When using the per-target runtime build, it may be desirable to have
different __config_site headers for each target where all targets cannot
share a single configuration.
The layout used for libc++ headers after this change is:
```
include/
c++/
v1/
<libc++ headers except for __config_site>
<target1>/
c++/
v1/
__config_site
<target2>/
c++/
v1/
__config_site
<other targets>
```
This is the most optimal layout since it avoids duplication, the only
headers that's per-target is __config_site, all other headers are
shared across targets. This also means that we no need two
-isystem flags: one for the target-agnostic headers and one for
the target specific headers.
Differential Revision: https://reviews.llvm.org/D89013
This patch changes the AArch32 crypto instructions (sha2 and aes) to
require the specific sha2 or aes features. These features have
already been implemented and can be controlled through the command
line, but do not have the expected result (i.e. `+noaes` will not
disable aes instructions). The crypto feature retains its existing
meaning of both sha2 and aes.
Several small changes are included due to the knock-on effect this has:
- The AArch32 driver has been modified to ensure sha2/aes is correctly
set based on arch/cpu/fpu selection and feature ordering.
- Crypto extensions are permitted for AArch32 v8-R profile, but not
enabled by default.
- ACLE feature macros have been updated with the fine grained crypto
algorithms. These are also used by AArch64.
- Various tests updated due to the change in feature lists and macros.
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D99079
This is a partial revert of b4537c3f51
based on the discussion in https://reviews.llvm.org/D101194. Rather
than using the getMultiarchTriple, we use the getTripleString.
This is useful in runtimes build for example which currently try to
guess the correct triple where to place libraries in the multiarch
layout. Using this flag, the build system can get the correct triple
directly by querying Clang.
Differential Revision: https://reviews.llvm.org/D101400
This is a follow-up of 35dd6470de for the Hurd case, to avoid the
duplication of the i386-gnu path, already provided by
Hurd::getMultiarchTriple.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101324
This is a follow-up of e92d2b80c6 ("[Driver] Detect libstdc++ include
paths for native gcc (-m32 and -m64) on Debian i386") for the Debian Hurd
case, which has the same multiarch name reduction from i686 to i386.
i386-linux-gnu is actually Linux-only, so this moves the code of that commit
to Linux.cpp, and adds the same to Hurd.cpp
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101331
f263418402 ("[Driver] Gnu.cpp: remove obsoleted i386 triple detection
from end-of-life distribution versions") dropped the i686-gnu gcc path, but
GNU/Hurd's gcc is actually using it, and not i386.
This fixes the gcc path and update the tests to reflect it.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101317
GCC supports negative values for -mstack-protector-guard-offset=, this
should be a signed value. Pre-req to D100919.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101325
Different platforms use different rules for multiarch triples so
it's difficult to provide a single method for all platforms. We
instead move the getMultiarchTriple to the ToolChain class and let
individual platforms override it and provide their custom logic.
Differential Revision: https://reviews.llvm.org/D101194
This ensures that the Darwin driver uses a consistent target triple
representation when the triple is printed out to the user.
Differential Revision: https://reviews.llvm.org/D100807
[clang][amdgpu] Use implicit code object version
At present, clang always passes amdhsa-code-object-version on to -cc1. That is
great for certainty over what object version is being used when debugging.
Unfortunately, the command line argument is in AMDGPUBaseInfo.cpp in the amdgpu
target. If clang is used with an llvm compiled with DLLVM_TARGETS_TO_BUILD
that excludes amdgpu, this will be diagnosed (as discovered via D98658):
- Unknown command line argument '--amdhsa-code-object-version=4'
This means that clang, built only for X86, can be used to compile the nvptx
devicertl for openmp but not the amdgpu one. That would shortly spawn fragile
logic in the devicertl cmake to try to guess whether the clang used will work.
This change omits the amdhsa-code-object-version parameter when it matches the
default that AMDGPUBaseInfo.cpp specifies, with a comment to indicate why. As
this is the only part of clang's codegen for amdgpu that depends on the target
in the back end it suffices to build the openmp runtime on most (all?) systems.
It is a non-functional change, though observable in the updated tests and when
compiling with -###. It may cause minor disruption to the amd-stg-open branch.
Revision of D98746, builds on refactor in D101077
Reviewed By: yaxunl
Differential Revision: https://reviews.llvm.org/D101095
[clang][nfc] Split getOrCheckAMDGPUCodeObjectVersion
Separates detection of deprecated or invalid code object version from
returning the version. Written to avoid any behaviour change.
Precursor to a revision of D98746.
Reviewed By: yaxunl
Differential Revision: https://reviews.llvm.org/D101077
This patch adds new clang tool named amdgpu-arch which uses
HSA to detect installed AMDGPU and report back latter's march.
This tool is built only if system has HSA installed.
The value printed by amdgpu-arch is used to fill -march when
latter is not explicitly provided in -Xopenmp-target.
Reviewed By: JonChesterfield, gregrodgers
Differential Revision: https://reviews.llvm.org/D99949
The new layout more closely matches the layout used by other compilers.
