This is a more principled approach to disabling Spotlight .dSYM
lookups while running the testsuite, most importantly it also works
for the LIT-based tests, which I overlooked in my initial fix
(renaming the test build dir to lldb-tests.noindex).
Differential Revision: https://reviews.llvm.org/D44342
llvm-svn: 327330
This reverts commit r327318. It breaks the Xcode and CMake Darwin
builders:
clang: error: no such file or directory:
'.../source/Plugins/Architecture/PPC64/ArchitecturePPC64.cpp'
clang: error: no input files
More details are in https://reviews.llvm.org/D42582.
llvm-svn: 327327
Summary:
The command takes two input arguments: a module to use as a debug target
and a file containing a list of commands. The command will execute each
of the breakpoint commands in the file and dump the breakpoint state
after each one.
The commands are expected to be breakpoint set/remove/etc. commands, but
I explicitly allow any lldb command here, so you can do things like
change setting which impact breakpoint resolution, etc. There is also a
"-persistent" flag, which causes lldb-test to *not* automatically clear
the breakpoint list after each command. Right now I don't use it, but
the idea behind it was that it could be used to test more complex
combinations of breakpoint commands (set+modify, set+disable, etc.).
Right now the command prints out only the basic breakpoint state, but
more information can be easily added there. To enable easy matching of
the "at least one breakpoint location found" state, the command
explicitly prints out the string "At least one breakpoint location.".
To enable testing of breakpoints set with an absolute paths, I add the
ability to perform rudimentary substitutions on the commands: right now
the string %p is replaced by the directory which contains the command
file (so, under normal circumstances, this will perform the same
substitution as lit would do for %p).
I use this command to rewrite the TestBreakpointCaseSensitivity test --
the test was checking about a dozen breakpoint commands, but it was
launching a new process for each one, so it took about 90 seconds to
run. The new test takes about 0.3 seconds for me, which is approximately
a 300x speedup.
Reviewers: davide, zturner, jingham
Subscribers: luporl, lldb-commits
Differential Revision: https://reviews.llvm.org/D43686
llvm-svn: 326112
Use full PATH when looking up test tools rather than just llvm tools
directory. r320813 has added a lookup for 'lldb-test' which is part
of LLDB tools rather than LLVM, and therefore is not present
in llvm_tools_dir before LLDB is installed.
While technically we could introduce separate per-directory lookup
logic, there is no real reason not to use the PATH formed earlier here,
and this is what other tools are doing.
Differential Revision: https://reviews.llvm.org/D41726
llvm-svn: 321932
Summary:
We use the llvm decompressor to decompress SHF_COMPRESSED sections. This enables
us to read data from debug info sections, which are sometimes compressed,
particuarly in the split-dwarf case. This functionality is only available if
llvm is compiled with zlib support.
Reviewers: clayborg, zturner
Subscribers: emaste, mgorny, aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D40616
llvm-svn: 320813
This is a resubmission of r313270. It broke standalone builds of
compiler-rt because we were not correctly generating the llvm-lit
script in the standalone build directory.
The fixes incorporated here attempt to find llvm/utils/llvm-lit
from the source tree returned by llvm-config. If present, it
will generate llvm-lit into the output directory. Regardless,
the user can specify -DLLVM_EXTERNAL_LIT to point to a specific
lit.py on their file system. This supports the use case of
someone installing lit via a package manager. If it cannot find
a source tree, and -DLLVM_EXTERNAL_LIT is either unspecified or
invalid, then we print a warning that tests will not be able
to run.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313407
This patch is still breaking several multi-stage compiler-rt bots.
I already know what the fix is, but I want to get the bots green
for now and then try re-applying in the morning.
llvm-svn: 313335
This patch simplifies LLVM's lit infrastructure by enforcing an ordering
that a site config is always run before a source-tree config.
A significant amount of the complexity from lit config files arises from
the fact that inside of a source-tree config file, we don't yet know if
the site config has been run. However it is *always* required to run
a site config first, because it passes various variables down through
CMake that the main config depends on. As a result, every config
file has to do a bunch of magic to try to reverse-engineer the location
of the site config file if they detect (heuristically) that the site
config file has not yet been run.
This patch solves the problem by emitting a mapping from source tree
config file to binary tree site config file in llvm-lit.py. Then, during
discovery when we find a config file, we check to see if we have a
target mapping for it, and if so we use that instead.
This mechanism is generic enough that it does not affect external users
of lit. They will just not have a config mapping defined, and everything
will work as normal.
On the other hand, for us it allows us to make many simplifications:
* We are guaranteed that a site config will be executed first
* Inside of a main config, we no longer have to assume that attributes
might not be present and use getattr everywhere.
* We no longer have to pass parameters such as --param llvm_site_config=<path>
on the command line.
* It is future-proof, meaning you don't have to edit llvm-lit.in to add
support for new projects.
* All of the duplicated logic of trying various fallback mechanisms of
finding a site config from the main config are now gone.
One potentially noteworthy thing that was required to implement this
change is that whereas the ninja check targets previously used the first
method to spawn lit, they now use the second. In particular, you can no
longer run lit.py against the source tree while specifying the various
`foo_site_config=<path>` parameters. Instead, you need to run
llvm-lit.py.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313270
Summary:
The capture() function was removed in r306625. This should fix PGO breakages
reported by Michael Zolotukhin.
Reviewers: mzolotukhin
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D35088
llvm-svn: 307320
Use both LLDB- and LLVM-specific tool/library directories when LLDB is
being built stand-alone. This ensures that the freshly-built tools
(and libraries) are used correctly.
Without this patch, the test suite uses LLVM_TOOLS_DIR and LLVM_LIBS_DIR
to locate lldb, and set PATH and LD_LIBRARY_PATH. When doing
a stand-alone build, these variables represent the installed LLVM.
As a result, tests either fail due to missing lldb executable
or use an earlier installed LLDB version rather than the one being
built.
To solve this, additional LLDB_TOOLS_DIR and LLDB_LIBS_DIR variables
are added and populated using LLVM_*_OUTPUT_INTDIR. Those variables
contain directories used to output built executables and libraries.
In stand-alone builds, they represent the build-tree directories
used by LLDB. In integrated builds, they have the same values as
LLVM_*_DIR and therefore using them does not harm.
The new variables are prepended to PATH and LD_LIBRARY_PATH to ensure
that freshly built binaries are preferred over potentially earlier
installed ones. Furthermore, paths used to locate various tools are
updated to match appropriate locations.
Differential Revision: https://reviews.llvm.org/D29985
llvm-svn: 295621
On Linux, there is no "debugserver" process, and the RUN-line substitution will
fail if you try to substitute '%debugserver' with None.
Fixes PR30492.
llvm-svn: 283520
Summary:
This patch supplies basic infrastructure for LLDB to use LIT, and ports a few basic test cases from the LLDB test suite into LIT.
With this patch the LLDB lit system is not capable or intended to fully replace the existing LLDB test suite, but this first patch enables people to write lit tests for LLDB.
The lit substitution for %cc and %cxx default to the host compiler unless the CMake option LLDB_TEST_CLANG is On, in which case the in-tree clang will be used.
The target check-lldb-lit will run all lit tests including the lit-based executor for the unit tests. Alternatively there is a target generated for each subdirectory under the lit directory, so check-lldb-unit and check-lldb-expr will run just the tests under their respective directories.
The ported tests are not removed from the existing suite, and should not be until such a time when the lit runner is mature and in use by bots and workflows.
Reviewers: zturner, labath, jingham, tfiala
Subscribers: beanz, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D24591
llvm-svn: 281651
Jim Ingham