Adjust tests to avoid the X / X -> 1 & X % X -> 0 folds while keeping their original purposes.
Differential Revision: https://reviews.llvm.org/D50636
llvm-svn: 340916
This patch issues an error message if Darwin ABI is attempted with the PPC
backend. It also cleans up existing test cases, either converting the test to
use an alternative triple or removing the test if the coverage is no longer
needed.
Updated Tests
-------------
The majority of test cases were updated to use a different triple that does not
include the Darwin ABI. Many tests were also updated to use FileCheck, in place
of grep.
Deleted Tests
-------------
llvm/test/tools/dsymutil/PowerPC/sibling.test was originally added to test
specific functionality of dsymutil using an object file created with an old
version of llvm-gcc for a Powerbook G4. After a discussion with @JDevlieghere he
suggested removing the test.
llvm/test/CodeGen/PowerPC/combine_loads_from_build_pair.ll was converted from a
PPC test to a SystemZ test, as the behavior is also reproducible there.
All other tests that were deleted were specific to the darwin/ppc ABI and no
longer necessary.
Phabricator Review: https://reviews.llvm.org/D50988
llvm-svn: 340795
In removeCopyByCommutingDef, segments from the source live range are
copied into (and merged with) the segments of the target live range.
This is performed for all subranges of the source interval. It can
happen that there will be subranges of the target interval that had
no corresponding subranges in the source interval, and in such cases
these subrages will not be updated. Since the copy being coalesced
is about to be removed, these ranges need to be updated by removing
the segments that are started by the copy.
llvm-svn: 340318
Each use of a value should be jointly dominated by the union of defs and
undefs. It can happen that it will only be jointly dominated by undefs,
and that is still legal. Make sure that the verifier is aware of that.
llvm-svn: 339924
Subregister liveness applies selectively to register classes with certain
properties. Make sure that when it's enabled, it applies to a given virtual
register (in virtual register rewriter).
llvm-svn: 339784
Some instructions expand to more than one decoder group.
This has been hitherto ignored, but is handled with this patch.
Review: Ulrich Weigand
https://reviews.llvm.org/D50187
llvm-svn: 338849
The DAG combiner logic to simplify AND masks in shift counts is invalid.
While it is true that the SystemZ shift instructions ignore all but the
low 6 bits of the shift count, it is still invalid to simplify the AND
masks while the DAG still uses the standard shift operators (which are
*not* defined to match the SystemZ instruction behavior).
Instead, this patch performs equivalent operations during instruction
selection. For completely removing the AND, this now happens via
additional DAG match patterns implemented by a multi-alternative
PatFrags. For simplifying a 32-bit AND to a 16-bit AND, the existing DAG
patterns were already mostly OK, they just needed an output XForm to
actually truncate the immediate value.
Unfortunately, the latter change also exposed a bug in TableGen: it
seems XForms are currently only handled correctly for direct operands of
the outermost operation node. This patch also fixes that bug by simply
recurring through the whole pattern. This should be NFC for all other
targets.
Differential Revision: https://reviews.llvm.org/D50096
llvm-svn: 338521
Since z13, the max group size will be 2 if any μop has more than 3 register
sources.
This has been ignored sofar in the SystemZHazardRecognizer, but is now
handled by recognizing those instructions and adjusting the tracking of
decoding and the cost heuristic for grouping.
Review: Ulrich Weigand
https://reviews.llvm.org/D49847
llvm-svn: 338368
As a consequence of recent discussions
(http://lists.llvm.org/pipermail/llvm-dev/2018-May/123164.html), this patch
changes the SystemZ SchedModels so that the IssueWidth is 6, which is the
decoder capacity, and NumMicroOps become the number of decoder slots needed
per instruction.
In addition, the SchedWrite latencies now match the MachineInstructions
def-operand indexes, and ReadAdvances have been added on instructions with
one register operand and one memory operand.
Review: Ulrich Weigand
https://reviews.llvm.org/D47008
llvm-svn: 337538
See https://reviews.llvm.org/D47106 for details.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47171
This commit drops that patch's changes to:
llvm/test/CodeGen/NVPTX/f16x2-instructions.ll
llvm/test/CodeGen/NVPTX/param-load-store.ll
For some reason, the dos line endings there prevent me from commiting
via the monorepo. A follow-up commit (not via the monorepo) will
finish the patch.
llvm-svn: 336843
With compilation fix.
Original commit message:
D39788 added a '.stack-size' section containing metadata on function stack sizes
to output ELF files behind the new -stack-size-section flag.
This change does following two things on top:
1) Imagine the case when there are -ffunction-sections flag given and there are text sections in COMDATs.
