Summary:
This fragment emits a symbol ID and will be useful for more than just Safe SEH
tables (e.g., I plan to re-use it for Control Flow Guard tables). This is
simply a rename refactor.
Reviewers: rnk
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39770
llvm-svn: 317703
As of today we only use .cfi_offset to specify the offset of a CSR, but
we never use .cfi_restore when the CSR is restored.
If we want to perform a more advanced type of shrink-wrapping, we need
to use .cfi_restore in order to switch the CFI state between blocks.
This patch only aims at adding support for the directive.
Differential Revision: https://reviews.llvm.org/D36114
llvm-svn: 317199
This ensures that each segment has a unique address.
Without this, consecutive zero sized symbols would
end up with the same address and the linker cannot
map symbols to unique data segments.
Differential Revision: https://reviews.llvm.org/D39107
llvm-svn: 316717
Infrastructure designed for padding code with nop instructions in key places such that preformance improvement will be achieved.
The infrastructure is implemented such that the padding is done in the Assembler after the layout is done and all IPs and alignments are known.
This patch by itself in a NFC. Future patches will make use of this infrastructure to implement required policies for code padding.
Reviewers:
aaboud
zvi
craig.topper
gadi.haber
Differential revision: https://reviews.llvm.org/D34393
Change-Id: I92110d0c0a757080a8405636914a93ef6f8ad00e
llvm-svn: 316413
This will prevent doubling of line endings when parsing assembly and
emitting assembly.
Otherwise we'd parse the directive, consume the end of statement, hit
the next end of statement, and emit a fresh newline.
llvm-svn: 315943
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
MCObjectStreamer owns its MCCodeEmitter -- this fixes the types to reflect that,
and allows us to remove the last instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315531
Summary:
This adds a set of new directives that describe 32-bit x86 prologues.
The directives are limited and do not expose the full complexity of
codeview FPO data. They are merely a convenience for the compiler to
generate more readable assembly so we don't need to generate tons of
labels in CodeGen. If our prologue emission changes in the future, we
can change the set of available directives to suit our needs. These are
modelled after the .seh_ directives, which use a different format that
interacts with exception handling.
The directives are:
.cv_fpo_proc _foo
.cv_fpo_pushreg ebp/ebx/etc
.cv_fpo_setframe ebp/esi/etc
.cv_fpo_stackalloc 200
.cv_fpo_endprologue
.cv_fpo_endproc
.cv_fpo_data _foo
I tried to follow the implementation of ARM EHABI CFI directives by
sinking most directives out of MCStreamer and into X86TargetStreamer.
This helps avoid polluting non-X86 code with WinCOFF specific logic.
I used cdb to confirm that this can show locals in parent CSRs in a few
cases, most importantly the one where we use ESI as a frame pointer,
i.e. the one in http://crbug.com/756153#c28
Once we have cdb integration in debuginfo-tests, we can add integration
tests there.
Reviewers: majnemer, hans
Subscribers: aemerson, mgorny, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D38776
llvm-svn: 315513
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
MCObjectStreamer owns its MCAsmBackend -- this fixes the types to reflect that,
and allows us to remove another instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315410
functions.
This makes the ownership of the resulting MCObjectWriter clear, and allows us
to remove one instance of MCObjectStreamer's bizarre "holding ownership via
someone else's reference" trick.
llvm-svn: 315327
Removes two report_fatal_errors.
Implement this by removing EmitCFICommon, and do the checking in
getCurrentDwarfFrameInfo. Have the callers check for null before
dereferencing it.
llvm-svn: 315264
This makes the .seh_ directives slightly more usable from standalone
assembly files.
This removes a large number of report_fatal_errors and recovers from the
error by ignoring the directive.
llvm-svn: 315262
to WasmObjectWriter's constructor.
Fixes the same ownership issue for COFF that r315245 did for MachO:
WasmObjectWriter takes ownership of its MCWasmObjectTargetWriter, so we want to
pass this through to the constructor via a unique_ptr, rather than a raw ptr.
llvm-svn: 315260
Summary:
This suppresses the generation of .Lcfi labels in our textual assembler.
It was annoying that this generated cascading .Lcfi labels:
llc foo.ll -o - | llvm-mc | llvm-mc
After three trips through MCAsmStreamer, we'd have three labels in the
output when none are necessary. We should only bother creating the
labels and frame data when making a real object file.
This supercedes D38605, which moved the entire .seh_ implementation into
MCObjectStreamer.
This has the advantage that we do more checking when emitting textual
assembly, as a minor efficiency cost. Outputting textual assembly is not
performance critical, so this shouldn't matter.
Reviewers: majnemer, MatzeB
Subscribers: qcolombet, nemanjai, javed.absar, eraman, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D38638
llvm-svn: 315259
createWinCOFFObjectWriter to WinCOFFObjectWriter's constructor.
Fixes the same ownership issue for COFF that r315245 did for MachO:
WinCOFFObjectWriter takes ownership of its MCWinCOFFObjectTargetWriter, so we
want to pass this through to the constructor via a unique_ptr, rather than a
raw ptr.
llvm-svn: 315257
ELFObjectWriter's constructor.
