...rather than trying to figure it out from the call site, and having
people complain that we guessed wrong and that a prototype-less call is
the same as a variadic call on their system. More importantly, fix a
crash when there's no decl at the call site (though we could have just
returned a default value).
<rdar://problem/15037033>
llvm-svn: 191599
Now that the CFG includes nodes for the destructors in a delete-expression,
process them in the analyzer using the same common destructor interface
currently used for local, member, and base destructors. Also, check for when
the value is known to be null, in which case no destructor is actually run.
This does not yet handle destructors for deleted /arrays/, which may need
more CFG work. It also causes a slight regression in the location of
double delete warnings; the double delete is detected at the destructor
call, which is implicit, and so is reported on the first access within the
destructor instead of at the 'delete' statement. This will be fixed soon.
Patch by Karthik Bhat!
llvm-svn: 191381
We now have symbols with floating-point type to make sure that
(double)x == (double)x comes out true, but we still can't do much with
these. For now, don't even bother trying to create a floating-point zero
value; just give up on conversion to bool.
PR14634, C++ edition.
llvm-svn: 190953
"+method_name: cannot take ownership of memory allocated by 'new'."
instead of the old
"Memory allocated by 'new' should be deallocated by 'delete', not +method_name"
llvm-svn: 190800
variable uninitialized every time we reach its (reachable) declaration, or
every time we call the surrounding function, promote the warning from
-Wmaybe-uninitialized to -Wsometimes-uninitialized.
This is still slightly weaker than desired: we should, in general, warn
if a use is uninitialized the first time it is evaluated.
llvm-svn: 190623
RegionStore tries to protect against accidentally initializing the same
region twice, but it doesn't take subregions into account very well. If
the outer region being initialized is a struct with an empty base class,
the offset of the first field in the struct will be 0. When we initialize
the base class, we may invalidate the contents of the struct by providing
a default value of Unknown (or some new symbol). We then go to initialize
the member with a zeroing constructor, only to find that the region at
that offset in the struct already has a value. The best we can do here is
to invalidate that value and continue; neither the old default value nor
the new 0 is correct for the entire struct after the member constructor call.
The correct solution for this is to track region extents in the store.
<rdar://problem/14914316>
llvm-svn: 190530
Summary:
If a noreturn destructor is executed while returning a value from a function,
the resulting CFG has had two edges to the exit block. This crashed the analyzer,
because it expects that blocks with no terminators have only one outgoing edge.
I added code to avoid creating the second edge in this case.
PS: The crashes did not manifest themselves always, as usually the
NoReturnFunctionChecker would stop program evaluation before the analyzer hit
the assertion, but in the case of lifetime extended temporaries, the checker
failed to do that (which is a separate bug in itself).
Reviewers: jordan_rose
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1513
llvm-svn: 190125
Summary:
I've had a test failure here while experimenting and I've found that it's
impossible to find what is wrong with the previous structure of the file. So I
have grouped the expected output with the function that produces it, to make
searching for discrepancies more obvious.
Reviewers: jordan_rose
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1595
llvm-svn: 190037
This paves the way for adding support for modeling the destructor of a
region before it is deleted. The statement "delete <expr>" now generates
this series of CFG elements:
1. <expr>
2. [B1.1]->~Foo() (Implicit destructor)
3. delete [B1.1]
Patch by Karthik Bhat!
llvm-svn: 189828
This is an improved version of r186498. It enables ExprEngine to reason about
temporary object destructors. However, these destructor calls are never
inlined, since this feature is still broken. Still, this is sufficient to
properly handle noreturn temporary destructors.
Now, the analyzer correctly handles expressions like "a || A()", and executes the
destructor of "A" only on the paths where "a" evaluted to false.
Temporary destructor processing is still off by default and one has to
explicitly request it by setting cfg-temporary-dtors=true.
Reviewers: jordan_rose
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1259
llvm-svn: 189746
This will never happen in the analyzed code code, but can happen for checkers
that over-eagerly dereference pointers without checking that it's safe.
UnknownVal is a harmless enough value to get back.
Fixes an issue added in r189590, caught by our internal buildbot.
llvm-svn: 189688
Summary:
Previously, Sema was reusing parts of the AST when synthesizing an assignment
operator, turning it into a AS-dag. This caused problems for the static
analyzer, which assumed an expression appears in the tree only once.
Here I make sure to always create a fresh Expr, when inserting something into
the AST, fixing PR16745 in the process.
Reviewers: doug.gregor
CC: cfe-commits, jordan_rose
Differential Revision: http://llvm-reviews.chandlerc.com/D1425
llvm-svn: 189659
Summary:
RegionStoreManager had an optimization which replaces references to empty
structs with UnknownVal. Unfortunately, this check didn't take into account
possible field members in base classes.
To address this, I changed this test to "is empty and has no base classes". I
don't consider it worth the trouble to go through base classes and check if all
of them are empty.
Reviewers: jordan_rose
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1547
llvm-svn: 189590
When casting the address of a FunctionTextRegion to bool, or when adding
constraints to such an address, use a stand-in symbol to represent the
presence or absence of the function if the function is weakly linked.
