The test passing was dependent upon your source tree being checked out
in a directory with a long enough path, to cause the diagnostics to
wrap at the expected locations.
Use stdin instead, so that the error messages consistently use
<stdin> as the filename, and get wrapped consistently.
llvm-svn: 239009
In -fdelayed-template-parsing mode, templates that aren't used are not parsed
at all. For some diagnostic plugins, this is a problem since they want to
analyse the contents of the template function body. What has been suggested
on cfe-dev [1] is to explicitly parse interesting templates in
HandleTranslationUnit(); IWYU does this for example [2].
This is workable, but since the delayed parsing doesn't run below a call to
ParseTopLevelDecl(), no DestroyTemplateIdAnnotationsRAIIObj object is on the
stack to clean up TemplateIds that are created during parsing. To fix this,
let ~Parser() clean them up in delayed template parsing mode instead of
leaking (or asserting in +Assert builds).
(r219810, relanded in r220400, fixed the same problem in incremental processing
mode; the review thread of r219810 has a good discussion of the problem.)
To test this, give the PrintFunctionNames plugin a flag to force parsing
of a template and add a test that uses it in -fdelayed-template-parsing mode.
Without the Parser.cpp change, that test asserts.
1: http://lists.cs.uiuc.edu/pipermail/cfe-dev/2014-August/038415.html
2: https://code.google.com/p/include-what-you-use/source/detail?r=566
llvm-svn: 237531
Backslash followed by # in a filename should have both characters
escaped, if you do it the way GNU Make wants. GCC doesn't, so we do
it the way GCC does rather than the way GNU Make wants.
llvm-svn: 237304
Previously we were setting LangOptions::GNUInline (which controls whether we
use traditional GNU inline semantics) if the language did not have the C99
feature flag set. The trouble with this is that C++ family languages also
do not have that flag set, so we ended up setting this flag in C++ modes
(and working around it in a few places downstream by also checking CPlusPlus).
The fix is to check whether the C89 flag is set for the target language,
rather than whether the C99 flag is cleared. This also lets us remove most
CPlusPlus checks. We continue to test CPlusPlus when deciding whether to
pre-define the __GNUC_GNU_INLINE__ macro for consistency with GCC.
There is a change in semantics in two other places
where we weren't checking both CPlusPlus and GNUInline
(FunctionDecl::doesDeclarationForceExternallyVisibleDefinition and
FunctionDecl::isInlineDefinitionExternallyVisible), but this change seems to
put us back into line with GCC's semantics (test case: test/CodeGen/inline.c).
While at it, forbid -fgnu89-inline in C++ modes, as GCC doesn't support it,
it didn't have any effect before, and supporting it just makes things more
complicated.
Differential Revision: http://reviews.llvm.org/D9333
llvm-svn: 237299
When writing a dependency (.d) file, if space or # is immediately
preceded by one or more backslashes, escape the backslashes as well as
the space or # character. Otherwise leave backslash alone.
This straddles the fence between BSD Make (which does no escaping at
all, and does not support space or # in filespecs) and GNU Make (which
does support escaping, but will fall back to the filespec as-written
if the escaping doesn't match an existing file).
Differential Revision: http://reviews.llvm.org/D9208
llvm-svn: 237296
NMake is a Make-like builder that comes with Microsoft Visual Studio.
Jom (https://wiki.qt.io/Jom) is an NMake-compatible build tool.
Dependency files for NMake/Jom need to use double-quotes to wrap
filespecs containing special characters, instead of the backslash
escapes that GNU Make wants.
Adds the -MV option, which specifies to use double-quotes as needed
instead of backslash escapes when writing the dependency file.
Differential Revision: http://reviews.llvm.org/D9260
llvm-svn: 235903
Modules and Tooling tests in particular tend to want to change the cwd,
so we were missing test coverage in this area on Windows. It should now
be easier to write such portable tests.
llvm-svn: 231029
The test wants to provoke a failure when opening the output file.
Using chmod 0 on the output file does not work reliably on all
filesystems or when running the test as root.
Change the test to use a nonexistant directory instead.
Differential Revision: http://reviews.llvm.org/D7620
llvm-svn: 231009
Currently -fms-extensions controls this behavior, which doesn't make
much sense. It means we can't identify what is and isn't a system header
when compiling our own preprocessed output, because #line doesn't
represent this information.
