Summary:
G_GEP is rather poorly named. It's a simple pointer+scalar addition and
doesn't support any of the complexities of getelementptr. I therefore
propose that we rename it. There's a G_PTR_MASK so let's follow that
convention and go with G_PTR_ADD
Reviewers: volkan, aditya_nandakumar, bogner, rovka, arsenm
Subscribers: sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, arphaman, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69734
Select G_SEXT and G_ZEXT with destination types smaller than 32 bits in
the exact same way as 32 bits. This overwrites the higher bits, but that
should be ok since all legal users of types smaller than 32 bits ignore
those bits anyway.
llvm-svn: 359768
G_SELECT uses a 1-bit scalar for the condition, and is currently
implemented with a plain CMPri against 0. This means that values such as
0x1110 are interpreted as true, when instead the higher bits should be
treated as undefined and therefore ignored. Replace the CMPri with a
TSTri against 0x1, which performs an implicit AND, yielding the expected
result.
llvm-svn: 357153
This is exactly the same as arm mode, so for the instruction selector
tests we just extract them to a new file and run with the same checks
for both arm and thumb mode.
For the legalizer we need to update the tests for soft float a bit, but
only because BL and tBL are slightly different. We could be pedantic and
check that we get a well-formed BL for arm mode and a tBL for thumb, but
for the purposes of the legalizer test it's sufficient to just skip over
the predicate operands in the checks. Also note that we have the
pedantic checks in the divmod test, so we're covered.
llvm-svn: 354665
A number of of tests were using imm operands, not cimm. Since CSE
relies on the exact ConstantInt* pointer used, and implicit
conversions are generally evil, also enforce the bitsize of the types.
llvm-svn: 353113
Make it possible for TableGen to produce code for selecting MOVi32imm.
This allows reasonably recent ARM targets to select a lot more constants
than before.
We achieve this by adding GISelPredicateCode to arm_i32imm. It's
impossible to use the exact same code for both DAGISel and GlobalISel,
since one uses "Subtarget->" and the other "STI." to refer to the
subtarget. Moreover, in GlobalISel we don't have ready access to the
MachineFunction, so we need to add a bit of code for obtaining it from
the instruction that we're selecting. This is also the reason why it
needs to remain a PatLeaf instead of the more specific IntImmLeaf.
llvm-svn: 351056
As Roman Tereshin pointed out in https://reviews.llvm.org/D45541, the
-global-isel option is redundant when -run-pass is given. -global-isel sets up
the GlobalISel passes in the pass manager but -run-pass skips that entirely and
configures it's own pipeline.
llvm-svn: 331603
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
https://reviews.llvm.org/D42402
A lot of these copies are useless (copies b/w VRegs having the same
regclass) and should be cleaned up.
llvm-svn: 323291
Select G_PHI to PHI and manually constrain the result register. This is
very similar to how COPY is handled, so extract and reuse some of that
code.
llvm-svn: 321797
We used to handle G_CONSTANT with pointer type by forcing the type of
the result register to s32 and then letting TableGen handle it.
Unfortunately, setting the type only works for generic virtual
registers, that haven't yet been constrained to a register class (e.g.
those used only by a COPY later on). If the result register has already
been constrained as a use of a previously selected instruction, then
setting the type will assert.
It would be nice to be able to teach TableGen to select pointer
constants the same as integer constants, but since it's such an edge
case (at the moment the only pointer constant that we're generally
interested in is 0, and that is mostly used for comparisons and selects,
which are also not supported by TableGen) it's probably not worth the
effort right now. Instead, handle pointer constants with some trivial
handwritten code.
llvm-svn: 321793
Pointer constants are pretty rare, since we usually represent them as
integer constants and then cast to pointer. One notable exception is the
null pointer constant, which is represented directly as a G_CONSTANT 0
with pointer type. Mark it as legal and make sure it is selected like
any other integer constant.
llvm-svn: 321354
We get an assertion in RegBankSelect for code along the lines of
my_32_bit_int = my_64_bit_int, which tends to translate into a 64-bit
load, followed by a G_TRUNC, followed by a 32-bit store. This appears in
a couple of places in the test-suite.
