This makes the interface simpler and more consistent with the interface for
.dSYM files and fixes a bug where llvm-symbolizer would not read the dwp if
it was asked to symbolize data before symbolizing code.
Differential Revision: https://reviews.llvm.org/D63114
llvm-svn: 363025
One way of using llvm-symbolizer is to interactively within a process
write a line from a parent process to llvm-symbolizer's stdin, and then
read the output, then write the next line, read, etc. This worked as
long as all the lines were good. However, this didn't work prior to this
patch if any of the inputs were bad inputs, because the output is not
flushed after a bad input, meaning the parent process is sat waiting for
output, whilst llvm-symbolizer is sat waiting for input. This patch
flushes the output after every invocation of symbolizeInput when reading
from stdin. It also removes unnecessary flushing when llvm-symbolizer is
not reading addresses from stdin, which should give a slight performance
boost in these situations.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D62371
llvm-svn: 362511
This adds an alias for llvm-symbolizer with different defaults so that
it can be used as a drop-in replacement for GNU's addr2line.
If a substring "addr2line" is found in the tool's name:
* it defaults "-i", "-f" and "-C" to OFF;
* it uses "--output-style=GNU" by default.
Differential Revision: https://reviews.llvm.org/D60067
llvm-svn: 358749
With the latest changes, the option gets useful for users of
llvm-symbolizer, not only for the upcoming llvm-addr2line.
Differential Revision: https://reviews.llvm.org/D60816
llvm-svn: 358748
This patch addresses two differences in the output of llvm-symbolizer
and GNU's addr2line:
* llvm-symbolizer prints an empty line after the report for an address.
* With "-f -i=0", llvm-symbolizer replaces the name of an inlined
function with the name from the symbol table, i. e., the top caller
function in the inlining chain. addr2line preserves the name of the
inlined function.
Differential Revision: https://reviews.llvm.org/D60770
llvm-svn: 358747
addr2line allows -e to be grouped with other options; it also allows it
to prefix the value. Thus, all the following usages are possible:
* addr2line -f -e <bin> <addr>
* addr2line -fe <bin> <addr>
* addr2line -f e<bin> <addr>
* addr2line -fe<bin> <addr>
This patch adds the same for llvm-symbolizer.
Differential Revision: https://reviews.llvm.org/D60196
llvm-svn: 357676
In general, llvm-symbolizer follows the output style of GNU's addr2line.
However, there are still some differences; in particular, for a requested
address, llvm-symbolizer prints line and column, while addr2line prints
only the line number.
This patch adds a new switch to select the preferred style.
Differential Revision: https://reviews.llvm.org/D60190
llvm-svn: 357675
[Symbolizer] Add getModuleSectionIndexForAddress() helper routine
The https://reviews.llvm.org/D58194 patch changed symbolizer interface.
Particularily it requires not only Address but SectionIndex also.
Note object::SectionedAddress parameter:
Expected<DILineInfo> symbolizeCode(const std::string &ModuleName,
object::SectionedAddress ModuleOffset,
StringRef DWPName = "");
There are callers of symbolizer which do not know particular section index.
That patch creates getModuleSectionIndexForAddress() routine which
will detect section index for the specified address. Thus if caller
set ModuleOffset.SectionIndex into object::SectionedAddress::UndefSection
state then symbolizer would detect section index using
getModuleSectionIndexForAddress routine.
Differential Revision: https://reviews.llvm.org/D58848
llvm-svn: 356829
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
Summary:
rL189250 added a realpath call, and rL352916 because realpath breaks assumptions with some build systems. However, the /usr/lib/debug case has been clarified, falling back to /usr/lib/debug is currently broken if the obj passed in is a relative path. Adding a call to use absolute paths when falling back to /usr/lib/debug fixes that while still not making any realpath assumptions.
This also adds a --fallback-debug-path command line flag for testing (since we probably can't write to /usr/lib/debug from buildbot environments), but was also verified manually:
```
$ rm -f path/to/dwarfdump-test.elf-x86-64
$ strace llvm-symbolizer --obj=relative/path/to/dwarfdump-test.elf-x86-64.debuglink 0x40113f |& grep dwarfdump
```
Lookups went to relative/path/to/dwarfdump-test.elf-x86-64, relative/path/to/.debug/dwarfdump-test.elf-x86-64, and then finally /usr/lib/debug/absolute/path/to/dwarfdump-test.elf-x86-64.
Reviewers: dblaikie, samsonov
Reviewed By: dblaikie
Subscribers: krytarowski, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57916
llvm-svn: 353730
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r353048 which in turn was a reland of
r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353053
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353048
In order to make an option value truly optional, both the ValueOptional
and an empty-named value are required. This empty-named value appears in
the command-line help text, which is not ideal.
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
Reviewed by: thopre, ruiu
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 352750
If a stack trace or similar has a list of addresses from an executable
or DSO loaded at a variable address (e.g. due to ASLR), the addresses
will not directly correspond to the addresses stored in the object file.
If a user wishes to use llvm-symbolizer, they have to subtract the load
address from every address. This is somewhat inconvenient, especially as
the output of --print-address will result in the adjusted address being
listed, rather than the address coming from the stack trace, making it
harder to map results between the two.
