Correct the address space for the inserted argument
stack slot.
AMDGPU seems to not do anything with this information,
so I don't think this was breaking anything.
llvm-svn: 338428
When lowering calling conventions, prefer to decompose vectors
into the constitute register types. This avoids artifical constraints
to satisfy a wide super-register.
This improves code quality because now optimizations don't need to
deal with the super-register constraint. For example the immediate
folding code doesn't deal with 4 component reg_sequences, so by
breaking the register down earlier the existing immediate folding
code is able to work.
This also avoids the need for the shader input processing code
to manually split vector types.
llvm-svn: 338416
Don't declare them as X86SchedWritePair when the folded class will never be used.
Note: MOVBE (load/store endian conversion) instructions tend to have a very different behaviour to BSWAP.
llvm-svn: 338412
As was done for vector rotations, we can efficiently use ISD::MULHU for vXi8/vXi16 ISD::SRL lowering.
Shift-by-zero cases are still problematic (mainly on v32i8 due to extra AND/ANDN/OR or VPBLENDVB blend masks but v8i16/v16i16 aren't great either if PBLENDW fails) so I've limited this first patch to known non-zero cases if we can't easily use PBLENDW.
Differential Revision: https://reviews.llvm.org/D49562
llvm-svn: 338407
This patch does the same thing as r338153 for COFF.
Note that this patch affects only the order of log messages.
The output file is already deterministic.
Differential Revision: https://reviews.llvm.org/D50023
llvm-svn: 338406
These aren't exhaustive, but cover some instructions that are only available in 32-bit mode (where would we be without good BCD math performance?).
llvm-svn: 338404
Summary:
Similar to D49636, but for PMADDUBSW. This instruction has the additional complexity that the addition of the two products saturates to 16-bits rather than wrapping around. And one operand is treated as signed and the other as unsigned.
A C example that triggers this pattern
```
static const int N = 128;
int8_t A[2*N];
uint8_t B[2*N];
int16_t C[N];
void foo() {
for (int i = 0; i != N; ++i)
C[i] = MIN(MAX((int16_t)A[2*i]*(int16_t)B[2*i] + (int16_t)A[2*i+1]*(int16_t)B[2*i+1], -32768), 32767);
}
```
Reviewers: RKSimon, spatel, zvi
Reviewed By: RKSimon, zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49829
llvm-svn: 338402
This commit fixes two issues with the liveness information after the
call:
1) The code always spills RCX and RDX if InProlog == true, which results
in an use of undefined phys reg.
2) FinalReg, JoinReg, RoundedReg, SizeReg are not added as live-ins to
the basic blocks that use them, therefore they are seen undefined.
https://llvm.org/PR38376
Differential Revision: https://reviews.llvm.org/D50020
llvm-svn: 338400
Builder clang-cmake-armv8-full failed due to the assembly 'comment'
notation is not '#' in the target. So, I use CHECK-SAME to avoid to
check the comment notation in the same line in the test case.
llvm-svn: 338398
Summary:
When DFS numbers are not yet calculated for a dominator tree, we have to walk it up to say whether one node dominates some other.
This patch makes the slow walks shorter by only walking until the level of the node we check against is reached. This is because a node cannot possibly dominate something higher in its tree.
When running opt with -O3, the patch results in:
* 25% fewer loop iterations for `opt` (fullLTO)
* 30% fewer loop iterations for sqlite
Reviewers: brzycki, asbirlea, chandlerc, NutshellySima, grosser
Reviewed By: NutshellySima
Subscribers: mehdi_amini, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49955
llvm-svn: 338396
Workaround bug where the InstCombine pass was asserting on the IR added in lit
test, where we have a bitcast instruction after a GEP from an addrspace cast.
The second bitcast in the test was getting combined into
`bitcast <16 x i32>* %0 to <16 x i32> addrspace(3)*`, which looks like it should
be an addrspace cast instruction instead. Otherwise if control flow is allowed
to continue as it is now we create a GEP instruction
`<badref> = getelementptr inbounds <16 x i32>, <16 x i32>* %0, i32 0`. However
because the type of this instruction doesn't match the address space we hit an
assert when replacing the bitcast with that GEP.
```
void llvm::Value::doRAUW(llvm::Value*, bool): Assertion `New->getType() == getType() && "replaceAllUses of value with new value of different type!"' failed.
```
Differential Revision: https://reviews.llvm.org/D50058
llvm-svn: 338395
Summary:
When inserting lcssa Phi Nodes in the exit block
mak sure to preserve the original instructions DL.
Reviewers: vsk
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D50009
llvm-svn: 338391
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
It also generates label debug information under global isel.
Differential Revision: https://reviews.llvm.org/D45556
llvm-svn: 338390
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338387
A detailed description of the tool has been recently added by Matt to
CommandGuide/llvm-mca.rst. File README.txt is now redundant and can be removed;
all the relevant user-guide information has been improved and then moved to
llvm-mca.rst.
In future, we should add another .rst for the "llvm-mca developer manual" to
provide infromation about:
- llvm-mca internals.
- How to add custom stages to the simulated pipeline.
- How to provide extra processor info in the scheduling model to improve the
analysis performed by llvm-mca.
llvm-svn: 338386
This is being done in order to make GVN able to better optimize certain inputs.
MemDep doesn't use PhiValues directly, but does need to notifiy it when things
get invalidated.
Differential Revision: https://reviews.llvm.org/D48489
llvm-svn: 338384
Summary:
If the ExtractElement instructions can be optimized out during the
vectorization and we need to reshuffle the parent vector, this
ShuffleInstruction may be inserted in the wrong place causing compiler
to produce incorrect code.
Reviewers: spatel, RKSimon, mkuper, hfinkel, javed.absar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49928
llvm-svn: 338380
We could choose a free 0 for this, but this
matches the behavior for fmul undef, 1.0. Also,
the NaN use is more useful for folding use operations
although if it's not eliminated it is more expensive
in terms of code size.
llvm-svn: 338376
The LLD implementation of Tag_ABI_VFP_args needs to check the rarely seen
values of 3 (toolchain specific) and 4 compatible with both Base and VFP.
Add the missing enumeration values so that LLD can refer to them without
having to use the raw numbers.
Differential Revision: https://reviews.llvm.org/D50049
llvm-svn: 338373
This patch teaches llvm-mca how to identify dependency breaking instructions on
btver2.
An example of dependency breaking instructions is the zero-idiom XOR (example:
`XOR %eax, %eax`), which always generates zero regardless of the actual value of
the input register operands.
Dependency breaking instructions don't have to wait on their input register
operands before executing. This is because the computation is not dependent on
the inputs.
