See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
I replaced all uses of LLVM_ON_WIN32 with _WIN32 in r331127 (llvm),
r331069 (clang), r329697 (lldb), r329696 (lld), r329696 (clang-tools-extra).
If your out-of-tree program used LLVM_ON_WIN32, just use _WIN32 instead, which
is set at exactly the same time to exactly the same value.
https://reviews.llvm.org/D46264
llvm-svn: 331224
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
This moves over all uses of the macro, but doesn't remove the definition
of it in (llvm-)config.h yet.
llvm-svn: 331127
When debugging test failures with -vv (or -v in the case of the
internal shell), this makes it easier to locate the RUN line that
failed. For example, clang's test/Driver/linux-ld.c has 892 total RUN
lines, and clang's test/Driver/arm-cortex-cpus.c has 424 RUN lines
after concatenation for line continuations.
When reading the generated shell script, this also makes it easier to
locate the RUN line that produced each command.
To support reporting RUN line numbers in the case of the internal
shell, this patch extends the internal shell to support the null
command, ":", except pipelines are not supported.
Reviewed By: asmith, delcypher
Differential Revision: https://reviews.llvm.org/D44598
llvm-svn: 330755
It used to symlink dsymutil to llvm-dsymutil, but after r327790 llvm's dsymutil
binary is now called dsymutil without prefix.
r327792 then reversed the direction of the symlink if
LLVM_INSTALL_CCTOOLS_SYMLINKS was set, but that looks like a buildfix and not
like something anyone should need.
https://reviews.llvm.org/D45966
llvm-svn: 330727
Summary:
This patch removes references to AliasAnalysisCounter pass from the AliasAnalysis documentation. That pass have been eliminated in 2015, at revision trunk@247167.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D45876
llvm-svn: 330590
Summary:
In the course of writing an experimental ANTLR grammar based on this
document, I found three errors in the documented BNF:
SimpleValues of dag type are allowed to have no operands at all after
the initial DagArg specifying the operator. For example, the value
(outs) is extremely common in backends; an example in the test suite
is test/TableGen/AsmVariant.td line 30. But the BNF doesn't allow
DagArgList to expand to the empty string (it must contain at least one
DagArg), and therefore the DagArgList specifying the operands in the
dag-shaped production for SimpleValue should be optional.
In the production for BodyItem with a 'let' and an optional RangeList,
the RangeList should have braces around it if it's present, matching
code such as "let E{7-0} = ..." on test/TableGen/BitsInit.td line 42.
Those braces aren't included in the RangeList nonterminal itself, so
instead they need to be part of the optional segment of the BodyItem
production.
Finally, the identifier after 'defm' should be optional. Again, this
is very common in the real back end .td files; an example in the test
suite is in test/TableGen/defmclass.td line 49.
Reviewers: rengolin, nhaehnle, stoklund
Reviewed By: nhaehnle
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45818
llvm-svn: 330570
Should be a harmless trimming of trailing whitespace from a
documentation file.
(There are other instances of trailing whitespace in this file alone.
I've only fixed one of them, on the basis that that way the rest are
still available for other people's commit-access tests :-)
llvm-svn: 330567
This was originally committed at rL328921 and reverted at rL329920 to
investigate failures in Chrome. This time I've added to the ReleaseNotes
to warn users of the potential of exposing UB and let me repeat that
here for more exposure:
Optimization of floating-point casts is improved. This may cause surprising
results for code that is relying on undefined behavior. Code sanitizers can
be used to detect affected patterns such as this:
int main() {
float x = 4294967296.0f;
x = (float)((int)x);
printf("junk in the ftrunc: %f\n", x);
return 0;
}
$ clang -O1 ftrunc.c -fsanitize=undefined ; ./a.out
ftrunc.c:5:15: runtime error: 4.29497e+09 is outside the range of
representable values of type 'int'
junk in the ftrunc: 0.000000
Original commit message:
fptosi / fptoui round towards zero, and that's the same behavior as ISD::FTRUNC,
so replace a pair of casts with the equivalent node. We don't have to account for
special cases (NaN, INF) because out-of-range casts are undefined.
Differential Revision: https://reviews.llvm.org/D44909
llvm-svn: 330437
This is copied from Andrea's text in PR36875:
https://bugs.llvm.org/show_bug.cgi?id=36875
As noted there, this is a hack...but it's a good one!
It's important to show potential workflows up-front
with examples, so customers can copy and experiment
with them.
llvm-svn: 329726
This patch moves the logic that collects and analyzes dispatch events to the
DispatchStatistics view.
Added flag -dispatch-stats to print statistics related to the dispatch logic.
llvm-svn: 329708
This patch teaches llvm-mca how to parse code comments in search for special
"markers" used to select regions of code.
Example:
# LLVM-MCA-BEGIN My Code Region
....
# LLVM-MCA-END
The MCAsmLexer now delegates to an object of class MCACommentParser (i.e. an
AsmCommentConsumer) the parsing of code comments to search for begin/end code
region markers.
A comment starting with substring "LLVM-MCA-BEGIN" marks the beginning of a new
region of code. A comment starting with substring "LLVM-MCA-END" marks the end
of the last region.
This implementation doesn't allow regions to overlap. Each region can have a
optional description; internally, each region is identified by a range of source
code locations (SMLoc).
MCInst objects are added to a region R only if the source location for the
MCInst is in the range of locations specified by R.
By default, the tool allocates an implicit "Default" code region which contains
every source location. See new tests llvm-mca-marker-*.s for a few examples.
A new Backend object is created for every region. So, the analysis is conducted
on every parsed code region. The final report is the union of the reports
generated for every code region. Note that empty regions are skipped.
Special "[#] Code Region - ..." strings are used in the report to mark the
portion which is specific to a code region only. For example, see
llvm-mca-markers-5.s.
Differential Revision: https://reviews.llvm.org/D45433
llvm-svn: 329590
Summary:
The option is helpful for large projects where it's not feasible to specify sources which
user would like to see in the report. Instead, it allows to black-list specific sources via
regular expressions (e.g. now it's possible to skip all files that have "test" in its name).
This also partially fixes https://bugs.llvm.org/show_bug.cgi?id=34277
Reviewers: vsk, morehouse, liaoyuke
Reviewed By: vsk
Subscribers: kcc, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D43907
llvm-svn: 329581
Summary:
This change consolidates the always/never lists that may be provided to
clang to externally control which functions should be XRay instrumented
by imbuing attributes. The files follow the same format as defined in
https://clang.llvm.org/docs/SanitizerSpecialCaseList.html for the
sanitizer blacklist.
We also deprecate the existing `-fxray-instrument-always=` and
`-fxray-instrument-never=` flags, in favour of `-fxray-attr-list=`.
This fixes http://llvm.org/PR34721.
Reviewers: echristo, vlad.tsyrklevich, eugenis
Reviewed By: vlad.tsyrklevich
Subscribers: llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D45357
llvm-svn: 329543
Scheduling models can now describe processor register files and retire control
units. This updates the existing documentation and the README file.
llvm-svn: 329311
This is done in preparation for D45259.
With D45259, models can specify the size of the reorder buffer, and the retire
throughput directly via tablegen.
llvm-svn: 329274
Summary:
This is a first version of the AMDPAL code conventions.
Further updates will undoubtably be required to fully
document AMDPAL.
Subscribers: nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D45246
llvm-svn: 329188
Summary:
[llvm-exegesis][RFC] Automatic Measurement of Instruction Latency/Uops
This is the code corresponding to the RFC "llvm-exegesis Automatic Measurement of Instruction Latency/Uops".
The RFC is available on the LLVM mailing lists as well as the following document
for easier reading:
https://docs.google.com/document/d/1QidaJMJUyQdRrFKD66vE1_N55whe0coQ3h1GpFzz27M/edit?usp=sharing
Subscribers: mgorny, gchatelet, orwant, llvm-commits
Differential Revision: https://reviews.llvm.org/D44519
llvm-svn: 329156
Summary:
Introduce the ShadowCallStack function attribute. It's added to
functions compiled with -fsanitize=shadow-call-stack in order to mark
functions to be instrumented by a ShadowCallStack pass to be submitted
in a separate change.
Reviewers: pcc, kcc, kubamracek
Reviewed By: pcc, kcc
Subscribers: cryptoad, mehdi_amini, javed.absar, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44800
llvm-svn: 329108
Before this patch, the "BackendStatistics" view was responsible for printing the
register file usage (as well as many other statistics).
Now users can enable register file usage statistics using the command line flag
`-register-file-stats`. By default, the tool doesn't print register file
statistics.
llvm-svn: 329083
Summary:
A recent addition to Coroutines TS (https://wg21.link/p0913) adds a pre-defined coroutine noop_coroutine that does nothing.
To implement this feature, we implemented an llvm.coro.noop intrinsic that returns a coroutine handle to a coroutine that does nothing when resumed or destroyed.
