This enables readobj to output Windows resource files (.res). This way,
we'll be able to test .res outputs without comparing them byte-by-byte
with "magic binary files" generated by MS toolchain.
Differential Revision: https://reviews.llvm.org/D38058
llvm-svn: 313790
Add adds support for naming data segments. This is useful
useful linkers so that they can merge similar sections.
Differential Revision: https://reviews.llvm.org/D37886
llvm-svn: 313692
readelf tool reports an error when output contains the same section
in multiple COMDAT groups. That can be useful.
Path teaches llvm-readobj to do the same.
Differential revision: https://reviews.llvm.org/D37567
llvm-svn: 313459
With fix in formatting for GNU style output.
Original commit message:
This refactors GNUStyle<ELFT>::printGroupSections and
LLVMStyle<ELFT>::printGroupSections to split out all
duplicated code.
After the change these methods just prints the data provided
by introduced getGroups in a corresponding LLVM/GNU format.
Differential revision: https://reviews.llvm.org/D37621
llvm-svn: 313236
This refactors GNUStyle<ELFT>::printGroupSections and
LLVMStyle<ELFT>::printGroupSections to split out all
duplicated code.
After the change these methods just prints the data provided
by introduced getGroups in a corresponding LLVM/GNU format.
Differential revision: https://reviews.llvm.org/D37621
llvm-svn: 313234
Install an llvm-readelf symlink to llvm-readobj.
When invoked as *readelf*, default to -elf-output-style=GNU.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D33869
llvm-svn: 308408
Accept and ignore --wide/-W. In GNU readelf this switch is
necessary to get the output format that's consistent between
32-bit and 64-bit targets. llvm-readobj always produces that
output format.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D33873
llvm-svn: 308396
In GNU readelf, the short option for --sections is upper-case -S.
Note that GNU uses lower-case -s to mean --symbols, while LLVM
uses -s to mean --sections and -t to mean --symbols (-t has yet a
different meaning in GNU). So command-line uses with -S can now
be compatible, but uses with -s or -t are still incompatible.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D33872
llvm-svn: 308392
Summary:
Instead of wiring these through the CVTypeVisitor interface, clients
should inspect the CVTypeArray before visiting it and potentially load
up the type server's TPI stream if they need it.
No tests relied on this functionality because LLD was the only client.
Reviewers: ruiu
Subscribers: mgorny, hiraditya, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D35394
llvm-svn: 308212
Nothing special here, output format is similar to the format
used by binutils readelf and ELF Tool Chain readelf.
Differential revision: https://reviews.llvm.org/D35351
llvm-svn: 308033
We would return an error in getVaPtr if the RVA table being dumped was
the last data in the .rdata section. Avoid the issue by subtracting one
from the offset and adding it back to get an open interval again.
llvm-svn: 306171
This includes the safe SEH tables and the control flow guard function
table. LLD will emit the guard table soon, and I need a tool that dumps
them for testing.
llvm-svn: 305979
Merge the functionality into the random access type collection.
This class was only being used in 2 places, so getting rid of it
simplifies the code.
llvm-svn: 305653
Summary: Added test cases for multiple machine types, file merging, multiple languages, and more resource types. Also fixed new bugs these tests exposed.
Subscribers: javed.absar, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34047
llvm-svn: 305258
I accidentally combined this patch with one for adding more tests, they
should be separated.
This reverts commit 3da218a523be78df32e637d3446ecf97c9ea0465.
llvm-svn: 305257
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
Object files have symbol records not aligned to any particular
boundary (e.g. 1-byte aligned), while PDB files have symbol
records padded to 4-byte aligned boundaries. Since they share
the same reading / writing code, we have to provide an option to
specify the alignment and propagate it up to the producer or
consumer who knows what the alignment is supposed to be for the
given container type.
Added a test for this by modifying the existing PDB -> YAML -> PDB
round-tripping code to round trip symbol records as well as types.