Fixes the same ownership issue for ELF that r315245 did for MachO:
ELFObjectWriter takes ownership of its MCELFObjectTargetWriter, so we want to
pass this through to the constructor via a unique_ptr, rather than a raw ptr.
llvm-svn: 315254
to MCObjectWriter's constructor.
MCObjectWriter takes ownership of its MCMachObjectTargetWriter argument -- this
patch plumbs that ownership relationship through the constructor (which
previously took raw MCMachObjectTargetWriter*) and the createMachObjectWriter
function.
llvm-svn: 315245
The FrameInfo cannot be stored directly in the vector because chained
frames may refer to parent frames, so we need pointers that are stable
across a vector resize.
llvm-svn: 315080
Summary:
Xcode's dsymutil emits a __swift_ast DWARF section, which is required for debugging,
and which contains a byte-for-byte dump of the swiftmodule file.
Add this feature to llvm-dsymutil.
Tested with `gobjdump --dwarf=info -s`, by verifying that the contents of
`__DWARF.__swift_ast` match between Xcode's dsymutil and llvm-dsymutil
(Xcode's dwarfdump and llvm-dwarfdump don't currently recognize the
__swift_ast section).
Reviewers: aprantl, friss
Subscribers: llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D38504
llvm-svn: 315066
Summary:
Xcode's dsymutil emits a __swift_ast DWARF section, which is required for debugging,
and which contains a byte-for-byte dump of the swiftmodule file.
Add this feature to llvm-dsymutil.
Tested with `gobjdump --dwarf=info -s`, by verifying that the contents of
`__DWARF.__swift_ast` match between Xcode's dsymutil and llvm-dsymutil
(Xcode's dwarfdump and llvm-dwarfdump don't currently recognize the
__swift_ast section).
Reviewers: aprantl, friss
Subscribers: llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D38504
llvm-svn: 315014
Summary:
Xcode's dsymutil emits a __swift_ast DWARF section, which is required for debugging,
and which contains a byte-for-byte dump of the swiftmodule file.
Add this feature to llvm-dsymutil.
Tested with `gobjdump --dwarf=info -s`, by verifying that the contents of
`__DWARF.__swift_ast` match between Xcode's dsymutil and llvm-dsymutil
(Xcode's dwarfdump and llvm-dwarfdump don't currently recognize the
__swift_ast section).
Reviewers: aprantl, friss
Subscribers: llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D38504
llvm-svn: 315004
Currently llvm-mc just hangs inside infinite loop
while trying to parse file which has ".section .с" inside,
where section name is non-english character.
Patch fixes the issue.
In this patch I also moved content of non-english-characters.s
to test/MC/AsmParser/Inputs folder so that non-english-characters.s
becomes a single testcase for all invalid inputs containing non-english
symbols. That is convinent because llvm-mc otherwise tries
to parse and tokenize the whole testcase file with tools invocations and
it is harder to isolate the issue.
Differential revision: https://reviews.llvm.org/D38545
llvm-svn: 314973
I found that llvm-mc does not like non-english characters even in comments,
which it tries to tokenize.
Problem happens because of functions like isdigit(), isalnum() which takes
int argument and expects it is not negative.
But at the same time MCParser uses char* to store input buffer poiner, char has signed value,
so it is possible to pass negative value to one of functions from above and
that triggers an assert.
Testcase for demonstration is provided.
To fix the issue helper functions were introduced in StringExtras.h
Differential revision: https://reviews.llvm.org/D38461
llvm-svn: 314883
Previous code was a bit puzzling because of its use of pointers.
In this patch, we pass a vector and its offsets, instead of pointers to
vector elements.
llvm-svn: 314756
Previously these were being included as both imports and
exports, with the import being satisfied by the export
(or some strong symbol) at runtime. However proved
unnecessary and actually complicated linking as it meant
there was not a 1-to-1 mapping between a wasm function
/global index and a linker symbol.
Differential Revision: https://reviews.llvm.org/D38246
llvm-svn: 314245
In case of using a "nested" relocation expressions like this
`%hi(%neg(%gp_rel()))`, N32 ABI requires generation of three consecutive
relocations. That differs from the N64 ABI case where all relocations
are packed into the single relocation record.
llvm-svn: 313879
Now we pass the 'Is64_' flag to the MCELFObjectTargetWriter ctor iif
when we make deal with N64 ABI. So it is redundant to pass additional
'IsN64' flag.
llvm-svn: 313878
Add adds support for naming data segments. This is useful
useful linkers so that they can merge similar sections.
Differential Revision: https://reviews.llvm.org/D37886
llvm-svn: 313795
Add adds support for naming data segments. This is useful
useful linkers so that they can merge similar sections.
Differential Revision: https://reviews.llvm.org/D37886
llvm-svn: 313692
This reverts commit 6389e7aa724ea7671d096f4770f016c3d86b0d54.
There is a bug in this implementation where the string value of the
checksum is outputted, instead of the actual hex bytes. Therefore the
checksum is incorrect, and this prevent pdbs from being loaded by visual
studio. Revert this until the checksum is emitted correctly.
llvm-svn: 313431
This means that we can honor -fdata-sections rather than
always creating a segment for each symbol.