The patch adds a '.stack-size' section into corresponding COMDAT group, so that linker will be able to
eliminate them fast during resolving the COMDATs.
2) Patch sets a SHF_LINK_ORDER flag and links '.stack-size' with the corresponding .text.
With that linker will be able to do -gc-sections on dead stack sizes sections.
Differential revision: https://reviews.llvm.org/D46874
llvm-svn: 335336
D39788 added a '.stack-size' section containing metadata on function stack sizes
to output ELF files behind the new -stack-size-section flag.
This change does following two things on top:
1) Imagine the case when there are -ffunction-sections flag given and there are text sections in COMDATs.
The patch adds a '.stack-size' section into corresponding COMDAT group, so that linker will be able to
eliminate them fast during resolving the COMDATs.
2) Patch sets a SHF_LINK_ORDER flag and links '.stack-size' with the corresponding .text.
With that linker will be able to do -gc-sections on dead stack sizes sections.
Differential revision: https://reviews.llvm.org/D46874
llvm-svn: 335332
Summary:
When the branch folder hoist code into a predecessor it adjust live-in's
in the blocks it hoist code from. However it fail to handle hoisted code
that contain a defed register that originally is live-in in the block
through a super register.
This is fixed by replacing the live-in handling code with calls to
utility functions in LivePhysRegs.
Reviewers: kparzysz, gberry, MatzeB, uweigand, aprantl
Reviewed By: kparzysz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47529
llvm-svn: 334163
Previously, this pass would look at the (static) set returned by
getCallPreservedMask() and add those back as preserved in the case when
isSafeForNoCSROpt() returns false.
A problem is that a target may have to save some registers even when NoCSROpt
takes place. For instance, on SystemZ, the return register is needed upon
return from a function.
Furthermore, getCallPreservedMask() only includes the registers that the
target actually wishes to emit save/restore instructions for. This means that
subregs and (fully saved) superregs are missing.
This patch instead takes the (dynamic) set returned by target for the
function from determineCalleeSaves() and then adds sub/super regs to build
the set to be used when building the RegMask for the function.
Review: Quentin Colombet, Ulrich Weigand
https://reviews.llvm.org/D46315
llvm-svn: 333261
Don't assume the alias of a defined reg is always already in the set.
As the test case in https://bugs.llvm.org/show_bug.cgi?id=36587 discovered,
it is wrong to assume that all the aliases of the defined register in the
*current function* is already present in the UsedPhysRegsMask.
This patch changes this so that any definition in the current function of a
phys-reg always results in all its aliases inserted into the set of defined
registers.
Review: Quentin Colombet
https://reviews.llvm.org/D45157
llvm-svn: 331509
This provides an optimized implementation of SADDO/SSUBO/UADDO/USUBO
as well as ADDCARRY/SUBCARRY on top of the new CC implementation.
In particular, multi-word arithmetic now uses UADDO/ADDCARRY instead
of the old ADDC/ADDE logic, which means we no longer need to use
"glue" links for those instructions. This also allows making full
use of the memory-based instructions like ALSI, which couldn't be
recognized due to limitations in the DAG matcher previously.
Also, the llvm.sadd.with.overflow et.al. intrinsincs now expand to
directly using the ADD instructions and checking for a CC 3 result.
llvm-svn: 331203
Currently, an instruction setting the condition code is linked to
the instruction using the condition code via a "glue" link in the
SelectionDAG. This has a number of drawbacks; in particular, it
means the same CC cannot be used by multiple users. It also makes
it more difficult to efficiently implement SADDO et. al.
This patch changes the back-end to represent CC dependencies as
normal values during SelectionDAG matching, along the lines of
how this is handled in the X86 back-end already.
In addition to the core mechanics of updating all relevant patterns,
this requires a number of additional changes:
- We now need to be able to spill/restore a CC value into a GPR
if necessary. This means providing a copyPhysReg implementation
for moves involving CC, and defining getCrossCopyRegClass.
- Since we still prefer to avoid such spills, we provide an override
for IsProfitableToFold to avoid creating a merged LOAD / ICMP if
this would result in multiple users of the CC.
- combineCCMask no longer requires a single CC user, and no longer
need to be careful about preventing invalid glue/chain cycles.
- emitSelect needs to be more careful in marking CC live-in to
the basic block it generates. Also, we can now optimize the
case of multiple subsequent selects with the same condition
just like X86 does.
llvm-svn: 331202
If we have LOCR instructions, select them directly from SelectionDAG
instead of first going through a pseudo instruction and then using
the custom inserter to emit the LOCR.
Provide Select pseudo-instructions for VR32/VR64 if we have vector
instructions, to avoid having to go through the first 16 FPRs
unnecessarily.