If someone is feeding Clang's preprocessed output to another compiler,
they can use this flag.
Fixes PR20553.
Reviewers: rsmith
Differential Revision: http://reviews.llvm.org/D5217
llvm-svn: 230587
This is a necessary prerequisite for debugging with modules.
The .pcm files become containers that hold the serialized AST which allows
us to store debug information in the module file that can be shared by all
object files that were built importing the module.
This reapplies r230044 with a fixed configure+make build and updated
dependencies and testcase requirements. Over the last iteration this
version adds
- missing target requirements for testcases that specify an x86 triple,
- a missing clangCodeGen.a dependency to libClang.a in the make build.
rdar://problem/19104245
llvm-svn: 230423
Previously the test did not have a RUN: prefix for the clang command.
In addition it was leaving behind a tmp file with no permissions causing issues when
deleting the build directory on Windows.
Differential Revision: http://reviews.llvm.org/D7534
llvm-svn: 228919
Summary:
Now that the darwin-version tests in Driver and Frontend are
testing different parts of the version encoding instead of doing
duplicated work
Reviewers: rnk
Reviewed By: rnk
Subscribers: rnk, cfe-commits
Differential Revision: http://reviews.llvm.org/D7134
llvm-svn: 228159
If there are some non-ascii character in the input source code, the
column index might be smallar than the byte index. This will result
in two possible assertion failures. This CL fixes the computation of
the column index and byte index.
1. The assertion in startOfNextColumn() and startOfPreviousColumn()
should not be raised when the byte index is greater than the column
index since the non-ascii characters may use more than one bytes to
store a character in a column.
2. The length of the caret line should be equal to the number of columns
of source line, instead of the length of the source line. Otherwise,
the assertion in selectInterestingSourceRegion will be raised because
the removed columns plus the kept columns are not greater than the max
column, which means that we should not remove any column at all.
llvm-svn: 225442
-trigraphs is now an alias for -ftrigraphs. -fno-trigraphs makes it possible
to explicitly disable trigraphs, which couldn't be done before.
clang -std=c++11 -fno-trigraphs
now builds without GNU extensions, but with trigraphs disabled. Previously,
trigraphs were only disabled in GNU modes or with -std=c++1z.
Make the new -f flags the cc1 interface too. This requires changing -trigraphs
to -ftrigraphs in a few cc1 tests.
Related to PR21974.
llvm-svn: 224790
The default value of Opts.Trigraphs now no longer depends solely on the
language input kind, so move the code out of setLangDefaults(). Also make
sure that Opts.MSVCCompat is set before the Trigraph code runs.
Related to PR21974.
llvm-svn: 224719
Add a comment and a test to ~DiagnosticEngine about the ordering
requirements on the teardown of DiagnosticConsumer. This could also be
accomplished by rearranging the fields of ~DiagnosticEngine, but I felt
that this was a better, more explicit solution.
This fixes PR21911, an issue that occurred after the unique_ptr
migration in r222193.
llvm-svn: 224454
basic microarchitecture names, and add support (with tests) for parsing
all of the masic microarchitecture names for CPUs documented to be
accepted by GCC with -march. I didn't go back through the 32-bit-only
old microarchitectures, but this at least brings the recent architecture
names up to speed. This is essentially the follow-up to the LLVM commit
r223769 which did similar cleanups for the LLVM CPUs.
One particular benefit is that you can now use -march=westmere in Clang
and get the LLVM westmere processor which is a different ISA variant (!)
and so quite significant.
Much like with r223769, I would appreciate the Intel folks carefully
thinking about the macros defined, names used, etc for the atom chips
and newest primary x86 chips. The current patterns seem quite strange to
me, especially here in Clang.
Note that I haven't replicated the per-microarchitecture macro defines
provided by GCC. I'm really opposed to source code using these rather
than using ISA feature macros.
llvm-svn: 223776
Summary:
When using a profile, we used to require the use -gmlt so that we could
get access to the line locations. This is used to match line numbers in
the input profile to the line numbers in the function's IR.
But this is actually not necessary. The driver can provide source
location tracking without the emission of debug information. In these
cases, the annotation 'llvm.dbg.cu' is missing from the IR, but the
actual line location annotations are still present.