At the moment, the legalizer doesn't distinguish between integer and
floating point scalars, so a 64-bit load will be marked as legal for
targets with VFP, and so will the rest of the sequence, leading to a
slightly bizarre G_TRUNC reaching RegBankSelect.
Since the current support for 64-bit integers is rather immature, this
patch works around the issue by explicitly handling this case in
RegBankSelect and InstructionSelect. In the future, we may want to
revisit this decision and make sure 64-bit integer loads are narrowed
before reaching RegBankSelect.
llvm-svn: 321165
output
As part of the unification of the debug format and the MIR format,
always use `printReg` to print all kinds of registers.
Updated the tests using '_' instead of '%noreg' until we decide which
one we want to be the default one.
Differential Revision: https://reviews.llvm.org/D40421
llvm-svn: 319445
When lowering a G_BRCOND, we generate a TSTri of the condition against
1, which sets the flags, and then a Bcc which branches based on the
value of the flags.
Unfortunately, we were using the wrong condition code to check whether
we need to branch (EQ instead of NE), which caused all our branches to
do the opposite of what they were intended to do. This patch fixes the
issue by using the correct condition code.
llvm-svn: 319313
TableGen already generates code for selecting a G_FDIV, so we only need
to add a test.
For the legalizer and reg bank select, we do the same thing as for the
other floating point binary operations: either mark as legal if we have
a FP unit or lower to a libcall, and map to the floating point
registers.
llvm-svn: 318915
TableGen already generates code for selecting a G_FMUL, so we only need
to add a test for that part.
For the legalizer and reg bank select, we do the same thing as the other
floating point binary operators: either mark as legal if we have a FP
unit or lower to a libcall, and map to the floating point registers.
llvm-svn: 318910
Add instruction selector test for RSBri, which is derived from
AsI1_rbin_irs, and make sure it doesn't get mistaken for SUBri, which is
derived from the very similar AsI1_bin_irs pattern.
llvm-svn: 318643
Remove some of the instruction selector tests for binary operators (and,
or, xor). These are all derived from the same kind of TableGen pattern,
AsI1_bin_irs, so there's no point in testing all of them.
llvm-svn: 318642
Get rid of the handwritten instruction selector code for handling
G_CONSTANT. This code wasn't checking all the preconditions correctly
anyway, so it's better to leave it to TableGen, which can handle at
least some cases correctly (e.g. MOVi, MOVi16, folding into binary
operations). Also add tests to cover those cases.
llvm-svn: 318146
This changes the interface of how targets describe how to legalize, see
the below description.
1. Interface for targets to describe how to legalize.
In GlobalISel, the API in the LegalizerInfo class is the main interface
for targets to specify which types are legal for which operations, and
what to do to turn illegal type/operation combinations into legal ones.
For each operation the type sizes that can be legalized without having
to change the size of the type are specified with a call to setAction.
This isn't different to how GlobalISel worked before. For example, for a
target that supports 32 and 64 bit adds natively:
for (auto Ty : {s32, s64})
setAction({G_ADD, 0, s32}, Legal);
or for a target that needs a library call for a 32 bit division:
setAction({G_SDIV, s32}, Libcall);
The main conceptual change to the LegalizerInfo API, is in specifying
how to legalize the type sizes for which a change of size is needed. For
example, in the above example, how to specify how all types from i1 to
i8388607 (apart from s32 and s64 which are legal) need to be legalized
and expressed in terms of operations on the available legal sizes
(again, i32 and i64 in this case). Before, the implementation only
allowed specifying power-of-2-sized types (e.g. setAction({G_ADD, 0,
s128}, NarrowScalar). A worse limitation was that if you'd wanted to
specify how to legalize all the sized types as allowed by the LLVM-IR
LangRef, i1 to i8388607, you'd have to call setAction 8388607-3 times
and probably would need a lot of memory to store all of these
specifications.
