The fix is to avoid invalidating our insertion point in
replaceDbgDeclare:
Builder.insertDeclare(NewAddress, DIVar, DIExpr, Loc, InsertBefore);
+ if (DII == InsertBefore)
+ InsertBefore = &*std::next(InsertBefore->getIterator());
DII->eraseFromParent();
I had to write a unit tests for this instead of a lit test because the
use list order matters in order to trigger the bug.
The reduced C test case for this was:
void useit(int*);
static inline void inlineme() {
int x[2];
useit(x);
}
void f() {
inlineme();
inlineme();
}
llvm-svn: 313905
.. as well as the two subsequent changes r313826 and r313875.
This leads to segfaults in combination with ASAN. Will forward repro
instructions to the original author (rnk).
llvm-svn: 313876
I noticed this inefficiency while investigating PR34603:
https://bugs.llvm.org/show_bug.cgi?id=34603
This fix will likely push another bug (we don't maintain state of 'LateSimplifyCFG')
into hiding, but I'll try to clean that up with a follow-up patch anyway.
llvm-svn: 313829
Summary:
This implements the design discussed on llvm-dev for better tracking of
variables that live in memory through optimizations:
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117222.html
This is tracked as PR34136
llvm.dbg.addr is intended to be produced and used in almost precisely
the same way as llvm.dbg.declare is today, with the exception that it is
control-dependent. That means that dbg.addr should always have a
position in the instruction stream, and it will allow passes that
optimize memory operations on local variables to insert llvm.dbg.value
calls to reflect deleted stores. See SourceLevelDebugging.rst for more
details.
The main drawback to generating DBG_VALUE machine instrs is that they
usually cause LLVM to emit a location list for DW_AT_location. The next
step will be to teach DwarfDebug.cpp how to recognize more DBG_VALUE
ranges as not needing a location list, and possibly start setting
DW_AT_start_offset for variables whose lifetimes begin mid-scope.
Reviewers: aprantl, dblaikie, probinson
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37768
llvm-svn: 313825
Summary:
With this change:
- Methods in LoopBase trip an assert if the receiver has been invalidated
- LoopBase::clear frees up the memory held the LoopBase instance
This change also shuffles things around as necessary to work with this stricter invariant.
Reviewers: chandlerc
Subscribers: mehdi_amini, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D38055
llvm-svn: 313708
Summary:
See comment for why I think this is a good idea.
This change also:
- Removes an SCEV test case. The SCEV test was not testing anything useful (most of it was `#if 0` ed out) and it would need to be updated to deal with a private ~Loop::Loop.
- Updates the loop pass manager test case to deal with a private ~Loop::Loop.
- Renames markAsRemoved to markAsErased to contrast with removeLoop, via the usual remove vs. erase idiom we already have for instructions and basic blocks.
Reviewers: chandlerc
Subscribers: mehdi_amini, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D37996
llvm-svn: 313695
In the lambda we are now returning the remark by value so we need to preserve
its type in the insertion operator. This requires making the insertion
operator generic.
I've also converted a few cases to use the new API. It seems to work pretty
well. See the LoopUnroller for a slightly more interesting case.
llvm-svn: 313691
Add a profitability heuristic to enable runtime unrolling of multi-exit
loop: There can be atmost two unique exit blocks for the loop and the
second exit block should be a deoptimizing block. Also, there can be one
other exiting block other than the latch exiting block. The reason for
the latter is so that we limit the number of branches in the unrolled
code to being at most the unroll factor. Deoptimizing blocks are rarely
taken so these additional number of branches created due to the
unrolling are predictable, since one of their target is the deopt block.
Reviewers: apilipenko, reames, evstupac, mkuper
Subscribers: llvm-commits
Reviewed by: reames
Differential Revision: https://reviews.llvm.org/D35380
llvm-svn: 313363
During runtime unrolling on loops with multiple exits, we update the
exit blocks with the correct phi values from both original and remainder
loop.
