MCContext already has many tasks, and separating CodeView out from it is
probably a good idea. The .cv_loc tracking was modelled on the DWARF
tracking which lived directly in MCContext.
Removes the inclusion of MCCodeView.h from MCContext.h, so now there are
only 10 build actions while I hack on CodeView support instead of 265.
llvm-svn: 279847
While these directives are mostly aliases for the existing integer
and float value directives, some of them like .dc.a have no direct
equivalents and are sometimes being used for convenience.
Differential Revision: https://reviews.llvm.org/D23810
llvm-svn: 279577
Remove all the dead code around ilist_*sentinel_traits. This is a
follow-up to gutting them as part of r279314 (originally r278974),
staged to prevent broken builds in sub-projects.
Uses were removed from clang in r279457 and lld in r279458.
llvm-svn: 279473
Assembler directives .dtprelword, .dtpreldword, .tprelword, and
.tpreldword generates relocations R_MIPS_TLS_DTPREL32, R_MIPS_TLS_DTPREL64,
R_MIPS_TLS_TPREL32, and R_MIPS_TLS_TPREL64 respectively.
The main motivation for this patch is to be able to write test cases
for checking correctness of the LLD linker's behaviour.
Differential Revision: https://reviews.llvm.org/D23669
llvm-svn: 279439
Summary:
If the backend does not define LLVM/DWARF register mappings, the associated
variables are undefined since the map initializer is called by auto-generated
TableGen routines. This patch initializes the pointers and sizes to nullptr
and zero, respectively, and checks that they are valid before searching
for a mapping.
Reviewers: grosbach, dschuff
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23458
llvm-svn: 278574
Summary:
They are now lexed as a single token on targets where
MCAsmInfo::HasMipsExpressions is true and then parsed in a similar way to
the '~' operator as part of MCExpr::parseExpression.
As a result:
* expressions and immediates no longer have different parsing rules. The
difference is now solely down to whether evaluateAsAbsolute() succeeds.
* %hi(%neg(%gp_rel(x))) are no longer parsed as a single operator and
decomposed into the three MipsMCExpr nodes. They are parsed directly as
three MipsMCExpr nodes.
* parseMemOperand no longer needs to eat all the surrounding parenthesis
to get at the outermost operator to make this work
* %hi(%neg(%gp_rel(x))) and %lo(%neg(%gp_rel(x))) are no longer the only
3-in-1 relocs that parse for N64. They're still the only combinations that
are permitted in relocatable expressions though. Fixing that should be a
later patch.
* We no longer need to list all the tokens that can occur as the first token of
an expression or immediate.
test/MC/Mips/expr1.s:
This change also prevents the incorrect lowering of %lo(2*4)+foo to
%lo(8+foo) which is not an equivalent expression (the difference is
whether foo is truncated to 16-bit or not) and the test has been
updated to account for the macro expansion the correct expression requires.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D23110
llvm-svn: 277988
Attempt 2: Retryign after Tsan.mman test fix.
Attempt 1: Recommitting after fixing test.
When parsing assembly where the line comment syntax is not hash, the
lexer cannot distinguish between hash's that start a hash line comment
and one that is part of an assembly statement and must be distinguished
during parsing. Previously, this was incompletely handled by not checking
for EndOfStatement at the end of statements and interpreting hash
prefixed statements as comments.
Change EndOfStatement Parsing to check for Hash comments and reintroduce
Hash statement parsing to catch previously handled cases.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23017
llvm-svn: 277501
Recommitting after fixing test.
When parsing assembly where the line comment syntax is not hash, the
lexer cannot distinguish between hash's that start a hash line comment
and one that is part of an assembly statement and must be distinguished
during parsing. Previously, this was incompletely handled by not checking
for EndOfStatement at the end of statements and interpreting hash
prefixed statements as comments.
