Add new method getFirstInputSection and use instead of getInputSections
where appropriate to avoid creation of an unneeded vector of input
sections.
Differential Revision: https://reviews.llvm.org/D73047
The INPUT_SECTION_FLAGS linker script command is used to constrain the
section pattern matching to sections that match certain combinations of
flags.
There are two ways to express the constraint.
withFlags: Section must have these flags.
withoutFlags: Section must not have these flags.
The syntax of the command is:
INPUT_SECTION_FLAGS '(' sect_flag_list ')'
sect_flag_list: NAME
| sect_flag_list '&' NAME
Where NAME matches a section flag name such as SHF_EXECINSTR, or the
integer value of a section flag. If the first character of NAME is ! then
it means must not contain flag.
We do not support the rare case of { INPUT_SECTION_FLAGS(flags) filespec }
where filespec has no input section description like (.text).
As an example from the ld man page:
SECTIONS {
.text : { INPUT_SECTION_FLAGS (SHF_MERGE & SHF_STRINGS) *(.text) }
.text2 : { INPUT_SECTION_FLAGS (!SHF_WRITE) *(.text) }
}
.text will match sections called .text that have both the SHF_MERGE and
SHF_STRINGS flag.
.text2 will match sections called .text that don't have the SHF_WRITE flag.
The flag names accepted are the generic to all targets and SHF_ARM_PURECODE
as it is very useful to filter all the pure code sections into a single
program header that can be marked execute never.
fixes PR44265
Differential Revision: https://reviews.llvm.org/D72756
Summary:
Unlike R_RISCV_RELAX, which is a linker hint, R_RISCV_ALIGN requires the
support of the linker even when ignoring all R_RISCV_RELAX relocations.
This is because the compiler emits as many NOPs as may be required for
the requested alignment, more than may be required pre-relaxation, to
allow for the target becoming more unaligned after relaxing earlier
sequences. This means that the target is often not initially aligned in
the object files, and so the R_RISCV_ALIGN relocations cannot just be
ignored. Since we do not support linker relaxation, we must turn these
into errors.
Reviewers: ruiu, MaskRay, espindola
Reviewed By: MaskRay
Subscribers: grimar, Jim, emaste, arichardson, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71820
The code doesn't apply the fix correctly to relocatable links. I could
try to fix the code that applies the fix, but it's pointless: we don't
actually know what the offset will be in the final executable. So just
ignore the flag for relocatable links.
Issue discovered building Android.
Differential Revision: https://reviews.llvm.org/D72968
This essentially reverts b841e119d7.
Such code construct can be used in the following way:
// glibc/stdlib/exit.c
// clang -fuse-ld=lld => succeeded
// clang -fuse-ld=lld -fpie -pie => relocation R_PLT_PC cannot refer to absolute symbol
__attribute__((weak, visibility("hidden"))) extern void __call_tls_dtors();
void __run_exit_handlers() {
if (__call_tls_dtors)
__call_tls_dtors();
}
Since we allow R_PLT_PC in -no-pie mode, it makes sense to allow it in
-pie mode as well.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D72943
In D71281 a fix was put in to round up the size of a ThunkSection to the
nearest 4KiB when performing errata patching. This fixed a problem with a
very large instrumented program that had thunks and patches mutually
trigger each other. Unfortunately it triggers an assertion failure in an
AArch64 allyesconfig build of the kernel. There is a specific assertion
preventing an InputSectionDescription being larger than 4KiB. This will
always trigger if there is at least one Thunk needed in that
InputSectionDescription, which is possible for an allyesconfig build.
Abstractly the problem case is:
.text : {
*(.text) ;
...
. = ALIGN(SZ_4K);
__idmap_text_start = .;
*(.idmap.text)
__idmap_text_end = .;
...
}
The assertion checks that __idmap_text_end - __idmap_start is < 4 KiB.
Note that there is more than one InputSectionDescription in the
OutputSection so we can't just restrict the fix to OutputSections smaller
than 4 KiB.
The fix presented here limits the D71281 to InputSectionDescriptions that
meet the following conditions:
1.) The OutputSection is bigger than the thunkSectionSpacing so adding
thunks will affect the addresses of following code.
2.) The InputSectionDescription is larger than 4 KiB. This will prevent
any assertion failures that an InputSectionDescription is < 4 KiB
in size.
We do this at ThunkSection creation time as at this point we know that
the addresses are stable and up to date prior to adding the thunks as
assignAddresses() will have been called immediately prior to thunk
generation.
The fix reverts the two tests affected by D71281 to their original state
as they no longer need the 4KiB size roundup. I've added simpler tests to
check for D71281 when the OutputSection size is larger than the ThunkSection
spacing.
Fixes https://github.com/ClangBuiltLinux/linux/issues/812
Differential Revision: https://reviews.llvm.org/D72344
`{clang,gcc} -nostdlib -r a.c` passes --dynamic-linker to the linker,
and the expected behavior is to ignore it.
If .interp is kept in the relocatable object file, a final link will get
PT_INTERP even if --dynamic-linker is not specified. glibc ld.so expects
to see PT_DYNAMIC and the executable will likely fail to run.
Ignore --dynamic-linker in -r mode as well as -shared.
ThunkSection contains 4-byte instructions on all targets that use
thunks. Thunks should not be used in any performance sensitive places,
and locality/cache line/instruction fetching arguments should not apply.
We use 16 bytes as preferred function alignments for modern PowerPC cores.
In any case, 8 is not optimal.
Differential Revision: https://reviews.llvm.org/D72819
Moved the section name check ahead of any filename matching or
exclusion. Firstly, this reduces the need to retrieve the filename and
secondly, reduces the amount of potentially expensive filename pattern
matching if such rules are present in the linker script.
The impact of this change is particularly significant when linking
objects built with -ffunction-sections and -fstack-size-section, using a
linker script that includes non-trivial filename patterns. In a number
of such cases, the link time is halved.
Differential Revision: https://reviews.llvm.org/D72775
This assertion was added as part of D70659 but did not account for .bss
input sections. I noticed that this assert was incorrectly triggering
while building FreeBSD for MIPS64. Fixed by relaxing the assert to also
account for SHT_NOBITS input sections and adjust the test
mips-jalr-non-function.s to link a file with a .bss section first.
Reviewed By: MaskRay, grimar
Differential Revision: https://reviews.llvm.org/D72567
R_HINT is ignored like R_NONE. There are no strong reasons to keep
R_HINT. The largest RelExpr member R_RISCV_PC_INDIRECT is 60 now.
Differential Revision: https://reviews.llvm.org/D71822
Suggested by Peter Collingbourne.
Non-VER_NDX_GLOBAL versions should not be assigned to defined symbols. --exclude-libs violates this and can cause a spurious error "cannot refer to absolute symbol" after D71795.
excludeLibs incorrectly assigns VER_NDX_LOCAL to an undefined weak symbol =>
isPreemptible is false =>
R_PLT_PC is optimized to R_PC =>
in isStaticLinkTimeConstant, an error is emitted.
Reviewed By: pcc, grimar
Differential Revision: https://reviews.llvm.org/D72681
This patch is a joint work by Rui Ueyama and me based on D58102 by Xiang Zhang.
It adds Intel CET (Control-flow Enforcement Technology) support to lld.
The implementation follows the draft version of psABI which you can
download from https://github.com/hjl-tools/x86-psABI/wiki/X86-psABI.
CET introduces a new restriction on indirect jump instructions so that
you can limit the places to which you can jump to using indirect jumps.
In order to use the feature, you need to compile source files with
-fcf-protection=full.
* IBT is enabled if all input files are compiled with the flag. To force enabling ibt, pass -z force-ibt.
* SHSTK is enabled if all input files are compiled with the flag, or if -z shstk is specified.
IBT-enabled executables/shared objects have two PLT sections, ".plt" and
".plt.sec". For the details as to why we have two sections, please read
the comments.
Reviewed By: xiangzhangllvm
Differential Revision: https://reviews.llvm.org/D59780
RELA targets don't read initial .got.plt entries.
REL targets (ARM, x86-32) write the address of the IFUNC resolver to the
entry (`write32le(buf, s.getVA())`).
The default writeIgotPlt() is not meaningful. Make it a no-op. AArch64
and x86-64 will have 0 as initial .got.plt entries associated with
IFUNC.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D72474
down to pass builder in ltobackend.
Currently CodeGenOpts like UnrollLoops/VectorizeLoop/VectorizeSLP in clang
are not passed down to pass builder in ltobackend when new pass manager is
used. This is inconsistent with the behavior when new pass manager is used
and thinlto is not used. Such inconsistency causes slp vectorization pass
not being enabled in ltobackend for O3 + thinlto right now. This patch
fixes that.
Differential Revision: https://reviews.llvm.org/D72386
An undefined weak does not fetch the lazy definition. A lazy weak symbol
should be considered undefined, and thus preemptible if .dynsym exists.
D71795 is not quite an NFC. It errors on an R_X86_64_PLT32 referencing
an undefined weak symbol. isPreemptible is false (incorrect) => R_PLT_PC
is optimized to R_PC => in isStaticLinkTimeConstant, an error is emitted
when an R_PC is applied on an undefined weak (considered absolute).
Weak undefined symbols are preemptible after D71794.
if (sym.isPreemptible)
return false;
if (!config->isPic)
return true;
// isPic means includeInDynsym is true after D71794.
...
// We can delete this if because it can never be true.
if (sym.isUndefWeak)
return true;
Differential Revision: https://reviews.llvm.org/D71795
D59275 added the following clause to Symbol::includeInDynsym()
if (isUndefWeak() && Config->Pie && SharedFiles.empty())
return false;
D59549 explored the possibility to generalize it for -no-pie.
GNU ld's rules are architecture dependent and partly controlled by -z
{,no-}dynamic-undefined-weak. Our attempts to mimic its rules are
actually half-baked and don't provide perceivable benefits (it can save
a few more weak undefined symbols in .dynsym in a -static-pie
executable). Let's just delete the rule for simplicity. We will expect
cosmetic inconsistencies with ld.bfd in certain -static-pie scenarios.
This permits a simplification in D71795.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D71794
In AArch64 a branch to an undefined weak symbol that does not have a PLT
entry should resolve to the next instruction. The thunk generation code
can prevent this from happening as a range extension thunk can be generated
if the branch is sufficiently far away from 0, the value of an undefined
weak symbol.
The fix is taken from the Arm implementation of needsThunk(), we prevent a
thunk from being generated to an undefined weak symbol.
fixes pr44451
Differential Revision: https://reviews.llvm.org/D72267
```
lld/ELF/Relocations.cpp:1622:56: warning: loop variable 'ts' of type 'const std::pair<ThunkSection *, uint32_t>' (aka 'const pair<lld:🧝:ThunkSection *, unsigned int>') creates a copy from type 'const std::pair<ThunkSection *, uint32_t>' [-Wrange-loop-analysis]
for (const std::pair<ThunkSection *, uint32_t> ts : isd->thunkSections)
```
Drop const qualifier to fix -Wrange-loop-analysis.
We can make -Wrange-loop-analysis warnings (DiagnoseForRangeConstVariableCopies) on `const A` more
permissive on more types (e.g. POD -> trivially copyable), unfortunately it will not make std::pair
good, because `constexpr pair& operator=(const pair& p);` is unfortunately user-defined.
Reviewed By: Mordante
Differential Revision: https://reviews.llvm.org/D72211
One instance looks like a false positive:
lld/ELF/Relocations.cpp:1622:14: note: use reference type 'const std::pair<ThunkSection *, uint32_t> &' (aka 'cons
t pair<lld:🧝:ThunkSection *, unsigned int> &') to prevent copying
for (const std::pair<ThunkSection *, uint32_t> ts : isd->thunkSections)
It is not changed in this commit.
GCC before r245813 (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79439)
did not emit nop after b/bl. This can happen with recursive calls.
r245813 was back ported to GCC 5.5 and GCC 6.4.
This is common, for example, libstdc++.a(locale.o) shipped with GCC 4.9
and many objects in netlib lapack can cause lld to error. gold allows
such calls to the same section. Our __plt_foo symbol's `section` field
is used for ThunkSection, so we can't implement a similar loosen rule
easily. But we can make use of its `file` field which is currently NULL.
Differential Revision: https://reviews.llvm.org/D71639
Similar to D71509 (EM_PPC64), on EM_PPC, the IPLT code sequence should
be similar to a PLT call stub. Unlike EM_PPC64, EM_PPC -msecure-plt has
small/large PIC model differences.
* -fpic/-fpie: R_PPC_PLTREL24 r_addend=0. The call stub loads an address relative to `_GLOBAL_OFFSET_TABLE_`.
* -fPIC/-fPIE: R_PPC_PLTREL24 r_addend=0x8000. (A partial linked object
file may have an addend larger than 0x8000.) The call stub loads an address relative to .got2+0x8000.
Just assume large PIC model for now. This patch makes:
// clang -fuse-ld=lld -msecure-plt -fno-pie -no-pie a.c
// clang -fuse-ld=lld -msecure-plt -fPIE -pie a.c
#include <stdio.h>
static void impl(void) { puts("meow"); }
void thefunc(void) __attribute__((ifunc("resolver")));
void *resolver(void) { return &impl; }
int main(void) {
thefunc();
void (*theptr)(void) = &thefunc;
theptr();
}
work on Linux glibc. -fpie will crash because the compiler and the
linker do not agree on the value which r30 stores (_GLOBAL_OFFSET_TABLE_
vs .got2+0x8000).
Differential Revision: https://reviews.llvm.org/D71621
Non-preemptible IFUNC are placed in in.iplt (.glink on EM_PPC64). If
there is a non-GOT non-PLT relocation, for pointer equality, we change
the type of the symbol from STT_IFUNC and STT_FUNC and bind it to the
.glink entry.
On EM_386, EM_X86_64, EM_ARM, and EM_AARCH64, the PLT code sequence
loads the address from its associated .got.plt slot. An IPLT also has an
associated .got.plt slot and can use the same code sequence.
On EM_PPC64, the PLT code sequence is actually a bl instruction in
.glink . It jumps to `__glink_PLTresolve` (the PLT header). and
`__glink_PLTresolve` computes the .plt slot (relocated by
R_PPC64_JUMP_SLOT).