This is groundwork for possible simple availability testing checks, and
can already catch mistakes involving inverted null checks for
weakly-linked functions.
Currently, the implementation reuses the "extent" symbols, originally created
for tracking the size of a malloc region. Since FunctionTextRegions cannot
be dereferenced, the extent symbol will never be used for anything else.
Still, this probably deserves a refactoring in the future.
This patch does not attempt to support testing the presence of weak
/variables/ (global variables), which would likely require much more of
a change and a generalization of "region structure metadata", like the
current "extents", vs. "region contents metadata", like CStringChecker's
"string length".
Patch by Richard <tarka.t.otter@googlemail.com>!
llvm-svn: 189492
Summary:
-fno-exceptions does not implicitly attach a nothrow specifier to every operator
new. Even in this mode, non-nothrow new must not return a null pointer. Failure
to allocate memory can be signalled by other means, or just by killing the
program. This behaviour is consistent with the compiler - even with
-fno-exceptions, the generated code never tests for null (and would segfault if
the opeator actually happened to return null).
Reviewers: jordan_rose
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1528
llvm-svn: 189452
Summary:
Instead of digging through the ExplodedGraph, to figure out which edge brought
us here, I compute the value of conditional expression by looking at the
sub-expression values.
To do this, I needed to change the liveness algorithm a bit -- now, the full
conditional expression also depends on all atomic sub-expressions, not only the
outermost ones.
Reviewers: jordan_rose
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1340
llvm-svn: 189090
This is still an alpha checker, but we use it in certain tests to make sure
something is not being executed.
This should fix the buildbots.
llvm-svn: 188682
This keeps the analyzer from making silly assumptions, like thinking
strlen(foo)+1 could wrap around to 0. This fixes PR16558.
Patch by Karthik Bhat!
llvm-svn: 188680
This builtin does not actually evaluate its arguments for side effects,
so we shouldn't include them in the CFG. In the analyzer, rely on the
constant expression evaluator to get the proper semantics, at least for
now. (In the future, we could get ambitious and try to provide path-
sensitive size values.)
In theory, this does pose a problem for liveness analysis: a variable can
be used within the __builtin_object_size argument expression but not show
up as live. However, it is very unlikely that such a value would be used
to compute the object size and not used to access the object in some way.
<rdar://problem/14760817>
llvm-svn: 188679
This once again restores notes to following their associated warnings
in -analyzer-output=text mode. (This is still only intended for use as a
debugging aid.)
One twist is that the warning locations in "regular" analysis output modes
(plist, multi-file-plist, html, and plist-html) are reported at a different
location on the command line than in the output file, since the command
line has no path context. This commit makes -analyzer-output=text behave
like a normal output format, which means that the *command line output
will be different* in -analyzer-text mode. Again, since -analyzer-text is
a debugging aid and lo-fi stand-in for a regular output mode, this change
makes sense.
Along the way, remove a few pieces of stale code related to the path
diagnostic consumers.
llvm-svn: 188514
When a region is realloc()ed, MallocChecker records whether it was known
to be allocated or not. If it is, and the reallocation fails, the original
region has to be freed. Previously, when an allocated region escaped,
MallocChecker completely stopped tracking it, so a failed reallocation
still (correctly) wouldn't require freeing the original region. Recently,
however, MallocChecker started tracking escaped symbols, so that if it were
freed we could check that the deallocator matched the allocator. This
broke the reallocation model for whether or not a symbol was allocated.
Now, MallocChecker will actually check if a symbol is owned, and only
require freeing after a failed reallocation if it was owned before.
PR16730
llvm-svn: 188468
Various tests had sprung up over the years which had --check-prefix=ABC on the
RUN line, but "CHECK-ABC:" later on. This happened to work before, but was
strictly incorrect. FileCheck is getting stricter soon though.
Patch by Ron Ofir.
llvm-svn: 188174
Summary:
ExprEngine had code which specificaly disabled using CXXTempObjectRegions in
InitListExprs. This was a hack put in r168757 to silence a false positive.
The underlying problem seems to have been fixed in the mean time, as removing
this code doesn't seem to break anything. Therefore I propose to remove it and
solve PR16629 in the process.
Reviewers: jordan_rose
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1325
llvm-svn: 188059
We process autorelease counts when we exit functions, but if there's an
issue in a synthesized body the report will get dropped. Just skip the
processing for now and let it get handled when the caller gets around to
processing autoreleases.
(This is still suboptimal: objects autoreleased in the caller context
should never be warned about when exiting a callee context, synthesized
or not.)
Second half of <rdar://problem/14611722>
llvm-svn: 187625
Much of our diagnostic machinery is set up to assume that the report
end path location is valid. Moreover, the user may be quite confused
when something goes wrong in our BodyFarm-synthesized function bodies,
which may be simplified or modified from the real implementations.
Rather than try to make this all work somehow, just drop the report so
that we don't try to go on with an invalid source location.
Note that we still handle reports whose /paths/ go through invalid
locations, just not those that are reported in one.
We do have to be careful not to lose warnings because of this.
The impetus for this change was an autorelease being processed within
the synthesized body, and there may be other possible issues that are
worth reporting in some way. We'll take these as they come, however.
