I ran into a situation where I wanted to print out the contents of
page 6 of a PDB as a binary blob, and there was no straightforward
way to do that.
In addition to adding that, this patch also adds the ability to dump
a stream by index as a binary blob, and it will stitch together all
the blocks and dump the whole thing as one seemingly contiguous
sequence of bytes.
llvm-svn: 281070
This writes the full sequence of type records described in
Yaml to the TPI stream of the PDB file.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D24316
llvm-svn: 281063
This can happen when the frontend knows the debug info will be emitted
somewhere else. Usually this happens for dynamic classes with out of
line constructors or key functions, but it can also happen when modules
are enabled.
llvm-svn: 281060
Fork off compatibility.ll for the 3.9 release. The *.bc file in this
commit was produced using a Release build of the release_39 branch.
llvm-svn: 281059
I was looking to fix a bug in getComplexity(), and these cases showed up as
obvious failures. I'm not sure how to find these in general though.
llvm-svn: 281055
Summary:
Prevously assembler parsed all literals as either 32-bit integers or 32-bit floating-point values. Because of this we couldn't support f64 literals.
E.g. in instruction "v_fract_f64 v[0:1], 0.5", literal 0.5 was encoded as 32-bit literal 0x3f000000, which is incorrect and will be interpreted as 3.0517578125E-5 instead of 0.5. Correct encoding is inline constant 240 (optimal) or 32-bit literal 0x3FE00000 at least.
With this change the way immediate literals are parsed is changed. All literals are always parsed as 64-bit values either integer or floating-point. Then we convert parsed literals to correct form based on information about type of operand parsed (was literal floating or binary) and type of expected instruction operands (is this f32/64 or b32/64 instruction).
Here are rules how we convert literals:
- We parsed fp literal:
- Instruction expects 64-bit operand:
- If parsed literal is inlinable (e.g. v_fract_f64_e32 v[0:1], 0.5)
- then we do nothing this literal
- Else if literal is not-inlinable but instruction requires to inline it (e.g. this is e64 encoding, v_fract_f64_e64 v[0:1], 1.5)
- report error
- Else literal is not-inlinable but we can encode it as additional 32-bit literal constant
- If instruction expect fp operand type (f64)
- Check if low 32 bits of literal are zeroes (e.g. v_fract_f64 v[0:1], 1.5)
- If so then do nothing
- Else (e.g. v_fract_f64 v[0:1], 3.1415)
- report warning that low 32 bits will be set to zeroes and precision will be lost
- set low 32 bits of literal to zeroes
- Instruction expects integer operand type (e.g. s_mov_b64_e32 s[0:1], 1.5)
- report error as it is unclear how to encode this literal
- Instruction expects 32-bit operand:
- Convert parsed 64 bit fp literal to 32 bit fp. Allow lose of precision but not overflow or underflow
- Is this literal inlinable and are we required to inline literal (e.g. v_trunc_f32_e64 v0, 0.5)
- do nothing
- Else report error
- Do nothing. We can encode any other 32-bit fp literal (e.g. v_trunc_f32 v0, 10000000.0)
- Parsed binary literal:
- Is this literal inlinable (e.g. v_trunc_f32_e32 v0, 35)
- do nothing
- Else, are we required to inline this literal (e.g. v_trunc_f32_e64 v0, 35)
- report error
- Else, literal is not-inlinable and we are not required to inline it
- Are high 32 bit of literal zeroes or same as sign bit (32 bit)
- do nothing (e.g. v_trunc_f32 v0, 0xdeadbeef)
- Else
- report error (e.g. v_trunc_f32 v0, 0x123456789abcdef0)
For this change it is required that we know operand types of instruction (are they f32/64 or b32/64). I added several new register operands (they extend previous register operands) and set operand types to corresponding types:
'''
enum OperandType {
OPERAND_REG_IMM32_INT,
OPERAND_REG_IMM32_FP,
OPERAND_REG_INLINE_C_INT,
OPERAND_REG_INLINE_C_FP,
}
'''
This is not working yet:
- Several tests are failing
- Problems with predicate methods for inline immediates
- LLVM generated assembler parts try to select e64 encoding before e32.
More changes are required for several AsmOperands.
Reviewers: vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, artem.tamazov
Differential Revision: https://reviews.llvm.org/D22922
llvm-svn: 281050
The CMPZ #0 disappears during peepholing, leaving just a tADDi3, tADDi8 or t2ADDri. This avoids having to materialize the expensive negative constant in Thumb-1, and allows a shrinking from a 32-bit CMN to a 16-bit ADDS in Thumb-2.
llvm-svn: 281040
These instructions were only necessary when type information was stored in the
MachineInstr (because only generic MachineInstrs possessed a type). Now that
it's in MachineRegisterInfo, COPY and PHI work fine.
llvm-svn: 281037
We want each register to have a canonical type, which means the best place to
store this is in MachineRegisterInfo rather than on every MachineInstr that
happens to use or define that register.
Most changes following from this are pretty simple (you need an MRI anyway if
you're going to be doing any transformations, so just check the type there).
But legalization doesn't really want to check redundant operands (when, for
example, a G_ADD only ever has one type) so I've made use of MCInstrDesc's
operand type field to encode these constraints and limit legalization's work.
As an added bonus, more validation is possible, both in MachineVerifier and
MachineIRBuilder (coming soon).
llvm-svn: 281035
Summary:
Also removed duplicate code from AMDGPUTargetAsmStreamer.
This change only change how amd_kernel_code_t is parsed and printed. No variable names are changed.