Reviewers: EricWF, modocache, rnk, lewissbaker
Reviewed By: modocache
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45114
llvm-svn: 328986
When running dsymutil as part of your build system, it can be desirable
for warnings to be part of the end product, rather than just being
emitted to the output stream. This patch upstreams that functionality.
Differential revision: https://reviews.llvm.org/D44639
llvm-svn: 328965
Fixes for "lets" references which should be "let's" in the Kaleidoscope
tutorial.
Patch by: Robin Dupret
Differential Revision: https://reviews.llvm.org/D44990
llvm-svn: 328772
Summary:
As we are only doing X.0.Z releases (not using the minor version), there is no need to keep -X.Y in the version.
Like patch https://reviews.llvm.org/D41808, I propose that we rename libLLVM-7.0svn.so to libLLVM-7svn.so
This patch will also rename downstream libraries like liblldb-7.0 to liblldb-7
Reviewers: axw, beanz, dim, hans
Reviewed By: dim, hans
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D41869
llvm-svn: 328768
Summary:
We previously emulated multi-staged builds using two dockerfiles,
native support from Docker allows us to merge them into one,
simplifying our scripts.
For more details about multi-stage builds, see:
https://docs.docker.com/develop/develop-images/multistage-build/
Reviewers: mehdi_amini, klimek, sammccall
Reviewed By: sammccall
Subscribers: llvm-commits, ioeric, cfe-commits
Differential Revision: https://reviews.llvm.org/D44787
llvm-svn: 328503
Document that flag -resource-pressure can be used to enable/disable the resource
pressure view. This change should have been part of r328305.
llvm-svn: 328492
The goal of this patch is to address most of PR36874. To fully fix PR36874 we
need to split the "InstructionInfo" view from the "SummaryView". That would make
easy to check the latency and rthroughput as well.
The patch reuses all the logic from ResourcePressureView to print out the
"instruction tables".
We have an entry for every instruction in the input sequence. Each entry reports
the theoretical resource pressure distribution. Resource pressure is uniformly
distributed across all the processor resource units of a group.
At the moment, the backend pipeline is not configurable, so the only way to fix
this is by creating a different driver that simply sends instruction events to
the resource pressure view. That means, we don't use the Backend interface.
Instead, it is simpler to just have a different code-path for when flag
-instruction-tables is specified.
Once Clement addresses bug 36663, then we can port the "instruction tables"
logic into a stage of our configurable pipeline.
Updated the BtVer2 test cases (thanks Simon for the help). Now we pass flag
-instruction-tables to each modified test.
Differential Revision: https://reviews.llvm.org/D44839
llvm-svn: 328487
Add two additional implicit arguments for OpenCL for the AMDGPU target using the AMDHSA runtime to support device enqueue.
Differential Revision: https://reviews.llvm.org/D44697
llvm-svn: 328351
- Remove use of the opencl and amdopencl environment member of the target triple for the AMDGPU target.
- Use function attribute to communicate to the AMDGPU backend to add implicit arguments for OpenCL kernels for the AMDHSA OS.
Differential Revision: https://reviews.llvm.org/D43736
llvm-svn: 328349
We were inconsistent, sometimes even within a single sentence.
The consensus seems clear that the FP we're looking for is
spelled "floating-point". Without the hyphen, it's a
"surprisingly fine" jazz album.
llvm-svn: 328098
Follow-up for D44216: add a section and examples to describe the FP env.
Also, add pointers from the FP instructions to this new section to reduce
bloat.
Differential Revision: https://reviews.llvm.org/D44318
llvm-svn: 327998
Summary:
Cast-from-string for records isn't going away, but cast-from-string for
variables is a pretty dodgy feature to have, especially when referencing
template arguments. It's doubtful that this ever worked in a reliable
way, and nobody seems to be using it, so let's get rid of it and get
some related cleanups.
Change-Id: I395ac8a43fef4cf98e611f2f552300d21e99b66a
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D44195
llvm-svn: 327844
Now that almost all functionality of Apple's dsymutil has been
upstreamed, the open source variant can be used as a drop in
replacement. Hence we feel it's no longer necessary to have the llvm
prefix.
Differential revision: https://reviews.llvm.org/D44527
llvm-svn: 327790
X86 Supports Indirect Branch Tracking (IBT) as part of Control-Flow Enforcement Technology (CET).
IBT instruments ENDBR instructions used to specify valid targets of indirect call / jmp.
The `nocf_check` attribute has two roles in the context of X86 IBT technology:
1. Appertains to a function - do not add ENDBR instruction at the beginning of the function.
2. Appertains to a function pointer - do not track the target function of this pointer by adding nocf_check prefix to the indirect-call instruction.
This patch implements `nocf_check` context for Indirect Branch Tracking.
It also auto generates `nocf_check` prefixes before indirect branchs to jump tables that are guarded by range checks.
Differential Revision: https://reviews.llvm.org/D41879
llvm-svn: 327767
Now the Windows mangling modes ('w' and 'x') do not do any mangling for
symbols starting with '?'. This means that clang can stop adding the
hideous '\01' leading escape. This means LLVM debug logs are less likely
to contain ASCII escape characters and it will be easier to copy and
paste MS symbol names from IR.
Finally.
For non-Windows platforms, names starting with '?' still get IR
mangling, so once clang stops escaping MS C++ names, we will get extra
'_' prefixing on MachO. That's fine, since it is currently impossible to
construct a triple that uses the MS C++ ABI in clang and emits macho
object files.
Differential Revision: https://reviews.llvm.org/D7775
llvm-svn: 327734
Additionally, allow more than two operands to !con, !add, !and, !or
in the same way as is already allowed for !listconcat and !strconcat.
Change-Id: I9659411f554201b90cd8ed7c7e004d381a66fa93
Differential revision: https://reviews.llvm.org/D44112
llvm-svn: 327494
This makes using !dag more convenient in some cases.
Change-Id: I0a8c35e15ccd1ecec778fd1c8d64eee38d74517c
Differential revision: https://reviews.llvm.org/D44111
llvm-svn: 327493
This allows constructing DAG nodes with programmatically determined
names, and can simplify constructing DAG nodes in other cases as
well.
Also, add documentation and some very simple tests for the already
existing !con.
Change-Id: Ida61cd82e99752548d7109ce8da34d29da56a5f7
Differential revision: https://reviews.llvm.org/D44110
llvm-svn: 327492
LoopInstSimplify is unused and untested. Reading through the commit
history the pass also seems to have a high maintenance burden.
It would be best to retire the pass for now. It should be easy to
recover if we need something similar in the future.
Differential Revision: https://reviews.llvm.org/D44053
llvm-svn: 327329
Also, fix the undef vs. UB example to use 'sdiv' because that can trigger div-by-zero UB.
The existing text for the constrained intrinsics says:
"By default, LLVM optimization passes assume that the rounding mode is round-to-nearest
and that floating point exceptions will not be monitored. Constrained FP intrinsics are
used to support non-default rounding modes and accurately preserve exception behavior
without compromising LLVM’s ability to optimize FP code when the default behavior is
used."
...so the additional text with the normal FP opcodes should make the different modes
clear.
Differential Revision: https://reviews.llvm.org/D44216
llvm-svn: 327138
Allows capturing a list of concrete instantiated defs.
This can be combined with foreach to create parallel sets of def
instantiations with less repetition in the source. This purpose is
largely also served by multiclasses, but in some cases multiclasses
can't be used.
The motivating example for this change is having a large set of
intrinsics, which are generated from the IntrinsicsBackend.td file
included by Intrinsics.td, and a corresponding set of instruction
selection patterns, which are generated via the backend's .td files.
Multiclasses cannot be used to eliminate the redundancy in this case,
because a multiclass cannot span both LLVM's common .td files and
the backend .td files at the same time.
Change-Id: I879e35042dceea542a5e6776fad23c5e0e69e76b
Differential revision: https://reviews.llvm.org/D44109
llvm-svn: 327121
The changes to FieldInit are required to make field references (Def.field)
work inside a ForeachDeclaration: previously, Def.field wasn't resolved
immediately when Def was already a fully resolved DefInit.
Change-Id: I9875baec2fc5aac8c2b249e45b9cf18c65ae699b
llvm-svn: 327120
In an example like "clang -fxray-instrument .." the .. could be confused
with a literal .. (parent directory), which is used in commands like
"cmake -GNinja .."
llvm-svn: 327000
llvm-mca is an LLVM based performance analysis tool that can be used to
statically measure the performance of code, and to help triage potential
problems with target scheduling models.
llvm-mca uses information which is already available in LLVM (e.g. scheduling
models) to statically measure the performance of machine code in a specific cpu.
Performance is measured in terms of throughput as well as processor resource
consumption. The tool currently works for processors with an out-of-order
backend, for which there is a scheduling model available in LLVM.
