Summary:
For some branches, GAS accepts an immediate instead of the 2nd register operand.
We only implement this for BNE and BEQ for now. Other branch instructions can be added later, if needed.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D9666
llvm-svn: 239396
Summary: I noticed an object file with `DW_OP_reg4 DW_OP_breg4 0` as a DWARF expression,
which I traced to a missing break (and `++I`) in this code snippet.
While I was at it, I also added support for a few other corner cases
along the same lines that I could think of.
Test Plan: Hand-crafted test case to exercises these cases is included.
Reviewers: echristo, dblaikie, aprantl
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10302
llvm-svn: 239380
The following code triggers a fatal error in the compiler instrumentation
of ASan on Darwin because we place the attribute into llvm.metadata section,
which does not have the proper MachO section name.
void foo() __attribute__((annotate("custom")));
void foo() {;}
This commit reorders the checks so that we skip everything in llvm.metadata
first. It also removes the hard failure in case the section name does not
parse. That check will be done lower in the compilation pipeline anyway.
(Reviewed in http://reviews.llvm.org/D9093.)
llvm-svn: 239379
Summary:
This cleans up most allocas NVPTXLowerKernelArgs emits for byval
parameters.
Test Plan: makes bug21465.ll more stronger to verify no redundant local load/store.
Reviewers: eliben, jholewinski
Reviewed By: eliben, jholewinski
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D10322
llvm-svn: 239368
We don't want to replace function A by Function B in one module and Function B
by Function A in another module.
If these functions are marked with linkonce_odr we would end up with a function
stub calling B in one module and a function stub calling A in another module. If
the linker decides to pick these two we will have two stubs calling each other.
rdar://21265586
llvm-svn: 239367
on a per-function basis.
Previously some of the passes were conditionally added to ARM's pass pipeline
based on the target machine's subtarget. This patch makes changes to add those
passes unconditionally and execute them conditonally based on the predicate
functor passed to the pass constructors. This enables running different sets of
passes for different functions in the module.
rdar://problem/20542263
Differential Revision: http://reviews.llvm.org/D8717
llvm-svn: 239325
While we have some code to transform specification like {ax} into
{eax}/{rax} if the operand type isn't 16bit, we should reject cases
where there is no sane way to do this, like the i128 type in the
example.
Related to rdar://21042280
Differential Revision: http://reviews.llvm.org/D10260
llvm-svn: 239309
This patch adds support for system register MMFR4_EL1 (memory model feature register) in the assembler.
This register provides information about the implemented memory model and memory management support.
llvm-svn: 239302
This patch adds R_MIPS_PC32 relocation for Mips64.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D10235
llvm-svn: 239301
Implemented DAG lowering for all these forms.
Added tests for DAG lowering and encoding.
Differential Revision: http://reviews.llvm.org/D10310
llvm-svn: 239300
For GEP instructions isDereferenceablePointer checks that all indices are constant and within bounds. Replace this index calculation logic to a call to accumulateConstantOffset. Separated from the http://reviews.llvm.org/D9791
Reviewed By: sanjoy
Differential Revision: http://reviews.llvm.org/D9874
llvm-svn: 239299
Summary:
We need to add a runtime memcheck for pair of accesses (x,y) where at least one of x and y
are writes.
Assuming we have w writes and r reads, currently this number is estimated as being
w* (w+r-1). This estimation will count (write,write) pairs twice and will overestimate
the number of checks required.
This change adds a getNumberOfChecks method to RuntimePointerCheck, which
will count the number of runtime checks needed (similar in implementation to
needsAnyChecking) and uses it to produce the correct number of runtime checks.
Test Plan:
llvm test suite
spec2k
spec2k6
Performance results: no changes observed (not surprising since the formula for 1 writer is basically the same, which would covers most cases - at least with the current check limit).
Reviewers: anemet
Reviewed By: anemet
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D10217
llvm-svn: 239295
Interleaved memory accesses are grouped and vectorized into vector load/store and shufflevector.
E.g. for (i = 0; i < N; i+=2) {
a = A[i]; // load of even element
b = A[i+1]; // load of odd element
... // operations on a, b, c, d
A[i] = c; // store of even element
A[i+1] = d; // store of odd element
}
The loads of even and odd elements are identified as an interleave load group, which will be transfered into vectorized IRs like:
%wide.vec = load <8 x i32>, <8 x i32>* %ptr
%vec.even = shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 0, i32 2, i32 4, i32 6>
%vec.odd = shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 1, i32 3, i32 5, i32 7>
The stores of even and odd elements are identified as an interleave store group, which will be transfered into vectorized IRs like:
%interleaved.vec = shufflevector <4 x i32> %vec.even, %vec.odd, <8 x i32> <i32 0, i32 4, i32 1, i32 5, i32 2, i32 6, i32 3, i32 7>
store <8 x i32> %interleaved.vec, <8 x i32>* %ptr
This optimization is currently disabled by defaut. To try it by adding '-enable-interleaved-mem-accesses=true'.
llvm-svn: 239291
Summary:
canUnrollCompletely takes `unsigned` values for `UnrolledCost` and
`RolledDynamicCost` but is passed in `uint64_t`s that are silently
truncated. Because of this, when `UnrolledSize` is a large integer
that has a small remainder with UINT32_MAX, LLVM tries to completely
unroll loops with high trip counts.
