The bug report:
https://bugs.llvm.org/show_bug.cgi?id=36036
...requests a DAG change for this, but an IR canonicalization
probably handles most cases. If we still want to match this
pattern in the backend, there's a proposal for that too:
D47831
Alive proofs including nsw/nuw cases that were first noted in:
D46988
https://rise4fun.com/Alive/Kmp
This patch is largely copied from the existing code that was
initially added with:
D40984
...but I didn't see much gain from trying to share code.
llvm-svn: 334137
Fixes terrible code on targets without f16 support. The
legalization creates a mess that is difficult to recover
from. Also should avoid randomly breaking these tests
multiple times in sequence in future commits.
Some regressions in cases where it happens to be better
to pull the source modifier after the conversion.
llvm-svn: 334132
Summary:
This is [[ https://bugs.llvm.org/show_bug.cgi?id=37603 | PR37603 ]].
https://godbolt.org/g/VCMNpShttps://rise4fun.com/Alive/idM
When doing bit manipulations, it is quite common to calculate some bit mask,
and apply it to some value via `and`.
The typical C code looks like:
```
int mask_signed_add(int nbits) {
return (1 << nbits) - 1;
}
```
which is translated into (with `-O3`)
```
define dso_local i32 @mask_signed_add(int)(i32) local_unnamed_addr #0 {
%2 = shl i32 1, %0
%3 = add nsw i32 %2, -1
ret i32 %3
}
```
But there is a second, less readable variant:
```
int mask_signed_xor(int nbits) {
return ~(-(1 << nbits));
}
```
which is translated into (with `-O3`)
```
define dso_local i32 @mask_signed_xor(int)(i32) local_unnamed_addr #0 {
%2 = shl i32 -1, %0
%3 = xor i32 %2, -1
ret i32 %3
}
```
Since we created such a mask, it is quite likely that we will use it in `and` next.
And then we may get rid of `not` op by folding into `andn`.
But now that i have actually looked:
https://godbolt.org/g/VTUDmU
_some_ backend changes will be needed too.
We clearly loose `bzhi` recognition.
Reviewers: spatel, craig.topper, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47428
llvm-svn: 334127
Summary:
In D47428, i propose to choose the `~(-(1 << nbits))` as the canonical form of low-bit-mask formation.
As it is seen from these tests, there is a reason for that.
AArch64 currently better handles `~(-(1 << nbits))`, but not the more traditional `(1 << nbits) - 1` (sic!).
The other way around for X86.
It would be much better to canonicalize.
This patch is completely monkey-typing.
I don't really understand how this works :)
I have based it on `// x & (-1 >> (32 - y))` pattern.
Also, when we only have `BMI`, i wonder if we could use `BEXTR` with `start=0` ?
Related links:
https://bugs.llvm.org/show_bug.cgi?id=36419https://bugs.llvm.org/show_bug.cgi?id=37603https://bugs.llvm.org/show_bug.cgi?id=37610https://rise4fun.com/Alive/idM
Reviewers: craig.topper, spatel, RKSimon, javed.absar
Reviewed By: craig.topper
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D47453
llvm-svn: 334125
These encodings correspond to the cases in the normal encoding scheme where there is no index and our modrm reading code initially decodes it as such. The VSIB handling code tried to compensate for this, but failed to add the base needed to make later code do the right thing.
Fixes PR37712.
llvm-svn: 334121
The index size is represented by the letter after the 'v'. The number represents the memory size. If an 'x' appears after the number its means the index register can be from VR128X/VR256X instead of VR128/VR256.
As vy512mem uses a VR256X index it should have an x.
And vz256mem uses a VR512 index so it shouldn't have an x.
I admit these names kind of suck and are confusing.
llvm-svn: 334120
As detailed on Agner's Microarchitecture doc (21.8 AMD Bobcat and Jaguar pipeline - Dependency-breaking instructions), all these instructions are dependency breaking and zero the destination register.
llvm-svn: 334119
Summary:
This change uses fmf subflags to guard optimizations as well as unsafe. These changes originated from D46483.