Not all dependency breaking idioms are also zero-latency instructions. For
example, `CMPEQ %xmm1, %xmm1` is independent on
the value of XMM1, and it generates a vector of all-ones.
That instruction is not eliminated at register renaming stage, and its opcode is
issued to a pipeline for execution. So, the latency is not zero.
This patch adds a new method named isDependencyBreaking() to the MCInstrAnalysis
interface. That method takes as input an instruction (i.e. MCInst) and a
MCSubtargetInfo.
The default implementation of isDependencyBreaking() conservatively returns
false for all instructions. Targets may override the default behavior for
specific CPUs, and return a value which better matches the subtarget behavior.
In future, we should teach to Tablegen how to automatically generate the body of
isDependencyBreaking from scheduling predicate definitions. This would allow us
to expose the knowledge about dependency breaking instructions to the machine
schedulers (and, potentially, other codegen passes).
Differential Revision: https://reviews.llvm.org/D49310
llvm-svn: 338372
The ELF for the Arm architecture document defines, for EF_ARM_EABI_VER5 and
above, the flags EF_ARM_ABI_FLOAT_HARD and EF_ARM_ABI_FLOAT_SOFT. These
have been defined to be compatible with the existing EF_ARM_VFP_FLOAT and
EF_ARM_SOFT_FLOAT used by gcc for EF_ARM_EABI_UNKNOWN.
This patch adds the flags in addition to the existing ones so that any code
depending on the old names will still work.
Differential Revision: https://reviews.llvm.org/D49992
llvm-svn: 338370
Since z13, the max group size will be 2 if any μop has more than 3 register
sources.
This has been ignored sofar in the SystemZHazardRecognizer, but is now
handled by recognizing those instructions and adjusting the tracking of
decoding and the cost heuristic for grouping.
Review: Ulrich Weigand
https://reviews.llvm.org/D49847
llvm-svn: 338368
This fold was written in an odd way and tried to avoid
an endless loop by bailing out on all constants instead
of the supposedly problematic case of -1. But (X & -1)
should always be simplified before we reach here, so I'm
not sure how that is a problem.
There were no tests for the commuted patterns, so I added
those at rL338364.
llvm-svn: 338367
isFNEG was duplicating much of what was done by getTargetConstantBitsFromNode in its own calls to getTargetConstantFromNode.
Noticed while reviewing D48467.
llvm-svn: 338358
Contrary to ELF, we don't add any markers that distinguish data generated
with .short/.long from normal instructions, so the .inst directive only
adds compatibility with assembly that uses it.
Differential Revision: https://reviews.llvm.org/D49936
llvm-svn: 338356
Contrary to ELF, we don't add any markers that distinguish data generated
with .long from normal instructions, so the .inst directive only adds
compatibility with assembly that uses it.
Differential Revision: https://reviews.llvm.org/D49935
llvm-svn: 338355
The patch introduces loop analysis (VPLoopInfo/VPLoop) for VPBlockBases.
This analysis will be necessary to perform some H-CFG transformations and
detect and introduce regions representing a loop in the H-CFG.
Reviewers: fhahn, rengolin, mkuper, hfinkel, mssimpso
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48816
llvm-svn: 338346
In one place we checked X86Subtarget.slowLEA() to decide if the pass should run. But to decide what the pass should we only check isSLM. This resulted in Goldmont going down the Bonnell path.
llvm-svn: 338342
This patch fixes demangling of template aliases as template-template
arguments, and also fixes function pointers and references as
not type template parameters. All of these can be properly
demangled now, so I've ported over the test
clang/test/CodeGenCXX/ms-template-callbacks.cpp. All of these
tests pass
llvm-svn: 338340
Also refactors some existing code to materialize addresses for the large code
model so it can be shared between G_GLOBAL_VALUE and G_BLOCK_ADDR.
This implements PR36390.
Differential Revision: https://reviews.llvm.org/D49903
llvm-svn: 338337
The vector contains the SDNodes that these functions create. The number of nodes is always a small number so we should use SmallVector to avoid a heap allocation.
llvm-svn: 338329
This patch adds support for demangling r-value references, new
operators such as the ""_foo operator, lambdas, alias types,
nullptr_t, and various other C++11'isms.
There is 1 failing test remaining in this file, which appears to
be related to back-referencing. This type of problem has the
potential to get ugly so I'd rather fix it in a separate patch.
Differential Revision: https://reviews.llvm.org/D50013
llvm-svn: 338324
Summary:
This patch mostly copies the existing Instruction Flow, and stage descriptions
from the mca README. I made a few text tweaks, but no semantic changes,
and made reference to the "default pipeline." I also removed the internals
references (e.g., reference to class names and header files). I did leave the
LSUnit name around, but only as an abbreviated word for the load-store unit.
Reviewers: andreadb, courbet, RKSimon, gbedwell, filcab
Reviewed By: andreadb
Subscribers: tschuett, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D49692
llvm-svn: 338319
This is exchanging a sub-of-1 with add-of-minus-1:
https://rise4fun.com/Alive/plKAH
This is another step towards improving select-of-constants codegen (see D48970).
x86 is the motivating target, and those diffs all appear to be wins. PPC and AArch64 look neutral.
I've limited this to early combining (!LegalOperations) in case a target wants to reverse it, but
I think canonicalizing to 'add' is more likely to produce further transforms because we have more
folds for 'add'.
Differential Revision: https://reviews.llvm.org/D49924
llvm-svn: 338317
The patch introduces dominator analysis for VPBlockBases and extend
VPlan's GraphTraits specialization with the required interfaces. Dominator
analysis will be necessary to perform some H-CFG transformations and
to introduce VPLoopInfo (LoopInfo analysis on top of the VPlan representation).
Reviewers: fhahn, rengolin, mkuper, hfinkel, mssimpso
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48815
llvm-svn: 338310
Also, make SerializationTraits for pairs forward the actual pair
template type arguments to the underlying serializer. This allows, for example,
std::pair<StringRef, bool> to be passed as an argument to an RPC call expecting
a std::pair<std::string, bool>, since there is an underlying serializer from
StringRef to std::string that can be used.
llvm-svn: 338305
Thinking about it more it might be possible for the later nodes to be folded in getNode in such a way that the other created nodes are left dead. This can cause use counts to be incorrect on nodes that aren't dead.
So its probably safer to leave this alone.
llvm-svn: 338298
Summary:
Normally, inling does not happen if caller does not have
"null-pointer-is-valid"="true" attibute but callee has it.
However, alwaysinline may force callee to be inlined.
In this case, if the caller has the "null-pointer-is-valid"="true"
attribute, copy the attribute to caller.
