SUMMARY:
This patch implements ArchSpec::GetClangTargetCPU() that provides string representing current architecture as a target CPU.
This string is then passed to tools like clang so that they generate correct code for that target.
Reviewers: clayborg, zturner
Subscribers: mohit.bhakkad, sagar, jaydeep, lldb-commits
Differential Revision: http://reviews.llvm.org/D17022
llvm-svn: 261206
the xcode project file to catch switch statements that have a
case that falls through unintentionally.
Define LLVM_FALLTHROUGH to indicate instances where a case has code
and intends to fall through. This should be in llvm/Support/Compiler.h;
Peter Collingbourne originally checked in there (r237766), then
reverted (r237941) because he didn't have time to mark up all the
'case' statements that were intended to fall through. I put together
a patch to get this back in llvm http://reviews.llvm.org/D17063 but
it hasn't been approved in the past week. I added a new
lldb-private-defines.h to hold the definition for now.
Every place in lldb where there is a comment that the fall-through
is intentional, I added LLVM_FALLTHROUGH to silence the warning.
I haven't tried to identify whether the fallthrough is a bug or
not in the other places.
I haven't tried to add this to the cmake option build flags.
This warning will only work for clang.
This build cleanly (with some new warnings) on macosx with clang
under xcodebuild, but if this causes problems for people on other
configurations, I'll back it out.
llvm-svn: 260930
vendors & oses, especially on Apple, to handle the new environment
where we have more than macosx or ios (now we have watchos and tvos).
llvm-svn: 252264
* ArchSpec::MergeFrom() would erroneously promote an unspecified
unknown to a specified unknown when both the ArchSpec and the merged
in ArchSpec were both unspecified unknowns. This no longer happens,
which fixes issues with global module cache lookup in some
situations.
* Added ArchSpec::DumpTriple(Stream&) that now properly prints
unspecified unknowns as '*' and specified unknows as 'unknown'.
This makes it trivial to tell the difference between the two.
Converted printing code over ot using DumpTriple() rather than
building from scratch.
* Fixed up a couple places that were not guaranteeing that an
unspecified unknown was recorded as such.
llvm-svn: 250253
when they introduced android testsuite regressions. Pavel has run the
testsuite against the updated patch and it completes cleanly now.
The original commit message:
Fixing a subtle issue on Mac OS X systems with dSYMs (possibly
introduced by r235737 but I didn't look into it too closely).
A dSYM can have a per-UUID plist in it which tells lldb where
to find an executable binary for the dSYM (DBGSymbolRichExecutable)
- other information can be included in this plist, like how to
remap the source file paths from their build pathnames to their
long-term storage pathnames.
This per-UUID plist is a unusual; it is used probably exclusively
inside apple with our build system. It is not created by default
in normal dSYMs.
The problem was like this:
1. lldb wants to find an executable, given only a UUID
(this happens when lldb is doing cross-host debugging
and doesn't have a copy of the target system's binaries)
2. It eventually calls LocateMacOSXFilesUsingDebugSymbols
which does a spotlight search for the dSYM on the local
system, and failing that, tries the DBGShellCommands
command to find the dSYM.
3. It gets a dSYM. It reads the per-UUID plist in the dSYM.
The dSYM has a DBGSymbolRichExecutable kv pair pointing to
the binary on a network filesystem.
4. Using the binary on the network filesystem, lldb now goes
to find the dSYM.
5. It starts by looking for a dSYM next to the binary it found.
6. lldb is now reading the dSYM over a network filesystem,
ignoring the one it found on its local filesystem earlier.
Everything still *works* but it's much slower.
This would be a tricky one to write up in a testsuite case;
you really need the binary to not exist on the local system.
And LocateMacOSXFilesUsingDebugSymbols will only compile on
Mac OS X - even if I found a way to write up a test case, it
would not run anywhere but on a mac.
