This uses a really simple approach of converting to an i8 vector
and extracting. This is probably not the best approach especially
if you know the index is constant.
Other ideas:
-Store to stack temporary using vse1, load as scalar and shift.
-Sort of bitcast the vector to a vector of i8, slide down the
appropriate 8 bit element, copy to scalar, shift down the
correct bit within the 8 bits we extracted. Not exactly sure
how to describe such a bitcast from i1 vector to i8 vector
within the type system for elements less than 8.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98310
On riscv32, i64 isn't a legal scalar type but we would like to
support scalable vectors of i64.
This patch introduces a new node that can represent a splat made
of multiple scalar values. I've used this new node to solve the current
crashes we experience when getConstant is used after type legalization.
For RISCV, we are now default expanding SPLAT_VECTOR to SPLAT_VECTOR_PARTS
when needed and then handling the SPLAT_VECTOR_PARTS later during
LegalizeOps. I've remove the special case I previously put in for
ABS for D97991 as the default expansion is now able to succesfully
use getConstant.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98004
Currently we crash in type legalization any time an intrinsic
uses a scalar i64 on RV32.
This patch adds support for type legalizing this to prevent
crashing. I don't promise that it uses the best possible codegen
just that it is functional.
This first version handles 3 cases. vmv.v.x intrinsic, vmv.s.x
intrinsic and intrinsics that take a scalar input, splat it and
then do some operation.
For vmv.v.x we'll either rely on hardware sign extension for
constants or we'll convert it to multiple splats and bit
manipulation.
For vmv.s.x we use a really unoptimal sequence inspired by what
we do for an INSERT_VECTOR_ELT.
For the third case we'll either try to use the .vi form for
constants or convert to a complicated splat and bitmanip and use
the .vv form of the operation.
I've renamed the ExtendOperand field to SplatOperand now use it
specifically for the third case. The first two cases are handled
by custom lowering specifically for those intrinsics.
I haven't updated all tests yet, but I tried to cover a subset
that includes single-width, widening, and narrowing.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97895
The type legalizer will visit the result before the operands. To
avoid creating an illegal target specific node or falling back to
scalarization, we need to manually split vector operands.
This still doesn't handle the case of non-power of 2 operands
which need to be widened. I'm not sure the type legalizer is
ready for it. I think we would need to insert an
INSERT_SUBVECTOR with the power of 2 type we want, with an undef
first operand, and the non-power of 2 orignal operand as the vector
to insert. Then fill in the neutral elements into the elements the
padded elements. Alternatively we INSERT_SUBVECTOR into a neutral vector.
From there we carry on splitting if needed to get to a legal type
then do the target specific code.
The problem with this is the type legalizer doesn't know how to
widen an insert_subvector yet. We would need to add that including
the handling for a non-undef first vector.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98292
I've left mask registers to a future patch as we'll need
to convert them to full vectors, shuffle, and then truncate.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97609
I've included tests that require type legalization to split the
vector. The i64 version of these scalarizes on RV32 due to type
legalization visiting the result before the vector type. So we
have to abort our custom expansion to avoid creating target
specific nodes with an illegal type. Then type legalization ends
up scalarizing. We might be able to fix this by doing custom
splitting for large vectors in our handler to get down to a legal
type.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98102
Previously we set the value to -1, but the SEW information could
be useful for scheduling.
Reviewed By: frasercrmck, rogfer01
Differential Revision: https://reviews.llvm.org/D98062
The default fixed vector expansion uses sra+xor+add since it can't
see that smax is legal due to our custom handling. So we select
smax(X, sub(0, X)) manually.
Scalable vectors are able to use the smax expansion automatically
for most cases. It crashes in one case because getConstant can't build a
SPLAT_VECTOR for nxvXi64 when i64 scalars aren't legal. So
we manually emit a SPLAT_VECTOR_I64 for that case.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97991
As far as I know we're not enforcing the StdExtM must be enabled
to use the V extension. If we use an assert here and hit this
code in a release build we'll silently emit an invalid instruction.
By using a diagnostic we report the error to the user in release
builds. I think there may still be a later fatal error from
the code emitter though.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97970
The three bit nf is one less than the number of NFIELDS,
so we manually decrement 1 for VS1/2/4/8R & VL1/2/4/8R.
Reviewed By: craig.topper
Differential revision: https://reviews.llvm.org/D98185
While working on adding fixed-length vectors to the calling convention,
it was necessary to be able to query for a fixed-length vector container
type without access to an instance of SelectionDAG.
This patch modifies the "main" getContainerForFixedLengthVector function
to use an instance of TargetLowering rather than SelectionDAG, and
preserves the SelectionDAG overload as a wrapper.
