Summary:
Historically, we had a switch in the Makefiles for turning on "expensive
checks". This has never been ported to the cmake build, but the
(dead-ish) code is still around.
This will also make it easier to turn it on in buildbots.
Reviewers: chandlerc
Subscribers: jyknight, mzolotukhin, RKSimon, gberry, llvm-commits
Differential Revision: http://reviews.llvm.org/D19723
llvm-svn: 268050
This is the second try. This time we disable this feature if no Polly checkout
is available. For this to work we need to check if tools/polly is present
early enough that our decision is known before cmake generates Config/config.h.
With Polly checked into LLVM it was since a long time possible to compile
clang/opt/bugpoint with Polly support directly linked in, instead of only
providing Polly as a separate loadable module. This commit switches the
default from providing Polly as a module to linking Polly into tools, such
that it becomes unnecessary to load the Polly module when playing with Polly.
Such configuration has shown a lot more convenient for day-to-day Polly use.
This change does not impact the default behavior of any tool, if Polly is not
explicitly enabled when calling clang/opt/bugpoint Polly does not affect
compilation.
This change also does not impact normal LLVM/clang checkouts that do not
contain Polly.
Reviewers: jdoerfert, Meinersbur
Subscribers: pollydev, llvm-commits
Differential Revision: http://reviews.llvm.org/D19711
llvm-svn: 268048
With Polly checked into LLVM it was since a long time possible to compile
clang/opt/bugpoint with Polly support directly linked in, instead of only
providing Polly as a separate loadable module. This commit switches the
default from providing Polly as a module to linking Polly into tools, such
that it becomes unnecessary to load the Polly module when playing with Polly.
Such configuration has shown a lot more convenient for day-to-day Polly use.
This change does not impact the default behavior of any tool, if Polly is not
explicitly enabled when calling clang/opt/bugpoint Polly does not affect
compilation.
This change also does not impact normal LLVM/clang checkouts that do not
contain Polly.
Reviewers: jdoerfert, Meinersbur, sebpop, etherzhhb, zinob, hiraditya
Subscribers: pollydev, llvm-commits
Differential Revision: http://reviews.llvm.org/D19711
llvm-svn: 268033
Summary: Using libtool instead of ar and ranlib on Darwin shaves a minute off my clang build. This is because on Darwin libtool is optimized to give hints to the kernel about filesystem interactions that allow it to be faster.
Reviewers: bogner, pete
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19611
llvm-svn: 267930
If anybody is actually using this, it probably doesn't do what they
think it does. This actually causes the dylib to *export* a
__cxa_atexit symbol, so anything that links it probably loses their
exit time destructors as well as disabling LLVM's.
This just removes the option entirely. If somebody does need this
behaviour we should figure out a more principled way to do it.
This is effectively a revert of r223805.
llvm-svn: 263498
This allows a user to specify "Native" as a target when configuring LLVM. Native will resolve to the LLVM_NATIVE_ARCH, which is the target that supports code generation for the host.
llvm-svn: 262070
The idea here is to provide a customizable install target that only depends on building the things you actually want to install. It relies on each component being installed having an auto-generated install-${component}, which in turn depends only on the target being installed.
This is fundamentally a workaround for the fact that CMake generates build files which have their "install" target depend on the "all" target. This results in "ninja install" building a bunch of unneeded things.
llvm-svn: 261681
This patch adds the necessary plumbing to cmake to build the sources related to
GlobalISel.
To build the sources related to GlobalISel, we need to add -DBUILD_GLOBAL_ISEL=ON.
By default, this is OFF, thus GlobalISel sources will not impact people that do
not explicitly opt-in.
Differential Revision: http://reviews.llvm.org/D15983
llvm-svn: 258344
This reverts r257221.
This caused several build bot failures
* It looks like some of the tests don't work correctly under Windows
* It looks like the lit per test timeout tests fail
So I'm reverting for now. Once the above failures are fixed running
lit's tests can be enabled again.
llvm-svn: 257268
directy with ``make check-lit`` and are run as part of
``make check-all``.
In principle we should run lit's testsuite before testing LLVM using lit
so that any problems with lit get discovered before testing LLVM so we
can bail out early. However this implementation (``check-all`` runs all
tests together) seemed simpler and will still report failing lit tests.
Note that the tests and the configured ``lit.site.cfg`` have to be
copied into the build directory to avoid polluting the source tree.
llvm-svn: 257221
This generates a compile_commands.json file, which tells tools like
YouCompleteMe and clang_complete exactly how to build each source file.