It also allows for a followup change to add .init_array and friends.
Differential Revision: https://reviews.llvm.org/D37876
llvm-svn: 313395
Previously the 'Padding' argument was the number of padding
bytes to add. However most callers that use 'Padding' know
how many overall bytes they need to write. With the previous
code this would mean encoding the LEB once to find out how
many bytes it would occupy and then using this to calulate
the 'Padding' value.
See: https://reviews.llvm.org/D36595
Differential Revision: https://reviews.llvm.org/D37494
llvm-svn: 313393
- Create helper function for resolving weak references.
- Add test that preproduces the crash.
Differential Revision: https://reviews.llvm.org/D37916
llvm-svn: 313381
Summary:
The checksums had already been placed in the IR, this patch allows
MCCodeView to actually write it out to an MCStreamer.
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37157
llvm-svn: 313374
This is stepping stone towards honoring -fdata-sections
and letting the assembler decide how many wasm data
segments to create.
Differential Revision: https://reviews.llvm.org/D37834
llvm-svn: 313313
Looks like these were copied from the ELF sections but
don't apply to Wasm and were not used anywhere.
Also remove unused Wasm methods in MCContext.
Differential Revision: https://reviews.llvm.org/D37633
llvm-svn: 313058
Some refactoring to X86AsmParser, mostly regarding the way rewrites are conducted.
Mainly, we try to concentrate all the rewrite effort under one hood, so it'll hopefully be less of a mess and easier to maintain and understand.
naturally, some frontend tests were affected: D36794
Differential Revision: https://reviews.llvm.org/D36793
llvm-svn: 311639
Re-committing after r311325 fixed an unintentional use of '#' comments in
clang.
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 311326
Summary:
isThumb returns true for Thumb triples (little and big endian), isARM
returns true for ARM triples (little and big endian).
There are a few more checks using arm/thumb that are not covered by
those functions, e.g. that the architecture is either ARM or Thumb
(little endian) or ARM/Thumb little endian only.
Reviewers: javed.absar, rengolin, kristof.beyls, t.p.northover
Reviewed By: rengolin
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D34682
llvm-svn: 310781
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 310457
I was surprised to see the code model being passed to MC. After all,
it assembles code, it doesn't create it.
The one place it is used is in the expansion of .cfi directives to
handle .eh_frame being more that 2gb away from the code.
As far as I can tell, gnu assembler doesn't even have an option to
enable this. Compiling a c file with gcc -mcmodel=large produces a
regular looking .eh_frame. This is probably because in practice linker
parse and recreate .eh_frames.
In llvm this is used because the JIT can place the code and .eh_frame
very far apart. Ideally we would fix the jit and delete this
option. This is hard.
Apart from confusion another problem with the current interface is
that most callers pass CodeModel::Default, which is bad since MC has
no way to map it to the target default if it actually needed to.
This patch then replaces the argument with a boolean with a default
value. The vast majority of users don't ever need to look at it. In
fact, only CodeGen and llvm-mc use it and llvm-mc just to enable more
testing.
llvm-svn: 309884
GAS ignores the aforementioned issue
this patch aligns LLVM + throws in an appropriate warning
Differential Revision: https://reviews.llvm.org/D36060
llvm-svn: 309841
Rather than passing along most of the parameters, pass a reference to
the MCDWARFrameInfo instead. This makes it easier to pass additional
information about the frame to the checks. We need to keep the extra
constructor for the Key around to allow the construction of the null and
tombstone keys. NFC.
llvm-svn: 309493
If the return column is different, we cannot coalesce the CIE across the
FDEs. Add that to the key calculation. This ensures that we emit a
separate CIE.
llvm-svn: 309492
This adds support for the CFI pseudo-op return_column. This specifies
the frame table column which contains the return address.
Addresses PR33953!
llvm-svn: 309360
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
Summary: When implementing MCFillFragment, use the size of the fragment,
rather than the size of the section.
Patch by Dan Gohman
Differential Revision: https://reviews.llvm.org/D35090
llvm-svn: 307565
Model weakly defined symbols as symbols that are both
exports and imported and marked as weak. Local references
to the symbols refer to the import but the linker can
resolve this to the weak export if not strong symbol
is found at link time.
Differential Revision: https://reviews.llvm.org/D35029
llvm-svn: 307348
Previously we were generating a void(void) function type
for a weak alias. Update the weak-alias test case to
catch this.
Differential Revision: https://reviews.llvm.org/D34734
llvm-svn: 307194
The overal size of the data section (including BSS)
is otherwise not included in the wasm binary.
Differential Revision: https://reviews.llvm.org/D34657
llvm-svn: 306459
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
X86_64 COFF only has support for 32 bit pcrel relocations. Produce an
error on all others.
