Microsoft's documentation states that specifying
/Oy- after the /O[12x] options disables frame-pointer omission.
What it does *not* state is that it also disables frame-pointer omission
if /Oy- is specified before /O[12x].
llvm-svn: 258447
Use the helper function added in r258428.
The check should really be hoisted to the caller of all of these
optimize* functions, but that's another step.
llvm-svn: 258446
A lot of C code uses code like:
typedef struct
{
int a;
} FooType;
This creates debug info with an anonymous struct (a DW_TAG_structure_type with no DW_AT_name) and then a DW_TAG_typedef that points to the anonymous structure type. When a typedef is from a module and clang uses -gmodules and -fmodules, then we can end up trying to resolve an anonymous structure type in a DWO symbol file. This doesn't work very well when the structuture has no name, so we now check if a typedef comes from a module, and we directly resolve the typedef type in the module and copy it over. The version we copy from the module of course is correctly able to find the structure in the DWO symbol file, so this fixes the issues we run into.
<rdar://problem/24092915>
llvm-svn: 258443
The X86 musttail implementation finds register parameters to forward by
running the calling convention algorithm until a non-register location
is returned. However, assigning a vector memory location has the side
effect of increasing the function's stack alignment. We shouldn't
increase the stack alignment when we are only looking for register
parameters, so this change conditionalizes it.
llvm-svn: 258442
Summary:
Allow nowait clause on target directive in sema and add test cases.
Reviewers: ABataev
Differential Revision: http://reviews.llvm.org/D16358
llvm-svn: 258441
Better handling of the annoying pshuflw/pshufhw ops which only shuffle lower/upper halves of a vector.
Added vXi16 unary shuffle support for cases where i16 elements (from the same half of the source) are being splatted to the whole of one of the halves. This avoids the general lowering case which must shuffle the 32-bit elements first - meaning that we used to end up with unnecessary duplicate pshuflw/pshufhw shuffles.
Note this has the side effect of a lot of SSSE3 test cases no longer needing to use PSHUFB, as it falls below the 3 op combine threshold for when PSHUFB is typically worth it. I've raised PR26183 to discuss if the threshold should be changed and whether we need to make it more specific to the target CPU.
Differential Revision: http://reviews.llvm.org/D14901
llvm-svn: 258440
The original submittion triggered a BFD linker bug (2.24) on Aarch64 only. Before
the build bot is upgraded to more recent linker, restrict the test to be
executed only with gold linker.
llvm-svn: 258437
instead of using symlinks
Summary:
In the past I have run into several problems with the way
`test-release.sh` creates all the subproject directories as siblings,
and then uses symlinks to stitch them all together. In some scenarios
this leads to clang not being able to find header files, etc.
This patch changes the script so it directly exports into the correct
target locations for each subproject.
Reviewers: hans
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D16420
llvm-svn: 258436
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "(?,?)" or just "s" for bad section indexes. Also added a test to show
it prints the bad section index of "42" when printing the fields as raw hex.
llvm-svn: 258434
Starting with Windows 10, the Windows loader is itself multi-threaded,
meaning that the loader spins up a few threads to do process
initialization before it executes main. Windows delivers these
notifications asynchronously and they can come out of order, so
we can't be sure that the first thread we get a notification about
is actually the zero'th thread.
This patch fixes this by requesting the thread stopped at the
breakpoint that was specified, rather than getting thread 0 and
verifying that it is stopped at a breakpoint.
Differential Revision: http://reviews.llvm.org/D16247
llvm-svn: 258432
In this code, we avoid calling needsCopyRel in writeTo because
we called that function already in scanRelocs. Making the same
decision twice is a waste and has a risk of a bug that we get
inconsistent resuts.
llvm-svn: 258430
This fixes the `thread step-over` regression exposed by http://reviews.llvm.org/D16186 , which depends on the symbols having actual sizes. Nine tests on Windows had started failing as a result. They all work again with this fix.
Differential Revision: http://reviews.llvm.org/D16415
llvm-svn: 258429
This is similar to the bug/fix:
https://llvm.org/bugs/show_bug.cgi?id=26211http://reviews.llvm.org/rL258325
The fmin() test case reveals another bug caused by sloppy
code duplication. It will crash without this patch because
fp128 is a valid floating-point type, but we would think
that we had matched a function that used doubles.