Patch by Justin Lebar!
llvm-svn: 255789
Summary: This adds support for generating dSYM files and stripping debug info from executables and dylibs. It also supports passing -object_path_lto to the linker to generate dSYMs for LTO builds.
Reviewers: bogner, friss
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15133
llvm-svn: 254627
Summary:
This patch adds a new CMake module for working with ExternalProjects. This wrapper for ExternalProject supports using just-built tools and can hook up dependencies properly so that projects get cleared out.
The example usage here is for the llvm test-suite. In this example, the test-suite is setup as dependent on clang and lld if they are in-tree. If the clang or lld binaries change the test-suite is re-configured, cleaned, and rebuilt.
This cleanup and abstraction wrapping ExternalProject can be extended and applied to other runtime libraries like compiler-rt and libcxx.
Reviewers: samsonov, jroelofs, rengolin, jmolloy
Subscribers: jmolloy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14513
llvm-svn: 252747
Summary:
We've had a lot of discussion in the past about the meaningful and useful default behaviors for the llvm-shlib tool. The original implementation was heavily geared toward Apple's use, and I think that was wrong. This patch seeks to correct that.
I've removed the LLVM_DYLIB_EXPORT_ALL variable and made libLLVM export everything by default.
I've also added a new target that is only built on Darwin for libLLVM-C as a library that re-exports the LLVM-C API. This library is not built on Linux because ELF doesn't support re-export libraries in the same way MachO does.
Reviewers: chapuni, resistor, bogner, axw
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13842
llvm-svn: 251411
This is because if you set one of the variables to 0, if(NOT ...) is true, which isn't what you actually want. Should have thought that through better the first time.
llvm-svn: 250841
CMake's set command overwrites existing values. Package maintainers may want or need to set the version variables manually, so we need to only set them if they are not already defined. Note I use the "if(NOT DEFINED ...)" syntax deliberately in the last case because empty string is a valid value for the suffx, but not the other variables.
llvm-svn: 250333
CMake 3.0 introduced the VERSION option for the project() command. If you don't specify the VERSION in the function it will clear out variables matching ${PROJECT_NAME}_VERSION_${MAJOR|MINOR|PATCH|TWEAK}.
This makes overriding LLVM_VERSION_* not work properly with newer versions of CMake. To make this work properly we need to:
(1) Optionally set the policy to NEW
(2) Move default versions and setting PACKAGE_VERSION to before the call to project()
(3) If the policy is set, pass the VERSION and LANGUAGES options in the new format
This change should have no behavioral change for CMake versions before 3.0, and it makes the behavior of later versions match the earlier versions.
llvm-svn: 250275
CMake.
The Go bindings tests in an unoptimized build take over 30 seconds for
me, making it the slowest test in 'check-llvm' by a factor of two.
I've only rigged this up fully to the CMake build. If someone is
interested in rigging it up to the autoconf build, they're welcome to do
so.
llvm-svn: 247243
Summary:
Cross-compilation uses recursive cmake invocations to build native host
tools. These recursive invocations only forward a fixed set of
variables/options, since the native environment is generally the default.
This change adds -DLLVM_TARGET_IS_CROSSCOMPILE_HOST=TRUE to the recursive
cmake invocations, so that cmake files can distinguish these recursive
invocations from top-level ones, which can explain why expected options
are unset.
LLILC will use this to avoid trying to generate its build rules in the
crosscompile native host target (where it is not needed), which would fail
if attempted because LLILC requires a cmake variable passed on the command
line, which is not forwarded in the recursive invocation.
Reviewers: rnk, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12679
llvm-svn: 247151
Summary:
This diff attempts to address the concerns raised in
http://reviews.llvm.org/D12488.
We introduce a new USE_SHARED option to llvm_config,
which, if set, causes the target to be linked against
libLLVM.
add_llvm_utility now uniformly disables linking against
libLLVM. These utilities are not intended for distribution,
and this keeps the option handling more centralised.
llvm-shlib is now processes before any other "tools"
subdirectories, ensuring the libLLVM target is defined
before its dependents.
One main difference from what was requested: llvm_config
does not prune LLVM_DYLIB_COMPONENTS from the components
passed into explicit_llvm_config. This is because the "all"
component does something special, adding additional
libraries (namely libLTO). Adding the component libraries
after libLLVM should not be a problem, as symbols will be
resolved in libLLVM first.
