This introduces a new family of combiner helper routines that re-use the
target specific cost model from SelectionDAG, and generate inline implementations
of the memcpy family of intrinsics.
The combines are only enabled at optimization levels higher than -O0, and give
very substantial performance improvements.
Differential Revision: https://reviews.llvm.org/D65167
llvm-svn: 366951
Summary:
I messed up the logic for this. Fixing with some improvements suggested
by Pavel.
Reviewers: labath, jdoerfert
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D65165
llvm-svn: 366950
Summary:
We want the tool conventions to state that `__tls_align` will be a power of 2.
It makes sense to not have an exception for when there is no TLS.
Reviewers: tlively, sunfish
Reviewed By: tlively
Subscribers: dschuff, sbc100, jgravelle-google, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65177
llvm-svn: 366948
We can treat icmp eq X, MIN_UINT as icmp ule X, MIN_UINT and allow
it to merge with icmp ugt X, C. Similar for the other constants.
We can do simliar for icmp ne X, (U)INT_MIN/MAX in foldAndOfICmps. And we already handled UINT_MIN there.
Fixes PR42691.
Differential Revision: https://reviews.llvm.org/D65017
llvm-svn: 366945
Summary:
This could previously happen if errors that are emitted after reaching the
error limit. In that case, the flag inside the newline() function will be
set to true which causes the next call to print a newline even though the
actual message will be discarded.
Reviewers: ruiu, grimar, MaskRay, espindola
Reviewed By: ruiu
Subscribers: emaste, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65198
llvm-svn: 366944
r366317 added a legalization for s128 G_ICMP narrow scalar which tried to hard
code the result type of the new legalized G_SELECT. Change this to instead use
type of the original G_ICMP result and allow the target to legalize it if necessary
later.
llvm-svn: 366943
In Perl, -z is defined as checking if a "file has zero size" and makes no mention what it does when given a directory. It looks like the behavior differs across platforms, which is why on Windows the SARIF file was always being deleted.
Patch by Joe Ranieri.
llvm-svn: 366941
To support prefetch mode 3 we need to pad current
cacheline and fill 3 cachelines after. Current padding
is only sufficient for mode 2.
Differential Revision: https://reviews.llvm.org/D65236
llvm-svn: 366938
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
This removes the VCEQ/VCNE/VCGE/VCEQZ/etc nodes, just using two called VCMP and
VCMPZ with an extra operand as the condition code. I believe this will make
some combines simpler, allowing us to just look at these codes and not the
operands. It also helps fill in a missing VCGTUZ MVE selection without adding
extra nodes for it.
Differential Revision: https://reviews.llvm.org/D65072
llvm-svn: 366934
This patch adds support for recognizing cases where a larger vector type is being used to reduce just the elements in the lower subvector:
e.g. <8 x i32> reduction pattern in a <16 x i32> vector:
<4,5,6,7,u,u,u,u,u,u,u,u,u,u,u,u>
<2,3,u,u,u,u,u,u,u,u,u,u,u,u,u,u>
<1,u,u,u,u,u,u,u,u,u,u,u,u,u,u,u>
matchBinOpReduction returns the lower extracted subvector in such cases, assuming isExtractSubvectorCheap accepts the extraction.
I've only enabled it for X86 reduction sums so far. I intend to enable it for the bitop/minmax cases in future patches, and eventually I think its worth turning it on all the time. This is mainly just a case of ensuring calls to matchBinOpReduction don't make assumptions on the vector width based on the original vector extraction.
Fixes the x86 partial reduction sum cases in PR33758 and PR42023.
Differential Revision: https://reviews.llvm.org/D65047
llvm-svn: 366933
The prevents us from trying to convert an i1 predicate vector to a float, or
vice-versa. Better patterns are possible, which will follow in a subsequent
commit. For now we just expand them.
Differential Revision: https://reviews.llvm.org/D65066
llvm-svn: 366931
Fix an off-by-one error which made us not look at the last element of the
zero vector. This caused a miscompile in 188.ammp.
Differential Revision: https://reviews.llvm.org/D65168
llvm-svn: 366930
MVE VCMP instructions can use a general purpose register as the second operand.
This adds the combines for it, selecting from a compare of a vdup.
Differential Revision: https://reviews.llvm.org/D65061
llvm-svn: 366924
NB: the warning is about the input file itself regardless of the options used
such as `-r`, `-s` etc..
https://bugs.llvm.org/show_bug.cgi?id=41911
Reviewers: jhenderson, grimar, MaskRay, rupprecht
Reviewed by: MaskRay, jhenderson
Differential Revision: https://reviews.llvm.org/D64779
llvm-svn: 366923
If we are already using the same chain for the old/new memory ops then just return.
Fixes PR42727 which had getLoad() reusing an existing node.
llvm-svn: 366922
This adds a DeMorgan combine for OR's of compares to turn them into AND's,
helping prevent them from going into and out of gpr registers. It also fills in
the VCLE and VCLT nodes that MVE can select, allowing it to invert more
compares.
