Summary:
This function was named such because in the case of MachO files, the
mach header is located at this address. However all (most?) usages of
this function were not interested in that fact, but the fact that this
address is used as the base address for expressing various relative
addresses in the object file.
For other object file formats, this name is not appropriate (and it's
probably the reason why this function was not implemented in these
classes). In the ELF case the ELF header will usually end up at this
address, but this is a result of the linker optimizing the file layout
and not a requirement of the spec. For COFF files, I believe the is no
header located at this address either.
Reviewers: clayborg, jasonmolenda, amccarth, lemo, stella.stamenova
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D55422
llvm-svn: 348849
This re-commits r348592, which was reverted due to a failing test on
macos.
The issue was that I was passing a null pointer for the
"CreateMemoryInstance" callback when registering ObjectFileBreakpad,
which caused crashes when attemping to load modules from memory. The
correct thing to do is to pass a callback which always returns a null
pointer (as breakpad files are never loaded in inferior memory).
It turns out that there is only one test which exercises this code path,
and it's mac-only, so I've create a new test which should run everywhere
(except windows, as one cannot delete an executable which is being run).
Unfortunately, this test still fails on linux for other reasons, but at
least it gives us something to aim for.
The original commit message was:
This patch adds the scaffolding necessary for lldb to recognise symbol
files generated by breakpad. These (textual) files contain just enough
information to be able to produce a backtrace from a crash
dump. This information includes:
- UUID, architecture and name of the module
- line tables
- list of symbols
- unwind information
A minimal breakpad file could look like this:
MODULE Linux x86_64 0000000024B5D199F0F766FFFFFF5DC30 a.out
INFO CODE_ID 00000000B52499D1F0F766FFFFFF5DC3
FILE 0 /tmp/a.c
FUNC 1010 10 0 _start
1010 4 4 0
1014 5 5 0
1019 5 6 0
101e 2 7 0
PUBLIC 1010 0 _start
STACK CFI INIT 1010 10 .cfa: $rsp 8 + .ra: .cfa -8 + ^
STACK CFI 1011 $rbp: .cfa -16 + ^ .cfa: $rsp 16 +
STACK CFI 1014 .cfa: $rbp 16 +
Even though this data would normally be considered "symbol" information,
in the current lldb infrastructure it is assumed every SymbolFile object
is backed by an ObjectFile instance. So, in order to better interoperate
with the rest of the code (particularly symbol vendors).
In this patch I just parse the breakpad header, which is enough to
populate the UUID and architecture fields of the ObjectFile interface.
The rough plan for followup patches is to expose the individual parts of
the breakpad file as ObjectFile "sections", which can then be used by
other parts of the codebase (SymbolFileBreakpad ?) to vend the necessary
information.
Reviewers: clayborg, zturner, lemo, amccarth
Subscribers: mgorny, fedor.sergeev, markmentovai, lldb-commits
Differential Revision: https://reviews.llvm.org/D55214
llvm-svn: 348773
Summary:
This patch adds the scaffolding necessary for lldb to recognise symbol
files generated by breakpad. These (textual) files contain just enough
information to be able to produce a backtrace from a crash
dump. This information includes:
- UUID, architecture and name of the module
- line tables
- list of symbols
- unwind information
A minimal breakpad file could look like this:
MODULE Linux x86_64 0000000024B5D199F0F766FFFFFF5DC30 a.out
INFO CODE_ID 00000000B52499D1F0F766FFFFFF5DC3
FILE 0 /tmp/a.c
FUNC 1010 10 0 _start
1010 4 4 0
1014 5 5 0
1019 5 6 0
101e 2 7 0
PUBLIC 1010 0 _start
STACK CFI INIT 1010 10 .cfa: $rsp 8 + .ra: .cfa -8 + ^
STACK CFI 1011 $rbp: .cfa -16 + ^ .cfa: $rsp 16 +
STACK CFI 1014 .cfa: $rbp 16 +
Even though this data would normally be considered "symbol" information,
in the current lldb infrastructure it is assumed every SymbolFile object
is backed by an ObjectFile instance. So, in order to better interoperate
with the rest of the code (particularly symbol vendors).
In this patch I just parse the breakpad header, which is enough to
populate the UUID and architecture fields of the ObjectFile interface.
The rough plan for followup patches is to expose the individual parts of
the breakpad file as ObjectFile "sections", which can then be used by
other parts of the codebase (SymbolFileBreakpad ?) to vend the necessary
information.