Differential Revision: https://reviews.llvm.org/D33785
llvm-svn: 304484
This adds implementations for Symbols and FrameData, and renames
the existing codeview::StringTable class to conform to the
DebugSectionStringTable convention.
llvm-svn: 304222
Previous algotirhm assumed that types and ids are in a single
unified stream. For inputs that come from object files, this
is the case. But if the input is already a PDB, or is the result
of a previous merge, then the types and ids will already have
been split up, in which case we need an algorithm that can
accept operate on independent streams of types and ids that
refer across stream boundaries to each other.
Differential Revision: https://reviews.llvm.org/D33417
llvm-svn: 303577
This was originally reverted because it was a breaking a bunch
of bots and the breakage was not surfacing on Windows. After much
head-scratching this was ultimately traced back to a bug in the
lit test runner related to its pipe handling. Now that the bug
in lit is fixed, Windows correctly reports these test failures,
and as such I have finally (hopefully) fixed all of them in this
patch.
llvm-svn: 303446
This is a squash of ~5 reverts of, well, pretty much everything
I did today. Something is seriously broken with lit on Windows
right now, and as a result assertions that fire in tests are
triggering failures. I've been breaking non-Windows bots all
day which has seriously confused me because all my tests have
been passing, and after running lit with -a to view the output
even on successful runs, I find out that the tool is crashing
and yet lit is still reporting it as a success!
At this point I don't even know where to start, so rather than
leave the tree broken for who knows how long, I will get this
back to green, and then once lit is fixed on Windows, hopefully
hopefully fix the remaining set of problems for real.
llvm-svn: 303409
Right now we have multiple notions of things that represent collections of
types. Most commonly used are TypeDatabase, which is supposed to keep
mappings from TypeIndex to type name when reading a type stream, which
happens when reading PDBs. And also TypeTableBuilder, which is used to
build up a collection of types dynamically which we will later serialize
(i.e. when writing PDBs).
But often you just want to do some operation on a collection of types, and
you may want to do the same operation on any kind of collection. For
example, you might want to merge two TypeTableBuilders or you might want
to merge two type streams that you loaded from various files.
This dichotomy between reading and writing is responsible for a lot of the
existing code duplication and overlapping responsibilities in the existing
CodeView library classes. For example, after building up a
TypeTableBuilder with a bunch of type records, if we want to dump it we
have to re-invent a bunch of extra glue because our dumper takes a
TypeDatabase or a CVTypeArray, which are both incompatible with
TypeTableBuilder.
This patch introduces an abstract base class called TypeCollection which
is shared between the various type collection like things. Wherever we
previously stored a TypeDatabase& in some common class, we now store a
TypeCollection&.
The advantage of this is that all the details of how the collection are
implemented, such as lazy deserialization of partial type streams, is
completely transparent and you can just treat any collection of types the
same regardless of where it came from.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303388
Often you have an array and you just want to use it. With the current
design, you have to first construct a `BinaryByteStream`, and then create
a `BinaryStreamRef` from it. Worse, the `BinaryStreamRef` holds a pointer
to the `BinaryByteStream`, so you can't just create a temporary one to
appease the compiler, you have to actually hold onto both the `ArrayRef`
as well as the `BinaryByteStream` *AND* the `BinaryStreamReader` on top of
that. This makes for very cumbersome code, often requiring one to store a
`BinaryByteStream` in a class just to circumvent this.
At the cost of some added complexity (not exposed to users, but internal
to the library), we can do better than this. This patch allows us to
construct `BinaryStreamReaders` and `BinaryStreamWriters` directly from
source data (e.g. `StringRef`, `MutableArrayRef<uint8_t>`, etc). Not only
does this reduce the amount of code you have to type and make it more
obvious how to use it, but it solves real lifetime issues when it's
inconvenient to hold onto a `BinaryByteStream` for a long time.
The additional complexity is in the form of an added layer of indirection.
Whereas before we simply stored a `BinaryStream*` in the ref, we now store
both a `BinaryStream*` **and** a `std::shared_ptr<BinaryStream>`. When
the user wants to construct a `BinaryStreamRef` directly from an
`ArrayRef` etc, we allocate an internal object that holds ownership over a
`BinaryByteStream` and forwards all calls, and store this in the
`shared_ptr<>`. This also maintains the ref semantics, as you can copy it
by value and references refer to the same underlying stream -- the one
being held in the object stored in the `shared_ptr`.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303294
The previous code was discarding the error message from
createBinary() by calling errorToErrorCode().
