This reverts commit 65243b6d19143cb7a03f68df0169dcb63e8b4632.
Seems like it's not a flake. It might have something to do with
the '*' character being in a command line.
llvm-svn: 334356
There were a few linux compilation failures, but other than that
I think this was just a flake that caused the tests to fail. I'm
going to resubmit and see if the failures go away, if not I'll
revert again.
llvm-svn: 334355
This reverts commit 10d2e88e87150a35dc367ba30716189d2af26774.
This is causing some test failures for some reason, reverting
while I investigate.
llvm-svn: 334354
This function was internal to Program.inc, but I've needed this
on several occasions when I've had to use CreateProcess without
llvm's sys::Execute functions. In doing so, I noticed that the
function was written using unsafe C-string access and was pretty
hard to understand / make sense of, so I've also re-written the
functions to use more modern LLVM constructs.
llvm-svn: 334353
This is a recommit of r333506, which was reverted in r333518.
The original commit message is below.
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 334344
Summary:
The function `llvm::sys::commandLineFitsWithinSystemLimits` appears to be overestimating the system limits. This issue was discovered while attempting to enable response files in the Swift compiler. When the compiler submits its frontend jobs, those jobs are subjected to the system limits on command line length. `commandLineFitsWithinSystemLimits` is used to determine if the job's arguments need to be wrapped in a response file. There are some cases where the argument size for the job passes `commandLineFitsWithinSystemLimits`, but actually exceeds the real system limit, and the job fails.
`clang` also uses this function to decide whether or not to wrap it's job arguments in response files. See: https://github.com/llvm-mirror/clang/blob/master/lib/Driver/Driver.cpp#L1341. Clang will also fail for response files who's size falls within a certain range. I wrote a script that should find a failure point for `clang++`. All that is needed to run it is Python 2.7, and a simple "hello world" program for `test.cc`. It should run on Linux and on macOS. The script is available here: https://gist.github.com/dabelknap/71bd083cd06b91c5b3cef6a7f4d3d427. When it hits a failure point, you should see a `clang: error: unable to execute command: posix_spawn failed: Argument list too long`.
The proposed solution is to mirror the behavior of `xargs` in `commandLinefitsWithinSystemLimits`. `xargs` defaults to 128k for the command line length size (See: https://fossies.org/dox/findutils-4.6.0/buildcmd_8c_source.html#l00551). It adjusts this depending on the value of `ARG_MAX`.
Reviewers: alexfh
Reviewed By: alexfh
Subscribers: llvm-commits
Tags: #clang
Patch by Austin Belknap!
Differential Revision: https://reviews.llvm.org/D47795
llvm-svn: 334295
NFC here, this just raises some platform specific ifdef hackery
out of a class and creates proper platform-independent typedefs
for the relevant things. This allows these typedefs to be
reused in other places without having to reinvent this preprocessor
logic.
llvm-svn: 334294
O_CLOEXEC is the right default, but occasionally you don't
want this. This is especially true for tools like debuggers
where you might need to spawn the child process with specific
files already open, but it's occasionally useful in other
scenarios as well, like when you want to do some IPC between
parent and child.
llvm-svn: 334293
This one allows much more flexibility than the standard
openFileForRead / openFileForWrite functions. Since there is now
just one "real" function that does the work, all other implementations
simply delegate to this one.
llvm-svn: 334246
This breaks the OpenFlags enumeration into two separate
enumerations: OpenFlags and CreationDisposition. The first
controls the behavior of the API depending on whether or not
the target file already exists, and is not a flags-based
enum. The second controls more flags-like values.
This yields a more easy to understand API, while also allowing
flags to be passed to the openForRead api, where most of the
values didn't make sense before. This also makes the apis more
testable as it becomes easy to enumerate all the configurations
which make sense, so I've added many new tests to exercise all
the different values.
llvm-svn: 334221
Fuchsia doesn't use __clear_cache, instead it provide zx_cache_flush
system call. Use it to flush instruction cache.
Differential Revision: https://reviews.llvm.org/D47753
llvm-svn: 334068
There was only one place in the entire codebase where a non
default value was being passed, and that place was already hidden
in an implementation file. So we can delete the extra parameter
and all existing clients continue to work as they always have,
while making the interface a bit simpler.
Differential Revision: https://reviews.llvm.org/D47789
llvm-svn: 334046
Windows' CRT has a limit of 512 open file descriptors, and fds which are
generated by converting a HANDLE via _get_osfhandle count towards this
limit as well.
Regardless, often you find yourself marshalling back and forth between
native HANDLE objects and fds anyway. If we know from the getgo that
we're going to need to work directly with the handle, we can cut out the
marshalling layer while also not contributing to filling up the CRT's
very limited handle table.
On Unix these functions just delegate directly to the existing set of
functions since an fd *is* the native file type. It would be nice, very
long term, if we could convert most uses of fds to file_t.
Differential Revision: https://reviews.llvm.org/D47688
llvm-svn: 333945
The idea behind WindowsSupport.h is that it's in the source directory so
that windows.h'isms don't leak out into the larger LLVM project. To that
end, any symbol that references a symbol from windows.h must be in this
private header, and not in a public header.
However, we had some useful utility functions in WindowsSupport.h which
have no dependency on the Windows API, but still only make sense on
Windows. Those functions should be usable outside of Support since there
is no risk of causing a windows.h leak. Although this introduces some
preprocessor logic in some header files, It's not too egregious and it's
better than the alternative of duplicating a ton of code.
Differential Revision: https://reviews.llvm.org/D47662
llvm-svn: 333798
As noted by Adrian on llvm-commits, PrintHTMLEscaped and PrintEscaped in
StringExtras did not conform to the LLVM coding guidelines. This commit
rectifies that.
llvm-svn: 333669
When printing string in the Plist, we weren't escaping the characters
which lead to invalid XML. This patch adds the escape logic to
StringExtras.
rdar://39785334
llvm-svn: 333565
This is a recommit of r333390, which was reverted in r333395, because it
caused cyclic dependency when building shared library `LLVMDemangle.so`.
In this commit `ItaniumDemangler.cpp` was not changed.
The original commit message is below.
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 333506
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 333390
The return value of sys::getDefaultTargetTriple, which is derived from
-DLLVM_DEFAULT_TRIPLE, is used to construct tool names, default target,
and in the future also to control the search path directly; as such it
should be used textually, without interpretation by LLVM.
Normalization of this value may lead to unexpected results, for example
if we configure LLVM with -DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-linux-gnu,
normalization will transform that value to x86_64--linux-gnu. Driver will
use that value to search for tools prefixed with x86_64--linux-gnu- which
may be confusing. This is also inconsistent with the behavior of the
--target flag which is taken as-is without any normalization and overrides
the value of LLVM_DEFAULT_TARGET_TRIPLE.
Users of sys::getDefaultTargetTriple already perform their own
normalization as needed, so this change shouldn't impact existing logic.
Differential Revision: https://reviews.llvm.org/D47153
llvm-svn: 333307
Re-add the feature flag for invpcid, which was removed in r294561.
Add an intrinsic, which always uses a 32 bit integer as first argument,
while the instruction actually uses a 64 bit register in 64 bit mode
for the INVPCID_TYPE argument.