Reviewers: mzolotukhin, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10293
llvm-svn: 239218
CVP wants to analyze the condition operand of a select along an edge.
It succeeds in getting back a Constant but not a ConstantInt. Instead,
it gets a ConstantExpr. It then assumes that the Constant must be equal
to false because it isn't equal to true.
Instead, perform an additional comparison.
This fixes PR23752.
llvm-svn: 239217
If we have (select a, b, c), it is sometimes valid to simplify this to a
single select operand. However, doing so is only valid if the
computation doesn't inject poison into the computation.
It might be helpful to consider the following example:
(select (icmp ne %i, INT_MAX), (add nsw %i, 1), INT_MIN)
The select is equivalent to (add %i, 1) but not (add nsw %i, 1).
Self hosting on x86_64 revealed that this occurs very, very rarely so
bailing out is hopefully pretty reasonable.
llvm-svn: 239215
Linking the debug frame section is actually very easy as we just have to
patch the start address in the FDE header and then copy the rest of the
FDE without even looking at it. The only small complexity comes from the
handling of the CIEs that we should unique across object file. This is
also really easy by using a StringMap keyed on the raw contents of the
CIE.
llvm-svn: 239198
The main use of the YAML debug map format is for testing inside LLVM. If we have IR
files in the tests used to generate object files, then we obviously don't know the
addresses of the symbols inside the object files beforehand.
This change lets the YAML import lookup the addresses in the object files and rewrite
them. This will allow to have test that really don't need any binary input.
llvm-svn: 239189
This reverts commit r239141. This commit was an attempt to reintroduce
a previous patch that broke many self-hosting bots with clang timeouts,
but it still has slowdown issues, at least on ARM, increasing the
compilation time (stage 2, clang's) by 5x.
llvm-svn: 239175
For targets with a free fneg, this fold is always a net loss if it
ends up duplicating the multiply, so definitely avoid it.
This might be true for some targets without a free fneg too, but
I'll leave that for future investigation.
llvm-svn: 239167
The new naming is (to me) much easier to understand. Here is a summary
of the new state of the world:
- '*Threshold' is the threshold for full unrolling. It is measured
against the estimated unrolled cost as computed by getUserCost in TTI
(or CodeMetrics, etc). We will exceed this threshold when unrolling
loops where unrolling exposes a significant degree of simplification
of the logic within the loop.
- '*PercentDynamicCostSavedThreshold' is the percentage of the loop's
estimated dynamic execution cost which needs to be saved by unrolling
to apply a discount to the estimated unrolled cost.
- '*DynamicCostSavingsDiscount' is the discount applied to the estimated
unrolling cost when the dynamic savings are expected to be high.
When actually analyzing the loop, we now produce both an estimated
unrolled cost, and an estimated rolled cost. The rolled cost is notably
a dynamic estimate based on our analysis of the expected execution of
each iteration.
While we're still working to build up the infrastructure for making
these estimates, to me it is much more clear *how* to make them better
when they have reasonably descriptive names. For example, we may want to
apply estimated (from heuristics or profiles) dynamic execution weights
to the *dynamic* cost estimates. If we start doing that, we would also
need to track the static unrolled cost and the dynamic unrolled cost, as
only the latter could reasonably be weighted by profile information.
This patch is sadly not without functionality change for the new unroll
analysis logic. Buried in the heuristic management were several things
that surprised me. For example, we never subtracted the optimized
instruction count off when comparing against the unroll heursistics!
I don't know if this just got lost somewhere along the way or what, but
with the new accounting of things, this is much easier to keep track of
and we use the post-simplification cost estimate to compare to the
thresholds, and use the dynamic cost reduction ratio to select whether
we can exceed the baseline threshold.
The old values of these flags also don't necessarily make sense. My
impression is that none of these thresholds or discounts have been tuned
yet, and so they're just arbitrary placehold numbers. As such, I've not
bothered to adjust for the fact that this is now a discount and not
a tow-tier threshold model. We need to tune all these values once the
logic is ready to be enabled.
Differential Revision: http://reviews.llvm.org/D9966
llvm-svn: 239164
These are added mainly for the benefit of clang, but this also means that they
are now allowed in .fpu directives and we emit the correct .fpu directive when
single-precision-only is used.
Differential Revision: http://reviews.llvm.org/D10238
llvm-svn: 239151
Summary:
Only restoring AvailableFeatures is not enough and will lead to buggy behaviour.
For example, if we have a feature enabled and we ".set pop", the next time we try
to ".set" that feature nothing will happen because the "!(STI.getFeatureBits()[Feature])"
check will be false, because we didn't restore STI.FeatureBits.
In order to fix this, we need to make MipsAssemblerOptions remember the STI.FeatureBits
instead of the AvailableFeatures and then regenerate AvailableFeatures each time we ".set pop".
This is because, AFAIK, there is no way to convert from AvailableFeatures back to STI.FeatureBits,
but the reverse is possible by using ComputeAvailableFeatures(STI.FeatureBits).
I also moved the updating of AssemblerOptions inside the "if" statement in
setFeatureBits() and clearFeatureBits(), as there is no reason to update if
nothing changes.
Reviewers: dsanders, mkuper
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9156
llvm-svn: 239144
isInductionPHI wants to calculate the stride based on the pointee size.