Finally, I'm not really happy with the
DISABLE_LLVM_LINK_LLVM option, but I'm not sure of a
better way to get the following:
- link all tools and shared libraries to libLLVM if
LLVM_LINK_LLVM_DYLIB is set
- some way of explicitly *not* doing so for utilities
and libLLVM itself
Suggestions for improvement here are particularly welcome.
Reviewers: beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12590
llvm-svn: 246918
Summary:
Three closely related changes, to have a mode in which we link all
executables and shared libraries against libLLVM.
1. Add a new LLVM_LINK_LLVM_DYLIB cmake option, which, when ON, will link
executables and shared libraries against libLLVM. For this to work, it
is necessary to also set LLVM_BUILD_LLVM_DYLIB and LLVM_DYLIB_EXPORT_ALL.
It is not strictly necessary to set LLVM_DISABLE_LLVM_DYLIB_ATEXIT, but
we also default to OFF in this mode, or tools tend to misbehave (e.g.
stdout may not flush on exit when output is buffered.)
llvm-config and Tablegen do not use libLLVM, as they are dependencies of
libLLVM.
2. Modify llvm-go to take a new flag, "linkmode=component-libs|dylib".
Depending on which one is passed (default is component-libs), we link
with the individual libraries or libLLVM respectively. We pass in dylib
when LLVM_LINK_LLVM_DYLIB is ON.
3. Fix LLVM_DYLIB_EXPORT_ALL on Linux, and expand the symbols exported to
actually export all. Don't strip leading underscore from symbols on Linux,
and make sure we get all exported symbols and weak-with-default symbols
("W" in nm output). Without these changes, passes won't load because
the "Annotate..." symbols defined in lib/Support/Valigrind.cpp are not
found.
Testing:
- Ran default build ("ninja") with LLVM, clang, compiler-rt, llgo, lldb.
- Ran "check", "check-clang", "check-tsan", "check-libgo" targets. I've
never had much success with LLDB tests, and llgoi is currently broken
so check-llgo fails for an unrelated reason.
- Ran "lldb" to ensure it loads.
Reviewers: chandlerc, beanz, pcc, rnk
Subscribers: rnk, chapuni, sylvestre.ledru, llvm-commits
Differential Revision: http://reviews.llvm.org/D12488
llvm-svn: 246527
Only disable the progress bar when we're generating VS project files,
like we do for XCode. This makes lit use the simple, non-curses progress
bar that looks like this with:
Testing: 0 .. 10.. 20.. 30.. 40.. 50.. 60.. 70.. 80.. 90..
Testing Time: 5.87s
llvm-svn: 244674
Apparently if you make a typo in the argument to CMAKE_BUILD_TYPE,
cmake silently accepts this but doesn't apply any particular build
type to your build. This means you get a build that doesn't really
make any sense - it's sort of a debug build with asserts disabled.
Error out instead.
llvm-svn: 244406
This allows asm files and Cxx files to be compiled with different flags
rather than treating them identically. LLVM itself has no asm files
other than tests, but this setting is inherited by the compiler-rt
project (unless compiled standalone), which does have asm files.
Differential Revision: http://reviews.llvm.org/D10707
llvm-svn: 243419
Enabling Ninja Job Pools needs to be dependent on the CMAKE_MAKE_PROGRAM not the CMAKE_GENERATOR. There are generators (like "Sublime Text 2 - Ninja") that also generate ninja build files. Basing of the CMAKE_MAKE_PROGRAM is the best future-proof way to handle this.
llvm-svn: 239076
The current check never passes, because CMAKE_MAKE_PROGRAM, at least on Linux,
includes the full path to the "ninja" binary; this effectively disables
compile/link jobs pools.
Use CMAKE_GENERATOR STREQUAL "Ninja" as a more reliable check.
llvm-svn: 239069
Summary: I've gotten feedback from users on CMake 2.8 that the compile and link pool options were not working. This is expected so I'm adding a warning so we can report invalid configurations to users.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10193
llvm-svn: 239044
Added a new boolean CMake flag, LLVM_INSTALL_UTILS. When set,
the 'install' target will include in the bin directory the
utils binaries - e.g. FileCheck. This mirrors the autoconfig
behavior.
Test Plan:
Locally verified that utils binaries are copied when flag is set,
and not copied when flag is not set.
Reviewers: jfb, dschuff, beanz
Reviewed By: beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8587
Patch by Mircea Trofin
llvm-svn: 233385
Summary:
This patch is an attempt at making `DenseMapIterator`s "fail-fast".
