case of Polly-ACC).
The non-module library is intended to be linked to using
target_link_libraries. CMake would then resolve all of its dependencies,
including NVPTX and ensure that only a single instance of each library
will be used.
Differential Revision: https://reviews.llvm.org/D32442
llvm-svn: 301558
The interpretation of multiple known ValInsts for the same element and
timepoint is that these are alterntivate names for the same values,
for instance a PHINode and the incoming value when knowning it was
the last executed block. That means that known values do not conflict
if there at least (but necessarily all) one common ValInst.
This prinviple also applies to Written values. Add a test for this
principle.
llvm-svn: 301481
The interpretation of multiple known ValInsts for the same element and
timepoint is that these are alterntivate names for the same values,
for instance a PHINode and the incoming value when knowning it was
the last executed block. That means that known values do not conflict
if there at least (but necessarily all) one common ValInst.
Add a case to test this principle.
llvm-svn: 301480
Do not conflict if a write writes the same value as already known.
This change only affects unit tests, but no functional changes are
expected on LLVM-IR, as no Known information is yet extracted and
consequently this functionality is only triggered through unit tests.
Differential Revision: https://reviews.llvm.org/D32026
llvm-svn: 301460
Do not conflict if the value of Existing and Proposed are the same.
This change only affects unit tests, but no functional changes are
expected on LLVM-IR, as no Known information is yet extracted and
consequently this functionality is only triggered through unit tests.
Differential Revision: https://reviews.llvm.org/D32025
llvm-svn: 301301
Added a small change to the way pointer arguments are set in the kernel
code generation. The way the pointer is retrieved now, specifically requests
global address space to be annotated. This is necessary, if the IR should be
run through NVPTX to generate OpenCL compatible PTX.
The changes do not affect the PTX Strings generated for the CUDA target
(nvptx64-nvidia-cuda), but are necessary for OpenCL (nvptx64-nvidia-nvcl).
Additionally, the data layout has been updated to what the NVPTX Backend requests/recommends.
Contributed-by: Philipp Schaad
Reviewers: Meinersbur, grosser, bollu
Reviewed By: grosser, bollu
Subscribers: jlebar, pollydev, llvm-commits, nemanjai, yaxunl, Anastasia
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32215
llvm-svn: 301299
When both, OccupiedAndKnown and Unused are given, use the former only
for the Known values. The relation Unused \union Occupied must always
hold.
This allows us to specify Known independently of Occupied. It is needed
for an artificial test case in https://reviews.llvm.org/D32025.
llvm-svn: 301284
Earlier, the call to buildFlow was:
WAR = buildFlow(Write, Read, MustWrite, Schedule).
This meant that Read could block another Read, since must-sources can
block each other.
Fixed the call to buildFlow to correctly compute Read. The resulting
code needs to do some ISL juggling to get the output we want.
Bug report: https://bugs.llvm.org/show_bug.cgi?id=32623
Reviewers: Meinersbur
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32011
llvm-svn: 301266
The isl unittest modified its PATH variable to point to the LLVM bin dir.
When building out-of-LLVM-tree, it does not contain the
polly-isl-test executable, hence the test fails.
Ensure that the polly-isl-test is written to a bin directory in the
build root, just like it would happen in an inside-LLVM build.
Then, change PATH to include that dir such that the executable in it
is prioritized before any other location.
llvm-svn: 301096
Unittests are linked against a subset of LLVM libraries and its
transitive dependencies resolved by CMake. The information about indirect
library dependency is not available when building separately from
LLVM, which result in missing symbol errors while linking.
Resolve this issue by querying llvm-config about the available
LLVM libraries and link against all of them, since dependence
information is still not available.
llvm-svn: 301095
We can only link against libLLVM.so or the individual libLLVM*.so
components, but not both of them. Doing so results in these components
exist twice in the programs address space, since it is already contained
in libLLVM.so. The observable effect of this is that command line
switches are registered multiple times (once for each instance),
which is an error.
This fixes llvm.org/PR32735.
Reported-by: Singapuram Sanjay Srivallabh <singapuram.sanjay@gmail.com>
llvm-svn: 301020
This change only affects unit tests, but no functional changes are
expected on LLVM-IR, as no Known information is yet extracted and
consequently this functionality is only triggered through unit tests.
Differential Revision: https://reviews.llvm.org/D32027
llvm-svn: 300874
After the isl C++ binding generator is now close to being upstreamed to isl, we
synchronize the latest changes to Polly. These are mostly formatting changes
plus a small interface change for the foreach callback function and some naming
changes in isl::boolean.
llvm-svn: 300398
This commit switches Polly over to the isl::obj::foreach_* implementation, which
is part of the new isl bindings and follows the foreach pattern established in
Polly by Michael Kruse.
The original isl C function:
isl_stat isl_union_set_foreach_set(__isl_keep isl_union_set *uset,
isl_stat (*fn)(__isl_take isl_set *set, void *user), void *user);
which required the user to define a static callback function to which all
interesting parameters are passed via a 'void *' user-pointer, is on the
C++ side available as a function that takes a std::function<>, which can
carry any additional arguments without the need for a user pointer:
stat UnionSet::foreach_set(const std::function<stat(set)> &fn) const;
The following code illustrates the use of the new C++ interface:
auto Lambda = [=, &Result](isl::set Set) -> isl::stat {
auto Shifted = shiftDimension(Set, Pos, Amount);
Result = Result.add(Shifted);
return isl::stat::ok;
}
UnionSet.foreach_set(Lambda);
Polly had some specialized foreach functions which did not require the lambdas
to return a status flag. We remove these functions in this commit to move Polly
completely over to the new isl interface. We may in the future discuss if
functors without return values can be supported easily.
Another extension proposed by Michael Kruse is the use of C++ iterators to allow
the use of normal for loops to iterate over these sets. Such an extension would
allow us to further simplify the code.
Reviewed-by: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D30620
llvm-svn: 300323
Michael Kruse