An IPLT does not have an associated R_PPC64_JUMP_SLOT, so we cannot use
`bl` in .iplt . Instead, create a call stub which has a similar code
sequence as PPC64PltCallStub. We don't save the TOC pointer, so such
scenarios will not work: a function pointer to a non-preemptible ifunc,
which resolves to a function defined in another DSO. This is the
restriction described by https://sourceware.org/glibc/wiki/GNU_IFUNC
(though on many architectures it works in practice):
Requirement (a): Resolver must be defined in the same translation unit as the implementations.
If an ifunc is taken address but not called, technically we don't need
an entry for it, but we currently do that.
This patch makes
// clang -fuse-ld=lld -fno-pie -no-pie a.c
// clang -fuse-ld=lld -fPIE -pie a.c
#include <stdio.h>
static void impl(void) { puts("meow"); }
void thefunc(void) __attribute__((ifunc("resolver")));
void *resolver(void) { return &impl; }
int main(void) {
thefunc();
void (*theptr)(void) = &thefunc;
theptr();
}
work on Linux glibc and FreeBSD. Calling a function pointer pointing to
a Non-preemptible IFUNC never worked before.
Differential Revision: https://reviews.llvm.org/D71509
This restores commit 1417558e4a and its follow-up, reverted by commit c3dbd782f1.
After this commit:
clang -fuse-ld=bfd -no-pie -nostdlib a.c => .interp not created
clang -fuse-ld=bfd -pie -fPIE -nostdlib a.c => .interp created
clang -fuse-ld=gold -no-pie -nostdlib a.c => .interp not created
clang -fuse-ld=gold -pie -fPIE -nostdlib a.c => .interp created
clang -fuse-ld=lld -no-pie -nostdlib a.c => .interp created
clang -fuse-ld=lld -pie -fPIE -nostdlib a.c => .interp created
This reverts commit 1417558e4a.
Also reverts commit 019a92bb28.
This causes check-sanitizer to fail. The "-Nolib" variant of the test
crashes on startup in the loader.
Similar to rL362355, but with the `!config->shared` guard.
(1) {gcc,clang} -fuse-ld=bfd -pie -fPIE -nostdlib a.c => .interp created
(2) {gcc,clang} -fuse-ld=lld -pie -fPIE -nostdlib a.c => .interp not created
(3) {gcc,clang} -fuse-ld=lld -pie -fPIE -nostdlib a.c a.so => .interp created
The inconsistency of (2) is due to the condition `!Config->SharedFiles.empty()`.
To make lld behave more like ld.bfd, we could change the condition to:
config->hasDynSymTab && !config->dynamicLinker.empty() && script->needsInterpSection();
However, that would bring another inconsistency as can be observed with:
(4) {gcc,clang} -fuse-ld=bfd -no-pie -nostdlib a.c => .interp not created
Linux powerpc discards `*(.gnu.version*)` (arch/powerpc/kernel/vmlinux.lds.S)
to suppress --orphan-handling=warn warnings in the -pie output `.tmp_vmlinux1`
The support is simple. Just add isLive() to:
1) Fix an assertion in SectionBase::getPartition() called by VersionTableSection::isNeeded().
2) Suppress DT_VERSYM, DT_VERDEF, DT_VERNEED and DT_VERNEEDNUM, if the relevant section is discarded.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D71819
For undef-not-suggest.test, we currently make redundant alternative
spelling suggestions:
```
ld.lld: error: relocation refers to a discarded section: .text.foo
>>> defined in a.o
>>> section group signature: foo
>>> prevailing definition is in a.o
>>> referenced by a.o:(.rodata+0x0)
>>> did you mean:
>>> defined in: a.o
ld.lld: error: relocation refers to a symbol in a discarded section: foo
>>> defined in a.o
>>> section group signature: foo
>>> prevailing definition is in a.o
>>> referenced by a.o:(.rodata+0x8)
>>> did you mean: for
>>> defined in: a.o
```
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D71735
Summary:
If none of the input files are ELF object files (for example, when
generating an object file from a single binary input file via
"-b binary"), use a fallback value for the ELF header flags instead
of crashing with an assertion failure.
Reviewers: MaskRay, ruiu, espindola
Reviewed By: MaskRay, ruiu
Subscribers: kevans, grimar, emaste, arichardson, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits, jrtc27
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71101
GNU ld creates the synthetic section .iplt, and has a built-in linker
script that assigns .iplt to the output section .plt . There is no
output section named .iplt .
Making .iplt an output section actually has a benefit that makes the
tricky toolchain feature stand out. Symbolizers don't have to deal with
mixed PLT entries (e.g. llvm-objdump -d incorrectly annotates such jump
targets).
On EM_PPC{,64}, .glink contains a PLT resolver and a series of jump
instructions. The 4-byte entry size makes it unnecessary to have an
alignment of 16.
Mark ppc32-gnu-ifunc.s and ppc32-gnu-ifunc-nonpreemptable.s as `XFAIL: *`.
They test IPLT on EM_PPC, which never works.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D71520
PltSection is used by both PLT and IPLT. The PLT section may have a
header while the IPLT section does not. Split off IpltSection from
PltSection to be clearer.
Unlike other targets, PPC64 cannot use the same code sequence for PLT
and IPLT. This helps make a future PPC64 patch (D71509) more isolated.
On EM_386 and EM_X86_64, when PLT is empty while IPLT is not, currently
we are inconsistent whether the PLT header is conceptually attached to
in.plt or in.iplt . Consistently attach the header to in.plt can make
the -z retpolineplt logic simpler. It also makes `jmp` point to an
aesthetically better place for non-retpolineplt cases.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D71519
This change only affects EM_386. relOff can be computed from `index`
easily, so it is unnecessarily passed as a parameter.
Both in.plt and in.iplt entries are written by writePLT. For in.iplt,
the instruction `push reloc_offset` will change because `index` is now
different. Fortunately, this does not matter because `push; jmp` is only
used by PLT. IPLT does not need the code sequence.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D71518
This reverts commit 2bbd32f5e8, it was
causing UBSan failures like the following:
lld/ELF/Target.cpp:103:41: runtime error: applying non-zero offset 24 to null pointer
When a common symbol is merged with a shared symbol, increase st_size if
the shared symbol has a larger st_size. At runtime, the executable's
symbol overrides the shared symbol. The shared symbol may be created
from common symbols in a previous link. This rule makes sure we pick
the largest size among all common symbols.
This behavior matches GNU ld. See
https://sourceware.org/bugzilla/show_bug.cgi?id=25236 for discussions.
A shared symbol does not hold alignment constraints. Ignore the
alignment update.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D71161
Summary:
So far it seems like the only test affected by this change is the one I
recently added for R_MIPS_JALR relocations since the other test cases that
use this function early (unknown-relocation-*) do not have a valid input
section for the relocation offset.
Reviewers: ruiu, grimar, MaskRay, espindola
Reviewed By: ruiu, MaskRay
Subscribers: emaste, sdardis, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70659
On some edge cases such as Chromium compiled with full instrumentation we
have a .text section over twice the size of the maximum branch range and
the instrumented code generation containing many examples of the erratum
sequence. The combination of Thunks and many erratum sequences causes
finalizeAddressDependentContent() to not converge. We end up with:
start
- Thunk Creation (disturbs addresses after thunks, creating more patches)
- Patch Creation (disturbs addresses after patches, creating more thunks)
- goto start
In most images with few thunks and patches the mutual disturbance does not
cause convergence problems. As the .text size and number of patches go up
the risk increases.
A way to prevent the thunk creation from interfering with patch creation is
to round up the size of the thunks to a 4KiB boundary when the
erratum patch is enabled. As the erratum sequence only triggers when an
instruction sequence starts at 0xff8 or 0xffc modulo (4 KiB) by making the
thunks not affect addresses modulo (4 KiB) we prevent thunks from
interfering with the patch.
The patches themselves could be aggregated in the same way that Thunks are
within ThunkSections and we could round up the size in the same way. This
would reduce the number of patches created in a .text section size >
128 MiB but would not likely help convergence problems.
Differential Revision: https://reviews.llvm.org/D71281
fixes (remaining part of) pr44071, other part in D71242
The code to insert patch section merges them with a comparison function that
uses logic of the form:
return (isa<PatchSection>(a) && !isa<PatchSection>(b));
If the PatchSections don't implement classof this check fails if b is also
a SyntheticSection. This can result in the patches being out of range if
the SyntheticSection is big, for example a ThunkSection with lots of thunks.
Differential Revision: https://reviews.llvm.org/D71242
fixes (part of) pr44071
clang/gcc -fdebug-type-sections places .debug_types and
.rela.debug_types in a section group, with a signature symbol which
represents the type signature. The section group is for deduplication
purposes.
After D70146, we will discard such section groups. Refine the rule so
that we will retain the group if no member has the SHF_ALLOC flag.
GNU ld has a similar rule to retain the group if all members have the
SEC_DEBUGGING flag. We try to be more general for future-proof purposes:
if other non-SHF_ALLOC sections have deduplication needs, they may be
placed in a section group. Don't discard them.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D71157
Fixes PPC64 part of PR40438
// clang -target ppc64le -c a.cc
// .text.unlikely may be placed in a separate output section (via -z keep-text-section-prefix)
// The distance between bar in .text.unlikely and foo in .text may be larger than 32MiB.
static void foo() {}
__attribute__((section(".text.unlikely"))) static int bar() { foo(); return 0; }
__attribute__((used)) static int dummy = bar();
This patch makes such thunks with addends work for PPC64.
AArch64: .text -> `__AArch64ADRPThunk_ (adrp x16, ...; add x16, x16, ...; br x16)` -> target
PPC64: .text -> `__long_branch_ (addis 12, 2, ...; ld 12, ...(12); mtctr 12; bctr)` -> target
AArch64 can leverage ADRP to jump to the target directly, but PPC64
needs to load an address from .branch_lt . Before Power ISA v3.0, the
PC-relative ADDPCIS was not available. .branch_lt was invented to work
around the limitation.
Symbol::ppc64BranchltIndex is replaced by
PPC64LongBranchTargetSection::entry_index which take addends into
consideration.
The tests are rewritten: ppc64-long-branch.s tests -no-pie and
ppc64-long-branch-pi.s tests -pie and -shared.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D70937
replaceWithDefined is used by canonical PLT and copy relocations, which
imply that the symbol is preemptable. ppc64BranchltIndex is only used by
non-preemptable cases, and it can only be the default value in
replaceWithDefined.
The .note.gnu.property SHT_NOTE sections on AArch64 (a 64-bit target)
should have alignment 8 to more closely match the binutils implementation
where alignment is 4-bytes on 32-bit machines and 8-bytes on 64-bit
machines.
Previously LLD was using 4 for both 32-bit and 64-bit machines.
Differential Revision: https://reviews.llvm.org/D70962
The PT_GNU_PROPERTY program header describes the location of the
.note.gnu.property SHT_NOTES section. The linux kernel uses this program
header to find the .note.gnu.property section rather than parsing.
Executables that have properties that the kernel needs to act on that don't
have the PT_GNU_PROPERTY program header will not boot.
Differential Revision: https://reviews.llvm.org/D70961
Fixes AArch64 part of PR40438
The current range extension thunk framework does not handle a relocation
relative to a STT_SECTION symbol with a non-zero addend, which may be
used by jumps/calls to local functions on some RELA targets (AArch64,
powerpc ELFv1, powerpc64 ELFv2, etc). See PR40438 and the following
code for examples:
// clang -target $target a.cc
// .text.cold may be placed in a separate output section.
// The distance between bar in .text.cold and foo in .text may be larger than 128MiB.
static void foo() {}
__attribute__((section(".text.cold"))) static int bar() { foo(); return
0; }
__attribute__((used)) static int dummy = bar();
This patch makes such thunks with addends work for AArch64. The target
independent part can be reused by PPC in the future.
On REL targets (ARM, MIPS), jumps/calls are not represented as
STT_SECTION + non-zero addend (see
MCELFObjectTargetWriter::needsRelocateWithSymbol), so they don't need
this feature, but we need to make sure this patch does not affect them.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D70637
ThunkCreator::getThunk and ThunkCreator::normalizeExistingThunk
currently assume that the implicit addends are -8 for ARM and -4 for
Thumb. In D70637, ThunkCreator::getThunk will need to take care of the
relocation addend explicitly.
Add the utility function getPCBias() as a prerequisite so that the getThunk change in D70637
can be more general.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D70690
D62381 introduced forEachSymbol(). It seems that many call sites cannot
be parallelized because the body shared some states. Replace
forEachSymbol with iterator_range<filter_iterator<...>> symbols() to
simplify code and improve debuggability (std::function calls take some
frames).
It also allows us to use early return to simplify code added in D69650.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D70505
Currently LLD always use zlib compression level 6.
This patch changes it to use 1 for -O0, -O1 and 6 for -O2.
It fixes https://bugs.llvm.org/show_bug.cgi?id=44089.
There was also a thread in llvm-dev on this topic:
https://lists.llvm.org/pipermail/llvm-dev/2018-August/125020.html
Here is a table with results of building clang mentioned there:
```
Level Time Size
0 0m17.128s 2045081496 Z_NO_COMPRESSION
1 0m31.471s 922618584 Z_BEST_SPEED
2 0m32.659s 903642376
3 0m36.749s 890805856
4 0m41.532s 876697184
5 0m48.383s 862778576
6 1m3.176s 855251640 Z_DEFAULT_COMPRESSION
7 1m15.335s 853755920
8 2m0.561s 852497560
9 2m33.972s 852397408 Z_BEST_COMPRESSION
```
It shows that it is probably not reasonable to use values greater than 6.
Differential revision: https://reviews.llvm.org/D70658
In GNU ld, -Ttext sets the address of the .text section and -Ttext-segment sets the address of the text segment (RX).
gold only supports the -Ttext-segment semantic and treats -Ttext as an alias for -Ttext-segment.
lld only supports the -Ttext semantic and treats -Ttext-segment as an
alias for -Ttext. The text segment will be assigned to an address less
than the specified -Ttext-segment value.