Reviewers: clayborg, zturner, lemo, amccarth
Subscribers: mgorny, fedor.sergeev, markmentovai, lldb-commits
Differential Revision: https://reviews.llvm.org/D55214
llvm-svn: 348592
This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
Summary:
This patch fixes the next situation. On Windows clang-cl makes no stub before
the main function, so the main function is located exactly on module entry
point. May be it is the same on other platforms. So consider the following
sequence:
- set a breakpoint on main and stop there;
- try to evaluate expression, which requires a code execution on the debuggee
side. Such an execution always returns to the module entry, and the plan waits
for it there;
- the plan understands that it is complete now and removes its breakpoint. But
the breakpoint site is still there, because we also have a breakpoint on
entry;
- StopInfo analyzes a situation. It sees that we have stopped on the breakpoint
site, and it sees that the breakpoint site has owners, and no one logical
breakpoint is internal (because the plan is already completed and it have
removed its breakpoint);
- StopInfo thinks that it's a user breakpoint and skips it to avoid recursive
computations;
- the program continues.
So in this situation the program continues without a stop right after
the expression evaluation. To avoid this an additional check that
the plan was completed was added.
Reviewers: jingham, zturner, boris.ulasevich
Reviewed by: jingham
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53761
llvm-svn: 347974
This adds new APIs and a command to deal with exceptions (mostly Obj-C exceptions): SBThread and Thread get GetCurrentException API, which returns an SBValue/ValueObjectSP with the current exception for a thread. "Current" means an exception that is currently being thrown, caught or otherwise processed. In this patch, we only know about the exception when in objc_exception_throw, but subsequent patches will expand this (and add GetCurrentExceptionBacktrace, which will return an SBThread/ThreadSP containing a historical thread backtrace retrieved from the exception object. Currently unimplemented, subsequent patches will implement this).
Extracting the exception from objc_exception_throw is implemented by adding a frame recognizer.
This also add a new sub-command "thread exception", which prints the current exception.
Differential Revision: https://reviews.llvm.org/D43886
llvm-svn: 347813
When I landed the initial reproducer framework I knew there were some
things that needed improvement. Rather than bundling it with a patch
that adds more functionality I split it off into this patch. I also
think the API is stable enough to add unit testing, which is included in
this patch as well.
Other improvements include:
- Refactor how we initialize the loader and generator.
- Improve naming consistency: capture and replay seems the least ambiguous.
- Index providers by name and make sure there's only one of each.
- Add convenience methods for creating and accessing providers.
Differential revision: https://reviews.llvm.org/D54616
llvm-svn: 347716
When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`. However, there's no option to force LLDB to use hardware
breakpoints internally, for example while stepping.
This patch adds a setting target.require-hardware-breakpoint that forces
LLDB to always use hardware breakpoints. Because hardware breakpoints
are a limited resource and can fail to resolve, this patch also extends
error handling in thread plans, where breakpoints are used for stepping.
Differential revision: https://reviews.llvm.org/D54221
llvm-svn: 346920
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This patch removes the comments following the header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
Differential revision: https://reviews.llvm.org/D54385
llvm-svn: 346625
This moves construction of data buffers into the FileSystem class. Like
some of the previous refactorings we don't translate the path yet
because the functionality hasn't been landed in LLVM yet.
Differential revision: https://reviews.llvm.org/D54272
llvm-svn: 346598
Replace calls to LLVM's is_directory with calls to LLDB's FileSytem
class. For this I introduced a new convenience method that, like the
other methods, takes either a path or filespec. This still uses the LLVM
functions under the hood.
Differential revision: https://reviews.llvm.org/D54135
llvm-svn: 346375
In January Davide sent an e-mail to the mailing list to suggest removing
unmaintained language plugins such as Go and Java. The plan was to have
some cool down period to allow users to speak up, however after that the
plugins were never actually removed.
This patch removes the OCaml debugger plugin.
The plugin can be added again in the future if it is mature enough both
in terms of testing and maintenance commitment.
Discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013171.html
Differential revision: https://reviews.llvm.org/D54060
llvm-svn: 346159
In January Davide sent an e-mail to the mailing list to suggest removing
unmaintained language plugins such as Go and Java. The plan was to have
some cool down period to allow users to speak up, however after that the
plugins were never actually removed.
This patch removes the Java debugger plugin.
The plugin can be added again in the future if it is mature enough both
in terms of testing and maintenance commitment.
Discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013171.html
Differential revision: https://reviews.llvm.org/D54059
llvm-svn: 346158
In January Davide sent an e-mail to the mailing list to suggest removing
unmaintained language plugins such as Go and Java. The plan was to have
some cool down period to allow users to speak up, however after that the
plugins were never actually removed.
