Previously we checked (HeaderSize == 0) to find out if
PltSection section is IPLT or PLT. Some targets does not set
HeaderSize though. For example PPC64 has no lazy binding implemented
and does not set PltHeaderSize constant.
Because of that using of both IPLT and PLT relocations worked
incorrectly there (testcase is provided).
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D41613
llvm-svn: 322362
Currently LLVM's paralellForEach has a problem with reentracy.
That caused https://bugs.llvm.org/show_bug.cgi?id=35788 (lld somtimes
hangs while linking Ruby 2.4) because maybeCompress calls writeTo which
uses paralellForEach.
This patch is to avoid using paralellForEach to call maybeCompress
to workaround the issue.
llvm-svn: 322041
Previously, in r320472, I moved the calculation of section offsets and sizes
for compressed debug sections into maybeCompress, which happens before
assignAddresses, so that the compression had the required information. However,
I failed to take account of relocations that patch such sections. This had two
effects:
1. A race condition existed when a debug section referred to a different debug
section (see PR35788).
2. References to symbols in non-debug sections would be patched incorrectly.
This is because the addresses of such symbols are not calculated until after
assignAddresses (this was a partial regression caused by r320472, but they
could still have been broken before, in the event that a custom layout was used
in a linker script).
assignAddresses does not need to know about the output section size of
non-allocatable sections, because they do not affect the value of Dot. This
means that there is no longer a reason not to support custom layout of
compressed debug sections, as far as I'm aware. These two points allow for
delaying when maybeCompress can be called, removing the need for the loop I
previously added to calculate the section size, and therefore the race
condition. Furthermore, by delaying, we fix the issues of relocations getting
incorrect symbol values, because they have now all been finalized.
llvm-svn: 321986
We normally want to ignore SHT_NOBITS sections when computing
offsets. The sh_offset of section itself seems to be irrelevant and
- If the section is in the middle of a PT_LOAD, it will make no
difference on the computed offset of the followup section.
- If it is in the end of a PT_LOAD, we want to avoid its alignment
changing the offset of the followup sections.
The issue is if it is at the start of the PT_LOAD. In that case we do
have to align it so that the following sections have congruent address
and offset module the page size. We were not handling this case.
This should fix freebsd kernel link.
llvm-svn: 321657
We normally avoid "switch (Config->EKind)", but in this case I think
it is worth it.
It is only executed when there is an error and it allows detemplating
a lot of code.
llvm-svn: 321404
The ARM.exidx section contains a table of 8-byte entries with the first
word of each entry an offset to the function it describes and the second
word instructions for unwinding if an exception is thrown from that
function. The SHF_LINK_ORDER processing will order the table in ascending
order of the functions described by the exception table entries. As the
address range of an exception table entry is terminated by the next table
entry, it is possible to merge consecutive table entries that have
identical unwind instructions.
For this implementation we define a table entry to be identical if:
- Both entries are the special EXIDX_CANTUNWIND.
- Both entries have the same inline unwind instructions.
We do not attempt to establish if table entries that are references to
.ARM.extab sections are identical.
This implementation works at a granularity of a single .ARM.exidx
InputSection. If all entries in the InputSection are identical to the
previous table entry we can remove the InputSection. A more sophisticated
but more complex implementation would rewrite InputSection contents so that
duplicates within a .ARM.exidx InputSection can be merged.
Differential Revision: https://reviews.llvm.org/D40967
llvm-svn: 320803
This patch provides the mechanism to fix instances of the instruction
sequence that may trigger the cortex-a53 843419 erratum. The fix is
provided by an alternative instruction sequence to remove one of the
erratum conditions. To reach this alternative instruction sequence we
replace the original instruction with a branch to the alternative
sequence. The alternative sequence is responsible for branching back to
the original.
As there is only erratum to fix the implementation is specific to
AArch64 and the specific erratum conditions. It should be generalizable
to other targets and erratum if needed.
Differential Revision: https://reviews.llvm.org/D36749
llvm-svn: 320800
It is currently in InputSectionBase. Only InputSections are used in
ICF, so Repl should be move to InputSection to clear the class
hierarchy or, like this patch does, to SectionBase for convenience.
The convenience of having it on the base class is that we can just
access the replacement without having to first check if it is an
InputSection. It is a bit less code and a bit faster as some of this
code is very hot.
I got up to 1.77% improvement in clang-gdb-index and no regressions
according to lnt.
llvm-svn: 320654
By moving this step before thunk creation and other processing that depends
on the size of sections, we permit removal of duplicates in the .ARM.exidx
section.
Differential Revision: https://reviews.llvm.org/D40964
llvm-svn: 320477
This fixes pr35570.
We were creating these symbols after parsing version scripts, so they
could not be versioned.
We cannot move the version script parsing later because we need it for
lto.
One option is to move both addReservedSymbols and
createSyntheticSections earlier. The disadvantage is that some
sections created by createSyntheticSections replace other input
sections. For example, gdb index replaces .debug_gnu_pubnames, so it
wants to run after gc sections so that it can set S->Live to false.
What this patch does instead is to move just the ElfHeader creation
early.
llvm-svn: 320390
Add a new file AArch64ErrataFix.cpp that implements the logic to scan for
the Cortex-A53 Erratum 843419. This involves finding all the executable
code, disassembling the instructions that might trigger the erratum and
reporting a message if the sequence is detected.
At this stage we do not attempt to fix the erratum, this functionality
will be added in a later patch. See D36749 for proposal.
Differential Revision: https://reviews.llvm.org/D36742
llvm-svn: 319780
When a linker script is used with a pattern like { *(.bss .bss.*) } the
InX::BssRelRo section will match against .bss.*. By matching on the name
only, in the same way that .data.rel.ro works we prevent this
from happening, but permit scripts that want to explicitly provide
a .bss.rel.ro OutputSection.
Differential Revision: https://reviews.llvm.org/D40735
llvm-svn: 319755
PR35478 https://bugs.llvm.org/show_bug.cgi?id=35478 points out a flaw
in the implementation of r318924 from D40364. The implementation
depends on the Size field being set or the SyntheticSection::empty()
being accurate. These functions are not reliable as some linker script
commands that have yet to be processed may affect the results, causing
some non-zero size sections to be reported as zero size.
I think the first step is to revert r318924 and come up with a better
solution for the underlying problem rather than trying to layer more
heuristics onto the zero sized output section.
Chances are I'll be out of office by the time anyone sees this so feel
free to commit the revert if you agree with me.
Fixes PR35478
Current thoughts on the underlying problem:
Revisiting the motivation for adding the zero size check in the first
place; it was to prevent 0 sized SyntheticSections that a user does
not have full control over from needlessly breaking the PT_GNU_RELRO,
rather than trying to accommodate arbitrarily complex linker
scripts. Looking at the code, it looks like
removeUnusedSyntheticSections() should remove zero sized synthetic
sections. It does, but it doesn't set the Parent to nullptr, this has
the side effect that Sec == InX::BssRelRo->getParent() will make the
parent OutputSection of InX::BssRelRo RelRo even if there is no
InX::BssRelRo.
I tried a quick experiment with setting the Parent to nullptr and this
flushed out a few interesting test failures, it feels like playing
Jenga with every change:
In the isRelroSection() we have to consider the case where there
is no .plt and .plt.got but there is a ifunc plt with accompanying
(ifunc .got or .plt.got)
The PPC64 has PltHeaderSize == 0. Unfortunately HeaderSize == 0 is
used to choose between the ifunc plt or normal plt. We seem to get
away with this at the moment, but tests start to fail when Parent
is set to nullptr for the .got.plt.