Note that gnu as has extended the relocation values to support
this. It is not clear if we should support the gnu extension.
llvm-svn: 306082
For whatever reason, when processing
.globl foo
foo:
.data
bar:
.long foo-bar
llvm-mc creates a relocation with the section:
0x0 IMAGE_REL_I386_REL32 .text
This is different than when the relocation is relative from the
beginning. For example, a file with
call foo
produces
0x0 IMAGE_REL_I386_REL32 foo
I would like to refactor the logic for converting "foo - ." into a
relative relocation so that it is shared with ELF. This is the first
step and just changes the coff implementation to match what ELF (and
COFF in the case of calls) does.
llvm-svn: 306063
There's nothing incorrect about emitting such relocations against
symbols defined in other objects. The code in EmitCOFFSec* was missing
the visitUsedExpr part of MCStreamer::EmitValueImpl, so these symbols
were not being registered with the object file assembler.
This will be used to make reduced test cases for LLD.
llvm-svn: 306057
It looks like that when this code was written recordRelocation could
be called with A-B where A and B are in the same section. The
expression evaluation logic these days makes sure those are folded, so
some of this code was dead.
llvm-svn: 306053
Without this cast the "char" overload of operator<< is
chosen and the values is output as an ascii rather than
an integer.
Differential Revision: https://reviews.llvm.org/D34486
llvm-svn: 306039
- Use auto where appropriate
- Use early return to reduce nesting
- Remove stray comment line
- Use C++ foreach over explicit iterator
Differential Revision: https://reviews.llvm.org/D34477
llvm-svn: 305971
The lld-x86_64-darwin13 is failing with:
error: unused function 'operator<<'
Wrap the declation in ifndef NDEBUG, which matches
what is done in MipsELFObjectWriter.cpp.
Differential Revision: https://reviews.llvm.org/D34384
llvm-svn: 305771
This fixes two build failures that only occur in certain
configurations:
- error: unused function 'operator<<'
- error: control reaches end of non-void function
Differential Revision: https://reviews.llvm.org/D34382
llvm-svn: 305770
This ensures that symbolic relocations are generated for stack
pointer manipulations.
These relocations are of type R_WEBASSEMBLY_GLOBAL_INDEX_LEB.
This change also adds support for reading relocations of this
type in WasmObjectFile.cpp.
Since its a globally imported symbol this does mean that
the get_global/set_global instruction won't be valid until
the objects are linked that global used in no longer an
imported global.
Differential Revision: https://reviews.llvm.org/D34172
llvm-svn: 305616
Previously we were writing the value function index space
value but for these types of relocations we want to be
writing the table element index space value.
Add a test case for these relocation types that fails
without this change.
Differential Revision: https://reviews.llvm.org/D33962
llvm-svn: 305253
When an empty comment is present in an assembly file, the compiler will crash because it checks the first character for '\n' or '\r'.
The fix consists of also checking if the string is empty before accessing the *front* method of the StringRef.
A test is included for the x86 target, but this issue is reproducible with other targets as well.
Patch by Alexandru Guduleasa!
Reviewers: niravd, grosbach, llvm-commits
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D33993
llvm-svn: 305077
This is a preparatory change to expose the debug compression style to
clang. It requires exposing the enumeration and passing the actual
value through to the backend from the frontend in actual value form
rather than a boolean that selects the GNU style of debug info
compression.
Minor tweak to the ELF Object Writer to use a variable for re-used
values. Add an assertion that debug information format is one of the
two currently known types if debug information is being compressed.
llvm-svn: 305038
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
The change cleans up and unifies the handling of relocation
entries in WasmObjectWriter. Type index relocation no longer
need to be handled separately.
The only externally visible change should be that type
index relocations are no longer grouped at the end.
Differential Revision: https://reviews.llvm.org/D33918
llvm-svn: 304816
These methods looks like they were originally came from
MCELFObjectTargetWriter but they are never called by the
WasmObjectWriter.
Remove these methods meant the declaration of WasmRelocationEntry
could also move into the cpp file.
Differential Revision: https://reviews.llvm.org/D33905
llvm-svn: 304804
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
The size of this function was getting a little out of.
control. Split code for writing each section type into
seperate functions.
Differential Revision: https://reviews.llvm.org/D33792
llvm-svn: 304634
Undefined externals don't need to have a size or an offset.
This was broken by r303915. Added a test for this case.
This fixes the "Compile LLVM Torture (o)" step on the wasm
waterfall.
Differential Revision: https://reviews.llvm.org/D33803
llvm-svn: 304505
This is the beginning of an effort to move the codeview yaml
reader / writer into ObjectYAML so that it can be shared.
Currently the only consumer / producer of CodeView YAML is
llvm-pdbdump, but CodeView can exist outside of PDB files, and
indeed is put into object files and passed to the linker to
produce PDB files. Furthermore, there are subtle differences
in the types of records that show up in object file CodeView
vs PDB file CodeView, but they are otherwise 99% the same.
By having this code in ObjectYAML, we can have llvm-pdbdump
reuse this code, while teaching obj2yaml and yaml2obj to use
this syntax for dealing with object files that can contain
CodeView.
This patch only adds support for CodeView type information
to ObjectYAML. Subsequent patches will add support for
CodeView symbol information.
llvm-svn: 304248
Also, include global entries for all data symbols, not
just external ones, since these are referenced by the
relocation records.
Add a test case that includes unnamed data.