Reviewers: craig.topper
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D47141
llvm-svn: 333255
Forgot to move the CommandLine.h include form the implementation to the
header and didn't notice the failure with my local modules build.
llvm-svn: 333177
This commit adds a color category so tools can document this option and
enables it for dwarfdump and dsymuttil.
rdar://problem/40498996
llvm-svn: 333176
The return value of sys::getDefaultTargetTriple, which is derived from
-DLLVM_DEFAULT_TRIPLE, is used to construct tool names, default target,
and in the future also to control the search path directly; as such it
should be used textually, without interpretation by LLVM.
Normalization of this value may lead to unexpected results, for example
if we configure LLVM with -DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-linux-gnu,
normalization will transform that value to x86_64--linux-gnu. Driver will
use that value to search for tools prefixed with x86_64--linux-gnu- which
may be confusing. This is also inconsistent with the behavior of the
--target flag which is taken as-is without any normalization and overrides
the value of LLVM_DEFAULT_TARGET_TRIPLE.
Users of sys::getDefaultTargetTriple already perform their own
normalization as needed, so this change shouldn't impact existing logic.
Differential Revision: https://reviews.llvm.org/D46910
llvm-svn: 332750
This patch aims to match the changes introduced in gcc by
https://gcc.gnu.org/ml/gcc-cvs/2018-04/msg00534.html. The
IBT feature definition is removed, with the IBT instructions
being freely available on all X86 targets. The shadow stack
instructions are also being made freely available, and the
use of all these CET instructions is controlled by the module
flags derived from the -fcf-protection clang option. The hasSHSTK
option remains since clang uses it to determine availability of
shadow stack instruction intrinsics, but it is no longer directly used.
Comes with a clang patch (D46881).
Patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D46882
llvm-svn: 332705
Summary:
This is needed for the continuation of D46504,
to be able to store the timings.
Reviewers: george.karpenkov, NoQ, alexfh, sbenza
Reviewed By: alexfh
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D46939
llvm-svn: 332506
Summary:
This is needed for the continuation of D46504,
to be able to store the timings.
Reviewers: george.karpenkov, NoQ, alexfh, sbenza
Reviewed By: alexfh
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D46938
llvm-svn: 332505
Summary:
Although this is not stricly required, i would very much prefer
not to have known random precision losses along the way.
Reviewers: george.karpenkov, NoQ, alexfh, sbenza
Reviewed By: george.karpenkov
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D46937
llvm-svn: 332504
Summary: We have just used `.sys` suffix for the previous timer, this is clearly a typo
Reviewers: george.karpenkov, NoQ, alexfh, sbenza
Reviewed By: alexfh
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D46936
llvm-svn: 332503
Summary:
Before this patch, signal handling wasn't signal safe. This leads to real-world
crashes. It used ManagedStatic inside of signals, this can allocate and can lead
to unexpected state when a signal occurs during llvm_shutdown (because
llvm_shutdown destroys the ManagedStatic). It also used cl::opt without custom
backing storage. Some de-allocation was performed as well. Acquiring a lock in a
signal handler is also a great way to deadlock.
We can't just disable signals on llvm_shutdown because the signals might do
useful work during that shutdown. We also can't just disable llvm_shutdown for
programs (instead of library uses of clang) because we'd have to then mark the
pointers as not leaked and make sure all the ManagedStatic uses are OK to leak
and remain so.
Move all of the code to lock-free datastructures instead, and avoid having any
of them in an inconsistent state. I'm not trying to be fancy, I'm not using any
explicit memory order because this code isn't hot. The only purpose of the
atomics is to guarantee that a signal firing on the same or a different thread
doesn't see an inconsistent state and crash. In some cases we might miss some
state (for example, we might fail to delete a temporary file), but that's fine.
Note that I haven't touched any of the backtrace support despite it not
technically being totally signal-safe. When that code is called we know
something bad is up and we don't expect to continue execution, so calling
something that e.g. sets errno is the least of our problems.
A similar patch should be applied to lib/Support/Windows/Signals.inc, but that
can be done separately.
Fix r332428 which I reverted in r332429. I originally used double-wide CAS
because I was lazy, but some platforms use a runtime function for that which
thankfully failed to link (it would have been bad for signal handlers
otherwise). I use a separate flag to guard the data instead.
<rdar://problem/28010281>
Reviewers: dexonsmith
Subscribers: steven_wu, llvm-commits
llvm-svn: 332496
Summary:
Before this patch, signal handling wasn't signal safe. This leads to real-world
crashes. It used ManagedStatic inside of signals, this can allocate and can lead
to unexpected state when a signal occurs during llvm_shutdown (because
llvm_shutdown destroys the ManagedStatic). It also used cl::opt without custom
backing storage. Some de-allocation was performed as well. Acquiring a lock in a
signal handler is also a great way to deadlock.
We can't just disable signals on llvm_shutdown because the signals might do
useful work during that shutdown. We also can't just disable llvm_shutdown for
programs (instead of library uses of clang) because we'd have to then mark the
pointers as not leaked and make sure all the ManagedStatic uses are OK to leak
and remain so.
Move all of the code to lock-free datastructures instead, and avoid having any
of them in an inconsistent state. I'm not trying to be fancy, I'm not using any
explicit memory order because this code isn't hot. The only purpose of the
atomics is to guarantee that a signal firing on the same or a different thread
doesn't see an inconsistent state and crash. In some cases we might miss some
state (for example, we might fail to delete a temporary file), but that's fine.
Note that I haven't touched any of the backtrace support despite it not
technically being totally signal-safe. When that code is called we know
something bad is up and we don't expect to continue execution, so calling
something that e.g. sets errno is the least of our problems.
A similar patch should be applied to lib/Support/Windows/Signals.inc, but that
can be done separately.
<rdar://problem/28010281>
Reviewers: dexonsmith
Subscribers: aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D46858
llvm-svn: 332428
As requested in D46858, pulling this function into its own lambda makes it
easier to read that part of the code and reason as to what's going on because
the scope it can be called from is extremely limited. We want to keep it as a
function because it's called from the two subsequent lines.
llvm-svn: 332325
Summary:
bugpoint has several options specified as `PositionalEatArgs` to pass
options through to the underlying tool, e.g. `-tool-args`. The `-help`
message suggests the usage is: `-tool-args=<string>`. However, this is
misleading, because that's not how these arguments work. Rather than taking
a value, the option consumes all positional arguments until the next
recognized option (or all arguments if `--` is specified at some point).
To make this slightly clearer, instead print the help as:
```
-tool-args <string>... - <tool arguments>...
```
Additionally, add an error if the user attempts to use a `PositionalEatArgs`
argument with a value, instead of silently ignoring it. Example:
```
./bin/bugpoint -tool-args=-mpcu=skylake-avx512
bugpoint: for the -tool-args option: This argument does not take a value.
Instead, it consumes any positional arguments until the next recognized option.
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D46787
llvm-svn: 332311
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Summary:
r271558 moved getManagedStaticMutex's mutex from a function-local
static to using call_once, but left a comment added in r211424. That comment is
now erroneous, remove it.
Reviewers: zturner, chandlerc
Subscribers: aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D46784
llvm-svn: 332175
losesInfo would be left unset when no conversion needs to be done. A
caller such as InstCombine's fitsInFPType would then branch on an
uninitialized value.