<rdar://problem/14611722>
llvm-svn: 187624
Summary:
When binding a temporary object to a static local variable, the analyzer would
complain about a dangling reference even though the temporary's lifetime should
be extended past the end of the function. This commit tries to detect these
cases and construct them in a global memory region instead of a local one.
Reviewers: jordan_rose
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1133
llvm-svn: 187196
These are cases where a scalar type is "destructed", usually due to
template instantiation (e.g. "obj.~T()", where 'T' is 'int'). This has
no actual effect and the analyzer should just skip over it.
llvm-svn: 186927
The analyzer doesn't currently expect CFG blocks with terminators to be
empty, but this can happen when generating conditional destructors for
a complex logical expression, such as (a && (b || Temp{})). Moreover,
the branch conditions for these expressions are not persisted in the
state. Even for handling noreturn destructors this needs more work.
This reverts r186498.
llvm-svn: 186925
Previously, we would simply abort the path when we saw a default member
initialization; now, we actually attempt to evaluate it. Like default
arguments, the contents of these expressions are not actually part of the
current function, so we fall back to constant evaluation.
llvm-svn: 186521
Previously, SValBuilder knew how to evaluate StringLiterals, but couldn't
handle an array-to-pointer decay for constant values. Additionally,
RegionStore was being too strict about loading from an array, refusing to
return a 'char' value from a 'const char' array. Both of these have been
fixed.
llvm-svn: 186520
Previously, the use of a std::initializer_list (actually, a
CXXStdInitializerListExpr) would cause the analyzer to give up on the rest
of the path. Now, it just uses an opaque symbolic value for the
initializer_list and continues on.
At some point in the future we can add proper support for initializer_list,
with access to the elements in the InitListExpr.
<rdar://problem/14340207>
llvm-svn: 186519
Summary:
This patch enables ExprEndgine to reason about temporary object destructors.
However, these destructor calls are never inlined, since this feature is still
broken. Still, this is sufficient to properly handle noreturn temporary
destructors and close bug #15599. I have also enabled the cfg-temporary-dtors
analyzer option by default.
Reviewers: jordan_rose
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1131
llvm-svn: 186498
Previously, we asserted that whenever 'new' did not include a constructor
call, the type must be a non-record type. In C++11, however, uniform
initialization syntax (braces) allow 'new' to construct records with
list-initialization: "new Point{1, 2}".
Removing this assertion should be perfectly safe; the code here matches
what VisitDeclStmt does for regions allocated on the stack.
<rdar://problem/14403437>
llvm-svn: 186028
list is the name of a class, not a namespace. Change the test as well - the previous
version did not test properly.
Fixes radar://14317928.
llvm-svn: 185898
The motivation is to suppresses false use-after-free reports that occur when calling
std::list::pop_front() or std::list::pop_back() twice. The analyzer does not
reason about the internal invariants of the list implementation, so just do not report
any of warnings in std::list.
Fixes radar://14317928.
llvm-svn: 185609
Summary:
The analyzer incorrectly handled noreturn destructors which were hidden inside
function calls. This happened because NoReturnFunctionChecker only listened for
PostStmt events, which are not executed for destructor calls. I've changed it to
listen to PostCall events, which should catch both cases.
Reviewers: jordan_rose
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1056
llvm-svn: 185522
While we don't model pointers-to-members besides "null" and "non-null",
we were using Loc symbols for valid pointers and NonLoc integers for the
null case. This hit the assert committed in r185401.
Fixed by using a true (Loc) null for null member pointers.
llvm-svn: 185444
Summary:
Static analyzer used to abort when encountering AttributedStmts, because it
asserted that the statements should not appear in the CFG. This is however not
the case, since at least the clang::fallthrough annotation makes it through.
This commit simply makes the analyzer ignore the statement attributes.
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1030
llvm-svn: 185417
Re-apply r184511, reverted in r184561, with the trivial default constructor
fast path removed -- it turned out not to be necessary here.
Certain expressions can cause a constructor invocation to zero-initialize
its object even if the constructor itself does no initialization. The
analyzer now handles that before evaluating the call to the constructor,
using the same "default binding" mechanism that calloc() uses, rather
than simply ignoring the zero-initialization flag.
<rdar://problem/14212563>
llvm-svn: 184815
In order to make sure virtual base classes are always initialized once,
the AST contains initializers for the base class in /all/ of its
descendents, not just the immediate descendents. However, at runtime,
the most-derived object is responsible for initializing all the virtual
base classes; all the other initializers will be ignored.
The analyzer now checks to see if it's being called from another base
constructor, and if so does not perform virtual base initialization.
<rdar://problem/14236851>
llvm-svn: 184814
This fixes false positives by allowing us to know that a loop is always entered if
the collection count method returns a positive value and vice versa.
Addresses radar://14169391.
llvm-svn: 184618
Per review from Anna, this really should have been two commits, and besides
it's causing problems on our internal buildbot. Reverting until these have
been worked out.
