This patch adds support for a `header` declaration in a module map to specify
certain `stat` information (currently, size and mtime) about that header file.
This has two purposes:
- It removes the need to eagerly `stat` every file referenced by a module map.
Instead, we track a list of unresolved header files with each size / mtime
(actually, for simplicity, we track submodules with such headers), and when
attempting to look up a header file based on a `FileEntry`, we check if there
are any unresolved header directives with that `FileEntry`'s size / mtime and
perform deferred `stat`s if so.
- It permits a preprocessed module to be compiled without the original files
being present on disk. The only reason we used to need those files was to get
the `stat` information in order to do header -> module lookups when using the
module. If we're provided with the `stat` information in the preprocessed
module, we can avoid requiring the files to exist.
Unlike most `header` directives, if a `header` directive with `stat`
information has no corresponding on-disk file the enclosing module is *not*
marked unavailable (so that behavior is consistent regardless of whether we've
resolved a header directive, and so that preprocessed modules don't get marked
unavailable). We could actually do this for all `header` directives: the only
reason we mark the module unavailable if headers are missing is to give a
diagnostic slightly earlier (rather than waiting until we actually try to build
the module / load and validate its .pcm file).
Differential Revision: https://reviews.llvm.org/D33703
llvm-svn: 304515
This patch makes it an error to have a mismatch between the enabled
sanitizers in a CU, and in any module being imported into the CU. Only
mismatches between non-modular sanitizers are treated as errors.
This patch also includes non-modular sanitizers in module hashes, in
order to ensure module rebuilds occur when -fsanitize=X is toggled on
and off for non-modular sanitizers, and to cut down on module rebuilds
when the option is toggled for modular sanitizers.
This fixes a longstanding issue with implicit modules and sanitizers,
which Duncan originally diagnosed.
When building with implicit modules it's possible to hit a scenario
where modules are built without -fsanitize=address, and are subsequently
imported into CUs with -fsanitize=address enabled. This causes strange
failures at runtime. The case Duncan found affects libcxx, since its
vector implementation behaves differently when ASan is enabled.
Implicit module builds should "just work" when -fsanitize=X is toggled
on and off across multiple compiler invocations, which is what this
patch does.
Differential Revision: https://reviews.llvm.org/D32724
llvm-svn: 304463
to the original module map.
Also use the path and name of the original module map when emitting that
information into the .pcm file. The upshot of this is that the produced .pcm
file will track information for headers in their original locations (where the
module was preprocessed), not relative to whatever directory the preprocessed
module map was in when it was built.
llvm-svn: 304346
and it has an include guard, produce callbacks for a module import, not for a
skipped non-modular header.
Fixes -E output when preprocessing a module to list these cases as a module
import, rather than suppressing the #include and losing the import side effect.
llvm-svn: 304183
Summary: In order for libc++ to add `<experimental/coroutine>` to its module map, there has to be a feature that can be used to detect if coroutines support is enabled in Clang.
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D33538
llvm-svn: 304107
Summary: In order for libc++ to add `<experimental/coroutine>` to its module map, there has to be a feature that can be used to detect if coroutines support is enabled in Clang.
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D33538
llvm-svn: 304054
We currenltly assert when want to diagnose a missing import and the decl
in question is already visible. It turns out that the decl in question
might be visible because another decl from the same module actually made
the module visible in a previous error diagnostic.
Remove the assertion and avoid re-exporting the module if it's already
visible.
rdar://problem/27975402
Differential Revision: https://reviews.llvm.org/D32828
llvm-svn: 303705
When reaching the end of a module, we used to convert its macros to
ModuleMacros but also leave them in the MacroDirective chain for the
identifier. This meant that every lookup of such a macro would find two
(identical) definitions. It also made it difficult to determine the correct
owner for a macro when reaching the end of a module: the most recent
MacroDirective in the chain could be from an #included submodule rather than
the current module.
