We can prove that a 'sub' can be a 'sub nsw' under certain conditions:
- The sign bits of the operands is the same.
- Both operands have more than 1 sign bit.
The subtraction cannot be a signed overflow in either case.
llvm-svn: 216037
Previously, the hint mechanism relied on clean up passes to remove redundant
metadata, which still showed up if running opt at low levels of optimization.
That also has shown that multiple nodes of the same type, but with different
values could still coexist, even if temporary, and cause confusion if the
next pass got the wrong value.
This patch makes sure that, if metadata already exists in a loop, the hint
mechanism will never append a new node, but always replace the existing one.
It also enhances the algorithm to cope with more metadata types in the future
by just adding a new type, not a lot of code.
llvm-svn: 215994
- add check for volatile (probably unneeded, but I agree that we should be conservative about it).
- strengthen condition from isUnordered() to isSimple(), as I don't understand well enough Unordered semantics (and it also matches the comment better this way) to be confident in the previous behaviour (thanks for catching that one, I had missed the case Monotonic/Unordered).
- separate a condition in two.
- lengthen comment about aliasing and loads
- add tests in GVN/atomic.ll
llvm-svn: 215943
While this might seem like an obvious canonicalization, there is one subtle problem with it. The result of the original expression
is undef when x is NaN (remember, fast math flags), but the result of the select is always defined when x is NaN. This means that the
new expression is strictly more defined than the original one. One unfortunate consequence of this is that the transform is not reversible!
It's always legal to make increase the defined-ness of an expression, but it's not legal to reduce it. Thus, targets that prefer the original
form of the expression cannot reverse the transform to recover it. Another way to think of it is that the transform has lost source-level
information (the fast math flags), which is undesirable.
llvm-svn: 215825
We can combne a mul with a div if one of the operands is a multiple of
the other:
%mul = mul nsw nuw %a, C1
%ret = udiv %mul, C2
=>
%ret = mul nsw %a, (C1 / C2)
This can expose further optimization opportunities if we end up
multiplying or dividing by a power of 2.
Consider this small example:
define i32 @f(i32 %a) {
%mul = mul nuw i32 %a, 14
%div = udiv exact i32 %mul, 7
ret i32 %div
}
which gets CodeGen'd to:
imull $14, %edi, %eax
imulq $613566757, %rax, %rcx
shrq $32, %rcx
subl %ecx, %eax
shrl %eax
addl %ecx, %eax
shrl $2, %eax
retq
We can now transform this into:
define i32 @f(i32 %a) {
%shl = shl nuw i32 %a, 1
ret i32 %shl
}
which gets CodeGen'd to:
leal (%rdi,%rdi), %eax
retq
This fixes PR20681.
llvm-svn: 215815
When a call site with noalias metadata is inlined, that metadata can be
propagated directly to the inlined instructions (only those that might access
memory because it is not useful on the others). Prior to inlining, the noalias
metadata could express that a call would not alias with some other memory
access, which implies that no instruction within that called function would
alias. By propagating the metadata to the inlined instructions, we preserve
that knowledge.
This should complete the enhancements requested in PR20500.
llvm-svn: 215676
When preserving noalias function parameter attributes by adding noalias
metadata in the inliner, we should do this for general function calls (not just
memory intrinsics). The logic is very similar to what already existed (except
that we want to add this metadata even for functions taking no relevant
parameters). This metadata can be used by ModRef queries in the caller after
inlining.
This addresses the first part of PR20500. Adding noalias metadata during
inlining is still turned off by default.
llvm-svn: 215657
v2: continue iterating through the rest of the bb
use for loop
v3: initialize FlattenCFG pass in ScalarOps
add test
v4: split off initializing flattencfg to a separate patch
add comment
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
llvm-svn: 215574
attribute and function argument attribute synthesizing and propagating.
As with the other uses of this attribute, the goal remains a best-effort
(no guarantees) attempt to not optimize the function or assume things
about the function when optimizing. This is particularly useful for
compiler testing, bisecting miscompiles, triaging things, etc. I was
hitting specific issues using optnone to isolate test code from a test
driver for my fuzz testing, and this is one step of fixing that.
llvm-svn: 215538
Correctness proof of the transform using CVC3-
$ cat t.cvc
A, B : BITVECTOR(32);
QUERY BVXOR(A | B, BVXOR(A,B) ) = A & B;
$ cvc3 t.cvc
Valid.
llvm-svn: 215524
What follows bellow is a correctness proof of the transform using CVC3.
$ < t.cvc
A, B : BITVECTOR(32);
QUERY BVPLUS(32, A & B, A | B) = BVPLUS(32, A, B);
$ cvc3 < t.cvc
Valid.
llvm-svn: 215400
and the lattice will be updated to be a state other than "undefined". This
limiation could miss some opportunities of lowering "overdefined" to be an
even accurate value. So this patch ask the algorithm to try to lower the
lattice value again even if the value has been lowered to be "overdefined".
llvm-svn: 215343
GlobalOpt didn't know how to simulate InsertValueInst or
ExtractValueInst. Optimizing these is pretty straightforward.