The InX::BssRelRo and InX::Bss never get their sizes set and they
are always removed by removeUnusedSyntheticSections(), their
purpose seems to be as some kind of proxy for add .bss or
.bss.relro InputSections into their parent OutputSections, they
therefore don't behave like other SyntheticSections anyway.
My thinking is that some work is needed to make sure that the Sec ==
SyntheticSection->getParent() does a bit more checking before
returning true, particularly for InX::BssRelRo as that has special
behaviour. I'll hope to post something for review as soon as possible.
Patch by Peter Smith!
llvm-svn: 319563
This is for "Bug 35474 - --emit-relocs produces wrongly-named reloc sections".
LLD currently for scripts like:
.text.boot : { *(.text.boot) }
emits relocation section with name .rela.text because does not take
redefined name of output section into account and builds section name
using rules for non-scripted case. Patch fixes this oddness.
Differential revision: https://reviews.llvm.org/D40652
llvm-svn: 319526
This includes a fix to mark copy reloc aliases as used.
Original message:
[ELF] Do not keep symbols if they referenced only from discarded sections.
This patch also ensures that in case of "--as-needed" is used,
DT_NEEDED entries are not created if they are required only by
these eliminated symbols.
llvm-svn: 319215
This patch also ensures that in case of "--as-needed" is used,
DT_NEEDED entries are not created if they are required only by
these eliminated symbols.
Differential Revision: https://reviews.llvm.org/D38790
llvm-svn: 319008
LLD uses .bss.rel.ro for read-only copy relocations whereas the ld.bfd and
gold linkers use .data.rel.ro. In some linker scripts including ld.bfd's
internal linker script, the relro sections are placed sequentially assuming
.data.rel.ro is used. LLD's use of .bss.rel.ro means that the copy
relocations get matched into the .bss section causing the relro sections to
be non-contiguous.
This change checks for a .data.rel.ro OutputSection when a linker script
with the SECTIONS command is used. The section will match in the
.data.rel.ro output section and will maintain contiguous relro.
Differential Revision: https://reviews.llvm.org/D40365
Fixes PR35265
llvm-svn: 318940
When checking for contiguous relro sections we can skip over empty sections.
If there is an empty non-relro section in the middle of a contiguous block
of relro sections then it cannot be written to so it is safe to include in
PT_GNU_RELRO header. If there is a contiguous block of empty relro sections
then no PT_GNU_RELRO header is required for them.
Differential Revision: https://reviews.llvm.org/D40364
llvm-svn: 318924
If a linker script is used that names linker generated synthetic sections
it is possible that the OutputSections for which isRelroSection() is true
are not contiguous. When the relro sections are not contiguous we cannot
describe them with a single PT_GNU_RELRO PHDR. Unfortunately at least one
contemporary dynamic loader only supports one PT_GNU_RELRO PHDR so we
cannot output more than one of these PHDRs. As not including relro
sections in the PHDR will lead to security sensitive sections being
writeable we choose to give an error message instead.
Differential Revision: https://reviews.llvm.org/D40359
[ELF] Skip over empty sections when checking for contiguous relro
llvm-svn: 318920
This fixes PR35223.
Here I enabled SHF_MERGE section content merging for -r like
we do for regular linking.
Differential revision: https://reviews.llvm.org/D40026
llvm-svn: 318516
Previously our relocations we rewrote were broken for that case.
We emited incorrect addend and broken relocation info field
because did not produce section symbol for mergeable synthetic sections.
Differential revision: https://reviews.llvm.org/D40070
llvm-svn: 318394
It is really hard to cover restarts in a debugger, SIGKILL or power
failures. I will try to handle them in a followup patch, but it will
not support all the systems lld has to run on.
RemoveFileOnSignal takes care of crashes.
So what is left is making sure all regular exits delete the file. This
patch does that by moving the buffer to error handling. That is a bit
of a hack, but seemed better than to generalize it to take a callback on
construction.
I will implement this on COFF on the next patch.
llvm-svn: 318060
Now that DefinedRegular is the only remaining derived class of
Defined, we can merge the two classes.
Differential Revision: https://reviews.llvm.org/D39667
llvm-svn: 317448
That class is used only by LinkerScript.cpp, so we should move it to
that file. Also, it no longer has to be a "factory" class. It can just
be a non-member function.
llvm-svn: 317427
Now that we have only SymbolBody as the symbol class. So, "SymbolBody"
is a bit strange name now. This is a mechanical change generated by
perl -i -pe s/SymbolBody/Symbol/g $(git grep -l SymbolBody lld/ELF lld/COFF)
nd clang-format-diff.
Differential Revision: https://reviews.llvm.org/D39459
llvm-svn: 317370
StringTableSection does not implement postThunkContents, so calling it on these
sections is pointless (it calls an empty virtual function), and we can remove it.
Reviewers: ruiu
Differential Revision: https://reviews.llvm.org/D39460
llvm-svn: 317014
SymbolBody and Symbol were separated classes due to a historical reason.
Symbol used to be a pointer to a SymbolBody, and the relationship
between Symbol and SymbolBody was n:1.
r2681780 changed that. Since that patch, SymbolBody and Symbol are
allocated next to each other to improve memory locality, and they have
1:1 relationship now. So, the separation of Symbol and SymbolBody no
longer makes sense.
This patch merges them into one class. In order to avoid updating too
many places, I chose SymbolBody as a unified name. I'll rename it Symbol
in a follow-up patch.
Differential Revision: https://reviews.llvm.org/D39406
llvm-svn: 317006
When there is no SECTION commands given, all sections are
technically orphans, but now we handle script orphans sections
and regular "orphans" sections for non-scripted case differently,
though we can handle them at one place.
Patch do that change.
Differential revision: https://reviews.llvm.org/D39045
llvm-svn: 316984
It does not seem that createSections() is a good place for
applying sorting. Patch changes code to do that inside
sortSections(), which looks more appropriate place.
Differential revision: https://reviews.llvm.org/D39371
llvm-svn: 316893
edata needs to be set to the end of the last mapped initialized
section. We were previously mishandling the case where there were no
non-mapped sections by setting it to the end of the last section in
the output file.
Differential Revision: https://reviews.llvm.org/D39399
llvm-svn: 316877
DSO is short for dynamic shared object, so the function name was a
little confusing because it sounded like it didn't work when we were
a creating statically-linked executable or something.
What we mean by "DSO" here is the current output file that we are
creating. Thus the new name. Alternatively, we could call it the current
ELF module, but "module" is a overloaded word, so I avoided that.
llvm-svn: 316809
The Android relocation packing format is a more compact
format for dynamic relocations in executables and DSOs
that is based on delta encoding and SLEBs. An overview
of the format can be found in the Android source code:
https://android.googlesource.com/platform/bionic/+/refs/heads/master/tools/relocation_packer/src/delta_encoder.h
This patch implements relocation packing using that format.
This implementation uses a more intelligent algorithm for compressing
relative relocations than Android's own relocation packer. As a
result it can generally create smaller relocation sections than
that packer. If I link Chromium for Android targeting ARM32 I get a
.rel.dyn of size 174693 bytes, as compared to 371832 bytes with gold
and the Android packer.