This meant that such error were always reported unhelpfully
as "Invalid data was encountered while parsing the file".
Other tools such as llvm-objdump already produce a more
the error message in this case.
Differential Revision: https://reviews.llvm.org/D32985
llvm-svn: 302664
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302399
Summary:
This reverts commit 56beec1b1cfc6d263e5eddb7efff06117c0724d2.
Revert "Quick fix to D32609, it seems .o files are not transferred in all cases."
This reverts commit 7652eecd29cfdeeab7f76f687586607a99ff4e36.
Revert "Update llvm-readobj -coff-resources to display tree structure."
This reverts commit 422b62c4d302cfc92401418c2acd165056081ed7.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32958
llvm-svn: 302397
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302386
Most of the time we know exactly how many type records we
have in a list, and we want to use the visitor to deserialize
them into actual records in a database. Previously we were
just using push_back() every time without reserving the space
up front in the vector. This is obviously terrible from a
performance standpoint, and it's not uncommon to have PDB
files with half a million type records, where the performance
degredation was quite noticeable.
llvm-svn: 302302
llvm-readobj hand rolls some CodeView parsing code for string
tables, so this patch updates it to re-use some of the newly
introduced parsing code in LLVMDebugInfoCodeView.
Differential Revision: https://reviews.llvm.org/D32772
llvm-svn: 302052
Previously we wrote line information and file checksum
information, but we did not write information about inlinee
lines and functions. This patch adds support for that.
llvm-svn: 301936
This is motivated by https://reviews.llvm.org/D32488 where I am trying
to add printing of the section type for incompatible sections to LLD
error messages. This patch allows us to use the same code in
llvm-readobj and LLD instead of duplicating the function inside LLD.
Patch by Alexander Richardson!
llvm-svn: 301921
In preparation for introducing writing capabilities for each of
these classes, I would like to adopt a Foo / FooRef naming
convention, where Foo indicates that the class can manipulate and
serialize Foos, and FooRef indicates that it is an immutable view of
an existing Foo. In other words, Foo is a writer and FooRef is a
reader. This patch names some existing readers to conform to the
FooRef convention, while offering no functional change.
llvm-svn: 301810
There is a lot of duplicate code for printing line info between
YAML and the raw output printer. This introduces a base class
that can be shared between the two, and makes some minor
cleanups in the process.
llvm-svn: 301728
The llvm-readobj parsing code currently exists in our CodeView
library, so we use that to parse instead of re-writing the logic
in the tool.
llvm-svn: 301718
This patch dumps the raw bytes of the .rsrc sections that
are present in COFF object and executable files. Subsequent
patches will parse this information and dump in a more human
readable format.
Differential Revision: https://reviews.llvm.org/D32463
Patch By: Eric Beckmann
llvm-svn: 301578
Previously parsing of these were all grouped together into a
single master class that could parse any type of debug info
fragment.
With writing forthcoming, the complexity of each individual
fragment is enough to warrant them having their own classes so
that reading and writing of each fragment type can be grouped
together, but isolated from the code for reading and writing
other fragment types.
In doing so, I found a place where parsing code was duplicated
for the FileChecksums fragment, across llvm-readobj and the
CodeView library, and one of the implementations had a bug.
Now that the codepaths are merged, the bug is resolved.
Differential Revision: https://reviews.llvm.org/D32547
llvm-svn: 301557
We have a lot of very similarly named classes related to
dealing with module debug info. This patch has NFC, it just
renames some classes to be more descriptive (albeit slightly
more to type). The mapping from old to new class names is as
follows:
Old | New
ModInfo | DbiModuleDescriptor
ModuleSubstream | ModuleDebugFragment
ModStream | ModuleDebugStream
With the corresponding Builder classes renamed accordingly.
Differential Revision: https://reviews.llvm.org/D32506
llvm-svn: 301555
Now that the libObect support for wasm is better we can
have readobj and nm produce more useful output too.