Change EndOfStatement Parsing to check for Hash comments and reintroduce
Hash statement parsing to catch previously handled cases.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23017
llvm-svn: 277459
Summary:
When parsing assembly where the line comment syntax is not hash, the
lexer cannot distinguish between hash's that start a hash line comment
and one that is part of an assembly statement and must be distinguished
during parsing. Previously, this was incompletely handled by not checking
for EndOfStatement at the end of statements and interpreting hash
prefixed statements as comments.
Change EndOfStatement Parsing to check for Hash comments and reintroduce
Hash statement parsing to catch previously handled cases.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23017
llvm-svn: 277407
This option, compatible with gas's -mimplicit-it, controls the
generation/checking of implicit IT blocks in ARM/Thumb assembly.
This option allows two behaviours that were not possible before:
- When in ARM mode, emit a warning when assembling a conditional
instruction that is not in an IT block. This is enabled with
-mimplicit-it=never and -mimplicit-it=thumb.
- When in Thumb mode, automatically generate IT instructions when an
instruction with a condition code appears outside of an IT block. This
is enabled with -mimplicit-it=thumb and -mimplicit-it=always.
The default option is -mimplicit-it=arm, which matches the existing
behaviour (allow conditional ARM instructions outside IT blocks without
warning, and error if a conditional Thumb instruction is outside an IT
block).
The general strategy for generating IT blocks in Thumb mode is to keep a
small list of instructions which should be in the IT block, and only
emit them when we encounter something in the input which means we cannot
continue the block. This could be caused by:
- A non-predicable instruction
- An instruction with a condition not compatible with the IT block
- The IT block already contains 4 instructions
- A branch-like instruction (including ALU instructions with the PC as
the destination), which cannot appear in the middle of an IT block
- A label (branching into an IT block is not legal)
- A change of section, architecture, ISA, etc
- The end of the assembly file.
Some of these, such as change of section and end of file, are parsed
outside of the ARM asm parser, so I've added a new virtual function to
AsmParser to ensure any previously-parsed instructions have been
emitted. The ARM implementation of this flushes the currently pending IT
block.
We now have to try instruction matching up to 3 times, because we cannot
know if the current IT block is valid before matching, and instruction
matching changes depending on the IT block state (due to the 16-bit ALU
instructions, which set the flags iff not in an IT block). In the common
case of not having an open implicit IT block and the instruction being
matched not needing one, we still only have to run the matcher once.
I've removed the ITState.FirstCond variable, because it does not store
any information that isn't already represented by CurPosition. I've also
updated the comment on CurPosition to accurately describe it's meaning
(which this patch doesn't change).
Differential Revision: https://reviews.llvm.org/D22760
llvm-svn: 276747
Add parseToken and compatriot functions to stitch error checks in
straight linear code. As part of this fix some erronous handling of
directives where the EndOfStatement token either was not checked or
Lexed on termination.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22312
llvm-svn: 275795
For a fully inlined call chain like a -> b -> c -> d, we were emitting
line info for 'd' 3 separate times: once for d's actual InlineSite line
table, and twice for 'b' and 'c'. This is particularly inefficient when
all these functions are in different headers, because now we need to
encode the file change. Windbg was coping with our suboptimal output, so
this should not be noticeable from the debugger.
llvm-svn: 275502
Preserve assembly comments from input in output assembly and flags to
toggle property. This is on by default for inline assembly and off in
llvm-mc.
Parsed comments are emitted immediately before an EOL which generally
places them on the expected line.
Reviewers: rtrieu, dwmw2, rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20020
llvm-svn: 275058
Our assertions in WinCOFFStreamer had unexpected side effects resulting
in symbols getting unexpectedly marked as used.
This fixes PR28462.
llvm-svn: 274941
Group" sections while lowering. In particular, for ELF sections this is
useful for creating function-specific groups that get merged into the
same named section.
Also use const Twine& instead of StringRef for the getELF functions
while we're here.