The main goal of this tool is not just to predict the performance of the code
when run on the target, but also help with diagnosing potential performance
issues.
Given an assembly code sequence, llvm-mca estimates the IPC (instructions per
cycle), as well as hardware resources pressure. The analysis and reporting style
were mostly inspired by the IACA tool from Intel.
This patch is related to the RFC on llvm-dev visible at this link:
http://lists.llvm.org/pipermail/llvm-dev/2018-March/121490.html
Differential Revision: https://reviews.llvm.org/D43951
llvm-svn: 326998
- Improve description of XNACK ELF flag.
- Rename all uses of wave to wavefront to be consistent.
Differential Revision: https://reviews.llvm.org/D43983
llvm-svn: 326989
Summary:
Distinguish two relationships between types: is-a and convertible-to.
For example, a bit is not an int or vice versa, but they can be
converted into each other (with range checks that you can think of
as "dynamic": unlike other type checks, those range checks do not
happen during parsing, but only once the final values have been
established).
Actually converting initializers between types is subtle: even
when values of type A can be converted to type B (e.g. int into
string), it may not be possible to do so with a concrete initializer
(e.g., a VarInit that refers to a variable of type int cannot
be immediately converted to a string).
For this reason, distinguish between getCastTo and convertInitializerTo:
the latter implements the actual conversion when appropriate, while
the former will first try to do the actual conversion and fall back
to introducing a !cast operation so that the conversion will be
delayed until variable references have been resolved.
To make the approach of adding !cast operations to work, !cast needs
to fallback to convertInitializerTo when the special string <-> record
logic does not apply.
This enables casting records to a subclass, although that new
functionality is only truly useful together with !isa, which will be
added in a later change.
The test is removed because it uses !srl on a bit sequence,
which cannot really be supported consistently, but luckily
isn't used anywhere either.
Change-Id: I98168bf52649176654ed2ec61a29bdb29970cfe7
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43753
llvm-svn: 326785
Summary:
This changes the syntax of !foreach so that the first "parameter" is
a new syntactic variable: !foreach(x, lst, expr) will define the
variable x within the scope of expr, and evaluation of the !foreach
will substitute elements of the given list (or dag) for x in expr.
Aside from leading to a nicer syntax, this allows more complex
expressions where x is deeply nested, or even constant expressions
in which x does not occur at all.
!foreach is currently not actually used anywhere in trunk, but I
plan to use it in the AMDGPU backend. If out-of-tree targets are
using it, they can adjust to the new syntax very easily.
Change-Id: Ib966694d8ab6542279d6bc358b6f4d767945a805
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits, tpr
Differential Revision: https://reviews.llvm.org/D43651
llvm-svn: 326705
Adrian Sampson's blog post provides a good and relatively up-do-date
introduction to LLVM. I think this post could be helpful for people wanting
to get started with LLVM.
Reviewers: asb, tonic, silvas, probinson, kristof.beyls, rengolin
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D42904
llvm-svn: 326576
Add a `LLVM_INSTALL_CCTOOLS_SYMLINKS` to mirror
`LLVM_INSTALL_BINUTILS_SYMLINKS`. For now, this allows us to create
symlinks for `dsymutil` to `llvm-dsymutil`. This option is off by
default, but the user can enable it.
llvm-svn: 326381
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
Summary:
Returns the size of a list. I have found this to be rather useful in some
development for the AMDGPU backend where we could simplify our .td files
by concatenating list<LLVMType> for complex intrinsics. Doing so requires
us to compute the position argument for LLVMMatchType.
Basically, the usage is in a pattern that looks somewhat like this:
list<LLVMType> argtypes =
!listconcat(base,
[llvm_any_ty, LLVMMatchType<!size(base)>]);
Change-Id: I360a0b000fd488d18bea412228230fd93722bd2c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits, tpr
Differential Revision: https://reviews.llvm.org/D43553
llvm-svn: 325883
Summary:
This adds initial support for letting targets specify which address
spaces their functions should reside in by default.
If a function is created by a frontend, it will get the default address space specified in the DataLayout, unless the frontend explicitly uses a more general `llvm::Function` constructor. Function address spaces will become a part of the bitcode and textual IR forms, as we do not have access to a data layout whilst parsing LL.
It will be possible to write IR that explicitly has `addrspace(n)` on a function. In this case, the function will reside in the specified space, ignoring the default in the DL.
This is the first step towards placing functions into the correct
address space for Harvard architectures.
Full patchset
* Add program address space to data layout D37052
* Require address space to be specified when creating functions D37054
* [clang] Require address space to be specified when creating functions D37057
Reviewers: pcc, arsenm, kparzysz, hfinkel, theraven
Reviewed By: theraven
Subscribers: arichardson, simoncook, rengolin, wdng, uabelho, bjope, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D37052
llvm-svn: 325479
Summary:
In LLVM, 't' selects a floating-point/SIMD register and only supports
32-bit values. This is appropriately documented in the LLVM Language
Reference Manual. However, this behaviour diverges from that of GCC, where
't' selects the s0-s31 registers and its qX and dX variants depending on
additional operand modifiers (q/P).
For example, the following C code:
#include <arm_neon.h>
float32x4_t a, b, x;
asm("vadd.f32 %0, %1, %2" : "=t" (x) : "t" (a), "t" (b))
results in the following assembly if compiled with GCC:
vadd.f32 s0, s0, s1
whereas LLVM will show "error: couldn't allocate output register for
constraint 't'", since a, b, x are 128-bit variables, not 32-bit.
This patch extends the use of 't' to mean that of GCC, thus allowing
selection of the lower Q vector regs and their D/S variants. For example,
the earlier code will now compile as:
vadd.f32 q0, q0, q1
This behaviour still differs from that of GCC but I think it is actually
more correct, since LLVM picks up the right register type based on the
datatype of x, while GCC would need an extra operand modifier to achieve
the same result, as follows:
asm("vadd.f32 %q0, %q1, %q2" : "=t" (x) : "t" (a), "t" (b))
Since this is only an extension of functionality, existing code should not
be affected by this change. Note that operand modifiers q/P are already
supported by LLVM, so this patch should suffice to support inline
assembly with constraint 't' originally built for GCC.
Reviewers: grosbach, rengolin
Reviewed By: rengolin
Subscribers: rogfer01, efriedma, olista01, aemerson, javed.absar, eraman, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42962
llvm-svn: 325244
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
This commit attempts to re-land the r324480 which was reverted in
r324493 because it broke the Windows bots. For now I disabled the two
update tests on Windows until I'm able to debug this.
Differential revision: https://reviews.llvm.org/D42880
llvm-svn: 324592
Note: This is a candidate for LLVM 6.0, because it was planned to be
in that release but was delayed due to a long review period.
Merge conflict in release_60 - resolution:
Add "-p6:32:32" into the second (non-amdgiz) string.
Only scalar loads support 32-bit pointers. An address in a VGPR will
fail to compile. That's OK because the results of loads will only be used
in places where VGPRs are forbidden.
Updated AMDGPUAliasAnalysis and used SReg_64_XEXEC.
The tests cover all uses cases we need for Mesa.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D41651
llvm-svn: 324487
Now that dsymutil can generate accelerator tables, we can upstream the
update logic that, as the name implies, updates the accelerator tables
in an existing dSYM bundle. In combination with `-minimize` this can be
used to remove redundant .debug_(inlines|pubtypes|pubnames).
Differential revision: https://reviews.llvm.org/D42880
llvm-svn: 324480
Summary:
The signatures for the builtins @llvm.memcpy, @llvm.memmove, and @llvm.memset
where changed in rL322965. The number of arguments has decreased from five to
four with the removal of the alignment argument. Alignment is now conveyed
by supplying the align parameter attribute on the destination and/or source of
the cpy/move/set.
llvm-svn: 324265
(I suppose these two pieces could be separated - but seemed related
enough)
As discussed on llvm-dev, this documents the general expectation of how
library layering should be handled. There are a few existing cases where
these constraints are not met, but as with most style guide things -
this is forward looking and provides guidance when cleaning up existing
code, it doesn't immediately require that all previous code be cleaned
up to match. (see: naming conventions, etc)
Differential Revision: https://reviews.llvm.org/D42771
llvm-svn: 324004
"path" is too generic name for -L or --library-path because a lot of
linker options take paths as arguments. This change renames the option
to avoid confusion.
Differential Revision: https://reviews.llvm.org/D42705
llvm-svn: 323833
- If ReqdWorkGroupSize is present it must have all elements >=1.
- If MaxFlatWorkGroupSize must be consistent with ReqdWorkGroupSize.
- Remove FixedWorkGroupSize as now equivalent to ReqdWorkGroupSize.
llvm-svn: 323829
Passing -minimize to dsymutil prevents the emission of .debug_inlines,
.debug_pubnames, and .debug_pubtypes in favor of the Apple accelerator
tables.
