It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined
dummy procedure arguments by removing extra apostrophes and sorting the
list of symbols.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This patch supersedes D97749.
Differential Revision: https://reviews.llvm.org/D97774
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined
dummy procedure arguments by removing extra apostrophes and sorting the
list of symbols.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This patch supersedes D97749.
Differential Revision: https://reviews.llvm.org/D97774
This patch provides a fix for the `fdefault-*` family in f18
(Please consult `D96344` for details)
Differential Revision: https://reviews.llvm.org/D97724
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined dummy
procedure arguments.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This change supersedes D97201.
Differential Revision: https://reviews.llvm.org/D97749
Semantic checks for the following OpenMP 4.5 clauses.
1. 2.15.4.2 - Copyprivate clause
2. 2.15.3.4 - Firstprivate clause
3. 2.15.3.5 - Lastprivate clause
Add related test cases and resolve test cases marked as XFAIL.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D91920
This reverts commit 07de0846a5.
The original patch has caused 6 out 8 of Flang's public buildbots to
fail. As I'm not sure what the fix should be, I'm reverting this for
now. Please see https://reviews.llvm.org/D97201 for more context and
discussion.
- add ops: rebox, insert_on_range, absent, is_present
- embox, coordinate_of: replace old hand-written parser/pretty-printer with assembly format
- remove dead floating point ops, since buitlins work for all types
- update call op
- update documentation
- misc. NFC to formatting
- add op round trip tests
Authors: Eric Schweitz, Jean Perier, Zachary Selk, Kiran Chandramohan, et.al.
Differential Revision: https://reviews.llvm.org/D97500
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was
defined using the name of the procedure. But the procedure name was
being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous
symbols. I fixed this by making SymbolSet be an ordered set, which does
not use the "<" operator.
I also added tests that will crash the compiler without this change.
And I fixed the formatting on an error message from a previous update.
Differential Revision: https://reviews.llvm.org/D97201
We lower expressions with rank > 0 to a set of high-level array operations.
These operations are then analyzed and refined to more primitve
operations in subsequent pass(es).
This patch upstreams these array operations and some other helper ops.
Authors: Eric Schweitz, Rajan Walia, Kiran Chandramohan, et.al.
https://github.com/flang-compiler/f18-llvm-project/pull/565
Differential Revision: https://reviews.llvm.org/D97421
In clang:
Replace argc_ with Argc
Replace argv_ with Argv
Replace argv with Args
In flang:
Replace argc_ with argc
Replace argv_ with argv
Replace argv with args
Reviewed By: awarzynski, aganea
Differential Revision: https://reviews.llvm.org/D97138
This patch makes sure that for the following invocation of the new Flang
driver, clangDriver sets the input type to Fortran:
```
flang-new -E -
```
This change does not affect `clang`, i.e. for the following invocation
the input type is set to C:
```
clang -E -
```
This change leverages the fact that for `flang-new` the driver is in
Flang mode.
Differential Revision: https://reviews.llvm.org/D96777
Move the remaing of FIR types to TableGen type definition. This follow suggestion in D96422.
Reviewed By: schweitz, jeanPerier, rriddle
Differential Revision: https://reviews.llvm.org/D96987
CFI allocatable attribute is needed so that the descriptor for the
result can be allocated/deallocated.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D97395
This patch adds the new zero_bits operation and upstrams other changes
including the following:
- update tablegen syntax to newer forms
- update memory effects annotations
- update documentation [NFC]
- other NFC, such as whitespace and formatting
Differential revision: https://reviews.llvm.org/D97331
Originally, when we added the new driver, we created dedicated test
directories for `flang-new`. This way we separated the tests for the
`throwaway` and the new driver.
As we are increasing test coverage and starting to share tests between
the two drivers, it makes sense to share all directories and instead
rely on:
```
! REQUIRES: new-flang-driver
```
to mark tests as exclusively for the new driver.
Differential Revision: https://reviews.llvm.org/D97207
- Add a fatal error handler that can print a message with source location
before aborting.
- Update TODO macro to take an mlir location argument and to use the
newly introduced fatal error handler.
- Introduce TODO_NOLOC for the few places where no source location is
easily accessible.