Instead, the legalization actions that need to change the size of the
type are specified now using a "SizeChangeStrategy". For example:
setLegalizeScalarToDifferentSizeStrategy(
G_ADD, 0, widenToLargerAndNarrowToLargest);
This example indicates that for type sizes for which there is a larger
size that can be legalized towards, do it by Widening the size.
For example, G_ADD on s17 will be legalized by first doing WidenScalar
to make it s32, after which it's legal.
The "NarrowToLargest" indicates what to do if there is no larger size
that can be legalized towards. E.g. G_ADD on s92 will be legalized by
doing NarrowScalar to s64.
Another example, taken from the ARM backend is:
for (unsigned Op : {G_SDIV, G_UDIV}) {
setLegalizeScalarToDifferentSizeStrategy(Op, 0,
widenToLargerTypesUnsupportedOtherwise);
if (ST.hasDivideInARMMode())
setAction({Op, s32}, Legal);
else
setAction({Op, s32}, Libcall);
}
For this example, G_SDIV on s8, on a target without a divide
instruction, would be legalized by first doing action (WidenScalar,
s32), followed by (Libcall, s32).
The same principle is also followed for when the number of vector lanes
on vector data types need to be changed, e.g.:
setAction({G_ADD, LLT::vector(8, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(16, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(8, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(2, 32)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 32)}, LegalizerInfo::Legal);
setLegalizeVectorElementToDifferentSizeStrategy(
G_ADD, 0, widenToLargerTypesUnsupportedOtherwise);
As currently implemented here, vector types are legalized by first
making the vector element size legal, followed by then making the number
of lanes legal. The strategy to follow in the first step is set by a
call to setLegalizeVectorElementToDifferentSizeStrategy, see example
above. The strategy followed in the second step
"moreToWiderTypesAndLessToWidest" (see code for its definition),
indicating that vectors are widened to more elements so they map to
natively supported vector widths, or when there isn't a legal wider
vector, split the vector to map it to the widest vector supported.
Therefore, for the above specification, some example legalizations are:
* getAction({G_ADD, LLT::vector(3, 3)})
returns {WidenScalar, LLT::vector(3, 8)}
* getAction({G_ADD, LLT::vector(3, 8)})
then returns {MoreElements, LLT::vector(8, 8)}
* getAction({G_ADD, LLT::vector(20, 8)})
returns {FewerElements, LLT::vector(16, 8)}
2. Key implementation aspects.
How to legalize a specific (operation, type index, size) tuple is
represented by mapping intervals of integers representing a range of
size types to an action to take, e.g.:
setScalarAction({G_ADD, LLT:scalar(1)},
{{1, WidenScalar}, // bit sizes [ 1, 31[
{32, Legal}, // bit sizes [32, 33[
{33, WidenScalar}, // bit sizes [33, 64[
{64, Legal}, // bit sizes [64, 65[
{65, NarrowScalar} // bit sizes [65, +inf[
});
Please note that most of the code to do the actual lowering of
non-power-of-2 sized types is currently missing, this is just trying to
make it possible for targets to specify what is legal, and how non-legal
types should be legalized. Probably quite a bit of further work is
needed in the actual legalizing and the other passes in GlobalISel to
support non-power-of-2 sized types.
I hope the documentation in LegalizerInfo.h and the examples provided in the
various {Target}LegalizerInfo.cpp and LegalizerInfoTest.cpp explains well
enough how this is meant to be used.
This drops the need for LLT::{half,double}...Size().
Differential Revision: https://reviews.llvm.org/D30529
llvm-svn: 317560
This updates the MIRPrinter to include the regclass when printing
virtual register defs, which is already valid syntax for the
parser. That is, given 64 bit %0 and %1 in a "gpr" regbank,
%1(s64) = COPY %0(s64)
would now be written as
%1:gpr(s64) = COPY %0(s64)
While this change alone introduces a bit of redundancy with the
registers block, it allows us to update the tests to be more concise
and understandable and brings us closer to being able to remove the
registers block completely.