It contains only context for fsqrt.
Reviewers: spatel, hfinkel, arsenm
Reviewed By: spatel
Subscribers: hfinkel, wdng, andrew.w.kaylor, wristow, efriedma, nemanjai
Differential Revision: https://reviews.llvm.org/D47749
llvm-svn: 334113
Make TII isCopyInstr() return MachineOperands through pointer to pointer
instead via reference.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D47364
llvm-svn: 334105
If no alignment is set, the abi/preferred alignment of structs will be
used which may be higher than required. This can lead to extra padding
and in the end an increase in data size.
Differential Revision: https://reviews.llvm.org/D47633
llvm-svn: 334099
We should never get different CodeGen based on whether the code is being
compiled in debug mode so we must skip over @llvm.dbg.value (and similar)
calls.
Should fix at least the worst part of PR37690.
llvm-svn: 334090
Only the bottom 16-bits of BEXTR's control op are required (0:8 INDEX, 15:8 LENGTH).
Differential Revision: https://reviews.llvm.org/D47690
llvm-svn: 334083
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
Add minimal support to lower function calls.
Support only functions with arguments/return that go through registers
and have type i32.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D45627
llvm-svn: 334071
Fuchsia doesn't use __clear_cache, instead it provide zx_cache_flush
system call. Use it to flush instruction cache.
Differential Revision: https://reviews.llvm.org/D47753
llvm-svn: 334068
This is a fix for the problem arising in D47374 (PR37678):
https://bugs.llvm.org/show_bug.cgi?id=37678
We may not have throughput info because it's not specified in the model
or it's not available with variant scheduling, so assume that those
instructions can execute/complete at max-issue-width.
Differential Revision: https://reviews.llvm.org/D47723
llvm-svn: 334055
Summary: As it turns out, the lowering for the Mips16* family of target is the exact same thing as what the ops expands to, so the code handling them can be removed and the ops only enabled for the MipsSE* family of targets.
Reviewers: smaksimovic, atanasyan, abeserminji
Subscribers: sdardis, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D47703
llvm-svn: 334052
CodeGenPrepare pass move extension instructions close to load instructions in different BB, so they can be combined later. But the extension instructions can't move through logical and shift instructions in current implementation. This patch enables this enhancement, so we can eliminate more extension instructions.
Differential Revision: https://reviews.llvm.org/D45537
This is re-commit of r331783, which was reverted by r333305. The performance regression was caused by some unlucky alignment, not a code generation problem.
llvm-svn: 334049
There was only one place in the entire codebase where a non
default value was being passed, and that place was already hidden
in an implementation file. So we can delete the extra parameter
and all existing clients continue to work as they always have,
while making the interface a bit simpler.
Differential Revision: https://reviews.llvm.org/D47789
llvm-svn: 334046
Preserves the low bound of the !range. I don't think
it's legal to do anything with the top half since it's
theoretically reading garbage.
llvm-svn: 334045
Summary: This change uses fmf subflags to guard optimizations as well as unsafe. These changes originated from D46483.
Reviewers: spatel, hfinkel
Reviewed By: spatel
Subscribers: nemanjai
Differential Revision: https://reviews.llvm.org/D47389
llvm-svn: 334037
Similar to v4i32 SHL, convert v8i16 shift amounts to scale factors instead to improve performance and reduce instruction count. We were already doing this for constant shifts, this adds variable shift support.
Reduces the serial nature of the codegen, which relies on chains of plendvb/pand+pandn+por shifts.
This is a step towards adding support for vXi16 vector rotates.
Differential Revision: https://reviews.llvm.org/D47546
llvm-svn: 334023
Summary:
Allow extended parsing of variable assembler assignment syntax and modify X86 to permit
VAR = register assignment. As we emit these as .set directives when possible, we inline
such expressions in output assembly.
