function because of a '1u' making it a 32-bit value
when it really needed to be a 64-bit value. Trivial to fix
once I figured out what was going on.
clang static analzyer fixit.
llvm-svn: 220022
Recognise the SHT_NOBITS property in kalimba ELF, and determine this to be
of type zerofilled. Subsequently recognise this type to represent bytes
on the target's DATA address space, and therefore be sized accordingly.
llvm-svn: 219782
in GetFullUnwindPlanForFrame() - the code was mostly checking
that we had an active Process and ABI but not always.
clang static analyzer fixit.
llvm-svn: 219772
This implements Host::LaunchProcess for windows, and in doing so
does some minor refactor to move towards a more modular process
launching design.
The original motivation for this is that launching processes on
windows needs some very windows specific code, which would live
most appropriately in source/Host/windows somewhere. However,
there is already some common code that all platforms use when
launching a process before delegating to the platform specific
stuff, which lives in source/Host/common/Host.cpp which would
be nice to reuse without duplicating.
This commonality has been abstracted into MonitoringProcessLauncher,
a class which abstracts out the notion of launching a process using
an arbitrary algorithm, and then monitoring it for state changes.
The windows specific launching code lives in ProcessLauncherWindows,
and the posix specific launching code lives in ProcessLauncherPosix.
When launching a process MonitoringProcessLauncher is created, and
then an appropriate delegate launcher is created and given to the
MonitoringProcessLauncher.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5781
llvm-svn: 219731
a FileSpec, UUID, and ArchSpec, and it's opening all the kexts
with the same bundle id to see if they're a match, don't set
the Arch in the ModuleSpec. If Module::GetObjectFile() sees
that the architecture of the kext is a mismatch for the arch
we're looking for, it'll spew a warning message to the dev (r217251).
Rely on the UUID match to get the correct file if we have
a UUID -- we'll get no warning if it's a mismatch.
<rdar://problem/18641477>
llvm-svn: 219728
based build since the subdirectories all appear to
have no inter-directory dependencies. This speeds
up parallel makefile builds greatly.
llvm-svn: 219660
With this change, both local-process llgs and remote-target llgs stdout/stderr
handling from inferior work correctly.
Several log lines have been added around PTY and stdout/stderr redirection
logic on the lldb client side.
Regarding remote llgs execution, see the following:
With these changes, remote llgs with $O now works properly:
$ lldb
(lldb) platform select remote-linux
(lldb) target create ~/some/inferior/exe
(lldb) gdb-remote {some-target}:{port}
(lldb) run
The sequence above will correctly redirect stdout/stderr over gdb-remote $O,
as is needed for remote debugging. That sequence assumes there is a lldb-gdbserver
exe running on the target with {some-host}:{port}.
You can replace the gdb-remote command with a '(lldb) platform connect
connect://{target-ip}:{target-port}'. If you do this and have a
lldb-platform running on the remote end, it will go ahead and launch
llgs for lldb for each target instance that is run/attached.
For local debugging with llgs, the following sequence also works, and
uses local PTYs instead to avoid $O and extra gdb-remote messages:
$ lldb
(lldb) settings set platform.plugin.linux.use-llgs true
(lldb) target create ~/some/inferior/exe
(lldb) run
The above will run the inferior using llgs on the local host, and
will use PTYs rather than $O redirection.
This change also removes the logging that happened after the fork but
before the exec when llgs is launching a new inferior process. Some
aspect of the file handling during that portion of code would not do
the right thing with log handling. We might want to go back later
and have that communicate over a pipe from the child to parent to pass
along any messages that previously were logged in that section of code.
llvm-svn: 219578
Reviewed at http://reviews.llvm.org/D5592
This patch gives LLDB some ability to interact with AddressSanitizer runtime library, on top of what we already have (historical memory stack traces provided by ASan). Namely, that's the ability to stop on an error caught by ASan, and access the report information that are associated with it. The report information is also exposed into SB API.