This reverts r184511 / 98123284826bb4ce422775563ff1a01580ec5766.
llvm-svn: 184561
Certain expressions can cause a constructor invocation to zero-initialize
its object even if the constructor itself does no initialization. The
analyzer now handles that before evaluating the call to the constructor,
using the same "default binding" mechanism that calloc() uses, rather
than simply ignoring the zero-initialization flag.
As a bonus, trivial default constructors are now no longer inlined; they
are instead processed explicitly by ExprEngine. This has a (positive)
effect on the generated path edges: they no longer stop at a default
constructor call unless there's a user-provided implementation.
<rdar://problem/14212563>
llvm-svn: 184511
Summary:
When doing a reinterpret+dynamic cast from an incomplete type, the analyzer
would crash (bug #16308). This fix makes the dynamic cast evaluator ignore
incomplete types, as they can never be used in a dynamic_cast. Also adding a
regression test.
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1006
llvm-svn: 184403
Summary:
When processing a call to a function, which got passed less arguments than it
expects, the analyzer would crash.
I've also added a test for that and a analyzer warning which detects these
cases.
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D994
llvm-svn: 184288
This silences warnings that could occur when one is swapping partially initialized structs. We suppress
not only the assignments of uninitialized members, but any values inside swap because swap could
potentially be used as a subroutine to swap class members.
This silences a warning from std::try::function::swap() on partially initialized objects.
llvm-svn: 184256
We drew the diagnostic edges to wrong statements in cases the note was on a macro.
The fix is simple, but seems to work just fine for a whole bunch of test cases (plist-macros.cpp).
Also, removes an unnecessary edge in edges-new.mm, when function signature starts with a macro.
llvm-svn: 183599
The function in which we were doing it used to be conditionalized. Add a new unconditional
cleanup step.
This fixes PR16227 (radar://14073870) - a crash when generating html output for one of the test files.
llvm-svn: 183451
Previously our edges were completely broken here; now, the final result
is a very simple set of edges in most cases: one up to the "for" keyword
for context, and one into the body of the loop. This matches the behavior
for ObjC for-in loops.
In the AST, however, CXXForRangeStmts are handled very differently from
ObjCForCollectionStmts. Since they are specified in terms of equivalent
statements in the C++ standard, we actually have implicit AST nodes for
all of the semantic statements. This makes evaluation very easy, but
diagnostic locations a bit trickier. Fortunately, the problem can be
generally defined away by marking all of the implicit statements as
part of the top-level for-range statement.
One of the implicit statements in a for-range statement is the declaration
of implicit iterators __begin and __end. The CFG synthesizes two
separate DeclStmts to match each of these decls, but until now these
synthetic DeclStmts weren't in the function's ParentMap. Now, the CFG
keeps track of its synthetic statements, and the AnalysisDeclContext will
make sure to add them to the ParentMap.
<rdar://problem/14038483>
llvm-svn: 183449
We based decisions during analysis and during path generation on whether
or not an expression is consumed, so if a top-level expression has
cleanups it's important for us to look through that.
<rdar://problem/14076125>
llvm-svn: 183368
We previously asserted that there was a top-level function entry edge, but
if the function decl's location is invalid (or within a macro) this edge
might not exist. Change the assertion to an actual check, and don't drop
the first path piece if it doesn't match.
<rdar://problem/14070304>
llvm-svn: 183358
The edge optimizer needs to see edges for, say, implicit casts (which have
the same source location as their operand) to uniformly simplify the
entire path. However, we still don't want to produce edges from a statement
to /itself/, which could occur when two nodes in a row have the same
statement location.
This necessitated moving the check for redundant notes to after edge
optimization, since the check relies on notes being adjacent in the path.
<rdar://problem/14061675>
llvm-svn: 183357
Consider the case where a SwitchStmt satisfied isAllEnumCasesCovered()
as well as having no cases at all (i.e. the enum it covers has no
enumerators).
In this case, we should add a successor to repair the CFG.
This fixes PR16212.
llvm-svn: 183237
...but don't yet migrate over the existing plist tests. Some of these
would be trivial to migrate; others could use a bit of inspection first.
In any case, though, the new edge algorithm seems to have proven itself,
and we'd like more coverage (and more usage) of it going forwards.
llvm-svn: 183165
A.1 -> A -> B
becomes
A.1 -> B
This only applies if there's an edge from a subexpression to its parent
expression, and that is immediately followed by another edge from the
parent expression to a subsequent expression. Normally this is useful for
bringing the edges back to the left side of the code, but when the
subexpression is on a different line the backedge ends up looking strange,
and may even obscure code. In these cases, it's better to just continue
to the next top-level statement.
llvm-svn: 183164
Specifically, if the line is over 80 characters, or if the top-level
statement spans mulitple lines, we should preserve sub-expression edges
even if they form a simple cycle as described in the last commit, because
it's harder to infer what's going on than it is for shorter lines.
llvm-svn: 183163
Generating context arrows can result in quite a few arrows surrounding a
relatively simple expression, often containing only a single path note.
|
1 +--2---+
v/ v
auto m = new m // 3 (the path note)
|\ |
5 +--4---+
v
Note also that 5 and 1 are two ends of the "same" arrow, i.e. they go from
event to event. 3 is not an arrow but the path note itself.
