Fix an out-of-bounds shift in emitLegacyZExt by using a slightly more
complicated dwarf expression to create the zext mask.
This addresses a UBSan diagnostic seen when compiling compiler-rt
(llvm.org/PR47927).
rdar://70307714
Differential Revision: https://reviews.llvm.org/D89838
This patch enables emitting DWARF `DW_OP_implicit_value` opcode when
tuning debug information for LLDB (`-debugger-tune=lldb`).
This will also propagate to Darwin platforms, since they use LLDB tuning
as a default.
rdar://67406059
Differential Revision: https://reviews.llvm.org/D90001
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Testing reveals that lldb and gdb have some problems with supporting
DW_OP_convert - gdb with Split DWARF tries to resolve the CU-relative
DIE offset relative to the skeleton DIE. lldb tries to treat the offset
as absolute, which judging by the llvm-dsymutil support for
DW_OP_convert, I guess works OK in MachO? (though probably llvm-dsymutil
is producing invalid DWARF by resolving the relative reference to an
absolute one?).
Specifically this disables DW_OP_convert usage in DWARFv5 if:
* Tuning for GDB and using Split DWARF
* Tuning for LLDB and not targeting MachO
LLVM rejects DWARF operator DW_OP_over. This DWARF operator is needed
for Flang to support assumed rank array.
Summary:
Currently LLVM rejects DWARF operator DW_OP_over. Below error is
produced when llvm finds this operator.
[..]
invalid expression
!DIExpression(151, 20, 16, 48, 30, 35, 80, 34, 6)
warning: ignoring invalid debug info in over.ll
[..]
There were some parts missing in support of this operator, which are
now completed.
Testing
-added a unit testcase
-check-debuginfo
-check-llvm
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89208
When given the -experimental-debug-variable-locations option (via -Xclang
or to llc), have SelectionDAG generate DBG_INSTR_REF instructions instead
of DBG_VALUE. For now, this only happens in a limited circumstance: when
the value referred to is not a PHI and is defined in the current block.
Other situations introduce interesting problems, addresed in later patches.
Practically, this patch hooks into InstrEmitter and if it can find a
defining instruction for a value, gives it an instruction number, and
points the DBG_INSTR_REF at that <instr, operand> pair.
Differential Revision: https://reviews.llvm.org/D85747
This patch adds support for DWARF attribute DW_AT_rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF attribute
DW_AT_rank is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89141
It's not possible to do this in complete generality - a CU using a
sec_offset DW_AT_ranges has no way of knowing where its rnglists
contribution starts, so should not attempt to parse any full rnglist
table/header to do so. And even using FORM_rnglistx there's no need to
parse the header - the offset can be computed using the CU's DWARF
format (32 or 64) to compute offset entry sizes, and then the list
parsed at that offset without ever trying to find a rnglist contribution
header immediately prior to the rnglists_base.
This allows LiveDebugValues to insert the proper DBG_VALUEs in live
out blocks if a spill is inserted before the use of a
register. Previously, this would see the register use as the last
DBG_VALUE, even though the stack slot should be treated as the live
out value.
This avoids an lldb test regression when D52010 is re-applied.
Until then, this one line fix removes the assert fail with basic block sections
with debug info. Bug tracking this: #47549
This fix does not generate loc list or DW_AT_const_value if the argument is
mentioned in a different section than the start of the function.
Temporarily fixes bugzilla : https://bugs.llvm.org/show_bug.cgi?id=47549
Differential Revision: https://reviews.llvm.org/D87787
Flag DIEs that have DW_CHILDREN_yes set in their abbreviation but don't
actually have any children.
rdar://59809554
Differential revision: https://reviews.llvm.org/D88048
This rewrites big parts of the fast register allocator. The basic
strategy of doing block-local allocation hasn't changed but I tweaked
several details:
Track register state on register units instead of physical
registers. This simplifies and speeds up handling of register aliases.