In this process, we lookup the VMap for the mapped incoming phi values,
but did not update the VMap if a default entry was generated in the VMap
during the lookup. This default value is generated when constants or
values outside the current loop are looked up.
This patch fixes the assertion failure when null entries are present in
the VMap because of this lookup. Added a testcase that showcases the
problem.
llvm-svn: 313358
Summary: Move to LoopUtils method that collects all children of a node inside a loop.
Reviewers: majnemer, sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37870
llvm-svn: 313322
It now knows the tricks of both functions.
Also, fix a bug that considered allocas of non-zero address space to be always non null
Differential Revision: https://reviews.llvm.org/D37628
llvm-svn: 312869
Debug information can be, and was, corrupted when the runtime
remainder loop was fully unrolled. This is because a !null node can
be created instead of a unique one describing the loop. In this case,
the original node gets incorrectly updated with the NewLoopID
metadata.
In the case when the remainder loop is going to be quickly fully
unrolled, there isn't the need to add loop metadata for it anyway.
Differential Revision: https://reviews.llvm.org/D37338
llvm-svn: 312471
Summary:
If SimplifyCFG pass is able to merge conditional stores into single one,
it loses the alignment. This may lead to incorrect codegen. Patch
sets the alignment of the new instruction if it is set in the original
one.
Reviewers: jmolloy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36841
llvm-svn: 312030
When peeling kicks in, it updates the loop preheader.
Later, a successful full unroll of the loop needs to update a PHI
which i-th argument comes from the loop preheader, so it'd better look
at the correct block. Fixes PR33437.
Differential Revision: https://reviews.llvm.org/D37153
llvm-svn: 311922
The 1st try was reverted because it could inf-loop by creating a dead instruction.
Fixed that to not happen and added a test case to verify.
Original commit message:
Try to fold:
memcmp(X, C, ConstantLength) == 0 --> load X == *C
Without this change, we're unnecessarily checking the alignment of the constant data,
so we miss the transform in the first 2 tests in the patch.
I noted this shortcoming of LibCallSimpifier in one of the recent CGP memcmp expansion
patches. This doesn't help the example in:
https://bugs.llvm.org/show_bug.cgi?id=34032#c13
...directly, but it's worth short-circuiting more of these simple cases since we're
already trying to do that.
The benefit of transforming to load+cmp is that existing IR analysis/transforms may
further simplify that code. For example, if the load of the variable is common to
multiple memcmp calls, CSE can remove the duplicate instructions.
Differential Revision: https://reviews.llvm.org/D36922
llvm-svn: 311366
Try to fold:
memcmp(X, C, ConstantLength) == 0 --> load X == *C
Without this change, we're unnecessarily checking the alignment of the constant data,
so we miss the transform in the first 2 tests in the patch.
I noted this shortcoming of LibCallSimpifier in one of the recent CGP memcmp expansion
patches. This doesn't help the example in:
https://bugs.llvm.org/show_bug.cgi?id=34032#c13
...directly, but it's worth short-circuiting more of these simple cases since we're
already trying to do that.
The benefit of transforming to load+cmp is that existing IR analysis/transforms may
further simplify that code. For example, if the load of the variable is common to
multiple memcmp calls, CSE can remove the duplicate instructions.
Differential Revision: https://reviews.llvm.org/D36922
llvm-svn: 311333
a function into itself.
We tried to fix this before in r306495 but that got reverted as the
assert was actually hit.
This fixes the original bug (which we seem to have lost track of with
the revert) by blocking a second remapping when the function being
inlined is also the caller and the remapping could succeed but
erroneously.
The included test case would actually load from an inlined copy of the
alloca before this change, failing to load the stored value and
miscompiling.
Many thanks to Richard Smith for diagnosing a user miscompile to this
bug, and to Kyle for the first attempt and initial analysis and David Li
for remembering the issue and how to fix it and suggesting the patch.