Differential Revision: https://reviews.llvm.org/D39152
llvm-svn: 316775
It was reported (https://reviews.llvm.org/D38724#902841) that when we use
-ffunction-sections --emit-relocs build, REL[A] output section receives the name of first
input section, like .rela.text.first_function_in_text rather than .rela.text.
It is probably not really an issue as sh_info still points to correct target section, but
it does not look clean in output and allows internal section name to leak there,
what at least looks confusing and is not consistent with ld.bfd.
Patch changes this behavior so that target output section name is used as a base.
Differential revision: https://reviews.llvm.org/D39242
llvm-svn: 316760
This moves reporting of garbage collected sections right after
we do GC. That simplifies things.
Differential revision: https://reviews.llvm.org/D39058
llvm-svn: 316759
This change allows Thunks to be added on multiple passes. To do this we must
merge only the thunks added in each pass, and deal with thunks that have
drifted out of range of their callers.
A thunk may end out of range of its caller if enough thunks are added in
between the caller and the thunk. To handle this we create another thunk.
Differential Revision: https://reviews.llvm.org/D34692
llvm-svn: 316754
This change adds initial support for range extension thunks. All thunks must
be created within the first pass so some corner cases are not supported. A
follow up patch will add support for multiple passes.
With this change the existing tests arm-branch-error.s and
arm-thumb-branch-error.s now no longer fail with an out of range branch.
These have been renamed and tests added for the range extension thunk.
Differential Revision: https://reviews.llvm.org/D34691
llvm-svn: 316752
Summary:
The COFF linker and the ELF linker have long had similar but separate
Error.h and Error.cpp files to implement error handling. This change
introduces new error handling code in Common/ErrorHandler.h, changes the
COFF and ELF linkers to use it, and removes the old, separate
implementations.
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: smeenai, jyknight, emaste, sdardis, nemanjai, nhaehnle, mgorny, javed.absar, kbarton, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D39259
llvm-svn: 316624
r315292 introduced a change that's supposed to consistently ignore
"dead" output sections when placing orphans. Unfortunately, that
change doesn't handle the special case when the orphan section is
second to last section and the last section is dead (e.g. because
it's being discarded) introducing a regression in some cases.
This change handles this case by using the same predicate when
checking the last section.
Differential Revision: https://reviews.llvm.org/D39172
llvm-svn: 316307
Summary:
This will allow using the functionality from other linkers. It is also
a prerequisite for sharing the error logging code.
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: emaste, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D38822
llvm-svn: 315725
"Commands" was ambiguous because in the linker script, everything is
a command. We used to handle only SECTIONS commands, and at the time,
it might make sense to call them the commands, but it is no longer
the case. We handle not only SECTIONS but also MEMORY, PHDRS, VERSION,
etc., and they are all commands.
llvm-svn: 315409
HasSections is true if there is at least one SECTIONS linker
script command, and it is not directly related to whether we have
section objects or not. So I think the new name is better.
llvm-svn: 315405
ScriptConfiguration was a class to contain parsed results of
linker scripts. LinkerScript is a class to interpret it.
That ditinction was needed because we haven't instantiated
LinkerScript early (because, IIRC, LinkerScript class was a
ELFT template function). So, when we parse linker scripts,
we couldn't directly store the result to a LinkerScript instance.
Now, that limitation is gone. We instantiate LinkerScript
at the very beginning of our main function. We can directly
store parse results to a LinkerScript instance.
llvm-svn: 315403
We just don't need one with the current setup.
We only error on undefined references that are used by some
relocation.
If we managed to relax all uses of __tls_get_addr, no relocation uses
it and we don't produce an error.
This is less code and fixes the case were we fail to relax. Before we
would produce a broken output, but now we produce an error.
llvm-svn: 315334
When findOrphanPos does the reverse search to find the OutputSection
preceding the orphan's insertion point, look for a live OutputSection
and ignore "dead" OutputSection's. This matches the behaviour of the
forward search performed earlier in this function.
Added test which without the above fix fails as a result of an orphan
executable section being incorrectly placed in a non-executable segment.
Differential Review: https://reviews.llvm.org/D38690
llvm-svn: 315292
Factory::addInputSec added an output section to Script->Opt.Commands,
but that is too subtle. This patch makes it explicit so that it is easy
to see when a new element is added to Script->Opt.Commands.
llvm-svn: 315129
addSection function was hard to read because it behaves differently
depending on its arguments but what exactly it does is not clear.
Now it should be better. Still, it is not clear (not what but) why
it does what it does, but I'll take a look at it later.
llvm-svn: 315124
This reverts commit r314616 because nested parallel-for loops can hang.
Our ThreadPoolExecutor is not necessarily able to handle nested calls.
llvm-svn: 315098
We used to call exitLld() from a leaf function, Writer::run(), because
we had objects on the stack whose dtors are expensive. Now we no longer
have such objects on the stack, so there's no reason to exist from the
leaf function.
llvm-svn: 314869
Currently LLD calls the `isMicroMips` routine to determine type of PLT entries
needs to be generated: regular or microMIPS. This routine checks ELF
header flags in the `FirstObj` to retrieve type of linked object files.
So if the first file does not contain microMIPS code, LLD will generate
PLT entries with regular (non-microMIPS) code only.
Ideally, if a PLT entry is referenced by microMIPS code only this entry
should contain microMIPS code, if a PLT entry is referenced by regular
code this entry should contain regular code. In a "mixed" case the PLT
entry can be either microMIPS or regular, but each "cross-mode-call" has
additional cost.
It's rather difficult to implement this ideal solution. But we can
assume that if there is an input object file with microMIPS code, the
most part of the code is microMIPS too. So we need to deduce type of PLT
entries based on finally calculated ELF header flags and do not check
only the first input object file.
This change implements this.
- The `getMipsEFlags` renamed to the `calcMipsEFlags`. The function
called from the `LinkerDriver::link`. Result is stored in
the Configuration::MipsEFlags field.
- The `isMicroMips` and `isMipsR6` routines access the `MipsEFlags`
field to get and check calculated ELF flags.
- New types of PLT records created when necessary.
Differential revision: https://reviews.llvm.org/D37747
llvm-svn: 314675
That makes code a bit more consistent. Instead of removing sections there
we can just mark them as dead. So that removeEmptyCommands() will
handle the rest.
Differential revision: https://reviews.llvm.org/D38393
llvm-svn: 314654
I don't know why we didn't use parallelForEach to call writeTo,
but there should be no reason to not do that, as most writeTo
functions are safe to run concurrently.
llvm-svn: 314616
Convert all common symbols to regular symbols after scan.
This means that the downstream code does not to handle common symbols as a special case.
Differential Revision: https://reviews.llvm.org/D38137
llvm-svn: 314495
Previously`InX::Got` and InX::MipsGot synthetic sections
were not removed if ElfSym::GlobalOffsetTable was defined.
ElfSym::GlobalOffsetTable is a symbol for _GLOBAL_OFFSET_TABLE_.
Patch moves ElfSym::GlobalOffsetTable check out from removeUnusedSyntheticSections.
Also note that there was no point to check ElfSym::GlobalOffsetTable for MIPS case
because InX::MipsGot::empty() always returns false for non-relocatable case, and in case
of relocatable output we do not create special symbols anyways.