This is only used when LLVM_ENABLE_PER_TARGET_RUNTIME_DIR is enabled.
Differential Revision: https://reviews.llvm.org/D100869
This reverts commit 05eeed9691 and after
fixing the impacted lldb tests in 5d1c43f333.
[Driver] Support default libc++ library location on Darwin
Darwin driver currently uses libc++ headers that are part of Clang
toolchain when available (by default ../include/c++/v1 relative to
executable), but it completely ignores the libc++ library itself
because it doesn't pass the location of libc++ library that's part
of Clang (by default ../lib relative to the exceutable) to the linker
always using the system copy of libc++.
This may lead to subtle issues when the compilation fails because the
headers that are part of Clang toolchain are incompatible with the
system library. Either the driver should ignore both headers as well as
the library, or it should always try to use both when available.
This patch changes the driver behavior to do the latter which seems more
reasonable, it makes it easy to test and use custom libc++ build on
Darwin while still allowing the use of system version. This also matches
the Clang driver behavior on other systems.
Differential Revision: https://reviews.llvm.org/D45639
This patch adds new clang tool named amdgpu-arch which uses
HSA to detect installed AMDGPU and report back latter's march.
This tool is built only if system has HSA installed.
The value printed by amdgpu-arch is used to fill -march when
latter is not explicitly provided in -Xopenmp-target.
Reviewed By: JonChesterfield, gregrodgers
Differential Revision: https://reviews.llvm.org/D99949
Darwin driver currently uses libc++ headers that are part of Clang
toolchain when available (by default ../include/c++/v1 relative to
executable), but it completely ignores the libc++ library itself
because it doesn't pass the location of libc++ library that's part
of Clang (by default ../lib relative to the exceutable) to the linker
always using the system copy of libc++.
This may lead to subtle issues when the compilation fails because the
headers that are part of Clang toolchain are incompatible with the
system library. Either the driver should ignore both headers as well as
the library, or it should always try to use both when available.
This patch changes the driver behavior to do the latter which seems more
reasonable, it makes it easy to test and use custom libc++ build on
Darwin while still allowing the use of system version. This also matches
the Clang driver behavior on other systems.
Differential Revision: https://reviews.llvm.org/D45639
This demotes the apple-a12 CPU selection for arm64e to just be the
last-resort default. Concretely, this means:
- an explicitly-specified -mcpu will override the arm64e default;
a user could potentially pick an invalid CPU that doesn't have
v8.3a support, but that's not a major problem anymore
- arm64e-apple-macos (and variants) will pick apple-m1 instead of
being forced to apple-a12.
apple-m1 has the same level of ISA support as apple-a14,
so this is a straightforward mechanical change. However, that
also means this inherits apple-a14's v8.5a+nobti quirkiness.
rdar://68287159
This is a user-facing option, so it doesn't make sense for it to be cc1
only.
Follow-up to D100420
Differential revision: https://reviews.llvm.org/D100759
In baremetal::Linker::ConstructJob, LinkerInput is handled prior to T_Group options,
but on the other side in RISCV::Linker::ConstructJob, it is opposite.
We want it to be consistent whether users are using RISCV::Linker or baremetal::Linker.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D100615
This patch adds new clang tool named amdgpu-arch which uses
HSA to detect installed AMDGPU and report back latter's march.
This tool is built only if system has HSA installed.
The value printed by amdgpu-arch is used to fill -march when
latter is not explicitly provided in -Xopenmp-target.
Reviewed By: JonChesterfield, gregrodgers
Differential Revision: https://reviews.llvm.org/D99949
Test Plan: using kernel ASAN and MSAN implementations in FreeBSD
Reviewed By: emaste, dim, arichardson
Differential Revision: https://reviews.llvm.org/D98286
PATH usage on Windows is case-insensitive. There could be situations
when toolchain path can't be obtained from PATH because of
case-sensitivity of the findVCToolChainViaEnvironment.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D100361
https://lists.llvm.org/pipermail/openmp-dev/2021-March/003940.html reports
test failure in `openmp-offload-gpu.c`. The failure is, when using `-S` in the
clang driver, it still reports bitcode library doesn't exist. However, it is not
exposed in my local run and Phabiractor test. The reason it escaped from Phabricator
test is, the test machine doesn't have CUDA, so `LibDeviceFile` is empty. In this
case, the check of `OPT_S` will be hit, and we get "expected" result. However, if
the test machine has CUDA, `LibDeviceFile` will not be empty, then the check will
not be done, and it just proceeds, trying to add the bitcode library. The reason
it escaped from my local run is, I didn't build ALL targets, so this case was
marked UNSUPPORTED.
Reviewed By: kkwli0
Differential Revision: https://reviews.llvm.org/D98902
This patch adds support for the `-cpp` and `-nocpp` flags. The
implemented semantics match f18 (i.e. the "throwaway" driver), but are
different to gfortran. In Flang the preprocessor is always run. Instead,
`-cpp/-nocpp` are used to control whether predefined and command-line
preprocessor macro definitions are enabled or not. In practice this is
sufficient to model gfortran`s `-cpp/-nocpp`.