Process basic blocks in reverse order: Definitions are known to end
register livetimes when walking backwards (contrary when walking
forward then uses may or may not be a kill so we need heuristics).
Check register mask operands (calls) instead of conservatively
assuming everything is clobbered. Enhance heuristics to detect
killing uses: In case of a small number of defs/uses check if they are
all in the same basic block and if so the last one is a killing use.
Enhance heuristic for copy-coalescing through hinting: We check the
first k defs of a register for COPYs rather than relying on there just
being a single definition. When testing this on the full llvm
test-suite including SPEC externals I measured:
average 5.1% reduction in code size for X86, 4.9% reduction in code on
aarch64. (ranging between 0% and 20% depending on the test) 0.5%
faster compiletime (some analysis suggests the pass is slightly slower
than before, but we more than make up for it because later passes are
faster with the reduced instruction count)
Also adds a few testcases that were broken without this patch, in
particular bug 47278.
Patch mostly by Matthias Braun
This is needed to support assumed size array of fortran which can have missing upperBound/count
, contrary to current DISubrange support.
Example:
subroutine sub (array1, array2)
integer :: array1 (*)
integer :: array2 (4:9, 10:*)
array1(7:8) = 9
array2(5, 10) = 10
end subroutine
Now the validation check is relaxed for fortran.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D87500
This seems to have caused incorrect register allocation in some cases,
breaking tests in the Zig standard library (PR47278).
As discussed on the bug, revert back to green for now.
> Record internal state based on register units. This is often more
> efficient as there are typically fewer register units to update
> compared to iterating over all the aliases of a register.
>
> Original patch by Matthias Braun, but I've been rebasing and fixing it
> for almost 2 years and fixed a few bugs causing intermediate failures
> to make this patch independent of the changes in
> https://reviews.llvm.org/D52010.
This reverts commit 66251f7e1d, and
follow-ups 931a68f26b
and 0671a4c508. It also adjust some
test expectations.
The patch fixes emitting flags and the debug_line_offset field in
the header, as well as the reference to the macro string for
a pre-standard GNU .debug_macro extension.
Differential Revision: https://reviews.llvm.org/D87024
The patch fixes emitting the unit length field in the header of
the table and offsets to the entry pool. Note that while the patch
changes the common method to emit offsets, in fact, nothing is changed
for Apple accelerator tables, because we do not yet support DWARF64 for
those targets.
Differential Revision: https://reviews.llvm.org/D87023
The patch fixes emitting the header of the table. The content is
independent of the DWARF format.
Differential Revision: https://reviews.llvm.org/D87022
The transition is done by using methods of AsmPrinter which
automatically emit values in compliance with the selected DWARF format.
Differential Revision: https://reviews.llvm.org/D87013
The patch fixes calculating the size of the table and emitting
the fields which depend on the DWARF format by using methods that
choose appropriate sizes automatically.
Differential Revision: https://reviews.llvm.org/D87012
The patch fixes emitting the offset to the type DIE. All other fields
are already fixed in previous patches.
Differential Revision: https://reviews.llvm.org/D87021
These two fixes are better to go together because llvm-dwarfdump is
unable to dump a table when another one is malformed.
Differential Revision: https://reviews.llvm.org/D87018
The patch uses a common method to determine the appropriate form for
the value of the attribute.
Differential Revision: https://reviews.llvm.org/D87016
The patch also adds a method to choose an appropriate DWARF form
to represent section offsets according to the version and the format
of producing debug info.
Differential Revision: https://reviews.llvm.org/D87014
The patch adds a switch to enable emitting debug info in the 64-bit
DWARF format. Most emitter for sections will be updated in the subsequent
patches, whereas for .debug_line and .debug_frame the emitters are in
the MC library, which is already updated.
For now, the switch is enabled only for 64-bit ELF targets.
Differential Revision: https://reviews.llvm.org/D87011
As stated in section 6.1.1.2, DWARFv5, p. 142,
| The last entry for each name is followed by a zero byte that
| terminates the list. There may be gaps between the lists.