Simplify this: whenever we convert a MacroDirective to a ModuleMacro when
leaving a module, clear out the MacroDirective chain for that identifier, and
just rely on the ModuleMacro to provide the macro definition information.
(We don't want to do this for local submodule visibility mode, because in that
mode we maintain a distinct MacroDirective chain for each submodule, and we
need to keep around the prior MacroDirective in case we re-enter the submodule
-- for instance, if its header is #included more than once in a module build,
we need the include guard directive to stick around. But the problem doesn't
arise in this case for the same reason: each submodule has its own
MacroDirective chain, so the macros don't leak out of submodules in the first
place.)
This reinstates r302932, reverted in r302947, with a fix for a bug that
resulted in us sometimes losing macro definitions due to failing to clear out
the overridden module macro list when promoting a directive to a module macro.
llvm-svn: 303468
specification and the TU to the new module.
This is necessary to get the module ownership correct for entities that we
temporarily hang off the TranslationUnitDecl, such as template parameters and
function parameters.
llvm-svn: 303373
inferring based on the current module at the point of creation.
This should result in no functional change except when building a preprocessed
module (or more generally when using #pragma clang module begin/end to switch
module in the middle of a file), in which case it allows us to correctly track
the owning module for declarations. We can't map from FileID to module in the
preprocessed module case, since all modules would have the same FileID.
There are still a couple of remaining places that try to infer a module from a
source location; I'll clean those up in follow-up changes.
llvm-svn: 303322
retrieving the identifer info for an Objective-C keyword
This commit fixes an assertion that's triggered in getIdentifier when the token
is an annotation token.
rdar://32225463
llvm-svn: 303246
rather than waiting until it's queried.
Currently this is only applied to local submodule visibility mode, as we don't
yet allocate storage for the owning module in non-local-visibility modules
compilations.
This reinstates r302965, reverted in r303037, with a fix for the reported
crash, which occurred when reparenting a local declaration to be a child of
a hidden imported declaration (specifically during template instantiation).
llvm-svn: 303224
The AST merges NamespaceDecls, but for module debug info it is
important to put a namespace decl (or rather its children) into the
correct (sub-)module, so we need to use the parent module of the decl
that triggered this namespace to be serialized as a second key when
looking up DINamespace nodes.
rdar://problem/29339538
llvm-svn: 302840
Diagnostics related to redefinition errors that point to the same header
file do not provide much information that helps users fixing the issue.
- In the modules context, it usually happens because of non modular
includes.
- When modules aren't involved it might happen because of the lack of
header guards.
Enhance diagnostics in these scenarios.
Differential Revision: https://reviews.llvm.org/D28832
rdar://problem/31669175
llvm-svn: 302765
When a type in a class is from a typedef, only check the canonical type. Skip
checking the intermediate underlying types. This is in response to PR 32965
llvm-svn: 302505
In r298391 we fixed the umbrella framework model to work when submodules
named "Private" are used. This complements the work by allowing the
umbrella framework model to work in general.
rdar://problem/31790067
llvm-svn: 302491
To support this, an optional marker "#pragma clang module contents" is
recognized in module map files, and the rest of the module map file from that
point onwards is treated as the source of the module. Preprocessing a module
map produces the input module followed by the marker and then the preprocessed
contents of the module.
Ignoring line markers, a preprocessed module might look like this:
module A {
header "a.h"
}
#pragma clang module contents
#pragma clang module begin A
// ... a.h ...
#pragma clang module end
The preprocessed output generates line markers, which are not accepted by the
module map parser, so -x c++-module-map-cpp-output should be used to compile
such outputs.
A couple of major parts do not work yet:
1) The files that are listed in the module map must exist on disk, in order to
build the on-disk header -> module lookup table in the PCM file. To fix
this, we need the preprocessed output to track the file size and other stat
information we might use to build the lookup table.
2) Declaration ownership semantics don't work properly yet, since mapping from
a source location to a module relies on mapping from FileIDs to modules,
which we can't do if module transitions can occur in the middle of a file.
llvm-svn: 302309
These pragmas are intended to simulate the effect of entering or leaving a file
with an associated module. This is not completely implemented yet: declarations
between the pragmas will not be attributed to the correct module, but macro
visibility is already functional.