Now, if we see a pair of edges like 2 and 4---where 4 is the reverse of 2
and there is optionally a single path note between them---we will
eliminate /both/ edges. Anything more complicated will be left as is
(more edges involved, an inlined call, etc).
The next commit will refine this to preserve the arrows in a larger
expression, so that we don't lose all context.
llvm-svn: 183162
The old edge builder didn't have a notion of nested statement contexts,
so there was no special treatment of a logical operator inside an if
(or inside another logical operator). The new edge builder always tries
to establish the full context up to the top-level statement, so it's
important to know how much context has been established already rather
than just checking the innermost context.
This restores some of the old behavior for the old edge generation:
the context of a logical operator's non-controlling expression is the
subexpression in the old edge algorithm, but the entire operator
expression in the new algorithm.
llvm-svn: 183160
The current edge-generation algorithm sometimes creates edges from a
top-level statement A to a sub-expression B.1 that's not at the start of B.
This creates a "swoosh" effect where the arrow is drawn on top of the
text at the start of B. In these cases, the results are clearer if we see
an edge from A to B, then another one from B to B.1.
Admittedly, this does create a /lot/ of arrows, some of which merely hop
into a subexpression and then out again for a single note. The next commit
will eliminate these if the subexpression is simple enough.
This updates and reuses some of the infrastructure from the old edge-
generation algorithm to find the "enclosing statement" context for a
given expression. One change in particular marks the context of the
LHS or RHS of a logical binary operator (&&, ||) as the entire operator
expression, rather than the subexpression itself. This matches our behavior
for ?:, and allows us to handle nested context information.
<rdar://problem/13902816>
llvm-svn: 183159
Neither the compiler nor the analyzer are doing anything with non-VarDecl
decls in the CFG, and having them there creates extra nodes in the
analyzer's path diagnostics. Simplify the CFG (and the path edges) by
simply leaving them out. We can always add interesting decls back in when
they become relevant.
Note that this only affects decls declared in a DeclStmt, and then only
those that appear within a function body.
llvm-svn: 183157
Jordan has pointed out that it is valuable to warn in cases when the arguments to init escape.
For example, NSData initWithBytes id not going to free the memory.
llvm-svn: 183062
In many cases, the edge from the "if" to the condition, followed by an edge from the branch condition to the target code, is uninteresting.
In such cases, we should fold the two edges into one from the "if" to the target.
This also applies to loops.
Implements <rdar://problem/14034763>.
llvm-svn: 183018
...and make this work correctly in the current codebase.
After living on this for a while, it turns out to look very strange for
inlined functions that have only a single statement, and somewhat strange
for inlined functions in general (since they are still conceptually in the
middle of the path, and there is a function-entry path note).
It's worth noting that this only affects inlined functions; in the new
arrow generation algorithm, the top-level function still starts at the
first real statement in the function body, not the enclosing CompoundStmt.
This reverts r182078 / dbfa950abe0e55b173286a306ee620eff5f72ea.
llvm-svn: 182963
It is okay to declare a block without an argument list: ^ {} or ^void {}.
In these cases, the BlockDecl's signature-as-written will just contain
the return type, rather than the entire function type. It is unclear if
this is intentional, but the analyzer shouldn't crash because of it.
<rdar://problem/14018351>
llvm-svn: 182948
Most loop notes (like "entering loop body") are attached to the condition
expression guarding a loop or its equivalent. For loops may not have a
condition expression, though. Rather than crashing, just use the entire
ForStmt as the location. This is probably the best we can do.
<rdar://problem/14016063>
llvm-svn: 182904
In C, 'void' is treated like any other incomplete type, and though it is
never completed, you can cast the address of a void-typed variable to do
something useful. (In C++ it's illegal to declare a variable with void type.)
Previously we asserted on this code; now we just treat it like any other
incomplete type.
And speaking of incomplete types, we don't know their extent. Actually
check that in TypedValueRegion::getExtent, though that's not being used
by any checkers that are on by default.
llvm-svn: 182880
This gives slightly better precision, specifically, in cases where a non-typed region represents the array
or when the type is a non-array type, which can happen when an array is a result of a reinterpret_cast.
llvm-svn: 182810
It’s important for us to reason about the cast as it is used in std::addressof. The reason we did not
handle the cast previously was a crash on a test case (see commit r157478). The crash was in
processing array to pointer decay when the region type was not an array. Address the issue, by
just returning an unknown in that case.
llvm-svn: 182808
In addition to enabling more code reuse, this suppresses some false positives by allowing us to
compare an element region to its base. See the ptr-arith.cpp test cases for an example.
llvm-svn: 182780
When generating path notes, implicit function bodies are shown at the call
site, so that, say, copying a POD type in C++ doesn't jump you to a header
file. This is especially important when the synthesized function itself
calls another function (or block), in which case we should try to jump the
user around as little as possible.
By checking whether a called function has a body in the AST, we can tell
if the analyzer synthesized the body, and if we should therefore collapse
the call down to the call site like a true implicitly-defined function.
<rdar://problem/13978414>
llvm-svn: 182677
The new edge algorithm would keep track of the previous location in each
location context, so that it could draw arrows coming in and out of each
inlined call. However, it tried to access the location of the call before
it was actually set (at the CallEnter node). This only affected
unterminated calls at the end of a path; calls with visible exit nodes
already had a valid location.