This patch removes the Go debugger plugin.
The plugin can be added again in the future if it is mature enough both
in terms of testing and maintenance commitment.
Discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013171.html
Differential revision: https://reviews.llvm.org/D54057
llvm-svn: 346157
This patch modifies how we open File instances in LLDB. Rather than
passing a path or FileSpec to the constructor, we now go through the
virtual file system. This is needed in order to make things work with
the VFS in the future.
Differential revision: https://reviews.llvm.org/D54020
llvm-svn: 346049
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
This patch removes the ResolveExecutableLocation method from FileSpec
and updates its uses with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53834
llvm-svn: 345853
This patch removes the GetPermissions and GetReadable methods from
FileSpec and updates its uses with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53831
llvm-svn: 345843
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345693
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345686
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345678
This is similar to D53597, but following up with 2 more enums.
After this, all flag enums should be strongly typed all the way
through to the symbol files plugins.
Differential Revision: https://reviews.llvm.org/D53616
llvm-svn: 345314
When we get the `resolve_scope` parameter from the SB API, it's a
`uint32_t`. We then pass it through all of LLDB this way, as a uint32.
This is unfortunate, because it means the user of an API never actually
knows what they're dealing with. We can call it something like
`resolve_scope` and have comments saying "this is a value from the
`SymbolContextItem` enumeration, but it makes more sense to just have it
actually *be* the correct type in the actual C++ type system to begin
with. This way the person reading the code just knows what it is.
The reason to use integers instead of enumerations for flags is because
when you do bitwise operations on enumerations they get promoted to
integers, so it makes it tedious to constantly be casting them back
to the enumeration types, so I've introduced a macro to make this
happen magically. By writing LLDB_MARK_AS_BITMASK_ENUM after defining
an enumeration, it will define overloaded operators so that the
returned type will be the original enum. This should address all
the mechanical issues surrounding using rich enum types directly.
This way, we get a better debugger experience, and new users to
the codebase can get more easily acquainted with the codebase because
their IDE features can help them understand what the types mean.
Differential Revision: https://reviews.llvm.org/D53597
llvm-svn: 345313
LC_BUILD_VERSION load command handling - this
commit is a combination of patches by Adrian
Prantl and myself. llvm::Triple::BridgeOS
isn't defined yet, so all references to that
are currently commented out.
Also update Xcode project file to build the
NativePDB etc plugins.
<rdar://problem/43353615>
llvm-svn: 344209
This patch teaches lldb to detect when there are missing frames in a
backtrace due to a sequence of tail calls, and to fill in the backtrace
with artificial tail call frames when this happens. This is only done
when the execution history can be determined from the call graph and
from the return PC addresses of calls on the stack. Ambiguous sequences
of tail calls (e.g anything involving tail calls and recursion) are
detected and ignored.
Depends on D49887.
Differential Revision: https://reviews.llvm.org/D50478
llvm-svn: 343900
Summary:
Add settings to control command echoing:
```
(lldb) settings set interpreter.echo-commands true
(lldb) settings set interpreter.echo-comment-commands true
```
Both settings default to true, which keeps LLDB's existing behavior in non-interactive mode (echo all command inputs to the output).
So far the only way to change this behavior was the `--source-quietly` flag, which disables all output including evaluation results.
Now `echo-commands` allows to turn off echoing for commands, while evaluation results are still printed. No effect if `--source-quietly` was present.
`echo-comment-commands` allows to turn off echoing for commands in case they are pure comment lines. No effect if `echo-commands` is false.
Note that the behavior does not change immediately! The new settings take effect only with the next command source.
LLDB lit test are the main motivation for this feature. So far incoming `#CHECK` line have always been echoed to the output and so they could never fail. Now we can disable it in lit-lldb-init.
Todos: Finish test for this feature. Add to lit-lldb-init. Check for failing lit tests.
Reviewers: aprantl, jasonmolenda, JDevlieghere
Subscribers: friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D52788
llvm-svn: 343859
This is an NFC commit to refactor the "load dependent files" parameter
from a boolean to an enum value. We want to be able to specify a
default, in which case we decide whether or not to load the dependent
files based on whether the target is an executable or not (i.e. a
dylib).
This is a dependency for D51934.
Differential revision: https://reviews.llvm.org/D51859
llvm-svn: 342633
This change allows you to write a new breakpoint type where the
logic for setting breakpoints is determined by a Python callback
written using the SB API's.