Differential Revision: http://reviews.llvm.org/D21743
llvm-svn: 274336
The main issue here is that the "thumb" flag wasn't set for some of these
sections, making MSVC's link.exe fails to correctly relocate code
against the symbols inside these sections. link.exe could fail for
instance with the "fixup is not aligned for target 'XX'" error. If
linking doesn't fail, the relocation process goes wrong in the end and
invalid code is generated by the linker.
This patch adds Thumb/ARM information so that the right flags are set
on COFF/Windows.
Patch by Adrien Guinet.
llvm-svn: 273880
MCSymbol.h shouldn't pull in MCAssembler.h, just MCFragment.h.
MCLinkerOptimizationHint.h shouldn't need MCMachObjectWriter.h. The
rest is fixing the fallout.
llvm-svn: 273507
Recommiting after fixing non-atomic insert to front of SmallVector in
MCAsmLexer.h
Add explicit Comment Token in Assembly Lexing for future support for
outputting explicit comments from inline assembly. As part of this,
CPPHash Directives are now explicitly distinguished from Hash line
comments in Lexer.
Line comments are recorded as EndOfStatement tokens, not Comment tokens
to simplify compatibility with current TargetParsers. This slightly
complicates comment output.
This remove all lexing tasks out of the parser, does minor cleanup
to remove extraneous newlines Asm Output, and some improvements white
space handling.
Reviewers: rtrieu, dwmw2, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20009
llvm-svn: 273007
Add explicit Comment Token in Assembly Lexing for future support for
outputting explicit comments from inline assembly. As part of this,
CPPHash Directives are now explicitly distinguished from Hash line
comments in Lexer.
Line comments are recorded as EndOfStatement tokens, not Comment tokens
to simplify compatibility with current TargetParsers. This slightly
complicates comment output.
This remove all lexing tasks out of the parser, does minor cleanup
to remove extraneous newlines Asm Output, and some improvements white
space handling.
Reviewers: rtrieu, dwmw2, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20009
llvm-svn: 272953
Again, the Microsoft linker does not like empty substreams.
We still emit an empty string table if CodeView is enabled, but that
doesn't cause problems because it always contains at least one null
byte.
llvm-svn: 272183
The truncateToSize function already has assertion to check the
lower boundary for the number bytes, but it does not check the
upper boundary which could still lead to usage errors.
Differential Revision: http://reviews.llvm.org/D20755
llvm-svn: 271773
Do not issue lexing errors found during the parsing of macro body
definitions and parseIdentifier function in AsmParser. This changes the
Parser to not issue a lexing error when we reach an error, but rather
when it is consumed allowing us time to examine and recover from an
error.
As a result, of this, we stop issuing a both lexing error and a parsing
error in floating-literals test. Minor tweak to parseDirectiveRealValue
to favor more meaningful lexing error over less helpful parse error.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20535
llvm-svn: 271542
Adds the method MCStreamer::EmitBinaryData, which is usually an alias
for EmitBytes. In the MCAsmStreamer case, it is overridden to emit hex
dump output like this:
.byte 0x0e, 0x00, 0x08, 0x10
.byte 0x03, 0x00, 0x00, 0x00
.byte 0x00, 0x00, 0x00, 0x00
.byte 0x00, 0x10, 0x00, 0x00
Also, when verbose asm comments are enabled, this patch prints the dump
output for each comment before its record, like this:
# ArgList (0x1000) {
# TypeLeafKind: LF_ARGLIST (0x1201)
# NumArgs: 0
# Arguments [
# ]
# }
.byte 0x06, 0x00, 0x01, 0x12
.byte 0x00, 0x00, 0x00, 0x00
This should make debugging easier and testing more convenient.
Reviewers: aaboud
Subscribers: majnemer, zturner, amccarth, aaboud, llvm-commits
Differential Revision: http://reviews.llvm.org/D20711
llvm-svn: 271313
Rather than invoking emitFill with negative size, which may trigger
an undefined behavior, return immediately after emitting the warning.
Differential Revision: http://reviews.llvm.org/D20768
llvm-svn: 271107
Reid Kleckner