This patch drops the -Ttext-segment alias.
The text segment is traditionally the first segment. Users who specify
-Ttext-segment may actually want to specify --image-base, the lld way to
express this. Unfortunately currently this is supported by GNU ld's
COFF port but not by its ELF port. gold does not support this option.
With -z separate-code, the behavior of GNU ld -Ttext-segment is weird (see https://sourceware.org/bugzilla/show_bug.cgi?id=25207)
rL289827 introduced the alias for linking qemu's non-pie user mode
binaries. As explained previously, this actually assigns the text
segment to an address less than 0x60000000. I feel that a better fix is
on the qemu side:
https://lists.nongnu.org/archive/html/qemu-devel/2019-11/msg02480.html
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D70468
Remove the lld::enableColors function, as it just obscures which
stream it's affecting, and replace with explicit calls to the stream's
enable_colors.
Also, assign the stderrOS and stdoutOS globals first in link function,
just to ensure nothing might use them.
(Either change individually fixes the issue of using the old
stream, but both together seems best.)
Follow-up to b11386f9be.
Differential Revision: https://reviews.llvm.org/D70492
Summary:
Current versions of clang would erroneously emit this relocation not only
against functions (loaded from the GOT) but also against data symbols
(e.g. a table of function pointers). LLD was then changing this into a
branch-and-link instruction, causing the program to jump to the data
symbol at run time. I discovered this problem when attempting to boot
MIPS64 FreeBSD after updating the to the latest upstream master.
Reviewers: atanasyan, jrtc27, espindola
Reviewed By: atanasyan
Subscribers: emaste, sdardis, krytarowski, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70406
Based on D70020 by serge-sans-paille.
The ELF spec says:
> Furthermore, there may be internal references among these sections that would not make sense if one of the sections were removed or replaced by a duplicate from another object. Therefore, such groups must be included or omitted from the linked object as a unit. A section cannot be a member of more than one group.
GNU ld has 2 behaviors that we don't have:
- Group members (nextInSectionGroup != nullptr) are subject to garbage collection.
This includes non-SHF_ALLOC SHT_NOTE sections.
In particular, discarding non-SHF_ALLOC SHT_NOTE sections is an expected behavior by the Annobin
project. See
https://developers.redhat.com/blog/2018/02/20/annobin-storing-information-binaries/
for more information.
- Groups members are retained or discarded as a unit.
Members may have internal references that are not expressed as
SHF_LINK_ORDER, relocations, etc. It seems that we should be more conservative here:
if a section is marked live, mark all the other member within the
group.
Both behaviors are reasonable. This patch implements them.
A new field InputSectionBase::nextInSectionGroup tracks the next member
within a group. on ELF64, this increases sizeof(InputSectionBase) froms
144 to 152.
InputSectionBase::dependentSections tracks section dependencies, which
is used by both --gc-sections and /DISCARD/. We can't overload it for
the "next member" semantic, because we should allow /DISCARD/ to discard
sections independent of --gc-sections (GNU ld behavior). This behavior
may be reasonably used by `/DISCARD/ : { *(.ARM.exidx*) }` or `/DISCARD/
: { *(.note*) }` (new test `linkerscript/discard-group.s`).
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D70146
This change is for those who use lld as a library. Context:
https://reviews.llvm.org/D70287
This patch adds a new parmeter to lld::*::link() so that we can pass
an raw_ostream object representing stdout. Previously, lld::*::link()
took only an stderr object.
Justification for making stdoutOS and stderrOS mandatory: I wanted to
make link() functions to take stdout and stderr in that order.
However, if we change the function signature from
bool link(ArrayRef<const char *> args, bool canExitEarly,
raw_ostream &stderrOS = llvm::errs());
to
bool link(ArrayRef<const char *> args, bool canExitEarly,
raw_ostream &stdoutOS = llvm::outs(),
raw_ostream &stderrOS = llvm::errs());
, then the meaning of existing code that passes stderrOS silently
changes (stderrOS would be interpreted as stdoutOS). So, I chose to
make existing code not to compile, so that developers can fix their
code.
Differential Revision: https://reviews.llvm.org/D70292
The patch in https://reviews.llvm.org/D64077 causes a build failure
because both the Defined and SharedSymbol classes are bigger than 80
bytes on MinGW 8.
This patch fixes this build failure by changing the type of the
bitfields. It is a similar change to the bitfield changes in
https://reviews.llvm.org/D64238, but instead of changing to bool I
decided to use uint8_t because one of the bitfields takes up two bits
instead of one.
Note: the patch is slightly different from the one reviewed in
Phabricator, but it is a trivial change to align it with LLVM master
instead of LLVM 9. Also, it passes all lld tests.
Differential Revision: https://reviews.llvm.org/D70266
The definition may be mangled while an undefined reference is not.
This may come up when (1) the reference is from a C file or (2) the definition
misses an extern "C".
(2) is more common. Suggest an arbitrary mangled name that matches the
undefined reference, if such a definition exists.
ld.lld: error: undefined symbol: foo
>>> referenced by a.o:(.text+0x1)
>>> did you mean to declare foo(int) as extern "C"?
>>> defined in: a1.o
Reviewed By: dblaikie, ruiu
Differential Revision: https://reviews.llvm.org/D69650
When missing an extern "C" declaration, an undefined reference may be
mangled while the definition is not. Suggest the missing
extern "C" and the base name.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D69592
The logic added in r372781 caused ARMExidxSyntheticSection::addSection()
to return false for exidx sections without a link order dep that passed
isValidExidxSectionDep(). This included exidx sections for empty functions. As
a result, such exidx sections would end up treated like ordinary sections and
would end up being laid out before the ARMExidxSyntheticSection, most likely in
the wrong order relative to the exidx entries in the ARMExidxSyntheticSection,
breaking the orderedness invariant relied upon by unwinders. Fix this by
simply discarding such sections.
Differential Revision: https://reviews.llvm.org/D69744
Summary:
Add a flag `F_no_mmap` to `FileOutputBuffer` to support
`--[no-]mmap-output-file` in ELF LLD. LLD currently explicitly ignores
this flag for compatibility with GNU ld and gold.
We need this flag to speed up link time for large binaries in certain
scenarios. When we link some of our larger binaries we find that LLD
takes 50+ GB of memory, which causes memory pressure. The memory
pressure causes the VM to flush dirty pages of the output file to disk.
This is normally okay, since we should be flushing cold pages. However,
when using BtrFS with compression we need to write 128KB at a time when
we flush a page. If any page in that 128KB block is written again, then
it must be flushed a second time, and so on. Since LLD doesn't write
sequentially this causes write amplification. The same 128KB block will
end up being flushed multiple times, causing the linker to many times
more IO than necessary. We've observed 3-5x faster builds with
-no-mmap-output-file when we hit this scenario.
The bad scenario only applies to compressed filesystems, which group
together multiple pages into a single compressed block. I've tested
BtrFS, but the problem will be present for any compressed filesystem
on Linux, since it is caused by the VM.
Silently ignoring --no-mmap-output-file caused a silent regression when
we switched from gold to lld. We pass --no-mmap-output-file to fix this
edge case, but since lld silently ignored the flag we didn't realize it
wasn't being respected.
Benchmark building a 9 GB binary that exposes this edge case. I linked 3
times with --mmap-output-file and 3 times with --no-mmap-output-file and
took the average. The machine has 24 cores @ 2.4 GHz, 112 GB of RAM,
BtrFS mounted with -compress-force=zstd, and an 80% full disk.
| Mode | Time |
|---------|-------|
| mmap | 894 s |
| no mmap | 126 s |
When compression is disabled, BtrFS performs just as well with and
without mmap on this benchmark.
I was unable to reproduce the regression with any binaries in
lld-speed-test.
Reviewed By: ruiu, MaskRay
Differential Revision: https://reviews.llvm.org/D69294
Add a new '-z nognustack' option that suppresses emitting PT_GNU_STACK
segment. This segment is not supported at all on NetBSD (stack is
always non-executable), and the option is meant to be used to disable
emitting it.
Differential Revision: https://reviews.llvm.org/D56554
sections, but the current code misses certain variants. In particular, those
named when clang takes the code path in
clang/lib/Driver/ToolChain.cpp:416, where crtfiles are named:
clang_rt.<component>-<arch>-<env>.<suffix>
Previously, the code only handled:
clang_rt.<component>.<suffix>
<component>.<suffix>
This revision fixes that.
Fix PR43767
In -r mode, when processing a SHT_REL[A] that relocates a SHF_MERGE, sec->getRelocatedSection() is a
MergeInputSection and its parent is an OutputSection but is asserted to
be a SyntheticSection (MergeSyntheticSection) in LinkerScript.cpp:addInputSec().
##
The code path is not exercised in non -r mode because the relocated
section changed from MergeInputSection to InputSection.
Reorder the code to make the non -r logic apply to -r as well, thus fix
the crash.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D69364
The only condition that isecLoc becomes null is
Out::bufferStart == nullptr,
isec->getParent()->offset == 0, and
isec->outSecOff == 0.
We can check the first condition only once.
llvm-svn: 374332
isecLoc there can be null, but at the same time isec->getSize() may
be non-null. It is UB to offset a nullptr.The most straight-forward fix
here appears to perform casts+normal integral arithmetics.
FAIL: lld :: ELF/invalid/invalid-relocation-aarch64.test (1158 of 2217)
******************** TEST 'lld :: ELF/invalid/invalid-relocation-aarch64.test' FAILED ********************
Script:
--
: 'RUN: at line 2'; /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/bin/yaml2obj /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/lld/test/ELF/invalid/invalid-relocation-aarch64.test -o /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/tools/lld/test/ELF/invalid/Output/invalid-relocation-aarch64.test.tmp.o
: 'RUN: at line 3'; not /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/bin/ld.lld /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/tools/lld/test/ELF/invalid/Output/invalid-relocation-aarch64.test.tmp.o -o /dev/null 2>&1 | /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/bin/FileCheck /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/lld/test/ELF/invalid/invalid-relocation-aarch64.test
--
Exit Code: 1
Command Output (stderr):
--
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/lld/test/ELF/invalid/invalid-relocation-aarch64.test:4:10: error: CHECK: expected string not found in input
# CHECK: error: unknown relocation (1024) against symbol foo
^
<stdin>:1:1: note: scanning from here
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/lld/ELF/Target.cpp💯41: runtime error: applying non-zero offset 24 to null pointer
^
<stdin>:1:118: note: possible intended match here
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/lld/ELF/Target.cpp💯41: runtime error: applying non-zero offset 24 to null pointer
^
--
********************
Testing: 0.. 10.. 20.. 30.. 40.. 50.
FAIL: lld :: ELF/invalid/invalid-relocation-x64.test (1270 of 2217)
******************** TEST 'lld :: ELF/invalid/invalid-relocation-x64.test' FAILED ********************
Script:
--
: 'RUN: at line 2'; /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/bin/yaml2obj /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/lld/test/ELF/invalid/invalid-relocation-x64.test -o /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/tools/lld/test/ELF/invalid/Output/invalid-relocation-x64.test.tmp1.o
: 'RUN: at line 3'; echo ".global foo; foo:" > /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/tools/lld/test/ELF/invalid/Output/invalid-relocation-x64.test.tmp2.s
: 'RUN: at line 4'; /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/bin/llvm-mc /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/tools/lld/test/ELF/invalid/Output/invalid-relocation-x64.test.tmp2.s -o /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/tools/lld/test/ELF/invalid/Output/invalid-relocation-x64.test.tmp2.o -filetype=obj -triple x86_64-pc-linux
: 'RUN: at line 5'; not /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/bin/ld.lld /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/tools/lld/test/ELF/invalid/Output/invalid-relocation-x64.test.tmp1.o /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/tools/lld/test/ELF/invalid/Output/invalid-relocation-x64.test.tmp2.o -o /dev/null 2>&1 | /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/bin/FileCheck /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/lld/test/ELF/invalid/invalid-relocation-x64.test
--
Exit Code: 1
Command Output (stderr):
--
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/lld/test/ELF/invalid/invalid-relocation-x64.test:6:10: error: CHECK: expected string not found in input
# CHECK: error: unknown relocation (152) against symbol foo
^
<stdin>:1:1: note: scanning from here
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/lld/ELF/Target.cpp💯41: runtime error: applying non-zero offset 24 to null pointer
^
<stdin>:1:118: note: possible intended match here
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/lld/ELF/Target.cpp💯41: runtime error: applying non-zero offset 24 to null pointer
^
--
********************
Testing: 0.. 10.. 20.. 30.. 40.. 50.. 60.. 70.. 80.. 90..
Testing Time: 20.73s
********************
Failing Tests (2):
lld :: ELF/invalid/invalid-relocation-aarch64.test
lld :: ELF/invalid/invalid-relocation-x64.test
llvm-svn: 374329
The combination of the two flags doesn't make sense. And other linkers
seem to just ignore --export-dynamic if --relocatable is given, but
we probably should report it as an error to let users know that is
an invalid combination.
Fixes https://bugs.llvm.org/show_bug.cgi?id=43552
Differential Revision: https://reviews.llvm.org/D68441
llvm-svn: 374022
This makes it clear `ELF/**/*.cpp` files define things in the `lld::elf`
namespace and simplifies `elf::foo` to `foo`.
Reviewed By: atanasyan, grimar, ruiu
Differential Revision: https://reviews.llvm.org/D68323
llvm-svn: 373885
This allows us to delete `using namespace llvm::support::endian` and
simplify D68323. This change adds runtime config->endianness check but
the overhead should be negligible.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D68561
llvm-svn: 373884
Before, SecToClusters[*] was used to track the belonged cluster.
During a merge (From -> Into), every element of From has to be updated.
Use a union-find set to speed up this use case.
Also, replace `std::vector<int> Sections;` with a doubly-linked
pointers: int Next, Prev;
Reviewed By: Bigcheese
Differential Revision: https://reviews.llvm.org/D46228
llvm-svn: 373708
Our .interp section is not a SyntheticSection. As a result, it terminates the
loop in removeUnusedSyntheticSections(). This has at least two consequences:
- The synthetic .bss and .bss.rel.ro sections are always present in
dynamically linked executables, even when they are not needed.