The patch changes emitting a 4-byte zero value to a 1-byte one, which
effectively removes the gap between entry lists, and thus saves
approximately 3 bytes per name; the calculation is not exact because
the total size of the table is aligned to 4.
Differential Revision: https://reviews.llvm.org/D86927
Almost NFC (see end).
The backwards scan in validThroughout significantly contributed to compile time
for a pathological case, causing the 'X86 Assembly Printer' pass to account for
roughly 70% of the run time. This patch guards the loop against running
unnecessarily, bringing the pass contribution down to 4%.
Almost NFC: There is a hack in validThroughout which promotes single constant
value DBG_VALUEs in the prologue to be live throughout the function. We're more
likely to hit this code path with this patch applied. Similarly to the parent
patches there is a small coverage change reported in the order of 10s of bytes.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86153
With the changes introduced in D86151 we can now check for single locations
which span multiple blocks for inlined scopes and blocks.
D86151 introduced the InstructionOrdering parameter, replacing a scan through
MBB instructions. The functionality to compare instruction positions across
blocks was add there, and this patch just removes the exit checks that were
previously (but no longer) required.
CTMark shows a geomean binary size reduction of 2.2% for RelWithDebInfo builds.
llvm-locstats (using D85636) shows a very small variable location coverage
change in 5 of 10 binaries, but just like in D86151 it is only in the order of
10s of bytes.
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D86152
With this patch we're now accounting for two more cases which should be
considered 'valid throughout': First, where RangeEnd is ScopeEnd. Second, where
RangeEnd comes before ScopeEnd when including meta instructions, but are both
preceded by the same non-meta instruction.
CTMark shows a geomean binary size reduction of 1.5% for RelWithDebInfo builds.
`llvm-locstats` (using D85636) shows a very small variable location coverage
change in 2 of 10 binaries, but it is in the order of 10s of bytes which lines
up with my expectations.
I've added a test which checks both of these new cases. The first check in the
test isn't strictly necessary for this patch. But I'm not sure that it is
explicitly tested anywhere else, and is useful for the final patch in the
series.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86151
This patch was reverted in 7c182663a8 due to some failures
observed on PCC based machines. Failures were due to Endianness issue and
long double representation issues.
Patch is revised to address Endianness issue. Furthermore, support
for emission of `DW_OP_implicit_value` for `long double` has been removed
(since it was unclean at the moment). Planning to handle this in
a clean way soon!
For more context, please refer to following review link.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
llvm is missing support for DW_OP_implicit_value operation.
DW_OP_implicit_value op is indispensable for cases such as
optimized out long double variables.
For intro refer: DWARFv5 Spec Pg: 40 2.6.1.1.4 Implicit Location Descriptions
Consider the following example:
```
int main() {
long double ld = 3.14;
printf("dummy\n");
ld *= ld;
return 0;
}
```
when compiled with tunk `clang` as
`clang test.c -g -O1` produces following location description
of variable `ld`:
```
DW_AT_location (0x00000000:
[0x0000000000201691, 0x000000000020169b): DW_OP_constu 0xc8f5c28f5c28f800, DW_OP_stack_value, DW_OP_piece 0x8, DW_OP_constu 0x4000, DW_OP_stack_value, DW_OP_bit_piece 0x10 0x40, DW_OP_stack_value)
DW_AT_name ("ld")
```
Here one may notice that this representation is incorrect(DWARF4
stack could only hold integers(and only up to the size of address)).
Here the variable size itself is `128` bit.
GDB and LLDB confirms this:
```
(gdb) p ld
$1 = <invalid float value>
(lldb) frame variable ld
(long double) ld = <extracting data from value failed>
```
GCC represents/uses DW_OP_implicit_value in these sort of situations.
Based on the discussion with Jakub Jelinek regarding GCC's motivation
for using this, I concluded that DW_OP_implicit_value is most appropriate
in this case.