Caught using valgrind on an out-of-tree target.
Differential Revision: https://reviews.llvm.org/D46645
llvm-svn: 332087
Summary:
Add documentation for the LLVM Support functions `openFileForWrite` and
`openFileForRead`. The `openFileForRead` parameter `RealPath`, in
particular, I think warranted some explanation.
In addition, make the behavior of the functions more consistent across
platforms. Prior to this patch, Windows would set or not set the result
file descriptor based on the nature of the error, whereas Unix would
consistently set it to `-1` if the open failed. Make Windows
consistently set it to `-1` as well.
Test Plan:
1. `ninja check-llvm`
2. `ninja docs-llvm-html`
Reviewers: zturner, rnk, danielmartin, scanon
Reviewed By: danielmartin, scanon
Subscribers: scanon, danielmartin, llvm-commits
Differential Revision: https://reviews.llvm.org/D46499
llvm-svn: 332075
Summary:
Unnormal values are a feature of some very old x87 processors. We handle
them correctly for the most part -- the only exception was an unnormal
value whose significand happened to be zero. In this case the APFloat
was still initialized as normal number (category = fcNormal), but a
subsequent toString operation would assert because the math would
produce nonsensical values for the zero significand.
During review, it was decided that the correct way to fix this is to
treat all unnormal values as NaNs (as that is what any >=386 processor
will do).
The issue was discovered because LLDB would crash when trying to print
some "long double" values.
Reviewers: skatkov, scanon, gottesmm
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41868
llvm-svn: 331884
Summary:
Various path functions were not treating paths consisting of slashes
alone consistently. For example, the iterator-based accessors decomposed the
path "///" into two elements: "/" and ".". This is not too bad, but it
is different from the behavior specified by posix:
```
A pathname that contains ***at least one non-slash character*** and that
ends with one or more trailing slashes shall be resolved as if a single
dot character ( '.' ) were appended to the pathname.
```
More importantly, this was different from how we treated the same path
in the filename+parent_path functions, which decomposed this path into
"." and "". This was completely wrong as it lost the information that
this was an absolute path which referred to the root directory.
This patch fixes this behavior by making sure all functions treat paths
consisting of (back)slashes alone the same way as "/". I.e., the
iterator-based functions will just report one component ("/"), and the
filename+parent_path will decompose them into "/" and "".
A slightly controversial topic here may be the treatment of "//". Posix
says that paths beginning with "//" may have special meaning and indeed
we have code which parses paths like "//net/foo/bar" specially. However,
as we were already not being consistent in parsing the "//" string
alone, and any special parsing for it would complicate the code further,
I chose to treat it the same way as longer sequences of slashes (which
are guaranteed to be the same as "/").
Another slight change of behavior is in the parsing of paths like
"//net//". Previously the last component of this path was ".". However,
as in our parsing the "//net" part in this path was the same as the
"drive" part in "c:\" and the next slash was the "root directory", it
made sense to treat "//net//" the same way as "//net/" (i.e., not to add
the extra "." component at the end).
Reviewers: zturner, rnk, dblaikie, Bigcheese
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45942
llvm-svn: 331876
The RWMutex implementation depends on config.h macros (specifically
HAVE_PTHREAD_H and HAVE_PTHREAD_RWLOCK_INIT), so we need to be
including it and not just llvm-config.h here or we fall back to a much
slower implementation.
llvm-svn: 331487
These are necessary changes to support building LLVM for Fuchsia.
While these are not sufficient to run on Fuchsia, they are still
useful when cross-compiling LLVM libraries and runtimes for Fuchsia.
Differential Revision: https://reviews.llvm.org/D46345
llvm-svn: 331423
This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
llvm-svn: 331275
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
This moves over all uses of the macro, but doesn't remove the definition
of it in (llvm-)config.h yet.
llvm-svn: 331127
The main goal of this change is to make it much easier to track which
rules are actually covered by Testgen'erated regression tests.
Reviewers: aemerson, dsanders
Differential Revision: https://reviews.llvm.org/D46095
llvm-svn: 330988
Several tools prefix the error/warning/note output with the name of the
tool. One such tool is LLD for example. This commit adds as an optional
'Prefix' argument to the convenience helpers.
llvm-svn: 330526
Three new instructions:
umonitor - Sets up a linear address range to be
monitored by hardware and activates the monitor.
The address range should be a writeback memory
caching type.
umwait - A hint that allows the processor to
stop instruction execution and enter an
implementation-dependent optimized state
until occurrence of a class of events.
tpause - Directs the processor to enter an
implementation-dependent optimized state
until the TSC reaches the value in EDX:EAX.
Also modifying the description of the mfence
instruction, as the rep prefix (0xF3) was allowed
before, which would conflict with umonitor during
disassembly.
Before:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
mfence
After:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
umonitor %rax
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45253
llvm-svn: 330462
Path.inc/widenPath tries to decode the path using both UTF-8 and the default Windows code page.
This is no longer necessary with the new InitLLVM method which ensures that the command line
arguemnts are already UTF-8 on Windows.
llvm-svn: 330266
Summary:
Due to some android peculiarities, in some build configurations
(statically linked executables targeting older releases) we could detect
the presence of these functions (because they are present in libc.a,
where check_library_exists searches), but then fail to build because the
headers did not include the definition.
This attempts to remedy that by upgrading the check_library_exists to
check_symbol_exists, which will check that the function is declared too.
I am hoping that a more thorough check will make the messy #ifdef we
have accumulated in the code obsolete, so I optimistically try to remove
them.
Reviewers: zturner, kparzysz, danalbert
Subscribers: srhines, mgorny, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D45359
llvm-svn: 330251
Summary:
Statistic and ManagedStatic both use mutexes. There was a lock order
inversion where, during initialization, Statistic's mutex would be
held while taking ManagedStatic's, and in llvm_shutdown,
ManagedStatic's mutex would be held while taking Statistic's
mutex. This change causes Statistic's initialization code to avoid
holding its mutex while calling ManagedStatic's methods, avoiding the
inversion.
Reviewers: dsanders, rtereshin
Reviewed By: dsanders
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45398
llvm-svn: 330236
GetArgumentVector (or GetCommandLineArguments) is very Windows-specific.
I think it doesn't make much sense to provide that function from sys::Process.
I also made a change so that the function takes a BumpPtrAllocator
instead of a SpecificBumpPtrAllocator. The latter is the class to call
dtors, but since char * is trivially destructible, we should use the
former class.
Differential Revision: https://reviews.llvm.org/D45641
llvm-svn: 330216
Using Goldmont's cost tables for these two upcoming
atom archs.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45612
llvm-svn: 330109
Summary: As discussed in https://reviews.llvm.org/D45606, it makes more sense to name the class as SmallVectorMemoryBuffer
Reviewers: bkramer, dblaikie
Reviewed By: dblaikie
Subscribers: mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D45661
llvm-svn: 330107
Summary:
Since the class is used by both MCJIT and LTO, it makes more sense to move it to Support lib.