Fixes PR37425.
Reviewers: rnk, void, echristo
Reviewed By: rnk
Subscribers: nickdesaulniers, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D47545
llvm-svn: 334022
When legalizing illegal FP load results, this was
for some reason dropping the invariant and dereferencable
memory flags. There doesn't seem to be any reason for this,
and the equivalent isn't done for integer loads.
Fixes an issue in a future AMDGPU commit where some identical
loads fail to merge because one of the loads ends up
dropping the flags.
llvm-svn: 334020
When adjusting a cmp in order to canonicalize an abs/nabs select pattern we need
to use the type of the existing operand when creating a new operand not the
type of a select operand, as the two may be different.
This fixes PR37686.
llvm-svn: 334019
BitPermutationSelector builds the output value by repeating rotate-and-mask instructions with input registers.
Here, we may avoid one rotate instruction if we start building from an input register that does not require rotation.
For example of the test case bitfieldinsert.ll, it first rotates left r4 by 8 bits and then inserts some bits from r5 without rotation.
This can be executed by one rlwimi instruction, which rotates r4 by 8 bits and inserts its bits into r5.
This patch adds a check for rotation amounts in the comparator used in sorting to process the input without rotation first.
Differential Revision: https://reviews.llvm.org/D47765
llvm-svn: 334011
Ideally we'd use resolveTargetShuffleInputs to handle faux shuffles as well but:
(a) that code path doesn't handle general/pre-legalized ops/types very well.
(b) I'm concerned about the compute time as they recurse to calls to computeKnownBits/ComputeNumSignBits which would need depth limiting somehow.
llvm-svn: 334007
Summary:
Bringing some come duplicated in the AT&T and the Intel printers
into a common parent class.
Reviewers: craig.topper
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D47682
llvm-svn: 334005
When the branch target of a Thumb2 unconditional or conditonal branch is
resolved at assembly time, no range checking is performed on the result
leading to incorrect immediates. This change adds a range check:
+- 16 Megabytes for unconditional branches, +- 1 Megabyte for the
conditional branch.
Differential Revision: https://reviews.llvm.org/D46306
llvm-svn: 333997
The Thumb BL range is + or - either 16 Megabytes or 4 Megabytes depending
on whether the CPU supports Thumb2 or the v8-m baseline ops. The existing
check for BL range is incorrectly set at +- 32 Megabytes. This change
corrects the higher range and uses the lower range if the featurebits
don't have the necessary support for it.
Differential Revision: https://reviews.llvm.org/D46305
llvm-svn: 333991
This is the new version of D46181, allowing setjmp/longjmp
to work correctly with the Intel CET shadow stack by storing
SSP on setjmp and fixing it on longjmp. The patch has been
updated to use the cf-protection-return module flag instead
of HasSHSTK, and the bug that caused D46181 to be reverted
has been fixed with the test expanded to track that fix.
patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D47311
llvm-svn: 333990
Passing -mattr=-mmx needs to disable these instructions since the MMX register class won't have been set up. But we don't want -mattr=-mmx to disable SSE so we have to do it separately.
llvm-svn: 333984
RegAlloc keeps a insertion-time ordered map of evictee information,
but we only use membership. Replace MapVector with contextually
equivalent DenseMap which is smaller and faster.
llvm-svn: 333981
Start by emitting remarks for very basic unsupported cases such as
irreducible CFGs and EHFunclets. The end goal is to be able to cover all
the cases where we give up with an explanation.
llvm-svn: 333972
We already output true and false in the printer, but the parser isn't able to
read it.
Differential Revision: https://reviews.llvm.org/D47424
llvm-svn: 333970
Code review feedback from r328123 prefers copying the few feature test
macros used by Demangle into there, rather than sinking the header into
an odd corner like Demangle.
llvm-svn: 333965
Sanjay Patel