Differential revision: https://reviews.llvm.org/D37623
llvm-svn: 314099
The previous logic was to try to detect if a linker script defined _gp
by checking !ElfSym::MipsGp->Value. That doesn't work in all cases as
the assigned value can be 0.
We now just always defined it Writer.cpp and always overwrite it
afterwards if needed.
llvm-svn: 313788
Given a linker script that ends in
.some_sec { ...} ;
__stack_start = .;
. = . + 0x2000;
__stack_end = .;
lld would put orphan sections like .comment before __stack_end,
corrupting the intended meaning.
The reason we don't normally move orphans past assignments to . is to
avoid breaking
rx_sec : { *(rx_sec) }
. = ALIGN(0x1000);
/* The RW PT_LOAD starts here*/
but in this case, there is nothing after and it seems safer to put the
orphan section last. This seems to match bfd's behavior and is
convenient for writing linker scripts that care about the layout of
SHF_ALLOC sections, but not of any non SHF_ALLOC sections.
llvm-svn: 313646
This patch removes lot of static Instances arrays from different input file
classes and introduces global arrays for access instead. Similar to arrays we
have for InputSections/OutputSectionCommands.
It allows to iterate over input files in a non-templated code.
Differential revision: https://reviews.llvm.org/D35987
llvm-svn: 313619
This is not really OK in C++11, and GCc triggers a warning.
We can switch back to default arguments when C++14 will be the
minimum version of the standard supported, see:
http://www.open-std.org/jtc1/sc22/wg21/docs/cwg_defects.html#974
Ack'ed by Rafael.
llvm-svn: 313550
This fixes pr34301.
As the bug points out, we want to keep some relocations with undefined
weak symbols. This means that we cannot always claim that these
symbols are not preemptible as we do now.
Unfortunately, we cannot also just always claim that they are
preemptible. Doing so would, for example, cause us to try to create a
plt entry when we don't even have a dynamic symbol table.
What almost works is to say that weak undefined symbols are
preemptible if and only if we have a dynamic symbol table. Almost
because we don't want to fail the build trying to create a copy
relocation to a weak undefined.
llvm-svn: 313372
_gp points to a position in the file, so it is not really absolute. It
is also simpler to not force it to be absolute, so if there is no
strong ABI requirement we should not do it.
llvm-svn: 313333
There is no need to scan over all input sections for relocatable output.
As we do not process or scan relocations anyways.
Patch moves check for Config->Relocatable out to avoid that and also removes
excessive check for isa<EhInputSection> from first for loop.
It is excessive because we handle all of them in a second for loop below.
That all allowed to simplify code.
Differential revision: https://reviews.llvm.org/D37746
llvm-svn: 313127
This allows combining --dynamic-list and version scripts too. The
version script controls which symbols are visible, and
--dynamic-list controls which of those are preemptible.
Unlike previous versions, undefined symbols are still considered
preemptible, which was the issue breaking the cfi tests.
This fixes pr34053.
llvm-svn: 312806
to separate commons based on file name patterns. The following linker script
construct does not work because commons are allocated before section placement
is done and the only synthesized BssSection that holds all commons has no file
associated with it:
SECTIONS { .common_0 : { *file0.o(COMMON) }}
This patch changes the allocation of commons to create a section per common
symbol and let the section logic do the layout.
Differential revision: https://reviews.llvm.org/D37489
llvm-svn: 312796
If --dynamic-list is given, only those symbols are preemptible.
This allows combining --dynamic-list and version scripts too. The
version script controls which symbols are visible, and --dynamic-list
controls which of those are preemptible.
This fixes pr34053.
llvm-svn: 312757
It is a bit more convinent and helps to simplify logic
of program headers allocation a little.
Differential revision: https://reviews.llvm.org/D34956
llvm-svn: 312711
The fixSectionAlignments() function may alter the alignment of some
OutputSections, this is likely to alter the addresses calculated earlier
in assignAddresses(). By moving the call to fixSectionAlignments() we
make sure that assignAddresses() is consistent with the early calculation
used for RangeThunks and the final call just before writing the image.
Differential Revision: https://reviews.llvm.org/D36739
llvm-svn: 312636
std::vector::insert invalidates all iterators, so it was not safe to do
Script->Opt.Commands.insert(++I, Make(ElfSym::End1));
Script->Opt.Commands.insert(++I, Make(ElfSym::End2));
because after the first line, `I` is no longer valid.
This patch rewrites fixes the issue. I belive the new code without
higher-order functions is a bit more readable than before.
llvm-svn: 312570
The problem with symbol assignments in implicit linker scripts is that
they can refer synthetic symbols such as _end, _etext or _edata. The
value of these symbols is currently fixed only after all linker script
commands are processed, so these assignments will be using non-final and
hence invalid value.
Rather than fixing the symbol values after all command processing have
finished, we instead change the logic to generate symbol assignment
commands that set the value of these symbols while processing the
commands, this ensures that the value is going to be correct by the time
any reference to these symbol is processed and is equivalent to defining
these symbols explicitly in linker script as BFD ld does.
Differential Revision: https://reviews.llvm.org/D36986
llvm-svn: 312305
Patch by Rafael Espíndola.
This is PR34053.
The implementation is a bit of a hack, given the precise location where
IsPreemtible is set, it cannot be used from
SymbolTable::handleAnonymousVersion.
I could add another method to SymbolTable if you think that would be
better.
Differential Revision: https://reviews.llvm.org/D36499
llvm-svn: 311468
With fix: explicitly specify ouput format for hexdump tool call.
Original commit message:
[ELF] - Do not forget to fill last bytes of PT_LOADs with trap instructions.
Previously last 4 bytes of executable loads
were not filled with trap instructions,
patch fixes this bug.
Differential revision: https://reviews.llvm.org/D36262
llvm-svn: 311315
Previously last 4 bytes of executable loads
were not filled with trap instructions,
patch fixes this bug.
Differential revision: https://reviews.llvm.org/D36262
llvm-svn: 311310
GdbIndexSection doesn't need lazy finalization because when an instance
of the class is created, we already know all debug info sections.
We can initialize the instnace in the ctor.
llvm-svn: 310931
Liveness is usually a notion of input sections, but this patch adds
"liveness" bit to common symbols because they don't belong to any
input section.
This patch is based on https://reviews.llvm.org/D36520
Differential Revision: https://reviews.llvm.org/D36546
llvm-svn: 310617
This is probably a small optimization, but the main motivation is
having a way of fixing pr34053 that doesn't require a hash lookup in
isPreempitible.
llvm-svn: 310602
Emit these symbols as long as we're building in a static configuration,
even if we're emitting a dynamic symbol table. This is consistent with
both bfd and gold.
Ordinarily, the combination of -static and -export-dynamic wouldn't make
much sense. Unfortunately, cmake versions prior to 3.4 forcefully
injected -rdynamic [1], so it seems worthwhile to support.
[1] https://cmake.org/cmake/help/v3.4/policy/CMP0065.html
Differential Revision: https://reviews.llvm.org/D36350
llvm-svn: 310168
With this Symbol has the same size as before, but DefinedRegular goes
from 72 to 64 bytes.
I also find this a bit easier to read. There are fewer places
initializing File for example.
This has a small but measurable speed improvement on all tests (1%
max).
llvm-svn: 310142
This is PR33889,
Patch adds support of combination of linkerscript and
-symbol-ordering-file option.
If no sorting commands are present in script inside section declaration
and no --sort-section option specified, code uses sorting from ordering
file if any exist.