However, this is not possible when the pointee is zero sized.
This fixes PR23763.
llvm-svn: 239143
Also, moved test cases from CodeGen/X86/fold-buildvector-bug.ll into
CodeGen/X86/buildvec-insertvec.ll and regenerated CHECK lines using
update_llc_test_checks.py.
llvm-svn: 239142
I don't have the IR which is causing the build bot breakage but I can
postulate as to why they are timing out:
1. SimplifyWithOpReplaced was stripping flags from the simplified value.
2. visitSelectInstWithICmp was overriding SimplifyWithOpReplaced because
it's simplification wasn't correct.
3. InstCombine would revisit the add instruction and note that it can
rederive the flags.
4. By modifying the value, we chose to revisit instructions which reuse
the value. One of the instructions is the original select, causing
LLVM to never reach fixpoint.
Instead, strip the flags only when we are sure we are going to perform
the simplification.
llvm-svn: 239141
We cleverly handle cases where computation done in one argument of a select
instruction is suitable for the other operand, thus obviating the need
of the select and the comparison. However, the other operand cannot
have flags.
This fixes PR23757.
llvm-svn: 239115
gc.statepoint intrinsics with a far immediate call target
were lowered incorrectly as pc-rel32 calls.
This change fixes the problem, and generates an indirect call
via a scratch register.
For example:
Intrinsic:
%safepoint_token = call i32 (i64, i32, void ()*, i32, i32, ...) @llvm.experimental.gc.statepoint.p0f_isVoidf(i64 0, i32 0, void ()* inttoptr (i64 140727162896504 to void ()*), i32 0, i32 0, i32 0, i32 0)
Old Incorrect Lowering:
callq 140727162896504
New Correct Lowering:
movabsq $140727162896504, %rax
callq *%rax
In lowerCallFromStatepoint(), the callee-target was modified and
represented as a "TargetConstant" node, rather than a "Constant" node.
Undoing this modification enabled LowerCall() to generate the
correct CALL instruction.
llvm-svn: 239114
Summary:
A small bit that I missed when I updated the X86 backend to account for
the Win64 calling convention on non-Windows. Now we don't use dead
non-volatile registers when emitting a Win64 indirect tail call on
non-Windows.
Should fix PR23710.
Test Plan: Added test for the correct behavior based on the case I posted to PR23710.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10258
llvm-svn: 239111
Report proper error code from MachOObjectFile constructor if we
can't parse another segment load command (we already return a proper
error if segment load command contents is suspicious).
llvm-svn: 239109
The big/small ordering here is based on signed values so SmallValue will
be INT_MIN and BigValue 0. This shouldn't be a problem but the code
assumed that BigValue always had more bits set than SmallValue.
We used to just miss the transformation, but a recent refactoring of
mine turned this into an assertion failure.
llvm-svn: 239105
Basic block selection involves checking successor BBs for PHI nodes
that depend on the current BB. In case such BBs are found, the value
being selected is a constant and such constant already exists in
current BB, it's value is reused.
This might lead to wrong locations in some situations, especially if
same constant value ends up being materialized twice in two different
ways, which discards that sharing and leaves us with wrong debug
location in the successor BB.
In code this involves the following sequence of calls:
SelectionDAGBuilder::HandlePHINodesInSuccessorBlocks ->
SelectionDAGBuilder::CopyValueToVirtualRegister ->
SelectionDAGBuilder::getNonRegisterValue
llvm-svn: 239089
Now that we can look at users, we can trivially do this: when we would
have otherwise disabled GlobalMerge (currently -O<3), we can just run
it for minsize functions, as it's usually a codesize win.
Differential Revision: http://reviews.llvm.org/D10054
llvm-svn: 239087
Fix the FIXME and remove this old as(1) compat option. It was useful for
bringup of the integrated assembler to diff object files, but now it's
just causing more relocations than strictly necessary to be generated.
rdar://21201804
llvm-svn: 239084
Summary:
With this patch, NVPTXLowerKernelArgs converts a kernel pointer argument to a
pointer in the global address space. This change, along with
NVPTXFavorNonGenericAddrSpaces, allows the NVPTX backend to emit ld.global.*
and st.global.* for accessing kernel pointer arguments.
Minor changes:
1. refactor: extract function convertToPointerInAddrSpace
2. fix a bug in the test case in bug21465.ll
Test Plan: lower-kernel-ptr-arg.ll
Reviewers: eliben, meheff, jholewinski
Reviewed By: jholewinski
Subscribers: wengxt, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D10154
llvm-svn: 239082
Summary:
Properly report the error in segment load commands from MachOObjectFile
constructor instead of crashing the program.
Adjust the test case accordingly.
Test Plan: regression test suite
Reviewers: rafael, filcab
Subscribers: llvm-commits
llvm-svn: 239081
Summary:
Currently all load commands are parsed in MachOObjectFile constructor.
If the next load command cannot be parsed, or if command size is too
small, properly report it through the error code and fail to construct
the object, instead of crashing the program.
Test Plan: regression test suite
Reviewers: rafael, filcab
Subscribers: llvm-commits
llvm-svn: 239080
Summary: Instead, properly report this error from MachOObjectFile constructor.