I'm just stitching it together and landing it. =]
llvm-svn: 311229
Summary:
This patch makes LoopUnswitch use new incremental API for updating dominators.
It also updates SplitCriticalEdge, as it is called in LoopUnswitch.
There doesn't seem to be any noticeable performance difference when bootstrapping clang with this patch.
Reviewers: dberlin, davide, sanjoy, grosser, chandlerc
Reviewed By: davide, grosser
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D35528
llvm-svn: 311093
Summary: When we move then-else code to if, we need to merge its debug info, otherwise the hoisted instruction may have inaccurate debug info attached.
Reviewers: aprantl, probinson, dblaikie, echristo, loladiro
Reviewed By: aprantl
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D36778
llvm-svn: 310985
Two minor savings: avoid copying the SinkAfter map and avoid moving a cast if it
is not needed.
Differential Revision: https://reviews.llvm.org/D36408
llvm-svn: 310910
This recommits r310869, with the moved files and no extra changes.
Original commit message:
This addresses a fixme in InstSimplify about using decomposeBitTest. This also fixes InstSimplify to handle ugt and ult compares too.
I've modified the interface a little to return only the APInt version of the mask that InstSimplify needs. InstCombine now has a small wrapper routine to create a Constant out of it. I've also dropped the returning of 0 since InstSimplify doesn't need that. So InstCombine creates a zero constant itself.
I also had to make decomposeBitTest support vectors since InstSimplify needs that.
As InstSimplify can't use something from the Transforms library, I've moved the CmpInstAnalysis code to the Analysis library.
Differential Revision: https://reviews.llvm.org/D36593
llvm-svn: 310889
Failed to add the two files that moved. And then added an extra change I didn't mean to while trying to fix that. Reverting everything.
llvm-svn: 310873
This addresses a fixme in InstSimplify about using decomposeBitTest. This also fixes InstSimplify to handle ugt and ult compares too.
I've modified the interface a little to return only the APInt version of the mask that InstSimplify needs. InstCombine now has a small wrapper routine to create a Constant out of it. I've also dropped the returning of 0 since InstSimplify doesn't need that. So InstCombine creates a zero constant itself.
I also had to make decomposeBitTest support vectors since InstSimplify needs that.
As InstSimplify can't use something from the Transforms library, I've moved the CmpInstAnalysis code to the Analysis library.
Differential Revision: https://reviews.llvm.org/D36593
llvm-svn: 310869
On some targets, the penalty of executing runtime unrolling checks
and then not the unrolled loop can be significantly detrimental to
performance. This results in the need to be more conservative with
the unroll count, keeping a trip count of 2 reduces the overhead as
well as increasing the chance of the unrolled body being executed. But
being conservative leaves performance gains on the table.
This patch enables the unrolling of the remainder loop introduced by
runtime unrolling. This can help reduce the overhead of misunrolled
loops because the cost of non-taken branches is much less than the
cost of the backedge that would normally be executed in the remainder
loop. This allows larger unroll factors to be used without suffering
performance loses with smaller iteration counts.
Differential Revision: https://reviews.llvm.org/D36309
llvm-svn: 310824
This make it consistent with STATISTIC which it will often appears near.
While there move one DEBUG_COUNTER instance out of an anonymous namespace. It's already declaring a static variable so the namespace is unnecessary.
llvm-svn: 310637
To the best of my knowledge -metarenamer is used in two cases:
1) obfuscate names, when e.g. they contain informations that
can't be shared.
2) Improve clarity of the textual IR for testcases.
One of the usecases if getting the output of `opt` and passing it
to the lli interpreter to run the test. If metarenamer renames
@main, lli can't find an entry point.
llvm-svn: 309657
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
Summary:
It is possible for some passes to materialize a call to a libcall (ex: ldexp, exp2, etc),
but these passes will not mark the call as a gc-leaf-function. All libcalls are
actually gc-leaf-functions, so we change llvm::callsGCLeafFunction() to tell us that
available libcalls are equivalent to gc-leaf-function calls.