- The synthetic .ARM.exidx (and possibly other) sections are always present
in partitions other than the last one, even when not needed.
.ARM.exidx in particular is problematic because it assumes that its
list of code sections is non-empty in getLinkOrderDep(), which can
lead to a crash if the partition does not have any code sections.
Fix these problems by moving the creation of the .interp sections to the
top of createSyntheticSections(). While here, make the code a little less
error-prone by changing the add() lambdas to take a SyntheticSection instead
of an InputSectionBase.
Differential Revision: https://reviews.llvm.org/D68256
llvm-svn: 373347
Merging SHF_LINK_ORDER sections can affect semantics if the sh_link
fields point to different sections.
Specifically, for SHF_LINK_ORDER sections, the sh_link field acts as a reverse
dependency from the linked section, causing the SHF_LINK_ORDER section to
be included if the linked section is included. Merging sections with different
sh_link fields will cause the entire contents of the SHF_LINK_ORDER section
to be associated with a single (arbitrarily chosen) output section, whereas the
correct semantics are for the individual pieces of the SHF_LINK_ORDER section
to be associated with their linked output sections. As a result we can end up
incorrectly dropping SHF_LINK_ORDER section contents or including the wrong
section contents, depending on which linked sections were chosen.
Differential Revision: https://reviews.llvm.org/D68094
llvm-svn: 373255
Instead of returning an optional, just return the input string if
demangling fails, as that's what all callers use anyway.
Differential Revision: https://reviews.llvm.org/D68015
llvm-svn: 373077
Fixes PR43461 (regression caused by D67504)
The partition field of a SECTIONS-specified section is not set after
D67504. The 0 value affects findSection() which checks if the partition
field is 1.
So `Out::initArray = findSection(".init_array")` is null, and
DT_INIT_ARRAYSZ is not set.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D68087
llvm-svn: 372996
The R_MIPS_JALR relocation denotes jalr/jr instructions in position
independent code. Both these instructions take a target's address from
the $25 register. If offset to the target symbol fits into the 18-bits,
it's more efficient to replace jalr/jr by bal/b instructions.
Differential Revision: https://reviews.llvm.org/D68057
llvm-svn: 372951
D64906 allows PT_LOAD to have overlapping p_offset ranges. In the
default R RX RW RW layout + -z noseparate-code case, we do not tail pad
segments when transiting to another segment. This can save at most
3*maxPageSize bytes.
a) Before D64906, we tail pad R, RX and the first RW.
b) With -z separate-code, we tail pad R and RX, but not the first RW (RELRO).
In some cases, b) saves one file page. In some cases, b) wastes one
virtual memory page. The waste is a concern on Fuchsia. Because it uses
compressed binaries, it doesn't benefit from the saved file page.
This patch adds -z separate-loadable-segments to restore the behavior before
D64906. It can affect section addresses and can thus be used as a
debugging mechanism (see PR43214 and ld.so partition bug in
crbug.com/998712).
Reviewed By: jakehehrlich, ruiu
Differential Revision: https://reviews.llvm.org/D67481
llvm-svn: 372807
Summary:
When support for ThinLTO was first added to lld, the options that
control it were prefixed with --plugin-opt= for compatibility with
an existing implementation as a linker plugin. This change enables
shorter versions of the options to be used, as follows:
New Existing
-thinlto-emit-imports-files --plugin-opt=thinlto-emit-imports-files
-thinlto-index-only --plugin-opt=thinlto-index-only
-thinlto-index-only= --plugin-opt=thinlto-index-only=
-thinlto-object-suffix-replace= --plugin-opt=thinlto-object-suffix-replace=
-thinlto-prefix-replace= --plugin-opt=thinlto-prefix-replace=
-lto-obj-path= --plugin-opt=obj-path=
The options with the --plugin-opt= prefix have been retained as aliases
for the shorter variants so that they continue to be accepted.
Reviewers: tejohnson, ruiu, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, MaskRay, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67782
llvm-svn: 372798
When /DISCARD/ is used on an input section, that input section may have
a .ARM.exidx metadata section that depends on it. As the discard handling
comes after the .ARM.exidx synthetic section is created we need to make
sure that we account for the case where the .ARM.exidx output section
should be removed because there are no more live input sections.
Differential Revision: https://reviews.llvm.org/D67848
llvm-svn: 372781
D67504 removed uses of `assigned` from OutputSection::addSection, which
makes `assigned` purely used in processSectionCommands() and its
callees. By replacing its references with `parent`, we can remove
`assigned`.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67531
llvm-svn: 372735
Fixes PR38748
mergeSections() calls getOutputSectionName() to get output section
names. Two MergeInputSections may be merged even if they are made
different by SECTIONS commands.
This patch moves mergeSections() after processSectionCommands() and
addOrphanSections() to fix the issue. The new pass is renamed to
OutputSection::finalizeInputSections().
processSectionCommands() and addorphanSections() are changed to add
sections to InputSectionDescription::sectionBases.
finalizeInputSections() merges MergeInputSections and migrates
`sectionBases` to `sections`.
For the -r case, we drop an optimization that tries keeping sh_entsize
non-zero. This is for the simplicity of addOrphanSections(). The
updated merge-entsize2.s reflects the change.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67504
llvm-svn: 372734
In case of linking binary blobs which do not have any ELF headers, we can
deduce MIPS ABI ELF header flags from an `emulation` option.
Patch by Kyle Evans.
llvm-svn: 372513
Summary:
If st_link(A)=B, and A has the SHF_LINK_ORDER flag, we may dereference
a null pointer if B is garbage collected (PR43147):
1. In Wrter.cpp:compareByFilePosition, `aOut->sectionIndex` or `bOut->sectionIndex`
2. In OutputSections::finalize, `d->getParent()->sectionIndex`
Simply error and bail out to avoid null pointer dereferences. ld.bfd has
a similar error:
sh_link of section `.bar' points to discarded section `.foo0' of `a.o'
ld.bfd is more permissive in that it just checks whether the linked-to
section of the first input section is discarded. This is likely because
it sets sh_link of the output section according to the first input
section.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67761
llvm-svn: 372400
D67284 introduced ARMErrataFix.cpp which was derived from
AArch64ErrataFix.cpp. There were some useful refactoring changes made to
ARMErrataFix.cpp made as part of the review. This change applies the
relevant changes back to AArch64ErrataFix.cpp.
Main changes are:
- Old style variable names in comments like IS, are now new style isec.
- Simplify init() collection of mappingSymbols to always start with a code
mapping symbol.
- Simplify logic in mergeCmp().
- Fix one 80 column overflow caused by IS -> isec transformation.
Differential Revision: https://reviews.llvm.org/D67622
llvm-svn: 372094
Provide a missing initializer to get rid of warning provoking buildbot
failures.
error: missing field 'rel' initializer
[-Werror,-Wmissing-field-initializers]
llvm-svn: 371970
The --fix-cortex-a8 option implements a linker workaround for the
coretex-a8 erratum 657417. A summary of the erratum conditions is:
- A 32-bit Thumb-2 branch instruction B.w, Bcc.w, BL, BLX spans two
4KiB regions.
- The destination of the branch is to the first 4KiB region.
- The instruction before the branch is a 32-bit Thumb-2 non-branch
instruction.
The linker fix is to redirect the branch to a patch not in the first
4KiB region. The patch forwards the branch on to its target.
The cortex-a8, is an old CPU, with the first implementation of this
workaround in ld.bfd appearing in 2009. The cortex-a8 has been used in
early Android Phones and there are some critical applications that still
need to run on a cortex-a8 that have the erratum. The patch is applied
roughly 10 times on LLD and 20 on Clang when they are built with
--fix-cortex-a8 on an Arm system.
The formal erratum description is avaliable in the ARM Core Cortex-A8
(AT400/AT401) Errata Notice document. This is available from Arm on
request but it seems to be findable via a web search.
Differential Revision: https://reviews.llvm.org/D67284
llvm-svn: 371965
If there is no readonly section, we map:
* The ELF header at imageBase+maxPageSize
* Program headers at imageBase+maxPageSize+sizeof(Ehdr)
* The first section .text at imageBase+maxPageSize+sizeof(Ehdr)+sizeof(program headers)
Due to the interaction between Writer<ELFT>::fixSectionAlignments and
LinkerScript::allocateHeaders,
`alignDown(p_vaddr(R PT_LOAD)) = alignDown(p_vaddr(RX PT_LOAD))`.
The RX PT_LOAD will override the R PT_LOAD at runtime, which is not ideal:
```
// PHDR at 0x401034, should be 0x400034
PHDR 0x000034 0x00401034 0x00401034 0x000a0 0x000a0 R 0x4
// R PT_LOAD contains just Ehdr and program headers.
// At 0x401000, should be 0x400000
LOAD 0x000000 0x00401000 0x00401000 0x000d4 0x000d4 R 0x1000
LOAD 0x0000d4 0x004010d4 0x004010d4 0x00001 0x00001 R E 0x1000
```
* createPhdrs allocates the headers to the R PT_LOAD.
* fixSectionAlignments assigns `imageBase+maxPageSize+sizeof(Ehdr)+sizeof(program headers)` (formula: `alignTo(dot, maxPageSize) + dot % config->maxPageSize`) to addrExpr of .text
* allocateHeaders computes the minimum address among SHF_ALLOC sections, i.e. addr(.text)
* allocateHeaders sets address of ELF header to `addr(.text)-sizeof(Ehdr)-sizeof(program headers) = imageBase+maxPageSize`
The main observation is that when the SECTIONS command is not used, we
don't have to call allocateHeaders. This requires an assumption that
the presence of PT_PHDR and addresses of headers can be decided
regardless of address information.
This may seem natural because dot is not manipulated by a linker script.
The other thing is that we have to drop the special rule for -T<section>
in `getInitialDot`. If -Ttext is smaller than the image base, the headers
will not be allocated with the old behavior (allocateHeaders is called)
but always allocated with the new behavior.
The behavior change is not a problem. Whether and where headers are
allocated can vary among linkers, or ld.bfd across different versions
(--enable-separate-code or not). It is thus advised to use a linker
script with the PHDRS command to have a consistent behavior across
linkers. If PT_PHDR is needed, an explicit --image-base can be a simpler
alternative.
Differential Revision: https://reviews.llvm.org/D67325
llvm-svn: 371957
ICF is performed after EhInputSections and MergeInputSections were
eliminated from inputSections. Every element of inputSections is an
InputSection.
llvm-svn: 371744
-z undefs is the inverse of -z defs. It allows unresolved references
from object files. This can be used to cancel --no-undefined or -z defs.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D67479
llvm-svn: 371715
```
part.phdrs = script->hasPhdrsCommands() ? script->createPhdrs() : createPhdrs(part);
```
createPhdrs() allocates a PT_PHDR and a PF_R PT_LOAD, which will be
deleted later in LinkerScript::allocateHeaders, but leave a gap between
the program headers and the first section. Don't allocate the segments
to avoid the gap. PT_INTERP is likely not needed as well.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D67324
llvm-svn: 371398
Summary:
ld.bfd produces an output with --noinhibit-exec when an ASSERT fails.
Use errorOrWarn() so that we can produce an output as well.
An interesting case is that symbol assignments may execute multiple
times, so we probably want to suppress errors for non-final runs.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D67285
llvm-svn: 371225
Recommit r370635 (reverted by r371202), with one change: move addOrphanSections() before ICF.
Before, orphan sections in two different partitions may be folded and
moved to the main partition.
Now, InputSection->OutputSection assignment for orphans happens before
ICF. ICF does not fold input sections with different output sections.
With the PR43241 reproduce,
`llvm-objcopy --extract-partition libvr.so libchrome__combined.so libvr.so` => no error
Updated description:
Fixes PR39418. Complements D47241 (the non-linker-script case).
processSectionCommands() assigns input sections to output sections.
ICF is called before it, so .text.foo and .text.bar may be folded even if
their output sections are made different by SECTIONS commands.
```
markLive<ELFT>()
doIcf<ELFT>() // During ICF, we don't know the output sections
writeResult()
combineEhSections<ELFT>()
script->processSectionCommands() // InputSection -> OutputSection assignment
```
This patch splits processSectionCommands() into processSectionCommands()
and processSymbolAssignments(), and moves
processSectionCommands()/addOrphanSections() before ICF:
```
markLive<ELFT>()
combineEhSections<ELFT>()
script->processSectionCommands()
script->addOrphanSections();
doIcf<ELFT>() // should remove folded input sections
writeResult()
script->processSymbolAssignments()
```
An alternative approach is to unfold a section `sec` in
processSectionCommands() when we find `sec` and `sec->repl` belong to
different output sections. I feel this patch is superior because this
can fold more sections and the decouple of
SectionCommand/SymbolAssignment gives flexibility:
* An ExprValue can't be evaluated before its section is assigned to an
output section -> we can delete getOutputSectionVA and simplify
another place where we had to check if the output section is null.
Moreover, a case in linkerscript/early-assign-symbol.s can be handled
now.
* processSectionCommands/processSymbolAssignments can be freely moved
around.
llvm-svn: 371216
```
Writer<ELFT>::run
assignFileOffsets
setFileOffset
computeFileOffset
os->ptLoad->p_align may be smaller than config->maxPageSize
setPhdrs
p_align = max(p_align, config->maxPageSize)
```
If we move the config->maxPageSize logic to the constructor of
PhdrEntry, computeFileOffset can be simplified.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D67211
llvm-svn: 371085
Previously, segments were aligned according to their first section's
alignment requirements. That was not correct, but segments are also
aligned to a page boundary, and a page boundary is usually much larger
than a section alignment requirement, so no one noticed this bug before.
Now, lld has --nmagic option which sets maxPageSize to 1 to effectively
disable page alignment, which reveals the issue.
Fixes https://bugs.llvm.org/show_bug.cgi?id=43212
Differential Revision: https://reviews.llvm.org/D67152
llvm-svn: 371013
Fixes PR43214.