The new helper function can be used to replace similar
checks that are used in several other places in this file.
llvm-svn: 258428
Many of the "unix" checkers are not actually unix-specific and would be valuable
to run on Windows. This commit explicitly enables those checkers on
Windows.
A patch by Alexander Riccio!
Differential Revision: http://reviews.llvm.org/D16245
llvm-svn: 258426
Summary:
Adds the following restriction in the OpenMP specifications.
OpenMP [2.10.1, Restrictions, p. 97]
At least one map clause must appear on the directive.
Reviewers: ABataev
Differential Revision: http://reviews.llvm.org/D16341
llvm-svn: 258425
Replace a string append operation in addFunctionMappingRecord with a
vector append. The existing behavior is quadratic in the worst case:
this patch makes it linear.
Differential Revision: http://reviews.llvm.org/D16395
llvm-svn: 258424
Include the needed headfile to fix the buildbot failure due to r258420 [PGO] Passmanagerbuilder change that enable IR level PGO instrumentation.
llvm-svn: 258423
This commit extends the patterns recognised by InstSimplify to also handle (x >> y) <= x in the same way as (x /u y) <= x.
The missing optimisation was found investigating why LLVM did not optimise away bound checks in a binary search: https://github.com/rust-lang/rust/pull/30917
Patch by Andrea Canciani!
Differential Revision: http://reviews.llvm.org/D16402
llvm-svn: 258422
This patch includes the passmanagerbuilder change that enables IR level PGO instrumentation. It adds two passmanagerbuilder options: -profile-generate=<profile_filename> and -profile-use=<profile_filename>. The new options are primarily for debug purpose.
Reviewers: davidxl, silvas
Differential Revision: http://reviews.llvm.org/D15828
llvm-svn: 258420
Summary:
And use it in PPCLoopDataPrefetch.cpp.
@hfinkel, please let me know if your preference would be to preserve the
ppc-loop-prefetch-cache-line option in order to be able to override the
value of TTI::getCacheLineSize for PPC.
Reviewers: hfinkel
Subscribers: hulx2000, mcrosier, mssimpso, hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D16306
llvm-svn: 258419
This patch adds the instrumentation for indirect call value profiling. It finds all the indirect call-sites and generates instrprof_value_profile intrinsic calls. A new opt level option -disable-vp is introduced to disable this instrumentation.
Reviewers: davidxl, betulb, vsk
Differential Revision: http://reviews.llvm.org/D16016
llvm-svn: 258417
Summary:
We already have the ability to collect the server logs when doing local debugging. This enables
the collection of remote logs as well. This relies on specifying a relative path "server.log" for
LLDB_DEBUGSERVER_LOG_FILE when starting remote platform. Since we always set the platform working
directory to a fresh folder to avoid conflicts, the actual file path will always be different and
we can pick the logs up from there.
Reviewers: tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D16322
llvm-svn: 258414
This undoes the change made in r258163. The assertion fails if `Ptr` is of a
vector type. The previous code doesn't look completely correct either, so I'll
investigate this more.
llvm-svn: 258411
Summary: This option is being added for testing purposes.
Reviewers: mcrosier
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D16410
llvm-svn: 258409
Do not emit profile arc files and note files for module and skeleton
CU's.
Our users report seeing unexpected *.gcda and *.gcno files in their
projects when using gcov-style profiling with modules or frameworks.
The unwanted files come from these modules. This is not very helpful
for end-users. Further, we've seen reports of instrumented programs
crashing while writing these files out (due to I/O failures).
rdar://problem/22838296
Reviewed-by: aprantl
Differential Revision: http://reviews.llvm.org/D15997
llvm-svn: 258406
This change attempts to produce vectorized integer expressions in bit widths
that are narrower than their scalar counterparts. The need for demotion arises
especially on architectures in which the small integer types (e.g., i8 and i16)
are not legal for scalar operations but can still be used in vectors. Like
similar work done within the loop vectorizer, we rely on InstCombine to perform
the actual type-shrinking. We use the DemandedBits analysis and
ComputeNumSignBits from ValueTracking to determine the minimum required bit
width of an expression.
Differential revision: http://reviews.llvm.org/D15815
llvm-svn: 258404
Summary:
This is now the same as the behaviour of the GNU assembler. This was done
as it is required in order to build the Linux kernel with the integrated
assembler enabled.
Reviewers: dsanders, vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13594
llvm-svn: 258400
Mike Aizatsky