The actual check in the DWARF linker was added in r323655. This patch
simply enables it.
Differential revision: https://reviews.llvm.org/D42688
llvm-svn: 323812
Introduce an extension to support passing linker options to the linker.
These would be ignored by older linkers, but newer linkers which support
this feature would be able to process the linker.
Emit a special discarded section `.linker-option`. The content of this
section is a pair of strings (key, value). The key is a type identifier for
the parameter. This allows for an argument free parameter that will be
processed by the linker with the value being the parameter. As an example,
`lib` identifies a library to be linked against, traditionally the `-l`
argument for Unix-based linkers with the parameter being the library name.
Thanks to James Henderson, Cary Coutant, Rafael Espinolda, Sean Silva
for the valuable discussion on the design of this feature.
llvm-svn: 323783
Summary: This is a simple change to test commit access with.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42586
llvm-svn: 323544
Combine expression patterns to form expressions with fewer, simple instructions.
This pass does not modify the CFG.
For example, this pass reduce width of expressions post-dominated by TruncInst
into smaller width when applicable.
It differs from instcombine pass in that it contains pattern optimization that
requires higher complexity than the O(1), thus, it should run fewer times than
instcombine pass.
Differential Revision: https://reviews.llvm.org/D38313
llvm-svn: 323321
Summary:
This patch extends the DISubrange 'count' field to take either a
(signed) constant integer value or a reference to a DILocalVariable
or DIGlobalVariable.
This is patch [1/3] in a series to extend LLVM's DISubrange Metadata
node to support debugging of C99 variable length arrays and vectors with
runtime length like the Scalable Vector Extension for AArch64. It is
also a first step towards representing more complex cases like arrays
in Fortran.
Reviewers: echristo, pcc, aprantl, dexonsmith, clayborg, kristof.beyls, dblaikie
Reviewed By: aprantl
Subscribers: rnk, probinson, fhahn, aemerson, rengolin, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D41695
llvm-svn: 323313
Summary:
This is the first attempt to write down a guideline on adding exception handling support for a target. The content basically bases on the discussion on [1]. If you guys know who is exception handling expert, please add him as the reviewer. Thanks.
[1] http://lists.llvm.org/pipermail/llvm-dev/2018-January/120405.html
Reviewers: t.p.northover, theraven, nemanjai
Reviewed By: theraven
Subscribers: sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D42178
llvm-svn: 323311
This clarification was suggested by @efriedma in D41335, which uses this
behavior to inline musttail calls with varargs.
Reviewers: hfinkel, efriedma, rnk
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D41861
llvm-svn: 322786
Change symbol values in the stack_size section from being 8 bytes, to being a target dependent size.
Differential Revision: https://reviews.llvm.org/D42108
llvm-svn: 322619
Summary:
The LLVM Bitcode File Format documentation states that all bitstreams
begin with the magic number 'BC', and that generic bitstream analyzer
tools may check for this number in order to determine whether the
stream is a bitstream.
However, in practice:
* Only LLVM IR bitcode begins with 'BC'. Other bitstreams -- Clang
AST files and precompiled headers, Clang serialized diagnostics,
Swift modules -- do not start with 'BC'. A tool that actually checked
for 'BC' would only be able to recognize LLVM IR.
* The `llvm-bcanalyzer`, arguably the most used generic bitstream
analyzer tool, does not check for a magic number 'BC' (except to
determine whether the file is LLVM IR).
Update the bitcode format documentation to make it clear that not all
bitstreams begin with 'BC', and that tools should not rely on that
particular magic number value.
Test Plan:
Build the `docs-llvm-html` target and confirm the changes render in
a Safari web browser.
Reviewers: harlanhaskins, eugenis, mehdi_amini, pcc, angerman
Reviewed By: angerman
Subscribers: angerman, llvm-commits
Differential Revision: https://reviews.llvm.org/D42002
llvm-svn: 322520
This adds some more detail about the PDB container format,
specifically surrounding the layout of the Free Page Map.
Patch by Colden Cullen
Differential Revision: https://reviews.llvm.org/D41825
llvm-svn: 322404
Summary:
In D41919, I missed that there was a *second* step when uploading
diffs via web where the repository should be specified.
Reviewers: asb, probinson
Reviewed By: asb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41956
llvm-svn: 322375
Summary:
Docs are out of date now that we have separate repositories for LLVM,
Clang, etc.
Reviewers: asb
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D41919
llvm-svn: 322290
We are printing / parsing the `frame-setup` MachineInstr flag but not
the `frame-destroy` one.
Differential Revision: https://reviews.llvm.org/D41509
llvm-svn: 322071
Summary:
The documentation has fallen a bit behind, update it with the latest evolution
of the allocator:
- clarify a couple of expectations regarding what is meant to be achieved;
- update the header format;
- document `-fsanitize=scudo`.
Reviewers: alekseyshl, flowerhack
Reviewed By: alekseyshl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41670
llvm-svn: 321811
This new page acts as an entry point for (new) contributors to LLVM and
provides information about
* What to contribute
* How to submit a patch
* Where to start to learn more about LLVM's architecture and internals.
This version of the page duplicates some information from the
DeveloperPolicy and Phabricator pages. Subsequent changes should work
towards moving information for new developers to this page, where it
makes sense.
Reviewers: reames, probinson, kristof.beyls, silvas, rengolin, asb
Reviewed By: silvas
Differential Revision: https://reviews.llvm.org/D41665
llvm-svn: 321804
The examples in llvm/Support/Debug.h use `DEBUG(dbgs() << ...)` instead
of `errs()`, so the examples in the Programmer's Manual should match
that.
Patch by: Moritz Sichert <moritz.sichert@googlemail.com>
Differential revision: https://reviews.llvm.org/D41170
llvm-svn: 321444
Work towards the unification of MIR and debug output by refactoring the
interfaces.
Also add support for printing with a null TargetIntrinsicInfo and no
MachineFunction.
llvm-svn: 321111
Work towards the unification of MIR and debug output by refactoring the
interfaces.
Before this patch we printed "<call frame instruction>" in the debug
output.
llvm-svn: 321084
LLVM IR function names which disable mangling start with '\01'
(https://www.llvm.org/docs/LangRef.html#identifiers).
When an identifier like "\01@abc@" gets dumped to MIR, it is quoted, but
only with single quotes.
http://www.yaml.org/spec/1.2/spec.html#id2770814:
"The allowed character range explicitly excludes the C0 control block
allowed), the surrogate block #xD800-#xDFFF, #xFFFE, and #xFFFF."
http://www.yaml.org/spec/1.2/spec.html#id2776092:
"All non-printable characters must be escaped.
[...]
Note that escape sequences are only interpreted in double-quoted scalars."
This patch adds support for printing escaped non-printable characters
between double quotes if needed.
Should also fix PR31743.
Differential Revision: https://reviews.llvm.org/D41290
llvm-svn: 320996
Work towards the unification of MIR and debug output by printing
`<mcsymbol sym>` instead of `<MCSym=sym>`.
Only debug syntax is affected.
llvm-svn: 320685
Work towards the unification of MIR and debug output by printing `target-index(target-specific) + 8` instead of `<ti#0+8>` and `target-index(target-specific) + 8` instead of `<ti#0-8>`.
Only debug syntax is affected.
llvm-svn: 320565
Work towards the unification of MIR and debug output by printing
`%const.0 + 8` instead of `<cp#0+8>` and `%const.0 - 8` instead of
`<cp#0-8>`.
Only debug syntax is affected.
Differential Revision: https://reviews.llvm.org/D41116
llvm-svn: 320564
This change makes XRay print the log file output only when the verbosity
level is higher than 0. It reduces the log spam in the default case when
we want XRay running silently, except when there are actual
fatal/serious errors.
We also update the documentation to show how to get the information
after the change to the default behaviour.
llvm-svn: 320550
Summary:
Add isRenamable() predicate to MachineOperand. This predicate can be
used by machine passes after register allocation to determine whether it
is safe to rename a given register operand. Register operands that
aren't marked as renamable may be required to be assigned their current
register to satisfy constraints that are not captured by the machine
IR (e.g. ABI or ISA constraints).
Reviewers: qcolombet, MatzeB, hfinkel
Subscribers: nemanjai, mcrosier, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D39400
llvm-svn: 320503
Correct committed version to match intended accepted review D40051 id=123417
- Rename Bonaire target to be gfx704.
- Eliminate gfx800 and make Iceland and Tonga both use gfx802 as they use the same code.
- List target features supported by each processor in the processor table together with the default value.
- Add xnack flag to e_flags.
- Remove xnack from kernel metadata and kernel descriptor since it is now a whole code object property.
Differential Revision: https://reviews.llvm.org/D40051
llvm-svn: 320457
Summary:
That allows to get the same data as produced by "llvm-cov report",
but in JSON format, which is better for further processing by end users.
Reviewers: vsk
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D41085
llvm-svn: 320435
- Rename Bonaire target to be gfx704.
