This patch adds the `llvm_omp_target_dynamic_shared_alloc` function to
the `omp.h` header file so users can access it by default. Also changed
the name to keep it consistent with the other target allocators. Added
some documentation so users know how to use it. Didn't add the interface
for Fortran since there's no way to test it right now.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D123246
In SupportAndFAQ.rst, add blank lines before and after a bullet list and
sublist. This avoids an "Unepxected indentation" warning.
In Runtimes.rst, adjust the suggestion for setting LIBOMPTARGET_INFO.
The right shifts are not necessary as the bit mask values are already
correct.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D119595
The 'bug49779.cpp' test has been failing recently. This is because the
runtime is sufficiently complex when using nested parallelism without
optimizations that the CUDA tools cannot statically determine the stack
size. Because of this the kernel can exceed the thread stack size and
crash. Work around this using the 'LIBOMPTARGET_STACK_SIZE' environment
variable and add an FAQ entry for this situation.
Fixes#53670
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D119357
Patch originally by Giorgis Georgakoudis (@ggeorgakoudis), typos and
bugs introduced later by me.
This patch allows us to remove redundant barriers if they are part
of a "consecutive" pair of barriers in a basic block with no impacted
memory effect (read or write) in-between them. Memory accesses to
local (=thread private) or constant memory are allowed to appear.
Technically we could also allow any other memory that is not used to
share information between threads, e.g., the result of a malloc that
is also not captured. However, it will be easier to do more reasoning
once the code is put into an AA. That will also allow us to look through
phis/selects reasonably. At that point we should also deal with calls,
barriers in different blocks, and other complexities.
Differential Revision: https://reviews.llvm.org/D118002
This patch changes the error message to instead mention the
documentation page for the debugging options provided by libomptarget
and the bitcode runtimes. Add some extra information to the documentation to
help users more quickly identify debugging resources.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D118626
Atomic handling of map clauses was introduced to comply with the OpenMP
standard (see D104418). However, many apps won't need this feature which
can be costly in certain situations. To allow for applications to
opt-out we now introduce the `LIBOMPTARGET_MAP_FORCE_ATOMIC` environment
flag that voids the atomicity guarantee of the standard for map clauses
again, shifting the burden to the user.
This patch also de-duplicates the code that introduces the events used
to enforce atomicity as a cleanup.
Differential Revision: https://reviews.llvm.org/D117627
This patch allows the user to request all resources of a particular
layer (or core-attribute). The syntax of KMP_HW_SUBSET is modified
so the number of units requested is optional or can be replaced with an
'*' character.
e.g., KMP_HW_SUBSET=c:intel_atom@3 will use all the cores after offset 3
e.g., KMP_HW_SUBSET=*c:intel_core will use all the big cores
e.g., KMP_HW_SUBSET=*s,*c,1t will use all the sockets, all cores per
each socket and 1 thread per core.
Differential Revision: https://reviews.llvm.org/D115826
Allow filtering of resources based on core attributes. There are two new
attributes added:
1) Core Type (intel_atom, intel_core)
2) Core Efficiency (integer) where the higher the efficiency, the more
performant the core
On hybrid architectures , e.g., Alder Lake, users can specify
KMP_HW_SUBSET=4c:intel_atom,4c:intel_core to select the first four Atom
and first four Big cores. The can also use the efficiency syntax. e.g.,
KMP_HW_SUBSET=2c:eff0,2c:eff1
Differential Revision: https://reviews.llvm.org/D114901
[NFC] As part of using inclusive language within the llvm project,
this patch replaces master with main when referring to `.chm` files.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D113299
Add documentation for the debugging features in the OpenMP device
runtime library.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D112010
Add a FAQ entry about the names of openmp offloading components
and how they are searched for.
Reviewed By: jhuber6
Differential Revision: https://reviews.llvm.org/D109619
This patch adds support for using dynamic shared memory in the new
device runtime. The new function `__kmpc_get_dynamic_shared` will return a
pointer to the buffer of dynamic shared memory. Currently the amount of memory
allocated is set by an environment variable.
In the future this amount will be added to the amount used for the smart stack
which will be configured in a similar way.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D110006
We peform runtime folding, but do not currently emit remarks when it is
performed. This is because it comes from the runtime library and is
beyond the users control. However, people may still wish to view this
and similar information easily, so we can enable this behaviour using a
special flag to enable verbose remarks.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D109627
This patch implements Clang support for an original OpenMP extension
we have developed to support OpenACC: the `ompx_hold` map type
modifier. The next patch in this series, D106510, implements OpenMP
runtime support.