This is a follow up patch to r329929 and https://reviews.llvm.org/D45244
Reviewers: bkramer, dblaikie
Reviewed By: bkramer
Subscribers: mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D45606
llvm-svn: 330093
Create convenience functions for printing error, warning and note to
stdout. Previously we had similar functions being used in dsymutil, but
given that this pattern is so common it makes sense to make it available
globally.
llvm-svn: 330091
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
Hint to hardware to move the cache line containing the
address to a more distant level of the cache without
writing back to memory.
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45256
llvm-svn: 329992
The commit in SVN r310001 that added support for this actually didn't
use the right struct field for the frame pointer - for ARM, there is
no register named Fp in the CONTEXT struct. On Windows, the R11
register is used as frame pointer.
Differential Revision: https://reviews.llvm.org/D45590
llvm-svn: 329991
Similar to the wbinvd instruction, except this
one does not invalidate caches. Ring 0 only.
The encoding matches a wbinvd instruction with
an F3 prefix.
Reviewers: craig.topper, zvi, ashlykov
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D43816
llvm-svn: 329847
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: chandlerc, jordan_rose, bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45140
llvm-svn: 329536
Summary:
The LLVM SourceMgr class (which is used indirectly by Swift, though not Clang)
has a routine for looking up line numbers of SMLocs. This routine uses a
shared, special-purpose cache that handles exactly one access pattern
efficiently: looking up the line number of an SMLoc that points into the same
buffer as the last query made to the SourceMgr, at a location in the buffer at
or ahead of the last query.
When this works it's fine, but when it fails it's catastrophic for performancer:
one recent out-of-order access from a Swift utility routine ran for tens of
seconds, spending 99% of its time repeatedly scanning buffers for '\n'.
This change removes the shared cache from the SourceMgr and installs a new
cache in each SrcBuffer. The per-SrcBuffer caches are also "full", in the sense
that rather than caching a single last-query pointer, they cache _all_ the
line-ending offsets, in a binary-searchable array, such that once it's
populated (on first access), all subsequent access patterns run at the same
speed.
Performance measurements I've done show this is actually a little bit faster on
real codebases (though only a couple fractions of a percent). Memory usage is
up by a few tens to hundreds of bytes per SrcBuffer that has a line lookup done
on it; I've attempted to minimize this by using dynamic selection of integer
sized when storing offset arrays. But the main motive here is to
make-impossible the cases we don't always see, that show up by surprise when
there is an out-of-order access pattern.
Reviewers: jordan_rose
Reviewed By: jordan_rose
Subscribers: probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D45003
llvm-svn: 329470
Llvm-mc (and tools that use Path.inc on Windows) assume that strings are utf-8
encoded, however, this is not always the case. On Windows the default codepage
is not utf-8, so most of the time the strings are not utf-8 encoded.
The lld test 'format-binary-non-ascii' uses llvm-mc with a file with non-ascii
characters in the name which is how this bug was found. The test fails when run
using Python 3 because it uses properly encoded unicode strings (Python 2 actually
ends up using a byte string which is not utf-8 encoded, so the test passes, but
that's separate issue).
Patch by Stella Stamenova!
llvm-svn: 329468
The implementation of shadow call stack on aarch64 is quite different to
the implementation on x86_64. Instead of reserving a segment register for
the shadow call stack, we reserve the platform register, x18. Any function
that spills lr to sp also spills it to the shadow call stack, a pointer to
which is stored in x18.
Differential Revision: https://reviews.llvm.org/D45239
llvm-svn: 329236
These used to be set in the old autoconf build, but the cmake build has had a
"TODO: actually check for these" comment since it was checked in, and they
were set to 1 on mingw unconditionally. It seems safe to say that they always
exist under mingw, so just remove them and assume they're set exactly when on
mingw (with msvc, we use `pragma comment` instead of linking these via flags).
llvm-svn: 328992
The autoconf manual: "This macro is obsolescent, as all current systems with
directory libraries have <dirent.h>. New programs need not use this macro."
llvm-svn: 328989
The existing YAML Output::scalarString code path includes a partial and
incorrect implementation of YAML escaping logic. In particular, the logic put
in place in rL321283 escapes non-printable bytes only if they are not part of a
multibyte UTF8 sequence; implicitly this means that all multibyte UTF8
sequences -- printable and non -- are passed through verbatim.
The simplest solution to this is to direct the Output::scalarString method to
use the standalone yaml::escape function, and this _almost_ works, except that
the existing code in that function _over_ escapes: any multibyte UTF8 sequence
is escaped, even printable ones. While this is permitted for YAML, it is also
more aggressive (and hard to read for non-English locales) than necessary,
and the entire point of rL321283 was to back off such aggressive over-escaping.
So in this change, I have both redirected Output::scalarString to use
yaml::escape _and_ modified yaml::escape to optionally restrict its escaping to
non-printables. This preserves behaviour of any existing clients while giving
them a path to more moderate escaping should they desire.
Reviewers: JDevlieghere, thegameg, MatzeB, vladimir.plyashkun
Reviewed By: thegameg
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44863
llvm-svn: 328661
- Remove use of the opencl and amdopencl environment member of the target triple for the AMDGPU target.
- Use function attribute to communicate to the AMDGPU backend to add implicit arguments for OpenCL kernels for the AMDHSA OS.
Differential Revision: https://reviews.llvm.org/D43736
llvm-svn: 328349
Summary:
This commit changes semantics of createUniqueFile and
createTemporaryFile variants that do not return file descriptors.
Previously they only checked if files exist, therefore being subject
to race conditions. Now they will create an empty file to avoid them.
Functions that do not create a file are now called
getPotentiallyUniqueTempFileName and getPotentiallyUniqueFileName.
Reviewers: klimek, bkramer, krasimir, JDevlieghere, espindola
Reviewed By: klimek
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36827
llvm-svn: 327851
After r327219 was landed, the bot with expensive checks on GreenDragon
started failing. The problem was missing symbols `regex_t` and
`regmatch_t` in `xlocale/_regex.h`. The latter was included because
after the change in r327219, `random` is needed, which transitively
includes `xlocale.h.` which in turn conditionally includes
`xlocale/_regex.h` when _REGEX_H_ is defined. Because this is the header
guard in `regex_impl.h` and because `regex_impl.h` was included before
the other LLVM includes, `xlocale/_regex.h` was included without the
necessary types being available.
This commit fixes this by moving the include of `regex_impl.h` all the
way down. I also added a comment to stress the significance of its
position.
llvm-svn: 327256
Move the DWARF syntax highlighting into support. This has several
advantages, most notably that this makes the WithColor RAII wrapper
available outside libDebugInfo. Furthermore, several projects all have
their own code for handling colored output. This provides a place to
centralize it.
Differential revision: https://reviews.llvm.org/D44215
llvm-svn: 327108
This is like MemoryBuffer (read-only) and WritableMemoryBuffer
(writable private), but where the underlying file can be modified
after writing. This is useful when you want to open a file, make
some targeted edits, and then write it back out.
Differential Revision: https://reviews.llvm.org/D44230
llvm-svn: 327057
Summary:
Most of the time, compiler statistics can be obtained using a process that
performs a single compilation and terminates such as llc. However, this isn't
always the case. JITs for example, perform multiple compilations over their
lifetime and STATISTIC() will record cumulative values across all of them.