In the absence of `-cpp/-nocpp`, the driver will use the extension of
the input file to decide whether to include the standard macro
predefinitions. gfortran's documentation [1] was used to decide which
file extension to use for this.
The logic mentioned above was added in FrontendAction::BeginSourceFile.
That's relatively late in the driver set-up, but this roughly where the
name of the input file becomes available. The logic for deciding between
fixed and free form works in a similar way and was also moved to
FrontendAction::BeginSourceFile for consistency (and to reduce
code-duplication).
The `-cpp/-nocpp` flags are respected also when the input is read from
stdin. This is different to:
* gfortran (behaves as if `-cpp` was used)
* f18 (behaves as if `-nocpp` was used)
Starting with this patch, file extensions are significant and some test
files had to be renamed to reflect that. Where possible, preprocessor
tests were updated so that they can be shared between `f18` and
`flang-new`. This was implemented on top of adding new test for
`-cpp/-nocpp`.
[1] https://gcc.gnu.org/onlinedocs/gcc/Overall-Options.html
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D99292
This allows frontend and backend diagnostic files to all go into the
same place. Have it control the Windows (mini-)dump location.
Differential Revision: https://reviews.llvm.org/D99199
Programmers would like to be able to test direct methods by calling them from a
different linkage unit or mocking them, both of which are impossible. This
patch adds a flag that effectively disables the attribute, which will fix this
when enabled in testable builds. rdar://71190891
Differential revision: https://reviews.llvm.org/D95845
Problem:
On SystemZ we need to open text files in text mode. On Windows, files opened in text mode adds a CRLF '\r\n' which may not be desirable.
Solution:
This patch adds two new flags
- OF_CRLF which indicates that CRLF translation is used.
- OF_TextWithCRLF = OF_Text | OF_CRLF indicates that the file is text and uses CRLF translation.
Developers should now use either the OF_Text or OF_TextWithCRLF for text files and OF_None for binary files. If the developer doesn't want carriage returns on Windows, they should use OF_Text, if they do want carriage returns on Windows, they should use OF_TextWithCRLF.
So this is the behaviour per platform with my patch:
z/OS:
OF_None: open in binary mode
OF_Text : open in text mode
OF_TextWithCRLF: open in text mode
Windows:
OF_None: open file with no carriage return
OF_Text: open file with no carriage return
OF_TextWithCRLF: open file with carriage return
The Major change is in llvm/lib/Support/Windows/Path.inc to only set text mode if the OF_CRLF is set.
```
if (Flags & OF_CRLF)
CrtOpenFlags |= _O_TEXT;
```
These following files are the ones that still use OF_Text which I left unchanged. I modified all these except raw_ostream.cpp in recent patches so I know these were previously in Binary mode on Windows.
./llvm/lib/Support/raw_ostream.cpp
./llvm/lib/TableGen/Main.cpp
./llvm/tools/dsymutil/DwarfLinkerForBinary.cpp
./llvm/unittests/Support/Path.cpp
./clang/lib/StaticAnalyzer/Core/HTMLDiagnostics.cpp
./clang/lib/Frontend/CompilerInstance.cpp
./clang/lib/Driver/Driver.cpp
./clang/lib/Driver/ToolChains/Clang.cpp
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99426
Take gcc-8 on Debian i386 as an example. The target-specific libstdc++ search
path (`GPLUSPLUS_TOOL_INCLUDE_DIR`) uses the multiarch name `i386-linux-gnu`,
instead of the triple of the GCC installation `i686-linux-gnu` (the directory
under `usr/lib/gcc/`):
```
/usr/include/c++/8
/usr/include/i386-linux-gnu/c++/8
/usr/include/c++/8/backward
```
Clang currently detects `/usr/lib/gcc/i686-linux-gnu/8/../../../include/i686-linux-gnu/c++/8`.
This patch changes the second i686-linux-gnu to i386-linux-gnu so that
`/usr/include/i386-linux-gnu/c++/8` can be found.
Fix PR49827 - this was somehow regressed by my previous libstdc++ include path
cleanups and fixes for gcc-cross, but it seems that the paths were never properly tested before.
Differential Revision: https://reviews.llvm.org/D99852
In order to bring up scalable vector support in LLVM incrementally,
we introduced behaviour to emit a warning, instead of an error, when
asking the wrong question of a scalable vector, like asking for the
fixed number of elements.
This patch puts that behaviour under a flag. The default behaviour is
that the compiler will always error, which means that all LLVM unit
tests and regression tests will now fail when a code-path is taken that
still uses the wrong interface.
The behaviour to demote an error to a warning can be individually enabled
for tools that want to support experimental use of scalable vectors.
This patch enables that behaviour when driving compilation from Clang.
This means that for users who want to try out scalable-vector support,
fixed-width codegen support, or build user-code with scalable vector
intrinsics, Clang will not crash and burn when the compiler encounters
such a case.
This allows us to do away with the following pattern in many of the SVE tests:
RUN: .... 2>%t
RUN: cat %t | FileCheck --check-prefix=WARN
WARN-NOT: warning: ...