An additional non-static version of the function was also added to
simplify the common case in RISCVTargetLowering.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97925
A setcc can be created during LegalizeDAG after select_cc has been
created. This combine will enable us to fold these late setccs.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98132
This pattern occurs when lowering for overflow operations
introduce an xor after select_cc has already been formed.
I had to rework another combine that looked for select_cc of an xor
with 1. That xor will now get combined away so we just need to
look for the RHS of the select_cc being 1.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98130
By implementing the method "unsigned RISCVTTIImpl::getRegisterBitWidth(bool Vector)",
fixed-length vectorization is enabled when possible. Without this method, the
"#pragma clang loop" directive is needed to enable vectorization(or the cost model
may inform LLVM that "Vectorization is possible but not beneficial").
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97549
This patch addresses a compiler crash resulting from passing a
fixed-length type to one that expects scalable vector types. An
assertion was added to prevent this regressing in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97868
This patch fixes up one case where the fixed-length-vector VL was
dropped (falling back to VLMAX) when inserting vector elements, as the
code would lower via ISD::INSERT_VECTOR_ELT (at index 0) which loses the
fixed-length vector information.
To this end, a custom node, VMV_S_XF_VL, was introduced to carry the VL
operand through to the final instruction. This node wraps the RVV
vmv.s.x and vmv.s.f instructions, which were being selected by
insert_vector_elt anyway.
There should be no observable difference in scalable-vector codegen.
There is still one outstanding drop from fixed-length VL to VLMAX, when
an i64 element is inserted into a vector on RV32; the splat (which is
custom legalized) has no notion of the original fixed-length vector
type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97842
To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
This patch enables support for lowering INSERT_VECTOR_ELT on
fixed-length vector types. The strategy follows that for scalable vector
types.
This patch also includes a quick fix to prevent the compiler infinitely
looping between lowering BUILD_VECTOR as VECTOR_SHUFFLE and back again.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97698
The default expansion of CONCAT_VECTORS goes through the stack. This
patch avoids that penalty by custom-lowering CONCAT_VECTORS to a series
of INSERT_SUBVECTOR nodes. Futher optimizations are possible, but this
is a good start.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97692
Like with EXTRACT_SUBVECTOR, INSERT_SUBVECTOR poses a problem
for vector masks as RVV isn't able to slide mask types around. We choose
instead to bitcast to equivalently-sized i8 types where we can, else we
zero-extend, perform the operation, and truncate back down.
One test was left disabled due to a crash in the legalizer.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97559
This patch fixes a bug where the lowering for INSERT_SUBVECTOR and
EXTRACT_SUBVECTOR would insist on first extracting a register-aligned
LMUL1 vector type before perfoming the slide up/down. This was even if
the vector was a fractional LMUL type, in which case the aligned
EXTRACT_SUBVECTOR was invalid.
This issue only occurred for scalable vector types, but a variety of
tests for both scalable and fixed-length vectors have been added to
ensure this does not regress in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97556
This patch unifies the two disparate paths for lowering INSERT_SUBVECTOR
operations under one roof. Consequently, with this patch it is possible to
support any fixed-length subvector insertion, not just "cast-like" ones.
As before, support for the insertion of mask vectors will come in a
separate patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97543
This patch adds support for extracting subvectors from vector masks.
This can be either extracting a scalable vector from another, or a fixed-length
vector from a fixed-length or scalable vector.
Since RVV lacks a way to slide vector masks down on an element-wise
basis and we don't know the true length of the vector registers, in many
cases we must resort to using equivalently-sized i8 vectors to perform
the operation. When this is not possible we fall back and extend to a
suitable i8 vector.
Support was also added for fixed-length truncation to mask types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97475
If a global object is listed in `@llvm.used`, place it in a unique section with
the `SHF_GNU_RETAIN` flag. The section is a GC root under `ld --gc-sections`
with LLD>=13 or GNU ld>=2.36.
For front ends which do not expect to see multiple sections of the same name,
consider emitting `@llvm.compiler.used` instead of `@llvm.used`.
SHF_GNU_RETAIN is restricted to ELFOSABI_GNU and ELFOSABI_FREEBSD in
binutils. We don't do the restriction - see the rationale in D95749.
The integrated assembler has supported SHF_GNU_RETAIN since D95730.
GNU as>=2.36 supports section flag 'R'.
We don't need to worry about GNU ld support because older GNU ld just ignores
the unknown SHF_GNU_RETAIN.
With this change, `__attribute__((retain))` functions/variables emitted
by clang will get the SHF_GNU_RETAIN flag.