Fail-fast iterators that have been invalidated due to insertion into
the host `DenseMap` deterministically trip an assert (in debug mode)
on access, instead of non-deterministically hitting memory corruption
issues.
Enabling fail-fast iterators breaks the LLVM C++ ABI, so they are
predicated on `LLVM_ENABLE_ABI_BREAKING_CHECKS`.
`LLVM_ENABLE_ABI_BREAKING_CHECKS` by default flips with
`LLVM_ENABLE_ASSERTS`, but can be clamped to ON or OFF using the CMake /
autoconf build system.
Reviewers: chandlerc, dexonsmith, rnk, zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8351
llvm-svn: 233310
In r233009 we gained specific check-llvm-* build targets for invoking
specific parts of the test suite, but they were copying the
dependencies for check-all, rather than just listing the dependencies
for check-llvm.
This moves the creation of these targets next to the check-llvm
target, and uses that target's configuration rather than the check-all
config.
llvm-svn: 233174
Summary:
This change makes CMake scan for lit suites and generate a target for each lit test suite. The targets follow the format check-<project>-<suite path>.
For example:
check-llvm-unit - Runs the LLVM unit tests
check-llvm-codegen-arm - Runs the ARM codeine tests
Note: These targets are not generated during multi-configuration generators (i.e. Xcode and Visual Studio) because target clutter impacts UI usability.
* Also fixed a minor issue that Duncan pointed out to me I was passing the suite to lit twice
Reviewers: chandlerc
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D8380
llvm-svn: 233009
Summary:
This change makes CMake scan for lit suites and generate a target for each lit test suite. The targets follow the format check-<project>-<suite path>.
For example:
check-llvm-unit - Runs the LLVM unit tests
check-llvm-codegen-arm - Runs the ARM codeine tests
Note: These targets are not generated during multi-configuration generators (i.e. Xcode and Visual Studio) because target clutter impacts UI usability.
Reviewers: chandlerc
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D8380
llvm-svn: 232671
The MSVC linker won't produce a .lib file for an executable that doesn't
export anything, and LLVM doesn't maintain dllexport annotations or .def
files listing all C++ symbols. It also doesn't support exporting all
symbols, like binutils ld.
CMake 3.2 changed the Ninja generator to list both the .exe and .lib
files as outputs of executable build targets. Ninja would always re-link
executables with ENABLE_EXPORTS because the .lib output file was not
present, and therefore the target was out of date.
llvm-svn: 232662
Summary: This change leverages the cross-compiling functionality in the build system to build a release tablegen executable for use during the build.
Reviewers: resistor, rnk
Reviewed By: rnk
Subscribers: rnk, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D7349
llvm-svn: 231842
libc++. This lets me almost self-host on Linux with libc++ and libc++abi
very simply.
Currently, MCJIT and OrcJIT are failing due to uncaught exceptions, and
the Go binding tests are failing to build due to not linking in the
correct C++ standard library.
llvm-svn: 231560
When you use generator expressions in a library sources list,
and then later access the SOURCES property, the OLD behavior
(CMake 3.0 and earlier) would not include these expressions in
the SOURCES property. The NEW behavior (starting in CMake 3.1)
is that they do include the generator expressions in the SOURCES
property.
Differential Revision: http://reviews.llvm.org/D7870
Reviewed By: Chris Bieneman
llvm-svn: 230396
This reverts commit r230062.
Debian stable (wheezy) ships still with cmake 2.8.9.
The commit broke my LLVM/Polly buildbot, to my knowledge our only Linux+cmake
buildbot.
llvm-svn: 230343
Summary: Turns out if you don't set CMAKE_BUILD_TYPE the default is an empty string. This results in some of the behaviors of debug builds, but not all of them. For example ENABLE_ASSERTIONS is false.
Reviewers: rnk
Reviewed By: rnk
Subscribers: chapuni, llvm-commits
Differential Revision: http://reviews.llvm.org/D7360
llvm-svn: 230041
Summary:
* add_llvm_tool and add_llvm_library now add install-${name} targets to install specific components
* added installhdrs target to install just the LLVM headers
* The above changes only apply for single-configuration generators (Ninja, Makefiles...), not for multi-configuration generators (Visual Studio, Xcode...)