Reviewers: vpykhtin, tstellarAMD
Subscribers: arsenm, wdng, nhaehnle
Differential Revision: https://reviews.llvm.org/D24296
llvm-svn: 281028
This avoids us doing a completely unneeded "cmp r0, #0" after a flag-setting instruction if we only care about the Z or C flags.
Add LSL/LSR to the whitelist while we're here and add testing. This code could really do with a spring clean.
llvm-svn: 281027
As part of this effort, remove MipsFCmp nodes and use tablegen
patterns rather than custom lowering through C++.
Unexpectedly, this improves codesize for microMIPS as previous floating
point setcc expansions would materialize 0 and 1 into GPRs before using
the relevant mov[tf].[sd] instruction. Now $zero is used directly.
Reviewers: dsanders, vkalintiris, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D23118
llvm-svn: 281022
Summary:
If one of the uses of the value is a single edge PHINode, handle it.
Original:
%val = something
<suspend>
%p = PHINode [%val]
After Spill + Part13:
%val = something
%slot = gep val.spill.slot
store %val, %slot
<suspend>
%p = load %slot
Plus tiny fixes/changes:
* use correct index for coro.free in CoroCleanup
* fixup id parameter in coro.free to allow authoring coroutine in plain C with __builtins
Reviewers: majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24242
llvm-svn: 281020
llvm-cov writes out an index file in '-output-dir' mode, albeit not a
very informative one. Try to fix that by using the CoverageReport API to
include some basic summary information in the index file.
llvm-svn: 281011
This test should have broken after r280896. Fix up the test case
speculatively, since I don't have a way to test it.
I wonder why I didn't get any angry bot emails about this. Maybe none of
the win32 bots test llvm-cov? That could explain it, since the test says
it 'REQUIRES: system-windows', which is restricted to win32 hosts.
Also: why is 'system-windows' not defined for non-win32 Windows bots?
llvm-svn: 281008
This adds more tests for shuffles where the output width does not match
the input width and/or the output is generated from more than two inputs.
llvm-svn: 281005
The REX prefix should be used on indirect jmps, but not direct ones.
For direct jumps, the unwinder looks at the offset to determine if
it's inside the current function.
Differential Revision: https://reviews.llvm.org/D24359
llvm-svn: 281003
Summary: The hoisted instruction is executed speculatively. It could affect the debugging experience as user would see gdb go into code that may not be expected to execute. It will also affect sample profile accuracy by assigning incorrect frequency to source within then/else branch.
Reviewers: davidxl, dblaikie, chandlerc, kcc, echristo
Subscribers: mehdi_amini, probinson, eric_niebler, andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D24164
llvm-svn: 280995
The test case included in r280979 wasn't checking what it was supposed to be
checking for the predicated store case. Fixing the test revealed that the
multi-use case (when a pointer is used by both vectorized and scalarized memory
accesses) wasn't being handled properly. We can't skip over
non-consecutive-like pointers since they may have looked consecutive-like with
a different memory access.
llvm-svn: 280992
The text and html coverage views take different approaches to emitting
highlighted regions. That's because this problem is easier in the text
view: there's no need to worry about escaping text or adding tooltip
content to a highlighted snippet.
Unfortunately, the html view didn't get region highlighting quite right.
This patch fixes the situation, bringing parity between the two views.
llvm-svn: 280981
Previously, all consecutive pointers were marked uniform after vectorization.
However, if a consecutive pointer is used by a memory access that is eventually
scalarized, the pointer won't remain uniform after all. An example is
predicated stores. Even though a predicated store may be consecutive, it will
still be scalarized, making it's pointer operand non-uniform.
This patch updates the logic in collectLoopUniforms to consider the cases where
a memory access may be scalarized. If a memory access may be scalarized, its
pointer operand is not marked uniform. The determination of whether a given
memory instruction will be scalarized or not has been moved into a common
function that is used by the vectorizer, cost model, and legality analysis.
Differential Revision: https://reviews.llvm.org/D24271
llvm-svn: 280979
Fix the .arch asm parser to use the full set of features for the architecture
and any extensions on the command line. Add and update testcases accordingly
as well as add an extension that was used but not supported.
llvm-svn: 280971
And associated commits, as they broke the Thumb bots.
This reverts commit r280935.
This reverts commit r280891.
This reverts commit r280888.
llvm-svn: 280967
Summary:
This allows specifying instructions that are available only in specific assembler variant. If AsmVariantName is specified then instruction will be presented only in MatchTable for this variant. If not specified then assembler variants will be determined based on AsmString.
Also this allows splitting assembler match tables in same way as it is done in dissasembler.
Reviewers: ab, tstellarAMD, craig.topper, vpykhtin
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D24249
llvm-svn: 280952
Materializing something like "-3" can be done as 2 instructions:
MOV r0, #3
MVN r0, r0
This has a cost of 2, not 3. It looks like we were already trying to detect this pattern in TII::getIntImmCost(), but were taking the complement of the zero-extended value instead of the sign-extended value which is unlikely to ever produce a number < 256.
There were no tests failing after changing this... :/
llvm-svn: 280928
Add the ability to computeKnownBits and SimplifyDemandedBits to extract the known zero/one bits from BUILD_VECTOR, returning the known bits that are shared by every vector element.
This is an initial step towards determining the sign bits of a vector (PR29079).
Differential Revision: https://reviews.llvm.org/D24253
llvm-svn: 280927
This reverts commit r280808.
It is possible that this change results in an infinite loop. This
is causing timeouts in some tests on ARM, and a Chromebook bot is
failing.
llvm-svn: 280918
Zachary Turner