Differential Revision: https://reviews.llvm.org/D33079
llvm-svn: 303915
Re-applying now that PR32825 which was raised on the commit this fixed up is now known to have also been fixed by this commit.
Original commit message:
Multiple ldr pseudoinstructions with the same constant value will
reuse the same constant pool entry. However, if the constant pool
is explicitly flushed with a .ltorg directive, we should not try
to reference constants in the previous pool any longer, since they
may be out of range.
This fixes assembling hand-written assembler source which repeatedly
loads the same constant value, across a binary size larger than the
pc-relative fixup range for ldr instructions (4096 bytes). Such
assembler source already uses explicit .ltorg instructions to emit
constant pools with regular intervals. However if we try to reuse
constants emitted in earlier pools, they end up out of range.
This makes the output of the testcase match what binutils gas does
(prior to this patch, it would fail to assemble).
Differential Revision: https://reviews.llvm.org/D32847
llvm-svn: 303540
Re-applying now that the open bug on this commit, PR32825, is known to be fixed.
Original commit message:
Summary: This patch returns the same label if the CP entry with the same value has been created.
Reviewers: eli.friedman, rengolin, jmolloy
Subscribers: majnemer, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D25804
llvm-svn: 303539
This reverts commit r302416. This was a fixup for r286006, which has now been reverted so this doesn't apply (either in concept or in code).
This commit itself has no problems, but the underlying issue it was fixing has now disappeared from the codebase.
llvm-svn: 303536
We were previously silently emitting bogus data in release mode,
making it very hard to diagnose the error, or crashing with an
assert in debug mode. A proper diagnostic is now always emitted
when the value to be emitted is out of range.
llvm-svn: 303041
This patch is the fourth patch in a series of reviews for the Altmacro feature.
This patch introduces a new escape character '!' and it depends on D32701.
according to https://sourceware.org/binutils/docs/as/Altmacro.html:
"single-character string escape
To include any single character literally in a string (even if the character would otherwise have some special meaning), you can prefix the character with !' (an exclamation mark). For example, you can write <4.3 !> 5.4!!>' to get the literal text `4.3 > 5.4!'. "
Differential Revision: https://reviews.llvm.org/D32792
llvm-svn: 302652
Multiple ldr pseudoinstructions with the same constant value will
reuse the same constant pool entry. However, if the constant pool
is explicitly flushed with a .ltorg directive, we should not try
to reference constants in the previous pool any longer, since they
may be out of range.
This fixes assembling hand-written assembler source which repeatedly
loads the same constant value, across a binary size larger than the
pc-relative fixup range for ldr instructions (4096 bytes). Such
assembler source already uses explicit .ltorg instructions to emit
constant pools with regular intervals. However if we try to reuse
constants emitted in earlier pools, they end up out of range.
This makes the output of the testcase match what binutils gas does
(prior to this patch, it would fail to assemble).
Differential Revision: https://reviews.llvm.org/D32847
llvm-svn: 302416
In this patch, I introduce a new altmacro string delimiter.
This review is the second review in a series of four reviews.
(one for each altmacro feature: LOCAL, string delimiter, string '!' escape sign and absolute expression as a string '%' ).
In the alternate macro mode, you can delimit strings with matching angle brackets <..>
when using it as a part of calling macro arguments.
As described in the https://sourceware.org/binutils/docs-2.27/as/Altmacro.html
"<string>
You can delimit strings with matching angle brackets."
assumptions:
1. If an argument begins with '<' and ends with '>'. The argument is considered as a string.
2. Except adding new string mark '<..>', a regular macro behavior is expected.
3. The altmacro cannot affect the regular less/greater behavior.
4. If a comma is present inside an angle brackets it considered as a character and not as a separator.
Differential Revision: https://reviews.llvm.org/D32701
llvm-svn: 302135
. there should be no runtime relocation inside the bpf function.
. relocation supported here mostly for debugging.
. a test case is added.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 302055
In this patch, I introduce a new alt macro feature.
This feature adds meaning for the % when using it as a prefix to the calling macro arguments.
In the altmacro mode, the percent sign '%' before an absolute expression convert the expression first to a string.
As described in the https://sourceware.org/binutils/docs-2.27/as/Altmacro.html
"Expression results as strings
You can write `%expr' to evaluate the expression expr and use the result as a string."
expression assumptions:
1. '%' can only evaluate an absolute expression.
2. Altmacro '%' must be the first character of the evaluated expression.
3. If no '%' is located before the expression, a regular module operation is expected.
4. The result of Absolute Expressions can be only integer.
Differential Revision: https://reviews.llvm.org/D32526
llvm-svn: 301797
There is a lot of duplicate code for printing line info between
YAML and the raw output printer. This introduces a base class
that can be shared between the two, and makes some minor
cleanups in the process.
llvm-svn: 301728
Also, add test for data relocations and fix addend to
be signed.
Subscribers: jfb, dschuff
Differential Revision: https://reviews.llvm.org/D32513
llvm-svn: 301690
We have a lot of very similarly named classes related to
dealing with module debug info. This patch has NFC, it just
renames some classes to be more descriptive (albeit slightly
more to type). The mapping from old to new class names is as
follows:
Old | New
ModInfo | DbiModuleDescriptor
ModuleSubstream | ModuleDebugFragment
ModStream | ModuleDebugStream
With the corresponding Builder classes renamed accordingly.