Reviewed By: schweitz
Differential Revision: https://reviews.llvm.org/D97190
`verifyConstructionInvariants` is intended to allow for verifying the invariants of an attribute/type on construction, and `getChecked` is intended to enable more graceful error handling aside from an assert. There are a few problems with the current implementation of these methods:
* `verifyConstructionInvariants` requires an mlir::Location for emitting errors, which is prohibitively costly in the situations that would most likely use them, e.g. the parser.
This creates an unfortunate code duplication between the verifier code and the parser code, given that the parser operates on llvm::SMLoc and it is an undesirable overhead to pre-emptively convert from that to an mlir::Location.
* `getChecked` effectively requires duplicating the definition of the `get` method, creating a quite clunky workflow due to the subtle different in its signature.
This revision aims to talk the above problems by refactoring the implementation to use a callback for error emission. Using a callback allows for deferring the costly part of error emission until it is actually necessary.
Due to the necessary signature change in each instance of these methods, this revision also takes this opportunity to cleanup the definition of these methods by:
* restructuring the signature of `getChecked` such that it can be generated from the same code block as the `get` method.
* renaming `verifyConstructionInvariants` to `verify` to match the naming scheme of the rest of the compiler.
Differential Revision: https://reviews.llvm.org/D97100
Add -J to the f18 driver for compatibility with gfortran.
Add -module-dir for compatibility with the new flang driver.
They both set the output directory for .mod files and add the
directory to the search list. -module still only does the former.
Clean up the new driver test to match.
Differential Revision: https://reviews.llvm.org/D97164
This patch adds support for `-Xflang` in `flang-new`. The semantics are
identical to `-Xclang`.
With the addition of `-Xflang`, we can modify `-test-io` to be a
compiler-frontend only flag. This makes more sense, this flag is:
* very frontend specific
* to be used for development and testing only
* not to be exposed to the end user
Originally we added it to the compiler driver, `flang-new`, in order to
facilitate testing. With `-Xflang` this is no longer needed. Tests are
updated accordingly.
Differential Revision: https://reviews.llvm.org/D96864
This updates the various classes that support the compliation of
Fortran. These classes are shared by the test tools.
Authors: Eric Schweitz, Sameeran Joshi, et.al.
Differential Revision: https://reviews.llvm.org/D97073
Add the following options:
* -fdebug-measure-parse-tree
* -fdebug-pre-fir-tree
Summary of changes:
- Add 2 new frontend actions: DebugMeasureParseTreeAction and DebugPreFIRTreeAction
- Add MeasurementVisitor to FrontendActions.h
- Make reportFatalSemanticErrors return true if there are any fatal errors
- Port most of the `-fdebug-pre-fir-tree` tests to use the new driver if built, otherwise use f18.
Differential Revision: https://reviews.llvm.org/D96884
Most Fortran compilers accept the following benign extension,
and it appears in some applications:
SUBROUTINE FOO(A,N)
IMPLICIT NONE
REAL A(N) ! N is used before being typed
INTEGER N
END
Allow it in f18 only for default integer scalar dummy arguments.
Differential Revesion: https://reviews.llvm.org/D96982
These dependencies were introduced via the `ParseTreeDumper` API in:
* https://reviews.llvm.org/D96716
They manifested themselves in buildbot builders that set
`BUILD_SHARED_LIBS` to `On`.
Add the following options:
* -fdebug-dump-symbols
* -fdebug-dump-parse-tree
* -fdebug-dump-provenance
Summary of changes:
- Add 3 new frontend actions: DebugDumpSymbolsAction, DebugDumpParseTreeAction and DebugDumpProvenanceAction
- Add a unique pointer to the Semantics instance created in PrescanAndSemaAction
- Move fatal semantic error reporting to its own method, FrontendActions#reportFatalSemanticErrors
- Port most tests using `-fdebug-dump-symbols` and `-fdebug-dump-parse-tree` to the new driver if built, otherwise default to f18
Differential Revision: https://reviews.llvm.org/D96716
Fortran 2018 explicitly permits an ignored type declaration
for the result of a generic intrinsic function. See the comment
added to Semantics/expression.cpp for an explanation of why this
is somewhat dangerous and worthy of a warning.
Differential Revision: https://reviews.llvm.org/D96879
The intrinsic procedure table properly classify the various
intrinsics, but the PURE and ELEMENTAL attributes that these
classifications imply don't always make it to the utility
predicates that test symbols for them, leading to spurious
error messages in some contexts. So set those attribute flags
as appropriate in name resolution, using a new function to
isolate the tests.