- Eliminate gfx800 and make Iceland and Tonga both use gfx802 as they use the same code.
- List target features supported by each processor in the processor table together with the default value.
- Add xnack flag to e_flags.
- Remove xnack from kernel metadata and kernel descriptor since it is now a whole code object property.
Differential Revision: https://reviews.llvm.org/D40051
llvm-svn: 320378
Summary:
This is LLVM instrumentation for the new HWASan tool. It is basically
a stripped down copy of ASan at this point, w/o stack or global
support. Instrumenation adds a global constructor + runtime callbacks
for every load and store.
HWASan comes with its own IR attribute.
A brief design document can be found in
clang/docs/HardwareAssistedAddressSanitizerDesign.rst (submitted earlier).
Reviewers: kcc, pcc, alekseyshl
Subscribers: srhines, mehdi_amini, mgorny, javed.absar, eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D40932
llvm-svn: 320217
Work towards the unification of MIR and debug output by refactoring the
interfaces.
Add support for operand subreg index as an immediate to debug printing
and use ::print in the MIRPrinter.
Differential Review: https://reviews.llvm.org/D40965
llvm-svn: 320209
The Debugify pass synthesizes debug info for IR. It's paired with a
CheckDebugify pass which determines how much of the original debug info
is preserved. These passes make it easier to create targeted tests for
debug info preservation.
Here is the Debugify algorithm:
NextLine = 1
for (Instruction &I : M)
attach DebugLoc(NextLine++) to I
NextVar = 1
for (Instruction &I : M)
if (canAttachDebugValue(I))
attach dbg.value(NextVar++) to I
The CheckDebugify pass expects contiguous ranges of DILocations and
DILocalVariables. If it fails to find all of the expected debug info, it
prints a specific error to stderr which can be FileChecked.
This was discussed on llvm-dev in the thread:
"Passes to add/validate synthetic debug info"
Differential Revision: https://reviews.llvm.org/D40512
llvm-svn: 320202
This marks certain flags in XRay as deprecated (in particular,
`xray_naive_log=` and `xray_fdr_log=`), and recommends the use of the
`xray_mode=` flag.
llvm-svn: 319763
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
As noted in D40594, the frem instruction corresponds to fmod() except that it can't set errno.
I modified the text that we currently use for intrinsics that map to libm functions and applied
it to frem.
Differential Revision: https://reviews.llvm.org/D40629
llvm-svn: 319437
Re applying after fixing issues in the diff, sorry for any painful conflicts/merges!
Original RFC: http://lists.llvm.org/pipermail/llvm-dev/2017-August/117028.html
This change adds a '.stack-size' section containing metadata on function stack sizes to output ELF files behind the new -stack-size-section flag. The section contains pairs of function symbol references (8 byte) and stack sizes (unsigned LEB128).
The contents of this section can be used to measure changes to stack sizes between different versions of the compiler or a source base. The advantage of having a section is that we can extract this information when examining binaries that we didn't build, and it allows users and tools easy access to that information just by referencing the binary.
There is a follow up change to add an option to clang.
Thanks.
Reviewers: hfinkel, MatzeB
Reviewed By: MatzeB
Subscribers: thegameg, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39788
llvm-svn: 319430
Summary:
Original RFC: http://lists.llvm.org/pipermail/llvm-dev/2017-August/117028.html
I wasn't sure who to put as reviewers, so please add/remove people as appropriate.
This change adds a '.stack-size' section containing metadata on function stack sizes to output ELF files behind the new -stack-size-section flag. The section contains pairs of function symbol references (8 byte) and stack sizes (unsigned LEB128).
The contents of this section can be used to measure changes to stack sizes between different versions of the compiler or a source base. The advantage of having a section is that we can extract this information when examining binaries that we didn't build, and it allows users and tools easy access to that information just by referencing the binary.
There is a follow up change to add an option to clang.
Thanks.
Reviewers: hfinkel, MatzeB
Reviewed By: MatzeB
Subscribers: thegameg, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39788
llvm-svn: 319423
We've recently changed the default for `xray_naive_log=` to be `false`
instead of `true` to make it more consistent with the FDR mode logging
implementation. This means we will now ask users to explicitly choose
which version of the XRay logging is being used.
llvm-svn: 319400
This patch adds a new abstraction layer to VPlan and leverages it to model the planned
instructions that manipulate masks (AND, OR, NOT), introduced during predication.
The new VPValue and VPUser classes model how data flows into, through and out
of a VPlan, forming the vertices of a planned Def-Use graph. The new
VPInstruction class is a generic single-instruction Recipe that models a
planned instruction along with its opcode, operands and users. See
VectorizationPlan.rst for more details.
Differential Revision: https://reviews.llvm.org/D38676
llvm-svn: 318645
Differential Revision: https://reviews.llvm.org/D39737
This is the second attempt to commit this. The test was broken on Linux in the first attempt.
llvm-svn: 318560
llvm.invariant.group.barrier may accept pointers to arbitrary address space.
This patch let it accept pointers to i8 in any address space and returns
pointer to i8 in the same address space.
Differential Revision: https://reviews.llvm.org/D39973
llvm-svn: 318413
This change adds generic fuzzing tools capable of running libFuzzer tests on
any optimization pass or combination of them.
Differential Revision: https://reviews.llvm.org/D39555
llvm-svn: 317883
- Use ELF header flags to identify processor.
- Remove isa note record.
- Add target feature section.
- Make metadata for NumVGPRs, NumSGPRs and MaxFlatWorkGroupSize required.
- Add FixedWorkGroupSize to CodeProps metadata.
- Add ReqdWorkGroupSize* to kernel descriptor and move MaxFlatWorkGroupSize to be adjacent.
- Move IsXNACKEnabled in the kernel descriptor to be at the end of the unused flags.
- Remove IsDynamicCallStack from the metadata and kernel descriptor.
- Remove legacy debugger metadata.
- Remove old XNACK enabled processor names.
Differential Revision: https://reviews.llvm.org/D39828
llvm-svn: 317855
This patch implements Chandler's idea [0] for supporting languages that
require support for infinite loops with side effects, such as Rust, providing
part of a solution to bug 965 [1].
Specifically, it adds an `llvm.sideeffect()` intrinsic, which has no actual
effect, but which appears to optimization passes to have obscure side effects,
such that they don't optimize away loops containing it. It also teaches
several optimization passes to ignore this intrinsic, so that it doesn't
significantly impact optimization in most cases.
As discussed on llvm-dev [2], this patch is the first of two major parts.
The second part, to change LLVM's semantics to have defined behavior
on infinite loops by default, with a function attribute for opting into
potential-undefined-behavior, will be implemented and posted for review in
a separate patch.
[0] http://lists.llvm.org/pipermail/llvm-dev/2015-July/088103.html
[1] https://bugs.llvm.org/show_bug.cgi?id=965
[2] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118632.html
Differential Revision: https://reviews.llvm.org/D38336
llvm-svn: 317729
Summary:
This makes it very easy to test files that only differ in a constant
value somewhere in the test case.
Reviewers: jlebar, hfinkel, chandlerc, probinson
Reviewed By: probinson
Subscribers: probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D39629
llvm-svn: 317572
This document contains information on how to cross-compile the compiler-rt
builtins library for several flavours of Arm target and how to test the
libraries using qemu.
Differential Revision: https://reviews.llvm.org/D39600
llvm-svn: 317554
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-November/107104.html
and again more recently:
http://lists.llvm.org/pipermail/llvm-dev/2017-October/118118.html
...this is a step in cleaning up our fast-math-flags implementation in IR to better match
the capabilities of both clang's user-visible flags and the backend's flags for SDNode.
As proposed in the above threads, we're replacing the 'UnsafeAlgebra' bit (which had the
'umbrella' meaning that all flags are set) with a new bit that only applies to algebraic
reassociation - 'AllowReassoc'.
We're also adding a bit to allow approximations for library functions called 'ApproxFunc'
(this was initially proposed as 'libm' or similar).
...and we're out of bits. 7 bits ought to be enough for anyone, right? :) FWIW, I did
look at getting this out of SubclassOptionalData via SubclassData (spacious 16-bits),
but that's apparently already used for other purposes. Also, I don't think we can just
add a field to FPMathOperator because Operator is not intended to be instantiated.
We'll defer movement of FMF to another day.
We keep the 'fast' keyword. I thought about removing that, but seeing IR like this:
%f.fast = fadd reassoc nnan ninf nsz arcp contract afn float %op1, %op2
...made me think we want to keep the shortcut synonym.
Finally, this change is binary incompatible with existing IR as seen in the
compatibility tests. This statement:
"Newer releases can ignore features from older releases, but they cannot miscompile
them. For example, if nsw is ever replaced with something else, dropping it would be
a valid way to upgrade the IR."