Differential revision: https://reviews.llvm.org/D35843
llvm-svn: 310045
When the data segment is the last segment, it is correct to leave
it unaligned. However, when the code segment is the last segment,
it should be aligned to the page boundary to avoid loading the
non-segment parts of the ELF file at the end of the file.
Differential Revision: https://reviews.llvm.org/D33630
llvm-svn: 309829
This is a bit of a hack, but it is *so* convenient.
Now that we create synthetic linker scripts when none is provided, we
always have to handle paired OutputSection and OutputsectionCommand and
keep a mapping from one to the other.
This patch simplifies things by merging them and creating what used to
be OutputSectionCommands really early.
llvm-svn: 309311
That is slightly more convinent as allows to store pointer on
program header entry in a more safe way.
Change was used in 2 patches currently on review.
Differential revision: https://reviews.llvm.org/D35832
llvm-svn: 309253
I have a patch to let DwarfContext defer to lld for getting section
contents and relocations.
That is a pretty big performance improvement.
This is just a refactoring to make that easier to do.
This change makes the *creation* of gdb index a dedicated step and
makes that templated. That is so that we can uses Elf_Rel in the code.
llvm-svn: 307867
In preparation for the addition of rangeThunks() calculate the addresses
of all the inputSections so that ThunkSections can be inserted at the right
place.
Differential Revision: https://reviews.llvm.org/D34688
llvm-svn: 307373
The allocateHeaders() function is called at the end of assignAddresses(), it
decides whether the ELF header and program header table can be allocated to
a PT_LOAD program header. As the function alters state, it prevents
assignAddresses() from being called multiple times.
This change splits out the call to allocateHeaders() from assignAddresses()
this will permit assignAddresses() to be called while processing range
extension thunks without trying to allocateHeaders().
Differential Revision: https://reviews.llvm.org/D34344
llvm-svn: 307131
This is finally getting to the point where output sections are
constructed.
createOrphanCommands and fabricateDefaultCommands are moved out so
they can be merged with existing code in followup commits.
llvm-svn: 307107
Script commands are processed before unused synthetic sections are
removed. Therefore, if a linker script matches one of these sections
it'll get emitted as an empty output section because the logic for
removing unused synthetic sections ignores script commands which
could have already matched and captured one of these sections. This
patch fixes that by also removing the unused synthetic sections from
the script commands.
Differential Revision: https://reviews.llvm.org/D34800
llvm-svn: 307037
This is PR33596. Previously LLD would crash
because BYTE command synthesized output section,
but it was not assigned to Sec member of OutputSectionCommand.
Behaviour of -script and -r combination is not well defined,
but it seems after this change LLD naturally inherits behavior of
GNU linkers - creates output section requested in script and does not
crash anymore.
Differential revision: https://reviews.llvm.org/D34676
llvm-svn: 306527
When -ffunction-sections and ARM C++ exceptions are used each .text.suffix
section will have at least one .ARM.exidx.suffix section and may have an
additional .ARM.extab.suffix section if the unwinding instructions are too
large to inline into the .ARM.exidx table entry. For a large program without
a linker script this can lead to a large number of section header table
entries that can increase the size of the ELF file.
This change introduces a default rule for .ARM.extab.* to be placed in
a single output section called .ARM.extab . This follows the behavior of
ld.gold and ld.bfd.
fixes pr33407
Differential Revision: https://reviews.llvm.org/D34678
llvm-svn: 306522
Most "reserved" symbols are in ElfSym and it looks like there's no
reason to not do the same thing for _GLOBAL_OFFSET_TABLE_. This should
help https://reviews.llvm.org/D34618 too.
llvm-svn: 306292
On many architectures gcc and clang will recognize _GLOBAL_OFFSET_TABLE_ - .
and produce a relocation that can be processed without needing to know the
value of _GLOBAL_OFFSET_TABLE_. This is not always the case; for example ARM
gcc produces R_ARM_BASE_PREL but clang produces the more general
R_ARM_REL32 to _GLOBAL_OFFSET_TABLE_. To evaluate this relocation
correctly _GLOBAL_OFFSET_TABLE_ must be defined to be the either the base of
the GOT or end of the GOT dependent on architecture..
If/when llvm-mc is changed to recognize _GLOBAL_OFFSET_TABLE_ - . this
change will not be necessary for new objects. However there may still be
old objects and versions of clang.
Differential Revision: https://reviews.llvm.org/D34355
llvm-svn: 306282
I found this while trying to build u-boot. It uses -Ttext in
combination with linker scripts.
My first reaction was to change the linker scripts to have the correct
value, but I found that it is actually quite convenient to have -Ttext
take precedence.
By having just
.text : { *(.text) }
In the script, they can define the text address in a single Makefile
and pass it to ld with -Ttext and for the C code with
-DFoo=value. Doing the same with linker scripts would require them to
be generated during the build.
llvm-svn: 305766
In preparation for supporting range extension thunks we now continually
call createThunks() until no more thunks are added. This requires us to
record the thunks we add on each pass and only merge the new ones into the
OutputSection. We also need to check if a Relocation is targeting a thunk
to prevent us from infinitely creating more thunks.
Differential Revision: https://reviews.llvm.org/D34034
llvm-svn: 305555
This is probably the main patch left in unifying our intermediary
representation.
It moves the creation of default commands before section sorting. This
has the nice effect that we now have one location where we decide
where an orphan section should be placed.
Before this patch sortSections would decide the relative location of
orphan sections to other sections, but it was up to placeOrphanSection
to decide on the exact location.
We now only sort sections we created since the linker script is
already in the correct order.
llvm-svn: 305512
Thunks are now generated per InputSectionDescription instead of per
OutputSection. This allows created ThunkSections to be inserted directly
into InputSectionDescription.
Changes in this patch:
- Loop over InputSectionDescriptions to find relocations to Thunks
- Generate a ThunkSection per InputSectionDescription
- Remove synchronize() as we no longer need it
- Move fabricateDefaultCommands() before createThunks
Differential Revision: https://reviews.llvm.org/D33835
llvm-svn: 304887
Previously we would merge relocation sections by name.
That did not work in some cases, like testcase shows.
Patch implements logic to merge relocation sections if their target
sections were merged into the same output section.
Differential revision: https://reviews.llvm.org/D33824
llvm-svn: 304886
Before this patch in -r we compute the OutputSection sizes early in
the various calls to assignOffsets. With this change we can remove
most of those calls.
llvm-svn: 304860
Traditionally, it has been defined in crtbegin.o, which is typically
provided by libgcc or as part of the C library on some systems. However,
but there's no principled reason for it to be there. We optionaly
define this symbol, which can be used on platforms that don't provide
__dso_handle in crtbegin.o or which don't use crtbegin.o at all.
Differential Revision: https://reviews.llvm.org/D33856
llvm-svn: 304732
This is PR33289.
Previously LLD leaved section naming as is and that lead to wrong result,
because we decompress sections when using -r,
and hence should remove ".z" prefix.
Differential revision: https://reviews.llvm.org/D33885
llvm-svn: 304711
This change alters the sorting for OutputSections with the SHF_LINK_ORDER
flag in OutputSection::finalize() to use the InputSectionDescription
representation and not the OutputSection::Sections representation.