Reviewers: efriedma, a.elovikov, lebedev.ri, jyknight
Reviewed By: efriedma
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D50000
llvm-svn: 338292
This teaches the outliner to save LR to a register rather than the stack when
possible. This allows us to avoid bumping the stack in outlined functions in
some cases. By doing this, in a later patch, we can teach the outliner to do
something like this:
f1:
...
bl OUTLINED_FUNCTION
...
f2:
...
move LR's contents to a register
bl OUTLINED_FUNCTION
move the register's contents back
instead of falling back to saving LR in both cases.
llvm-svn: 338278
Previously, I thought this was a Windows failure. Then I realized it failed on
every bot that used the verifier. This makes it use the verifier always, and
adds that pass to the pipeline checks so that it's consistent across all bots.
llvm-svn: 338272
Summary:
Attempt to extract a shrl from a udiv or a shl from a mul if this allows a rotate to be formed. This targets cases where the input to a rotate pattern was a mul or udiv by a constant and InstCombine merged one of the shifts with the op.
Patch by: sameconrad (Sam Conrad)
Reviewers: RKSimon, craig.topper, spatel, lebedev.ri, javed.absar
Reviewed By: lebedev.ri
Subscribers: efriedma, kparzysz, llvm-commits
Differential Revision: https://reviews.llvm.org/D47681
llvm-svn: 338270
This reapplies commit r338206 reverted by r338214 since the bug that
r338206 uncovered has been fixed in r338268.
Add support for inline assembly with matching input operand that do not
naturally go in the register class it is constrained to (eg. double in a
32-bit GPR). Note that regular input is already handled by existing
code.
llvm-svn: 338269
It seems like the pass pipeline on Windows is slightly different than on Linux
and macOS. As a result, the arm64-opt-remarks-lazy-bfi test has been failing.
This switches a CHECK-NEXT to a CHECK-DAG to try and get this running properly
again.
It'd be nice to switch it back to a CHECK-NEXT if possible, but the CHECK-NEXT
lines following the line we care about (the optimization remark emitter)
do a pretty good job of enforcing the ordering we want.
Hopefully this works, since I don't have a Windows machine. ;)
Example failure: http://lab.llvm.org:8011/builders/llvm-clang-x86_64-expensive-checks-win/builds/11295
llvm-svn: 338267
This patch enables instructions that are destructive on their
destination- and first source operand, to be prefixed with a
MOVPRFX instruction.
This patch also adds a variety of tests:
- positive tests for all instructions and forms that accept a
movprfx for either or both predicated and unpredicated forms.
- negative tests for all instructions and forms that do not accept
an unpredicated or predicated movprfx.
- negative tests for the diagnostics that get emitted when a MOVPRFX
instruction is used incorrectly.
This is patch [2/2] in a series to add MOVPRFX instructions:
- Patch [1/2]: https://reviews.llvm.org/D49592
- Patch [2/2]: https://reviews.llvm.org/D49593
Reviewers: rengolin, SjoerdMeijer, samparker, fhahn, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D49593
llvm-svn: 338261
This patch adds predicated and unpredicated MOVPRFX instructions, which
can be prepended to SVE instructions that are destructive on their first
source operand, to make them a constructive operation, e.g.
add z1.s, p0/m, z1.s, z2.s <=> z1 = z1 + z2
can be made constructive:
movprfx z0, z1
add z0.s, p0/m, z0.s, z2.s <=> z0 = z1 + z2
The predicated MOVPRFX instruction can additionally be used to zero
inactive elements, e.g.
movprfx z0.s, p0/z, z1.s
add z0.s, p0/m, z0.s, z2.s
Not all instructions can be prefixed with the MOVPRFX instruction
which is why this patch also adds a mechanism to validate prefixed
instructions. The exact rules when a MOVPRFX applies is detailed in
the SVE supplement of the Architectural Reference Manual.
This is patch [1/2] in a series to add MOVPRFX instructions:
- Patch [1/2]: https://reviews.llvm.org/D49592
- Patch [2/2]: https://reviews.llvm.org/D49593
Reviewers: rengolin, SjoerdMeijer, samparker, fhahn, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D49592
llvm-svn: 338258
This makes it easier for someone to copy-paste this line, change the path, and run the command.
Differential Revision: https://reviews.llvm.org/D49201
llvm-svn: 338254
The combination of r338240 and r338242 causes the opt pass pipeline tests to
fail because of how r338242 makes BasicAA be invalidated more often. Adjust the
tests to reflect this.
llvm-svn: 338250
By using PhiValuesAnalysis we can get all the values reachable from a phi, so
we can be more precise instead of giving up when a phi has phi operands. We
can't make BaseicAA directly use PhiValuesAnalysis though, as the user of
BasicAA may modify the function in ways that PhiValuesAnalysis can't cope with.
For this optional usage to work correctly BasicAAWrapperPass now needs to be not
marked as CFG-only (i.e. it is now invalidated even when CFG is preserved) due
to how the legacy pass manager handles dependent passes being invalidated,
namely the depending pass still has a pointer to the now-dead dependent pass.
Differential Revision: https://reviews.llvm.org/D44564
llvm-svn: 338242
The machine verifier asserts with:
Assertion failed: (isMBB() && "Wrong MachineOperand accessor"), function getMBB, file ../include/llvm/CodeGen/MachineOperand.h, line 542.
It calls analyzeBranch which tries to call getMBB if the opcode is
JMP_1, but in this case we do:
JMP_1 @OUTLINED_FUNCTION
I believe we have to use TAILJMPd64 instead of JMP_1 since JMP_1 is used
with brtarget8.
Differential Revision: https://reviews.llvm.org/D49299
llvm-svn: 338237
Summary:
These instructions interact with hardware blocks outside the shader core,
and they can have "scalar" side effects even when EXEC = 0. We don't
want these scalar side effects to occur when all lanes want to skip
these instructions, so always add the execz skip branch instruction
for basic blocks that contain them.
Also ensure that we skip scalar stores / atomics, though we don't
code-gen those yet.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48431
Change-Id: Ieaeb58352e2789ffd64745603c14970c60819d44
llvm-svn: 338235
Code in `CC_ARM_AAPCS_Custom_Aggregate()` is responsible for handling
homogeneous aggregates for `CC_ARM_AAPCS_VFP`. When an aggregate ends up
fully on stack, the function tries to pack all resulting items of the
aggregate as tightly as possible according to AAPCS.
Once the first item was laid out, the alignment used for consecutive
items was the size of one item. This logic went wrong for 128-bit
vectors because their alignment is normally only 64 bits, and so could
result in inserting unexpected padding between the first and second
element.
The patch fixes the problem by updating the alignment with the item size
only if this results in reducing it.
