to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
https://reviews.llvm.org/D52803
This patch adds support to continuously CSE instructions during
each of the GISel passes. It consists of a GISelCSEInfo analysis pass
that can be used by the CSEMIRBuilder.
llvm-svn: 351283
If a copy was needed to handle the condition of brcond, it was being
inserted before the defining instruction. Add tests for iterator edge
cases.
I find the existing code here suspect for the case where it's looking
for terminators that modify the register. It's going to insert a copy
in the middle of the terminators, which isn't allowed (it might be
necessary to have a COPY_terminator if anybody actually needs this).
Also legalize brcond for AMDGPU.
llvm-svn: 350595
Add widen scalar for type index 1 (i1 condition) for G_SELECT.
Select G_SELECT for pointer, s32(integer) and smaller low level
types on MIPS32.
Differential Revision: https://reviews.llvm.org/D56001
llvm-svn: 350063
This adds support for widening G_FCEIL in LegalizerHelper and
AArch64LegalizerInfo. More specifically, it teaches the AArch64 legalizer to
widen G_FCEIL from a 16-bit float to a 32-bit float when the subtarget doesn't
support full FP 16.
This also updates AArch64/f16-instructions.ll to show that we perform the
correct transformation.
llvm-svn: 349927
This adds a G_FCEIL generic instruction and uses it in AArch64. This adds
selection for floating point ceil where it has a supported, dedicated
instruction. Other cases aren't handled here.
It updates the relevant gisel tests and adds a select-ceil test. It also adds a
check to arm64-vcvt.ll which ensures that we don't fall back when we run into
one of the relevant cases.
llvm-svn: 349664
Summary: This the initial code change to facilitate managing FMF flags from Instructions to MI wrt Intrinsics in Global Isel. Eventually the GlobalObserver interface will be added as well, where FMF additions can be tracked for the builder and CSE.
Reviewers: aditya_nandakumar, bogner
Reviewed By: bogner
Subscribers: rovka, kristof.beyls, javed.absar
Differential Revision: https://reviews.llvm.org/D55668
llvm-svn: 349514
Add support for s64 libcalls for G_SDIV, G_UDIV, G_SREM and G_UREM
and use integer type of correct size when creating arguments for
CLI.lowerCall.
Select G_SDIV, G_UDIV, G_SREM and G_UREM for types s8, s16, s32 and s64
on MIPS32.
Differential Revision: https://reviews.llvm.org/D55651
llvm-svn: 349499
Add narrowScalar for G_AND and G_XOR.
Legalize G_AND G_OR and G_XOR for types other then s32
with clampScalar on MIPS32.
Differential Revision: https://reviews.llvm.org/D55362
llvm-svn: 349475
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
Summary:
In addition to knowing that an instruction is changed. It's also useful to
know when it's about to change. For example, it might print the instruction so
you can track the changes in a debug log, it might remove it from some queue
while it's being worked on, or it might want to change several instructions as
a single transaction and act on all the changes at once.
Added changingInstr() to all existing uses of changedInstr()
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55623
llvm-svn: 348992
Summary:
There's little of interest that can be done to an already-erased instruction.
You can't inspect it, write it to a debug log, etc. It ought to be notification
that we're about to erase it. Rename the function to clarify the timing of the
event and reflect current usage.
Also fixed one case where we were trying to print an erased instruction.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55611
llvm-svn: 348976
https://reviews.llvm.org/D55516
Add the ability to pass in flags to buildInstr calls. Currently no
validation is performed but that can be easily performed based on the
opcode (if necessary).
Reviewed by: paquette.
llvm-svn: 348893
https://reviews.llvm.org/D55294
Previously MachineIRBuilder::buildInstr used to accept variadic
arguments for sources (which were either unsigned or
MachineInstrBuilder). While this worked well in common cases, it doesn't
allow us to build instructions that have multiple destinations.
Additionally passing in other optional parameters in the end (such as
flags) is not possible trivially. Also a trivial call such as
B.buildInstr(Opc, Reg1, Reg2, Reg3)
can be interpreted differently based on the opcode (2defs + 1 src for
unmerge vs 1 def + 2srcs).
This patch refactors the buildInstr to
buildInstr(Opc, ArrayRef<DstOps>, ArrayRef<SrcOps>)
where DstOps and SrcOps are typed unions that know how to add itself to
MachineInstrBuilder.
After this patch, most invocations would look like
B.buildInstr(Opc, {s32, DstReg}, {SrcRegs..., SrcMIBs..});
Now all the other calls (such as buildAdd, buildSub etc) forward to
buildInstr. It also makes it possible to build instructions with
multiple defs.
Additionally in a subsequent patch, we should make it possible to add
flags directly while building instructions.
Additionally, the main buildInstr method is now virtual and other
builders now only have to override buildInstr (for say constant
folding/cseing) is straightforward.
Also attached here (https://reviews.llvm.org/F7675680) is a clang-tidy
patch that should upgrade the API calls if necessary.
llvm-svn: 348815
This patch restricts the capability of G_MERGE_VALUES, and uses the new
G_BUILD_VECTOR and G_CONCAT_VECTORS opcodes instead in the appropriate places.