This patch ditches the location context map, since we're processing the
nodes in order anyway, and just unconditionally updates the PrevLoc
variable after popping out of an inlined call.
<rdar://problem/13983470>
llvm-svn: 182676
Currently, blocks instantiated in templates lose their "signature as
written"; it's not clear if this is intentional. Change the analyzer's
use of BlockDecl::getSignatureAsWritten to check whether or not the
signature is actually there.
<rdar://problem/13954714>
llvm-svn: 182497
The crash is triggered by the newly added option (-analyzer-config report-in-main-source-file=true) introduced in r182058.
Note, ideally, we’d like to report the issue within the main source file here as well.
For now, just do not crash.
llvm-svn: 182445
The analyzer can't see the reference count for shared_ptr, so it doesn't
know whether a given destruction is going to delete the referenced object.
This leads to spurious leak and use-after-free warnings.
For now, just ban destructors named '~shared_ptr', which catches
std::shared_ptr, std::tr1::shared_ptr, and boost::shared_ptr.
PR15987
llvm-svn: 182071
Previously, we’ve used the last location of the analyzer issue path as the location of the
report. This might not provide the best user experience, when one analyzer a source
file and the issue appears in the header. Introduce an option to use the last location
of the path that is in the main source file as the report location.
New option can be enabled with -analyzer-config report-in-main-source-file=true.
llvm-svn: 182058
found for a receiver, note where receiver class
is declaraed (this is most common when receiver is a forward
class). // rdar://3258331
llvm-svn: 181847
In most cases it is, by just looking at the name. Also, this check prevents the heuristic from working in strange user settings.
radar://13839692
llvm-svn: 181615
Consider this example:
char *p = malloc(sizeof(char));
systemFunction(&p);
free(p);
In this case, when we call systemFunction, we know (because it's a system
function) that it won't free 'p'. However, we /don't/ know whether or not
it will /change/ 'p', so the analyzer is forced to invalidate 'p', wiping
out any bindings it contains. But now the malloc'd region looks like a
leak, since there are no more bindings pointing to it, and we'll get a
spurious leak warning.
The fix for this is to notice when something is becoming inaccessible due
to invalidation (i.e. an imperfect model, as opposed to being explicitly
overwritten) and stop tracking it at that point. Currently, the best way
to determine this for a call is the "indirect escape" pointer-escape kind.
In practice, all the patch does is take the "system functions don't free
memory" special case and limit it to direct parameters, i.e. just the
arguments to a call and not other regions accessible to them. This is a
conservative change that should only cause us to escape regions more
eagerly, which means fewer leak warnings.
This isn't perfect for several reasons, the main one being that this
example is treated the same as the one above:
char **p = malloc(sizeof(char *));
systemFunction(p + 1);
// leak
Currently, "addresses accessible by offsets of the starting region" and
"addresses accessible through bindings of the starting region" are both
considered "indirect" regions, hence this uniform treatment.
Another issue is our longstanding problem of not distinguishing const and
non-const bindings; if in the first example systemFunction's parameter were
a char * const *, we should know that the function will not overwrite 'p',
and thus we can safely report the leak.
<rdar://problem/13758386>
llvm-svn: 181607
This occurs because in C++11 the compound literal syntax can trigger a
constructor call via list-initialization. That is, "Point{x, y}" and
"(Point){x, y}" end up being equivalent. If this occurs, the inner
CXXConstructExpr will have already handled the object construction; the
CompoundLiteralExpr just needs to propagate that value forwards.
<rdar://problem/13804098>
llvm-svn: 181213
FindLastStoreBRVisitor is responsible for finding where a particular region
gets its value; if the region is a VarRegion, it's possible that value was
assigned at initialization, i.e. at its DeclStmt. However, if a function is
called recursively, the same DeclStmt may be evaluated multiple times in
multiple stack frames. FindLastStoreBRVisitor was not taking this into
account and just picking the first one it saw.
<rdar://problem/13787723>
llvm-svn: 180997
There were actually two bugs here:
- if we decided to look for an interesting lvalue or call expression, we
wouldn't go find its node if we also knew we were at a (different) call.
- if we looked through one message send with a nil receiver, we thought we
were still looking at an argument to the original call.
Put together, this kept us from being able to track the right values, which
means sub-par diagnostics and worse false-positive suppression.
Noticed by inspection.
llvm-svn: 180996
...and don't consider '0' to be a null pointer constant if it's the
initializer for a float!
Apparently null pointer constant evaluation looks through both
MaterializeTemporaryExpr and ImplicitCastExpr, so we have to be more
careful about types in the callers. For RegionStore this just means giving
up a little more; for ExprEngine this means handling the
MaterializeTemporaryExpr case explicitly.
Follow-up to r180894.
llvm-svn: 180944
It is unfortunate that we have to mark these exceptions in multiple places.
This was already in CallEvent. I suppose it does let us be more precise
about saying /which/ arguments have their retain counts invalidated -- the
connection's is still valid even though the context object's isn't -- but
we're not tracking the retain count of XPC objects anyway.