Modules named by #pragma clang module begin must already be known to clang (in
some module map that's either loaded or on the search path).
llvm-svn: 302098
The intent for an explicit module build is that the diagnostics produced within
the module are those that were configured when the module was built, not those
that are enabled within a user of the module. This includes diagnostics that
don't actually show up until the module is used (for instance, diagnostics
produced during template instantiation and weird cases like -Wpadded).
We serialized and restored the diagnostic state for individual warning groups,
but previously did not track the state for flags like -Werror and -Weverything,
which are implemented as separate bits rather than as part of the diagnostics
mapping information.
llvm-svn: 301992
If a file has no diagnostic pragmas, we build its diagnostic state lazily, but
in this case we never set up the root state to be the diagnostic state in which
the module was originally built, so the diagnostic flags for files in the
module with no diagnostic pragmas were incorrectly based on the user of the
module rather than the diagnostic state when the module was built.
llvm-svn: 301846
These tests do not appear to be Darwin-specific, and this REQUIRES: appears to
be hiding a real bug; this change is just restoring the prior state to get the
buildbots happy again while we investigate. (The system-darwin requirement is
covered by PR32851.)
llvm-svn: 301840
Also remove the apparently-unneeded REQUIRES (the tests also pass on at least
Linux, and don't appear to have anything Darwin-specific in them).
llvm-svn: 301731
Many of our supported configurations support modules but do not have any
first-class syntax to perform a module import. This leaves us with a problem:
there is no way to represent the expansion of a #include that imports a module
in the -E output for such languages. (We don't want to just leave it as a
#include because that requires the consumer of the preprocessed source to have
the same file system layout and include paths as the creator.)
This patch adds a new pragma:
#pragma clang module import MODULE.NAME.HERE
that imports a module, and changes -E and -frewrite-includes to use it when
rewriting a #include that maps to a module import. We don't make any attempt
to use a native language syntax import if one exists, to get more consistent
output. (If in the future, @import and #include have different semantics in
some way, the pragma will track the #include semantics.)
llvm-svn: 301725
action to the general FrontendAction infrastructure.
This permits applying -E, -ast-dump, -fsyntax-only, and so on to a module map
compilation. (The -E form is not currently especially useful yet as there's no
good way to take the output and use it to actually build a module.)
In order to support this, -cc1 now accepts -x <lang>-module-map in all cases
where it accepts -x <lang> for a language we can parse (not ir/ast). And for
uniformity, we also accept -x <lang>-header for all such languages (we used
to reject for cuda and renderscript), and -x <lang>-cpp-output for all such
languages (we used to reject for c, cl, and renderscript).
(None of these new alternatives are accepted by the driver yet, so no
user-visible changes.)
llvm-svn: 301610
One of the -Wincomplete-umbrella warnings diagnoses when a header is present in
the directory but it's not present in the umbrella header. Currently, this
warning only happens on top level modules; any submodule using an umbrella
header does not get this warning. Fix that by also considering the submodules.
Differential Revision: https://reviews.llvm.org/D32576
rdar://problem/22623686
llvm-svn: 301597
Do not add an overload if the function doesn't have a prototype; this
can happen if, for instance, a misplaced/malformed call site is
considered like a declaration for recovery purposes.
rdar://problem/31306325
llvm-svn: 301453
Use definition from canonical decl when checking for designated
initializers. This is necessary since deserialization of a interface
might reuse the definition from the canonical one (see r281119).
rdar://problem/29360655
llvm-svn: 301382
When looking for the template instantiation pattern of a templated entity,
consistently select the definition of the pattern if there is one. This means
we'll pick the same owning module when we start instantiating a template that
we'll later pick when determining which modules are visible during that
instantiation.