Differential Revision: https://reviews.llvm.org/D51830
llvm-svn: 342185
Summary:
This patch adds a framework for adding descriptions to the command completions we provide.
It also adds descriptions for completed top-level commands so that we can test this code.
Completions are in general supposed to be displayed alongside the completion itself. The descriptions
can be used to provide additional information about the completion to the user. Examples for descriptions
are function signatures when completing function calls in the expression command or the binary name
when providing completion for a symbol.
There is still some boilerplate code from the old completion API left in LLDB (mostly because the respective
APIs are reused for non-completion related purposes, so the CompletionRequest doesn't make sense to be
used), so that's why I still had to change some function signatures. Also, as the old API only passes around a
list of matches, and the descriptions are for these functions just another list, I had to add some code that
essentially just ensures that both lists are always the same side (e.g. all the manual calls to
`descriptions->AddString(X)` below a `matches->AddString(Y)` call).
The initial command descriptions that come with this patch are just reusing the existing
short help that is already added in LLDB.
An example completion with descriptions looks like this:
```
(lldb) pl
Available completions:
platform -- Commands to manage and create platforms.
plugin -- Commands for managing LLDB plugins.
```
Reviewers: #lldb, jingham
Reviewed By: #lldb, jingham
Subscribers: jingham, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D51175
llvm-svn: 342181
Summary:
Building LLDB with xcodebuild sets the compatibility version of liblldb
in LLDB.framework. Building the framework with cmake does not set the
compatibility version, and so it defaults to 0.0.0. This is a discrepency in the
difference between the xcode build and the cmake build.
I tested this change by building without this patch. From the build tree I ran
`otool -L Library/Frameworks/LLDB.framework/Versions/A/LLDB` and got this:
```
@rpath/LLDB.framework/Versions/A/LLDB (compatibility version 0.0.0, current version 8.0.0)
```
Did the same with this patch and the output contained this:
```
@rpath/LLDB.framework/Versions/A/LLDB (compatibility version 1.0.0, current version 8.0.0)
```
Reviewers: clayborg, labath
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D51959
llvm-svn: 342066
This patch extends the SBAPI to allow for setting a breakpoint not
only at a specific line, but also at a specific (minimum) column. When
a column is specified, it will try to find an exact match or the
closest match on the same line that comes after the specified
location.
Differential Revision: https://reviews.llvm.org/D51461
llvm-svn: 341078
Summary:
The new API appends an image search path to the
target's path mapping list.
Reviewers: aprantl, clayborg, labath
Reviewed By: aprantl
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D49739
llvm-svn: 339175
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary:
Previously, I thought that install-liblldb would fail because CMake had
a bug related to installing frameworks. In actuality, I misunderstood the
semantics of `add_custom_target`: the DEPENDS option refers to specific files,
not targets. Therefore `install-liblldb` should rely on the actual liblldb
getting generated rather than the target.
This means that the previous patch I committed (to stop relying on CMake's
framework support) is no longer needed and has been reverted. Using CMake's
framework support greatly simplifies the implementation.
`install-lldb-framework` (and the stripped variant) is as simple as
depending on `install-liblldb` because CMake knows that liblldb was built as a
framework and will install the whole framework for you. The stripped variant
will depend on the stripped variants of individual tools only to ensure they
actually are stripped as well.
Reviewers: labath, sas
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D50038
llvm-svn: 338594
This reverts r338154. This change is actually unnecessary, as the CMake
bug I referred to was actually not a bug but a misunderstanding of
CMake.
Original Differential Revision: https://reviews.llvm.org/D49888
llvm-svn: 338178
Summary:
Currently, if you build lldb-framework the entire framework doesn't
actually build. In order to build the entire framework, you need to actually
build lldb-suite. This abstraction doesn't feel quite right because
lldb-framework truly does depend on lldb-suite (liblldb + related tools).
In this change I want to invert their dependency. This will mean that lldb and
finish_swig will depend on lldb-framework in a framework build, and lldb-suite
otherwise. Instead of adding conditional logic everywhere to handle this, I
introduce LLDB_SUITE_TARGET to handle it.
Differential Revision: https://reviews.llvm.org/D49406
llvm-svn: 337311
Summary:
This patch adds the possibility to specify an exit code when calling quit.
We accept any int, even though it depends on the user what happens if the int is
out of the range of what the operating system supports as exit codes.
Fixes rdar://problem/38452312
Reviewers: davide, jingham, clayborg
Reviewed By: jingham
Subscribers: clayborg, jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D48659
llvm-svn: 336824
Pavel Labath