More precisely this patch...
adds a new plugin type, InstrumentationRuntime, which should serve as a generic superclass for other instrumentation runtime libraries, these plugins get notified when modules are loaded, so they get a chance to "activate" when a specific dynamic library is loaded
an instance of this plugin type, AddressSanitizerRuntime, which activates itself when it sees the ASan dynamic library or founds ASan statically linked in the executable
adds a collection of these plugins into the Process class
AddressSanitizerRuntime sets an internal breakpoint on __asan::AsanDie(), and when this breakpoint gets hit, it retrieves the report information from ASan
this breakpoint is then exposed as a new StopReason, eStopReasonInstrumentation, with a new StopInfo subclass, InstrumentationRuntimeStopInfo
the StopInfo superclass is extended with a m_extended_info field (it's a StructuredData::ObjectSP), that can hold arbitrary JSON-like data, which is the way the new plugin provides the report data
the "thread info" command now accepts a "-s" flag that prints out the JSON data of a stop reason (same way the "-j" flag works now)
SBThread has a new API, GetStopReasonExtendedInfoAsJSON, which dumps the JSON string into a SBStream
adds a test case for all of this
I plan to also get rid of the original ASan plugin (memory history stack traces) and use an instance of AddressSanitizerRuntime for that purpose.
Kuba
llvm-svn: 219546
output style can be customized. Change the built-in default to be
more similar to gdb's disassembly formatting.
The disassembly-format for a gdb-like output is
${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>:
The disassembly-format for the lldb style output is
{${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}:
The two backticks in the lldb style formatter triggers the sub-expression evaluation in
CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to
use ' characters instead of ` would work around that.
<rdar://problem/9885398>
llvm-svn: 219544
I don't think on any of the platforms where ObjC matters sizeof(T*) depends on T, so even if we never figured out the pointee type, the pointer type should still be sane
This might also allow some limited inspection where previously none was possible, so a win
llvm-svn: 219540
See http://reviews.llvm.org/D5695 for details.
This change does the following:
Enable lldb-gdbserver (llgs) usage for local-process Linux debugging.
To turn on local llgs debugging support, which is disabled by default, enable this setting:
(lldb) settings set platform.plugin.linux.use-llgs-for-local true
Adds a stream-based Dump() function to FileAction.
Pushes some platform methods that Linux (and FreeBSD) will want to share with MacOSX from PlatformDarwin into PlatformPOSIX.
Reviewed by Greg Clayton.
llvm-svn: 219457
Adds a test to verify that a thread resume request marks the thread as running
after doing the resume callback. This test fails without the corresponding
ThreadStateCoordinator.cpp change.
Fixes the code where that state was not maintained.
llvm-svn: 219412
This change adds some logging around dynamic loader handling.
It also fixes an issue where the dynamic loader entry breakpoint can end
up being re-inserted, showing the wrong (i.e. software breakpoint) instruction
at the stop location when a backtrace is displayed at program startup.
I discussed with Jim Ingham a few weeks back. Essentially the
one-hit breakpoints need to make it back to public state handling before
the software breakpoint gets cleared. The flow I was hitting was that
the breakpoint would get set, it would get hit, it would get cleared to
step over, then it would get reapplied, when we never wanted it reapplied.
Stops at the beginning of execution would then show backtraces with
software breakpoint instructions in it, erroneously. This change fixes it.
There might be a more elegant way to do this, or a flow change somewhere else
to avoid, but it does fix an issue I experienced in startup breakpoint handling.
llvm-svn: 219371
the backtrace, try falling back to the architecture default
unwind plan and see if we can backtrace a little further.
<rdar://problem/18556719>
llvm-svn: 219247
As part of getting ConnectionFileDescriptor working on Windows,
there is going to be alot of platform specific work to be done.
As a result, the implementation is moving into Host. This patch
performs the code move and fixes up call-sites appropriately.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5548
llvm-svn: 219143
Added tests and impl to make sure the following errors are reported:
* Notifying a created thread that we are already tracking.
* Notifying a thread death for a thread we don't know about.
llvm-svn: 218900
Now that ThreadStateCoordinator errors out on threads in unexpected states,
it has enough information to know which threads need stop requests fired
when we want to do a deferred callback on a thread's behalf. This change
adds a new method, CallAfterRunningThreadsStop(...), which no longer
takes a set of thread ids that require stop requests. It's much harder
to misuse this method and (with newer error logic) it's harder to
correctly use the original method. Expect the original method that takes
the set of thread ids to stop to disappear in the near future.