This reinstates r300650, reverted in r300659, with a fix for a regression
reported by Chandler after commit.
llvm-svn: 300938
Use a macro to generate the struct with all decls. Previously, four identical
changes would be needed to update this test. This macro reduces that to one
location. Added two other tests for issues that triggered false positives
during testing.
llvm-svn: 300814
modules but exposes much more widespread issues. Example and more
information is on the review thread for r300650.
Original commit summary:
[modules] Properly look up the owning module for an instantiation of a merged template.
llvm-svn: 300659
When looking for the template instantiation pattern of a templated entity,
consistently select the definition of the pattern if there is one. This means
we'll pick the same owning module when we start instantiating a template that
we'll later pick when determining which modules are visible during that
instantiation.
llvm-svn: 300650
The modules side of r299226, which serializes #pragma pack state,
doesn't work well.
The main purpose was to make -include and -include-pch match semantics
(the PCH side). We also started serializing #pragma pack in PCMs, in
the hopes of making modules and non-modules builds more consistent. But
consider:
$ cat a.h
$ cat b.h
#pragma pack(push, 2)
$ cat module.modulemap
module M {
module a { header "a.h" }
module b { header "b.h" }
}
$ cat t.cpp
#include "a.h"
#pragma pack(show)
As of r299226, the #pragma pack(show) gives "2", even though we've only
included "a.h".
- With -fmodules-local-submodule-visibility, this is clearly wrong. We
should get the default state (8 on x86_64).
- Without -fmodules-local-submodule-visibility, this kind of matches how
other things work (as if include-the-whole-module), but it's still
really terrible, and it doesn't actually make modules and non-modules
builds more consistent.
This commit disables the serialization for modules, essentially a
partial revert of r299226.
Going forward:
1. Having this #pragma pack stuff escape is terrible design (or, more
often, a horrible bug). We should prioritize adding warnings (maybe
-Werror by default?).
2. If we eventually reintroduce this for modules, it should only apply
to -fmodules-local-submodule-visibility, and it should be tracked on
a per-submodule basis.
llvm-svn: 300380
This reverts an attempt to check that types match when matching a
dependently-typed non-type template parameter. (This comes up when matching the
parameters of a template template parameter against the parameters of a
template template argument.)
The matching rules here are murky at best. Our behavior after this revert is
definitely wrong for certain C++17 features (for 'auto' template parameter
types within the parameter list of a template template argument in particular),
but our behavior before this revert is wrong for some pre-existing testcases,
so reverting to our prior behavior seems like our best option.
llvm-svn: 300262
Remove the restriction where this is only valid with C++
rdar://problem/29055656
Differential Revision: https://reviews.llvm.org/D31781
llvm-svn: 300108
This allows using and testing these two features separately. (noteably,
debug info is, so far as I know, always a win (basically). But function
modular codegen is currently a loss for highly optimized code - where
most of the linkonce_odr definitions are optimized away, so providing
weak_odr definitions is only overhead)
llvm-svn: 300104
This isn't need anymore and modules options -fbuild-session-file and
-fmodules-validate-once-per-build-session already provide a sane
mechanism to validate the system headers.
rdar://problem/19767523
llvm-svn: 300027
r293123 started serializing diagnostic pragma state for modules. This
makes the serialization work properly for implicit modules.
An implicit module build (using Clang's internal build system) uses the
same PCM file location for different `-Werror` levels.
E.g., if a TU has `-Werror=format` and tries to load a PCM built without
`-Werror=format`, a new PCM will be built in its place (and the new PCM
should have the same signature, since r297655). In the other direction,
if a TU does not have `-Werror=format` and tries to load a PCM built
with `-Werror=format`, it should "just work".
The idea is to evolve the PCM toward the strictest -Werror flags that
anyone tries.
r293123 started serializing the diagnostic pragma state for each PCM.
Since this encodes the -Werror settings at module-build time, it breaks
the implicit build model.