Differential Revision: https://reviews.llvm.org/D49720
llvm-svn: 338233
There are a couple of issues you run into when you start getting into
more complex names, especially with regards to function local statics.
When you've got something like:
int x() {
static int n = 0;
return n;
}
Then this needs to demangle to something like
int `int __cdecl x()'::`1'::n
The nested mangled symbols (e.g. `int __cdecl x()` in the above
example) also share state with regards to back-referencing, so
we need to be able to re-use the demangler in the middle of
demangling a symbol while sharing back-ref state.
To make matters more complicated, there are a lot of ambiguities
when demangling a symbol's qualified name, because a function local
scope pattern (usually something like `?1??name?`) looks suspiciously
like many other possible things that can occur, such as `?1` meaning
the second back-ref and disambiguating these cases is rather
interesting. The `?1?` in a local scope pattern is actually a special
case of the more general pattern of `? + <encoded number> + ?`, where
"encoded number" can itself have embedded `@` symbols, which is a
common delimeter in mangled names. So we have to take care during the
disambiguation, which is the reason for the overly complicated
`isLocalScopePattern` function in this patch.
I've added some pretty obnoxious tests to exercise all of this, which
exposed several other problems related to back-referencing, so those
are fixed here as well. Finally, I've uncommented some tests that were
previously marked as `FIXME`, since now these work.
Differential Revision: https://reviews.llvm.org/D49965
llvm-svn: 338226
The DAGCombiner has a mechanism for ensuring all nodes have been visited at least once. Every time a node is visited, it makes sure its operands have been in the worklist at least once. This ensures that when multiple nodes are created by a combine, only the last node needs to be returned. The earlier nodes can all be found Through this operand check. These means we don't need to explicitly add nodes to the worklist when a combine creates multiple nodes.
I've removed the most obvious cases here. There are probably more than can be removed.
llvm-svn: 338222
These are reassociated versions of the same pattern and
similar transforms as in rL338200 and rL338118.
The motivation is identical to those commits:
Patterns with add/sub combos can be improved using
'not' ops. This is better for analysis and may lead
to follow-on transforms because 'xor' and 'add' are
commutative/associative. It can also help codegen.
llvm-svn: 338221
We need to be able to initiate a nested demangling from inside
of an "outer" demangling. These need to be able to share some
state, such as back-references. As a result, we can't store
things like the output stream or the mangled name in the Demangler
class, since each demangling will have different values. So
remove this state and pass it through the necessary methods.
llvm-svn: 338219
Dsymutil's update functionality was broken on Windows because we tried
to rename a file while we're holding open handles to that file. TempFile
provides a solution for this through its keep(Twine) method. This patch
changes dsymutil to make use of that functionality.
Differential revision: https://reviews.llvm.org/D49860
llvm-svn: 338216
The WHILE instructions generate a predicate that is true while the
comparison of the first scalar operand (incremented for each predicate
element) with the second scalar operand is true and false thereafter.
WHILELE While incrementing signed scalar less than or equal to scalar
WHILELO While incrementing unsigned scalar lower than scalar
WHILELS While incrementing unsigned scalar lower than or same as scalar
WHILELT While incrementing signed scalar less than scalar
e.g.
whilele p0.s, x0, x1
generates predicate p0 (for 32bit elements) by incrementing
(signed) x0 and comparing that vector to splat(x1).
llvm-svn: 338211
The instructions added in this patch permit active elements within
a vector to be processed sequentially without unpacking the vector.
PFIRST Set the first active element to true.
PNEXT Find next active element in predicate.
CTERMEQ Compare and terminate loop when equal.
CTERMNE Compare and terminate loop when not equal.
llvm-svn: 338210
There are some very subtle differences between how one should
parse symbol names and type names. They differ with respect
to back-referencing, the set of legal values that can appear
as the unqualified portion, and various other aspects.
By separating the parsing code into separate paths, we can
remove a lot of ambiguity during the demangling process, which
is necessary for demangling more complicated things like
function local statics, nested classes, and lambdas.
llvm-svn: 338207
Add support for inline assembly with matching input operand that do not
naturally go in the register class it is constrained to (eg. double in a
32-bit GPR). Note that regular input is already handled by existing
code.
llvm-svn: 338206
This removes the need for an assert to ensure the pointer isn't null.
Years ago we had ifs the checked the pointer was non-null before very access to the vector. These checks were removed and replaced with a single assert. But a reference seems more suitable here.
llvm-svn: 338205
X86 normally requires immediates to be a signed 32-bit value which would exclude i64 0x80000000. But for add/sub we can negate the constant and use the opposite instruction.
llvm-svn: 338204
https://rise4fun.com/Alive/jDd
Patterns with add/sub combos can be improved using
'not' ops. This is better for analysis and may lead
to follow-on transforms because 'xor' and 'add' are
commutative/associative. It can also help codegen.
llvm-svn: 338200
This patch adds PFALSE (unconditionally sets all elements of
the predicate to false) and PTEST (set the status flags for the
predicate).
llvm-svn: 338198
SelectionDAGBuilder widens v3i32/v3f32 arguments to
to v4i32/v4f32 which consume an additional register.
In addition to wasting argument space, this produces extra
instructions since now it appears the 4th vector component has
a meaningful value to most combines.
llvm-svn: 338197
This patch adds support for instructions that partition a predicate
based on data-dependent termination conditions in a loop.
BRKA Break after the first true condition
BRKAS Break after the first true condition, setting condition flags
BRKB Break before the first true condition
BRKBS Break before the first true condition, setting condition flags
BRKPA Break after the first true condition, propagating from the
previous partition
BRKPAS Break after the first true condition, propagating from the
previous partition, setting condition flags
BRKPB Break before the first true condition, propagating from the
previous partition
BRKPBS Break before the first true condition, propagating from the
previous partition, setting condition flags
BRKN Propagate break to next partition
BKRNS Propagate break to next partition, setting condition flags
llvm-svn: 338196
We now, from clang, can turn arrays of
static short g_data[] = {16, 16, 16, 16, 16, 16, 16, 16, 0, 0, 0, 0, 0, 0, 0, 0};
into structs of the form
@g_data = internal global <{ [8 x i16], [8 x i16] }> ...
GlobalOpt will incorrectly SROA it, not realising that the access to the first
element may overflow into the second. This fixes it by checking geps more
thoroughly.
I believe this makes the globalsra-partial.ll test case invalid as the %i value
could be out of bounds. I've re-purposed it as a negative test for this case.