Differential revision: https://reviews.llvm.org/D33772
llvm-svn: 304700
This is probably the correct location for it: next to
fabricateDefaultCommands. If we don't have a linker script, we
fabricate one. If we have one, we patch it.
llvm-svn: 304436
Before InputSectionBase had an OutputSection pointer, but that was not
always valid. For example, if it was a merge section one actually had
to look at MergeSec->OutSec.
This was brittle and caused bugs like the one fixed by r304260.
We now have a single Parent pointer that points to an OutputSection
for InputSection, but to a SyntheticSection for merge sections and
.eh_frame. This makes it impossible to accidentally access an invalid
OutSec.
llvm-svn: 304338
When there is a linker script with .ARM.exidx in the SECTIONS
command we must add the .ARM.exidx sentinel section to the
InputSectionDescriptions as well as to OutputSection::Sections.
Differential Revision: https://reviews.llvm.org/D33496
llvm-svn: 304206
Now that we are trying to use the linker script representation as the
canonycal one, there are a few loops looking for just OutputSectionCommands.
Create a vector with just the OutputSectionCommands once that is
stable to simplify the rest of the code.
llvm-svn: 304181
On SPARC, .plt is both writeable and executable. The current way
sections are sorted means that lld puts it after .data/.bss. but it
really needs to be close to .test to make sure branches into .plt
don't overflow. I'd argue that because .bss is supposed to come last
on all architectures, we should change the default sort order such
that writable and executable sections come before sections that are
just writeable. read-only executable sections should still come after
sections that are just read-only of course. This diff makes this
change.
llvm-svn: 304008
In this way, the content and the flag is always consistent, which I
think better than removing the bit when input sections reaches the Writer.
llvm-svn: 303926
This reduces how many times we have to map from OutputSection to
OutputSectionCommand. It is a required step to moving
clearOutputSections earlier.
In order to always use writeTo in OutputSectionCommand we have to call
fabricateDefaultCommands for -r links and move section compression
after it.
llvm-svn: 303784
Once the dummy linker script is created, we want it to be used for
everything to avoid having two redundant representations that can get
out of sync.
We were already clearing OutputSections. With this patch we clear the
Sections vector of every OutputSection.
llvm-svn: 303703
This converts the last (chronologically) user of OutputSections to use
the linker script commands instead.
The idea is to convert all uses after fabricateDefaultCommands, so
that we have a single representation.
llvm-svn: 303384
GetSection is a template because write calls relocate.
relocate has two parts. The non alloc code really has to be a
template, as it is looking a raw input file data.
The alloc part is only a template because of getSize.
This patch folds the value of getSize early, detemplates
getRelocTargetVA and splits relocate into a templated non alloc case
and a regular function for the alloc case. This has the nice advantage
of making sure we collect all the information we need for relocations
before getting to InputSection::relocateNonAlloc.
Since we know got is alloc, it can just call the function directly and
avoid the template.
llvm-svn: 303355
Nothing special here, just detemplates code that became possible
to detemplate after recent commits in a straghtforward way.
Differential revision: https://reviews.llvm.org/D33234
llvm-svn: 303237
SymbolTableBaseSection was introduced.
Detemplation of SymbolTableSection should allow to detemplate more things.
Differential revision: https://reviews.llvm.org/D33124
llvm-svn: 303150
Switch to llvm::to_integer() everywhere in LLD instead of
StringRef::getAsInteger() because API of latter is confusing.
It returns true on error and false otherwise what makes reading
the code incomfortable.
Differential revision: https://reviews.llvm.org/D33187
llvm-svn: 303149
We used to place orphans by just using compareSectionsNonScript.
Then we noticed that since linker scripts can use another order, we
should first try match the section to a given PT_LOAD. But there is
nothing special about PT_LOAD. The same issue can show up for
PT_GNU_RELRO for example.
In general, we have to search for the most similar section and put the
orphan next to it. Most similar being defined as how long they follow
the same code path in compareSecitonsNonScript.
That is what this patch does. We now compute a rank for each output
section, with a bit for each branch in what was
compareSectionsNonScript.
With this findOrphanPos is now fully general and orphan placement can
be optimized by placing every section with the same rank at once.
The included testcase is a variation of many-sections.s that uses
allocatable sections to avoid the fast path in the existing
code. Without threads it goes form 46 seconds to 0.9 seconds.
llvm-svn: 302903
This behavior differs from the semantics implemented by GNU linkers
which only define this symbol iff ELF headers are in the memory
mapped segment.
Differential Revision: https://reviews.llvm.org/D33019
llvm-svn: 302687
This is a bit easier to read and a lot faster in some cases. A version
of many-sections.s with linker scripts goes from 0m41.232s to
0m19.575s.
llvm-svn: 302528
The code following this one already considers every possible insertion
point for orphan sections, there is no point in sorting them before.
llvm-svn: 302441
We can set SectionIndex tentatively as we process the linker script
instead of looking it repeatedly.
In general we should try to have as few name lookups as possible.
llvm-svn: 302299
In the non linker script case we would try very early to find out if
we could allocate the headers. Failing to do that would add extra
alignment to the first ro section, since we would set PageAlign
thinking it was the first section in the PT_LOAD.
In the linker script case the header allocation must be done in the
end, causing some duplication.
We now tentatively add the headers to the first PT_LOAD and if it
turns out they don't fit, remove them. With this we only need to
allocate the headers in one place in the code.
llvm-svn: 302186
The --section-start <name>=<address> needs to be translated into equivalent
linker script commands. There are a couple of problems with the existing
implementation:
- The --section-start with the lowest address is assumed to be at the start
of the map. This assumption is incorrect, we have to iterate through the
SectionStartMap to find the lowest address.
- The addresses in --section-start were being over-aligned when the
sections were marked as PageAlign. This is inconsistent with the use of
SectionStartMap in fixHeaders(), and can cause problems when the PageAlign
causes an "unable to move location counter backward" error when the
--section-start with PageAlign is aligned to an address higher than the next
--section-start. The ld.bfd and ld.gold seem to be more consistent with this
approach but this is not a well specified area.
This change fixes the problems above and also corrects a typo in which
fabricateDefaultCommands() is called with the wrong parameter, it should be
called with AllocateHeader not Config->MaxPageSize.
Differential Revision: https://reviews.llvm.org/D32749
llvm-svn: 302007
This version uses a set to speed up the synchronize method.
Original message:
Remove LinkerScript::flush.
This patch replaces flush with a last ditch attempt at synchronizing
the section list with the linker script "AST".
The synchronization is a bit of a hack and should in time be avoided
by creating the AST earlier so that modifications can be made directly
to it instead of modifying the section list and synchronizing it back.
This is the main step for fixing
https://bugs.llvm.org/show_bug.cgi?id=32816. With this in place I
think the only missing thing would be to have processCommands assign
section indexes as dummy offsets so that the sort in
OutputSection::finalize works.
With this LinkerScript::assignAddresses becomes much simpler, which
should help with the thunk work.
llvm-svn: 301745
This reverts commit r301678 since that change significantly slowed
down the linker. Before this patch, LLD could link clang in 8 seconds,
but with this patch it took 40 seconds.
llvm-svn: 301709
This patch replaces flush with a last ditch attempt at synchronizing
the section list with the linker script "AST".
The synchronization is a bit of a hack and should in time be avoided
by creating the AST earlier so that modifications can be made directly
to it instead of modifying the section list and synchronizing it back.
This is the main step for fixing
https://bugs.llvm.org/show_bug.cgi?id=32816. With this in place I
think the only missing thing would be to have processCommands assign
section indexes as dummy offsets so that the sort in
OutputSection::finalize works.