One change Greg wanted while I was touching this code was to
have LocateMacOSXFilesUsingDebugSymbols (which could be asked
to find a binary OR find a dSYM) to instead return a ModuleSpec
with the sum total of everything it could find. This
change of passing around a ModuleSpec instead of a FileSpec
was percolated up into ModuleList::GetSharedModule.
The changes to LocateMacOSXFilesUsingDebugSymbols look larger
than they really are - there's a lot of simple whitespace changes
in there.
I ran the testsuites on mac, no new regressions introduced
<rdar://problem/21993813>
llvm-svn: 249755
SUMMARY:
The patch detects MIPS application specific extensions (ASE) like micromips by reading
ELF header.e_flags and SHT_MIPS_ABIFLAGS section. MIPS triple does not contain ASE
information like micromips, mips16, DSP, MSA etc. These can be read from header.e_flags
or SHT_MIPS_ABIFLAGS section.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, lldb-commits
Differential Revision: http://reviews.llvm.org/D11133
llvm-svn: 242381
This patch:
- Allows mips32 cores to match with any mips32/mips64 cores.
- Allows mips32r2 cores to match with core only up-to mips32r2/mips64r2.
- Allows mips32r3 cores to match with core only up-to mips32r3/mips64r3.
- Allows mips32r5 cores to match with core only up-to mips32r3/mips64r5.
- Allows mips32r6 core to match with only mips32r6/mips64r6 or mips32/mips64.
Reviewers: emaste, jaydeep, clayborg
Subscribers: mohit.bhakkad, nitesh.jain, bhushan, lldb-commits
Differential Revision: http://reviews.llvm.org/D10921
llvm-svn: 242016
Setting the OSType in the ArchSpec triple is needed to correctly setup
up the register context plugin. ArchSpec::SetArchitecture, for Mach-O
only, sets the OSType. For ELF it was left to the ObjectFileELF to fill
in the missing OSType.
This change moves the ObjectFileELF logic into ArchSpec.
A new optional 'os' parameter has been added to SetArchitecture.
For ELF, this value is the from the ELF header.e_ident[EI_OSABI].
The default value is 0 or ELFOSABI_NONE.
The real work of determining the OSType was done by the ObjectFileELF
helper function GetOsFromOSABI. This logic has been moved
SetArchitecture.
GetOsFromOSABI has been commented as being deprectated. It is left in
to support asserts.
For ELF the vendor value returned from SetArchitecture should be
UnknownVendor. An unneeded resetting in ObjectFileELF has been removed
and replaced with an assert.
This fixes a problem reading a core file on FreeBSD/ARM because the spec
triple was arm-unknown-unknown.
Patch by Tom Rix.
Differential Revision: http://reviews.llvm.org/D9292
llvm-svn: 239148
Patch by Jaydeep Patil
Added MIPS32 and MIPS64 core revisions. This would be followed by register context and emulate-instruction for MIPS32.
DYLDRendezvous.cpp:
On Linux link map struct does not contain extra load offset field.
Reviewers: clayborg
Subscribers: bhushan, mohit.bhakkad, sagar, lldb-commits.
Differential Revision: http://reviews.llvm.org/D9190
llvm-svn: 235574
A char can have signed and unsigned encoding but previously lldb always
assumed it is signed. This CL adds a logic to detect the encoding of
'char' types based on the default encoding on the target architecture.
It fixes variable printing and expression evaluation on architectures
where 'char' is signed by default.
Differential revision: http://reviews.llvm.org/D8636
llvm-svn: 233682
Specifically, there were some functions for converting enums
to strings and a function for matching a string using a specific
matching algorithm. This moves those functions to more appropriate
headers in lldb/Utility and updates references to include the
new headers.
llvm-svn: 232673
When you create a target, it tries to look for the platform's list
of supported architectures for a match. The match it finds can
contain specific triples, like i386-pc-windows-msvc. Later, we
overwrite this value with the most generic triple that can apply
to any platform with COFF support, causing some of the fields of
the triple to get overwritten.
This patch changes the behavior to only merge in values from the COFF
triple if the fields of the matching triple were unknown/unspecified
to begin with.