Reviewers: sanjoy, anna, reames
Reviewed By: anna
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35840
llvm-svn: 309291
Summary:
Until a more advanced version of importing can be implemented for
aliases (one that imports an alias as an available_externally definition
of the aliasee), skip the narrow subset of cases that was possible but
came at a cost: aliases of linkonce_odr functions could be imported
because the linkonce_odr function could be safely duplicated from the
source module. This came/comes at the cost of not being able to 'home'
imported linkonce functions (they had to be emitted linkonce_odr in all
the destination modules (even if they weren't used by an alias) rather
than as available_externally - causing extra object size).
Tangentially, this also was the only reason ThinLTO would emit multiple
CUs in to the resulting DWARF - which happens to be a problem for
Fission (there's a fix for this in GDB but not released yet, etc).
(actually it's not the only reason - but I'm sending a patch to fix the
other reason shortly)
There's no reason to believe this particularly narrow alias importing
was especially/meaningfully important, only that it was /possible/ to
implement in this way. When a more general solution is done, it should
still satisfy the DWARF concerns above, since the import will still be
available_externally, and thus not create extra CUs.
Since now all aliases are treated the same, I removed/simplified some
test cases since they were testing corner cases where there are no
longer any corners.
Reviewers: tejohnson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D35875
llvm-svn: 309278
Summary:
This changes SimplifyLibCalls to use the new OptimizationRemarkEmitter
API.
In fact, as SimplifyLibCalls is only ever called via InstCombine,
(as far as I can tell) the OptimizationRemarkEmitter is added there,
and then passed through to SimplifyLibCalls later.
I have avoided changing any remark text.
This closes PR33787
Patch by Sam Elliott!
Reviewers: anemet, davide
Reviewed By: anemet
Subscribers: davide, mehdi_amini, eraman, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D35608
llvm-svn: 309158
Separated out the profitability from the safety analysis for multiexit
loop unrolling. Currently, this is an NFC because profitability is true
only if the unroll-runtime-multi-exit is set to true (off-by-default).
This is to ease adding the profitability heuristic up for review at
D35380.
llvm-svn: 308753
If OpValue is non-null, we only consider operations similar to OpValue
when intersecting.
Differential Revision: https://reviews.llvm.org/D35292
llvm-svn: 308428
Summary:
When simplifying unconditional branches from empty blocks, we pre-test if the
BB belongs to a set of loop headers and keep the block to prevent passes from
destroying canonical loop structure. However, the current algorithm fails if
the destination of the branch is a loop header. Especially when such a loop's
latch block is folded into loop header it results in additional backedges and
LoopSimplify turns it into a nested loop which prevent later optimizations
from being applied (e.g., loop unrolling and loop interleaving).
This patch augments the existing algorithm by further checking if the
destination of the branch belongs to a set of loop headers and defer
eliminating it if yes to LateSimplifyCFG.
Fixes PR33605: https://bugs.llvm.org/show_bug.cgi?id=33605
Reviewers: efriedma, mcrosier, pacxx, hsung, davidxl
Reviewed By: efriedma
Subscribers: ashutosh.nema, gberry, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35411
llvm-svn: 308422
Summary:
When we runtime unroll with multiple exit blocks, we also need to update the
immediate dominators of the immediate successors of the exit blocks.
Reviewers: reames, mkuper, mzolotukhin, apilipenko
Reviewed by: mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35304
llvm-svn: 307909
Refactored the code and separated out a function
`canSafelyUnrollMultiExitLoop` to reduce redundant checks and make it
easier to add profitability heuristics later.
Added tests to runtime unrolling to make sure that unrolling for
multi-exit loops is not done unless the option
-unroll-runtime-multi-exit is true.
llvm-svn: 307843
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
Sanjoy Das