Differential Revision: https://reviews.llvm.org/D32506
llvm-svn: 301555
Introducing a new error to macro parameters' parsing:
currently, llvm-mc won't complain if a macro have two (or more) named params with the same name.
this behavior is false, as there's no merit in having some params sharing a name.
now, instead of tolerate such a phenomena - emit an appropriate error.
Differential Revision: https://reviews.llvm.org/D31674
llvm-svn: 299815
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
Set correct default flags and section type based on its name for .text,
.data, .bss, .init_array, .fini_array, .preinit_array, .tdata, and .tbss
and support section name suffixes for .data.*, .rodata.*, .text.*,
.bss.*, .tdata.* and .tbss.* which matches the behavior of GAS.
Fixes PR31888.
Differential Revision: https://reviews.llvm.org/D30229
llvm-svn: 299484
MS assembly syntax provide us with the 'EVEN' directive as a synonymous to at&t '.even'.
This patch include the (small, simple) changes need to allow it.
Test is provided at the following (clang-side) review:
https://reviews.llvm.org/D27418
Differential Revision: https://reviews.llvm.org/D27417
llvm-svn: 299453
Dont emit Mapping symbols for sections that contain only data.
Summary:
Dont emit mapping symbols for sections that contain only data.
Reviewers: rengolin, weimingz, kparzysz, t.p.northover, peter.smith
Reviewed By: t.p.northover
Patched by Shankar Easwaran <shankare@codeaurora.org>
Subscribers: alekseyshl, t.p.northover, llvm-commits
Differential Revision: https://reviews.llvm.org/D30724
llvm-svn: 299392
Add support for the new relocations and linking metadata section support in
https://github.com/WebAssembly/tool-conventions/blob/master/Linking.md. In
particular, this allows LLVM to indicate which variable is the stack pointer,
so that it can be linked with other objects.
This also adds support for emitting type relocations for call_indirect
instructions.
Right now, this is mainly tested by using wabt and hexdump to examine the
output on selected testcases. We'll add more tests as the design stablizes
and more of the pieces are in place.
llvm-svn: 299141
This fix is a follow up a previous change with stored
value types as signed integers in memory.
In future, once the yaml<->wasm binary patche lands we
can add test coverage for this kind of thing.
Differential Revision: https://reviews.llvm.org/D31227
Patch by Sam Clegg
llvm-svn: 298612
A recent change switch the in-memory wasm value types
to be signed integers, but I missing a few cases where
these were being writing to the binary.
Differential Revision: https://reviews.llvm.org/D31014
Patch by Sam Clegg
llvm-svn: 297991
This change updates to the format of the 'names' sectionin the
generated wasm binary to match the latest changesto the design
and 'wabt'.
Differential Revision: https://reviews.llvm.org/D30950
Patch by Sam Clegg
llvm-svn: 297877
Previously we were using the encoded LEB hex values
for the value types. This change uses the decoded
negative value and the LEB encoder to write them out.
Differential Revision: https://reviews.llvm.org/D30847
Patch by Sam Clegg
llvm-svn: 297777
Make MCSectionELF::AssociatedSection be a link to a symbol, because
that's how it works in the assembly, and use it in the asm printer.
llvm-svn: 297769
Summary:
This is a continuation of D28861. Add an SMLoc to MCUnaryExpr such that
a better diagnostic can be given in case of an error in later stages of
assembling.
Reviewers: rengolin, grosbach, javed.absar, olista01
Reviewed By: olista01
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30581
llvm-svn: 297454
All MIPS .debug_* sections should be marked with ELF type SHT_MIPS_DWARF
accordingly the specification [1]. Also the same section type is assigned
to these sections by GNU tools.
[1] ftp.software.ibm.com/software/os390/czos/dwarf/mips_extensions.pdf
Differential Revision: https://reviews.llvm.org/D29789
llvm-svn: 297447
GAS supports specification of section header's type using a numeric
value [1]. This patch brings the same functionality to LLVM. That allows
to setup some target-specific section types belong to the SHT_LOPROC -
SHT_HIPROC range. If we attempt to print unknown section type, MCSectionELF
class shows an error message. It's better than print sole '@' sign
without any section type name.
In case of MIPS, example of such section's type is SHT_MIPS_DWARF.
Without the patch we will have to implement some workarounds
in probably not-MIPS-specific part of code base to convert SHT_MIPS_DWARF
to the @progbits while printing assembly and to assign SHT_MIPS_DWARF for
@progbits sections named .debug_* if we encounter such section in
an input assembly.
[1] https://sourceware.org/binutils/docs/as/Section.html
Differential Revision: https://reviews.llvm.org/D29719
llvm-svn: 297446
Summary:
In a .symver assembler directive like:
.symver name, name2@@nodename
"name2@@nodename" should get the same symbol binding as "name".
While the ELF object writer is updating the symbol binding for .symver
aliases before emitting the object file, not doing so when the module
inline assembly is handled by the RecordStreamer is causing the wrong
behavior in *LTO mode.