This fixes load address resolution on Windows, since it enables the
DynamicLoaderWindows to be used instead of DynamicLoaderStatic.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D7120
llvm-svn: 226849
The issue with Thumb IT (if/then) instructions is the IT instruction preceeds up to four instructions that are made conditional. If a breakpoint is placed on one of the conditional instructions, the instruction either needs to match the thumb opcode size (2 or 4 bytes) or a BKPT instruction needs to be used as these are always unconditional (even in a IT instruction). If BKPT instructions are used, then we might end up stopping on an instruction that won't get executed. So if we do stop at a BKPT instruction, we need to continue if the condition is not true.
When using the BKPT isntructions are easy in that you don't need to detect the size of the breakpoint that needs to be used when setting a breakpoint even in a thumb IT instruction. The bad part is you will now always stop at the opcode location and let LLDB determine if it should auto-continue. If the BKPT instruction is used, the BKPT that is used for ARM code should be something that also triggers the BKPT instruction in Thumb in case you set a breakpoint in the middle of code and the code is actually Thumb code. A value of 0xE120BE70 will work since the lower 16 bits being 0xBE70 happens to be a Thumb BKPT instruction.
The alternative is to use trap or illegal instructions that the kernel will translate into breakpoint hits. On Mac this was 0xE7FFDEFE for ARM and 0xDEFE for Thumb. The darwin kernel currently doesn't recognize any 32 bit Thumb instruction as a instruction that will get turned into a breakpoint exception (EXC_BREAKPOINT), so we had to use the BKPT instruction on Mac. The linux kernel recognizes a 16 and a 32 bit instruction as valid thumb breakpoint opcodes. The benefit of using 16 or 32 bit instructions is you don't stop on opcodes in a IT block when the condition doesn't match.
To further complicate things, single stepping on ARM is often implemented by modifying the BCR/BVR registers and setting the processor to stop when the PC is not equal to the current value. This means single stepping is another way the ARM target can stop on instructions that won't get executed.
This patch does the following:
1 - Fix the internal debugserver for Apple to use the BKPT instruction for ARM and Thumb
2 - Fix LLDB to catch when we stop in the middle of a Thumb IT instruction and continue if we stop at an instruction that won't execute
3 - Fixes this in a way that will work for any target on any platform as long as it is ARM/Thumb
4 - Adds a patch for ignoring conditions that don't match when in ARM mode (see below)
This patch also provides the code that implements the same thing for ARM instructions, though it is disabled for now. The ARM patch will check the condition of the instruction in ARM mode and continue if the condition isn't true (and therefore the instruction would not be executed). Again, this is not enable, but the code for it has been added.
<rdar://problem/19145455>
llvm-svn: 223851
ObjectFileMachO. It's close but we seem to be missing some
of the memory region segments - not exactly sure how that's
happening. The register context writing into the LC_THREAD
load commands is working correctly though.
Slightly reordered the arm64 definitions in ArchSpec.cpp so
when we look for an arm64 core file definiton we're getting
a cpu subtype of CPU_ANY which we can't put in the mach
header of a core file. Make the first definition we find by
linear search have the currently correct '1' cpu subtype.
llvm-svn: 221743
Summary:
Ed Maste found some problems with the commit in D5988. Address most of these.
While here, also add floating point return handling. This doesn't handle
128-bit long double yet. Since I don't have any system that uses it, I don't
currently have plans to implement it.
Reviewers: emaste
Reviewed By: emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6049
llvm-svn: 220963
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
works, as do breakpoints, run and pause, display zeroth frame.
See
http://reviews.llvm.org/D5503
for a fuller description of the changes in this commit.
llvm-svn: 218596
Add entries to core_definitions and elf_arch_entries for
those variants. Select the subtype for the variant by parsing
the e_flags field of the elf header.
llvm-svn: 216541
i386, i486, i486sx, and i686 are all indistinguishable as far as
PE/COFF files are concerned. This patch adds support for all of
these architectures to PlatformWindows.