With this LinkerScript::assignAddresses becomes much simpler, which
should help with the thunk work.
llvm-svn: 301678
addIgnored defines a given symbol even if there is no existing
symbol with the same name. So, even if libc provides __tls_get_addr,
we should still be able to call addIgnored.
Differential Revision: https://reviews.llvm.org/D32053
llvm-svn: 301290
This change fabricates linker script commands for the case where there is
no linker script SECTIONS to control address assignment. This permits us
to have a single Script->assignAddresses() function.
There is a small change in user-visible-behavior with respect to the
handling of .tbss SHT_NOBITS, SHF_TLS as the Script->assignAddresses()
requires setDot() to be called with monotically increasing addresses.
The tls-offset.s test has been updated so that the script and non-script
results match.
This change should make the non-script behavior of lld closer to an
equivalent linker script.
Differential Revision: https://reviews.llvm.org/D31888
llvm-svn: 300687
Patch implements --compress-debug-sections=zlib.
In compare with D20211 (a year old patch, abandoned), it implementation
uses streaming and fully reimplemented, does not support zlib-gnu for
simplification.
This is PR32308.
Differential revision: https://reviews.llvm.org/D31941
llvm-svn: 300444
RELRO is a feature to make segments read-only after dynamic relocations
are applied. It is different from read-only segments because RELRO is
initially writable. And of course RELRO is different from writable
segments.
RELRO is not a very well known feature. We have a series of checks to
make a decision whether a section should be in a RELRO segment or not,
but we didn't describe why. This patch adds comments to explain how
that decision is made.
llvm-svn: 300176
Executable sections should not be padded with zero by default. On some
architectures, 0x00 is the start of a valid instruction sequence, so can confuse
disassembly between InputSections (and indeed the start of the next InputSection
in some situations). Further, in the case of misjumps into padding, padding may
start to be executed silently.
On x86, the "0xcc" byte represents the int3 trap instruction. It is a single
byte long so can serve well as padding. This change switches x86 (and x86_64) to
use this value for padding in executable sections, if no linker script directive
overrides it. It also puts the behaviour into place making it easy to change the
behaviour of other targets when desired. I do not know the relevant instruction
sequences for trap instructions on other targets however, so somebody should add
this separately.
Because the old behaviour simply wrote padding in the whole section before
overwriting most of it, this change also modifies the padding algorithm to write
padding only where needed. This in turn has caused a small behaviour change with
regards to what values are written via Fill commands in linker scripts, bringing
it into line with ld.bfd. The fill value is now written starting from the end of
the previous block, which means that it always starts from the first byte of the
fill, whereas the old behaviour meant that the padding sometimes started mid-way
through the fill value. See the test changes for more details.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D30886
Bugzilla: http://bugs.llvm.org/show_bug.cgi?id=32227
llvm-svn: 299635
For range extension thunks we will need to repeatedly call createThunks()
until no more thunks are created. We will need to retain the state of
Thunks that we have created so far to avoid recreating them on later
passes. This change does not change the functionality of createThunks().
Differential Revision: https://reviews.llvm.org/D31654
llvm-svn: 299530
GNU linkers define __bss_start symbol.
Patch teaches LLD to do that. This is PR32051.
Below is part of standart ld.bfd script:
.data1 : { *(.data1) }
_edata = .; PROVIDE (edata = .);
. = .;
__bss_start = .;
.bss :
{
Currently LLD can emit up to 3 .bss* sections as one of testcase shows.
Implementation inserts this symbol before first .bss* output section.
Differential revision: https://reviews.llvm.org/D30419
llvm-svn: 299528
LinkerScript used to be a template class, so we couldn't instantiate
that class in elf::link. We instantiated ScriptConfig class earlier
instead so that the linker script parser can store configurations to
the object.
Now that LinkerScript is not a template, it doesn't make sense to
separate ScriptConfig from LinkerScript. This patch merges them.
llvm-svn: 298457
Patch moves Sections array to
InputFile (root class for input files).
That allows to detemplate GdbIndexSection.
Differential revision: https://reviews.llvm.org/D30976
llvm-svn: 298345
The patch introduces two new relocations expressions R_MIPS_GOT_GP and
R_MIPS_GOT_GP_PC. The first one represents a current value of `_gp`
pointer and used to calculate relocations against the `__gnu_local_gp`
symbol. The second one represents the offset between the beginning of
the function and the `_gp` pointer's value.
There are two motivations for introducing new expressions:
- It's better to keep all non-trivial relocation calculations in the
single place - `getRelocTargetVA` function.
- Relocations against both `_gp_disp` and `__gnu_local_gp` symbols
depend on the `_gp` value. It's a magical value points to the "middle"
of GOT. Now all relocations use a common `_gp` value. But in fact,
under some conditions each input file might require its own `_gp`
value. I'm going to implement it in the future patches. So it's
better to make `MipsGotSection` responsible for calculation of
the `_gp` value.
llvm-svn: 298306
This continues detemplation process.
Detemplating MipsGotSection<ELFT> is helpfull because can
help to detemplate getRelocTargetVA. (one more change is required)
It opens road to detemplation of GotSection<ELFT> and probably
something else after that.
Differential revision: https://reviews.llvm.org/D31090
llvm-svn: 298272
Does not introduce anything new,
just performs detemplate, using methods we
already have.
Differential revision: https://reviews.llvm.org/D30935
llvm-svn: 298269
We had a few Config member functions that returns configuration values.
For example, we had is64() which returns true if the target is 64-bit.
The return values of these functions are constant and never change.
This patch is to compute them only once to make it clear that they'll
never change.
llvm-svn: 298168
With fix of next warning:
Writer.cpp:361:3: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Original commit message:
Patch reuses BssSection section to simplify creation of
COMMON section.
Differential revision: https://reviews.llvm.org/D30690
llvm-svn: 298086
Was fixed, details on review page.
Original commit message:
That removes CopyRelSection class completely, making
Bss/BssRelRo to be just regular synthetics.
This is splitted from D30541 and polished.
Difference from D30541 that all logic of SharedSymbol
converting to DefinedRegular was removed for now and
probably will be posted as separate patch.
Differential revision: https://reviews.llvm.org/D30892
llvm-svn: 298062
After introducing Config->is64Bit() and
recent changes in LinkerScriptBase, some
sections can be detemplated trivially. This
is one of such cases.
llvm-svn: 297825
StringTableSection was <ELFT> templated previously,
It disallow to de-template code that uses it,
for example LinkerScript<ELFT>::discard uses it as:
if (S == In<ELFT>::ShStrTab)
error("discarding .shstrtab section is not allowed");
It seems we can try to detemplate some of synthetic sections
and somehow make them available for non-templated calls.
(move out of In<ELFT> struct probably).
Differential revision: https://reviews.llvm.org/D30933
llvm-svn: 297815
That removes CopyRelSection class completely, making
Bss/BssRelRo to be just regular synthetics.
This is splitted from D30541 and polished.
Difference from D30541 that all logic of SharedSymbol
converting to DefinedRegular was removed for now and
probably will be posted as separate patch.