E.g. when "name" is global, "name2@@nodename" must also be marked as
global. Otherwise, the symbol is skipped when iterating over the LTO
InputFile symbols (InputFile::Symbol::shouldSkip). So, for example,
when performing any *LTO via the gold-plugin, the versioned symbol
definition is not recorded by the plugin and passed back to the
linker. If the object was in an archive, and there were no other symbols
needed from that object, the object would not be included in the final
link and references to the versioned symbol are undefined.
The llvm-lto2 tests added will give an error about an unused symbol
resolution without the fix.
Reviewers: rafael, pcc
Reviewed By: pcc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30485
llvm-svn: 297332
This is for running the assembler with -g (to emit DWARF describing
the assembler source).
Differential Revision: http://reviews.llvm.org/D30475
llvm-svn: 296541
Instead of requiring every non-COFF MCObjectStreamer to implement the
COFF hooks just to do an llvm_unreachable to say that they're not
supported, do the llvm_unreachable in the default implementation, as
suggested by rnk in https://reviews.llvm.org/D26722.
llvm-svn: 296403
With the "wasm32-unknown-unknown-wasm" triple, this allows writing out
simple wasm object files, and is another step in a larger series toward
migrating from ELF to general wasm object support. Note that this code
and the binary format itself is still experimental.
llvm-svn: 296190
This just adds the basic skeleton for supporting a new object file format.
All of the actual encoding will be implemented in followup patches.
Differential Revision: https://reviews.llvm.org/D26722
llvm-svn: 295803
- Fix doxygen comments
- Remove duplicated comments
- Remove section comments (which became wrong over time)
- Use more `const` and references but less `auto`
llvm-svn: 295687
MSVC link.exe cannot handle associative sections that refer later
sections in the section header. Technically, such COFF object doesn't
violate the Microsoft COFF spec, as the spec doesn't say anything
about that, but still we should avoid doing that to make it compatible
with MS tools.
This patch assigns smaller section numbers to non-associative sections
and larger numbers to associative sections. This should resolve the
compatibility issue.
Differential Revision: https://reviews.llvm.org/D30080
llvm-svn: 295464
This makes sure we get the same redefinition rules regardless of who
is printing (asm parser, codegen) and to what (asm, obj).
This fixes an unintentional regression in r293936.
llvm-svn: 294752
Fixed test.
Summary:
Enables source location in diagnostic messages from the backend. This
is after parsing, during finalization. This requires the SourceMgr, the
inline assembly string buffer, and DiagInfo to still be alive after
EmitInlineAsm returns.
This patch creates a single SourceMgr for inline assembly inside the
AsmPrinter. MCContext gets a pointer to this SourceMgr. Using one
SourceMgr per call to EmitInlineAsm would make it difficult for
MCContext to figure out in which SourceMgr the SMLoc is located, while a
single SourceMgr can figure it out if it has multiple buffers.
The Str argument to EmitInlineAsm is copied into a buffer and owned by
the inline asm SourceMgr. This ensures that DiagHandlers won't print
garbage. (Clang emits a "note: instantiated into assembly here", which
refers to this string.)
The AsmParser gets destroyed before finalization, which means that the
DiagHandlers the AsmParser installs into the SourceMgr will be stale.
Restore the saved DiagHandlers.
Since now we're using just one SourceMgr for multiple inline asm
strings, we need to tell the AsmParser which buffer it needs to parse
currently. Hand a buffer id -- returned from SourceMgr::
AddNewSourceBuffer -- to the AsmParser.
Reviewers: rnk, grosbach, compnerd, rengolin, rovka, anemet
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29441
llvm-svn: 294458
Summary:
Enables source location in diagnostic messages from the backend. This
is after parsing, during finalization. This requires the SourceMgr, the
inline assembly string buffer, and DiagInfo to still be alive after
EmitInlineAsm returns.
This patch creates a single SourceMgr for inline assembly inside the
AsmPrinter. MCContext gets a pointer to this SourceMgr. Using one
SourceMgr per call to EmitInlineAsm would make it difficult for
MCContext to figure out in which SourceMgr the SMLoc is located, while a
single SourceMgr can figure it out if it has multiple buffers.
The Str argument to EmitInlineAsm is copied into a buffer and owned by
the inline asm SourceMgr. This ensures that DiagHandlers won't print
garbage. (Clang emits a "note: instantiated into assembly here", which
refers to this string.)
The AsmParser gets destroyed before finalization, which means that the
DiagHandlers the AsmParser installs into the SourceMgr will be stale.
Restore the saved DiagHandlers.
Since now we're using just one SourceMgr for multiple inline asm
strings, we need to tell the AsmParser which buffer it needs to parse
currently. Hand a buffer id -- returned from SourceMgr::
AddNewSourceBuffer -- to the AsmParser.
Reviewers: rnk, grosbach, compnerd, rengolin, rovka, anemet
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29441
llvm-svn: 294433
On ELF every section can have a corresponding section symbol. When in
an assembly file we have
.quad .text
the '.text' refers to that symbol.