<rdar://problem/13783514>
llvm-svn: 180904
Previously, this was scattered across Environment (literal expressions),
ExprEngine (default arguments), and RegionStore (global constants). The
former special-cased several kinds of simple constant expressions, while
the latter two deferred to the AST's constant evaluator.
Now, these are all unified as SValBuilder::getConstantVal(). To keep
Environment fast, the special cases for simple constant expressions have
been left in, but the main benefits are that (a) unusual constants like
ObjCStringLiterals now work as default arguments and global constant
initializers, and (b) we're not duplicating code between ExprEngine and
RegionStore.
This actually caught a bug in our test suite, which is awesome: we stop
tracking allocated memory if it's passed as an argument along with some
kind of callback, but not if the callback is 0. We were testing this in
a case where the callback parameter had a default value, but that value
was 0. After this change, the analyzer now (correctly) flags that as a
leak!
<rdar://problem/13773117>
llvm-svn: 180894
This goes with r178516, which instructed the analyzer not to inline the
constructors and destructors of C++ container classes. This goes a step
further and does the same thing for iterators, so that the analyzer won't
falsely decide we're trying to construct an iterator pointing to a
nonexistent element.
The heuristic for determining whether something is an iterator is the
presence of an 'iterator_category' member. This is controlled under the
same -analyzer-config option as container constructor/destructor inlining:
'c++-container-inlining'.
<rdar://problem/13770187>
llvm-svn: 180890
This doesn't appear to be the cause of the slowdown. I'll have to try a
manual bisect to see if there's really anything there, or if it's just
the bot itself taking on additional load. Meanwhile, this change helps
with correctness.
This changes an assertion and adds a test case, then re-applies r180638,
which was reverted in r180714.
<rdar://problem/13296133> and PR15863
llvm-svn: 180864
This seems to be causing quite a slowdown on our internal analyzer bot,
and I'm not sure why. Needs further investigation.
This reverts r180638 / 9e161ea981f22ae017b6af09d660bfc3ddf16a09.
llvm-svn: 180714
In an Objective-C for-in loop "for (id element in collection) {}", the loop
will run 0 times if the collection is nil. This is because the for-in loop
is implemented using a protocol method that returns 0 when there are no
elements to iterate, and messages to nil will result in a 0 return value.
At some point we may want to actually model this message send, but for now
we may as well get the nil case correct, and avoid the false positives that
would come with this case.
<rdar://problem/13744632>
llvm-svn: 180639
Casts to bool (and _Bool) are equivalent to checks against zero,
not truncations to 1 bit or 8 bits.
This improved reasoning does cause a change in the behavior of the alpha
BoolAssignment checker. Previously, this checker complained about statements
like "bool x = y" if 'y' was known not to be 0 or 1. Now it does not, since
that conversion is well-defined. It's hard to say what the "best" behavior
here is: this conversion is safe, but might be better written as an explicit
comparison against zero.
More usefully, besides improving our model of booleans, this fixes spurious
warnings when returning the address of a local variable cast to bool.
<rdar://problem/13296133>
llvm-svn: 180638
We get a CallEnter with a null expression, when processing a destructor. All other users of
CallEnter::getCallExpr work fine with null as return value.
(Addresses PR15832, Thanks to Jordan for reducing the test case!)
llvm-svn: 180234
- If only partial invalidators exist and there are no full invalidators in @implementation, report every ivar that has
not been invalidated. (Previously, we reported the first Ivar in the list, which could actually have been invalidated
by a partial invalidator. The code assumed you cannot have only partial invalidators.)
- Do not report missing invalidation method declaration if a partial invalidation method declaration exists.
llvm-svn: 180170
The uniqueing location is the location which is part of the hash used to determine if two reports are
the same. This is used by the CmpRuns.py script to compare two analyzer runs and determine which
warnings are new.
llvm-svn: 180166
The 2 functions were computing the same location using different logic (each one had edge case bugs that the other
one did not). Refactor them to rely on the same logic.
The location of the warning reported in text/command line output format will now match that of the plist file.
There is one change in the plist output as well. When reporting an error on a BinaryOperator, we use the location of the
operator instead of the beginning of the BinaryOperator expression. This matches our output on command line and
looks better in most cases.
llvm-svn: 180165
The analyzer represents all pointer-to-pointer bitcasts the same way, but
this can be problematic if an implicit base cast gets layered on top of a
manual base cast (performed with reinterpret_cast instead of static_cast).
Fix this (and avoid a valid assertion) by looking through cast regions.
Using reinterpret_cast this way is only valid if the base class is at the
same offset as the derived class; this is checked by -Wreinterpret-base-class.
In the interest of performance, the analyzer doesn't repeat this check
anywhere; it will just silently do the wrong thing (use the wrong offsets
for fields of the base class) if the user code is wrong.
PR15394
llvm-svn: 180052
Introduce a new helper function, which computes the first symbolic region in
the base region chain. The corresponding symbol has been used for assuming that
a pointer is null. Now, it will also be used for checking if it is null.