Differential Revision: https://reviews.llvm.org/D31514
llvm-svn: 300365
Note payloads are padded to a multiple of 4 bytes in size, but the size
of the string that should be print can be smaller e.g. the n_descsz
field in gold's version note is 9, so that's the whole size of the
string that should be printed. The padding is part of the format of a
SHT_NOTE section or PT_NOTE segment, but it's not part of the note
itself.
Printing the extra null bytes may confuse some tools, e.g. when the
llvm-readobj is sent to grep, it treats the output as binary because
it contains a null byte.
Differential Revision: https://reviews.llvm.org/D30804
llvm-svn: 299576
Summary:
MASM can produce type streams that are not topologically sorted. It can
even produce type streams with circular references, but those are not
common in practice.
Reviewers: inglorion, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31629
llvm-svn: 299403
Mostly this change adds support converting to and from
YAML which will allow us to write more test cases for
the WebAssembly MC and lld ports.
Better support for objdump, readelf, and nm will be in
followup CLs.
I had to update the two wasm test binaries because they
used the old style 'name' section which is no longer
supported.
Differential Revision: https://reviews.llvm.org/D31099
Patch by Sam Clegg
llvm-svn: 299101
We're seeing binutils ld produce binaries where the import address
table's NameRVA entry is actually a VA instead (i.e. it's already base
relocated), which llvm-readobj then chokes on. Both dumpbin and the
Windows loader are able to handle these binaries correctly, however, and
we can make llvm-readobj handle them correctly too by iterating the
import lookup table (which doesn't have a relocated NameRVA) rather than
the import address table.
The import lookup table and the import address table are supposed to be
identical on disk, and prior to r277298 the import lookup table would be
used by `llvm-readobj -coff-imports` anyway, so this shouldn't have any
functional change (except in the case of our malformed binaries). The
import lookup table can apparently be missing when using old Borland
linkers, so fall back to the import address table in that case.
Resolves PR31766.
Differential Revision: https://reviews.llvm.org/D31362
llvm-svn: 298812
Summary: MSVC does this when producing a PDB.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31316
llvm-svn: 298717
- Rename runtime metadata -> code object metadata
- Make metadata not flow
- Switch enums to use ScalarEnumerationTraits
- Cleanup and move AMDGPUCodeObjectMetadata.h to AMDGPU/MCTargetDesc
- Introduce in-memory representation for attributes
- Code object metadata streamer
- Create metadata for isa and printf during EmitStartOfAsmFile
- Create metadata for kernel during EmitFunctionBodyStart
- Finalize and emit metadata to .note during EmitEndOfAsmFile
- Other minor improvements/bug fixes
Differential Revision: https://reviews.llvm.org/D29948
llvm-svn: 298552
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
Before the endianness was specified on each call to read
or write of the StreamReader / StreamWriter, but in practice
it's extremely rare for streams to have data encoded in
multiple different endiannesses, so we should optimize for the
99% use case.
This makes the code cleaner and more general, but otherwise
has NFC.
llvm-svn: 296415
This was reverted because it was breaking some builds, and
because of incorrect error code usage. Since the CL was
large and contained many different things, I'm resubmitting
it in pieces.
This portion is NFC, and consists of:
1) Renaming classes to follow a consistent naming convention.
2) Fixing the const-ness of the interface methods.
3) Adding detailed doxygen comments.
4) Fixing a few instances of passing `const BinaryStream& X`. These
are now passed as `BinaryStreamRef X`.
llvm-svn: 296394
r296215, "[PDB] General improvements to Stream library."
r296217, "Disable BinaryStreamTest.StreamReaderObject temporarily."
r296220, "Re-enable BinaryStreamTest.StreamReaderObject."
r296244, "[PDB] Disable some tests that are breaking bots."
r296249, "Add static_cast to silence -Wc++11-narrowing."
std::errc::no_buffer_space should be used for OS-oriented errors for socket transmission.
(Seek discussions around llvm/xray.)
I could substitute s/no_buffer_space/others/g, but I revert whole them ATM.