Differential revision: https://reviews.llvm.org/D30892
llvm-svn: 297814
Patch introduces Config->is64Bit() and with help of that detemplates
GotPltSection and IgotPltSection sections
Differential revision: https://reviews.llvm.org/D30944
llvm-svn: 297813
This also requires postponing the assignment the assignment of
symbols defined in input linker scripts since those can refer to
output sections and in case we don't have a SECTIONS command, we
need to wait until all output sections have been created and
assigned addresses.
Differential Revision: https://reviews.llvm.org/D30851
llvm-svn: 297802
We can move all not templated functionality to LinkerScriptBase.
Patch do that for hasPhdrsCommands() and shows how it helps to detemplate
things in other places.
Probably we should be able to merge these 2 classes into single one after such steps.
Even if not, it still looks as reasonable cleanup for me.
Differential revision: https://reviews.llvm.org/D30895
llvm-svn: 297714
lld crashes when .eh_frame or .eh_frame_hdr section is discarded
in linker script and there is no PHDRS directive.
Differential revision: https://reviews.llvm.org/D30885
llvm-svn: 297712
Fix a bug introduced in r297313 which caused them to resolve to the end
of the ELF header in PIEs and DSOs.
Differential Revision: https://reviews.llvm.org/D30843
llvm-svn: 297638
Using .eh_frame input section pattern in linker script currently
causes a crash; this is because .eh_frame input sections require
special handling since they're all combined into a synthetic
section rather than regular output section.
Differential Revision: https://reviews.llvm.org/D30627
llvm-svn: 297501
.eh_frame_hdr is a header constructed for .eh_frame sections.
We do not proccess .eh_frame when doing relocatable output,
so should not try to create .eh_frame_hdr too.
Previous behavior without this patch is segfault.
Fixes PR32118.
Differential revision: https://reviews.llvm.org/D30566
llvm-svn: 297365
With this we have a single section hierarchy. It is a bit less code,
but the main advantage will be in a future patch being able to handle
foo = symbol_in_obj;
in a linker script. Currently that fails since we try to find the
output section of symbol_in_obj. With this we should be able to just
return an InputSection from the expression.
llvm-svn: 297313
This change moves the calls to finalizeContent() for each synthetic section
before createThunks(). This will allow us to assign addresses prior to
calling createThunks(). As addition of thunks may add to the static
symbol table and may affect the size of the mips got section we introduce a
couple of additional member functions to update these values.
Differential revision: https://reviews.llvm.org/D29983
llvm-svn: 297277
In compare with D30458, this makes Bss/BssRelRo to be pure
synthetic sections.
That removes CopyRelSection class completely, making
Bss/BssRelRo to be just regular synthetics.
SharedSymbols involved in creating copy relocations are
converted to DefinedRegular, what also simplifies things.
Differential revision: https://reviews.llvm.org/D30541
llvm-svn: 297008
In many places we reset Size to 0 before calling assignOffsets()
manually. Sometimes we don't do that.
It looks we can just always do that inside.
Previous code had:
template <class ELFT> void OutputSection::assignOffsets() {
uint64_t Off = Size;
And tests feels fine with Off = 0.
I think Off = Size make no sence.
Differential revision: https://reviews.llvm.org/D30463
llvm-svn: 296609
Previously, these two functions put their symbols in different queues.
Now that the queues have been merged. So there's no point to keep two
separate functions.
llvm-svn: 296435
The list of all input sections was defined in SymbolTable class for a
historical reason. The list itself is not a template. However, because
SymbolTable class is a template, we needed to pass around ELFT to access
the list. This patch moves the list out of the class so that it doesn't
need ELFT.
llvm-svn: 296309
__ehdr_start should be pointing to ELF file headers, not program
headers.
This is a reland of D30319.
Differential Revision: https://reviews.llvm.org/D30323
llvm-svn: 296085
With this we complete the transition out of special output sections,
and with the previous patches it should be possible to merge
OutputSectionBase and OuputSection.
llvm-svn: 296023
With the current design an InputSection is basically anything that
goes directly in a OutputSection. That includes plain input section
but also synthetic sections, so this should probably not be a
template.
llvm-svn: 295993
This change moves the SymbolBodies with isLocal() == true before the global
symbols then calculating NumLocals rather than assuming all locals are
added before globals and the first NumLocals have isLocal() == true. This
permits Thunks to be moved after the pass that adds global symbols from
synthetics to the symbol table.
Differential revision: https://reviews.llvm.org/D30085
llvm-svn: 295650
This is a small difference I noticed to gold and bfd. When given
--print-gc-sections, we print sections a linkerscript marks
DISCARD. The other linkers don't.
llvm-svn: 295467
Without this we would produce two relocation sections pointing to the
same section, which gnu tools reject.
This fixes pr31986.
The implementation of -r/--emit-reloc is getting fairly
complicated. But lets get the test passing before trying to refactor
it.
llvm-svn: 295385
Previously, space in a BSS section for copy relocations are reserved
in a special way. We directly manipulated size of the BSS section.
r294577 changed the way of doing it. Now, we create an instance of
CopyRelSection (which is a synthetic input section) for each copy
relocation.
This patch removes the remains of the old way and add CopyRelSections
to BSS sections using `addSections` function, which is the usual
way to add an input section to an output section.
llvm-svn: 295278
For CloudABI I'm only interested in generating non-PIC/PIE executables
on armv6 and i686, as PIE introduces larger overhead than on aarch64 and
x86_64. Still, I want to be able to instruct the linker to generate a
dynamic symbol table if requested. One example use for this is that
dynamic symbol tables can be used by programs to print nicely formatted
stacktraces, including symbol names.
Right now there seems to be some logic in LLD that it only wants to emit
dynamic symbol tables when either linking against libraries or when
building PIC. Let's extend this to also take --export-dynamic into
account.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D29982
llvm-svn: 295240
Unfortunately some consumers of our .o files produced with -r expect
only one section symbol per section. That is true of at least of go's
own linker.
Combining them is a somewhat convoluted process. We have to create a
symbol for every section since we don't know which ones will be
needed. The relocation sections also have to be written first to
handle the Elf_Rel addend.
I did consider a completely different approach:
We could remove the -r special case of relocation sections when
reading. We would instead have a copyRelocs function that is used
instead of scanRelocs. It would create a DynamicReloc for each
relocation and a RelocationSection for each input relocation section.
A complication of such change is that DynamicReloc would have to take
a section index and a input section instead of a symbol since with
-emit-relocs some DynamicReloc would hold relocations referring to the
dynamic symbol table and other to the static symbol table.
That would be a pretty big change, and if we do it it is probably
better to do it as a refactoring.
llvm-svn: 294816
Much of the code in PltSection and IPltSection is similar, we identify
the IPlt by a HeaderSize of 0 and alter our behaviour in the member
functions appropriately:
-Iplt does not have a header
-Iplt always follows after the Plt
Differential Revision: https://reviews.llvm.org/D29664
llvm-svn: 294579
with temporarily file name fix in testcase.
Original commit message:
-q, --emit-relocs - Generate relocations in output
Simplest implementation:
* no GC case,
* no "/DISCARD/" linkerscript command support.
This patch is extracted from D28612 / D29636,
Relative to PR31579.
Differential revision: https://reviews.llvm.org/D29663
llvm-svn: 294469
-q, --emit-relocs - Generate relocations in output
Simplest implementation:
* no GC case,
* no "/DISCARD/" linkerscript command support.
This patch is extracted from D28612 / D29636,
Relative to PR31579.
Differential revision: https://reviews.llvm.org/D29663
llvm-svn: 294464
George Rimar