Link: https://gcc.gnu.org/pipermail/gcc/2020-July/233057.html
GDB seems happy after this patch:(LLDB doesn't have support
for DW_OP_implicit_value)
```
(gdb) p ld
p ld
$1 = 3.14000000000000012434
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
Theory was that we should never reach a non-type unit (eg: type in an
anonymous namespace) when we're already in the invalid "encountered an
address-use, so stop emitting types for now, until we throw out the
whole type tree to restart emitting in non-type unit" state. But that's
not the case (prior commit cleaned up one reason this wasn't exposed
sooner - but also makes it easier to test/demonstrate this issue)
dumpStringOffsetsSection() expects the size of a contribution to be
correctly aligned. The patch adds the corresponding verifications for
pre-v5 cases.
Differential Revision: https://reviews.llvm.org/D85739
Allow the GNU .debug_macro extension to be emitted for DWARF versions
earlier than 5. The extension is basically what became DWARF 5's format,
except that a DW_AT_GNU_macros attribute is emitted, and some entries
like the strx entries are missing. In this patch I emit GNU's indirect
entries, which are the same as DWARF 5's strp entries.
This patch adds the extension behind a hidden LLVM flag,
-use-gnu-debug-macro. I would later want to enable it by default when
tuning for GDB and targeting DWARF versions earlier than 5.
The size of a Clang 8.0 binary built with RelWithDebInfo and the flags
"-gdwarf-4 -fdebug-macro" reduces from 1533 MB to 1349 MB with
.debug_macro (compared to 1296 MB without -fdebug-macro).
Reviewed By: SouraVX, dblaikie
Differential Revision: https://reviews.llvm.org/D82975
Allow the GNU .debug_macro extension to be parsed and printed by
llvm-dwarfdump. In an upcoming patch support will be added for emitting
that format also.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D82974
This patch changes the functionality of AsmPrinter to name the basic block end labels as LBB_END${i}_${j}, with ${i} being the identifier for the function and ${j} being the identifier for the basic block. The new naming scheme is consistent with how basic block labels are named (.LBB${i}_{j}), and how function end symbol are named (.Lfunc_end${i}) and helps to write stronger tests for the upcoming patch for BB-Info section (as proposed in https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html). The end label is used with basicblock-labels (BB-Info section in future) and basicblock-sections to compute the size of basic blocks and basic block sections, respectively. For BB sections, the section containing the entry basic block will not have a BB end label since it already gets the function end-label.
This label is cached for every basic block (CachedEndMCSymbol) like the label for the basic block (CachedMCSymbol).
Differential Revision: https://reviews.llvm.org/D83885
D68049 created options for basic block sections: -fbasic-block-sections=,
-funique-basic-block-section-names. Rename options in llc and lld (--lto-)
to be consistent. Specifically,
+ Rename basicblock-sections to basic-block-sections
+ Rename unique-bb-section-names to unique-basic-block-section-names
Differential Revision: https://reviews.llvm.org/D84462
This patch was reverted in 9d2da6759b due to assertion failure seen
in `test/DebugInfo/Sparc/subreg.ll`. Assertion failure was happening
due to malformed/unhandeled DwarfExpression.
Differential Revision: https://reviews.llvm.org/D83560
Summary:
llvm is missing support for DW_OP_implicit_value operation.
DW_OP_implicit_value op is indispensable for cases such as
optimized out long double variables.
For intro refer: DWARFv5 Spec Pg: 40 2.6.1.1.4 Implicit Location Descriptions
Consider the following example:
```
int main() {
long double ld = 3.14;
printf("dummy\n");
ld *= ld;
return 0;
}
```
when compiled with tunk `clang` as
`clang test.c -g -O1` produces following location description
of variable `ld`:
```
DW_AT_location (0x00000000:
[0x0000000000201691, 0x000000000020169b): DW_OP_constu 0xc8f5c28f5c28f800, DW_OP_stack_value, DW_OP_piece 0x8, DW_OP_constu 0x4000, DW_OP_stack_value, DW_OP_bit_piece 0x10 0x40, DW_OP_stack_value)
DW_AT_name ("ld")
```
Here one may notice that this representation is incorrect(DWARF4
stack could only hold integers(and only up to the size of address)).
