They can be deleted or replicated, so the cache may become outdated.
They only need to be visited once during frame lowering, so just scan
the function instead.
llvm-svn: 279297
Improved handling of fma, floating point min/max, additional load/store
instructions for floating point types.
Patch by Jyotsna Verma.
llvm-svn: 279239
The names of the tablegen defs now match the names of the ISD nodes.
This makes the world a slightly saner place, as previously "fround" matched
ISD::FP_ROUND and not ISD::FROUND.
Differential Revision: https://reviews.llvm.org/D23597
llvm-svn: 279129
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
This adds two new utility functions findLoopControlBlock and findLoopPreheader
to MachineLoop and MachineLoopInfo. These functions are refactored and taken
from the Hexagon target as they are target independent; thus this is intendend to
be a non-functional change.
Differential Revision: https://reviews.llvm.org/D22959
llvm-svn: 278661
LowerTargetConstantPool is not properly setting the TargetFlag to indicate
desired relocation. Coding error, the offset parameter was omitted, so the
TargetFlag was used as the offset, and the TargetFlag defaulted to zero.
This only affects -fpic compilation, and only those items created in a
Constant Pool, for example a vector of constants. Halide ran into this issue.
llvm-svn: 278614
Remove all ilist_iterator to pointer casts. There were two reasons for
casts:
- Checking for an uninitialized (i.e., null) iterator. I added
MachineInstrBundleIterator::isValid() to check for that case.
- Comparing an iterator against the underlying pointer value while
avoiding converting the pointer value to an iterator. This is
occasionally necessary in MachineInstrBundleIterator, since there is
an assertion in the constructors that the underlying MachineInstr is
not bundled (but we don't care about that if we're just checking for
pointer equality).
To support the latter case, I rewrote the == and != operators for
ilist_iterator and MachineInstrBundleIterator.
- The implicit constructors now use enable_if to exclude
const-iterator => non-const-iterator conversions from overload
resolution (previously it was a compiler error on instantiation, now
it's SFINAE).
- The == and != operators are now global (friends), and are not
templated.
- MachineInstrBundleIterator has overloads to compare against both
const_pointer and const_reference. This avoids the implicit
conversions to MachineInstrBundleIterator that assert, instead just
checking the address (and I added unit tests to confirm this).
Notably, the only remaining uses of ilist_iterator::getNodePtrUnchecked
are in ilist.h, and no code outside of ilist*.h directly relies on this
UB end-iterator-to-pointer conversion anymore. It's still needed for
ilist_*sentinel_traits, but I'll clean that up soon.
llvm-svn: 278478
From the point of view of register assignment, byval parameters are
ignored: a byval parameter is not going to be assigned to a register,
and it will not affect the assignments of subsequent parameters.
When matching registers with parameters in the bit tracker, make sure
to skip byval parameters before advancing the registers.
llvm-svn: 278375
Check for end() before skipping through debug values. This avoids
dereferencing end() when the instruction is the final one in the basic
block. (It still assumes that a debug value will not be the final
instruction in the basic block. No tests seemed to violate that.)
Many Hexagon tests trigger this, but they happen to magically pass right
now. I found this because WIP patches for PR26753 convert them into
crashes.
llvm-svn: 278355
Floating point instructions use general purpose registers, so the few
instructions that can put floating point immediates into registers are,
in fact, integer instruction. Use them explicitly instead of having
pseudo-instructions specifically for dealing with floating point values.
Simplify the constant loading instructions (from sdata) to have only two:
one for 32-bit values and one for 64-bit values: CONST32 and CONST64.
llvm-svn: 278244
When the same base address is used to load two different data types, LSR
would assume a memory type of "void". This type is not sized and has no
alignment information. Checking for it causes a crash.
llvm-svn: 277601
Identify patterns where the address is aligned to an 8-byte boundary,
but both the base address and the constant offset are both proper
multiples of 4. In such cases, extract Base+4 into a separate instruc-
tion, and use S2_storerd_io, instead of using S4_storerd_rr.
llvm-svn: 277497
Scavenging slots were only reserved when pseudo-instruction expansion in
frame lowering created new virtual registers. It is possible to still
need a scavenging slot even if no virtual registers were created, in cases
where the stack is large enough to overflow instruction offsets.
llvm-svn: 277355
The DAG combiner tries to merge stores to adjacent vector wide memory
locations by creating stores which are integral multiples of the vector
width. Discourage this by informing it that this is slow. This should
not affect legalization passes, because all of them ignore the "Fast"
argument.