This ensures that we are tracking a null pointer correctly in the BugReporter.
llvm-svn: 179916
The analyzer uses LazyCompoundVals to represent rvalues of aggregate types,
most importantly structs and arrays. This allows us to efficiently copy
around an entire struct, rather than doing a memberwise load every time a
struct rvalue is encountered. This can also keep memory usage down by
allowing several structs to "share" the same snapshotted bindings.
However, /lookup/ through LazyCompoundVals can be expensive, especially
since they can end up chaining back to the original value. While we try
to reuse LazyCompoundVals whenever it's safe, and cache information about
this transitivity, the fact is it's sometimes just not a good idea to
perpetuate LazyCompoundVals -- the tradeoffs just aren't worth it.
This commit changes RegionStore so that binding a LazyCompoundVal to struct
will do a memberwise copy if the struct is simple enough. Today's definition
of "simple enough" is "up to N scalar members" (see below), but that could
easily be changed in the future. This is enough to bring the test case in
PR15697 back down to a manageable analysis time (within 20% of its original
time, in an unfair test where the new analyzer is not compiled with LTO).
The actual value of "N" is controlled by a new -analyzer-config option,
'region-store-small-struct-limit'. It defaults to "2", meaning structs with
zero, one, or two scalar members will be considered "simple enough" for
this code path.
It's worth noting that a more straightforward implementation would do this
on load, not on bind, and make use of the structure we already have for this:
CompoundVal. A long time ago, this was actually how RegionStore modeled
aggregate-to-aggregate copies, but today it's only used for compound literals.
Unfortunately, it seems that we've special-cased LazyCompoundVal in certain
places (such as liveness checks) but failed to similarly special-case
CompoundVal in all of them. Until we're confident that CompoundVal is
handled properly everywhere, this solution is safer, since the entire
optimization is just an implementation detail of RegionStore.
<rdar://problem/13599304>
llvm-svn: 179767
A C++ overloaded operator may be implemented as an instance method, and
that instance method may be called on an rvalue object, which has no
associated region. The analyzer handles this by creating a temporary region
just for the evaluation of this call; however, it is possible that /by
creating the region/, the analyzer ends up in a previously-explored state.
In this case we don't need to continue along this path.
This doesn't actually show any behavioral change now, but it starts being
used with the next commit and prevents an assertion failure there.
llvm-svn: 179766
In the committed example, we now see a note that tells us when the pointer
was assumed to be null.
This is the only case in which getDerefExpr returned null (failed to get
the dereferenced expr) throughout our regression tests. (There were multiple
occurrences of this one.)
llvm-svn: 179736
We always register the visitor on a node in which the value we are tracking is live and constrained. However,
the visitation can restart at a node, later on the path, in which the value is under constrained because
it is no longer live. Previously, we just silently stopped tracking in that case.
llvm-svn: 179731
This was slightly tricky because BlockDecls don't currently store an
inferred return type. However, we can rely on the fact that blocks with
inferred return types will have return statements that match the inferred
type.
<rdar://problem/13665798>
llvm-svn: 179699
VerifyDiagnosticConsumer previously would not check that the diagnostic and
its matching directive referenced the same source file. Common practice was
to create directives that referenced other files but only by line number,
and this led to problems such as when the file containing the directive
didn't have enough lines to match the location of the diagnostic in the
other file, leading to bizarre file formatting and other oddities.
This patch causes VerifyDiagnosticConsumer to match source files as well as
line numbers. Therefore, a new syntax is made available for directives, for
example:
// expected-error@file:line {{diagnostic message}}
This extends the @line feature where "file" is the file where the diagnostic
is generated. The @line syntax is still available and uses the current file
for the diagnostic. "file" can be specified either as a relative or absolute
path - although the latter has less usefulness, I think! The #include search
paths will be used to locate the file and if it is not found an error will be
generated.
The new check is not optional: if the directive is in a different file to the
diagnostic, the file must be specified. Therefore, a number of test-cases
have been updated with regard to this.
This closes out PR15613.
llvm-svn: 179677
This is an opt-in tweak for leak diagnostics to reference the allocation
site if the diagnostic consumer only wants a pithy amount of information,
and not the entire path.
This is a strawman enhancement that I expect to see some experimentation
with over the next week, and can go away if we don't want it.
Currently it is only used by RetainCountChecker, but could be used
by MallocChecker if and when we decide this should stay in.
llvm-svn: 179634
When computing the value of ?: expression, we rely on the last expression in
the previous basic block to be the resulting value of the expression. This is
not the case for binary "?:" operator (GNU extension) in C++. As the last
basic block has the expression for the condition subexpression, which is an
R-value, whereas the true subexpression is the L-value.
Note the operator evaluation just happens to work in C since the true
subexpression is an R-value (like the condition subexpression). CFG is the
same in C and C++ case, but the AST nodes are different, which the LValue to
Rvalue conversion happening after the BinaryConditionalOperator evaluation.
Changed the logic to only use the last expression from the predecessor only
if it matches either true or false subexpression. Note, the logic needed
fortification anyway: L and R were passed but not even used by the function.
Also, change the conjureSymbolVal to correctly compute the type, when the
expression is an LG-value.
llvm-svn: 179574
Richard Smith