Provide tools like this with the facilities needed to measure individual
compilations by allowing them to reset the STATISTIC() values back to zero using
llvm::ResetStatistics(). It's still the tools responsibility to ensure that they
perform compilations in such a way that the results are meaningful to their
intended use.
Reviewers: qcolombet, rtereshin, bogner, aditya_nandakumar
Reviewed By: bogner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44181
llvm-svn: 326981
I think most of the Intel Core CPUs and recent AMD CPUs are unaffected. All the CPUs that have a "subtype" should work. The ones that were broken are the ones that are a "type" with no subtypes.
Fixes PR36619.
llvm-svn: 326840
These two functions iterate over the list of statistics but don't take the lock
that protects the iterators from being invalidated by
StatisticInfo::addStatistic().
So far, this hasn't been an issue since (in-tree at least) these functions are
called by the StatisticInfo destructor so addStatistic() shouldn't be called
anymore. However, we do expose them in the public API.
Note that this only protects against iterator invalidation and does not protect
against ordering issues caused by statistic updates that race with
PrintStatistics()/PrintStatisticsJSON().
Thanks to Roman Tereshin for spotting it
llvm-svn: 326834
Summary:
It can be useful for tools to be able to retrieve the values of variables
declared via STATISTIC() directly without having to emit them and parse
them back. Use cases include:
* Needing to report specific statistics to a test harness
* Wanting to post-process statistics. For example, to produce a percentage of
functions that were fully selected by GlobalISel
Make this possible by adding llvm::GetStatistics() which returns an
iterator_range that can be used to inspect the statistics that have been
touched during execution. When statistics are disabled (NDEBUG and not
LLVM_ENABLE_STATISTICS) this method will return an empty range.
This patch doesn't address the effect of multiple compilations within the same
process. In such situations, the statistics will be cumulative for all
compilations up to the GetStatistics() call.
Reviewers: qcolombet, rtereshin, aditya_nandakumar, bogner
Reviewed By: rtereshin, bogner
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D43901
This re-commit fixes a missing include of <vector> which it seems clang didn't
mind but G++ and MSVC objected to. It seems that, clang was ok with std::vector
only being forward declared at the point of use since it was fully defined
eventually but G++/MSVC both rejected it at the point of use.
llvm-svn: 326738
Despite building cleanly on my machine in three separate configs, it's failing on pretty much all bots due to missing includes among other things. Investigating.
llvm-svn: 326726
Summary:
It can be useful for tools to be able to retrieve the values of variables
declared via STATISTIC() directly without having to emit them and parse
them back. Use cases include:
* Needing to report specific statistics to a test harness
* Wanting to post-process statistics. For example, to produce a percentage of
functions that were fully selected by GlobalISel
Make this possible by adding llvm::GetStatistics() which returns an
iterator_range that can be used to inspect the statistics that have been
touched during execution. When statistics are disabled (NDEBUG and not
LLVM_ENABLE_STATISTICS) this method will return an empty range.
This patch doesn't address the effect of multiple compilations within the same
process. In such situations, the statistics will be cumulative for all
compilations up to the GetStatistics() call.
Reviewers: qcolombet, rtereshin, aditya_nandakumar, bogner
Reviewed By: rtereshin, bogner
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D43901
llvm-svn: 326723
Summary:
For various reasons, CMake's detection mechanism for `backtrace()`
returns an absolute path `/usr/lib/libexecinfo.so` on FreeBSD and
NetBSD.
Since `tools/llvm-config/CMakeLists.txt` only checks if system
libraries start with `-`, this causes `llvm-config --system-libs` to
produce the following incorrect output:
```
-lrt -l/usr/lib/libexecinfo.so -ltinfo -lpthread -lz -lm
```
Fix it by removing the path and the `lib` prefix, to make it look like a
regular short library name, suitable for appending to a `-l` link flag.
This also fixes the `Bindings/Go/go.test` test case, since that always
died with "unable to find library -l/usr/lib/libexecinfo.so".
Reviewers: chandlerc, emaste, joerg, krytarowski
Reviewed By: krytarowski
Subscribers: hans, bdrewery, mgorny, hintonda, llvm-commits
Differential Revision: https://reviews.llvm.org/D42702
llvm-svn: 326358
Until this patch, only `powerpc` and `ppc32` were recognized as valid
PowerPC 32-bit architectures in a target triple. This was incompatible
with the triple `ppc-apple-darwin` as returned for libObject. I found
out about this when working on a test case using a binary generated on
an old PowerBook G4.
We had the choice of either fix this in the Mach-O object parser or
in the Triple implementation. I chose the latter because it feels like
the most canonical place.
Differential revision: https://reviews.llvm.org/D43760
llvm-svn: 326182
This patch removes the HashString function from StringExtraces and
replaces its uses with calls to djbHash from DJB.h.
This change is *almost* NFC. While the algorithm is identical, the
djbHash implementation in StringExtras used 0 as its default seed while
the implementation in DJB uses 5381. The latter has been shown to result
in less collisions and improved avalanching and is used by the DWARF
accelerator tables.
Because some test were implicitly relying on the hash order, I've
reverted to using zero as a seed for the following two files:
lld/include/lld/Core/SymbolTable.h
llvm/lib/Support/StringMap.cpp
Differential revision: https://reviews.llvm.org/D43615
llvm-svn: 326091
It looks like some of our tests depend on the ordering of hashed values.
I'm reverting my changes while I try to reproduce and fix this locally.
Failing builds:
lab.llvm.org:8011/builders/lld-x86_64-darwin13/builds/18388
lab.llvm.org:8011/builders/clang-cmake-x86_64-sde-avx512-linux/builds/6743
lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast/builds/15607
llvm-svn: 326082
This removes the HashString function from StringExtraces and replaces
its uses with calls to djbHash from DJB.h
This is *almost* NFC. While the algorithm is identical, the djbHash
implementation in StringExtras used 0 as its seed while the
implementation in DJB uses 5381. The latter has been shown to result in
less collisions and improved avalanching.
https://reviews.llvm.org/D43615
(cherry picked from commit 77f7f965bc9499a9ae768a296ca5a1f7347d1d2c)
llvm-svn: 326081
The issue was that the has function was generating different results depending
on the signedness of char on the host platform. This commit fixes the issue by
explicitly using an unsigned char type to prevent sign extension and
adds some extra tests.
The original commit message was:
This patch implements a variant of the DJB hash function which folds the
input according to the algorithm in the Dwarf 5 specification (Section
6.1.1.4.5), which in turn references the Unicode Standard (Section 5.18,
"Case Mappings").
To achieve this, I have added a llvm::sys::unicode::foldCharSimple
function, which performs this mapping. The implementation of this
function was generated from the CaseMatching.txt file from the Unicode
spec using a python script (which is also included in this patch). The
script tries to optimize the function by coalescing adjecant mappings
with the same shift and stride (terms I made up). Theoretically, it
could be made a bit smarter and merge adjecant blocks that were
interrupted by only one or two characters with exceptional mapping, but
this would save only a couple of branches, while it would greatly
complicate the implementation, so I deemed it was not worth it.