This change adds a new switch to llvm-symbolizer --adjust-vma which
takes an offset, which is then used to automatically do this
calculation. The printed address remains the input address (allowing for
easy mapping), whilst the specified offset is applied to the addresses
when performing the lookup.
The switch is conceptually similar to llvm-objdump's new switch of the
same name (see D57051), which in turn mirrors a GNU switch. There is no
equivalent switch in addr2line.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D57151
llvm-svn: 352195
This change adds two options, -i and -inlines as aliases for the -inlining option to llvm-symbolizer to improve compatibility with the GNU addr2line utility which accepts these options.
It also modifies existing tests that use -inlining to exercise these new aliases as well.
This fixes PR40073.
Reviewed by: jhenderson, Quolyk, ruiu
Differential Revision: https://reviews.llvm.org/D57083
llvm-svn: 351999
This fixes https://bugs.llvm.org/show_bug.cgi?id=40072.
GNU addr2line's --functions switch is off by default, has a short alias
of -f, and does not take an argument. This patch changes llvm-symbolizer
to allow the second and third point (changing the default behaviour may
have negative impacts on users). If the option is missing a value, it
now treats it as "linkage".
This change does cause one previously valid command-line to behave
differently. Before --functions <value> was accepted, but now only
--functions=<value> is allowed (as well as --functions). The old
behaviour will result in the value being treated as a positional
argument.
The previous testing for --functions=short has been pulled out into a
new test that also tests the other accepted values and option formats.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D57049
llvm-svn: 351968
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
See https://bugs.llvm.org/show_bug.cgi?id=40070.
GNU addr2line accepts input addresses both on the command-line and via
stdin. llvm-symbolizer previously only supported the latter. This
change adds support for the former. As with addr2line, the new
behaviour is to only look for addresses on stdin if no positional
arguments were provided to llvm-symbolizer.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D56272
llvm-svn: 350821
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
Currently on Windows (_MSC_VER) LLVMSymbolizer supports only Microsoft mangling.
This fix just explicitly uses itaniumDemangle when mangled name starts with _Z.
Differential Revision: https://reviews.llvm.org/D44192
llvm-svn: 326959
The LLVM tools can be used as a replacement for binutils, in which case
it's convenient to create symlinks with the binutils names. Add support
for these symlinks in the build system. As with any other llvm tool
symlinks, the user can limit the installed symlinks by only adding the
desired ones to `LLVM_TOOLCHAIN_TOOLS`.
Differential Revision: https://reviews.llvm.org/D39530
llvm-svn: 317272
If you've archived the DWP file somewhere it's probably useful to be
able to just tell llvm-symbolizer where it is when you're symbolizing
stack traces from the binary.
This only provides a mechanism for specifying a single DWP file, good if
you're symbolizing a program with a single DWP file, but it's likely if
the program is dynamically linked that you might have a DWP for each
dynamic library - in which case this feature won't help (at least as
it's surfaced in llvm-symbolizer for now) - in theory it could be
extended to specify a collection of DWP files that could all be
consulted for split CU hash resolution.
llvm-svn: 309498
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
Summary:
Previously we would try to load PDBs for every PE executable we tried to
symbolize. If that failed, we would fall back to DWARF. If there wasn't
any DWARF, we'd print mostly useless symbol information using the export
table.
With this change, we only try to load PDBs for executables that claim to
have them. If that fails, we can now print an error rather than falling
back silently. This should make it a lot easier to diagnose and fix
common symbolization issues, such as not having DIA or not having a PDB.
Reviewers: zturner, eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20982
llvm-svn: 271725
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Introduce DIPrinter which takes care of rendering DILineInfo and
friends. This allows LLVMSymbolizer class to return a structured data
instead of plain std::strings.
llvm-svn: 251989
Introduce LLVMSymbolizer::symbolizeInlinedCode() instead of switching
on PrintInlining option passed to the constructor. This will be needed
once we retrun structured data (instead of std::string) from
LLVMSymbolizer and move printing logic out.
llvm-svn: 251675
This lets us make guesses about symbols in third party DLLs without
debug info, like MSVCR120.dll or kernel32.dll. dbghelp does the same
thing.
llvm-svn: 250582
Summary:
Previously the relative address flag only affected PDB debug info. Now
both DIContext implementations always expect to be passed virtual
addresses. llvm-symbolizer is now responsible for adding ImageBase to
module offsets when --relative-offset is passed.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12883
llvm-svn: 249784
Summary:
This makes it so that reports symbolized after the fact with
llvm-symbolizer are more similar to the ones we generate at runtime with
in-process dbghelp.
Reviewers: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11785
llvm-svn: 244512
getSymbolValue now returns a value that in convenient for most callers:
* 0 for undefined
* symbol size for common symbols
* offset/address for symbols the rest
Code that needs something more specific can check getSymbolFlags.
llvm-svn: 241605
This function can really fail since the string table offset can be out of
bounds.
Using ErrorOr makes sure the error is checked.