If we do not have LOCFHR, prefer using LOCR followed by a move
over a conditional branch.
llvm-svn: 331191
This patch fixes an issue exposed on the SystemZ build bots when committing
https://reviews.llvm.org/rL327856. The hoisting was temporarily disabled with
an option. This patch now re-enables hoisting and checks that we only hoist a
store instruction when all its operands are either constant caller preserved
registers or immediates.
Differential Revision: https://reviews.llvm.org/D45286
llvm-svn: 329577
If DoneMBB becomes empty it must have CC added to its live-in list, since it
will fall-through into EndMBB. This happens when the CLC loop does the
complete range.
Review: Ulrich Weigand
llvm-svn: 327834
Improve/implement these methods to improve DAG combining. This mainly
concerns intrinsics.
Some constant operands to SystemZISD nodes have been marked Opaque to avoid
transforming back and forth between generic and target nodes infinitely.
Review: Ulrich Weigand
llvm-svn: 327765
The BITCAST handling in computeKnownBits() previously only worked for little
endian.
This patch reverses the iteration over elements for a big endian target which
allows this to work in this case also.
SystemZ test case.
Review: Eli Friedman
https://reviews.llvm.org/D44249
llvm-svn: 327764
splitMergedValStore will split a store into two if target prefers this, or if
-force-split-store is passed.
This patch adds the missing handling for endianness in this function along
with a test case.
Review: Eli Friedman
https://reviews.llvm.org/D44396
llvm-svn: 327375
This adds back-end support for the anyregcc calling convention
for use with patchpoints.
Since all registers are considered call-saved with anyregcc
(except for 0 and 1 which may still be clobbered by PLT stubs
and the like), this required adding support for saving and
restoring vector registers in prologue/epilogue code for the
first time. This is not used by any other calling convention.
llvm-svn: 326612
On SystemZ we need to provide a register save area of 160 bytes to
any called function. This size needs to be added when allocating
stack in the function prologue. However, it was not accounted for
as part of MachineFrameInfo::getStackSize(); instead the back-end
used a private routine getAllocatedStackSize().
This is OK for code-gen purposes, but it breaks other users of
the getStackSize() routine, in particular it breaks the recently-
added -stack-size-section feature.
Fix this by updating the main stack size tracked by common code
(in emitPrologue) instead of using the private routine.
No change in code generation intended.
llvm-svn: 326610
This adds support for specifying vector registers for use with inline
asm statements, either via the 'v' constraint or by explicit register
names (v0 ... v31).
llvm-svn: 326609
Masking first, prevents the extend from being combine with loads. Its also interfering with some vXi1 extraction code.
Differential Revision: https://reviews.llvm.org/D42679
llvm-svn: 326500
Re-enable commit r323991 now that r325931 has been committed to make
MachineOperand::isRenamable() check more conservative w.r.t. code
changes and opt-in on a per-target basis.
llvm-svn: 326208
This reverts commit r323991.
This commit breaks target that don't model all the register constraints
in TableGen. So far the workaround was to set the
hasExtraXXXRegAllocReq, but it proves that it doesn't cover all the
cases.
For instance, when mutating an instruction (like in the lowering of
COPYs) the isRenamable flag is not properly updated. The same problem
will happen when attaching machine operand from one instruction to
another.
Geoff Berry is working on a fix in https://reviews.llvm.org/D43042.
llvm-svn: 325421
When handling vectors with non byte-sized elements, reverse the order of the
elements in the built integer if the target is Big-Endian.
SystemZ tests updated.
Review: Eli Friedman, Ulrich Weigand.
https://reviews.llvm.org/D42786
llvm-svn: 324063
test/CodeGen/SystemZ/vec-trunc-to-i1.ll was marked as a temporary
FAIL when it was previously updated when it needed one more COPY.
This was however wrong, since the loop body had been reduced
significantly, and it was actually an improvement.
Review: Ulrich Weigand.
llvm-svn: 324060
Summary:
This change extends MachineCopyPropagation to do COPY source forwarding
and adds an additional run of the pass to the default pass pipeline just
after register allocation.
This version of this patch uses the newly added
MachineOperand::isRenamable bit to avoid forwarding registers is such a
way as to violate constraints that aren't captured in the
Machine IR (e.g. ABI or ISA constraints).
This change is a continuation of the work started in D30751.
Reviewers: qcolombet, javed.absar, MatzeB, jonpa, tstellar
Subscribers: tpr, mgorny, mcrosier, nhaehnle, nemanjai, jyknight, hfinkel, arsenm, inouehrs, eraman, sdardis, guyblank, fedor.sergeev, aheejin, dschuff, jfb, myatsina, llvm-commits
Differential Revision: https://reviews.llvm.org/D41835
llvm-svn: 323991
Simon Pilgrim