Here the variable size itself is `128` bit.
GDB and LLDB confirms this:
```
(gdb) p ld
$1 = <invalid float value>
(lldb) frame variable ld
(long double) ld = <extracting data from value failed>
```
GCC represents/uses DW_OP_implicit_value in these sort of situations.
Based on the discussion with Jakub Jelinek regarding GCC's motivation
for using this, I concluded that DW_OP_implicit_value is most appropriate
in this case.
Link: https://gcc.gnu.org/pipermail/gcc/2020-July/233057.html
GDB seems happy after this patch:(LLDB doesn't have support
for DW_OP_implicit_value)
```
(gdb) p ld
p ld
$1 = 3.14000000000000012434
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
This is an alternative proposal to D81476 (and D82084) - the details were sufficiently confusing to me it seemed easier to write some code and see how it looks.
Reviewers: SouraVX
Differential Revision: https://reviews.llvm.org/D84278
Summary:
This patch reduces file size in debug builds by dropping variable locations a
debugger user will not see.
After building the debug entity history map we loop through it. For each
variable we look at each entry. If the entry opens a location range which does
not intersect any of the variable's scope's ranges then we mark it for removal.
After visiting the entries for each variable we also mark any clobbering
entries which will no longer be referenced for removal, and then finally erase
the marked entries. This all requires the ability to query the order of
instructions, so before this runs we number them.
Tests:
Added llvm/test/DebugInfo/X86/trim-var-locs.mir
Modified llvm/test/DebugInfo/COFF/register-variables.ll
Branch folding merges the tails of if.then and if.else into if.else. Each
blocks' debug-locations point to different scopes so when they're merged we
can't use either. Because of this the variable 'c' ends up with a location
range which doesn't cover any instructions in its scope; with the patch
applied the location range is dropped and its flag changes to IsOptimizedOut.
Modified llvm/test/DebugInfo/X86/live-debug-variables.ll
Modified llvm/test/DebugInfo/ARM/PR26163.ll
In both tests an out of scope location is now removed. The remaining location
covers the entire scope of the variable allowing us to emit it as a single
location.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D82129
The test doesn't really demonstrate the use of the debug_loc.dwo section
distinct from the debug_loc section for strings in debug_macro.dwo -
because there are no strings that appear uin debug_loc.dwo that weren't
already in debug_loc, so the indexes would remain the same even if the
section that was used was fixed (to use debug_loc.dwo as per spec).
Summary:
This support is needed for the Fortran array variables with pointer/allocatable
attribute. This support enables debugger to identify the status of variable
whether that is currently allocated/associated.
for pointer array (before allocation/association)
without DW_AT_associated
(gdb) pt ptr
type = integer (140737345375288:140737354129776)
(gdb) p ptr
value requires 35017956 bytes, which is more than max-value-size
with DW_AT_associated
(gdb) pt ptr
type = integer (:)
(gdb) p ptr
$1 = <not associated>
for allocatable array (before allocation)
without DW_AT_allocated
(gdb) pt arr
type = integer (140737345375288:140737354129776)
(gdb) p arr
value requires 35017956 bytes, which is more than max-value-size
with DW_AT_allocated
(gdb) pt arr
type = integer, allocatable (:)
(gdb) p arr
$1 = <not allocated>
Testing
- unit test cases added
- check-llvm
- check-debuginfo
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83544
DWARFListTableHeader::length() handles the zero value of HeaderData.Length
in a special way, which makes the result different from the calculated
value of FullLength, which leads to triggering an assertion. The patch
moves the assertion a bit later when `FullLength` is already checked for
minimal allowed value.
Differential Revision: https://reviews.llvm.org/D82886
Attach DbgLoc on insertvalue/extractvalue instructions created by
DeadArgumentElimination.
This fixes the PR46350.