The behaviour to emit warnings is only temporary and we expect this flag
to be removed in the future when scalable vector support is more stable.
This patch also has fixes the following tests:
unittests:
ScalableVectorMVTsTest.SizeQueries
SelectionDAGAddressAnalysisTest.unknownSizeFrameObjects
AArch64SelectionDAGTest.computeKnownBitsSVE_ZERO_EXTEND_VECTOR_INREG
regression tests:
Transforms/InstCombine/vscale_gep.ll
Reviewed By: paulwalker-arm, ctetreau
Differential Revision: https://reviews.llvm.org/D98856
For DBX, it does not handle column info well. Set -gno-column-info
by default for DBX.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D99703
Currently, support for the x32 ABI is handled as a multilib to the
x86_64 target only. However, full self-hosting x32 systems treating it
as a separate architecture with its own architecture triplets as well as
search paths exist as well, in Debian's x32 port and elsewhere.
This adds the missing architecture triplets and search paths so that
clang can work as a native compiler on x32, and updates the tests so
that they pass when using an x32 libdir suffix.
Additionally, we would previously also assume that objects from any
x86_64-linux-gnu GCC installation could be used to target x32. This
changes the logic so that only GCC installations that include x32
support are used when targetting x32, meaning x86_64-linux-gnux32 GCC
installations, and x86_64-linux-gnu and i686-linux-gnu GCC installations
that include x32 multilib support.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D52050
Based on this debugger type, for now, we plan to:
1: use inline string by default for XCOFF DWARF
2: generate no column info for debug line table.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D99400
This helper method is useful even outside of Gnu toolchains, so move
it to ToolChain so it can be reused in other toolchains such as Fuchsia.
Differential Revision: https://reviews.llvm.org/D88452
This follows GCC and simplifies code. /usr/local/include and TOOL_INCLUDE_DIR
should not conflict with the resource directory include so users should not
observe any difference.
This follows GCC. Having libstdc++/libc++ include paths is not useful
anyway because libstdc++/libc++ header files cannot find features.h.
While here, suppress -stdlib++-isystem with -nostdlibinc.
The contents of the string returned by getenv() is not guaranteed across calls to getenv(). The code to handle the CC_PRINT etc env vars calls getenv() and saves the results in just a char *. The string returned by getenv() needs to be copied and saved. Switching the type of the strings from char * to std::string will do this and manage the alloated memory.
Differential Revision: https://reviews.llvm.org/D98554
These contain clang driver changes for supporting HWASan on Fuchsia.
This includes hwasan multilibs and the dylib path change.
Differential Revision: https://reviews.llvm.org/D99361
Summary: Add -fno-split-stack and rename CC1 option from `-split-stacks`
to `-fsplit-stack`.
Test Plan: check-all
Differential Revision: https://reviews.llvm.org/D99245
This reverts commit aae84b8e39.
The chromium goma folks want to use a Debian sysroot without
lib/x86_64-linux-gnu to perform `clang -c` but no link action. The previous
commit has removed D.getVFS().exists check to make such usage work.
Not only can this save unneeded filesystem stats, it can make `clang
--sysroot=/path/to/debian-sysroot -c a.cc` work (get `-internal-isystem
$sysroot/usr/include/x86_64-linux-gnu`) even without `lib/x86_64-linux-gnu/`.
This should make thakis happy.
Functions specified in `-emscripten-cxx-exceptions-allowed`, which is
set by Emscripten's `EXCEPTION_CATCHING_ALLOWED` setting, can be inlined
in LLVM middle ends before we reach WebAssemblyLowerEmscriptenEHSjLj
pass in the wasm backend and thus don't get transformed for exception
catching.
This fixes the issue by adding `--force-attribute=FUNC_NAME:noinline`
for each function name in `-emscripten-cxx-exceptions-allowed`, which
adds `noinline` attribute to the specified function and thus excludes
the function from inlining candidates in optimization passes.
Fixes the remaining half of
https://github.com/emscripten-core/emscripten/issues/10721.
Reviewed By: sbc100
Differential Revision: https://reviews.llvm.org/D99259
This patch sets the OF_Text flag correctly for the json file created in Clang::DumpCompilationDatabaseFragmentToDir.
Reviewed By: amccarth
Differential Revision: https://reviews.llvm.org/D99200
GlobalISel is currently not enabled when using -flto since the front-end
-mvllm flags don't get passed through. This change fixes this for Darwin
platforms. We have to do this in the driver because the code generator choice
isn't embedded into the bitcode file.
Differential Revision: https://reviews.llvm.org/D99126
This reverts commit 933d146f38 and 21b211a8f2
(which mis-identified the issue) but restores i586-linux-gnu which was
removed by `Gnu.cpp: remove obsoleted i386 triple detection from end-of-life distribution versions`.
Looks like i586-linux-gnu was not dead enough (used in a sysroot by Fuchsia build bot based on Debian jessie:)
but i486-linux-gnu should be very dead by now.