Could we define and use LLVM errors there?
llvm-svn: 296258
This adds various new functionality and cleanup surrounding the
use of the Stream library. Major changes include:
* Renaming of all classes for more consistency / meaningfulness
* Addition of some new methods for reading multiple values at once.
* Full suite of unit tests for reader / writer functionality.
* Full set of doxygen comments for all classes.
* Streams now store their own endianness.
* Fixed some bugs in a few of the classes that were discovered
by the unit tests.
llvm-svn: 296215
This is part of a larger effort to get the Stream code moved
up to Support. I don't want to do it in one large patch, in
part because the changes are so big that it will treat everything
as file deletions and add, losing history in the process.
Aside from that though, it's just a good idea in general to
make small changes.
So this change only changes the names of the Stream related
source files, and applies necessary source fix ups.
llvm-svn: 296211
Some PDBs or object files can contain references to other PDBs
where the real type information lives. When this happens,
all type indices in the original PDB are meaningless because
their records are not there.
With this patch we add the ability to pull type info from those
secondary PDBs.
Differential Revision: https://reviews.llvm.org/D29973
llvm-svn: 295382
Create a WasmDumper subclass of ObjDumper to support Webassembly binary
files.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D27355
llvm-svn: 293569
Summary:
Add a new load command LC_BUILD_VERSION. It is a generic version of
LC_*_VERSION_MIN load_command used on Apple platforms. Instead of having
a seperate load command for each platform, LC_BUILD_VERSION is recording
platform info as an enum. It also records SDK version, min_os, and tools
that used to build the binary.
rdar://problem/29781291
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29044
llvm-svn: 292824
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
llvm-svn: 292366
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
llvm-svn: 291911
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
llvm-svn: 291898
Previously the type dumper itself was passed around to a lot of different
places and manipulated in ways that were more appropriate on the type
database. For example, the entire TypeDumper was passed into the symbol
dumper, when all the symbol dumper wanted to do was lookup the name of a
TypeIndex so it could print it. That's what the TypeDatabase is for --
mapping type indices to names.
Another example is how if the user runs llvm-pdbdump with the option to
dump symbols but not types, we still have to visit all types so that we
can print minimal information about the type of a symbol, but just without
dumping full symbol records. The way we did this before is by hacking it
up so that we run everything through the type dumper with a null printer,
so that the output goes to /dev/null. But really, we don't need to dump
anything, all we want to do is build the type database. Since
TypeDatabaseVisitor now exists independently of TypeDumper, we can do
this. We just build a custom visitor callback pipeline that includes a
database visitor but not a dumper.
All the hackery around printers etc goes away. After this patch, we could
probably even delete the entire CVTypeDumper class since really all it is
at this point is a thin wrapper that hides the details of how to build a
useful visitation pipeline. It's not a priority though, so CVTypeDumper
remains for now.
After this patch we will be able to easily plug in a different style of
type dumper by only implementing the proper visitation methods to dump
one-line output and then sticking it on the pipeline.
Differential Revision: https://reviews.llvm.org/D28524
llvm-svn: 291724
We were starting to get some name clashes between llvm-pdbdump
and the common CodeView framework, so I took this opportunity
to rename a bunch of files to more accurately describe their
usage. This also helps in llvm-pdbdump to distinguish
between different files and whether they are used for pretty
dump mode or raw dump mode.
llvm-svn: 291627
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
llvm-svn: 289784
These are OpenBSD specific program headers.
OpenBSD commit:
d39116912b
It is required for fixing PR31288.
Differential revision: https://reviews.llvm.org/D27456
llvm-svn: 288831
-symbols prints both .symtab and .dynsym symbols for GNU style in ELF.
-dyn-symbols prints symbols looking up through hash tables. This helps validate hash tables.
llvm-svn: 287786
This has two advantages:
1) We slowly move away from ErrorOr to the new handling interface,
in the hope of having an uniform error handling in LLVM, eventually.
2) We're starting to have *meaningful* error messages for invalid
object ELF files, rather than a generic "parse error". At some point
we should include also the offset to improve the quality of the
diagnostic.
llvm-svn: 287081
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
Marek Sokolowski