Differential Revision: https://reviews.llvm.org/D49816
llvm-svn: 338192
Stack overflow on invalid. While collapsing references, we were skipping over a
cycle check in ForwardTemplateReference leading to a stack overflow. This commit
fixes the problem by duplicating the cycle check in ReferenceType.
llvm-svn: 338190
Summary:
It was pointed out by @chandlerc that it's not clear whether both applyUpdates and insert/deleteEdge can be used to perform multiple updates.
IMO, the confusing part was that the comment above applyUpdates made a comparison of expected update time between calling it and calling insert/deleteEdge multiple times. It's generally not possible to safely call insert/deleteEdge multiple times, which documentation for each of the 3 functions warns about, so the whole comparison makes very little sense. On top of that, the comment is already lengthy, so I think it's best to just get rid of this comparison.
Reviewers: chandlerc, asbirlea, NutshellySima, grosser
Reviewed By: chandlerc
Subscribers: llvm-commits, chandlerc
Differential Revision: https://reviews.llvm.org/D49944
llvm-svn: 338184
This should make the semantics of DIExpressions within llvm.dbg.{addr,
declare, value} easier to understand.
Differential Revision: https://reviews.llvm.org/D49572
llvm-svn: 338182
Summary:
Fixing 2 issues with the DT update in trivial branch switching, though I don't have a case where DT update fails.
1. After splitting ParentBB->UnswitchedBB edge, new edges become: ParentBB->LoopExitBB->UnswitchedBB, so remove ParentBB->LoopExitBB edge.
2. AFAIU, for multiple CFG changes, DT should be updated using batch updates, vs consecutive addEdge and removeEdge calls.
Reviewers: chandlerc, kuhar
Subscribers: sanjoy, jlebar, llvm-commits
Differential Revision: https://reviews.llvm.org/D49925
llvm-svn: 338180
Summary:
Moved Explicit Locals pass to last.
Made that pass obligatory.
Made it convert from register to stack based instructions, and removed the registers.
Fixes to related code that was expecting register based instructions.
Added the correct testing flag to all tests, depending on what the
format they were expecting so far.
Translated one test to stack format as example: reg-stackify-stack.ll
tested:
llvm-lit -v `find test -name WebAssembly`
unittests/MC/*
Reviewers: dschuff, sunfish
Subscribers: sbc100, jgravelle-google, eraman, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D49160
llvm-svn: 338164
Fixed the ASAN failure from before in r338148, so recommiting.
This patch enables the MachineOutliner by default in AArch64 under -Oz.
The MachineOutliner offers around a 4.5% improvement on the current -Oz code
size improvements.
We have done work into improving the debuggability of outlined code, so that
users of -Oz won't be surprised by the optimization. We have also been executing
the LLVM test suite and common external tests such as the SPEC suites
continuously with no issue. The outliner has a low compile-time overhead of
roughly 1%. At this point, the outliner would be a really good addition to the
-Oz pass pipeline!
llvm-svn: 338160
The tests with a constant sub operand were added with rL338143,
but the potential transform doesn't have that requirement, so
adding more tests with variable operands.
llvm-svn: 338150
There was a missing check for if a candidate list was entirely deleted. This
adds that check.
This fixes an asan failure caused by running test/CodeGen/AArch64/addsub_ext.ll
with the MachineOutliner enabled.
llvm-svn: 338148
This feature enables the fusion of such operations on Cortex A57 and Cortex
A72, as recommended in their Software Optimisation Guides, sections 4.14 and
4.11, respectively.
Differential revision: https://reviews.llvm.org/D49563
llvm-svn: 338147
Errors like the following are reported by:
https://urldefense.proofpoint.com/v2/url?u=http-3A__lab.llvm.org-3A8011_builders_llvm-2Dclang-2Dx86-5F64-2Dexpensive-2Dchecks-2Dwin_builds_11261&d=DwIBAg&c=5VD0RTtNlTh3ycd41b3MUw&r=DA8e1B5r073vIqRrFz7MRA&m=929oWPCf7Bf2qQnir4GBtowB8ZAlIRWsAdTfRkDaK-g&s=9k-wbEUVpUm474hhzsmAO29VXVvbxJPWD9RTgCD71fQ&e=
*** Bad machine code: Explicit definition marked as use ***
- function: cal_align1
- basic block: %bb.0 entry (0x47edd98)
- instruction: LDB $r3, $r2, 0
- operand 0: $r3
This is because RegState info was missing for ScratchReg inside
expandMEMCPY. This caused incomplete register usage information to
MachineInstr verifier which then would complain as there could be potential
code-gen issue if the complained MachineInstr is used in place where
register usage information matters even though the memcpy expanding is not
in such case as it happens at the last stage of IR optimization pipeline.
We should always specify those register usage information which compiler
couldn't deduct automatically whenever we add a hardware register manually.
Reported-by: Builder llvm-clang-x86_64-expensive-checks-win Build #11261
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 338134
This patch enables the MachineOutliner by default in AArch64 under -Oz.
The MachineOutliner offers around a 4.5% improvement on the current -Oz code
size improvements.
We have done work into improving the debuggability of outlined code, so that
users of -Oz won't be surprised by the optimization. We have also been executing
the LLVM test suite and common external tests such as the SPEC suites
continuously with no issue. The outliner has a low compile-time overhead of
roughly 1%. At this point, the outliner would be a really good addition to the
-Oz pass pipeline!
llvm-svn: 338133
This is a follow-up suggested in D48970.
Alive proofs:
https://rise4fun.com/Alive/sII
We can eliminate an instruction in the usual select-of-constants
to bit hack transform by adjusting the add/sub with constant.
This is always a win.
There are more transforms that are likely wins, but they may need
target hooks in case some targets do not benefit.
This is another step towards making up for canonicalizing to
select-of-constants in rL331486.
llvm-svn: 338132
R600 can't handle immediates for BFE, these will be eliminated later.
Fixes powr/pow regressions n r600 since r334817
Differential Revision: https://reviews.llvm.org/D49641
llvm-svn: 338127
This patch adds support for various integer reduction operations:
SADDV signed add reduction to scalar
UADDV unsigned add reduction to scalar
SMAXV signed maximum reduction to scalar
SMINV signed minimum reduction to scalar
UMAXV unsigned maximum reduction to scalar
UMINV unsigned minimum reduction to scalar
ANDV logical AND reduction to scalar
ORV logical OR reduction to scalar
EORV logical EOR reduction to scalar
The reduction is predicated, e.g.
smaxv s0, p0, z1.s
performs a signed maximum reduction on active elements in z1,
and stores the (signed max value) result in s0.
llvm-svn: 338126
This patch adds support for various floating-point
reduction operations:
FADDA strictly-ordered add reduction, accumulating in scalar
FADDV recursive add reduction to scalar
FMAXV recursive max reduction to scalar
FMINV recursive min reduction to scalar
FMAXNMV recursive max number reduction to scalar
FMINNMV recursive min number reduction to scalar
The reduction is predicated, e.g.
fadda d0, p0, d0, z1.d
performs the add-reduction in strict order on active elements
in z1, accumulating into d0.
faddv d0, p0, z1.d
performs the add-reduction (not in strict order)
on active elements in z1, storing the result in d0.
llvm-svn: 338123
This patch adds support for transcendental acceleration
instructions 'FEXPA' (exponential accelerator) and 'FTSSEL'
(trigonometric select coefficient).
llvm-svn: 338121
Summary:
As it was, always exporting LLVM_LINK_LLVM_DYLIB caused out-of-tree
clients to lose the ability to link against the dylib, even if in-tree tools did
not. By only exporting the setting if it is enabled, out-of-tree clients get the
correct default, but may still choose if they can.