The size of SHT_RELR may oscillate between 2 numbers (see D53003 for a
similar --pack-dyn-relocs=android issue). This can happen if the shrink
of SHT_RELR causes it to take more words to encode relocation offsets
(this can happen with thunks or segments with overlapping p_offset
ranges), and the expansion of SHT_RELR causes it to take fewer words to
encode relocation offsets.
To avoid the issue, add padding 1s to the end of the relocation section
if its size would decrease. Trailing 1s do not decode to more relocations.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D67164
llvm-svn: 370923
Non-undefined symbols with Levenshtein distance 1 or a transposition are
suggestion candidates. This is probably good enough and it can suggest
some missing/superfluous qualifiers: const, restrict, volatile, & and &&
ref-qualifier, e.g.
error: undefined symbol: foo(int*)
>>> referenced by b.o:(.text+0x1)
+>>> did you mean: foo(int const*)
+>>> defined in: a.o
error: undefined symbol: foo(int*&)
>>> referenced by b.o:(.text+0x1)
+>>> did you mean: foo(int*)
+>>> defined in: b.o
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D67039
llvm-svn: 370853
Fixes PR39418. Complements D47241 (the non-linker-script case).
processSectionCommands() assigns input sections to output sections.
ICF is called before it, so .text.foo and .text.bar may be folded even if
their output sections are made different by SECTIONS commands.
```
markLive<ELFT>()
doIcf<ELFT>() // During ICF, we don't know the output sections
writeResult()
combineEhSections<ELFT>()
script->processSectionCommands() // InputSection -> OutputSection assignment
```
This patch splits processSectionCommands() into processSectionCommands() and
processSymbolAssignments(), and moves processSectionCommands() before ICF:
```
markLive<ELFT>()
combineEhSections<ELFT>()
script->processSectionCommands()
doIcf<ELFT>() // should remove folded input sections
writeResult()
script->processSymbolAssignments()
```
An alternative approach is to unfold a section `sec` in
processSectionCommands() when we find `sec` and `sec->repl` belong to
different output sections. I feel this patch is superior because this
can fold more sections and the decouple of
SectionCommand/SymbolAssignment gives flexibility:
* An ExprValue can't be evaluated before its section is assigned to an
output section -> we can delete getOutputSectionVA and simplify
another place where we had to check if the output section is null.
Moreover, a case in linkerscript/early-assign-symbol.s can be handled
now.
* processSectionCommands/processSymbolAssignments can be freely moved
around.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D66717
llvm-svn: 370635
Fixes https://bugs.chromium.org/p/chromium/issues/detail?id=998712
SHT_LLVM_PART_EHDR marks the start of a partition. The partition
sections will be extracted to a separate file. Align to the next maximum
page size boundary so that we can find the ELF header at the start. We
cannot benefit from overlapping p_offset ranges with the previous
segment anyway.
It seems we lack some llvm-objcopy --extract-main-partition and
--extract-partition sanity checks. It may place EHDR at the start
even if p_offset if non zero. Anyway, the lld change is justified for
the reasons above.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D67032
llvm-svn: 370629
D64136 and D65584, while fixing STB_WEAK issues and improving our
compatibility with ld.bfd, can cause another STB_WEAK problem related to
LTO:
If %tundef.o has an undefined reference on f,
and %tweakundef.o has a weak undefined reference on f,
%tdef.o has a definition of f
```
ld.lld %tundef.o %tweakundef.o --start-lib %tdef.o --end-lib
```
1) `%tundef.o` doesn't set the `referenced` bit.
2) `%weakundef.o` changes the binding from STB_GLOBAL to STB_WEAK
3) `%tdef.o` is not fetched because the binding is weak.
Step (1) is incorrect. This patch sets the `referenced` bit of Undefined
created by bitcode files.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D66992
llvm-svn: 370437
Port the D64906 technique to RISC-V. It deletes 3 alignments at
PT_LOAD boundaries for the default case: the size of a RISC-V binary
decreases by at most 12kb.
llvm-svn: 370192
This essentially reverts the code change of D63132 and switches to a simpler approach.
In an executable/shared object, st_shndx of a symbol can be:
1) SHN_UNDEF: undefined symbol (or canonical PLT)
2) SHN_ABS: absolute symbol
3) any other value (usually a regular section index) represents a relative symbol.
The actual value does not matter.
Many ld.so (musl, all archs except MIPS of FreeBSD rtld-elf) even treat 2) and 3)
the same. If .sdata does not exist, it does not matter what value/section
__global_pointer$ has, as long as it is relative (otherwise there will be a pedantic
lld error. See D63132). Just set the st_shndx arbitrarily to 1.
Dummy st_shndx=1 may be used by __rela_iplt_start, linker-script-defined symbols outside a section, __dso_handle, etc.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D66798
llvm-svn: 370172
Port the D64906 technique to ARM. It deletes 3 alignments at
PT_LOAD boundaries for the default case: the size of an arm binary
decreases by at most 12kb.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D66749
llvm-svn: 370049
EhFrameSection::addSection checks liveness of FDE early. This makes it
infeasible to move combineEhSections() before ICF.
Postpone the check to EhFrameSection::finalizeContents(). This is what
ARMExidxSyntheticSection does and it will make a subsequent patch D66717
simpler.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D66727
llvm-svn: 369890
PR42990. For `SECTIONS { b = a; . = 0xff00 + (a >> 8); a = .; }`,
we currently set st_value(a)=0xff00 while st_value(b)=0xffff.
The following call tree demonstrates the problem:
```
link<ELF64LE>(Args);
Script->declareSymbols(); // insert a and b as absolute Defined
Writer<ELFT>().run();
Script->processSectionCommands();
addSymbol(cmd); // a and b are re-inserted. LinkerScript::getSymbolValue
// is lazily called by subsequent evaluation
finalizeSections();
forEachRelSec(scanRelocations<ELFT>);
processRelocAux // another problem PR42506, not affected by this patch
finalizeAddressDependentContent(); // loop executed once
script->assignAddresses(); // a = 0, b = 0xff00
script->assignAddresses(); // a = 0xff00, _end = 0xffff
```
We need another assignAddresses() to finalize the value of `a`.
This patch
1) modifies assignAddress() to track the original section/value of each
symbol and return a symbol whose section/value has changed.
2) moves the post-finalizeSections assignAddress() inside the loop
of finalizeAddressDependentContent() and makes it iterative.
Symbol assignment may not converge so we make a few attempts before
bailing out.
Note, assignAddresses() must be called at least twice. The penultimate
call finalized section addresses while the last finalized symbol values.
It is somewhat obscure and there was no comment.
linkerscript/addr-zero.test tests this.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D66279
llvm-svn: 369889
--strip-all suppresses the creation of in.symtab
This can cause a null pointer dereference in OutputSection::finalize()
// --emit-relocs => copyRelocs is true
if (!config->copyRelocs || (type != SHT_RELA && type != SHT_REL))
return;
...
link = in.symTab->getParent()->sectionIndex; // in.symTab is null
Let's just disallow the combination. In some cases the combination can
cause GNU linkers to fail:
* ld.bfd: final link failed: invalid operation
* gold: internal error in set_no_output_symtab_entry, at ../../gold/object.h:1814
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D66704
llvm-svn: 369878
Reported at https://reviews.llvm.org/D64930#1642223
If the only section of a PT_LOAD is a SHT_NOBITS section (e.g. .bss), we
may not align its sh_offset. p_offset of the PT_LOAD will be set to
sh_offset, and we will get p_offset!=p_vaddr (mod p_align). If such
executable is mapped by the Linux kernel, it will segfault.
After D64906, this may happen the non-linker script case.
The linker script case has had this issue for a long time.
This was fixed by rL321657 (but the test linkerscript/nobits-offset.s
failed to test a SHT_NOBITS section), but broken by rL345154.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D66658
llvm-svn: 369828
Building on D60557 mention the name of the linker generated contents of
the reproduce archive, response.txt and version.txt.
Also write a shorter description in the ld.lld --help that is closer to
the documentation.
Differential Revision: https://reviews.llvm.org/D66641
llvm-svn: 369762
This fixed a bug in r369488. When config->isRela is false, i->r_addend
is not initialized (see encodeDynamicReloc). So we should check
config->isRela before accessing r_addend:
- if (j - i < 3 || i->r_addend)
+ if (j - i < 3 || (config->isRela && i->r_addend != 0))
Original description:
Currently, with Android dynamic relocation packing, only relative
relocations are grouped together. This patch implements similar
packing for non-relative relocations.
The implementation groups non-relative relocations with the same
r_info and r_addend, if using RELA. By requiring a minimum group
size of 3, this achieves smaller relocation sections. Building Android
for an ARM32 device, I see the total size of /system/lib decrease by
392 KB.
Grouping by r_info also allows the runtime dynamic linker to implement
an 1-entry cache to reduce the number of symbol lookup required. With
such 1-entry cache implemented on Android, I'm seeing 10% to 20%
reduction in total time spent in runtime linker for several executables
that I tested.
As a simple correctness check, I've also built x86_64 Android and booted
successfully.
Differential Revision: https://reviews.llvm.org/D65242
Patch by Vic Yang
llvm-svn: 369507
Currently, with Android dynamic relocation packing, only relative
relocations are grouped together. This patch implements similar
packing for non-relative relocations.
The implementation groups non-relative relocations with the same
r_info and r_addend, if using RELA. By requiring a minimum group
size of 3, this achieves smaller relocation sections. Building Android
for an ARM32 device, I see the total size of /system/lib decrease by
392 KB.
Grouping by r_info also allows the runtime dynamic linker to implement
an 1-entry cache to reduce the number of symbol lookup required. With
such 1-entry cache implemented on Android, I'm seeing 10% to 20%
reduction in total time spent in runtime linker for several executables
that I tested.
As a simple correctness check, I've also built x86_64 Android and booted
successfully.
Differential Revision: https://reviews.llvm.org/D66491
Patch by Vic Yang!
llvm-svn: 369488
Ported the D64906 technique to EM_386.
If `sh_addralign(.tdata) < sh_addralign(.tbss)`,
we can potentially make `p_vaddr(PT_TLS)%p_align(PT_TLS) != 0`.
ld.so that are known to have problems if p_vaddr%p_align!=0:
* FreeBSD 13.0-CURRENT rtld-elf
* glibc https://sourceware.org/bugzilla/show_bug.cgi?id=24606
New test i386-tls-vaddr-align.s checks our workaround makes p_vaddr%p_align = 0.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D65865
llvm-svn: 369347
Ported the D64906 technique to AArch64. It deletes 3 alignments at
PT_LOAD boundaries for the default case: the size of an aarch64 binary
decreases by at most 192kb.
If `sh_addralign(.tdata) < sh_addralign(.tbss)`,
we can potentially make `p_vaddr(PT_TLS)%p_align(PT_TLS) != 0`.
ld.so that are known to have problems if p_vaddr%p_align!=0:
* musl<=1.1.22
* FreeBSD 13.0-CURRENT (and before) rtld-elf arm64
New test aarch64-tls-vaddr-align.s checks that our workaround makes p_vaddr%p_align = 0.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64930
llvm-svn: 369344
This change affects the non-linker script case (precisely, when the
`SECTIONS` command is not used). It deletes 3 alignments at PT_LOAD
boundaries for the default case: the size of a powerpc64 binary can be
decreased by at most 192kb. The technique can be ported to other
targets.
Let me demonstrate the idea with a maxPageSize=65536 example:
When assigning the address to the first output section of a new PT_LOAD,
if the end p_vaddr of the previous PT_LOAD is 0x10020, we advance to
the next multiple of maxPageSize: 0x20000. The new PT_LOAD will thus
have p_vaddr=0x20000. Because p_offset and p_vaddr are congruent modulo
maxPageSize, p_offset will be 0x20000, leaving a p_offset gap [0x10020,
0x20000) in the output.
Alternatively, if we advance to 0x20020, the new PT_LOAD will have
p_vaddr=0x20020. We can pick either 0x10020 or 0x20020 for p_offset!
Obviously 0x10020 is the choice because it leaves no gap. At runtime,
p_vaddr will be rounded down by pagesize (65536 if
pagesize=maxPageSize). This PT_LOAD will load additional initial
contents from p_offset ranges [0x10000,0x10020), which will also be
loaded by the previous PT_LOAD. This is fine if -z noseparate-code is in
effect or if we are not transiting between executable and non-executable
segments.
ld.bfd -z noseparate-code leverages this technique to keep output small.
This patch implements the technique in lld, which is mostly effective on
targets with large defaultMaxPageSize (AArch64/MIPS/PPC: 65536). The 3
removed alignments can save almost 3*65536 bytes.
Two places that rely on p_vaddr%pagesize = 0 have to be updated.
1) We used to round p_memsz(PT_GNU_RELRO) up to commonPageSize (defaults
to 4096 on all targets). Now p_vaddr%commonPageSize may be non-zero.
The updated formula takes account of that factor.
2) Our TP offsets formulae are only correct if p_vaddr%p_align = 0.
Fix them. See the updated comments in InputSection.cpp for details.
On targets that we enable the technique (only PPC64 now),
we can potentially make `p_vaddr(PT_TLS)%p_align(PT_TLS) != 0`
if `sh_addralign(.tdata) < sh_addralign(.tbss)`
This exposes many problems in ld.so implementations, especially the
offsets of dynamic TLS blocks. Known issues:
FreeBSD 13.0-CURRENT rtld-elf (i386/amd64/powerpc/arm64)
glibc (HEAD) i386 and x86_64 https://sourceware.org/bugzilla/show_bug.cgi?id=24606
musl<=1.1.22 on TLS Variant I architectures (aarch64/powerpc64/...)
So, force p_vaddr%p_align = 0 by rounding dot up to p_align(PT_TLS).
The technique will be enabled (with updated tests) for other targets in
subsequent patches.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64906
llvm-svn: 369343
After D66007/r369262, if the control flow reaches `if (sym.isUndefined())`, we know:
* The relocation is not a link-time constant => symbol is preemptable => Undefined or SharedSymbol
* Not an undef weak.
* -no-pie.