Differential Revision: https://reviews.llvm.org/D81939
This patch uses ranges for debug information when a function contains basic block sections rather than using [lowpc, highpc]. This is also the first in a series of patches for debug info and does not contain the support for linker relaxation. That will be done as a follow up patch.
Differential Revision: https://reviews.llvm.org/D78851
When the zext gets promoted, it used to retain the original location,
which pessimizes the debugging experience causing an unexpected
jump in stepping at -Og.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46120 (which also
contains a full C repro).
Differential Revision: https://reviews.llvm.org/D81437
Record internal state based on register units. This is often more
efficient as there are typically fewer register units to update
compared to iterating over all the aliases of a register.
Original patch by Matthias Braun, but I've been rebasing and fixing it
for almost 2 years and fixed a few bugs causing intermediate failures
to make this patch independent of the changes in
https://reviews.llvm.org/D52010.
Summary:
This is a result of the discussion at D78113. Previously we would be
only giving the current offset at which the error was detected. However,
this was phrased somewhat ambiguously (as it could also mean that end of
data was at that offset). The new error message includes the current
offset as well as the extent of the data being read.
I've changed a couple of file-level static functions into private member
functions in order to avoid passing a bunch of new arguments everywhere.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78558
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
This patch adds support for emission of following DWARFv5 macro
forms in .debug_macro.dwo section:
- DW_MACRO_start_file
- DW_MACRO_end_file
- DW_MACRO_define_strx
- DW_MACRO_undef_strx
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D78866
Summary:
This caused incorrect debug information for parameters:
Previously, after a COPY of a parameter that changes the width,
we would emit a DBG_VALUE that continues to be associated to that
parameter, even though it now used a different width.
This made the LiveDebugValues pass assume the parameter value
got clobbered and it stopped tracking the parameter entry
value, leading to incorrect debug information.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39715
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80819
DW_MACRO_define_strx forms are supported now in llvm-dwarfdump and these
forms can be used in both debug_macro[.dwo] sections. An added advantage
for using strx forms over strp forms is that it uses indices
approach instead of a relocation to debug_str section.
This patch unify the emission for debug_macro section.
Reviewed by: dblaikie, ikudrin
Differential Revision: https://reviews.llvm.org/D78865
This patch extends the parsing and dumping support of llvm-dwarfdump
for debug_macro.dwo section.
Following forms are supported:
- DW_MACRO_define
- DW_MACRO_undef
- DW_MACRO_start_file
- DW_MACRO_end_file
- DW_MACRO_define_strx
- DW_MACRO_undef_strx
- DW_MACRO_define_strp
- DW_MACRO_undef_strp
Reviewed by: ikudrin, dblaikie
Differential Revision: https://reviews.llvm.org/D78500
This patch upgrades DISubrange to support fortran requirements.
Summary:
Below are the updates/addition of fields.
lowerBound - Now accepts signed integer or DIVariable or DIExpression,
earlier it accepted only signed integer.
upperBound - This field is now added and accepts signed interger or
DIVariable or DIExpression.
stride - This field is now added and accepts signed interger or
DIVariable or DIExpression.
This is required to describe bounds of array which are known at runtime.
Testing:
unit test cases added (hand-written)
check clang
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D80197
I've noticed an issue with "Data.getRelocatedValue(...)" call.
it might silently ignore an error when a content is truncated.
That leads to an infinite loop in the code (e.g. llvm-readobj hangs).
After fixing the issue I've found that actually we always tried
to read past the end of a section, even when a content was valid.
It happened because the terminator CIE (a CIE with the length == 0)
was never handled. At first I've tried just to stop adding the terminator
entry (and return), but it does not seem to be correct, because tools like
llvm-objdump might want to print something for such entries
(see comments in the code and test cases).
This patch fixes issues mentioned, provides new test cases for
both llvm-readobj and lib/DebugInfo and adds FIXMEs to existent
test cases related.
Differential revision: https://reviews.llvm.org/D80299
Vedant Kumar