Differential Revision: http://reviews.llvm.org/D4658
llvm-svn: 214092
We now catch the issue with a static_assert() at compile time and use llvm::array_lengthof(g_core_definitions) as well.
<rdar://problem/17767541>
llvm-svn: 213778
See the following llvm change for details:
r213743 | tnorthover | 2014-07-23 05:32:47 -0700 (Wed, 23 Jul 2014) | 9 lines
AArch64: remove arm64 triple enumerator.
This change fixes build breaks on Linux and MacOSX lldb.
llvm-svn: 213755
This change comprises of additions and some minor changes in order that
"kalimba" is listed as a supported platform and that debugging any
kalimbas results in PlatformKalimba being associated with the target.
The changes are as follows:
* The PlatformKalimba implementation itself
* A tweak to ArchSpec
* .note parsing for Kalimba in ObjectFileELF.cpp
* Plugin registration
* Makefile additions
Change by Matthew Gardiner
Minor tweak for cmake and Xcode by Todd Fiala
Tested:
Ubuntu 14.04 x86_64, clang 3.5-built lldb, all tests pass.
MacOSX 10.9.4, Xcode 6.0 Beta 1-built lldb, all tests pass.
llvm-svn: 213158
Fixes include:
- Don't say that "<arch>-apple-ios" is compatible with "<arch>-apple-macosx"
- Fixed DynamicLoaderMacOSXDYLD so specify an architecture that was converted solely from a cputype and subtype, just specify the file + UUID.
- Fixed PlatformiOSSimulator::GetSupportedArchitectureAtIndex() so it returns the correct archs
- Fixed SymbolFileDWARFDebugMap to load .o files correctly by just specifying the architecture without the vendor and OS now that "<arch>-apple-ios" is not compatible with "<arch>-apple-macosx" so we can load .o files correctly for DWARF with debug map
- Fixed the coded in TargetList::CreateTarget() so it does the right thing with an underspecified triple where just the arch is specified.
llvm-svn: 212783
Replace adhoc inline implementation of llvm::array_lengthof in favour of the
implementation in LLVM. This is simply a cleanup change, no functional change
intended.
llvm-svn: 211868
Changes include:
- ObjectFileMachO can now determine if a binary is "*-apple-ios" or "*-apple-macosx" by checking the min OS and SDK load commands
- ArchSpec now says "<arch>-apple-macosx" is equivalent to "<arch>-apple-ios" since the simulator mixes and matches binaries (some from the system and most from the iOS SDK).
- Getting process inforamtion on MacOSX now correctly classifies iOS simulator processes so they have "*-apple-ios" architectures in the ProcessInstanceInfo
- PlatformiOSSimulator can now list iOS simulator processes correctly instead of showing nothing by using:
(lldb) platform select ios-simulator
(lldb) platform process list
- debugserver can now properly return "*-apple-ios" for the triple in the process info packets for iOS simulator executables
- GDBRemoteCommunicationClient now correctly passes along the triples it gets for process info by setting the OS in the llvm::Triple correctly
<rdar://problem/17060217>
llvm-svn: 209852
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
ArchSpec now contains an optional distribution_id, with getters and
setters. Host::GetArchitecture () sets it on non-Apple platforms using
Host::GetDistributionId (). The distribution_id is ignored during
ArchSpec comparisons.
The gdb remote qHostInfo message transmits it, if set, via the
distribution_id={id-value} key/value pair. Updated gdb remote docs to
reflect this change.
As before, GetDistributionId () returns nothing on non-Linux platforms
at this time. On Linux, it is returned only if the lsb_platform
command is installed (in /bin or /usr/bin), and only if the
distributor id key is returned by 'lsb_platform -i'. This id is
lowercased, and whitespace is replaced with underscores.
llvm-svn: 199539
Based on the POSIX x86_64 register context. This is sufficient for opening
a mips64 (big endian) core file. Subsequent changes will connect the
disassembler, dynamic loader support, ABI, etc.
Review: http://llvm-reviews.chandlerc.com/D1873
llvm-svn: 192335
Bhushan D. Attarde