Test Plan: regression test suite
Reviewers: rafael
Subscribers: llvm-commits
llvm-svn: 239078
Summary:
-march=bpf -> host endian
-march=bpf_le -> little endian
-match=bpf_be -> big endian
Test Plan:
v1 was tested by IBM s390 guys and appears to be working there.
It bit rots too fast here.
Reviewers: chandlerc, tstellarAMD
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10177
llvm-svn: 239071
Method 'visitBUILD_VECTOR' in the DAGCombiner knows how to combine a
build_vector of a bunch of extract_vector_elt nodes and constant zero nodes
into a shuffle blend with a zero vector.
However, method 'visitBUILD_VECTOR' forgot that a floating point
build_vector may contain negative zero as well as positive zero.
Example:
define <2 x double> @example(<2 x double> %A) {
entry:
%0 = extractelement <2 x double> %A, i32 0
%1 = insertelement <2 x double> undef, double %0, i32 0
%2 = insertelement <2 x double> %1, double -0.0, i32 1
ret <2 x double> %2
}
Before this patch, llc (with -mattr=+sse4.1) wrongly generated
movq %xmm0, %xmm0 # xmm0 = xmm0[0],zero
So, the sign bit of the negative zero was effectively lost.
This patch fixes the problem by adding explicit checks for positive zero.
With this patch, llc produces the following code for the example above:
movhpd .LCPI0_0(%rip), %xmm0
where .LCPI0_0 referes to a 'double -0'.
llvm-svn: 239070
* If the input file is missing;
* If the type of input object file can't be recognized;
* If the object file can't be parsed correctly.
llvm-svn: 239065
Now that we sometimes know the address space, this can
theoretically do a better job.
This needs better test coverage, but this mostly depends on
first updating the loop optimizatiosn to provide the address
space.
llvm-svn: 239053
When checking (High - Low + 1).sle(BitWidth), BitWidth would be truncated
to the size of the left-hand side. In the case of this PR, the left-hand
side was i4, so BitWidth=64 got truncated to 0 and the assert failed.
llvm-svn: 239048
Section symbols exist as an optimization: instead of having multiple relocations
point to different symbols, many of them can point to a single section symbol.
When that optimization is unused, a section symbol is also unused and adds no
extra information to the object file.
This saves a bit of space on the object files and makes the output of
llvm-objdump -t easier to read and consequently some tests get quite a bit
simpler.
llvm-svn: 239045
If the compare in a select pattern has another use then it can't be removed, so we'd just
be creating repeated code if we created a min/max node.
Spotted by Matt Arsenault!
llvm-svn: 239037
We don't need to go through LSR to trigger this bug. Instead,
hand-craft a tricky GEP and get the constant folder to hack on it when
parsing the IR.
llvm-svn: 239017
The first try (r238051) to land this was reverted due to ExecutionEngine build failure;
that was hopefully addressed by r238788.
The second try (r238842) to land this was reverted due to BUILD_SHARED_LIBS failure;
that was hopefully addressed by r238953.
This patch adds a TargetRecip class for processing many recip codegen possibilities.
The class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other x86 CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
Differential Revision: http://reviews.llvm.org/D8982
llvm-svn: 239001
With a couple more constructors that GCC thinks are necessary.
Original commit message:
[dsymutil] Accept a YAML debug map as input instead of a binary.
To do this, the user needs to pass the new -y flag.
As it wasn't tested before, the debug map YAML deserialization was
completely buggy (mainly because the DebugMapObject has a dual
mapping that allows to search by name and by address, but only the
StringMap got populated). It's fixed and tested in this commit by
augmenting some test with a 2 stage dwarf link: a frist llvm-dsymutil
reads the debug map and pipes it in a second instance that does the
actual link without touching the initial binary.
llvm-svn: 238959
To do this, the user needs to pass the new -y flag.
As it wasn't tested before, the debug map YAML deserialization was
completely buggy (mainly because the DebugMapObject has a dual
mapping that allows to search by name and by address, but only the
StringMap got populated). It's fixed and tested in this commit by
augmenting some test with a 2 stage dwarf link: a frist llvm-dsymutil
reads the debug map and pipes it in a second instance that does the
actual link without touching the initial binary.
llvm-svn: 238941
As the serialized debug map is becoming a first class citizen, a way
to cleanly dump it is required. We used -parse-only combined with
-v for that purpose before, but it dumps a lot of unrelated debug
stuff. Dumping the debug map was the only use of the -parse-only flag
anyway, so replace it with a more useful option.
llvm-svn: 238940
The existing code would unnecessarily break LDRD/STRD apart with
non-adjacent registers, on thumb2 this is not necessary.
Ideally on thumb2 we shouldn't match for ldrd/strd pre-regalloc anymore
as there is not reason to set register hints anymore, changing that is
something for a future patch however.
Differential Revision: http://reviews.llvm.org/D9694
Recommiting after the revert in r238821, the buildbot still failed with
the patch removed so there seems to be another reason for the breakage.
llvm-svn: 238935
AVX-512: Implemented GETEXP instruction for KNL and SKX
Added rounding mode modifier for SQRTPS/PD
Added tests for encoding and intrinsics.
CR:
http://reviews.llvm.org/D9991
llvm-svn: 238923
The windows buildbot originally failed because the check expressions are
evaluated as 64-bit values, even for 32-bit symbols. Fixed this by comparing
bottom 32-bits of the expressions.