ROCm has changed installation path to /opt/rocm-{release}. Add detection
for that. Also support ROCM_PATH environment variable.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D98867
Debian multiarch additionally adds /usr/include/<triplet> and somehow
Android borrowed the idea. (Note /usr/<triplet>/include is already an
include dir...). On Debian, we should just assume a GCC installation is
available and use its triple.
With this change, on Debian x86-64 (with a MULTILIB_OSDIRNAMES local patch
../lib64 -> ../lib; this does not matter because /usr/lib64/crt{1,i,n}.o do not exist),
`clang++ --target=aarch64-linux-gnu a.cc -Wl,--dynamic-linker=/usr/aarch64-linux-gnu/lib/ld-linux-aarch64.so.1 -Wl,-rpath,/usr/aarch64-linux-gnu/lib`
built executable can run under qemu-user. Previously this failed with
`/usr/lib/gcc-cross/aarch64-linux-gnu/10/../../../../include/c++/10/iostream:38:10: fatal error: 'bits/c++config.h' file not found`
On Arch Linux, due to the MULTILIB_OSDIRNAMES patch and the existence of
/usr/lib64/crt{1,i,n}.o, clang driver may pick
/usr/lib64/crt{1,i,n}.o and cause a linker error. -B can work around the problem.
`clang++ --target=aarch64-linux-gnu -B /usr/aarch64-linux-gnu/lib a.cc -Wl,--dynamic-linker=/usr/aarch64-linux-gnu/lib/ld-linux-aarch64.so.1 -Wl,-rpath,/usr/aarch64-linux-gnu/lib64:/usr/aarch64-linux-gnu/lib`
With this change, for `#include <ar.h>`, `clang --target=aarch64-linux-gnu`
will read `/usr/lib/gcc/aarch64-linux-gnu/10/../../../../aarch64-linux-gnu/include/ar.h`
(on Debian gcc->gcc-cross)
instead of `/usr/include/ar.h`. Some glibc headers (e.g. gnu/stubs.h) are different across architectures.
Seem unnecessary to diverge from GCC here.
Beside, lib/../$OSLibDir can be considered closer to the GCC
installation then the system root. The comment should not apply.
After path resolution, it duplicates a subsequent -L entry. The entry below
(lib/gcc/$triple/$version/../../../../$OSLibDir) usually does not exist (e.g.
Arch Linux; Debian cross gcc). When it exists, it typically just has ld.so (e.g.
Debian native gcc) which cannot cause collision. Removing the -L (similar to
reordering it) is therefore justified.
so that when --sysroot is specified, the detected GCC installation will not be
overridden by another from /usr which happens to have a larger version.
This behavior is particularly inconvenient when the system has a larger version
GCC while the user wants to try out an older sysroot.
Delete some tests from linux-ld.c which overlap with cross-linux.c
In GCC, if `-B $prefix` is specified, `$prefix` is used to find executable files and startup files.
`$prefix/include` is added as an include search directory.
Clang overloads -B with GCC installation detection semantics which make the
behavior less predictable (due to the "largest GCC version wins" rule) and
interact poorly with --gcc-toolchain (--gcc-toolchain can be overridden by -B).
* `clang++ foo.cpp` detects GCC installation under `/usr`.
* `clang++ --gcc-toolchain=Inputs foo.cpp` detects GCC installation under `Inputs`.
* `clang++ -BA --gcc-toolchain=B foo.cpp` detects GCC installation under A and B and the larger version wins. With this patch, only B is used for detection.
* `clang++ -BA foo.cpp` detects GCC installation under `A` and `/usr`, and the larger GCC version wins. With this patch `A` is not used for detection.
This patch changes -B to drop the GCC detection semantics. Its executable
searching semantics are preserved. --gcc-toolchain is the recommended option to
specify the GCC installation detection directory.
(
Note: Clang detects GCC installation in various target dependent directories.
`$sysroot/usr` (sysroot defaults to "") is a common directory used by most targets.
Such a directory is expected to contain something like `lib{,32,64}/gcc{,-cross}/$triple`.
Clang will then construct library/include paths from the directory.
)
Differential Revision: https://reviews.llvm.org/D97993
At the moment "link.exe" is hard-coded as default linker in MSVC.cpp,
so there's no way to use LLD as default linker for MSVC driver.
This patch adds checking of CLANG_DEFAULT_LINKER to MSVC.cpp and
updates unit-tests that expect link.exe linker to explicitly select it
via -fuse-ld=link, so that buildbots and other builds that set
-DCLANG_DEFAULT_LINKER=foobar don't fail these tests.
This is a squash of
- https://reviews.llvm.org/D98493 (MSVC.cpp change) and
- https://reviews.llvm.org/D98862 (unit-tests change)
Reviewed By: maxim-kuvyrkov
Differential Revision: https://reviews.llvm.org/D98935
At the moment "link.exe" is hard-coded as default linker in MSVC.cpp,
so there's no way to use LLD as default linker for MSVC driver.
This patch adds checking of CLANG_DEFAULT_LINKER to MSVC.cpp.