Reviewers: mgorny, beanz, labath, bogner, chandlerc
Reviewed By: bogner, chandlerc
Subscribers: bollu, llvm-commits
Differential Revision: https://reviews.llvm.org/D49843
llvm-svn: 338119
The tests with constants show a missing optimization.
Analysis for adds is better than subs, so this can also
help with other transforms. And codegen is better with
adds for targets like x86 (destructive ops, no sub-from).
https://rise4fun.com/Alive/llK
llvm-svn: 338118
This is a follow-up for the patch rL335020. When we replace compares against
trunc with compares against wide IV, we can also replace signed predicates with
unsigned where it is legal.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D48763
llvm-svn: 338115
This commit includes unit tests for D48828, which enhances InstSimplify to enable jump threading with a method whose return type is std::pair<int, bool> or std::pair<bool, int>.
I am going to commit the actual transformation later.
llvm-svn: 338107
Not sure why they were being explicitly excluded, but I believe all the math inside the if works. I changed the absolute value to be uint64_t instead of int64_t so INT64_MIN+1 wouldn't be signed wrap.
llvm-svn: 338101
Summary:
Some links were failing with "Global is external, but doesn't have
external or weak linkage!" in ThinLTO builds with debug
information. This happened when we elide the body of a global that is
referenced by debug info. This results in a declaration, which we
would then internalize - but declarations cannot be internal. This
change avoids the problem by not internalizing these declarations.
Fixes PR38046.
Reviewers: pcc, tejohnson
Subscribers: mehdi_amini, aprantl, hiraditya, JDevlieghere, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49777
llvm-svn: 338100
Summary:
This is the pattern you get from the loop vectorizer for something like this
int16_t A[1024];
int16_t B[1024];
int32_t C[512];
void pmaddwd() {
for (int i = 0; i != 512; ++i)
C[i] = (A[2*i]*B[2*i]) + (A[2*i+1]*B[2*i+1]);
}
In this case we will have (add (mul (build_vector), (build_vector)), (mul (build_vector), (build_vector))). This is different than the pattern we currently match which has the build_vectors between an add and a single multiply. I'm not sure what C code would get you that pattern.
Reviewers: RKSimon, spatel, zvi
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49636
llvm-svn: 338097
If this happens the operands aren't updated and the existing node is returned. Make sure we pass this existing node up to the DAG combiner so that a proper replacement happens. Otherwise we get stuck in an infinite loop with an unoptimized node.
llvm-svn: 338090
Masked loads are calling DAG.getRoot rather than calling SelectionDAGBuilder::getRoot, which means the PendingLoads weren't emptied to update the root and create any needed TokenFactor. So it would be incorrect to call setRoot for the masked load.
This patch instead adds the masked load to PendingLoads so that the root doesn't get update until a store or scatter or something happens.. Alternatively, we could call SelectionDAGBuilder::getRoot before it, but that would create unnecessary serialization.
llvm-svn: 338085
Summary:
r262157 added ELF-specific logic to put a comdat on the __profc_*
globals created for available_externally functions. We should be able to
generalize that logic to all object file formats that support comdats,
i.e. everything other than MachO. This fixes duplicate symbol errors,
since on COFF, linkonce_odr doesn't make the symbol weak.
Fixes PR38251.
Reviewers: davidxl, xur
Subscribers: hiraditya, dmajor, llvm-commits, aheejin
Differential Revision: https://reviews.llvm.org/D49882
llvm-svn: 338082
The test failure was caused by the compiler not emitting a __debug_ranges section with DWARF 4 and
earlier when no ranges are needed. The test checks for the existence regardless.
llvm-svn: 338081
The DAGCombiner has a system for ensuring all nodes are visited. It doesn't require an AddToWorkList for every node that is created by a combine.
llvm-svn: 338079
Properly demangle function parameter back-references.
Previously we treated lists of function parameters and template
parameters the same. There are some important differences with regards
to back-references, and some less important differences regarding which
characters can appear before or after the name.
The important differences are that with a given type T, all instances of
a function parameter list share the same global back-ref table.
Specifically, if X and Y are function pointers, then there are 3
entities in the declaration X func(Y) which all affect and are affected
by the master parameter back-ref table:
1) The parameter list of X's function type
2) the parameter list of func itself
3) The parameter list of Y's function type.
The previous code would create a back-reference table that was local to
a single parameter list, so it would not be shared across parameter
lists.
This was discovered when porting ms-back-references.test from clang's
mangling tests. All of these tests should now pass with the new changes.
In doing so, I split the function for parsing template and function
parameters into two separate functions. This makes the template
parameter list parsing code in particular very small and easy to
understand now.
Differential Revision: https://reviews.llvm.org/D49875
llvm-svn: 338075
Summary:
In non-integral address spaces, we're not allowed to introduce inttoptr/ptrtoint
intrinsics. Instead, we need to expand any pointer arithmetic as geps on the
base pointer. Luckily this is a common task for SCEV, so all we have to do here
is hook up the corresponding helper function and add test case.
Fixes PR38290
Reviewers: sanjoy
Differential Revision: https://reviews.llvm.org/D49832
llvm-svn: 338073
Only wanting to pass a single SCEV operand to use as the offset of
the GEP is a common operation. Right now this requires creating a
temporary stack array at every call site. Add an overload
that encapsulates that pattern and simplify the call sites.
Suggested-By: sanjoy (in https://reviews.llvm.org/D49832)
llvm-svn: 338072
In light of the recent changes to SmallVector in r335421, r337514, and
r337820, document its advantages over std::vector (see r175906 and
r266909).
Also add a release note.
https://reviews.llvm.org/D49748
llvm-svn: 338071
Summary:
The behavior of followCopyChain with a subreg depends on the order in
which subranges appear in a live interval, which is bad.