The host/target endian mismatch issue is that it's invalid to read/write target
values using a host pointer without taking care of endian differences between
the target and host. Most (if not all) instances of
reinterpret_cast<uint32_t*>() in the RuntimeDyld are examples of this bug.
This has been fixed for Mips using the endian aware read/write functions.
The original commits were:
r238838:
[mips] Add RuntimeDyld tests for currently supported O32 relocations.
Reviewers: petarj, vkalintiris
Reviewed By: vkalintiris
Subscribers: vkalintiris, llvm-commits
Differential Revision: http://reviews.llvm.org/D10126
r238844:
[mips][mcjit] Add support for R_MIPS_PC32.
Summary:
This allows us to resolve relocations for DW_EH_PE_pcrel TType encodings
in the exception handling LSDA.
Also fixed a nearby typo.
Reviewers: petarj, vkalintiris
Reviewed By: vkalintiris
Subscribers: vkalintiris, llvm-commits
Differential Revision: http://reviews.llvm.org/D10127
llvm-svn: 238915
The ELF spec is very clear:
-----------------------------------------------------------------------------
If the value is non-zero, it represents a string table index that gives the
symbol name. Otherwise, the symbol table entry has no name.
--------------------------------------------------------------------------
In particular, a st_name of 0 most certainly doesn't mean that the symbol has
the same name as the section.
llvm-svn: 238899
Source for the test:
@bloom = global <3 x i32> <i32 0, i32 1, i32 42>
Plus bit twiddling to set the vector numelts to 0 (in the bc file).
llvm-svn: 238894
Summary:
Once a gc.statepoint has been rewritten to relocate live references, the
SSA values represent physical pointers instead of logical references.
Logical dereferencability does not imply physical dereferencability and
after RewriteStatepointsForGC has run any attributes that imply
dereferencability of the logical references need to be stripped.
This current approach is conservative, and can be made more precise
later if needed. For starters, we need to strip dereferencable
attributes only from pointers that live in the GC address space.
Reviewers: reames, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10105
llvm-svn: 238883
Summary:
LLVM's MI level notion of invariant_load is different from LLVM's IR
level notion of invariant_load with respect to dereferenceability. The
IR notion of invariant_load only guarantees that all *non-faulting*
invariant loads result in the same value. The MI notion of invariant
load guarantees that the load can be legally moved to any location
within its containing function. The MI notion of invariant_load is
stronger than the IR notion of invariant_load -- an MI invariant_load is
an IR invariant_load + a guarantee that the location being loaded from
is dereferenceable throughout the function's lifetime.
Reviewers: hfinkel, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10075
llvm-svn: 238881
If the first character in a metadata attachment's name is a digit, it has
to be output using an escape sequence, otherwise it's not valid text IR.
Removed an over-zealous assert from LLVMContext which didn't allow this.
The rule should only apply to text IR. Actual names can have any sequence
of non-NUL bytes.
Also added some documentation on accepted names.
Bug found with AFL fuzz.
llvm-svn: 238867
Summary:
Following on from r209907 which made personality encodings indirect, do the
same for TType encodings. This fixes the case where a try/catch block needs
to generate references to, for example, std::exception in the
.gcc_except_table.
Previous attempts at committing this broke the buildbots due to bugs in IAS.
These bugs have now been fixed so trying again.
Reviewers: petarj
Reviewed By: petarj
Subscribers: srhines, joerg, tberghammer, llvm-commits
Differential Revision: http://reviews.llvm.org/D9669
llvm-svn: 238863
As a follow-up to r235955, actually support up to 65535 arguments in a
subprogram. r235955 missed assembly support, having only tested the new
limit via C++ unit tests. Code patch by Amjad Aboud.
llvm-svn: 238854
Summary:
This allows us to resolve relocations for DW_EH_PE_pcrel TType encodings
in the exception handling LSDA.
Also fixed a nearby typo.
Reviewers: petarj, vkalintiris
Reviewed By: vkalintiris
Subscribers: vkalintiris, llvm-commits
Differential Revision: http://reviews.llvm.org/D10127
llvm-svn: 238844
The first try (r238051) to land this was reverted due to bot failures
that were hopefully addressed by r238788.
This patch adds a TargetRecip class for processing many recip codegen possibilities.
The class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other x86 CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
Differential Revision: http://reviews.llvm.org/D8982
llvm-svn: 238842
Summary:
With this change we are able to realign the stack dynamically, whenever it
contains objects with alignment requirements that are larger than the
alignment specified from the given ABI.
We have to use the $fp register as the frame pointer when we perform
dynamic stack realignment. In complex stack frames, with variably-sized
objects, we reserve additionally the callee-saved register $s7 as the
base pointer in order to reference locals.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8633
llvm-svn: 238829
This reverts commit r238795, as it broke the Thumb2 self-hosting buildbot.
Since self-hosting issues with Clang are hard to investigate, I'm taking the
liberty to revert now, so we can investigate it offline.
llvm-svn: 238821
Summary:
Make mips-expansions.s more readable by grouping the instructions with their respective CHECK's.
This test is going to get a lot bigger soon and it will become essentially unreadable if the current formatting is kept.