Since we assume that the vast majority of the input characters will be
US-ASCII, the folding hash function has a fast-path for handling these,
and only whips out the full decode+fold+encode logic if we encounter a
character outside of this range. It might be possible to implement the
folding directly on utf8 sequences, but this would also bring a lot of
complexity for the few cases where we will actually need to process
non-ascii characters.
Reviewers: JDevlieghere, aprantl, probinson, dblaikie
Subscribers: mgorny, hintonda, echristo, clayborg, vleschuk, llvm-commits
Differential Revision: https://reviews.llvm.org/D42740
llvm-svn: 325732
This is the second part of recommit of r325224. The previous part was
committed in r325426, which deals with C++ memory allocation. Solution
for C memory allocation involved functions `llvm::malloc` and similar.
This was a fragile solution because it caused ambiguity errors in some
cases. In this commit the new functions have names like `llvm::safe_malloc`.
The relevant part of original comment is below, updated for new function
names.
Analysis of fails in the case of out of memory errors can be tricky on
Windows. Such error emerges at the point where memory allocation function
fails, but manifests itself when null pointer is used. These two points
may be distant from each other. Besides, next runs may not exhibit
allocation error.
In some cases memory is allocated by a call to some of C allocation
functions, malloc, calloc and realloc. They are used for interoperability
with C code, when allocated object has variable size and when it is
necessary to avoid call of constructors. In many calls the result is not
checked for null pointer. To simplify checks, new functions are defined
in the namespace 'llvm': `safe_malloc`, `safe_calloc` and `safe_realloc`.
They behave as corresponding standard functions but produce fatal error if
allocation fails. This change replaces the standard functions like 'malloc'
in the cases when the result of the allocation function is not checked
for null pointer.
Finally, there are plain C code, that uses malloc and similar functions. If
the result is not checked, assert statement is added.
Differential Revision: https://reviews.llvm.org/D43010
llvm-svn: 325551
Summary: We probably mostly get this right due to family/model/stepping mapping to CPU names. But we should detect it explicitly.
Reviewers: RKSimon, echristo, dim, spatel
Reviewed By: dim
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43418
llvm-svn: 325439
This is partial recommit of r325224, reverted in 325227. The relevant
part of original comment is below.
Analysis of fails in the case of out of memory errors can be tricky on
Windows. Such error emerges at the point where memory allocation function
fails, but manifests itself when null pointer is used. These two points
may be distant from each other. Besides, next runs may not exhibit
allocation error.
Usual programming practice does not require checking result of 'operator
new' because it throws 'std::bad_alloc' in the case of allocation error.
However, LLVM is usually built with exceptions turned off, so 'new' can
return null pointer. This change installs custom new handler, which causes
fatal error in the case of out of memory. The handler is installed
automatically prior to call to 'main' during construction of a static
object defined in 'lib/Support/ErrorHandling.cpp'. If the application does
not use this file, the handler may be installed manually by a call to
'llvm::install_out_of_memory_new_handler', declared in
'include/llvm/Support/ErrorHandling.h".
Differential Revision: https://reviews.llvm.org/D43010
llvm-svn: 325426
Summary: extractBits assumes that `!this->isSingleWord() implies !Result.isSingleWord()`, which may not necessarily be true. Handle both cases.
Reviewers: RKSimon
Subscribers: sanjoy, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43363
llvm-svn: 325311
There is a latent Windows kernel bug, the exact trigger
conditions are not well understood, which can cause a file
to be correctly written, but unable to be correctly read.
The workaround appears to be simply calling FlushFileBuffers.
Differential Revision: https://reviews.llvm.org/D42925
llvm-svn: 325274
Analysis of fails in the case of out of memory errors can be tricky on
Windows. Such error emerges at the point where memory allocation function
fails, but manifests itself when null pointer is used. These two points
may be distant from each other. Besides, next runs may not exhibit
allocation error.
Usual programming practice does not require checking result of 'operator
new' because it throws 'std::bad_alloc' in the case of allocation error.
However, LLVM is usually built with exceptions turned off, so 'new' can
return null pointer. This change installs custom new handler, which causes
fatal error in the case of out of memory. The handler is installed
automatically prior to call to 'main' during construction of a static
object defined in 'lib/Support/ErrorHandling.cpp'. If the application does
not use this file, the handler may be installed manually by a call to
'llvm::install_out_of_memory_new_handler', declared in
'include/llvm/Support/ErrorHandling.h".
There are calls to C allocation functions, malloc, calloc and realloc.
They are used for interoperability with C code, when allocated object has
variable size and when it is necessary to avoid call of constructors. In
many calls the result is not checked against null pointer. To simplify
checks, new functions are defined in the namespace 'llvm' with the
same names as these C function. These functions produce fatal error if
allocation fails. User should use 'llvm::malloc' instead of 'std::malloc'
in order to use the safe variant. This change replaces 'std::malloc'
in the cases when the result of allocation function is not checked against
null pointer.
Finally, there are plain C code, that uses malloc and similar functions. If
the result is not checked, assert statements are added.
Differential Revision: https://reviews.llvm.org/D43010
llvm-svn: 325224
Summary:
This patch implements a variant of the DJB hash function which folds the
input according to the algorithm in the Dwarf 5 specification (Section
6.1.1.4.5), which in turn references the Unicode Standard (Section 5.18,
"Case Mappings").
To achieve this, I have added a llvm::sys::unicode::foldCharSimple
function, which performs this mapping. The implementation of this
function was generated from the CaseMatching.txt file from the Unicode
spec using a python script (which is also included in this patch). The
script tries to optimize the function by coalescing adjecant mappings
with the same shift and stride (terms I made up). Theoretically, it
could be made a bit smarter and merge adjecant blocks that were
interrupted by only one or two characters with exceptional mapping, but
this would save only a couple of branches, while it would greatly
complicate the implementation, so I deemed it was not worth it.
Since we assume that the vast majority of the input characters will be
US-ASCII, the folding hash function has a fast-path for handling these,
and only whips out the full decode+fold+encode logic if we encounter a
character outside of this range. It might be possible to implement the
folding directly on utf8 sequences, but this would also bring a lot of
complexity for the few cases where we will actually need to process
non-ascii characters.
Reviewers: JDevlieghere, aprantl, probinson, dblaikie
Subscribers: mgorny, hintonda, echristo, clayborg, vleschuk, llvm-commits
Differential Revision: https://reviews.llvm.org/D42740
llvm-svn: 325107
Currently, each LLVM timer can be only printed once, as the act of
printing clears the timer.
Moreover, the current printing mechanism implicitly assumes that the
timer is stopped -- and prints zero otherwise.
This patch relaxes this assumption and makes printing statistics
multiple time a possibility.
Differential Revision: https://reviews.llvm.org/D43136
llvm-svn: 324788
This is a support change for a CFE change (https://reviews.llvm.org/D42978)
that allows march and -target-cpu to list the valid targets in a note. The changes
are limited to the ARM/AArch64, since this is the only target that gets the CPU
list from LLVM.
llvm-svn: 324623
This is a bit faster in theory, in practice it's cold code that's only
active in !NDEBUG, so it probably doesn't make a difference. This is one
of the last users of our homegrown Atomic.h.
llvm-svn: 323999
This patch moves the DJB hash to support. This is consistent with other
hashing algorithms living there. The hash is used by the DWARF
accelerator tables. We're doing this now because the hashing function is
needed by dsymutil and we don't want to link against libBinaryFormat.