* The symbol type is neither STT_OBJECT nor STT_FUNC.
ld.lld --export-dynamic --unresolved-symbols=ignore-all %t.o can satisfy
these conditions. Delete the isUndefined() test so that we error
`symbol '...' has no type`, because we don't know the type to make the
decision to create copy relocation/canonical PLT.
llvm-svn: 369271
In processRelocAux(), we handle errors before copy relocation/canonical PLT.
This makes error checking a bit complex because we have to check for
conditions that will be allowed by copy relocation/canonical PLT.
Instead, move copy relocation/canonical PLT before error checking. This
simplifies the previous clumsy error checking code
`config->shared || (config->pie && expr == R_ABS && type != target->symbolicRel)`
to the simple `config->isPic`. Some diagnostics can be reported in
different ways. The code motion changes diagnostics for some contrived
test cases:
* copy-rel-pie-error.s -> copy-rel-pie2.s:
It was rejected before but accepted now. ld.bfd also accepts the case.
* copy-errors.s: "cannot preempt symbol" changes to "symbol 'bar' has no type"
* got32{,x}-i386.s: the suggestion changes from "-fPIC or -Wl,-z,notext" to "-fPIE"
* x86-64-dyn-rel-error5.s: one diagnostic changes for -pie case
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D66007
llvm-svn: 369262
Like rLLD354040
Previously, for unknown relocation types, in -no-pie/-pie mode, we got something like:
foo.o: unrecognized relocation ...
In -shared mode:
error: can't create dynamic relocation ... against symbol: yyy in readonly segment
Delete the default case from Hexagon::getRelExpr and add the error there. We will get consistent error message like `error: unknown relocation (1024) against symbol foo`
Reviewed By: sidneym
Differential Revision: https://reviews.llvm.org/D66275
llvm-svn: 369260
Fixes https://github.com/ClangBuiltLinux/linux/issues/640
R_PPC64_REL16_HI was incorrectly computed as an R_ABS relocation.
rLLD368964 made it a linker failure. Change it to use R_PC to fix the
failures.
Add ppc64-reloc-rel.s for these R_PPC64_REL* tests.
llvm-svn: 369184
R_GOTPLT is relative to .got.plt since D59594. Since R_HEXAGON_GOT
relocations always have 0 r_addend, they can use R_GOTPLT instead.
Reviewed By: sidneym
Differential Revision: https://reviews.llvm.org/D66274
llvm-svn: 369128
Summary:
libstdc++ in GCC 5.1 has some bugs. The move to C++14 in D66195 triggered one
such bug caused by the new constexpr support in C++14, and the implementation
doing SFINAE wrong with the comparator to std::stable_sort.
Here's a small repro: https://godbolt.org/z/2QC3-n
The fix is to inline the lambdas directly into the llvm::stable_sort call
instead of erasing them through a std::function. The code is more readable as
well.
Reviewers: thakis, ruiu, espindola
Subscribers: emaste, arichardson, MaskRay, jkorous, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66306
llvm-svn: 369023
Like rLLD354040.
Previously, for unrecognized relocation types, in -no-pie/-pie mode, we got something like:
foo.o: unrecognized relocation ...
In -shared mode:
error: can't create dynamic relocation ... against symbol: yyy in readonly segment
Delete the default case from AArch64::getRelExpr and add the error there.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D66277
llvm-svn: 368983
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368936
A new symbol is added to elf::symtab in 3 steps:
1) SymbolTable::insert creates a placeholder.
2) Symbol::mergeProperties
3) Symbol::replace
Fields referenced by steps 2) and 3) should be initialized in
SymbolTable::insert. `traced` and `referenced` were missed previously.
This did not cause problems because compilers generated code that
initialized them (bit fields) to 0.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D66130
llvm-svn: 368784
Currently the following 3 relocation types do not trigger the creation
of a canonical PLT (which changes STT_GNU_IFUNC to STT_FUNC and
redirects all references):
1) GOT-generating (`needsGot`)
2) PLT-generating (`needsPlt`)
3) R_ABS with 0 addend in a writable location. This is used for
for ifunc function pointers in writable sections such as .data and .toc.
This patch deletes case 3) to simplify the R_*_IRELATIVE generating
logic added in D57371. Other advantages:
* It is guaranteed no more than 1 R_*_IRELATIVE is created for an ifunc.
* PPC64: no need to special case ifunc in toc-indirect to toc-relative relaxation. See D65755
The deleted elf::addIRelativeRelocs demonstrates that one-pass scan
through relocations makes several optimizations difficult. This is
something we can think about in the future.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D65995
llvm-svn: 368661
In Writer::includeInDynSym(), exportDynamic is used by a Defined with
protected or default visibility, to record whether it is required to be
exported into .dynsym. It is set when any of the following conditions
hold:
1) There is an interposable symbol from a DSO (Undefined or SharedSymbol with default visibility)
2) If -shared or --export-dynamic is specified, any symbol in an object file/bitcode sets this property, unless suppressed by canBeOmittedFromSymbolTable().
3) --dynamic-list when producing an executable
4) protected symbol from a DSO preempted by copy relocation/canonical PLT when
--ignore-{data,function}-address-equality is specified
5) ifunc is exported when -z ifunc-noplt is specified
Bullet points 4) and 5) are irrelevant in this patch.
Bullet 3) does not play well with 1) and 2). When -shared is specified,
exportDynamic of most symbols is true. This makes it incapable to record
--dynamic-list marked symbols. We thus have obscure:
if (!config->shared)
b->exportDynamic = true;
else if (b->includeInDynsym())
b->isPreemptible = true;
This patch adds another bit `Symbol::inDynamicList` to record
3). We can thus simplify handleDynamicList() by unifying the DSO and
executable cases. It also allows us to simplify isPreemptible - now
the field is only used in finalizeSections() and later stages.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D66091
llvm-svn: 368659
After r367869, VER_NDX_LOCAL can only be assigned to Defined and
CommonSymbol. CommonSymbol becomes Defined after replaceCommonSymbols(),
thus `versionId == VER_NDX_LOCAL` will imply `isDefined()`.
In maybeReportUndefined(), computeBinding() is called when the symbol is
unknown to be Undefined. computeBinding() != STB_LOCAL will always be
true.
llvm-svn: 368536
!isPreemptible was added in r343668 to fix PR39104: symbols redefined by
replaceWithDefined() might be incorrectly considered STB_LOCAL if a
version script specified `local: *;`.
After r367869 (`config->defaultSymbolVersion` was removed), we will
assign VER_NDX_LOCAL to only regular Defined and CommonSymbol, not
Defined created by replaceWithDefined() (because scanVersionScript() is
called before scanRelocations()). The !isPreemptible is thus redundant
and can be deleted.
llvm-svn: 368535
If the dot gets moved by an explicit section address, an empty gap between sections could be created. The encompassing region for the section being parsed needs to be expanded to include the gap.
Differential Revision: https://reviews.llvm.org/D65722
Patch by Gabriel Smith!
llvm-svn: 368379
This ensures these errors produce a non-zero exit and improves the
context (providing the name of the input object and section being
parsed).
llvm-svn: 368378
In the case where C identifier sections have SHF_LINK_ORDER they will most
likely be placed in the same partition as the section that they are associated
with. But unless this happens to be the main partition, this will cause them
to be excluded from the range covered by the __start_ and __stop_ symbols,
which may lead to incorrect program behaviour. So we need to move them
all into the main partition so that they will be covered by the __start_
and __stop_ symbols.
We may want to refine this approach later and allow different __start_/__stop_
symbol values for different partitions. This would only make sense for
relocations from SHT_NOTE sections since they are duplicated into each
partition.
Differential Revision: https://reviews.llvm.org/D65909
llvm-svn: 368375
This patch Implements the R_AARCH64_TLSLE_MOVW_TPREL_G*[_NC]. These are
logically the same calculation as the existing TLSLE relocations with
the result written back to mov[nz] and movk instructions. A typical code
sequence is:
movz x0, #:tprel_g2:foo // bits [47:32] of R_TLS with overflow check
movk x0, #:tprel_g1_nc:foo // bits [31:16] of R_TLS with no overflow check
movk x0, #:tprel_g0_nc:foo // bits [15:0] of R_TLS with no overflow check
This type of code sequence is usually used with a large code model.
Differential Revision: https://reviews.llvm.org/D65882
Fixes: PR42853
llvm-svn: 368293
There's still a need for a deeper fix to the way libDebugInfoDWARF error
messages are propagated up to lld - if lld had exited non-zero on this
error message we would've found the issue sooner.
llvm-svn: 368229
Fixes PR42759.
```
// If ifunc is taken address in -fPIC code, it may have a toc entry
.section .toc,"aw",@progbits
.quad ifunc
// ifunc may be defined as STT_GNU_IFUNC in another object file
.type ifunc, %gnu_indirect_function
```
If ifunc is non-preemptable (e.g. when linking an executable), the toc
entry will be relocated by R_PPC64_IRELATIVE.
R_*_IRELATIVE represents the symbolic value of a
non-preemptable ifunc (not associated with a canonical PLT) in a writable location. It has an unknown value at
link time, so we cannot apply toc-indirect to toc-relative relaxation.
Reviewed By: luporl, sfertile
Differential Revision: https://reviews.llvm.org/D65755
llvm-svn: 368057
The combineEhSections runs, by design, before processSectionCommands so
that input exception sections like .ARM.exidx and .eh_frame are not assigned
to OutputSections. Unfortunately if /DISCARD/ removes InputSections that
have associated .ARM.exidx sections without discarding the .ARM.exidx
synthetic section then we will end up crashing when trying to sort the
InputSections in ascending address order.
We fix this by filtering out the sections that have been discarded prior
to processing the InputSections in finalizeContents().
fixes pr42890
Differential Revision: https://reviews.llvm.org/D65759
llvm-svn: 368041
This is a case missed by D64136. If %t1.o has a weak reference on foo,
and %t2.so has a non-weak reference on foo:
```
0. ld.lld %t1.o %t2.so # ok; STB_WEAK; accepted since D64136
1. ld.lld %t2.so %t1.o # undefined symbol: foo; STB_GLOBAL
2. gold %t1.o %t2.so # ok; STB_WEAK
3. gold %t2.so %t1.o # undefined reference to 'foo'; STB_GLOBAL
4. ld.bfd %t1.o %t2.so # undefined reference to `foo'; STB_WEAK
5. ld.bfd %t2.so %t1.o # undefined reference to `foo'; STB_WEAK
```
It can be argued that in both cases, the binding of the undefined foo
should be set to STB_WEAK, because the binding should not be affected by
referenced from shared objects.
--allow-shlib-undefined doesn't suppress errors (3,4,5), but -shared or
--noinhibit-exec allows ld.bfd/gold to produce a binary:
```
3. gold -shared %t2.so %t1.o # ok; STB_GLOBAL
4. ld.bfd -shared %t2.so %t1.o # ok; STB_WEAK
5. ld.bfd -shared %t1.o %t1.o # ok; STB_WEAK
```
If %t2.so has DT_NEEDED entries, ld.bfd will load them (lld/gold don't
have the behavior). If one of the DSO defines foo and it is in the
link-time search path (e.g. DT_NEEDED entry is an absolute path, via
-rpath=, via -rpath-link=, etc),
`ld.bfd %t1.o %t2.so` and `ld.bfd %t1.o %t2.so` will not error.
In this patch, we make Undefined and SharedSymbol share the same binding
computing logic. Case 1 will be allowed:
```
0. ld.lld %t1.o %t2.so # ok; STB_WEAK; accepted since D64136
1. ld.lld %t2.so %t1.o # ok; STB_WEAK; changed by this patch
```
In the future, we can explore the option that turns both (0,1) into
errors if --no-allow-shlib-undefined (default when linking an
executable) is in action.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D65584
llvm-svn: 368038
We prioritize non-* wildcards overs VER_NDX_LOCAL/VER_NDX_GLOBAL "*".
This patch generalizes the rule to "*" of other versions and thus fixes PR40176.
I don't feel strongly about this GNU linkers' behavior but the
generalization simplifies code.
Delete `config->defaultSymbolVersion` which was used to special case
VER_NDX_LOCAL/VER_NDX_GLOBAL "*".
In `SymbolTable::scanVersionScript`, custom versions are handled the same
way as VER_NDX_LOCAL/VER_NDX_GLOBAL. So merge
`config->versionScript{Locals,Globals}` into `config->versionDefinitions`.
Overall this seems to simplify the code.
In `SymbolTable::assign{Exact,Wildcard}Versions`,
`sym->verdefIndex == config->defaultSymbolVersion` is changed to
`verdefIndex == UINT32_C(-1)`.
This allows us to give duplicate assignment diagnostics for
`{ global: foo; };` `V1 { global: foo; };`
In test/linkerscript/version-script.s:
vs_index of an undefined symbol changes from 0 to 1. This doesn't matter (arguably 1 is better because the binding is STB_GLOBAL) because vs_index of an undefined symbol is ignored.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D65716
llvm-svn: 367869
An R_*_IRELATIVE represents the address of a STT_GNU_IFUNC symbol
(redirected at runtime) which is non-preemptable and is not associated
with a canonical PLT (associated with a symbol with a section index of
SHN_UNDEF but a non-zero st_value).
.rel[a].plt [DT_JMPREL, DT_JMPREL+DT_JMPRELSZ) contains relocations that
can be lazily resolved. R_*_IRELATIVE are always eagerly resolved, so
conceptually they do not belong to .rela.plt. "iplt" is mostly a misnomer.
glibc powerpc and powerpc64 do not resolve R_*_IRELATIVE if they are in .rela.plt.
// a.o - synthesized PLT call stub has an R_*_IRELATIVE
void ifunc(); int main() { ifunc(); }
// b.o
static void real() {}
asm (".type ifunc, %gnu_indirect_function");
void *ifunc() { return ℜ }
The lld-linked executable crashes. ld.bfd places R_*_IRELATIVE in
.rela.dyn and the executable works.
glibc i386, x86_64, and aarch64 have logic
(glibc/sysdeps/*/dl-machine.h:elf_machine_lazy_rel) to eagerly resolve
R_*_IRELATIVE in .rel[a].plt so the lld-linked executable works.