Differential Revision: https://reviews.llvm.org/D97448
This will allow FrameIndex as the base address instead of
emitting a separate ADDI from isel. eliminateFrameIndex will likely turn
it back into an ADDI, but this makes things consistent with the
SDPatterns and VLPatterns.
I only tested one case for simplicity. I can test more if reviewers
want.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97221
This patch extends the support for scalable-vector int->fp and fp->int
conversions by additionally handling fixed-length vectors.
The existing scalable-vector lowering re-expresses widening/narrowing by
x4+ conversions as standard nodes. The fixed-length vector support slots
in at "the end" of this process by lowering the now equally-sized and
widening/narrowing by x2 nodes to our custom VL versions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97374
This patch extends the support for vector FP_ROUND and FP_EXTEND by
including support for fixed-length vector types. Since fixed-length
vectors use "VL" nodes and scalable vectors can use the standard nodes,
there is slightly more to do in the fixed-length case. A helper function
was introduced to try and reduce the divergent paths. It is expected
that this function will similarly come in useful for lowering the
int-to-fp and fp-to-int operations for fixed-length vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97301
This patch extends support for our custom-lowering of scalable-vector
truncates to include those of fixed-length vectors. It does this by
co-opting the custom RISCVISD::TRUNCATE_VECTOR node and adding mask and
VL operands. This avoids unnecessary duplication of patterns and
inflation of the ISel table.
Some truncates go through CONCAT_VECTORS which currently isn't
efficiently handled, as it goes through the stack. This can be improved
upon in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97202
This patch adds support for the custom lowering sign- and zero-extension
of fixed-length vector types. It does so through custom nodes. Since the
source and destination types are (necessarily) of different sizes, it is
possible that the source type is legal whilst the larger destination
type isn't. In this case the legalization makes heavy use of
EXTRACT_SUBVECTOR.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97194
This patch unifies the two disparate paths for lowering
EXTRACT_SUBVECTOR operations under one roof. Consequently, with this
patch it is possible to support any fixed-length subvector extraction,
not just "cast-like" ones.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97192
We always create the VL operand using a register, but if we can
determine that it came from an ADDI X0, imm with a sufficiently
small immediate, we can use VSETIVLI.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97332
We just started using a ComplexPattern for sexti32. This updates
zexti32 to match.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D97231
I've changed to use VL=1 for slidedown and shifts to avoid extra
element processing that we don't need.
The i64 fixed vector handling on i32 isn't great if the vector type
isn't legal due to an ordering issue in type legalization. If the
vector type isn't legal, we fall back to default legalization
which will bitcast the vector to vXi32 and use two independent extracts.
Doing better will require handling several different cases by
manually inserting insert_subvector/extract_subvector to adjust the type
to a legal vector before emitting custom nodes.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97319
This patch extends the support for RVV INSERT_SUBVECTOR to cover those
which don't align to a vector register boundary. Like the support for
EXTRACT_SUBVECTOR in D96959, it accomplishes this by extracting the
nearest register-sized subvector (a subregister operation), then sliding
the vector down with VSLIDEDOWN, inserting the subvector to the first
position, and sliding the vector back up again afterwards.
Unlike subvector extraction, for vectors that occupy less than a full
vector register we must preserve the untouched elements. We do this by
lowering to an LMUL=1 INSERT_SUBVECTOR using the above method and
lowering that to a VSLIDEUP with a zero offset. This uses a
tail-undisturbed policy and so has the effect of "sliding in" the
subvector elements while preserving the surrounding ones.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96972
An i64 AssertZExt from a type smaller than i32 has at least 33
leading zeros which mean it has at least 33 sign bits.
Since we have a couple patterns that use two sexti32, I've
switched to a ComplexPattern so tablegen didn't have to generate
9 different permutations.
As noted in the FIXME, maybe we should just call computeNumSignBits,
but we don't have tests that benefit from that yet.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D97130
This should fix the issue reported in D96972.
I don't have a good test case for this without those changes.
Differential Revision: https://reviews.llvm.org/D97082
A previous patch moved the index versions. This moves the rest.
I also removed the custom lowering for VLEFF since we can now
do everything directly in the isel handling.
I had to update getLMUL to handle mask registers to index the
pseudo table correctly for VLE1/VSE1.
This is good for another 15K reduction in llc size.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97097
This also removes a pattern from RISCV that is no longer needed
since the sexti32 on the LHS of the srem in the pattern implies
the result is sign extended so the sign_extend_inreg should be
removed in DAG combine now.
Reviewed By: luismarques, RKSimon
Differential Revision: https://reviews.llvm.org/D97133
Craig Topper