I've also made the comments more useful and accurate, and I've restricted the RUN lines to under 80 columns.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10089
llvm-svn: 238817
Summary: These directives are used to set the current value of the SoftFloat feature.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, mpf
Differential Revision: http://reviews.llvm.org/D9074
llvm-svn: 238813
The existing code would unnecessarily break LDRD/STRD apart with
non-adjacent registers, on thumb2 this is not necessary.
Ideally on thumb2 we shouldn't match for ldrd/strd pre-regalloc anymore
as there is not reason to set register hints anymore, changing that is
something for a future patch however.
Differential Revision: http://reviews.llvm.org/D9694
llvm-svn: 238795
Previously CCMP/FCCMP instructions were only used by the
AArch64ConditionalCompares pass for control flow. This patch uses them
for SELECT like instructions as well by matching patterns in ISelLowering.
PR20927, rdar://18326194
Differential Revision: http://reviews.llvm.org/D8232
llvm-svn: 238793
If a dead instruction we may not only have a last-use in the main live
range but also in a subregister range if subregisters are tracked. We
need to partially rebuild live ranges in both cases.
The testcase only broke when subregister liveness was enabled. I
commited it in the current form because there is currently no flag to
enable/disable subregister liveness.
This fixes PR23720.
llvm-svn: 238785
Doing so will allow us to also accept a YAML debug map in input as using
YAMLIO gives us the parsing for free. Being able to have textual debug
maps will in turn allow much more control over the tests, because 1/
no need to check-in a binary containing the debug map and 2/ it will allow
to use the same objects/IR files with made-up debug-maps to test
different scenari.
llvm-svn: 238781
Summary: Implement bswap intrinsic for MIPS FastISel. It's very different for misp32 r1/r2 .
Based on a patch by Reed Kotler.
Test Plan:
bswap1.ll
test-suite
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D7219
llvm-svn: 238760
Summary:
Implement the intrinsics memset, memcopy and memmove in MIPS FastISel.
Make some needed infrastructure fixes so that this can work.
Based on a patch by Reed Kotler.
Test Plan:
memtest1.ll
The patch passes test-suite for mips32 r1/r2 and at O0/O2
Reviewers: rkotler, dsanders
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D7158
llvm-svn: 238759
Summary: Implement the LLVM assembly urem/srem and sdiv/udiv instructions in MIPS FastISel.
Based on a patch by Reed Kotler.
Test Plan:
srem1.ll
div1.ll
test-suite at O0/O2 for mips32 r1/r2
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D7028
llvm-svn: 238757
Summary: Implement the LLVM IR select statement for MIPS FastISelsel.
Based on a patch by Reed Kotler.
Test Plan:
"Make check" test included now.
Passes test-suite at O2/O0 mips32 r1/r2.
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D6774
llvm-svn: 238756
Summary:
The contents of the HI/LO registers are unpredictable after the execution of
the MUL instruction. In addition to implicitly defining these registers in the
MUL instruction definition, we have to mark those registers as dead too.
Without this the fast register allocator is running out of registers when the
MUL instruction is followed by another one that tries to allocate the AC0
register.
Based on a patch by Reed Kotler.
Reviewers: dsanders, rkotler
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D9825
llvm-svn: 238755
Unreachable values may use themselves in strange ways due to their
dominance property. Attempting to translate through them can lead to
infinite recursion, crashing LLVM. Instead, claim that we weren't able
to translate the value.
This fixes PR23096.
llvm-svn: 238702
This fixes a bug in the line info handling in the dwarf code, based on a
problem I when implementing RelocVisitor support for MachO.
Since addr+size will give the first address past the end of the function,
we need to back up one line table entry. Fix this by looking up the
end_addr-1, which is the last address in the range. Note that this also
removes a duplicate output from the llvm-rtdyld line table dump. The
relevant line is the end_sequence one in the line table and has an offset
of the first address part the end of the range and hence should not be
included.
Also factor out the common functionality into a separate function.
This comes up on MachO much more than on ELF, since MachO
doesn't store the symbol size separately, hence making
said situation always occur.
Differential Revision: http://reviews.llvm.org/D9925
llvm-svn: 238699
The original version didn't properly account for the base register
being modified before the final jump, so caused miscompilations in
Chromium and LLVM. I've fixed this and tested with an LLVM self-host
(I don't have the means to build & test Chromium).
The general idea remains the same: in pathological cases jump tables
can be too far away from the instructions referencing them (like other
constants) so they need to be movable.
Should fix PR23627.
llvm-svn: 238680
This commit adds partial support for MachO relocations to RelocVisitor.
A simple test case is added to show that relocations are indeed being
applied and that using llvm-dwarfdump on MachO files no longer errors.
Correctness is not yet tested, due to an unrelated bug in DebugInfo,
which will be fixed with appropriate testcase in a followup commit.
Differential Revision: http://reviews.llvm.org/D8148
llvm-svn: 238663
best approach of each.
For vNi16, we use SHL + ADD + SRL pattern that seem easily the best.
For vNi32, we use the PUNPCK + PSADBW + PACKUSWB pattern. In some cases
there is a huge improvement with this in IACA's estimated throughput --
over 2x higher throughput!!!! -- but the measurements are too good to be
true. In one narrow case, the SHL + ADD + SHL + ADD + SRL pattern looks
slightly faster, but I'm not sure I believe any of the measurements at
this point. Both are the exact same uops though. Hard to be confident of
anything past that.