Reviewed By: asl
Differential Revision: https://reviews.llvm.org/D98493
SYCL compilations initiated by the driver will spawn off one or more
frontend compilation jobs (one for device and one for host). This patch
reworks the driver options to make upstreaming this from the downstream
SYCL fork easier.
This patch introduces a language option to identify host executions
(SYCLIsHost) and a -cc1 frontend option to enable this mode. -fsycl and
-fno-sycl become driver-only options that are rejected when passed to
-cc1. This is because the frontend and beyond should be looking at
whether the user is doing a device or host compilation specifically.
Because the frontend should only ever be in one mode or the other,
-fsycl-is-device and -fsycl-is-host are mutually exclusive options.
Remove emit-llvm-bc from addClangTargetOptions as it conflicts with -E for save-temps.
AMDGCN does not yet support linking object files so backend and assemble actions are
skipped, leaving LLVM IR as the output format.
Reviewed By: JonChesterfield, ronlieb
Differential Revision: https://reviews.llvm.org/D96769
This broke the check-profile tests on Mac, see comment on the code
review.
> This is no longer needed, we can add __llvm_profile_runtime directly
> to llvm.compiler.used or llvm.used to achieve the same effect.
>
> Differential Revision: https://reviews.llvm.org/D98325
This reverts commit c7712087cb.
Also reverting the dependent follow-up commit:
Revert "[InstrProfiling] Generate runtime hook for ELF platforms"
> When using -fprofile-list to selectively apply instrumentation only
> to certain files or functions, we may end up with a binary that doesn't
> have any counters in the case where no files were selected. However,
> because on Linux and Fuchsia, we pass -u__llvm_profile_runtime, the
> runtime would still be pulled in and incur some non-trivial overhead,
> especially in the case when the continuous or runtime counter relocation
> mode is being used. A better way would be to pull in the profile runtime
> only when needed by declaring the __llvm_profile_runtime symbol in the
> translation unit only when needed.
>
> This approach was already used prior to 9a041a7522, but we changed it
> to always generate the __llvm_profile_runtime due to a TAPI limitation.
> Since TAPI is only used on Mach-O platforms, we could use the early
> emission of __llvm_profile_runtime there, and on other platforms we
> could change back to the earlier approach where the symbol is generated
> later only when needed. We can stop passing -u__llvm_profile_runtime to
> the linker on Linux and Fuchsia since the generated undefined symbol in
> each translation unit that needed it serves the same purpose.
>
> Differential Revision: https://reviews.llvm.org/D98061
This reverts commit 87fd09b25f.
When using -fprofile-list to selectively apply instrumentation only
to certain files or functions, we may end up with a binary that doesn't
have any counters in the case where no files were selected. However,
because on Linux and Fuchsia, we pass -u__llvm_profile_runtime, the
runtime would still be pulled in and incur some non-trivial overhead,
especially in the case when the continuous or runtime counter relocation
mode is being used. A better way would be to pull in the profile runtime
only when needed by declaring the __llvm_profile_runtime symbol in the
translation unit only when needed.
This approach was already used prior to 9a041a7522, but we changed it
to always generate the __llvm_profile_runtime due to a TAPI limitation.
Since TAPI is only used on Mach-O platforms, we could use the early
emission of __llvm_profile_runtime there, and on other platforms we
could change back to the earlier approach where the symbol is generated
later only when needed. We can stop passing -u__llvm_profile_runtime to
the linker on Linux and Fuchsia since the generated undefined symbol in
each translation unit that needed it serves the same purpose.
Differential Revision: https://reviews.llvm.org/D98061
If --gcc-toolchain is specified, we should detect GCC installation there, and suppress other directories for detection.
Reviewed By: mgorny, manojgupta
Differential Revision: https://reviews.llvm.org/D97894
This moves code that sets the architecture name
and Float ABI into two new functions in
ToolChains/Arch/ARM.cpp. Greatly simplifying ComputeLLVMTriple.
Some light refactoring in setArchNameInTriple to
move local variables closer to their first use.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D98253
Initially, this flag was meant to only be used through cc1 and not directly
through the clang driver. However, we accidentally ended up using this flag
as a driver flag already for selecting multilibs within the fuchsia toolchain.
We're currently in an awkward state where it's only accepted as a driver flag
when targeting Fuchsia, and all other instances it can only be added via
-Xclang. Since we're ready to use this in Fuchsia, we can just expose this to
the driver for simplicity.
Differential Revision: https://reviews.llvm.org/D98375
In -fno-exceptions -fno-asynchronous-unwind-tables -g0 mode,
GCC does not emit `.cfi_*` directives.
```
% diff <(gcc -fno-asynchronous-unwind-tables -dM -E a.c) <(gcc -dM -E a.c)
130a131
> #define __GCC_HAVE_DWARF2_CFI_ASM 1
```
This macro is useful because code can decide whether inline asm should include `.cfi_*` directives.
`.cfi_*` directives without `.cfi_startproc` can cause assembler errors
(integrated assembler: `this directive must appear between .cfi_startproc and .cfi_endproc directives`).