An alternate solution, in which the predicates would query
the intrinsic procedure table for these attributes on demand,
was something I also tried, so that this information could
come directly from an authoritative source; but it would have
required references to the intrinsic table to be passed along
on too many seemingly unrelated APIs and ended up looking messy.
Several symbol table tests needed to have their expected outputs
augmented with the PURE and ELEMENTAL flags. Some bogus messages
that were flagged as such in test/Semantics/doconcurrent01.f90 were
removed, since they are now correctly not emitted.
Differential Revision: https://reviews.llvm.org/D96878
This patch is a follow up of D96422 and move BoxProcType to TableGen.
Reviewed By: schweitz, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96514
This patch is a follow up of D96422 and move CharacterType and BoxCharType to
TableGen.
Reviewed By: schweitz
Differential Revision: https://reviews.llvm.org/D96446
It's possible to define a procedure that has a procedure dummy argument which
names the procedure that contains it. This was causing the compiler to fall
into an infinite loop when characterizing a call to the procedure.
Following a suggestion from Peter, I fixed this be maintaining a set of
procedure symbols that had already been seen while characterizing a procedure.
This required passing a new parameter to the functions that characterized a
Procedure, a DummyArgument, and a DummyProcedure.
I also added several tests that will crash the compiler without this change.
Differential Revision: https://reviews.llvm.org/D96631
Fix Flang build after addition of a new OpenMP clauses for a clang patch (D76342).
Flang is using TableGen to generation the declaration of clause checks and the new clause
was missing a definiton.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D96808
This patch introduce the fir-opt tool. Similar to mlir-opt for FIR.
It will be used in following patches to test fir opt and round-trip.
Reviewed By: schweitz, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96535
Add the following options:
* -fimplicit-none and -fno-implicit-none
* -fbackslash and -fno-backslash
* -flogical-abbreviations and -fno-logical-abbreviations
* -fxor-operator and -fno-xor-operator
* -falternative-parameter-statement
* -finput-charset=<value>
Summary of changes:
- Enable extensions in CompilerInvocation#ParseFrontendArgs
- Add encoding_ to Fortran::frontend::FrontendOptions
- Add encoding to Fortran::parser::Options
Differential Revision: https://reviews.llvm.org/D96407
This patch adds the following compiler frontend driver options:
* -fdebug-unparse (f18 spelling: -funparse)
* -fdebug-unparse-with-symbols (f18 spelling: -funparse-with-symbols)
The new driver will only accept the new spelling. `f18` will accept both
the original and the new spelling.
A new base class for frontend actions is added: `PrescanAndSemaAction`.
This is added to reduce code duplication that otherwise these new
options would lead to. Implementation from
* `ParseSyntaxOnlyAction::ExecutionAction`
is moved to:
* `PrescanAndSemaAction::BeginSourceFileAction`
This implementation is now shared between:
* PrescanAndSemaAction
* ParseSyntaxOnlyAction
* DebugUnparseAction
* DebugUnparseWithSymbolsAction
All tests that don't require other yet unimplemented options are
updated. This way `flang-new -fc1` is used instead of `f18` when
`FLANG_BUILD_NEW_DRIVER` is set to `On`. In order to facilitate this,
`%flang_fc1` is added in the LIT configuration (lit.cfg.py).
`asFortran` from f18.cpp is duplicated as `getBasicAsFortran` in
FrontendOptions.cpp. At this stage it's hard to find a good place to
share this method. I suggest that we revisit this once a switch from
`f18` to `flang-new` is complete.
Differential Revision: https://reviews.llvm.org/D96483
The following _action_ options are always used with `-fsyntax-only`
(also an _action_ option):
* -fdebug-dump-symbols
* -fdebug-dump-parse-tree
This patch makes the above options imply `-fsyntax-only`.
From the perspective of `f18` this change saves typing and is otherwise
a non-functional change. But it will simplify things in the new driver,
`flang-new`, in which only the last action option is taken into account
and executed. In other words, the following would only run
`-fsyntax-only`:
```
flang-new -fdebug-dump-symbols -fsyntax-only <input>
```
whereas this would only run `-fdebug-dump-symbols`:
```
flang-new -fsyntax-only -fdebug-dump-symbols <input>
```
Differential Revision: https://reviews.llvm.org/D96528
Peter Steinfeld