( http://llvm.org/docs/DeveloperPolicy.html#ir-backwards-compatibility )
...provides the flexibility we want to make this change without requiring a new IR
version. Ie, we're not loosening the FP strictness of existing IR. At worst, we will
fail to optimize some previously 'fast' code because it's no longer recognized as
'fast'. This should get fixed as we audit/squash all of the uses of 'isFast()'.
Note: an inter-dependent clang commit to use the new API name should closely follow
commit.
Differential Revision: https://reviews.llvm.org/D39304
llvm-svn: 317488
It is currently not possible to build the documentation with cmake and
the same version of Sphinx (1.5.1) used to generate the public facing
documentation on llvm.org. When code blocks cannot be parsed by
Pygments, it generates a warning which is treated as an error.
In addition to being annoying and confusing for developers, this
needlessly increases the bar for newcomers that want to get involved.
This patch removes the language specifier from the affected block. The
result is the same as when parsing fails: the block are not highlighted.
llvm-svn: 317472
Summary:
Currently the block frequency analysis is an approximation for irreducible
loops.
The new irreducible loop metadata is used to annotate the irreducible loop
headers with their header weights based on the PGO profile (currently this is
approximated to be evenly weighted) and to help improve the accuracy of the
block frequency analysis for irreducible loops.
This patch is a basic support for this.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: mehdi_amini, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D39028
llvm-svn: 317278
The LLVM tools can be used as a replacement for binutils, in which case
it's convenient to create symlinks with the binutils names. Add support
for these symlinks in the build system. As with any other llvm tool
symlinks, the user can limit the installed symlinks by only adding the
desired ones to `LLVM_TOOLCHAIN_TOOLS`.
Differential Revision: https://reviews.llvm.org/D39530
llvm-svn: 317272
Identifies kernels which performs device side kernel enqueues and emit
metadata for the associated hidden kernel arguments. Such kernels are
marked with calls-enqueue-kernel function attribute by
AMDGPUOpenCLEnqueueKernelLowering pass and later on
hidden kernel arguments metadata HiddenDefaultQueue and
HiddenCompletionAction are emitted for them.
Differential Revision: https://reviews.llvm.org/D39255
llvm-svn: 316907
Currently we do not represent runtime preemption in the IR, which has several
drawbacks:
1) The semantics of GlobalValues differ depending on the object file format
you are targeting (as well as the relocation-model and -fPIE value).
2) We have no way of disabling inlining of run time interposable functions,
since in the IR we only know if a function is link-time interposable.
Because of this llvm cannot support elf-interposition semantics.
3) In LTO builds of executables we will have extra knowledge that a symbol
resolved to a local definition and can't be preemptable, but have no way to
propagate that knowledge through the compiler.
This patch adds preemptability specifiers to the IR with the following meaning:
dso_local --> means the compiler may assume the symbol will resolve to a
definition within the current linkage unit and the symbol may be accessed
directly even if the definition is not within this compilation unit.
dso_preemptable --> means that the compiler must assume the GlobalValue may be
replaced with a definition from outside the current linkage unit at runtime.
To ease transitioning dso_preemptable is treated as a 'default' in that
low-level codegen will still do the same checks it did previously to see if a
symbol should be accessed indirectly. Eventually when IR producers emit the
specifiers on all Globalvalues we can change dso_preemptable to mean 'always
access indirectly', and remove the current logic.
Differential Revision: https://reviews.llvm.org/D20217
llvm-svn: 316668
Summary:
When describing trunc/zext/sext/ptrtoint/inttoptr in the chapter
about Constant Expressions we now simply refer to the Instruction
Reference. As far as I know there are no difference when it comes
to the semantics and the argument constraints. The only difference
is that the syntax is slighly different for the constant expressions,
regarding the use of parenthesis in constant expressions.
Referring to the Instruction Reference is the same solution as
already used for several other operations, such as bitcast.
The main goal was to add information that vector types are allowed
also in trunc/zext/sext/ptrtoint/inttoptr constant expressions.
That was not explicitly mentioned earlier, and resulted in some
questions in the review of https://reviews.llvm.org/D38546
Reviewers: efriedma, majnemer
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39165
llvm-svn: 316429
Summary:
Updated the XRayExample docs with instructions for using the llvm-xray stacks
command.
Reviewers: dberris
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39106
llvm-svn: 316192
This patch adds a new kind of metadata that indicates the possible callees of
indirect calls.
Differential Revision: https://reviews.llvm.org/D37354
llvm-svn: 315944
static __global int Var = 0;
__global int* Ptr[] = {&Var};
...
In this case Var is a non premptable symbol and so its address can be used as the value of Ptr, with a base relative relocation that will add the delta between the ELF address and the actual load address. Such relocations do not require a symbol.
Differential Revision: https://reviews.llvm.org/D38909
llvm-svn: 315935
- Update docs to match llvm coding style
- Add missing FP16_OVFL bit for gfx9
- Fix the size of the kernel descriptor in the docs
Differential Revision: https://reviews.llvm.org/D38902
llvm-svn: 315822
This refers to a temporary path that can be shared across all tests,
identified by a particular label. This can be used for things like
caches.
At the moment, the character set for the LABEL is limited to C
identifier characters, plus '-', '+', '=', and '.'. This is the same
set of characters currently allowed in REQUIRES clause identifiers.
llvm-svn: 315697
Minor doc update that the FileCheck matcher supports POSIX ERE.
It also fixes a minor issue in the regexp describing a variable
name: underscores are allowed too.
Differential Revision: https://reviews.llvm.org/D38787
llvm-svn: 315679
Here we add a secondary option parser to llvm-isel-fuzzer (and provide
it for use with other fuzzers). With this, you can copy the fuzzer to
a name like llvm-isel-fuzzer=aarch64-gisel for a fuzzer that fuzzer
AArch64 with GlobalISel enabled, or fuzzer=x86_64 to fuzz x86, with no
flags required. This should be useful for running these in OSS-Fuzz.
Note that this handrolls a subset of cl::opts to recognize, rather
than embedding a complete command parser for argv[0]. If we find we
really need the flexibility of handling arbitrary options at some
point we can rethink this.
This re-applies 315545 using "=" instead of ":" as a separator for
arguments.
llvm-svn: 315557
It broke some tests on Windows:
Failing Tests (4):
LLVM :: tools/llvm-isel-fuzzer/execname-options.ll
LLVM :: tools/llvm-isel-fuzzer/missing-triple.ll
LLVM :: tools/llvm-isel-fuzzer/x86-empty-bc.ll
LLVM :: tools/llvm-isel-fuzzer/x86-empty.ll
> llvm-isel-fuzzer: Handle a subset of backend flags in the executable name
>
> Here we add a secondary option parser to llvm-isel-fuzzer (and provide
> it for use with other fuzzers). With this, you can copy the fuzzer to
> a name like llvm-isel-fuzzer:aarch64-gisel for a fuzzer that fuzzer
> AArch64 with GlobalISel enabled, or fuzzer:x86_64 to fuzz x86, with no
> flags required. This should be useful for running these in OSS-Fuzz.
>
> Note that this handrolls a subset of cl::opts to recognize, rather
> than embedding a complete command parser for argv[0]. If we find we
> really need the flexibility of handling arbitrary options at some
> point we can rethink this.
llvm-svn: 315554
Here we add a secondary option parser to llvm-isel-fuzzer (and provide
it for use with other fuzzers). With this, you can copy the fuzzer to
a name like llvm-isel-fuzzer:aarch64-gisel for a fuzzer that fuzzer
AArch64 with GlobalISel enabled, or fuzzer:x86_64 to fuzz x86, with no
flags required. This should be useful for running these in OSS-Fuzz.
Note that this handrolls a subset of cl::opts to recognize, rather
than embedding a complete command parser for argv[0]. If we find we
really need the flexibility of handling arbitrary options at some
point we can rethink this.
llvm-svn: 315545
This patch adds a post-linking pass which replaces the function pointer of enqueued
block kernel with a global variable (runtime handle) and adds
runtime-handle attribute to the enqueued block kernel.
In LLVM CodeGen the runtime-handle metadata will be translated to
RuntimeHandle metadata in code object. Runtime allocates a global buffer
for each kernel with RuntimeHandel metadata and saves the kernel address
required for the AQL packet into the buffer. __enqueue_kernel function
in device library knows that the invoke function pointer in the block
literal is actually runtime handle and loads the kernel address from it
and puts it into AQL packet for dispatching.
This cannot be done in FE since FE cannot create a unique global variable
with external linkage across LLVM modules. The global variable with internal
linkage does not work since optimization passes will try to replace loads
of the global variable with its initialization value.