Differential Revision: https://reviews.llvm.org/D97743
By default, the driver uses the compiler-rt builtins and links with
-l:libunwind.a.
Restore the previous behavior by passing --rtlib=libgcc.
Reviewed By: danalbert
Differential Revision: https://reviews.llvm.org/D96404
In D97003, CUDA 9.2 is the minimum requirement for OpenMP offloading on
NVPTX target. We don't need to have macros in source code to select right functions
based on CUDA version. we don't need to compile multiple bitcode libraries of
different CUDA versions for each SM. We don't need to worry about future
compatibility with newer CUDA version.
`-target-feature +ptx61` is used in this patch, which corresponds to the highest
PTX version that CUDA 9.2 can support.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D97198
From `man ld`:
-why_load Log why each object file in a static library is loaded.
That is, what symbol was needed.
Also called -whyload for compatibility.
`-why_load` is the spelling preferred by the linker and `-whyload` an old
compatibility setting. clang should accept the preferred form, and map both
forms to the preferred form.
Differential Revision: https://reviews.llvm.org/D98156
Spack is a package management tool extensively used by HPC community.
As ROCm packages are built by Spack by HPC community, we need to teach
clang driver to detect ROCm installation built by Spack.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D97340
For MinGW targets, we distinguish between an explicitly shared unwinder
library (requested via -shared-libgcc), an explicitly static one
(requested via -static-libgcc or -static) and the default case (which
just passes -lunwind to the linker, which will pick either shared or
static depending on what's available, with the normal linker logic).
This makes the implicit default case (as added in D79995) actually work as
it was intended, when using the g++ driver (which is the main usecase for
libunwind as far as I know).
Differential Revision: https://reviews.llvm.org/D98023
A bug was introduced when adding -munsafe-fp-atomics.
By default it should be off.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D97967
Like nvptx and some other targets, -mconstructor-aliases does not work well with amdgpu,
therefore we disable it in the same approach.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D97959
Add support for the following Fortran dialect options:
- -default*
- -flarge-sizes
It also adds two test cases:
# For checking whether `flang-new` is passing options correctly to `flang-new -fc1`.
# For checking if `fdefault-` arguments are processed properly.
Also moves the Dialect related option parsing to a dedicated function
and adds a member `defaultKinds()` to `CompilerInvocation`
Depends on: D96032
Differential Revision: https://reviews.llvm.org/D96344
Adding it to the general filepaths results in it being added to the
linker arguments. The AIX linker always looks in this path anyway
and adds it as a default library path component. Adding this duplicate
explicitly results in duplicate entries in path in the loader section
of executables and messes up tools like CMake that parse the default
library flags.
Reviewed By: ZarkoCA
Differential Revision: https://reviews.llvm.org/D97574
ccb4124a41 fixed translating -gz=zlib to --compress-debug-sections for
linker invocation for several ToolChains, but omitted FreeBSD.
Differential Revision: https://reviews.llvm.org/D97752
This makes CC1 and driver defaults consistent.
In addition, for more common cases (-g is specified without -gsplit-dwarf), users will not see -fno-split-dwarf-inlining in CC1 options.
Verified that the below is still true:
* `clang -g` => `splitDebugInlining: false` in DICompileUnit
* `clang -g -gsplit-dwarf` => `splitDebugInlining: false` in DICompileUnit
* `clang -g -gsplit-dwarf -fsplit-dwarf-inlining` => no `splitDebugInlining: false`
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D97706
These flags affect coverage mapping (-fcoverage-mapping), not
-fprofile-[instr-]generate so it makes more sense to use the
-fcoverage-* prefix.
Differential Revision: https://reviews.llvm.org/D97434
We introduce -ffile-compilation-dir shorthand to avoid having to set
-fdebug-compilation-dir and -fprofile-compilation-dir separately. This
is similar to -ffile-prefix-map.
Differential Revision: https://reviews.llvm.org/D97433
On Android, the unwinder isn't part of the C++ STL and isn't (in older
versions) exported from libc.so. Instead, the driver links the static
unwinder archive implicitly. Currently, the Android NDK implicitly
links libgcc.a to provide both builtins and the unwinder.
To support switching to compiler-rt builtins and libunwind, make
--rtlib=compiler-rt behave the same way on Android, and implicitly pass
-l:libunwind.a to the linker.
Adjust the -ldl logic. For the Android NDK, the unwinder (whether
libgcc.a or libunwind.a) is linked statically and calls a function in
the dynamic loader for finding unwind tables (e.g. dl_iterate_phdr).
On Android, this function is in libc.a for static executables and
libdl.so otherwise, so -ldl is needed. (glibc doesn't need -ldl because
its libc.so exports dl_iterate_phdr.)
Differential Revision: https://reviews.llvm.org/D96403
This fixes an issue where the toolchain discovery doesn't respect the
VFS's current working directory, specifically clangd not respecting a
relative /winsysroot.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D97437
When targeting a MSVC triple, --dependant-libs with the name of the clang runtime library for profiling is added to the command line args. In it's current implementations clang_rt.profile-<ARCH> is chosen as the name. When building a distribution using LLVM_ENABLE_PER_TARGET_RUNTIME_DIR this fails, due to the runtime file names not having an architecture suffix in the filename.
