a missing include from CLog.h.
CLog.h referenced most of the core libclang types but never directly
included Index.h that provides them. Previously it got lucky and other
headers were always included first but with the sorting it ended up
first in one case and stopped compiling. Adding the Index.h include
fixes it right up.
llvm-svn: 202810
A 'remark' is information that is not an error or a warning, but rather some
additional information provided to the user. In contrast to a 'note' a 'remark'
is an independent diagnostic, whereas a 'note' always depends on another
diagnostic.
A typical use case for remark nodes is information provided to the user, e.g.
information provided by the vectorizer about loops that have been vectorized.
This patch provides the initial implementation of 'remarks'. It includes the
actual definiton of the remark nodes, their printing as well as basic parameter
handling. We are reusing the existing diagnostic parameters which means a remark
can be enabled with normal '-Wdiagnostic-name' flags and can be upgraded to
an error using '-Werror=diagnostic-name'. '-Werror' alone does not upgrade
remarks.
This patch is by intention minimal in terms of parameter handling. More
experience and more discussions will most likely lead to further enhancements
in the parameter handling.
llvm-svn: 202475
Most 64-bit targets define int64_t as long int, and AArch64 should
make same definition to follow LP64 model. In GNU tool chain, int64_t
is defined as long int for 64-bit target. So to get consistent with GNU,
it's better Changing int64_t from 'long long int' to 'long int',
otherwise clang will get different name mangling suffix compared with g++.
llvm-svn: 202004
This fixes one immediate bug where an expression with side-effects
could be emitted twice during a NEON call.
It also prepares the way for folding CodeGen for many of the SISD
intrinsics into a table, reducing code size and hopefully increasing
performance eventually ("binary search + few switch cases" should be
better than "lots of switch cases").
llvm-svn: 201667
We used to have special handling for isCrypto and isA64 bits in the
NeonEmitter.cpp file (it knew the former was predicated on __ARM_FEATURE_CRYPTO
and the latter on __aarch64__ and went through various contortions to make sure
the correct intrinsics were emitted under the correct guard.
This is ugly and has obvious scalability problems (e.g. vcvtX intrinsics are
needed, which are ARMv8 only but available on both, yet another category). This
patch moves the #if predicate into the arm_neon.td file directly and makes
NeonEmitter.cpp agnostic about what goes in there.
It also deduplicates arm_neon.td so that each desired intrinsic is mentioned in
just one place (necessary because of the new mechanism for creating
arm_neon.h).
rdar://problem/16035743
llvm-svn: 201660
There are two kinds of automatically generated tests for NEON intrinsics, both
of which can be merged without adversely affecting users.
1. We check that a valid kind of __builtin_neon_XYZ overload is requested (e.g.
we're not asking for a float32x4_t version when it only accepts integers. Since
the __builtin_neon_XYZ intrinsics should only be used in arm_neon.h, relaxing
this test and permitting AArch64 types for AArch32 should not cause a problem.
The extra arm_neon.h definitions should be #ifdefed out anyway.
2. We check that intrinsics which take immediates are actually given
compile-time constants within range. Since all NEON intrinsics should be
backwards compatible, these tests should be identical on AArch64 and AArch32
anyway.
This patch, therefore, merges the separate AArch64 and 32-bit checks.
rdar://problem/16035743
llvm-svn: 201659
This patch adds some very, very sparse initial documentation for some attributes. Additional effort from attribute authors is greatly appreciated.
llvm-svn: 201515
Previously, range checking on the __builtin_neon_XYZ_v Clang intrinsics didn't
take account of the type actually passed to the call, which meant a request
like "vext_s16(a, b, 7)" was allowed through (TableGen was conservative and
allowed 0-7 for all types). This caused an assert in the backend because the
lane doesn't make sense.
llvm-svn: 201232
Introduce a notion of a 'current representation method' for
pointers-to-members.
When starting out, this is set to 'best case' (representation method is
chosen by examining the class, selecting the smallest representation
that would work given the class definition or lack thereof).
This pragma allows the translation unit to dictate exactly what
representation to use, similar to how the inheritance model keywords
operate.
N.B. PCH support is forthcoming.
Differential Revision: http://llvm-reviews.chandlerc.com/D2723
llvm-svn: 201105
Additionally, remove the optional nature of the spelling list index when creating attributes. This is supported by table generating a Spelling enumeration when the spellings for an attribute are distinct enough to warrant it.
llvm-svn: 199378
To declare or define reserved identifers is undefined behaviour in standard
C++. This needs to be addressed in compiler-rt before it can be used in LLVM.