This commit filters the diagnostic state in order to simulate the
current compilation's diagnostic settings. Firstly, it ignores the
module's serialized first diagnostic state, replacing it with the state
from this compilation's command-line. Secondly, if a pragma warning was
upgraded to error/fatal when generating the PCM (e.g., due to `-Werror`
on the command-line), it checks whether it should still be upgraded in
its current context.
llvm-svn: 300025
r299989 fixes the underlying issue by waiting long enough to late parsed
arguments to be processed before doing an calculating the hash.
r298742
[ODRHash] Add error messages for mismatched parameters in methods.
r298754
[ODRHash] Add support for array and decayed types.
llvm-svn: 300001
Matching the function-homing support for modular codegen. Any type
implicitly (implicit template specializations) or explicitly defined in
a module is attached to that module's object file and omitted elsewhere
(only a declaration used if necessary for references).
llvm-svn: 299987
Some decls are created not where they are written, but in other module
files/users (implicit special members and function template implicit
specializations). To correctly identify them, use a bit next to the definition
to track the modular codegen property.
Discussed whether the module file bit could be omitted in favor of
reconstituting from the modular codegen decls list - best guess today is that
the efficiency improvement of not having to deserialize the whole list whenever
any function is queried by a module user is worth it for the small size
increase of this redundant (list + bit-on-def) representation.
Reviewers: rsmith
Differential Revision: https://reviews.llvm.org/D29901
llvm-svn: 299982
This patch serializes the state of #pragma pack. It preserves the state of the
pragma from a PCH/from modules in a file that uses that PCH/those modules.
rdar://21359084
Differential Revision: https://reviews.llvm.org/D31241
llvm-svn: 299226
Fix the current parsing of subframeworks in modulemaps to lookup for
headers based on whether they are frameworks.
rdar://problem/30563982
llvm-svn: 298391
This reverts commit r298185, effectively reapplying r298165, after fixing the
new unit tests (PR32338). The memory buffer generator doesn't null-terminate
the MemoryBuffer it creates; this version of the commit informs getMemBuffer
about that to avoid the assert.
Original commit message follows:
----
Clang's internal build system for implicit modules uses lock files to
ensure that after a process writes a PCM it will read the same one back
in (without contention from other -cc1 commands). Since PCMs are read
from disk repeatedly while invalidating, building, and importing, the
lock is not released quickly. Furthermore, the LockFileManager is not
robust in every environment. Other -cc1 commands can stall until
timeout (after about eight minutes).
This commit changes the lock file from being necessary for correctness
to a (possibly dubious) performance hack. The remaining benefit is to
reduce duplicate work in competing -cc1 commands which depend on the
same module. Follow-up commits will change the internal build system to
continue after a timeout, and reduce the timeout. Perhaps we should
reconsider blocking at all.
This also fixes a use-after-free, when one part of a compilation
validates a PCM and starts using it, and another tries to swap out the
PCM for something new.
The PCMCache is a new type called MemoryBufferCache, which saves memory
buffers based on their filename. Its ownership is shared by the
CompilerInstance and ModuleManager.
- The ModuleManager stores PCMs there that it loads from disk, never
touching the disk if the cache is hot.
- When modules fail to validate, they're removed from the cache.
- When a CompilerInstance is spawned to build a new module, each
already-loaded PCM is assumed to be valid, and is frozen to avoid
the use-after-free.
- Any newly-built module is written directly to the cache to avoid the
round-trip to the filesystem, making lock files unnecessary for
correctness.
Original patch by Manman Ren; most testcases by Adrian Prantl!
llvm-svn: 298278
Clang's internal build system for implicit modules uses lock files to
ensure that after a process writes a PCM it will read the same one back
in (without contention from other -cc1 commands). Since PCMs are read
from disk repeatedly while invalidating, building, and importing, the
lock is not released quickly. Furthermore, the LockFileManager is not
robust in every environment. Other -cc1 commands can stall until
timeout (after about eight minutes).