Differential Revision: https://reviews.llvm.org/D65059
llvm-svn: 366920
Summary:
This introduces a bunch of small optimizations with the purpose of
making the fastpath tighter:
- tag more conditions as `LIKELY`/`UNLIKELY`: as a rule of thumb we
consider that every operation related to the secondary is unlikely
- attempt to reduce the number of potentially extraneous instructions
- reorganize the `Chunk` header to not straddle a word boundary and
use more appropriate types
Note that some `LIKELY`/`UNLIKELY` impact might be less obvious as
they are in slow paths (for example in `secondary.cc`), but at this
point I am throwing a pretty wide net, and it's consistant and doesn't
hurt.
This was mosly done for the benfit of Android, but other platforms
benefit from it too. An aarch64 Android benchmark gives:
- before:
```
BM_youtube/min_time:15.000/repeats:4/manual_time_mean 445244 us 659385 us 4
BM_youtube/min_time:15.000/repeats:4/manual_time_median 445007 us 658970 us 4
BM_youtube/min_time:15.000/repeats:4/manual_time_stddev 885 us 1332 us 4
```
- after:
```
BM_youtube/min_time:15.000/repeats:4/manual_time_mean 415697 us 621925 us 4
BM_youtube/min_time:15.000/repeats:4/manual_time_median 415913 us 622061 us 4
BM_youtube/min_time:15.000/repeats:4/manual_time_stddev 990 us 1163 us 4
```
Additional since `-Werror=conversion` is enabled on some platforms we
are built on, enable it upstream to catch things early: a few sign
conversions had slept through and needed additional casting.
Reviewers: hctim, morehouse, eugenis, vitalybuka
Reviewed By: vitalybuka
Subscribers: srhines, mgorny, javed.absar, kristof.beyls, delcypher, #sanitizers, llvm-commits
Tags: #llvm, #sanitizers
Differential Revision: https://reviews.llvm.org/D64664
llvm-svn: 366918
Summary:
On AIX psutil can run into problems with permissions to read the process
tree, which causes problems for python timeout tests which need to kill off
a test and it's children.
This patch adds a workaround by invoking shell via subprocess and using a
platform specific option to ps to list all the descendant processes so we can
kill them. We add some checks so lit can tell whether timeout tests are
supported with out exposing whether we are utilizing the psutil
implementation or the alternative.
Reviewers: hubert.reinterpretcast, andusy, davide, delcypher
Reviewed By: delcypher
Subscribers: davide, delcypher, christof, lldb-commits, libcxx-commits, llvm-commits
Tags: #lldb, #libc, #llvm
Differential Revision: https://reviews.llvm.org/D64251
llvm-svn: 366912
Summary:
Move `-ftime-trace-granularity` option to frontend options. Without patch
this option is showed up in the help for any tool that links libSupport.
Reviewers: sammccall
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65202
llvm-svn: 366911
Add a number of folds to convert and(vcmp, vcmp) into a single VPT block, where
the second vcmp becomes predicated on the first.
The VCMP; VPST; VCMP will eventually be converted to VPT; VCMP in the
VPTBlockPass.
Differential Revision: https://reviews.llvm.org/D65058
llvm-svn: 366910
Much like integers, this adds MVE floating point compares and select. It
requires a lot more buildvector/shuffle code because we may need to expand the
compares without mve.fp, and requires support for and/or because of the way we
lower llvm condition codes.
Some original code by David Sherwood
Differential Revision: https://reviews.llvm.org/D65054
llvm-svn: 366909
This adds some basic, "worst case" handling for MVE predicate Or/And/Xor. It
does this by going into and out of GPRs, doing the operation on scalars.
Code by David Sherwood.
Differential Revision: https://reviews.llvm.org/D65053
llvm-svn: 366907
This change make sure that llvm does not emit an invalid IT block
by putting the constant pool in the middle of an IT block.
We have code to try to avoid putting a constant island in the middle of an
IT block, but it only works if we see an IT between the one currently
referencing CPE and possible insertion point. If the first instruction
we look at is the VLDRD after the IT , we never see the IT and does not
realize that the instruction doing the load could be in an IT block itself.
Differential Revision: https://reviews.llvm.org/D64621
Change-Id: I24cecb37cded75e8992870bd997f6226853bd920
llvm-svn: 366905
Summary:
SimplifyFPBinOp is a variant of SimplifyBinOp that lets you specify
fast math flags, but the name is misleading because both functions
can simplify both FP and non-FP ops. Instead, overload SimplifyBinOp
so that you can optionally specify fast math flags.
Likewise for SimplifyFPUnOp.
Reviewers: spatel
Reviewed By: spatel
Subscribers: xbolva00, cameron.mcinally, eraman, hiraditya, haicheng, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64902
llvm-svn: 366902
Amara Emerson