Adds several tests for CallAfterRunningThreadsStop().
llvm-svn: 218897
Added tests to verify that the coordinator signals an error if
the given thread to resume is unknown, and if the thread is through to
be running already.
Modified resume handling code to match tests.
llvm-svn: 218872
ThreadStateCoordinator changes:
* Most commands that run in the queue now take an error handler that
will be called with an error string if an error occurs during processing.
Errors generally stop the operation in progress. The errors are checked
at time of execution. This is intended to help flush out ptrace/waitpid/state management
issues as quickly as possible.
* Threads now must be known to the coordinator before stops can be reported,
resumes can be requested, thread deaths can be reported, or deferred stop
notifications can be made. Failure to know the thread will cause the coordinator
to call the error callback for the event being processed. Threads are introduced
to the system by the NotifyThreadCreate method.
* The NotifyThreadCreate method now takes the initial state of the thread being
introduces to the system. We no longer just assume the thread is running.
The test cases were cleaned up, too:
* A gtest test fixture is now used, which allows creating less verbose helper
methods that setup common pieces of callback code for some method invocations.
Net result: the tests are simpler to read and shorter to write.
llvm-svn: 218833
ThreadIDFunc => ThreadIDFunction
LogFunc => LogIDFunction
We try to avoid abbreviations/shortened names. Adjusted function parameter names
as well to replace _func with _function.
llvm-svn: 218773
r218568 added an explicit #include of the Linux ProcessMonitor.h to
POSIXThread.cpp, rather than including just "ProcessMonitor.h" and
relying on the build infrastructure for the appropriate paths.
For now add #ifdefs in the source to use the FreeBSD or Linux header
as appropriate; a cleaner fix (and perhaps some refactoring of the
POSIX classes) should still be done later.
llvm-svn: 218762
There is a state transition that seems potentially buggy that I am capturing and
logging here, and including an explicit test to demonstrate expected behavior. See new test
for detailed description. Added logging around this area since, if we hit it, we
may have a usage bug, or a new state transition we really need to investigate.
This is around this scenario:
Thread C deferred stop notification awaiting thread A and thread B to stop.
Thread A stops.
Thread A requests resume.
Thread B stops.
Here we will explicitly signal the deferred stop notification after thread B
stops even though thread A is now resumed. Copious logging happens here.
llvm-svn: 218683
the user level. It adds the ability to invent new stepping modes implemented by python classes,
and to view the current thread plan stack and to some extent alter it.
I haven't gotten to documentation or tests yet. But this should not cause any behavior changes
if you don't use it, so its safe to check it in now and work on it incrementally.
llvm-svn: 218642
The thread resume block is executed in the normal flow of thread
state queued event processing. The tests verify that it is executed
when we track the thread to be stopped and skipped when we track
it to already be running.
llvm-svn: 218638
Also added a test for the reset handling. The reset/state clearing happens
as a processed queue event. The only diff vs. standard processing is that
the exec clears the queue before queueing the activity to clear internal state.
i.e. once we get an exec, we really stop doing any other queue-based activity.
llvm-svn: 218629
works, as do breakpoints, run and pause, display zeroth frame.
See
http://reviews.llvm.org/D5503
for a fuller description of the changes in this commit.
llvm-svn: 218596
A new thread arriving while a pending signal notification
is outstanding will (1) add the new thread to the list of
stops expected before the deferred signal notification is
fired, (2) send a stop request for the new thread, and
(3) track the new thread as currently running.
llvm-svn: 218578
See http://reviews.llvm.org/D5495 for more details.
These are changes that are part of an effort to support building llgs, within the AOSP source tree, using the Android.mk
build system, when using the llvm/clang/lldb git repos from AOSP replaced with the experimental ones currently in
github.com/tfiala/aosp-{llvm,clang,lldb,compiler-rt}.
llvm-svn: 218568
Tested two pending stops before notification, where one of the pending stop
requirements was already known to be stopped.
Tested pending thread stop before notification, then reporting thread with
pending stop died and verifies pending notification is made.
llvm-svn: 218559
Enrico Granata