Move R_*_IRELATIVE from .rel[a].plt to .rel[a].dyn to fix the crashes on
glibc powerpc/powerpc64. This also helps simplifying ifunc
implementation in FreeBSD rtld-elf powerpc64.
If --pack-dyn-relocs=android[+relr] is specified, the Android packed
dynamic relocation format is used for .rela.dyn. We cannot name
in.relaIplt ".rela.dyn" because the output section will have mixed
formats. This can be improved in the future.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D65651
llvm-svn: 367745
1. raw_ostream supports ANSI colors so that you can write messages to
the termina with colors. Previously, in order to change and reset
color, you had to call `changeColor` and `resetColor` functions,
respectively.
So, if you print out "error: " in red, for example, you had to do
something like this:
OS.changeColor(raw_ostream::RED);
OS << "error: ";
OS.resetColor();
With this patch, you can write the same code as follows:
OS << raw_ostream::RED << "error: " << raw_ostream::RESET;
2. Add a boolean flag to raw_ostream so that you can disable colored
output. If you disable colors, changeColor, operator<<(Color),
resetColor and other color-related functions have no effect.
Most LLVM tools automatically prints out messages using colors, and
you can disable it by passing a flag such as `--disable-colors`.
This new flag makes it easy to write code that works that way.
Differential Revision: https://reviews.llvm.org/D65564
llvm-svn: 367649
This patch
1) adds -z separate-code and -z noseparate-code (default).
2) changes the condition that the last page of last PF_X PT_LOAD is
padded with trap instructions.
Current condition (after D33630): if there is no `SECTIONS` commands.
After this change: if -z separate-code is specified.
-z separate-code was introduced to ld.bfd in 2018, to place the text
segment in its own pages. There is no overlap in pages between an
executable segment and a non-executable segment:
1) RX cannot load initial contents from R or RW(or non-SHF_ALLOC).
2) R and RW(or non-SHF_ALLOC) cannot load initial contents from RX.
lld's current status:
- Between R and RX: in `Writer<ELFT>::fixSectionAlignments()`, the start of a
segment is always aligned to maxPageSize, so the initial contents loaded by R
and RX do not overlap. I plan to allow overlaps in D64906 if -z noseparate-code
is in effect.
- Between RX and RW(or non-SHF_ALLOC if RW doesn't exist):
we currently unconditionally pad the last page to commonPageSize
(defaults to 4096 on all targets we support).
This patch will make it effective only if -z separate-code is specified.
-z separate-code is a dubious feature that intends to reduce the number
of ROP gadgets (which is actually ineffective because attackers can find
plenty of gadgets in the text segment, no need to find gadgets in
non-code regions).
With the overlapping PT_LOAD technique D64906, -z noseparate-code
removes two more alignments at segment boundaries than -z separate-code.
This saves at most defaultCommonPageSize*2 bytes, which are significant
on targets with large defaultCommonPageSize (AArch64/MIPS/PPC: 65536).
Issues/feedback on alignment at segment boundaries to help understand
the implication:
* binutils PR24490 (the situation on ld.bfd is worse because they have
two R-- on both sides of R-E so more alignments.)
* In binutils, the 2018-02-27 commit "ld: Add --enable-separate-code" made -z separate-code the default on Linux.
d969dea983
In musl-cross-make, binutils is configured with --disable-separate-code
to address size regressions caused by -z separate-code. (lld actually has the same
issue, which I plan to fix in a future patch. The ld.bfd x86 status is
worse because they default to max-page-size=0x200000).
* https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=237676 people want
smaller code size. This patch will remove one alignment boundary.
* Stef O'Rear: I'm opposed to any kind of page alignment at the
text/rodata line (having a partial page of text aliased as rodata and
vice versa has no demonstrable harm, and I actually care about small
systems).
So, make -z noseparate-code the default.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64903
llvm-svn: 367537
That allows to remove duplicated code which subtracts 0x7000 from the
R_MIPS_TLS_TPREL_XXX relocations values in the `MIPS::relocateOne`
function.
llvm-svn: 366888
This ports r366573 from COFF to ELF.
There are now to toString(Archive::Symbol), one doing MSVC demangling
in COFF and one doing Itanium demangling in ELF, so rename these two
to toCOFFString() and to toELFString() to not get a duplicate symbol.
Nothing ever passes a raw Archive::Symbol to CHECK(), so these not
being part of the normal toString() machinery seems ok.
There are two code paths in the ELF linker that emits this type of
diagnostic:
1. The "normal" one in InputFiles.cpp. This is covered by the tweaked test.
2. An additional one that's only used for libcalls if there's at least
one bitcode in the link, and if the libcall symbol is lazy, and
lazily loaded from an archive (i.e. not from a lazy .o file).
(This code path was added in r339301.) Since all libcall names so far
are C symbols and never mangled, the change there is not observable
and hence not covered by tests.
Differential Revision: https://reviews.llvm.org/D65095
llvm-svn: 366836
lld currently selects the relocation model automatically depending on
the link flags specified, but in some cases it'd be useful to allow
explicitly overriding the relocation model using a flag.
llvm-svn: 366644
It's possible to create IR that uses !associated to refer to a global that
appears later in the module, which can result in these types of forward
references being generated. Unfortunately our assembler does not currently
accept the resulting .s so I needed to use yaml2obj to test this.
Differential Revision: https://reviews.llvm.org/D64880
llvm-svn: 366460
When code relaxation is enabled many RISC-V fixups are not resolved but
instead relocations are emitted. This happens even for DWARF debug
sections. Therefore, to properly support the parsing of DWARF debug info
we need to be able to resolve RISC-V relocations. This patch adds:
* Support for RISC-V relocations in RelocationResolver
* DWARF support for two relocations per object file offset
* DWARF changes to support relocations in more DIE fields
The two relocations per offset change is needed because some RISC-V
relocations (used for label differences) come in pairs.
Relocations can also be emitted for DWARF fields where relocations were
not yet evaluated. Adding relocation support for some of these fields is
essencial. On the other hand, LLVM currently emits RISC-V relocations
for fixups that could be safely evaluated, since they can never be
affected by code relaxations. This patch also adds relocation support
for the fields affected by those extraneous relocations (the DWARF unit
entry Length, and the DWARF debug line entry TotalLength and
PrologueLength), for testing purposes.
Differential Revision: https://reviews.llvm.org/D62062
Patch by Luís Marques.
llvm-svn: 366402
Summary:
Add a --vs-diagnostics flag that alters the format of diagnostic output
to enable source hyperlinks in Visual Studio.
Differential Revision: https://reviews.llvm.org/D58484
Reviewed by: ruiu
llvm-svn: 366333
Summary:
After D58892 split the RW PT_LOAD on the PT_GNU_RELRO boundary, the new
layout is:
PT_LOAD(PT_GNU_RELRO(.data.rel.ro .bss.rel.ro)) PT_LOAD(.data. .bss)
The two pageAlign() calls at PT_GNU_RELRO boundaries are redundant due
to the existence of PT_LOAD.
Reviewers: grimar, peter.smith, ruiu, espindola
Reviewed By: ruiu
Subscribers: sfertile, atanasyan, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64854
llvm-svn: 366307
In LLDB, when parsing type units, we don't need to parse the whole line
table. Instead, we only need to parse the "support files" from the line
table prologue.
To make that possible, this patch moves the respective functions from
the LineTable into the Prologue. Because I don't think users of the
LineTable should have to know that these files come from the Prologue,
I've left the original methods in place, and made them redirect to the
LineTable.
Differential revision: https://reviews.llvm.org/D64774
llvm-svn: 366164
This removes a call to `object::getSymbol<ELFT>`.
We used this function in a next way: it was given an
array of symbols and index and returned either a symbol
at the index given or a error.
This function was removed in D64631.
(rL366052, but was reverted because of LLD compilation error
that I didn't know about).
It does not make much sense to keep this function on LLVM side
only for LLD, because having only a list of symbols and the index it
is not able to produce a valueable error message about context anyways.
llvm-svn: 366057
This fixes PR38549, which is silently accepted by ld.bfd.
This seems correct because it makes sense to let non-glob patterns take
precedence over glob patterns.
lld issues an error because
`assignWildcardVersion(ver, VER_NDX_LOCAL);` is processed before `assignExactVersion(ver, v.id, v.name);`.
Move all assignWildcardVersion() calls after assignExactVersion() calls
to fix this.
Also, move handleDynamicList() to the bottom. computeBinding() called by
includeInDynsym() has this cryptic rule:
if (versionId == VER_NDX_LOCAL && isDefined() && !isPreemptible)
return STB_LOCAL;
Before the change:
* foo's version is set to VER_NDX_LOCAL due to `local: *`
* handleDynamicList() is called
- foo.computeBinding() is STB_LOCAL
- foo.includeInDynsym() is false
- foo.isPreemptible is not set (wrong)
* foo's version is set to V1
After the change:
* foo's version is set to VER_NDX_LOCAL due to `local: *`
* foo's version is set to V1
* handleDynamicList() is called
- foo.computeBinding() is STB_GLOBAL
- foo.includeInDynsym() is true
- foo.isPreemptible is set (correct)
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64550
llvm-svn: 365760
In lvm2, libdevmapper.so is linked with a version script with duplicate
version assignments:
DM_1_02_138 { global: ... dm_bitset_parse_list; ... };
DM_1_02_129 { global: ... dm_bitset_parse_list; ... };
ld.bfd silently accepts this while gold issues a warning. We currently
error, thus inhibit producing the executable. Change the error to
warning to allow this case, and improve the message.
There are some cases where ld.bfd error
`anonymous version tag cannot be combined with other version tags`
but we just warn. It is probably OK for now.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D64549
llvm-svn: 365759
This patch does the same thing as r365595 to other subdirectories,
which completes the naming style change for the entire lld directory.
With this, the naming style conversion is complete for lld.
Differential Revision: https://reviews.llvm.org/D64473
llvm-svn: 365730
D64130 introduced a bug described in the following message:
https://reviews.llvm.org/D64130#1571560
The problem can happen with the following script:
SECTIONS {
.out : {
...
FILL(0x10101010)
*(.aaa)
...
}
The current code tries to read (0x10101010) as an expression and
does not break when meets *, what results in a script parsing error.
In this patch, I verify that FILL command's expression always wrapped in ().
And at the same time =<fillexp> expression can be both wrapped or unwrapped.
I checked it matches to bfd/gold.
Differential revision: https://reviews.llvm.org/D64476
llvm-svn: 365635
This patch is mechanically generated by clang-llvm-rename tool that I wrote
using Clang Refactoring Engine just for creating this patch. You can see the
source code of the tool at https://reviews.llvm.org/D64123. There's no manual
post-processing; you can generate the same patch by re-running the tool against
lld's code base.
Here is the main discussion thread to change the LLVM coding style:
https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html
In the discussion thread, I proposed we use lld as a testbed for variable
naming scheme change, and this patch does that.
I chose to rename variables so that they are in camelCase, just because that
is a minimal change to make variables to start with a lowercase letter.
Note to downstream patch maintainers: if you are maintaining a downstream lld
repo, just rebasing ahead of this commit would cause massive merge conflicts
because this patch essentially changes every line in the lld subdirectory. But
there's a remedy.
clang-llvm-rename tool is a batch tool, so you can rename variables in your
downstream repo with the tool. Given that, here is how to rebase your repo to
a commit after the mass renaming:
1. rebase to the commit just before the mass variable renaming,
2. apply the tool to your downstream repo to mass-rename variables locally, and
3. rebase again to the head.
Most changes made by the tool should be identical for a downstream repo and
for the head, so at the step 3, almost all changes should be merged and
disappear. I'd expect that there would be some lines that you need to merge by
hand, but that shouldn't be too many.
Differential Revision: https://reviews.llvm.org/D64121
llvm-svn: 365595
GCC emits warning on this line:
error: enumeral and non-enumeral type in conditional
expression [-Werror=extra]
Change-Id: I04969cc32e27e310968b88ebaa4e1c4894528d74
llvm-svn: 365434
With this, `clang-cl /source-charset:utf-16 test.cc` now prints `invalid
value 'utf-16' in '/source-charset:utf-16'` instead of `invalid value
'utf-16' in '-finput-charset=utf-16'` before, and several other clang-cl
flags produce much less confusing output as well.
Fixes PR29106.
Since an arg and its alias can have different arg types (joined vs not)
and different values (because of AliasArgs<>), I chose to give the Alias
its own Arg object. For convenience, I just store the alias directly in
the unaliased arg – there aren't many arg objects at runtime, so that
seems ok.
Finally, I changed Arg::getAsString() to use the alias's representation
if it's present – that function was already documented as being the
suitable function for diagnostics, and most callers already used it for
diagnostics.
Implementation-wise, Arg::accept() previously used to parse things as
the unaliased option. The core of that switch is now extracted into a
new function acceptInternal() which parses as the _aliased_ option, and
the previously-intermingled unaliasing is now done as an explicit step
afterwards.
(This also changes one place in lld that didn't use getAsString() for
diagnostics, so that that one place now also prints the flag as the user
wrote it, not as it looks after it went through unaliasing.)
Differential Revision: https://reviews.llvm.org/D64253
llvm-svn: 365413
Since OPT_UNKNOWN args never have any values and consist only of
spelling (and are never aliased), this doesn't make any difference in
practice, but it's more consistent with Arg's guidance to use
getAsString() for diagnostics, and it matches what clang does.
Also tweak two tests to use an unknown option that contains '=' for
additional coverage while here. (The new tests pass fine with the old
code too though.)
llvm-svn: 365200
This fixes an 8-year-old regression. r105763 made it so that aliases
always refer to the unaliased option – but it missed the "joined" branch
of JoinedOrSeparate flags. (r162231 then made the Args classes
non-virtual, and r169344 moved them from clang to llvm.)
Back then, there was no JoinedOrSeparate flag that was an alias, so it
wasn't observable. Now /U in CLCompatOptions is a JoinedOrSeparate alias
in clang, and warn_slash_u_filename incorrectly used the aliased arg id
(using the unaliased one isn't really a regression since that warning
checks if the undefined macro contains slash or backslash and only then
emits the warning – and no valid use will pass "-Ufoo/bar" or similar).