This commit fixes that, and allows the copy chain to continue only if
all matching subranges that are not undefined take us to the same def.
I don't have a test for this; the reproducer I had on my branch with
various other local changes does not reproduce the problem on upstream
llvm. Also that reproducer was an ll test; attempting to convert it to a
mir test made the subranges appear in a different order and hid the
problem.
However I would argue that the old behavior was obviously wrong
and needs fixing.
Subscribers: MatzeB, qcolombet, llvm-commits
Differential Revision: https://reviews.llvm.org/D49535
Change-Id: Iee7936ef305918f3b498ac432e2cf651ae5cc2df
llvm-svn: 338070
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
llvm-svn: 338069
For function pointers, we would print something like
int __cdecl (*)(int)
We need to move the calling convention inside, and print
int (__cdecl *)(int)
This patch implements this change for regular function pointers as
well as member function pointers.
llvm-svn: 338068
This converts the arg qualifier mangling tests from
clang/CodeGenCXX/mangle-ms-arg-qualifiers.cpp to demangling tests.
Most tests already pass, so this patch doesn't come with any
functional change, just the addition of new tests. The few tests
that don't pass are left in with a FIXME label so that they don't
run but serve as documentation about what still doesn't work.
llvm-svn: 338067
None of these tests pass yet so they are commented out, but I'm
adding them with a FIXME label so that they don't get lost when
copying tests over from clang's mangling tests. Currently these
tests are all commented out.
llvm-svn: 338066
After this patch, we can now properly demangle pointers to member
functions. The calling convention is located in the wrong place,
but this will be fixed in a followup since it also affects non
member function pointers.
Differential Revision: https://reviews.llvm.org/D49639
llvm-svn: 338065
Even though gas doesn't document it, it has been supported there for
a very long time.
This produces the 32 bit relative virtual address (aka image relative
address) for a given symbol. ".rva foo" is essentially equal to
".long foo@imgrel".
Differential Revision: https://reviews.llvm.org/D49821
llvm-svn: 338063
Summary:
These two cases will trigger a dereference on a nullptr, since the
SymbolTable can be nonexistent for a given library, in addition to just
being empty.
Reviewers: alexshap
Reviewed By: alexshap
Subscribers: meikeb, kongyi, chh, jakehehrlich, llvm-commits, pirama
Differential Revision: https://reviews.llvm.org/D49534
llvm-svn: 338062
Scale the offset of VGPR spills by the wave size when it cannot fit in the
12-bit offset immediate field and so is added to the soffset SGPR. This
accounts for hardware swizzling of scratch memory.
Differential Revision: https://reviews.llvm.org/D49448
llvm-svn: 338060
- Save/restore only registers that are used.
This includes Callee saved registers and Caller saved registers
(arguments and temporaries) for integer and FP registers.
- If there is a call in the interrupt handler, save/restore all
Caller saved registers (arguments and temporaries) and all FP registers.
- Emit special return instructions depending on "interrupt"
attribute type.
Based on initial patch by Zhaoshi Zheng.
Reviewers: asb
Reviewed By: asb
Subscribers: rkruppe, the_o, MartinMosbeck, brucehoult, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D48411
llvm-svn: 338047
When fusing instructions A and B, we must add all predecessors of B as
predecessors of A to avoid instructions getting scheduling in between.
There is a special case involving ExitSU: Every other node must be
scheduled before it by design and we don't need to make this explicit in
the graph, however when fusing with a different node we need to schedule
every othere node before the fused node too and we need to make this
explicit now: This patch adds a dependency from the fused node to all
roots in the graph.
Differential Revision: https://reviews.llvm.org/D49830
llvm-svn: 338046
Summary:
A follow-up for D49266 / rL337166.
At least one of these cases is more canonical,
so we really do have to handle it.
https://godbolt.org/g/pkzP3Xhttps://rise4fun.com/Alive/pQyhZZ
We won't get to these cases with I1 being -1,
as that will be constant-folded to true or false.
I'm also not sure we actually hit the 'ule' case,
but i think the worst think that could happen is that being dead code.
Reviewers: spatel, craig.topper, RKSimon, javed.absar, efriedma
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49497
llvm-svn: 338044
Summary:
NVPTX target dos not use register-based frame information. Instead it
relies on the artificial local_depot that is used instead of the frame
and the data for variables must be emitted relatively to this
local_depot.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45963
llvm-svn: 338039
This fold is mentioned in PR38239:
https://bugs.llvm.org/show_bug.cgi?id=38239
The general case probably belongs in -reassociate, but given that we do
basic reassociation optimizations similar to this in instcombine already,
we might as well be consistent within instcombine and handle this pattern?
llvm-svn: 338038
Summary:
For NVPTX target the value of `DW_AT_frame_base` attribute must be set
to `DW_OP_call_frame_cfa`.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45785
llvm-svn: 338036
The standard library functions ::isprint/std::isprint have platform-
and locale-dependent behavior which makes LLVM's output less
predictable. In particular, regression tests my fail depending on the
implementation of these functions.
Implement llvm::isPrint in StringExtras.h with a standard behavior and
replace all uses of ::isprint/std::isprint by a call it llvm::isPrint.
The function is inlined and does not look up language settings so it
should perform better than the standard library's version.
Such a replacement has already been done for isdigit, isalpha, isxdigit
in r314883. gtest does the same in gtest-printers.cc using the following
justification:
// Returns true if c is a printable ASCII character. We test the
// value of c directly instead of calling isprint(), which is buggy on
// Windows Mobile.
inline bool IsPrintableAscii(wchar_t c) {
return 0x20 <= c && c <= 0x7E;
}
Similar issues have also been encountered by Julia:
https://github.com/JuliaLang/julia/issues/7416
I noticed the problem myself when on Windows isprint('\t') started to
evaluate to true (see https://stackoverflow.com/questions/51435249) and
thus caused several unit tests to fail. The result of isprint doesn't
seem to be well-defined even for ASCII characters. Therefore I suggest
to replace isprint by a platform-independent version.
Differential Revision: https://reviews.llvm.org/D49680
llvm-svn: 338034
Create a processHeaderPhiOperands for analysing the instructions
in the aft blocks that must be moved before the loop.
Differential Revision: https://reviews.llvm.org/D49061
llvm-svn: 338033
Previous version of this patch failed on darwin targets because of
different handling of cross-debug-section relocations. This fixes the
tests to emit the DW_AT_str_offsets_base attribute correctly in both
cases. Since doing this is a non-trivial amount of code, and I'm going
to need it in more than one test, I've added a helper function to the
dwarfgen DIE class to do it.
Original commit message follows:
The motivation for this is D49493, where we'd like to test details of
debug_str_offsets behavior which is difficult to trigger from a
traditional test.