Reviewers: pete
Reviewed By: pete
Subscribers: pete, llvm-commits
Differential Revision: http://reviews.llvm.org/D7619
llvm-svn: 229727
If we are building an 64bit installer on Windows we have to adjust the
Program Files path otherwise it uses the wrong Program Files (x86)
directory. Related CMake bug report
http://public.kitware.com/Bug/view.php?id=14211
Patch by Ismail Dönmez!
llvm-svn: 227999
*numerous* places where it was missing in the CMake build. The primary
change here is that the suffix is now actually used for all of the lib
directories in the LLVM project's CMake. The various subprojects still
need similar treatment.
This is the first of a series of commits to try to make LLVM's cmake
effective in a multilib Linux installation. I don't think many people
are seriously using this variable so I'm hoping the fallout will be
minimal. A somewhat unfortunate consequence of the nature of these
commits is that until I land all of them, they will in part make the
brokenness of our multilib support more apparant. At the end, things
should actually work.
llvm-svn: 224919
Summary:
This is desirable for WebKit and other clients of the llvm-shlib because C++ exit time destructors have a tendency to crash when invoked from multi-threaded applications.
Ideally this option will be temporary, because the ideal fix is to just not have exit time destructors.
Reviewers: chapuni, ributzka
Reviewed By: ributzka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6572
llvm-svn: 223805
This change makes use of the new "job pool" capability in cmake 3.0
with ninja generator to allow limiting the number of concurrent jobs
of a certain type.
llvm-svn: 222341
A shared library (unlike a .a), has its dependencies recorded in the library and
we can pass PRIVATE to target_link_libraries.
This patch then removes some bogus dependencies when using
BUILD_SHARED_LIBS=ON. For example, we go from
build lib/CodeGen/CMakeFiles/LLVMCodeGen.dir/AggressiveAntiDepBreaker.cpp.o:
CXX_COMPILER /home/espindola/llvm/llvm/lib/CodeGen/AggressiveAntiDepBreaker.cpp
|| include/llvm/IR/intrinsics_gen lib/libLLVMSupport.so
lib/libLLVMCore.so lib/libLLVMBitReader.so
lib/libLLVMTransformUtils.so lib/libLLVMInstCombine.so
lib/libLLVMScalarOpts.so lib/libLLVMipa.so lib/libLLVMAnalysis.so
lib/libLLVMMCParser.so lib/libLLVMMC.so lib/libLLVMObject.so
lib/libLLVMTarget.so lib/libLLVMProfileData.so
to
build lib/CodeGen/CMakeFiles/LLVMCodeGen.dir/AggressiveAntiDepBreaker.cpp.o:
CXX_COMPILER /home/espindola/llvm/llvm/lib/CodeGen/AggressiveAntiDepBreaker.cpp
|| include/llvm/IR/intrinsics_gen lib/libLLVMSupport.so
lib/libLLVMCore.so lib/libLLVMTransformUtils.so
lib/libLLVMScalarOpts.so lib/libLLVMAnalysis.so lib/libLLVMMC.so
lib/libLLVMTarget.so
In fact, build.ninja goes from 5231028 bytes to 4896759 bytes.
With this, old verisons of bfd ld (2.24 is OK, 2.23 warns) will print a bogus
warning when building with BUILD_SHARED_LIBS.
llvm-svn: 221530
Summary:
This patch adds a new CMake build setting LLVM_BUILD_LLVM_DYLIB, which defaults to OFF. When set to ON, this will generate a shared library containing most of LLVM. The contents of the shared library can be overriden by specifying LLVM_DYLIB_COMPONENTS. LLVM_DYLIB_COMPONENTS can be set to a semi-colon delimited list of any LLVM components that you llvm-config can resolve.
On Windows, unless you are using Cygwin, you must specify an explicit symbol export file using LLVM_EXPORTED_SYMBOL_FILE. On Cygwin and all unix-like platforms if you do not specify LLVM_EXPORTED_SYMBOL_FILE, an export file containing only the LLVM C API will be auto-generated from the list of LLVM components specified in LLVM_DYLIB_COMPONENTS.
Reviewers: rnk
Reviewed By: rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D5890
llvm-svn: 220490
The basic idea is similar to the existing cross compilation support. A directory must be configured to build host versions of tablegen tools and llvm-config. This directory can be user provided (and configured), or it can be created during the build. During a build the native build directory will be configured and built to supply the tablegen tools used during the build. A user could also explicitly provide the tablegen executables to run on the CMake command line.
llvm-svn: 217105
Chris Bieneman