Consider the following example:
```
#pragma omp target data map(ompx_hold, tofrom: x) // holds onto mapping of x
{
foo(); // might have map(delete: x)
#pragma omp target map(present, alloc: x) // x is guaranteed to be present
printf("%d\n", x);
}
```
The `ompx_hold` map type modifier above specifies that the `target
data` directive holds onto the mapping for `x` throughout the
associated region regardless of any `target exit data` directives
executed during the call to `foo`. Thus, the presence assertion for
`x` at the enclosed `target` construct cannot fail. (As usual, the
standard OpenMP reference count for `x` must also reach zero before
the data is unmapped.)
Justification for inclusion in Clang and LLVM's OpenMP runtime:
* The `ompx_hold` modifier supports OpenACC functionality (structured
reference count) that cannot be achieved in standard OpenMP, as of
5.1.
* The runtime implementation for `ompx_hold` (next patch) will thus be
used by Flang's OpenACC support.
* The Clang implementation for `ompx_hold` (this patch) as well as the
runtime implementation are required for the Clang OpenACC support
being developed as part of the ECP Clacc project, which translates
OpenACC to OpenMP at the directive AST level. These patches are the
first step in upstreaming OpenACC functionality from Clacc.
* The Clang implementation for `ompx_hold` is also used by the tests
in the runtime implementation. That syntactic support makes the
tests more readable than low-level runtime calls can. Moreover,
upstream Flang and Clang do not yet support OpenACC syntax
sufficiently for writing the tests.
* More generally, the Clang implementation enables a clean separation
of concerns between OpenACC and OpenMP development in LLVM. That
is, LLVM's OpenMP developers can discuss, modify, and debug LLVM's
extended OpenMP implementation and test suite without directly
considering OpenACC's language and execution model, which can be
handled by LLVM's OpenACC developers.
* OpenMP users might find the `ompx_hold` modifier useful, as in the
above example.
See new documentation introduced by this patch in `openmp/docs` for
more detail on the functionality of this extension and its
relationship with OpenACC. For example, it explains how the runtime
must support two reference counts, as specified by OpenACC.
Clang recognizes `ompx_hold` unless `-fno-openmp-extensions`, a new
command-line option introduced by this patch, is specified.
Reviewed By: ABataev, jdoerfert, protze.joachim, grokos
Differential Revision: https://reviews.llvm.org/D106509
This patch adds support for two environment variables to configure the device.
``LIBOMPTARGET_STACK_SIZE`` sets the amount of memory in bytes that each thread
has for its stack. ``LIBOMPTARGET_HEAP_SIZE`` sets the amount of heap memory
that can be allocated using malloc / free on the device.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D106627
This patch begins adding documentation for each remark emitted by
`openmp-opt`. This builds on the IDs introduced in D105939 so that users
can more easily identify each remark in the webpage.
Depends on D105939.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D106018
This patch adds documentation for using the CMake find module for OpenMP
target offloading provided by LLVM. It also removes the requirement for
AMD's architecture to be set as this isn't necessary for upstream LLVM.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D105051
Add some information about the optimizations currently provided by
OpenMPOpt. Every optimization performed should eventually be listed
here.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D105050
For example, without this patch:
```
$ cat test.c
int main() {
int x;
#pragma omp target enter data map(alloc: x)
#pragma omp target exit data map(release: x)
;
return 0;
}
$ clang -fopenmp -fopenmp-targets=nvptx64-nvidia-cuda test.c
$ LIBOMPTARGET_DEBUG=1 ./a.out |& grep 'Creating\|Mapping exists'
Libomptarget --> Creating new map entry with HstPtrBegin=0x00007ffcace8e448, TgtPtrBegin=0x00007f12ef600000, Size=4, Name=unknown
Libomptarget --> Mapping exists with HstPtrBegin=0x00007ffcace8e448, TgtPtrBegin=0x00007f12ef600000, Size=4, updated RefCount=1
```
There are two problems in this example:
* `RefCount` is not reported when a mapping is created, but it might
be 1 or infinite. In this case, because it's created by `omp target
enter data`, it's 1. Seeing that would make later `RefCount`
messages easier to understand.