This adds the plubming necessary for dwarfgen to generate this section.
The more interesting changes are:
- I've moved emitStringOffsetsTableHeader function from DwarfFile to
DwarfStringPool, so I can generate the section header more easily from
the unit test.
- added a new addAttribute overload taking an MCExpr*. This is used to
generate the DW_AT_str_offsets_base, which links a compile unit to the
offset table.
I've also added a basic test for reading and writing DW_form_strx forms.
Reviewers: dblaikie, JDevlieghere, probinson
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D49670
llvm-svn: 338031
Apparently, the issue with dsymutil update functionality on Windows was
that Windows doesn't like dsymutil renaming files that have open handles
to them. This disables the new accelerator test and updates the comment
in the other two test.
We should be able to enable the tests again once we updated the
implementation to use TempFile::keep() to keep the temporary files in
MachOUtils.
A big thank you to Jeremy Morse from Sony for figuring this out and
bringing it to my attention.
llvm-svn: 338030
- Some of the v8.3 pointer authentication instruction inhabit the Hint space
- These instructions can be assembled to hint instructions which act as NOP instructions prior to v8.3
- This patch permits using the hint instructions for all v8a targets
- Also, correct the RETA{A,B} instructions to match the instruction attributes of RET (set isTerminator and isBarrier)
Differential Revision: https://reviews.llvm.org/D49786
llvm-svn: 338029
On Windows when raw_fd_ostream::write_impl calls write, a 32 bit input
is required for character count. As a variable with size_t is used for
this argument on x64 integral demotion occurs. In the case of large
files an infinite loop follows.
See PR37926.
This fix allows the output of files larger than previous int32 limit.
Differential Revision: https://reviews.llvm.org/D48948
Patch by Owen Reynolds
Reviewed by: zturner
llvm-svn: 338027
The AsmPrinter created in the tests contained an uninitialized
TargetLoweringObjectFile. Things mostly worked regardless, because we
used a separate instance of that class to specify sections to emit.
This rearanges the object construction order so that we can avoid
creating two lowering objects. Instead, we properly initialize the
object in the AsmPrinter, and have the DWARF generator store a pointer
to it.
llvm-svn: 338026
Override getTypeForExtReturn so that functions returning
an i32 typed value have it sign extended on MIPS64.
Also provide patterns to get rid of unneeded sign extensions
for arithmetic instructions which implicitly sign extend
their results.
Differential Revision: https://reviews.llvm.org/D48374
llvm-svn: 338019
This reverts commit r337951.
While that kind of shared constant generally works fine in a MinGW
setting, it broke some cases of inline assembly that worked before:
$ cat const-asm.c
int MULH(int a, int b) {
int rt, dummy;
__asm__ (
"imull %3"
:"=d"(rt), "=a"(dummy)
:"a"(a), "rm"(b)
);
return rt;
}
int func(int a) {
return MULH(a, 1);
}
$ clang -target x86_64-win32-gnu -c const-asm.c -O2
const-asm.c:4:9: error: invalid variant '00000001'
"imull %3"
^
<inline asm>:1:15: note: instantiated into assembly here
imull __real@00000001(%rip)
^
A similar error is produced for i686 as well. The same test with a
target of x86_64-win32-msvc or i686-win32-msvc works fine.
llvm-svn: 338018
a helper function with a nice overview comment. NFC.
This is a preperatory refactoring to implementing another component of
mitigation here that was descibed in the design document but hadn't been
implemented yet.
llvm-svn: 338016
Update the dSYM bundle in place when swapping out the accelerator
tables. This should unbreak the windows bot that have been failing with
an access denied.
llvm-svn: 338014
Summary:
The GCOV API can be used to parse gcda/gcno files, but in order to implement custom output formats, users need to reimplement everything.
If the FileInfo members were protected instead of private, they'd be able to reuse the code.
Reviewers: bogner, davide, scott.smith
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41802
llvm-svn: 338013
This adds MC support for the crypto instructions that were made optional
extensions in Armv8.2-A (AArch64 only).
Differential Revision: https://reviews.llvm.org/D49370
llvm-svn: 338010
--strip-trailing-cr is a diffutils option which is also available on
BSD-licensed diff introduced in FreeBSD 11.2, however, it has a bug
comparing files mixing \r and \r\n. Use -b (POSIX) instead.
llvm-svn: 338008
I'm not sure if this was trying to avoid optimizing the new nodes further or what. Or maybe to prevent a cycle if something tried to reform the multiply? But I don't think its a reliable way to do that. If the user of the expanded multiply is visited by the DAGCombiner after this conversion happens, the DAGCombiner will check its operands, see that they haven't been visited by the DAGCombiner before and it will then add the first node to the worklist. This process will repeat until all the new nodes are visited.
So this seems like an unreliable prevention at best. So this patch just returns the new nodes like any other combine. If this starts causing problems we can try to add target specific nodes or something to more directly prevent optimizations.
Now that we handle the combine normally, we can combine any negates the mul expansion creates into their users since those will be visited now.
llvm-svn: 338007
These calls were making sure some newly created nodes were added to worklist, but the DAGCombiner has internal support for ensuring it has visited all nodes. Any time it visits a node it ensures the operands have been queued to be visited as well. This means if we only need to return the last new node. The DAGCombiner will take care of adding its inputs thus walking backwards through all the new nodes.
llvm-svn: 337996
The function in question is copy-pasted lots of times in DWARF-related classes.
Thus it will make sense to place its implementation into the Support library.
Reviewed by: lhames
Differential Revision: https://reviews.llvm.org/D49824
llvm-svn: 337995
- Remove unnecessary anchor function
- Remove unnecessary override of getAnalysisUsage
- Use reference instead of pointers where things cannot be nullptr
- Use ArrayRef instead of std::vector where possible
llvm-svn: 337989
- Avoid duplication of regmask size calculation.
- Simplify allocateRegisterMask() call.
- Rename allocateRegisterMask() to allocateRegMask() to be consistent
with naming in MachineOperand.
llvm-svn: 337986
This patch add support for emitting DWARF5 accelerator tables
(.debug_names) from dsymutil. Just as with the Apple style accelerator
tables, it's possible to update existing dSYMs. This patch includes a
test that show how you can convert back and forth between the two types.
If no kind of table is specified, dsymutil will default to generating
Apple-style accelerator tables whenever it finds those in its input. The
same is true when there are no accelerator tables at all. Finally, in
the remaining case, where there's at least one DWARF v5 table and no
Apple ones, the output will contains a DWARF accelerator tables
(.debug_names).
Differential revision: https://reviews.llvm.org/D49137
llvm-svn: 337980
Matt Davis