COFF section flags are not idempotent:
'rd' will make a read-write section because 'd' implies write
'dr' will make a read-only section because 'r' disables write
llvm-svn: 228490
If a loop predecessor has an invoke as its terminator, and the return value
from that invoke is used to determine the loop iteration space, then we can't
insert a computation based on that value in the loop predecessor prior to the
terminator (oops). If there's such an invoke, or just no predecessor for that
matter, insert a new loop preheader.
llvm-svn: 228488
Unfortunately, even with the workaround of disabling the linker TLS
optimizations in Clang restored (which has already been done), this still
breaks self-hosting on my P7 machine (-O3 -DNDEBUG -mcpu=native).
Bill is currently working on an alternate implementation to address the TLS
issue in a way that also fully elides the linker bug (which, unfortunately,
this approach did not fully), so I'm reverting this now.
llvm-svn: 228460
Doesn't seem necessary anymore. I think this was mostly compensating for
not enabling WQM for texture sampling instructions.
v2: Add test coverage
Reviewed-by: Tom Stellard <tom@stellard.net>
llvm-svn: 228373
If whole quad mode isn't enabled for these, the level of detail is
calculated incorrectly for pixels along diagonal triangle edges, causing
artifacts.
v2: Use a TSFlag instead of lots of switch cases
v3: Add test coverage
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88642
Reviewed-by: Tom Stellard <tom@stellard.net>
llvm-svn: 228372
Avoid the creation of select instructions which can result in different
scheduling of the selects.
I also added a bunch of additional store volatiles. Those avoid A
CodeGen problem (bug?) where normalizes and denomarlizing the control
moves all shift instructions into the first block where ISel can't match
them together with the cmps.
llvm-svn: 228362
PowerPC supports pre-increment load/store instructions (except for Altivec/VSX
vector load/stores). Using these on embedded cores can be very important, but
most loops are not naturally set up to use them. We can often change that,
however, by placing loops into a non-canonical form. Generically, this means
transforming loops like this:
for (int i = 0; i < n; ++i)
array[i] = c;
to look like this:
T *p = array[-1];
for (int i = 0; i < n; ++i)
*++p = c;
the key point is that addresses accessed are pulled into dedicated PHIs and
"pre-decremented" in the loop preheader. This allows the use of pre-increment
load/store instructions without loop peeling.
A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is
introduced to perform this transformation. I've used this code out-of-tree for
generating code for the PPC A2 for over a year. Somewhat to my surprise,
running the test suite + externals on a P7 with this transformation enabled
showed no performance regressions, and one speedup:
External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk
-2.32514% +/- 1.03736%
So I'm going to enable it on everything for now. I was surprised by this
because, on the POWER cores, these pre-increment load/store instructions are
cracked (and, thus, harder to schedule effectively). But seeing no regressions,
and feeling that it is generally easier to split instructions apart late than
it is to combine them late, this might be the better approach regardless.
In the future, we might want to integrate this functionality into LSR (but
currently LSR does not create new PHI nodes, so (for that and other reasons)
significant work would need to be done).
llvm-svn: 228328
PowerPC supports pre-increment floating-point load/store instructions, both r+r
and r+i, and we had patterns for them, but they were not marked as legal. Mark
them as legal (and add a test case).
llvm-svn: 228327
The combine that forms extloads used to be disabled on vector types,
because "None of the supported targets knows how to perform load and
sign extend on vectors in one instruction."
That's not entirely true, since at least SSE4.1 X86 knows how to do
those sextloads/zextloads (with PMOVS/ZX).
But there are several aspects to getting this right.
First, vector extloads are controlled by a profitability callback.
For instance, on ARM, several instructions have folded extload forms,
so it's not always beneficial to create an extload node (and trying to
match extloads is a whole 'nother can of worms).
The interesting optimization enables folding of s/zextloads to illegal
(splittable) vector types, expanding them into smaller legal extloads.
It's not ideal (it introduces some legalization-like behavior in the
combine) but it's better than the obvious alternative: form illegal
extloads, and later try to split them up. If you do that, you might
generate extloads that can't be split up, but have a valid ext+load
expansion. At vector-op legalization time, it's too late to generate
this kind of code, so you end up forced to scalarize. It's better to
just avoid creating egregiously illegal nodes.
This optimization is enabled unconditionally on X86.
Note that the splitting combine is happy with "custom" extloads. As
is, this bypasses the actual custom lowering, and just unrolls the
extload. But from what I've seen, this is still much better than the
current custom lowering, which does some kind of unrolling at the end
anyway (see for instance load_sext_4i8_to_4i64 on SSE2, and the added
FIXME).
Also note that the existing combine that forms extloads is now also
enabled on legal vectors. This doesn't have a big effect on X86
(because sext+load is usually combined to sext_inreg+aextload).
On ARM it fires on some rare occasions; that's for a separate commit.
Differential Revision: http://reviews.llvm.org/D6904
llvm-svn: 228325
The return value's address must be returned in %rax.
i.e. the callee needs to copy the sret argument (%rdi)
into the return value (%rax).
This probably won't manifest as a bug when the caller is LLVM-compiled
code. But it is an ABI guarantee and tools expect it.
llvm-svn: 228321
We should be setting UnrollingPreferences::MaxCount to MAX_UINT instead
of UnrollingPreferences::Count.
Count is a 'forced unrolling factor', while MaxCount sets an upper
limit to the unrolling factor.