N.B. This came up when looking at clang's IRGen for MS ABI member
pointers; they are represented as aggregates.
llvm-svn: 215184
this case, the code path dealing with vector promotion was missing the explicit
checks for lifetime intrinsics that were present on the corresponding integer
promotion path.
llvm-svn: 215148
Optimize the following IR:
%1 = tail call noalias i8* @calloc(i64 1, i64 4)
%2 = bitcast i8* %1 to i32*
; This store is dead and should be removed
store i32 0, i32* %2, align 4
Memory returned by calloc is guaranteed to be zero initialized. If the value being stored is the constant zero (and the store is not otherwise observable across threads), we can delete the store. If the store is to an out of bounds address, it is undefined and thus also removable.
Reviewed By: nicholas
Differential Revision: http://reviews.llvm.org/D3942
llvm-svn: 214897
Some types, such as 128-bit vector types on AArch64, don't have any callee-saved registers. So if a value needs to stay live over a callsite, it must be spilled and refilled. This cost is now taken into account.
llvm-svn: 214859
When the cost model determines vectorization is not possible/profitable these remarks print an analysis of that decision.
Note that in selectVectorizationFactor() we can assume that OptForSize and ForceVectorization are mutually exclusive.
Reviewed by Arnold Schwaighofer
llvm-svn: 214599
The current remark is ambiguous and makes it sounds like explicitly specifying vectorization will allow the loop to be vectorized. This is not the case. The improved remark directs the user to -Rpass-analysis=loop-vectorize to determine the cause of the pass-miss.
Reviewed by Arnold Schwaighofer`
llvm-svn: 214445
We can only propagate the nsw bits if both subtraction instructions are
marked with the appropriate bit.
N.B. We only propagate the nsw bit in InstCombine because the nuw case
is already handled in InstSimplify.
This fixes PR20189.
llvm-svn: 214385
If the NUW bit is set for 0 - Y, we know that all values for Y other
than 0 would produce a poison value. This allows us to replace (0 - Y)
with 0 in the expression (X - (0 - Y)) which will ultimately leave us
with X.
This partially fixes PR20189.
llvm-svn: 214384
Before this patch we had
@a = weak global ...
but
@b = alias weak ...
The patch changes aliases to look more like global variables.
Looking at some really old code suggests that the reason was that the old
bison based parser had a reduction for alias linkages and another one for
global variable linkages. Putting the alias first avoided the reduce/reduce
conflict.
The days of the old .ll parser are long gone. The new one parses just "linkage"
and a later check is responsible for deciding if a linkage is valid in a
given context.
llvm-svn: 214355
While we can already transform A | (A ^ B) into A | B, things get bad
once we have (A ^ B) | (A ^ B ^ Cst) because reassociation will morph
this into (A ^ B) | ((A ^ Cst) ^ B). Our existing patterns fail once
this happens.
To fix this, we add a new pattern which looks through the tree of xor
binary operators to see that, in fact, there exists a redundant xor
operation.
What follows bellow is a correctness proof of the transform using CVC3.
$ cat t.cvc
A, B, C : BITVECTOR(64);
QUERY BVXOR(A, B) | BVXOR(BVXOR(B, C), A) = BVXOR(A, B) | C;
QUERY BVXOR(BVXOR(A, C), B) | BVXOR(A, B) = BVXOR(A, B) | C;
QUERY BVXOR(A, B) & BVXOR(BVXOR(B, C), A) = BVXOR(A, B) & ~C;
QUERY BVXOR(BVXOR(A, C), B) & BVXOR(A, B) = BVXOR(A, B) & ~C;
$ cvc3 < t.cvc
Valid.
Valid.
Valid.
Valid.
llvm-svn: 214342
The lifetime intrinsics need some work in order to make it clear which
optimizations are or are not valid.
For now dropping this optimization avoids a miscompilation.
Patch by Björn Steinbrink.
llvm-svn: 214336
The test being performed is just an approximation anyway, so it really
shouldn't crash when things don't go entirely as expected.
Should fix PR20474.
llvm-svn: 214177
This is the first commit in a series that add an @llvm.assume intrinsic which
can be used to provide the optimizer with a condition it may assume to be true
(when the control flow would hit the intrinsic call). Some basic properties are added here:
- llvm.invariant(true) is dead.
- llvm.invariant(false) is unreachable (this directly corresponds to the
documented behavior of MSVC's __assume(0)), so is llvm.invariant(undef).
The intrinsic is tagged as writing arbitrarily, in order to maintain control
dependencies. BasicAA has been updated, however, to return NoModRef for any
particular location-based query so that we don't unnecessarily block code
motion.
llvm-svn: 213973
This functionality is currently turned off by default.
Part of the motivation for introducing scoped-noalias metadata is to enable the
preservation of noalias parameter attribute information after inlining.
Sometimes this can be inferred from the code in the caller after inlining, but
often we simply lose valuable information.
The overall process if fairly simple:
1. Create a new unqiue scope domain.
2. For each (used) noalias parameter, create a new alias scope.
3. For each pointer, collect the underlying objects. Add a noalias scope for
each noalias parameter from which we're not derived (and has not been
captured prior to that point).
4. Add an alias.scope for each noalias parameter from which we might be
derived (or has been captured before that point).
Note that the capture checks apply only if one of the underlying objects is not
an identified function-local object.
llvm-svn: 213949
Jiangning Liu