Differential Revision: https://reviews.llvm.org/D38610
llvm-svn: 315352
At the last LLVM dev meeting we had a debug info for optimized code
BoF session. In that session I presented some graphs that showed how
the quality of the debug info produced by LLVM changed over the last
couple of years. This is a cleaned up version of the patch I used to
collect the this data. It is implemented as an extension of
llvm-dwarfdump, adding a new --statistics option. The intended
use-case is to automatically run this on the debug info produced by,
e.g., our bots, to identify eyebrow-raising changes or regressions
introduced by new transformations that we could act on.
In the current form, two kinds of data are being collected:
- The number of variables that have a debug location versus the number
of variables in total (this takes into account inlined instances of
the same function, so if a variable is completely missing form only
one instance it will be found).
- The PC range covered by variable location descriptions versus the PC
range of all variables' containing lexical scopes.
The output format is versioned and extensible, so I'm looking forward
to both bug fixes and ideas for other data that would be interesting
to track.
Differential Revision: https://reviews.llvm.org/D36627
llvm-svn: 315101
The fix is to avoid invalidating our insertion point in
replaceDbgDeclare:
Builder.insertDeclare(NewAddress, DIVar, DIExpr, Loc, InsertBefore);
+ if (DII == InsertBefore)
+ InsertBefore = &*std::next(InsertBefore->getIterator());
DII->eraseFromParent();
I had to write a unit tests for this instead of a lit test because the
use list order matters in order to trigger the bug.
The reduced C test case for this was:
void useit(int*);
static inline void inlineme() {
int x[2];
useit(x);
}
void f() {
inlineme();
inlineme();
}
llvm-svn: 313905
.. as well as the two subsequent changes r313826 and r313875.
This leads to segfaults in combination with ASAN. Will forward repro
instructions to the original author (rnk).
llvm-svn: 313876
Summary:
The documentation refers to a boolean that controls whether response files are
handled, but this is incorrect. Since r165535, response files are always
enabled.
Reviewers: compnerd, rafael
Reviewed By: compnerd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38095
llvm-svn: 313830
Summary:
This implements the design discussed on llvm-dev for better tracking of
variables that live in memory through optimizations:
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117222.html
This is tracked as PR34136
llvm.dbg.addr is intended to be produced and used in almost precisely
the same way as llvm.dbg.declare is today, with the exception that it is
control-dependent. That means that dbg.addr should always have a
position in the instruction stream, and it will allow passes that
optimize memory operations on local variables to insert llvm.dbg.value
calls to reflect deleted stores. See SourceLevelDebugging.rst for more
details.
The main drawback to generating DBG_VALUE machine instrs is that they
usually cause LLVM to emit a location list for DW_AT_location. The next
step will be to teach DwarfDebug.cpp how to recognize more DBG_VALUE
ranges as not needing a location list, and possibly start setting
DW_AT_start_offset for variables whose lifetimes begin mid-scope.
Reviewers: aprantl, dblaikie, probinson
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37768
llvm-svn: 313825
Summary: Resubmission of D37937. Fixed i386 target building (conversion from std::size_t& to uint64_t& failed). Fixed documentation warning failure about docs/CFIVerify.rst not being in the tree.
Reviewers: vlad.tsyrklevich
Reviewed By: vlad.tsyrklevich
Patch by Mitch Phillips
Subscribers: sbc100, mgorny, pcc, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D38089
llvm-svn: 313809
Summary: Resubmission of D37937. Fixed i386 target building (conversion from std::size_t& to uint64_t& failed). Fixed documentation warning failure about docs/CFIVerify.rst not being in the tree.
Reviewers: vlad.tsyrklevich
Reviewed By: vlad.tsyrklevich
Patch by Mitch Phillips
Subscribers: mgorny, pcc, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D38089
llvm-svn: 313798
Summary: Introduces the llvm-cfi-verify tool to llvm. Includes the design document (docs/CFIVerify.rst). Current implementation of the tool is simply a disassembler that identifies and prints the indirect control flow instructions.
Reviewers: vlad.tsyrklevich
Reviewed By: vlad.tsyrklevich
Patch by Mitch Phillips
Subscribers: llvm-commits, kcc, pcc, mgorny
Differential Revision: https://reviews.llvm.org/D37937
llvm-svn: 313688
After clang started emitting deferred regions (r312818), llvm-cov has
had a hard time picking reasonable line execuction counts. There have
been one or two generic improvements in this area (e.g r310012), but
line counts can still report coverage for whitespace instead of code
(llvm.org/PR34612).
To fix the problem:
* Introduce a new region kind so that frontends can explicitly label
gap areas.
This is done by changing the encoding of the columnEnd field of
MappingRegion. This doesn't substantially increase binary size, and
makes it easy to maintain backwards-compatibility.
* Don't set the line count to a count from a gap area, unless the count
comes from a wrapped segment.
* Don't highlight gap areas as uncovered.
Fixes llvm.org/PR34612.
llvm-svn: 313597
Summary:
This change adds support for explicit tail-exit records to be written by
the XRay runtime. This lets us differentiate the tail exit
records/events in the log, and allows us to treat those exit events
especially in the future. For now we allow printing those out in YAML
(and reading them in).
Reviewers: kpw, pelikan
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37964
llvm-svn: 313514
Summary:
This intrinsic represents a label with a list of associated metadata
strings. It is modelled as reading and writing inaccessible memory so
that it won't be removed as dead code. I think the intention is that the
annotation strings should appear at most once in the debug info, so I
marked it noduplicate. We are allowed to inline code with annotations as
long as we strip the annotation, but that can be done later.
Reviewers: majnemer
Subscribers: eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D36904
llvm-svn: 312569
The CodingStandards section on avoiding the re-evaluation of end() hasn't been
updated since range-based for loops were adopted in the LLVM codebase. This
patch adds a very brief section that documents how range-based for loops
should be used wherever possible. It also moves example code in
CodingStandards to use range-based for loops and auto when appropriate.
Differential Revision: https://reviews.llvm.org/D37264
llvm-svn: 312236
Summary: Add a -name-whitelist option, which behaves in the same way as -name, but it reads in multiple function names from the given input file(s).
Reviewers: vsk
Reviewed By: vsk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37111
llvm-svn: 312227
Summary:
This reduces the number of build actions after a no-op commit from
thousands to about six, which should be acceptable. If six actions is
still too many, developers can disable the LLVM_APPEND_VC_REV cmake
option.
llvm-config.h is a widely included header that should rarely change.
Before this patch, it would change after every re-configure. Very few
users of llvm-config.h need to know the precise version, and those that
do can migrate to incorporating LLVM_REVISION as provided by
llvm/Support/VCSRevision.h.
This should bring LLVM back to the behavior that it had before r306858
from June 30 2017. Most LLVM tools will now print a version string like
"6.0.0svn" instead of "6.0.0-git-c40c2a23de4".
Fixes PR34308
Reviewers: pcc, rafael, hans
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D37272
llvm-svn: 312043
Summary:
QuarantineSizeMb is deprecated, and QuarantineChunksUpToSize has been added as a new tunable option.
Reviewers: cryptoad
Reviewed By: cryptoad
Differential Revision: https://reviews.llvm.org/D37238
llvm-svn: 312025
Summary:
`getelementptr` is frequently abbreviated as "GEP", often in source files that
do not ever reference the full name of the instruction. Add it to the Lexicon,
in case readers go to look for what it means there.
Test plan:
1. `ninja sphinx`
2. Confirm that the rendered docs HTML contains the new "GEP" entry
llvm-svn: 311168
Use text suggested by Justin Bogner in post-commit review of r311146
<http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20170814/479898.html>,
which makes it clear that report_fatal_error shouldn't be used when there is a
practicable alternative. Also make this clearer in CodingStandards.
llvm-svn: 311147
The current ProgrammersManual.rst document has a lot of well-written
documentation on error handling thanks to @lhames. It suggests errors can be
split cleanly into "programmatic" and "recoverable" errors. However, the
reality in current LLVM seems to be there are a number of cases where a
non-programmatic error is not easily recoverable. Therefore, add a note to
indicate the existence of report_fatal_error for these cases. I've also added
a reminder to CodingStandards.rst in the section on assertions, to indicate
that llvm_unreachable and assertions should not be relied upon to report
errors triggered by user input.
The ProgrammersManual is also silent on the use of LLVMContext::diagnose,
which is used in BPF+WebAssembly+AMDGPU to report some errors during
instruction selection. I don't address that in this patch, as it's not quite
clear how to fit in to the current error handling story
Differential Revision: https://reviews.llvm.org/D36826
llvm-svn: 311146
CMake primer.
This moves the introduction of the ARGV/ARGN variables up to immmediately follow
the introduction of the concept of variable argument functions, and explicitly
connects this concept to C varargs functions.
llvm-svn: 311113
This reverts commit r310425, thus reapplying r310335 with a fix for link
issue of the AArch64 unittests on Linux bots when BUILD_SHARED_LIBS is ON.
Original commit message:
[GlobalISel] Remove the GISelAccessor API.