Differential revision: https://reviews.llvm.org/D42594
llvm-svn: 323616
This makes wasm32-unknown-unknown-wasm the default, which supports
the .o file writer and the new linking ABI. To enable s2wasm-compatible
output, use the wasm32-unknown-unknown-elf triple.
llvm-svn: 323220
The original change was made based on a misunderstanding that
-DCMAKE_BUILD_TYPE=RelWithDebugInfo would produce the same executable
as -DCMAKE_BUILD_TYPE=Release modulo debug info. Turned out that's not
true -- it at least disables some optimizations such as function inlining.
llvm-svn: 323161
Try to detect the terminal color support by checking the value of the
TERM environment variable. This is not great, but it's better than
nothing when terminfo library isn't available, which may still be the
case on some Linux distributions.
Differential Revision: https://reviews.llvm.org/D42055
llvm-svn: 322962
This adds a new instrinsic to support the rdpid instruction. The implementation is a bit weird because the intrinsic is defined as always returning 32-bits, but the assembler support thinks the instruction produces a 64-bit register in 64-bit mode. But really it zeros the upper 32 bits. So I had to add separate patterns where 64-bit mode uses an extract_subreg.
Differential Revision: https://reviews.llvm.org/D42205
llvm-svn: 322910
We seem to be (logically) returning ArchExtKinds here in all cases, so
the return type should reflect that.
The static_cast is necessary because `A.ID` is actually an `unsigned`,
presumably since we use `decltype(A)` to represent extended attributes
for both ARM and AArch64, which use distinct `ArchExtKinds`.
We can't trivially make the same change for ARM, because one of the
values it returns is the bitwise-or of two `ARM::ArchExtKind`s.
llvm-svn: 322613
Patch by Takuto Ikuta.
In chromium's component build, there are many directive sections and
commandline parsing takes much time.
This patch is for speed up of lld in RelWithDebInfo build by forcing
inline heavily called isWhitespace function.
10 times link perf stats of blink_core.dll changed like below.
master:
TotalSeconds: 9.8764878
TotalSeconds: 10.1455242
TotalSeconds: 10.075279
TotalSeconds: 10.3397347
TotalSeconds: 9.8361665
TotalSeconds: 9.9544441
TotalSeconds: 9.8960686
TotalSeconds: 9.8877865
TotalSeconds: 10.0551879
TotalSeconds: 10.0492254
Avg: 10.01159047
with this patch:
TotalSeconds: 8.8696762
TotalSeconds: 9.1021585
TotalSeconds: 9.0233893
TotalSeconds: 9.1886175
TotalSeconds: 9.156954
TotalSeconds: 9.0978564
TotalSeconds: 9.1316824
TotalSeconds: 8.8354606
TotalSeconds: 9.2549431
TotalSeconds: 9.4473085
Avg: 9.11080465
llvm-svn: 322595
This change adds the missing armv8l variant as an alias of armv8 architecture.
The issue was observed with several regressions in validation on armv8l
hardware (for instance ExecutionEngine/frem.ll failed due to lack of neon fpu).
Tested with regression testsuite passed without regression on ARM and x86_64.
Patch by Yvan Roux.
Reviewers: rengolin, rogfer01, olista01, fhahn
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D41859
llvm-svn: 322098
Summary:
The idea is that it would replace
(non-Writable)MemoryBuffer::getNewMemBuffer, which is quite useless
unless you const_cast its contents to write to it (which all (both)
callers of this function were doing). This patch also fixes one of the usages in
COFFWriter. After fixing the other usage in clang, I plan to delete the old
function.
Reviewers: dblaikie, Bigcheese
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41540
llvm-svn: 322094
Configuration file is read as a response file in which file names in
the nested constructs `@file` are resolved relative to the directory
where the including file resides. Lines in which the first non-whitespace
character is '#' are considered as comments and are skipped. Trailing
backslashes are used to concatenate lines in the same way as they
are used in shell scripts.
Differential Revision: https://reviews.llvm.org/D24926
llvm-svn: 321586
Configuration file is read as a response file in which file names in
the nested constructs `@file` are resolved relative to the directory
where the including file resides. Lines in which the first non-whitespace
character is '#' are considered as comments and are skipped. Trailing
backslashes are used to concatenate lines in the same way as they
are used in shell scripts.
Differential Revision: https://reviews.llvm.org/D24926
llvm-svn: 321580
Patcy by Takuto Ikuta.
This patch reduces lld link time of chromium's blink_core.dll in
component build.
Total size of input argument in .directives become nearly 300MB in the
build and calling many strchr and assert becomes bottleneck.
On my desktop machine, 4 times stats of the link time are like below.
Improved around 10%.
This patch
TotalSeconds : 13.4918885
TotalSeconds : 13.9474257
TotalSeconds : 13.4941082
TotalSeconds : 13.6077962
Avg : 13.63530465
master
TotalSeconds : 15.6938531
TotalSeconds : 15.7022508
TotalSeconds : 15.9567202
TotalSeconds : 14.5851505
Avg : 15.48449365
Differential Revision: https://reviews.llvm.org/D41590
llvm-svn: 321479
In https://reviews.llvm.org/rL321077 and https://reviews.llvm.org/D41231 I fixed a regression in the c-api which prevented the pruning from being *effectively* disabled.
However this approach, helpfully recommended by @labath, is cleaner.
It is also nice to remove the weasel words about effectively disabling from the api comments.
Differential Revision: https://reviews.llvm.org/D41497
llvm-svn: 321376
There is nothing useful that can be done with a read-only uninitialized
buffer without const_casting its contents to initialize it. A better
solution is to obtain a writable buffer
(WritableMemoryBuffer::getNewUninitMemBuffer), and then convert it to a
read-only buffer after initialization. All callers of this function have
already been updated to do this, so this function is now unused.
llvm-svn: 321257
Summary:
This fixes a crash when invalid -march options like `armv` are provided.
Based on a patch by Will Lovett.
Reviewers: rengolin, samparker, mcrosier
Reviewed By: samparker
Subscribers: aemerson, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D41429
llvm-svn: 321166
borked by: rL284966 (see: https://reviews.llvm.org/D25730).
Previously, Interval was unsigned (see: CachePruning.h), replacing the type with std::chrono::seconds (which is signed) causes a regression in behaviour because the c-api intends negative values to translate to large positive intervals to *effectively* disable the pruning (see comments on: setCachePruningInterval()).
Differential Revision: https://reviews.llvm.org/D41231
llvm-svn: 321077
Summary:
The motivation here is LLDB, where we need to fixup relocations in
mmapped files before their contents can be read correctly. The
MemoryBuffer class does exactly what we need, *except* that it maps the
file in read-only mode.
WritableMemoryBuffer reuses the existing machinery for opening and
mmapping a file. The only difference is in the argument to the
mapped_file_region constructor -- we create a private copy-on-write
mapping, so that we can make changes to the mapped data, but the changes
aren't carried over to the underlying file.
This patch is based on an initial version by Zachary Turner.