Patch by Pranav Bhandarkar.
llvm-svn: 277178
Software pipelining is an optimization for improving ILP by
overlapping loop iterations. Swing Modulo Scheduling (SMS) is
an implementation of software pipelining that attempts to
reduce register pressure and generate efficient pipelines with
a low compile-time cost.
This implementaion of SMS is a target-independent back-end pass.
When enabled, the pass should run just prior to the register
allocation pass, while the machine IR is in SSA form. If the pass
is successful, then the original loop is replaced by the optimized
loop. The optimized loop contains one or more prolog blocks, the
pipelined kernel, and one or more epilog blocks.
This pass is enabled for Hexagon only. To enable for other targets,
a couple of target specific hooks must be implemented, and the
pass needs to be called from the target's TargetMachine
implementation.
Differential Review: http://reviews.llvm.org/D16829
llvm-svn: 277169
If the mask of a vector shuffle has alternating odd or even numbers
starting with 1 or 0 respectively up to the largest possible index
for the given type in the given HVX mode (single of double) we can
generate vpacko or vpacke instruction respectively.
E.g.
%42 = shufflevector <32 x i16> %37, <32 x i16> %41,
<32 x i32> <i32 1, i32 3, ..., i32 63>
is %42.h = vpacko(%41.w, %37.w)
Patch by Pranav Bhandarkar.
llvm-svn: 277168
Rebalances address calculation trees and applies Hexagon-specific
optimizations to the trees to improve instruction selection.
Patch by Tobias Edler von Koch.
llvm-svn: 277151
The post register allocator scheduler can generate poor schedules
because the scoreboard hazard recognizer is unable to identify
hazards for Hexagon precisely. Instead, Hexagon should use a DFA
based hazard recognizer.
Patch by Brendon Cahoon.
llvm-svn: 277143
Normally, CFI instructions should be inserted after allocframe, but
if allocframe is in the same packet with a call, the CFI instructions
should be inserted before that packet.
llvm-svn: 277020
Before adding a new preheader block, check if there is a candidate block
where the loop setup could be placed speculatively. This will be off by
default.
llvm-svn: 276919
The callee-saved registers that are saved in a function are not pristine,
and so they can be defined and used. In case of shrink-wrapping though,
there are blocks that are outside of the save/restore range, and in those
blocks the saved registers must be treated as pristine. To avoid any uses
of these registers, add them as live-in in all those blocks.
This was already done for blocks reaching function exits after restore,
add code that does the same for blocks reached from the function entry
before save.
llvm-svn: 276886
Consider this case:
vreg1 = A2_zxth vreg0 (1)
...
vreg2 = A2_zxth vreg1 (2)
Redundant instruction elimination could delete the instruction (1)
because the user (2) only cares about the low 16 bits. Then it could
delete (2) because the input is already zero-extended. The problem
is that the properties allowing each individual instruction to be
deleted depend on the existence of the other instruction, so either
one can be deleted, but not both.
The existing check for this situation in RIE was insufficient. The
fix is to update all dependent cells when an instruction is removed
(replaced via COPY) in RIE.
llvm-svn: 276792
When the packetizer wants to put a store to a stack slot in the same
packet with an allocframe, it updates the store offset to reflect the
value of SP before it is updated by allocframe. If the store cannot
be packetized with the allocframe after all, the offset needs to be
updated back to the previous value.
llvm-svn: 276749
Some targets, notably AArch64 for ILP32, have different relocation encodings
based upon the ABI. This is an enabling change, so a future patch can use the
ABIName from MCTargetOptions to chose which relocations to use. Tested using
check-llvm.
The corresponding change to clang is in: http://reviews.llvm.org/D16538
Patch by: Joel Jones
Differential Revision: https://reviews.llvm.org/D16213
llvm-svn: 276654
Krzysztof Parzyszek