See the list discussion for details.
This reverts commit r198858.
llvm-svn: 198885
encodes the canonical rules for LLVM's style. I noticed this had drifted
quite a bit when cleaning up LLVM, so wanted to clean up Clang as well.
llvm-svn: 198686
important for thread safety attributes, which contain expressions that were
not being visited, and were thus invisible to various tools. There are now
Visit*Attr methods that can be overridden for every attribute.
llvm-svn: 198224
This is a duplicate implementation.
E.g. this patch defines:
float64_t vabd_f64(float64_t a, float64_t b)
But there is already a similar intrinsic "vabdd_f64" with the same types.
Also, this intrinsic will be conflicted to the vector type intrinsic as following(Which is implemented by me and will be committed to trunk):
float64x1_t vabd_f64(float64x1_t a, float64x1_t b).
Two functions shouldn't have a same name in arm_neon.h.
According to ARM ACLE document, such vabd_f64 with float64_t is not existing.
So I revert this commit.
llvm-svn: 196205
I have disabled some attribute subject lines on purpose in Attr.td;
this part is a WIP with the goal being to restore those subjects
incrementally. By commenting them out, it leaves the original behavior
the same as before for those attributes and so those are not
functionality changes.
llvm-svn: 195841
look at the attribute spelling instead. The 'ownership_*' attributes should
probably be split into separate *Attr classes, but that's more than I wanted to
do here.
llvm-svn: 195805
There seem to be quite a few references to the old macro __ARM_NEON__ on the
internet, so I don't think it's a good idea to remove it entirely (at least
yet), but the canonical name does not have the trailing underscores so we
should use that ourselves.
llvm-svn: 195353
substitution failure, allow a flag to be set on the Diagnostic object,
to mark it as 'causes substitution failure'.
Refactor Diagnostic.td and the tablegen to use an enum for SFINAE behavior
rather than a bunch of flags.
llvm-svn: 194444
which we don't think can't have one, only allow it in the tiny number of
attributes which opts into this weird parse rule.
I've manually checked that the handlers for all these attributes can in fact
cope with an identifier as the argument. This is still somewhat terrible; we
should move more fully towards picking the parsing rules based on the
attribute, and make the Parse -> Sema interface more type-safe.
llvm-svn: 193295
that a function can be called in. This reduced the total number of annotations
needed and makes writing more complicated behaviour less burdensome.
Patch by chriswails@gmail.com.
llvm-svn: 191983
When running a make-based command, SATestBuild tries to append a -jN flag
with an appropriate N to run the build in parallel. However, it failed
to take into account that each line read includes a trailing newline
(unless it is the last line of a file without a trailing newline), which
resulted in the "-jN" appearing on a line on its own.
llvm-svn: 190164
The individual group and subgroups tables are now two large tables. The option table stores an index into these two tables instead of pointers. This reduces the size of the options tabe since it doesn't need to store pointers. It also reduces the number of relocations needed.
My build shows this reducing DiagnosticsIDs.o and the clang binary by ~20.5K. It also removes ~400 relocation entries from DiagnosticIDs.o.
llvm-svn: 189438
Patch by Ana Pazos
- Completed implementation of instruction formats:
AdvSIMD three same
AdvSIMD modified immediate
AdvSIMD scalar pairwise
- Completed implementation of instruction classes
(some of the instructions in these classes
belong to yet unfinished instruction formats):
Vector Arithmetic
Vector Immediate
Vector Pairwise Arithmetic
- Initial implementation of instruction formats:
AdvSIMD scalar two-reg misc
AdvSIMD scalar three same
- Intial implementation of instruction class:
Scalar Arithmetic
- Initial clang changes to support arm v8 intrinsics.
Note: no clang changes for scalar intrinsics function name mangling yet.