Its sole purpose was to avoid spreading around ifdefs related to
building global-isel. Since r309990, GlobalISel is not optional anymore,
thus, we can get rid of this mechanism all together.
NFC.
----
The fix for the link issue consists in adding the GlobalISel library in
the list of dependencies for the AArch64 unittests. This dependency
comes from the use of AArch64Subtarget that needs to know how
to destruct the GISel related APIs when being detroyed.
Thanks to Bill Seurer and Ahmed Bougacha for helping me reproducing and
understand the problem.
llvm-svn: 310969
1. Correct description of the kernel initial state for FLAT_SCRATCH_INIT.
2. Add link to GFX9 architecture documentation.
3. Update product names.
4. Rename note record from NT_AMD_AMDGPU_METADATA to NT_AMD_AMDGPU_HSA_METADATA and move description to the AMDHSA coding convention section.
5. Minor typo corrections.
Differential Revision: https://reviews.llvm.org/D36549
llvm-svn: 310954
Summary:
Add the documentation for the new module flag behavior. The new
ModFlagBehavior is added in r303590.
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36557
llvm-svn: 310926
Summary:
This patch adds the -path-equivalence option (example: llvm-cov show -path-equivalence=/origin/path,/local/path) which maps the source code path from one machine to another when using `llvm-cov show`. This is similar to the -filename-equivalence option, but doesn't require you to specify all the source files on the command line.
This allows you to generate the coverage data on one machine (e.g. in a CI system), and then use llvm-cov on another machine where you have the same code base on a different path.
Reviewers: vsk
Reviewed By: vsk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36391
llvm-svn: 310827
This make it consistent with STATISTIC which it will often appears near.
While there move one DEBUG_COUNTER instance out of an anonymous namespace. It's already declaring a static variable so the namespace is unnecessary.
llvm-svn: 310637
This reverts commit r310115.
It causes a linker failure for the one of the unittests of AArch64 on one
of the linux bot:
http://lab.llvm.org:8011/builders/clang-ppc64le-linux-multistage/builds/3429
: && /home/fedora/gcc/install/gcc-7.1.0/bin/g++ -fPIC
-fvisibility-inlines-hidden -Werror=date-time -std=c++11 -Wall -W
-Wno-unused-parameter -Wwrite-strings -Wcast-qual
-Wno-missing-field-initializers -pedantic -Wno-long-long
-Wno-maybe-uninitialized -Wdelete-non-virtual-dtor -Wno-comment
-ffunction-sections -fdata-sections -O2
-L/home/fedora/gcc/install/gcc-7.1.0/lib64 -Wl,-allow-shlib-undefined
-Wl,-O3 -Wl,--gc-sections
unittests/Target/AArch64/CMakeFiles/AArch64Tests.dir/InstSizes.cpp.o -o
unittests/Target/AArch64/AArch64Tests
lib/libLLVMAArch64CodeGen.so.6.0.0svn lib/libLLVMAArch64Desc.so.6.0.0svn
lib/libLLVMAArch64Info.so.6.0.0svn lib/libLLVMCodeGen.so.6.0.0svn
lib/libLLVMCore.so.6.0.0svn lib/libLLVMMC.so.6.0.0svn
lib/libLLVMMIRParser.so.6.0.0svn lib/libLLVMSelectionDAG.so.6.0.0svn
lib/libLLVMTarget.so.6.0.0svn lib/libLLVMSupport.so.6.0.0svn -lpthread
lib/libgtest_main.so.6.0.0svn lib/libgtest.so.6.0.0svn -lpthread
-Wl,-rpath,/home/buildbots/ppc64le-clang-multistage-test/clang-ppc64le-multistage/stage1/lib
&& :
unittests/Target/AArch64/CMakeFiles/AArch64Tests.dir/InstSizes.cpp.o:(.toc+0x0):
undefined reference to `vtable for llvm::LegalizerInfo'
unittests/Target/AArch64/CMakeFiles/AArch64Tests.dir/InstSizes.cpp.o:(.toc+0x8):
undefined reference to `vtable for llvm::RegisterBankInfo'
The particularity of this bot is that it is built with
BUILD_SHARED_LIBS=ON
However, I was not able to reproduce the problem so far.
Reverting to unblock the bot.
llvm-svn: 310425
Its sole purpose was to avoid spreading around ifdefs related to
building global-isel. Since r309990, GlobalISel is not optional anymore,
thus, we can get rid of this mechanism all together.
NFC.
llvm-svn: 310115
This revision ports all libFuzzer tests apart from the unittest to LIT.
The advantages of doing so include:
- Tests being self-contained
- Much easier debugging of a single test
- No need for using a two-stage compilation
The unit-test is still compiled using CMake, but it does not need a
freshly built compiler.
NOTE: The previous two-stage bot configuration will NOT work, as in the
second stage build LLVM_USE_SANITIZER is set, which disables ASAN from
being built.
Thus bots will be reconfigured in the next few commits.
Differential Revision: https://reviews.llvm.org/D36295
llvm-svn: 310075
Summary:
Adding a new restructuredText file to document the trace format produced with
an FDR mode handler and read by llvm-xray toolset.
Fixed two problems in the documentation from differential review. One bad table
and a missing link in the toc.
Original commit was e97c5836a77db803fe53319c53f3bf8e8b26d2b7.
Reviewers: dberris, pelikan
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36041
llvm-svn: 309891
Summary:
Adding a new restructuredText file to document the trace format produced with
an FDR mode handler and read by llvm-xray toolset.
Reviewers: dberris, pelikan
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36041
llvm-svn: 309836
The coverage tool needs to know which slice to look at when it's handed
a universal binary. Some projects need to look at aggregate coverage
reports for a variety of slices in different binaries: this patch adds
support for these kinds of projects to llvm-cov.
rdar://problem/33579007
llvm-svn: 309747
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
Describe:
+ Exact tablegen command and how to get it
+ tablegen command debug option for subtarget generation
+ Use of schedcover.py on the debug output to determine coverage
Differential Revision: https://reviews.llvm.org/D35058
llvm-svn: 308476
objects to start at the same address
As discussed on the ML, there's consensus that this is what the implementations
do and it seems sensible.
llvm-svn: 308090
Debugging LIT scripts can be rather painful, as LIT directly does not
specify which line has failed.
Rather, FileCheck is expected to report the failing location, but it can
be often ambiguous if multiple commands are tested against the same
prefix. This change adds a -vv option, which echoes all output.
Then detecting the error becomes straightforward: last printed line is
the failing one.
Of course, it could be desired to try to get failing line number
directly from bash, but it involves excessive hacks on older bash
versions (cf.
https://stackoverflow.com/questions/24398691/how-to-get-the-real-line-number-of-a-failing-bash-command)
Differential Revision: https://reviews.llvm.org/D35330
llvm-svn: 307938
Summary: Continuing the work from https://reviews.llvm.org/D33240, this change introduces an element unordered-atomic memset intrinsic. This intrinsic is essentially memset with the implementation requirement that all stores used for the assignment are done with unordered-atomic stores of a given element size.
Reviewers: eli.friedman, reames, mkazantsev, skatkov
Reviewed By: reames
Subscribers: jfb, dschuff, sbc100, jgravelle-google, aheejin, efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D34885
llvm-svn: 307854
Summary: Continuing the work from https://reviews.llvm.org/D33240, this change introduces an element unordered-atomic memmove intrinsic. This intrinsic is essentially memmove with the implementation requirement that all loads/stores used for the copy are done with unordered-atomic loads/stores of a given element size.
Reviewers: eli.friedman, reames, mkazantsev, skatkov
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34884
llvm-svn: 307796
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
When an output directory is specified, llvm-cov spawns some threads to
speed up the process of writing out file reports. Add an option which
allows users to control how many threads llvm-cov uses.
A CommandGuide.rst update + test is included.
llvm-svn: 307609
r274441 introduced Chapter 10 of "Implementing a Language with LLVM" tutorial,
which caused all files in the tutorial to start using two digit numbering. But
many links were not changed and therefore appear to be broken. This patch
addresses described issue.
As a result, following command does not produce any output anymore:
$ grep -nR '<LangImpl[0-9].html>' ./docs/tutorial/
llvm-svn: 307525
This is especially useful when lit is invoked indirectly by the build
system, and additional arguments can not be easily specified.
Differential Revision: https://reviews.llvm.org/D35091
llvm-svn: 307339
Summary:
- Removed double indirection via command-line args (i.e. two `--`
options of `build_docker_image.sh`).
- Added a comment on how to build 2-stage clang install into the
`build_docker_image.sh`, it used to be only in the `docs/Docker.rst`.
Reviewers: klimek, mehdi_amini
Reviewed By: klimek
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35050
llvm-svn: 307256
Working with git on a branch I find it really annoying that committing
a change causes ninja to think that stuff needs to be rebuilt.
With this change at least nothing in llvm needs to be rebuild when
something is committed.
llvm-svn: 306858
Nico Weber