This patch tells the driver to only emit source location tracking
when -fprofile-sample-use is present in the command line.
Reviewers: echristo, dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5888
llvm-svn: 220383
According to the gcc docs, -include uses the current working directory
for the lookup instead of the main source file.
This patch gets rid of NormalizeIncludePath (which relied on an
implementation detail of FileManager / FileEntry for the include path
logic to work), and instead hands the correct lookup information down to
LookupFile.
This will allow us to change the FileEntry's behavior regarding its Name
caching.
llvm-svn: 215433
The previous encoding only allowed a single digit for the minor version
number. This changes it to use 2 digits for both the minor version and the
revision number.
llvm-svn: 215245
intent when we added remark support, but was never implemented in the general
case, because the first -R flags didn't need it. (-Rpass= had special handling
to accomodate its argument.)
-Rno-foo, -Reverything, and -Rno-everything can be used to turn off a remark,
or to turn on or off all remarks. Per discussion on cfe-commits, -Weverything
does not affect remarks, and -Reverything does not affect warnings or errors.
The only "real" -R flag we have right now is -Rmodule-build; that flag is
effectively renamed from -Wmodule-build to -Rmodule-build by this change.
-Wpass and -Wno-pass (and their friends) are also renamed to -Rpass and
-Rno-pass by this change; it's not completely clear whether we intended to have
a -Rpass (with no =pattern), but that is unchanged by this commit, other than
the flag name. The default pattern is effectively one which matches no passes.
In future, we may want to make the default pattern be .*, so that -Reverything
works for -Rpass properly.
llvm-svn: 215046
We've decided to make the core rewriter class and PP rewriters mandatory.
They're only a few hundred lines of code in total and not worth supporting as a
distinct build configuration, especially since doing so disables key compiler
features.
This reverts commit r213150.
Revert "clang/test: Introduce the feature "rewriter" for --enable-clang-rewriter."
This reverts commit r213148.
Revert "Move clang/test/Frontend/rewrite-*.c to clang/test/Frontend/Rewriter/"
This reverts commit r213146.
llvm-svn: 213159
We don't have a style guide for diagnostic messages, but convention strongly
favours the forms:
'attribute is not supported', 'unsupported attribute'
We generally avoid:
'attribute is unsupported', 'non-supported attribute'
llvm-svn: 212972
Allow diagnostic checks that originate in included files to be matched without necessarily determining the line number that the diagnostic occurs on. The new syntax replaces the line number with '*'. This extension is limited to diagnostics in included files and may be used where the include file is not part of the test-suite itself.
Expected uses are for diagnostics originating in system headers, or for users who use -verify in testing 3rd-party library code where the location of diagnostics in header files may change from revision to revision and their precise location is not important to the success of the test-case.
llvm-svn: 212735
At least this answers the question of whether .bc/.ll input processed by the
frontend produces identical output to the original compilation.
llvm-svn: 211853
Test that we can consume LLVM bitcode and additionally check that it produces
the same output as a direct compilation.
The feature is crashy and has gone untested until now, but we might as well
provide some coverage as long as it remains in tree.
Also test LL source input in the same way because the existing tests for that
don't look convincing.
llvm-svn: 211844
With LocTrackingOnly there's no longer a user-facing distinction so the NDEBUG
checks can go away. (Except maybe column info, but -verify only checks line
numbers anyway.)
Also add a RUN line to validate the traditional !LocTrackingOnly case.
llvm-svn: 211622
Summary:
This new debug emission kind supports emitting line location
information in all instructions, but stops code generation
from emitting debug info to the final output.
This mode is useful when the backend wants to track source
locations during code generation, but it does not want to
produce debug info. This is currently used by optimization
remarks (-Rpass, -Rpass-missed and -Rpass-analysis).
When one of the -Rpass flags is used, the front end will enable
location tracking, only if no other debug option is enabled.
To prevent debug information from being generated, a new debug
info kind LocTrackingOnly causes DIBuilder::createCompileUnit() to
not emit the llvm.dbg.cu annotation. This blocks final code generation
from generating debug info in the back end.
Depends on D4234.
Reviewers: echristo, dblaikie
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4235
llvm-svn: 211610
James Y Knight