If anyone wants to collect very detailed (Agner-level) timings with the
result of this patch, or with the i32 case replaced with SHL + ADD + SHl
+ ADD + SRL, I'd be very interested. Note that you'll need to test it on
both Ivybridge and Haswell, with both SSE3, SSSE3, and AVX selected as
I saw unique behavior in each of these buckets with IACA all of which
should be checked against measured performance.
But this patch is still a useful improvement by dropping duplicate work
and getting the much nicer PSADBW lowering for v2i64.
I'd still like to rephrase this in terms of generic horizontal sum. It's
a bit lame to have a special case of that just for popcount.
llvm-svn: 238652
helper that skips creating a cast when it isn't necessary.
It's really somewhat concerning that this was caused by the the presence
of a no-op bitcast, but...
llvm-svn: 238642
shifting vectors of bytes as x86 doesn't have direct support for that.
This removes a bunch of redundant masking in the generated code for SSE2
and SSE3.
In order to avoid the really significant code size growth this would
have triggered, I also factored the completely repeatative logic for
shifting and masking into two lambdas which in turn makes all of this
much easier to read IMO.
llvm-svn: 238637
in-register LUT technique.
Summary:
A description of this technique can be found here:
http://wm.ite.pl/articles/sse-popcount.html
The core of the idea is to use an in-register lookup table and the
PSHUFB instruction to compute the population count for the low and high
nibbles of each byte, and then to use horizontal sums to aggregate these
into vector population counts with wider element types.
On x86 there is an instruction that will directly compute the horizontal
sum for the low 8 and high 8 bytes, giving vNi64 popcount very easily.
Various tricks are used to get vNi32 and vNi16 from the vNi8 that the
LUT computes.
The base implemantion of this, and most of the work, was done by Bruno
in a follow up to D6531. See Bruno's detailed post there for lots of
timing information about these changes.
I have extended Bruno's patch in the following ways:
0) I committed the new tests with baseline sequences so this shows
a diff, and regenerated the tests using the update scripts.
1) Bruno had noticed and mentioned in IRC a redundant mask that
I removed.
2) I introduced a particular optimization for the i32 vector cases where
we use PSHL + PSADBW to compute the the low i32 popcounts, and PSHUFD
+ PSADBW to compute doubled high i32 popcounts. This takes advantage
of the fact that to line up the high i32 popcounts we have to shift
them anyways, and we can shift them by one fewer bit to effectively
divide the count by two. While the PSHUFD based horizontal add is no
faster, it doesn't require registers or load traffic the way a mask
would, and provides more ILP as it happens on different ports with
high throughput.
3) I did some code cleanups throughout to simplify the implementation
logic.
4) I refactored it to continue to use the parallel bitmath lowering when
SSSE3 is not available to preserve the performance of that version on
SSE2 targets where it is still much better than scalarizing as we'll
still do a bitmath implementation of popcount even in scalar code
there.
With #1 and #2 above, I analyzed the result in IACA for sandybridge,
ivybridge, and haswell. In every case I measured, the throughput is the
same or better using the LUT lowering, even v2i64 and v4i64, and even
compared with using the native popcnt instruction! The latency of the
LUT lowering is often higher than the latency of the scalarized popcnt
instruction sequence, but I think those latency measurements are deeply
misleading. Keeping the operation fully in the vector unit and having
many chances for increased throughput seems much more likely to win.
With this, we can lower every integer vector popcount implementation
using the LUT strategy if we have SSSE3 or better (and thus have
PSHUFB). I've updated the operation lowering to reflect this. This also
fixes an issue where we were scalarizing horribly some AVX lowerings.
Finally, there are some remaining cleanups. There is duplication between
the two techniques in how they perform the horizontal sum once the byte
population count is computed. I'm going to factor and merge those two in
a separate follow-up commit.
Differential Revision: http://reviews.llvm.org/D10084
llvm-svn: 238636
a separate routine, generalize it to work for all the integer vector
sizes, and do general code cleanups.
This dramatically improves lowerings of byte and short element vector
popcount, but more importantly it will make the introduction of the
LUT-approach much cleaner.
The biggest cleanup I've done is to just force the legalizer to do the
bitcasting we need. We run these iteratively now and it makes the code
much simpler IMO. Other changes were minor, and mostly naming and
splitting things up in a way that makes it more clear what is going on.
The other significant change is to use a different final horizontal sum
approach. This is the same number of instructions as the old method, but
shifts left instead of right so that we can clear everything but the
final sum with a single shift right. This seems likely better than
a mask which will usually have to read the mask from memory. It is
certaily fewer u-ops. Also, this will be temporary. This and the LUT
approach share the need of horizontal adds to finish the computation,
and we have more clever approaches than this one that I'll switch over
to.
llvm-svn: 238635
It turns out that _except_handler3 and _except_handler4 really use the
same stack allocation layout, at least today. They just make different
choices about encoding the LSDA.
This is in preparation for lowering the llvm.eh.exceptioninfo().
llvm-svn: 238627
For some history here see the commit messages of r199797 and r169060.