This commit changes the lock file from being necessary for correctness
to a (possibly dubious) performance hack. The remaining benefit is to
reduce duplicate work in competing -cc1 commands which depend on the
same module. Follow-up commits will change the internal build system to
continue after a timeout, and reduce the timeout. Perhaps we should
reconsider blocking at all.
This also fixes a use-after-free, when one part of a compilation
validates a PCM and starts using it, and another tries to swap out the
PCM for something new.
The PCMCache is a new type called MemoryBufferCache, which saves memory
buffers based on their filename. Its ownership is shared by the
CompilerInstance and ModuleManager.
- The ModuleManager stores PCMs there that it loads from disk, never
touching the disk if the cache is hot.
- When modules fail to validate, they're removed from the cache.
- When a CompilerInstance is spawned to build a new module, each
already-loaded PCM is assumed to be valid, and is frozen to avoid
the use-after-free.
- Any newly-built module is written directly to the cache to avoid the
round-trip to the filesystem, making lock files unnecessary for
correctness.
Original patch by Manman Ren; most testcases by Adrian Prantl!
llvm-svn: 298165
This fixes lookup mismatches that could happen when the module cache
path contained a '/./' component.
<rdar://problem/30413458>
Differential Revision: https://reviews.llvm.org/D30915
llvm-svn: 297790
Change ASTFileSignature from a random 32-bit number to the hash of the
PCM content.
- Move definition ASTFileSignature to Basic/Module.h so Module and
ASTSourceDescriptor can use it.
- Change the signature from uint64_t to std::array<uint32_t,5>.
- Stop using (saving/reading) the size and modification time of PCM
files when there is a valid SIGNATURE.
- Add UNHASHED_CONTROL_BLOCK, and use it to store the SIGNATURE record
and other records that shouldn't affect the hash. Because implicit
modules reuses the same file for multiple levels of -Werror, this
includes DIAGNOSTIC_OPTIONS and DIAG_PRAGMA_MAPPINGS.
This helps to solve a PCH + implicit Modules dependency issue: PCH files
are handled by the external build system, whereas implicit modules are
handled by internal compiler build system. This prevents invalidating a
PCH when the compiler overwrites a PCM file with the same content
(modulo the diagnostic differences).
Design and original patch by Manman Ren!
llvm-svn: 297655
Printing typedefs or type aliases using clang_getTypeSpelling() is missing the
namespace they are defined in. This is in contrast to other types that always
yield the full typename including namespaces.
Patch by Michael Reiher!
Differential Revision: https://reviews.llvm.org/D29944
llvm-svn: 297465
Now print diagnostics for static, virtual, inline, volatile, and const
differences in methods. Also use DeclarationName instead of IdentifierInfo
for additional robustness in diagnostic printing.
llvm-svn: 296932
The goal of this is to fix a bug in modules where we'd merge
FunctionDecls that differed in their pass_object_size attributes. Since
we can overload on the presence of pass_object_size attributes, this
behavior is incorrect.
We don't represent `N` in `pass_object_size(N)` as part of
ExtParameterInfo, since it's an error to overload solely on the value of
N. This means that we have a bug if we have two modules that declare
functions that differ only in their pass_object_size attrs, like so:
// In module A, from a.h
void foo(char *__attribute__((pass_object_size(0))));
// In module B, from b.h
void foo(char *__attribute__((pass_object_size(1))));
// In module C, in main.c
#include "a.h"
#include "b.h"
At the moment, we'll merge the foo decls, when we should instead emit a
diagnostic about an invalid overload. We seem to have similar (silent)
behavior if we overload only on the return type of `foo` instead; I'll
try to find a good place to put a FIXME (or I'll just file a bug) soon.
This patch also fixes a bug where we'd not output the proper extended
parameter info for declarations with pass_object_size attrs.
llvm-svn: 296076
Fields will now have their types added to the hash, allowing for detection of
mismatched field types. This detection allows the existing ODR checking to
produce the correct message.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295931
IdentifierInfo is hashed based on the stored string. FieldDecl versus other
Decl is now detected, as well as differently named fields.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295911
Richard Smith