Also, lld has many JoinedOrSeparate aliases, and due to this bug it had
to explicitly call `getUnaliasedOption()` in a bunch of places, even
though that shouldn't be necessary by design. After this fix in Option,
these calls really don't have an effect any more, so remove them.
No intended behavior change.
(I accidentally fixed this bug while working on PR29106 but then
wondered why the warn_slash_u_filename broke. When I figured it out, I
thought it would make sense to land this in a separate commit.)
Differential Revision: https://reviews.llvm.org/D64156
llvm-svn: 365186
The difference from D63432/r365015 is that this patch does not place
SHF_STRINGS sections with different alignments into the same
MergeSyntheticSection. Doing that would:
(1) create unnecessary padding and thus waste space.
Add a test tail-merge-string-align2.s to check no extra padding is created.
(2) make some input sections unaligned when tail merge (-O2) is enabled.
The alignment of MergeTailAlignment::Builder was out of sync in D63432.
MOVAPS on such unaligned strings can raise SIGSEGV.
This should fix PR42289: the Linux kernel has a use case that input
files have .rodata.cst32 sections with different alignments. The
expectation (and what ld.bfd and gold do) is that in the -r link, there
is only one .rodata.cst32 (SHF_MERGE sections with different alignments
can be combined), but lld currently creates one for each different
alignment.
The current merging strategy:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize and
sh_addralign). Merging is performed among a group, even if -O0 is specified.
2) Create one output section for each group. This is a special case in
addInputSec().
This patch changes 1) to:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize).
Merging is performed among a group, even if -O0 is specified.
We will thus create just one .rodata.cst32 . This also improves merging
efficiency when sections with the same name but different alignments are
combined.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D64200
llvm-svn: 365139
If %t1.o has a weak reference on foo, and %t2.so has a non-weak
reference on foo: `ld.lld %t1.o %t2.so -o %t`
We incorrectly set the binding of the undefined foo to STB_GLOBAL.
Fix this by ignoring undefined symbols in a SharedFile for Undefined and
SharedSymbol.
This fixes the binding of pthread_once when the program links against
both librt.so and libpthread.so
```
a.o: STB_WEAK reference to pthread_once
librt.so: STB_GLOBAL reference to pthread_once # should be ignored
libstdc++.so: STB_WEAK reference to pthread_once # should be ignored
libgcc_s.so.1: STB_WEAK reference to pthread_once # should be ignored
```
The STB_GLOBAL pthread_once issue (not fixed by D63974) can cause a link error when the result
DSO is used to link another DSO with -z defs if -lpthread is not specified. (libstdc++.so.6 not having a dependency on libpthread.so is a really nasty hack...)
We happened to create a weak undef before D63974 because libgcc_s.so.1
was linked the last and it changed the binding again to weak.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64136
llvm-svn: 365129
The referenced symbol is expected to point to an R_RISCV_*_HI20
relocation. An absolute symbol has no associated section, therefore
there cannot be a matching R_RISCV_*_HI20.
This fixes the crash reported by PR42038. For reference, ld.bfd errors:
(.init+0x4): dangerous relocation: %pcrel_lo missing matching %pcrel_hi
Differential Revision: https://reviews.llvm.org/D63273
llvm-svn: 365049
This reverts r365015.
David Zarzycki reported this change broke stage2 and stage3 tests. The
root cause is still not very clear, but I guess some SHF_MERGE sections
with the same name have different alignments. They were not merged
before but were merged after r365015.
Something that assumes address uniqueness of such mergeable data caused
the bug.
llvm-svn: 365048
gcc may generate .debug_info/.debug_aranges/.debug_line/etc that are
relocated by R_RISCV_ADD*/R_RISCV_SUB* pairs.
Allow R_RISCV_ADD in non-SHF_ALLOC section to fix link errors like:
ld.lld: error: print.c:(.debug_frame+0x60): has non-ABS relocation R_RISCV_ADD64 against symbol '.L0 '
Differential Revision: https://reviews.llvm.org/D63259
llvm-svn: 365035
This should fix PR42289: the Linux kernel has a use case that input
files have .rodata.cst32 sections with different alignments. The
expectation (and what ld.bfd and gold do) is that in the -r link, there
is only one .rodata.cst32 (SHF_MERGE sections with different alignments
can be combined), but lld currently creates one for each different
alignment.
The current merging strategy:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize and
sh_addralign). String merging is performed among a group, even if -O0 is specified.
2) Create one output section for each group. This is a special case in
addInputSec().
This patch changes 1) to:
1) Group SHF_MERGE sections by (name, sh_flags, sh_entsize).
String merging is performed among a group, even if -O0 is specified.
We will thus create just one .rodata.cst32 . This also improves merging
efficiency when sections with the same name but different alignments are
combined.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63432
llvm-svn: 365015
Some variables in lld have the same name as functions ignoring case.
This patch gives them different names, so that my next patch is easier
to read.
llvm-svn: 365003
This matches the wasm lld and GNU ld behavior.
The ELF linker has special handling for bitcode archives but if that
doesn't kick in we probably want to error out rather than silently
ignore the library.
Differential Revision: https://reviews.llvm.org/D63781
llvm-svn: 364998
Add Triple::riscv64 and Triple::riscv32 to getBitcodeMachineKind for get right
e_machine during LTO.
Reviewed By: ruiu, MaskRay
Differential Revision: https://reviews.llvm.org/D52165
llvm-svn: 364996
Fixes PR42442
t.o has a STB_GLOBAL undef ref to f
t2.so has a STB_WEAK undef ref to f
t1.so defines f
ld.lld t.o t1.so t2.so currently sets the binding of `f` to STB_WEAK.
This is not correct because there exists a STB_GLOBAL undef ref from a
regular object. The problem is that resolveUndefined() doesn't check
if the undef ref is seen for the first time:
if (isShared() || isLazy() || (isUndefined() && Other.Binding != STB_WEAK))
Binding = Other.Binding;
The isShared() condition should be `isShared() && !Referenced`
where Referenced is set to true after an undef ref is seen.
In practice, when linking a pthread program with glibc:
// a.o
#include <pthread.h>
pthread_mutex_t mu = PTHREAD_MUTEX_INITIALIZER;
int main() { pthread_mutex_unlock(&mu); }
{clang,gcc} -fuse-ld=lld a.o -lpthread # libpthread.so is linked before libgcc_s.so.1
The weak undef pthread_mutex_unlock in libgcc_s.so.1 makes the result
weak, which diverges from GNU linkers where STB_DEFAULT is used:
23: 0000000000000000 0 FUNC WEAK DEFAULT UND pthread_mutex_lock
(Note, if -pthread is used instead, libpthread.so will be linked **after**
libgcc_s.so.1 . lld sets the binding to the expected STB_GLOBAL)
Similar linking sequences (ld.lld t.o t1.so t2.so) appear to be used by
Go, which cause a build error https://github.com/golang/go/issues/31912.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D63974
llvm-svn: 364913
RISC-V psABI doesn't specify TLS relaxation. It can be handled the same
way as we handle ARM TLS. RISC-V TLS is even simpler because GD/LD use
the same relocation type.
Reviewed By: jrtc27, ruiu
Differential Revision: https://reviews.llvm.org/D63220
llvm-svn: 364813
* Handle initial relocation types: R_RISCV_CALL_PLT and R_RISCV_GOT_HI20.
* Produce dynamic relocation types: R_RISCV_COPY, R_RISCV_RELATIVE, R_RISCV_JUMP_SLOT.
* Define SymbolRel as R_RISCV_{32,64}
* Generate PLT header: it is used by lazy binding PLT in glibc.
* R_RISCV_CALL is changed from R_PC to R_PC_PLT. If the target symbol is preemptable, this will suppress an unnecessary "canonical PLT".
This behavior is different from ld.bfd but it is agreed the current lld behavior is favored.
I have received positive responses from the binutils maintainer that the ABI/binutils implementation can be improved, see:
https://github.com/riscv/riscv-elf-psabi-doc/issues/98https://sourceware.org/bugzilla/show_bug.cgi?id=24685
Many -no-pie/-pie/-shared programs linked against musl or glibc should work with this patch.
Reviewed By: jrtc27
Differential Revision: https://reviews.llvm.org/D63076
llvm-svn: 364812
If .rela.plt is mentioned in a linker script, it might be preserved
even if it is empty. In that case, LLD created DT_JMPREL and DT_PLTGOT
dynamic tags. When the tags exist, a dynamic loader writes values into
reserved slots in .got.plt to support lazy symbol resolution.
The problem is that, in fact, the linker has not reserved that space,
and the writing may occur into the memory allocated for something else.
Differential Revision: https://reviews.llvm.org/D63869
llvm-svn: 364639
This restores r361830 "[ELF] Error on relocations to STT_SECTION symbols if the sections were discarded"
and dependent commits (r362218, r362497) which were reverted by r364321, with a fix of a --gdb-index issue.
.rela.debug_ranges contains relocations of range list entries:
// start address of a range list entry
// old: 0; after r361830: 0
00000000000033a0 R_X86_64_64 .text._ZN2v88internal7Isolate7factoryEv + 0
// end address of a range list entry
// old: 0xe; after r361830: 0
00000000000033a8 R_X86_64_64 .text._ZN2v88internal7Isolate7factoryEv + e
If both start and end addresses of a range list entry resolve to 0,
DWARFDebugRangeList::isEndOfListEntry() will return true, then the
.debug_range decoding loop will terminate prematurely:
while (true) {
decode StartAddress
decode EndAddress
if (Entry.isEndOfListEntry()) // prematurely
break;
Entries.push_back(Entry);
}
In lld/ELF/SyntheticSections.cpp, readAddressAreas() will read
incomplete address ranges and the resulting .gdb_index will be
incomplete. For files that gdb hasn't loaded their debug info, gdb uses
.gdb_index to map addresses to CUs. The absent entries make gdb fail to
symbolize some addresses.
To address this issue, we simply allow relocations to undefined symbols
in DWARF.cpp:findAux() and let RelocationResolver resolve them.
This patch should fix:
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190603/659848.html
[2] https://bugs.chromium.org/p/chromium/issues/detail?id=978067
llvm-svn: 364391
(In effect, reverting "[ELF] Error on relocations to STT_SECTION symbols if the sections were discarded".)
It caused debug info problems in LibreOffice [1] and Chromium/V8 [2].
Reverting until those can be fixed.
It also reverts r362497 "STT_SECTION symbol should be defined" on .eh_frame, .debug*, .zdebug* and .gcc_except_table"
which was landed as a follow-up to the above.
> With -r or --emit-relocs, we warn `STT_SECTION symbol should be defined`
> on relocations to discarded section symbol. This was added as an error
> in rLLD319404, but was not so effective before D61583 (it turned the
> error to a warning).
>
> Relocations from .eh_frame .debug* .zdebug* .gcc_except_table to
> discarded .text are very common and somewhat expected. Don't warn/error
> on them. As a reference, ld.bfd has a similar logic in
> _bfd_elf_default_action_discarded() to allow these cases.
>
> Delete invalid-undef-section-symbol.test because what it intended to
> check is now covered by the updated comdat-discarded-reloc.s
>
> Delete relocatable-eh-frame.s because we allow relocations from
> .eh_frame as a special case now.
And finally it reverts r362218 "[ELF] Replace a dead test in getSymVA() with assert()"
as that also depended on the main change reverted here.
> Symbols relative to discarded comdat sections are Undefined instead of
> Defined now (after D59649 and D61583). The `== &InputSection::Discarded`
> test becomes dead. I cannot find a test related to this behavior.
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190603/659848.html
[2] https://bugs.chromium.org/p/chromium/issues/detail?id=978067
llvm-svn: 364321
r360841 introduced CommonSymbol class. An unintended behavioral change
introduced by that change was that common symbols are not internalized
by LTO under some condition. This patch fixes that issue.
The issue occurred under the following condition:
1. There exists a common symbol
2. At least one DSO is given to lld or -pie is used
If the above conditions are met, Symbol::includeInDynsym() returned a
wrong value for a common symbol.
Fixes https://bugs.llvm.org/show_bug.cgi?id=41978
Differential Revision: https://reviews.llvm.org/D63752
llvm-svn: 364273
Similar to R_AARCH64_ABS32, R_PPC64_ADDR32 can represent either a signed
value or unsigned value, thus we should use `[-2**(n-1), 2**n)` instead of
`[-2**(n-1), 2**(n-1))` to check overflows.
The issue manifests as a bogus linker error when linking the powerpc64le Linux kernel.
The new behavior is compatible with ld.bfd's complain_overflow_bitfield.
The upper bound of the error message is not correct. Fix it as well.
The changes to R_PPC_ADDR16, R_PPC64_ADDR16, R_X86_64_8 and R_X86_64_16 are similar.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63690
llvm-svn: 364164
Summary:
Our rule to create R_*_RELATIVE for absolute relocation types were
loose. D63121 made it stricter but it failed to create R_*_RELATIVE for
R_ARM_TARGET1 and R_PPC64_TOC. rLLD363236 worked around that by
reinstating the original behavior for ARM and PPC64.
This patch is an attempt to simplify the logic.
Note, in ld.bfd, R_ARM_TARGET2 --target2=abs also creates
R_ARM_RELATIVE. This seems a very uncommon scenario (moreover,
--target2=got-rel is the default), so I do not implement any logic
related to it.
Also, delete R_AARCH64_ABS32 from AArch64::getDynRel. We don't have
working ILP32 support yet. Allowing it would create an incorrect
R_AARCH64_RELATIVE.
For MIPS, the (if SymbolRel, then RelativeRel) code is to keep its
behavior unchanged.
Note, in ppc64-abs64-dyn.s, R_PPC64_TOC gets an incorrect addend because
computeAddend() doesn't compute the correct address. We seem to have the
wrong behavior for a long time. The important thing seems that a dynamic
relocation R_PPC64_TOC should not be created as the dynamic loader will
error R_PPC64_TOC is not supported.
Reviewers: atanasyan, grimar, peter.smith, ruiu, sfertile, espindola
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63383
llvm-svn: 363928
Sid Manning