The original intent was to fix cases like:
%EAX<def> = COPY %ECX<kill>, %RAX<imp-def>
%RCX<def> = COPY %RAX<kill>
where simply removing the copies would have RCX undefined as in terms of
machine operands only the ECX part of it is defined. The machine
verifier would complain about this so 169060 changed such COPY
instructions into KILL instructions so some super-register imp-defs
would be preserved. In r199797 it was finally decided to always do this
regardless of super-register defs.
But this is wrong, consider:
R1 = COPY R0
...
R0 = COPY R1
getting changed to:
R1 = KILL R0
...
R0 = KILL R1
It now looks like R0 dies at the first KILL and won't be alive until the
second KILL, while in reality R0 is alive and must not change in this
part of the program.
As this only happens after register allocation there is not much code
still performing liveness queries so the issue was not noticed. In fact
I didn't manage to create a testcase for this, without unrelated changes
I am working on at the moment.
The fix is simple: As of r223896 the MachineVerifier allows reads from
partially defined registers, so the whole transforming COPY->KILL thing
is not necessary anymore. This patch also changes a similar (but more
benign case as the def and src are the same register) case in the
VirtRegRewriter.
Differential Revision: http://reviews.llvm.org/D10117
llvm-svn: 238588
This patch corresponds to review:
http://reviews.llvm.org/D9941
It adds the various FMA instructions introduced in the version 2.07 of
the ISA along with the testing for them. These are operations on single
precision scalar values in VSX registers.
llvm-svn: 238578
This commit translates the line and column numbers for LLVM IR
errors from the numbers in the YAML block scalar to the numbers
in the MIR file so that the MIRParser users can report LLVM IR
errors with the correct line and column numbers.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10108
llvm-svn: 238576
Small (really small!) C++ exception handling examples work on 32-bit x86
now.
This change disables the use of .seh_* directives in WinException when
CFI is not in use. It also uses absolute symbol references in the tables
instead of imagerel32 relocations.
Also fixes a cache invalidation bug in MMI personality classification.
llvm-svn: 238575
Summary:
In continuation to an earlier commit to DependenceAnalysis.cpp by jingyue (r222100), the type for all subscripts in a coupled group need to be the same since constraints from one subscript may be propagated to another during testing. During testing, new SCEVs may be created and the operands for these need to be the same.
This patch extends unifySubscriptType() to work on lists of subscript pairs, ensuring a common extended type for all of them.
Test Plan:
Added a test case to NonCanonicalizedSubscript.ll which causes dependence analysis to crash without this fix.
All regression tests pass.
Reviewers: spop, sebpop, jingyue
Reviewed By: jingyue
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9698
llvm-svn: 238573
Fixes PR23455, where, when TableGen generates the matcher from the
AsmString, it splits "cmp${cc}ss" into tokens, and the "ss" suffix
is recognized as the SS register.
I can't think of a situation where that's a feature, not a bug, hence:
when a token is "isolated", i.e., it is followed and preceded by
separators, it shouldn't be parsed as a register.
Differential Revision: http://reviews.llvm.org/D9844
llvm-svn: 238536
organize them by the width of vector.
This makes it a lot easier to see that we're covering all of the vector
types but not doing so excessively. This also adds tests across the
spectrum of SSE versions in addition to the AVX versions.
If you're really tired of seeing the *massive* sprawl of scalarized code
for this, don't worry, I'm just about to land Bruno's patch that
dramatically improve the situation for SSSE3 and newer.
llvm-svn: 238520
This commit introduces a serializable structure called
'llvm::yaml::MachineFunction' that stores the machine
function's name. This structure will mirror the machine
function's state in the future.
This commit prints machine functions as YAML documents
containing a YAML mapping that stores the state of a machine
function. This commit also parses the YAML documents
that contain the machine functions.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9841
llvm-svn: 238519
This moves all the state numbering code for C++ EH to WinEHPrepare so
that we can call it from the X86 state numbering IR pass that runs
before isel.
Now we just call the same state numbering machinery and insert a bunch
of stores. It also populates MachineModuleInfo with information about
the current function.
llvm-svn: 238514
ELF has no restrictions on where undefined symbols go relative to other defined
symbols. In fact, gas just sorts them together. Do the same.
This was there since r111174 probably just because the MachO writer has it.
llvm-svn: 238513
The patch evaluates the expansion cost of exitValue in indVarSimplify pass, and only does the rewriting when the expansion cost is low or loop can be deleted with the rewriting. It provides an option "-replexitval=" to control the default aggressiveness of the exitvalue rewriting. It also fixes some missing cases in SCEVExpander::isHighCostExpansionHelper to enhance the evaluation of SCEV expansion cost.
Differential Revision: http://reviews.llvm.org/D9800
llvm-svn: 238507
For x86 targets, do not do sibling call optimization when materializing
the callee's address would require a GOT relocation. We can still do
tail calls to internal functions, hidden functions, and protected
functions, because they do not require this kind of relocation. It is
still possible to get GOT relocations when the user explicitly asks for
it with musttail or -tailcallopt, both of which are supposed to
guarantee TCO.
Based on a patch by Chih-hung Hsieh.
Reviewers: srhines, timmurray, danalbert, enh, void, nadav, rnk
Subscribers: joerg, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D9799
llvm-svn: 238487
It caused a smaller number of failures than the previous attempt at committing but still caused a couple on the llvm-linux-mips builder. Reverting while I investigate the remainder.
llvm-svn: 238483
Toma Tabacu