Note: We generally only print the class in defs, but there is one
exception. If there are uses without any defs whatsoever, we'll print
the class on all uses. I'm not completely convinced this comes up in
meaningful machine IR, but for now the MIRParser and MachineVerifier
both accept that kind of stuff, so we don't want to have a situation
where we can print something we can't parse.
llvm-svn: 316479
This is in preparation for a verifier check that makes sure
copies are of the same size (when generic virtual registers are involved).
llvm-svn: 316388
Unfortunately TableGen doesn't handle this yet:
Unable to deduce gMIR opcode to handle Src (which is a leaf).
Just add some temporary hand-written code to generate the proper MOVsr.
llvm-svn: 315071
Insert a TSTri to set the flags and a Bcc to branch based on their
values. This is a bit inefficient in the (common) cases where the
condition for the branch comes from a compare right before the branch,
since we set the flags both as part of the compare lowering and as part
of the branch lowering. We're going to live with that until we settle on
a principled way to handle this kind of situation, which occurs with
other patterns as well (combines might be the way forward here).
llvm-svn: 308009
This boils down to not crashing in reg bank select due to the lack of
register operands on this instruction, and adding some tests. The
instruction selection is already covered by the TableGen'erated code.
llvm-svn: 307904
* Mark as legal for (s32, i1, s32, s32)
* Map everything into GPRs
* Select to two instructions: a CMP of the condition against 0, to set
the flags, and a MOVCCr to select between the two inputs based on the
flags that we've just set
llvm-svn: 306382
According to the commit message from r296921, G_MERGE_VALUES and
G_INSERT are to be preferred over G_SEQUENCE. Therefore, stop generating
G_SEQUENCE in the ARM backend and remove the code dealing with it.
This boils down to the code breaking up double values for the soft float
calling convention. Use G_MERGE_VALUES + G_UNMERGE_VALUES instead of
G_SEQUENCE + G_EXTRACT for it. This maps very nicely to VMOVDRR +
VMOVRRD and simplifies the code in the instruction selector.
There's one occurence of G_SEQUENCE left in arm-irtranslator.ll, but
that is part of the target-independent code for translating constant
structs. Therefore, it is beyond the scope of this commit.
llvm-svn: 304902
This is identical to the support for the other binary operators:
- widen to s32
- map into GPR
- select ANDrr (via TableGen'erated code)
llvm-svn: 304885
If -simplify-mir option is passed then MIRPrinter will not print such fields.
This change also required some lit test cases in CodeGen directory to be changed.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D32304
llvm-svn: 304779
This is the same as r292827 for AArch64: we widen 8- and 16-bit ADD, SUB
and MUL to 32 bits since we only have TableGen patterns for 32 bits.
See the commit message for r292827 for more details.
At this point we could just remove some of the tests for regbankselect
and instruction-select, since we're not going to see any narrow
operations at those levels anymore. Instead I decided to update them
with G_ANYEXT/G_TRUNC operations, so we can validate the full sequences
generated by the legalizer.
llvm-svn: 302782
G_ANYEXT can be introduced by the legalizer when widening scalars. Add
support for it in the register bank info (same mapping as everything
else) and in the instruction selector.
When selecting it, we treat it as a COPY, just like G_TRUNC. On this
occasion we get rid of some assertions in selectCopy so we can reuse it.
This shouldn't be a problem at the moment since we're not supporting any
complicated cases (e.g. FPR, different register banks). We might want to
separate the paths when we do.
llvm-svn: 302778
Add support for both targets with hardware division and without. For
hardware division we have to add support throughout the pipeline
(legalizer, reg bank select, instruction select). For targets without
hardware division, we only need to mark it as a libcall.
llvm-svn: 301164
When selecting a G_CONSTANT to a MOVi, we need the value to be an Imm
operand. We used to just leave the G_CONSTANT operand unchanged, which
works in some cases (such as the GEP offsets that we create when
referring to stack slots). However, in many other places the G_CONSTANTs
are created with CImm operands. This patch makes sure to handle those as
well, and to error out gracefully if in the end we don't end up with an
Imm operand.
Thanks to Oliver Stannard for reporting this issue.
llvm-svn: 301162
Daniel Sanders