Hopefully a lot of the boilerplate code in tools/* can go away once we have
a diagnostic manager in Object.
llvm-svn: 241297
This patch changes linkage with dbghlp.dll for clang from static (at load time)
to on demand (at the first use of required functions). Clang uses dbghlp.dll
only in minor use-cases. First of all in case of crash and in case of plugin load.
The dbghlp.dll library can be absent on system. In this case clang will fail
to load. With lazy load of dbghlp.dll clang can work even if dbghlp.dll
is not available.
Differential Revision: http://reviews.llvm.org/D10737
llvm-svn: 241271
This is still a really odd function. Most calls are in object format specific
contexts and should probably be replaced with a more direct query, but at least
now this is not too obnoxious to use.
llvm-svn: 240777
COFF and MachO only define symbol sizes for common symbols. Reflect that
in the class hierarchy by having a method for common symbols only in the base
and a general one in ELF.
This avoids the need of using a magic value for the size, which had a few
problems
* Most callers didn't check for it.
* The ones that did could not tell the magic value from a file actually having
that value.
llvm-svn: 240529
The reason we need to search by name rather than by Triple::ArchType
is to handle subarchitecture correclty. There is no different ArchType
for the x86_64h architecture (it identifies itself as x86_64), or for
the various ARM subarches. The only way to get to the subarch slice
in an universal binary is to search by name.
This issue led to hard to debug and transient symbolication failures
in Asan tests (it mostly works, because the files are very similar).
This also affects the Profiling infrastucture as it is the other user
of that API.
Reviewers: samsonov, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10604
llvm-svn: 240339
Specifically, this patch correctly respects the -demangle option,
and additionally adds a hidden --relative-address option allows
input addresses to be relative to the module load address instead
of absolute addresses into the image.
llvm-svn: 236653
This will enable us to create a PDBContext so as to expose some
amount of debug info functionality through a common interace.
Differential Revision: http://reviews.llvm.org/D9205
Reviewed by: Alexey Samsonov
llvm-svn: 235612
In preparation for adding PDB support to LLVM, this moves the
DWARF parsing code to its own subdirectory under DebugInfo, and
renames LLVMDebugInfo to LLVMDebugInfoDWARF.
This is purely a mechanical / build system change.
Differential Revision: http://reviews.llvm.org/D7269
Reviewed by: Eric Christopher
llvm-svn: 227586
Summary:
Teach llvm-symbolizer about PowerPC64 ELF function descriptors. Symbols in the .opd section point to function descriptors, the first word of which is a pointer to the real function. For the purposes of symbolizing we pretend that the symbol points directly to the function.
This is enough to get decent function names in stack traces for unoptimized binaries, which fixes the sanitizer print-stack-trace test on PowerPC64 Linux.
Reviewers: kcc, willschm, samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6110
llvm-svn: 221514
The getBinary and getBuffer method now return ordinary pointers of appropriate
const-ness. Ownership is transferred by calling takeBinary(), which returns a
pair of the Binary and a MemoryBuffer.
llvm-svn: 221003
llvm-symbolizer will consult one of the .dSYM paths passed via -dsym-hint
if it fails to find the .dSYM bundle at the default location.
llvm-svn: 220004
This CL replaces the constant DarwinX86AsmBackend.PushInstrSize with a method
that lets the backend account for different sizes of "push %reg" instruction
sizes.
llvm-svn: 217020
Owning the buffer is somewhat inflexible. Some Binaries have sub Binaries
(like Archive) and we had to create dummy buffers just to handle that. It is
also a bad fit for IRObjectFile where the Module wants to own the buffer too.
Keeping this ownership would make supporting IR inside native objects
particularly painful.
This patch focuses in lib/Object. If something elsewhere used to own an Binary,
now it also owns a MemoryBuffer.
This patch introduces a few new types.
* MemoryBufferRef. This is just a pair of StringRefs for the data and name.
This is to MemoryBuffer as StringRef is to std::string.
* OwningBinary. A combination of Binary and a MemoryBuffer. This is needed
for convenience functions that take a filename and return both the
buffer and the Binary using that buffer.
The C api now uses OwningBinary to avoid any change in semantics. I will start
a new thread to see if we want to change it and how.
llvm-svn: 216002
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
While std::error_code itself seems to work OK in all platforms, there
are few annoying differences with regards to the std::errc enumeration.
This patch adds a simple llvm enumeration, which will hopefully avoid build
breakages in other platforms and surprises as we get more uses of
std::error_code.
llvm-svn: 210920
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
llvm-svn: 210687
Change --functions option in llvm-symbolizer tool to accept
values "none", "short" or "linkage". Update the tests and docs
accordingly.
llvm-svn: 209050
It is more appropriate than the current situation, when one flag
(AbsoluteFilePath) is relevant only if another flag is set.
This refactoring would also simplify fetching the short function name
(stored in DW_AT_name) instead of a linkage name returned currently.
No functionality change.
llvm-svn: 208921
Immutable DILineInfo doesn't bring any benefits and complicates
code. Also, use std::string instead of SmallString<16> for file
and function names - their length can vary significantly.
No functionality change.
llvm-svn: 206654
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
llvm-svn: 203083
Peter Collingbourne