This patch refactors getCompilerRT and getCompilerRTBasename to always consider per-target runtime directories. getCompilerRTBasename now simply returns the filename component of the path found by getCompilerRT
Differential Revision: https://reviews.llvm.org/D96638
In current implementation of `deviceRTLs`, we're using some functions
that are CUDA version dependent (if CUDA_VERSION < 9, it is one; otheriwse, it
is another one). As a result, we have to compile one bitcode library for each
CUDA version supported. A worse problem is forward compatibility. If a new CUDA
version is released, we have to update CMake file as well.
CUDA 9.2 has been released for three years. Instead of using various weird tricks
to make `deviceRTLs` work with different CUDA versions and still have forward
compatibility, we can simply drop support for CUDA 9.1 or lower version. It has at
least two benifits:
- We don't need to generate bitcode libraries for each CUDA version;
- Clang driver doesn't need to search for the bitcode lib based on CUDA version.
We can claim that starting from LLVM 12, OpenMP offloading on NVPTX target requires
CUDA 9.2+.
Reviewed By: jdoerfert, JonChesterfield
Differential Revision: https://reviews.llvm.org/D97003
This change enables the builtin function declarations
in clang driver by default using the Tablegen solution
along with the implicit include of 'opencl-c-base.h'
header.
A new flag '-cl-no-stdinc' disabling all default
declarations and header includes is added. If any other
mechanisms were used to include the declarations (e.g.
with -Xclang -finclude-default-header) and the new default
approach is not sufficient the, `-cl-no-stdinc` flag has
to be used with clang to activate the old behavior.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D96515
This patch adds support for `-Xflang` in `flang-new`. The semantics are
identical to `-Xclang`.
With the addition of `-Xflang`, we can modify `-test-io` to be a
compiler-frontend only flag. This makes more sense, this flag is:
* very frontend specific
* to be used for development and testing only
* not to be exposed to the end user
Originally we added it to the compiler driver, `flang-new`, in order to
facilitate testing. With `-Xflang` this is no longer needed. Tests are
updated accordingly.
Differential Revision: https://reviews.llvm.org/D96864
This patch moves the creation of the '-Wspir-compat' argument from cc1 to the driver.
Without this change, generating command line arguments from `CompilerInvocation` cannot be done reliably: there's no way to distinguish whether '-Wspir-compat' was passed to cc1 on the command line (should be generated), or if it was created within `CompilerInvocation::CreateFromArgs` (should not be generated).
This is also in line with how other '-W' flags are handled.
(This was introduced in D21567.)
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D97041
Add option -fgpu-sanitize to enable sanitizer for AMDGPU target.
Since it is experimental, it is off by default.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D96835
We currently always store absolute filenames in coverage mapping. This
is problematic for several reasons. It poses a problem for distributed
compilation as source location might vary across machines. We are also
duplicating the path prefix potentially wasting space.
This change modifies how we store filenames in coverage mapping. Rather
than absolute paths, it stores the compilation directory and file paths
as given to the compiler, either relative or absolute. Later when
reading the coverage mapping information, we recombine relative paths
with the working directory. This approach is similar to handling
ofDW_AT_comp_dir in DWARF.
Finally, we also provide a new option, -fprofile-compilation-dir akin
to -fdebug-compilation-dir which can be used to manually override the
compilation directory which is useful in distributed compilation cases.
Differential Revision: https://reviews.llvm.org/D95753
We currently always store absolute filenames in coverage mapping. This
is problematic for several reasons. It poses a problem for distributed
compilation as source location might vary across machines. We are also
duplicating the path prefix potentially wasting space.
This change modifies how we store filenames in coverage mapping. Rather
than absolute paths, it stores the compilation directory and file paths
as given to the compiler, either relative or absolute. Later when
reading the coverage mapping information, we recombine relative paths
with the working directory. This approach is similar to handling
ofDW_AT_comp_dir in DWARF.
Finally, we also provide a new option, -fprofile-compilation-dir akin
to -fdebug-compilation-dir which can be used to manually override the
compilation directory which is useful in distributed compilation cases.
Differential Revision: https://reviews.llvm.org/D95753
would otherwise include template specialization types
This helps reduce the size of the encoded C++ type strings in the binary.
This is enabled by default only on Darwin, but can be enabled/disabled
via command line options.
rdar://63288571
Differential Revision: https://reviews.llvm.org/D96816
The following commits added commandline arguments to control following the Arm
Procedure Call Standard for certain volatile bitfield operations:
- https://reviews.llvm.org/D67399
- https://reviews.llvm.org/D72932
This commit fixes the oversight that these args weren't passed from the driver
to cc1 if appropriate.
Where *appropriate* means:
- `-faapcs-bitfield-width`: is the default, so won't be passed
- `-fno-aapcs-bitfield-width`: should be passed
- `-faapcs-bitfield-load`: should be passed
Differential Revision: https://reviews.llvm.org/D96784
Petr Hosek