Reviewers: mehdi_amini, rnk, rafael, dblaikie, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40291
llvm-svn: 321071
The method IEEEFloat::convertFromStringSpecials() does not recognize
the "+Inf" and "-Inf" strings but these strings are printed for
the double Infinities by the IEEEFloat::toString().
This patch adds the "+Inf" and "-Inf" strings to the list of recognized
patterns in IEEEFloat::convertFromStringSpecials().
Re-landing after fix.
Reviewers: sberg, bogner, majnemer, timshen, rnk, skatkov, gottesmm, bkramer, scanon, anna
Reviewed By: anna
Subscribers: mkazantsev, FlameTop, llvm-commits, reames, apilipenko
Differential Revision: https://reviews.llvm.org/D38030
llvm-svn: 321054
LLVM IR function names which disable mangling start with '\01'
(https://www.llvm.org/docs/LangRef.html#identifiers).
When an identifier like "\01@abc@" gets dumped to MIR, it is quoted, but
only with single quotes.
http://www.yaml.org/spec/1.2/spec.html#id2770814:
"The allowed character range explicitly excludes the C0 control block
allowed), the surrogate block #xD800-#xDFFF, #xFFFE, and #xFFFF."
http://www.yaml.org/spec/1.2/spec.html#id2776092:
"All non-printable characters must be escaped.
[...]
Note that escape sequences are only interpreted in double-quoted scalars."
This patch adds support for printing escaped non-printable characters
between double quotes if needed.
Should also fix PR31743.
Differential Revision: https://reviews.llvm.org/D41290
llvm-svn: 320996
Most of the -Wsign-compare warnings are due to the fact that
enums are signed by default in the MS ABI, while the
tautological comparison warnings trigger on x86 builds where
sizeof(size_t) is 4 bytes, so N > numeric_limits<unsigned>::max()
is always false.
Differential Revision: https://reviews.llvm.org/D41256
llvm-svn: 320750
Without this when lld failed to replace the output file it would leave
the temporary behind. The problem is that the existing logic is
- cancel the delete flag
- rename
We have to cancel first to avoid renaming and then crashing and
deleting the old version. What is missing then is deleting the
temporary file if the rename fails.
This can be an issue on both unix and windows, but I am not sure how
to cause the rename to fail reliably on unix. I think it can be done
on ZFS since it has an ACL system similar to what windows uses, but
adding support for checking that in llvm-lit is probably not worth it.
llvm-svn: 319786
This recommits r319533 which was broken llvm-config --system-libs
output. The reason was that I used find_libraries for searching for the
z library. This returns absolute paths, and when these paths made it
into llvm-config, it made it produce nonsensical flags. To fix this, I
hand-roll a search for the library in the same way that we search for
the terminfo library a couple of lines below.
This is a bit less flexible than the find_library option, as it does not
allow the user to specify the path to the library at configure time
(which is important on windows, as zlib is unlikely to be found in any
of the standard places cmake searches), but I was able to guide the
build to find it with appropriate values of LIB and INCLUDE environment
variables.
Reviewers: compnerd, rnk, beanz, rafael
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D40779
llvm-svn: 319751
This is for PR35460.
Currently when LLD adds files to TarWriter it may pass the same file
multiple times. For example it happens for clang reproduce file which specifies
archive (.a) files more than once in command line.
Patch makes TarWriter to ignore files with the same path, so it will
add only the first one to archive.
Differential revision: https://reviews.llvm.org/D40606
llvm-svn: 319750
This reverts commit r319533 as it broke llvm-config --system-libs output
and everything that depends on it (which is mostly out of tree or
downstream folks, but includes a couple of llvm buildbots as well).
I think I have a fix for this in D40779, but I want someone to look
review it first. In the mean time, I am reverting this change, as it
seems to break a lot of people.
llvm-svn: 319663
Summary:
zlib support was hard-wired to off for (non-cygwin) windows targets.
This disables some features, such as reading debug info from compressed
dwarf sections.
This has been this way since zlib support was added in 2013 (r180083),
but there is no obvious reason for that. Zlib is perfectly capable of
being compiled for windows (it even has a cmake file that works out of
the box).
This enables one to turn on zlib support on windows, if one has zlib
avaliable.
Reviewers: rnk, beanz
Subscribers: mgorny, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D40655
llvm-svn: 319533
These command line options are not intended for public use, and often
don't even make sense in the context of a particular tool anyway. About
90% of them are already hidden, but when people add new options they
forget to hide them, so if you were to make a brand new tool today, link
against one of LLVM's libraries, and run tool -help you would get a
bunch of junk that doesn't make sense for the tool you're writing.
This patch hides these options. The real solution is to not have
libraries defining command line options, but that's a much larger effort
and not something I'm prepared to take on.
Differential Revision: https://reviews.llvm.org/D40674
llvm-svn: 319505
Certain ARM implementations treat icache clear instruction as a memory read,
and CPU segfaults on trying to clear cache on !PROT_READ page.
We workaround this in Memory::protectMappedMemory by adding
PROT_READ to affected pages, clearing the cache, and then setting
desired protection.
This fixes "AllocationTests/MappedMemoryTest.***/3" unit-tests on
affected hardware.
Reviewers: psmith, zatrazz, kristof.beyls, lhames
Reviewed By: lhames
Subscribers: llvm-commits, krytarowski, peter.smith, jgreenhalgh, aemerson,
rengolin
Patch by maxim-kuvrykov!
Differential Revision: https://reviews.llvm.org/D40423
llvm-svn: 319166
The existing library assumed that a stream's length would never
change. This makes some things simpler, but it's not flexible
enough for what we need, especially for writable streams where
what you really want is for each call to write to actually append.
llvm-svn: 319070
Shadow stack solution introduces a new stack for return addresses only.
The HW has a Shadow Stack Pointer (SSP) that points to the next return address.
If we return to a different address, an exception is triggered.
The shadow stack is managed using a series of intrinsics that are introduced in this patch as well as the new register (SSP).
The intrinsics are mapped to new instruction set that implements CET mechanism.
The patch also includes initial infrastructure support for IBT.
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40223
Change-Id: I4daa1f27e88176be79a4ac3b4cd26a459e88fed4
llvm-svn: 318996
The previous commit had the condition in the do/while backwards.
Debug builds currently print out low level details of the Knuth division algorithm when -debug is used. This information isn't useful in most cases and just adds noise to the log.
This adds a new preprocessor flag to enable the prints in the knuth division code in APInt.
Differential Revision: https://reviews.llvm.org/D40404
llvm-svn: 318966
Debug builds currently print out low level details of the Knuth division algorithm when -debug is used. This information isn't useful in most cases and just adds noise to the log.
This adds a new preprocessor flag to enable the prints in the knuth division code in APInt.
Differential Revision: https://reviews.llvm.org/D40404
llvm-svn: 318963
We already allowed keep+discard. It is important to be able to discard
a temporary if a rename fail. It is also convenient as it allows the
use of RAII for discarding.
Allow discarding twice for similar reasons.
llvm-svn: 318867
The default limit is 1000000 but it can be configured with a cache
policy. The motivation is that some filesystems (notably ext4) have
a limit on the number of files that can be contained in a directory
(separate from the inode limit).
Differential Revision: https://reviews.llvm.org/D40327
llvm-svn: 318857
Zachary Turner