This patch also includes AArch64 support for selecting G_BUILD_VECTOR of <4 x s32>
and <2 x s64> vectors.
Differential Revisions: https://reviews.llvm.org/D53629
llvm-svn: 348788
Record the stack protector index in MachineFrameInfo when translating
Intrinsic::stackprotector similarly as is done by SelectionDAG when
processing the same intrinsic.
Setting this index allows the Prologue/Epilogue Insertion to recognize
that the stack protection is enabled. The pass can then make sure that
the stack protector comes before local variables on the stack and
assigns potentially vulnerable objects first so they are close to the
stack protector slot.
Differential Revision: https://reviews.llvm.org/D55418
llvm-svn: 348761
These opcodes are intended to subsume some of the capability of G_MERGE_VALUES,
as it was too powerful and thus complex to add deal with throughout the GISel
pipeline.
G_BUILD_VECTOR creates a vector value from a sequence of uniformly typed
scalar values. G_BUILD_VECTOR_TRUNC is a special opcode for handling scalar
operands which are larger than the destination vector element type, and
therefore does an implicit truncate.
G_CONCAT_VECTOR creates a vector by concatenating smaller, uniformly typed,
vectors together.
These will be used in a subsequent commit. This commit just adds the initial
infrastructure.
Differential Revision: https://reviews.llvm.org/D53594
llvm-svn: 348430
https://reviews.llvm.org/D54980
This provides a standard API across GISel passes to observe and notify
passes about changes (insertions/deletions/mutations) to MachineInstrs.
This patch also removes the recordInsertion method in MachineIRBuilder
and instead provides method to setObserver.
Reviewed by: vkeles.
llvm-svn: 348406
We can now select CLZ via the TableGen'erated code, so support G_CTLZ
and G_CTLZ_ZERO_UNDEF throughout the pipeline for types <= s32.
Legalizer:
If the CLZ instruction is available, use it for both G_CTLZ and
G_CTLZ_ZERO_UNDEF. Otherwise, use a libcall for G_CTLZ_ZERO_UNDEF and
lower G_CTLZ in terms of it.
In order to achieve this we need to add support to the LegalizerHelper
for the legalization of G_CTLZ_ZERO_UNDEF for s32 as a libcall (__clzsi2).
We also need to allow lowering of G_CTLZ in terms of G_CTLZ_ZERO_UNDEF
if that is supported as a libcall, as opposed to just if it is Legal or
Custom. Due to a minor refactoring of the helper function in charge of
this, we will also allow the same behaviour for G_CTTZ and G_CTPOP.
This is not going to be a problem in practice since we don't yet have
support for treating G_CTTZ and G_CTPOP as libcalls (not even in
DAGISel).
Reg bank select:
Map G_CTLZ to GPR. G_CTLZ_ZERO_UNDEF should not make it to this point.
Instruction select:
Nothing to do.
llvm-svn: 347545
The IEEE-754 Standard makes it clear that fneg(x) and
fsub(-0.0, x) are two different operations. The former is a bitwise
operation, while the latter is an arithmetic operation. This patch
creates a dedicated FNeg IR Instruction to model that behavior.
Differential Revision: https://reviews.llvm.org/D53877
llvm-svn: 346774
This adds the llvm-side support for post-inlining evaluation of the
__builtin_constant_p GCC intrinsic.
Also fixed SCCPSolver::visitCallSite to not blow up when seeing a call
to a function where canConstantFoldTo returns true, and one of the
arguments is a struct.
Updated from patch initially by Janusz Sobczak.
Differential Revision: https://reviews.llvm.org/D4276
llvm-svn: 346322
https://reviews.llvm.org/D53304
Currently dead phis are not cleaned up during DCE. This patch allows
dead PHI and G_PHI insts to be deleted.
Reviewed by: dsanders
llvm-svn: 344811
Port over the implementation in SelectionDAGBuilder.cpp into the IRTranslator
and update the arm64-irtranslator test.
These were causing fallbacks in CTMark/Bullet (-Rpass-missed=gisel-select),
and this patch fixes that.
https://reviews.llvm.org/D52945
llvm-svn: 343885
The simplest instance of this is an intrinsic with no results which will have the
intrinsic ID as operand 0.
Also fix some benign incorrectness when op0 is a reg but isn't a def that was
guarded against by checking for the extension opcodes.
llvm-svn: 343821
This brings the extending loads patch back to the original intent but minus the
PHI bug and with another small improvement to de-dupe truncates that are
inserted into the same block.
The truncates are sunk to their uses unless this would require inserting before a
phi in which case it sinks to the _beginning_ of the predecessor block for that
path (but no earlier than the def).
The reason for choosing the beginning of the predecessor is that it makes de-duping
multiple truncates in the same block simple, and optimized code is going to run a
scheduler at some point which will likely change the position anyway.
llvm-svn: 343804
This fixes a problem where the register allocator fails to eliminate a PHI
because there's a non-PHI in the middle of the PHI instructions at the start
of a BB.
This G_TRUNC can be better placed but this at least fixes the correctness issue
quickly. I'll follow up with a patch to the verifier to catch this kind of bug
in future.
llvm-svn: 343693
Matt Arsenault