Setting Count to MAX_UINT was causing the loop in the testcase to be
unrolled 15 times, when it only had a maximum of 4 iterations.
llvm-svn: 228303
The llvm.SI.end.cf intrinsic is used to mark the end of if-then blocks,
if-then-else blocks, and loops. It is responsible for updating the
exec mask to re-enable threads that had been masked during the preceding
control flow block. For example:
s_mov_b64 exec, 0x3 ; Initial exec mask
s_mov_b64 s[0:1], exec ; Saved exec mask
v_cmpx_gt_u32 exec, s[2:3], v0, 0 ; llvm.SI.if
do_stuff()
s_or_b64 exec, exec, s[0:1] ; llvm.SI.end.cf
The bug fixed by this patch was one where the llvm.SI.end.cf intrinsic
was being inserted into the header of loops. This would happen when
an if block terminated in a loop header and we would end up with
code like this:
s_mov_b64 exec, 0x3 ; Initial exec mask
s_mov_b64 s[0:1], exec ; Saved exec mask
v_cmpx_gt_u32 exec, s[2:3], v0, 0 ; llvm.SI.if
do_stuff()
LOOP: ; Start of loop header
s_or_b64 exec, exec, s[0:1] ; llvm.SI.end.cf <-BUG: The exec mask has the
same value at the beginning of each loop
iteration.
do_stuff();
s_cbranch_execnz LOOP
The fix is to create a new basic block before the loop and insert the
llvm.SI.end.cf there. This way the exec mask is restored before the
start of the loop instead of at the beginning of each iteration.
llvm-svn: 228302
Patch by Kit Barton.
Add the vector count leading zeros instruction for byte, halfword,
word, and doubleword sizes. This is a fairly straightforward addition
after the changes made for vpopcnt:
1. Add the correct definitions for the various instructions in
PPCInstrAltivec.td
2. Make the CTLZ operation legal on vector types when using P8Altivec
in PPCISelLowering.cpp
Test Plan
Created new test case in test/CodeGen/PowerPC/vec_clz.ll to check the
instructions are being generated when the CTLZ operation is used in
LLVM.
Check the encoding and decoding in test/MC/PowerPC/ppc_encoding_vmx.s
and test/Disassembler/PowerPC/ppc_encoding_vmx.txt respectively.
llvm-svn: 228301
Implement a BITCAST dag combine to transform i32->mmx conversion patterns
into a X86 specific node (MMX_MOVW2D) and guarantee that moves between
i32 and x86mmx are better handled, i.e., don't use store-load to do the
conversion..
llvm-svn: 228293
Avoid regression in previously supported MMX code by adding different
combinations of tests which exercise MMX bitcasts. Small improvements
to these patterns should come next.
llvm-svn: 228292
Parts of llvm were not expecting it and we wouldn't print
the entity size of the section.
Given what comdats are used for, having SHF_MERGE sections would be
just a small improvement, so just disable it for now.
Fixes pr22463.
llvm-svn: 228196
v2i32, i32, trunc i32 to i16, and truc i32 to i8 stores are legal for
all address spaces. We had marked them as custom in order to lower
them for the private address space, but this is no longer necessary.
This enables lowering of misaligned stores of these types in the
DAGLegalizer.
llvm-svn: 228189
In case CSE reuses a previoulsy unused register the dead-def flag has to
be cleared on the def operand, as exposed by the arm64-cse.ll test.
This fixes PR22439 and the corresponding rdar://19694987
Differential Revision: http://reviews.llvm.org/D7395
llvm-svn: 228178
Currently, Cortex-A72 is modelled as an Cortex-A57 except the fp
load balancing pass isn't enabled for Cortex-A72 as it's not
profitable to have it enabled for this core.
Patch by Ranjeet Singh.
llvm-svn: 228140
This associates movss and movsd with the packed single and packed double
execution domains (resp.). While this is largely cosmetic, as we now
don't have weird ping-pong-ing between single and double precision, it
is also useful because it avoids the domain fixing algorithm from seeing
domain breaks that don't actually exist. It will also be much more
important if we have an execution domain default other than packed
single, as that would cause us to mix movss and movsd with integer
vector code on a regular basis, a very bad mixture.
llvm-svn: 228135
version of the script.
Changes include:
- Using the VEX prefix
- Skipping more detail when we have useful shuffle comments to match
- Matching more shuffle comments that have been added to the printer
(yay!)
- Matching the destination registers of some AVX instructions
- Stripping trailing whitespace that crept in
- Fixing indentation issues
Nothing interesting going on here. I'm just trying really hard to ensure
these changes don't show up in the diffs with actual changes to the
backend.
llvm-svn: 228132
This reverts patches 223862, 224198, 224203, and 224754, which were all
related to the vector load/store combining and were reverted/reaplied
a few times due to the same alignment problems we're seeing now.
Further tests, mainly self-hosting Clang, will be needed to reapply this
patch in the future.
llvm-svn: 228129
zero for v8i16 as well.
These exhibit the same domain badness, but also exhibit other weaknesses
in our blend lowering. More fixes to come.
llvm-svn: 228126
This is the simplest form of bit-math based blending which only fires
when we are blending with zero and is relatively profitable. I've only
enabled this path on very specific lowering strategies. I'm planning to
widen its applicability in subsequent patches, but so far you'll notice
that even though we get fewer shufps instructions, we *still* do the bit
math in the FP execution port. I'm looking into why this is still
happening.
llvm-svn: 228124
update_llc_test_checks.py.
The exact format of the checks has changed over time. This includes
different indenting rules, new shuffle comments that have been added,
and more operand hiding behind regular expressions.
No functional change to the tests are expected here, but this will make
subsequent patches have a clean diff as they change shuffle lowering.
llvm-svn: 228097
update_llc_test_checks.py script uses, and refresh the checks in this
test.
No functionality changed here, just bringing this test up to work with
automated updates using the python script.
llvm-svn: 228096
This will make it easy to update as I change some parts of the X86
backend, makes it more clear what instruction differences are
introduced, and I find it makes it a bit easier to read as well.
llvm-svn: 228095
Simon Pilgrim