- Comprehensive test cases for added instructions
To verify auto codegen, encoding, decoding, diagnosis, intrinsics.
llvm-svn: 187568
This will prevent the tests from running on normal make check. You will need to
actually pass in --param run_long_tests=true to LIT in order to run these.
llvm-svn: 184784
The CMake build was still using it because I forgot to s/CLANG/LLVM/ in
the tablegen() call. The Makefile build is already using llvm-tblgen.
llvm-svn: 184192
The Logs directory isn't used for testing, so it's filtered out ahead of
time. However, there's then no reason to include it in version control at
all. Don't error if it's not present.
llvm-svn: 183689
These intrinsics use the __builtin_shuffle() function to extract the
low and high half, respectively, of a 128-bit NEON vector. Currently,
they're defined to use bitcasts to simplify the emitter, so we get code
like:
uint16x4_t vget_low_u32(uint16x8_t __a) {
return (uint32x2_t) __builtin_shufflevector((int64x2_t) __a,
(int64x2_t) __a,
0);
}
While this works, it results in those bitcasts going all the way through
to the IR, resulting in code like:
%1 = bitcast <8 x i16> %in to <2 x i64>
%2 = shufflevector <2 x i64> %1, <2 x i64> undef, <1 x i32>
%zeroinitializer
%3 = bitcast <1 x i64> %2 to <4 x i16>
We can instead easily perform the operation directly on the input vector
like:
uint16x4_t vget_low_u16(uint16x8_t __a) {
return __builtin_shufflevector(__a, __a, 0, 1, 2, 3);
}
Not only is that much easier to read on its own, it also results in
cleaner IR like:
%1 = shufflevector <8 x i16> %in, <8 x i16> undef,
<4 x i32> <i32 0, i32 1, i32 2, i32 3>
This is both easier to read and easier for the back end to reason
about effectively since the operation is obfuscating the source with
bitcasts.
rdar://13894163
llvm-svn: 181865
This change partly addresses a heinous problem we have with the
parsing of attribute arguments that are a lone identifier. Previously,
we would end up parsing the 'align' attribute of this as an expression
"(Align)":
template<unsigned Size, unsigned Align>
class my_aligned_storage
{
__attribute__((align((Align)))) char storage[Size];
};
while this would parse as a "parameter name" 'Align':
template<unsigned Size, unsigned Align>
class my_aligned_storage
{
__attribute__((align(Align))) char storage[Size];
};
The code that handles the alignment attribute would completely ignore
the parameter name, so the while the first of these would do what's
expected, the second would silently be equivalent to
template<unsigned Size, unsigned Align>
class my_aligned_storage
{
__attribute__((align)) char storage[Size];
};
i.e., use the maximal alignment rather than the specified alignment.
Address this by sniffing the "Args" provided in the TableGen
description of attributes. If the first argument is "obviously"
something that should be treated as an expression (rather than an
identifier to be matched later), parse it as an expression.
Fixes <rdar://problem/13700933>.
llvm-svn: 180973
This change partly addresses a heinous problem we have with the
parsing of attribute arguments that are a lone identifier. Previously,
we would end up parsing the 'align' attribute of this as an expression
"(Align)":
template<unsigned Size, unsigned Align>
class my_aligned_storage
{
__attribute__((align((Align)))) char storage[Size];
};
while this would parse as a "parameter name" 'Align':
template<unsigned Size, unsigned Align>
class my_aligned_storage
{
__attribute__((align(Align))) char storage[Size];
};
The code that handles the alignment attribute would completely ignore
the parameter name, so the while the first of these would do what's
expected, the second would silently be equivalent to
template<unsigned Size, unsigned Align>
class my_aligned_storage
{
__attribute__((align)) char storage[Size];
};
i.e., use the maximal alignment rather than the specified alignment.
Address this by sniffing the "Args" provided in the TableGen
description of attributes. If the first argument is "obviously"
something that should be treated as an expression (rather than an
identifier to be matched later), parse it as an expression.
Fixes <rdar://problem/13700933>.
llvm-svn: 180970
Added code to NeonEmitter::runTests so that GenTest gets all of the needed
arguments to invoke the neon test generation methods.
Reviewed by Bob Wilson.
llvm-svn: 179640
Refactored out the method InstructionTypeCode from MangleName for use in
further patches which perform neon tablegen test generation.
Reviewed by Bob Wilson.
llvm-svn: 179636
This patch causes OpInst records to be silently identified with their Non-Op
inst counterparts so that the same test generation infrastructure can be used to
generate tests.
Reviewed by Bob Wilson.
llvm-svn: 179628
We had been defining Neon intrinsics as "static" with always_inline attributes.
If you use them from an extern inline function, you get a warning, e.g.:
static function 'vadd_u8' is used in an inline function with external linkage
This change simply adds the inline keyword to avoid that warning.
llvm-svn: 179406
Benjamin Kramer