* `RefCount` is still 1 at the `omp target exit data`, but it's
reported as `updated`. The reason it's still 1 is that, upon
deletions, the reference count is generally not updated in
`DeviceTy::getTgtPtrBegin`, where the report is produced. Instead,
it's zeroed later in `DeviceTy::deallocTgtPtr`, where it's actually
removed from the mapping table.
This patch makes the following changes:
* Report the reference count when creating a mapping.
* Where an existing mapping is reported, always report a reference
count action:
* `update suppressed` when `UpdateRefCount=false`
* `incremented`
* `decremented`
* `deferred final decrement`, which replaces the misleading
`updated` in the above example
* Add comments to `DeviceTy::getTgtPtrBegin` to explain why it does
not zero the reference count. (Please advise if these comments miss
the point.)
* For unified shared memory, don't report confusing messages like
`RefCount=` or `RefCount= updated` given that reference counts are
irrelevant in this case. Instead, just report `for unified shared
memory`.
* Use `INFO` not `DP` consistently for `Mapping exists` messages.
* Fix device table dumps to print `INF` instead of `-1` for an
infinite reference count.
Reviewed By: jhuber6, grokos
Differential Revision: https://reviews.llvm.org/D104559
Add an FAQ entry and add a few lines to an existing one. Document
the use of `GCC_INSTALL_PREFIX` for pointing clang to correct
GCC installation for two-stage build.
Reviewed By: jhuber6
Differential Revision: https://reviews.llvm.org/D104474
This patch adds an information flag that indicated when data is being copied to
and from the device. This will be helpful for finding redundant or unnecessary
data transfers in applications.
Reviewed By: jdoerfert, grokos
Differential Revision: https://reviews.llvm.org/D103927
Summary:
This patch adds a new runtime function __tgt_set_info_flag that allows the
user to set the information level at runtime without using the environment
variable. Using this will require an extern function, but will eventually be
added into an auxilliary library for OpenMP support functions.
This patch required moving the current InfoLevel to a global variable which must
be instantiated by each plugin.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D100774
Summary:
This patch adds a feature to print information whenever the host-device pointer
mapping table is changed by inserting or removing an entry. This introduces a
new bit field for LIBOMPTARGET_INFO at position 0x8.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D100600
Summary:
Remove some of the error messages printed when the CUDA plugin fails. The current error messages can be confusing because they are the first error messages printed after the async stream finds an error. This means that the printed values aren't related to what caused the issue, but are simply the last asyncronous operation that succeeded on the device. Remove these as they can be misleading.
Reviewers: jdoerfert
Differential Revision: https://reviews.llvm.org/D99510
Added release note for new `deviceRTLs` and hidden helper task for LLVM
12.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D95584
Link error occurred when time profiling in libomp is enabled by default
because `libomp` is assumed to be a C library but the dependence on
`libLLVMSupport` for profiling is a C++ library. Currently the issue blocks all
OpenMP tests in Phabricator.
This patch set a new CMake option `OPENMP_ENABLE_LIBOMP_PROFILING` to
enable/disable the feature. By default it is disabled. Note that once time
profiling is enabled for `libomp`, it becomes a C++ library.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D95585
This introduces a remote offloading plugin for libomptarget. This
implementation relies on gRPC and protobuf, so this library will only
build if both libraries are available on the system. The corresponding
server is compiled to `openmp-offloading-server`.
This is a large change, but the only way to split this up is into RTL/server
but I fear that could introduce an inconsistency amongst them.
Ideally, tests for this should be added to the current ones that but that is
problematic for at least one reason. Given that libomptarget registers plugin
on a first-come-first-serve basis, if we wanted to offload onto a local x86
through a different process, then we'd have to either re-order the plugin list
in `rtl.cpp` (which is what I did locally for testing) or find a better
solution for runtime plugin registration in libomptarget.
Differential Revision: https://reviews.llvm.org/D95314
Add extra information to the runtime page describing the error messages and add information to the release notes for clang 12.0
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D94562
Add an example to the OpenMP Documentation on the LIBOMPTARGET_INFO environment variable
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D94246
Add support to the OpenMP web pages for environment variables supported
by Libomptarget and their usage.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D93723
When setting `LLVM_ENABLE_RUNTIMES`, lower case word should be used;
otherwise, it can cause a CMake error that specific path is not found.
Reviewed By: ye-luo
Differential Revision: https://reviews.llvm.org/D93719
After some issues about building runtimes along with LLVM were fixed,
building an OpenMP offloading capable compiler is pretty simple. This patch updates
the FAQ part in the doc.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D93671
Joseph Huber