The way we used to handle them is to leave .text an undefined symbol
until the very end when the object writer would map them to the
actual section symbol.
The problem with that is that anything before the end would see an
undefined symbol. This could result in bad diagnostics
(test/MC/AArch64/label-arithmetic-diags-elf.s), or incorrect results
when using the asm streamer (est/MC/Mips/expansion-jal-sym-pic.s).
Fixing this will also allow using the section symbol earlier for
setting sh_link of SHF_METADATA sections.
This patch includes a few hacks to avoid changing our behaviour when
handling conflicts between section symbols and other symbols. I
reported pr31850 to track that.
llvm-svn: 293936
@ABS8 can be applied to symbols which appear as immediate operands to
instructions that have a 8-bit immediate form for that operand. It causes
the assembler to use the 8-bit form and an 8-bit relocation (e.g. R_386_8
or R_X86_64_8) for the symbol.
Differential Revision: https://reviews.llvm.org/D28688
llvm-svn: 293667
Different architectures can have different meaning for flags in the
SHF_MASKPROC mask, so we should always check what the architecture use
before checking the flag.
NFC for now, but will allow fixing the value of an xmos flag.
llvm-svn: 293484
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
Also fixes a much worse bug where we emitted the wrong gap size for the
def range uncovered by the test for this issue.
Fixes PR31726.
llvm-svn: 292949
Add a SMLoc to MCExpr. Most code does not generate or consume the SMLoc (yet).
Patch by Sanne Wouda <sanne.wouda@arm.com>!
Differential Revision: https://reviews.llvm.org/D28861
llvm-svn: 292515
If F is a Thumb function symbol, and G = F + const, and G is a
function symbol, then G is Thumb. Because what else could it be?
Differential Revision: https://reviews.llvm.org/D28878
llvm-svn: 292514
No any changes, will follow up with D28807 commit containing APLi change for clang
to fix build issues happened.
Original commit message:
[Support/Compression] - Change zlib API to return Error instead of custom status.
Previously API returned custom enum values.
Patch changes it to return Error with string description.
That should help users to report errors in universal way.
Differential revision: https://reviews.llvm.org/D28684
llvm-svn: 292226
Previously API returned custom enum values.
Patch changes it to return Error with string description.
That should help users to report errors in universal way.
Differential revision: https://reviews.llvm.org/D28684
llvm-svn: 292214
There are cases of AVX-512 instructions that have two possible encodings. This is the case with instructions that use vector registers with low indexes of 0 - 15 and do not use the zmm registers or the mask k registers.
The EVEX encoding prefix requires 4 bytes whereas the VEX prefix can take only up to 3 bytes. Consequently, using the VEX encoding for these instructions results in a code size reduction of ~2 bytes even though it is compiled with the AVX-512 features enabled.
Reviewers: Craig Topper, Zvi Rackoover, Elena Demikhovsky
Differential Revision: https://reviews.llvm.org/D27901
llvm-svn: 290663
This is the 3rd of 3 patches to get reading and writing of
CodeView symbol and type records to use a single codepath.
Differential Revision: https://reviews.llvm.org/D26427
llvm-svn: 289978
One more attempt to re-commit the patch r285355, which I had to revert in r285362, because some tests were failing (the reason is because the size of the line_table varied depending on the full file name).
In the past the compiler always emitted .debug_line version 2, though some opcodes from DWARF 3 (e.g. DW_LNS_set_prologue_end, DW_LNS_set_epilogue_begin or DW_LNS_set_isa) and from DWARF 4 could be emitted by the compiler.
This patch changes version information of .debug_line to exactly match the DWARF version. For .debug_line version 4, a new field maximum_operations_per_instruction is emitted.
Differential Revision: https://reviews.llvm.org/D16697
llvm-svn: 289925
Specifically avoid implicit conversions from/to integral types to
avoid potential errors when changing the underlying type. For example,
a typical initialization of a "full" mask was "LaneMask = ~0u", which
would result in a value of 0x00000000FFFFFFFF if the type was extended
to uint64_t.
Differential Revision: https://reviews.llvm.org/D27454
llvm-svn: 289820
Summary:
GAS already allows flags for sections to be specified directly as a
numeric value. This functionality is particularly useful for setting
processor or application-specific values that may not be directly
supported or understood by LLVM. This patch allows LLVM to use numeric
section flag values verbatim if specified by the assembly file.
Reviewers: grosbach, rafael, t.p.northover, rengolin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27451
llvm-svn: 289785
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
llvm-svn: 289784
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
Currently, the error messages we emit for the .org directive when the
expression is not absolute or is out of range do not include the line
number of the directive, so it can be hard to track down the problem if
a file contains many .org directives.
This patch stores the source location in the MCOrgFragment, so that it
can be used for diagnostics emitted during layout.
Since layout is an iterative process, and the errors are detected during
each iteration, it would have been possible for errors to be reported
multiple times. To prevent this, I've made the assembler bail out after
each iteration if any errors have been reported. This will still allow
multiple unrelated errors to be reported in the common case where they
are all detected in the first round of layout.
Differential Revision: https://reviews.llvm.org/D27411
llvm-svn: 289643
This allows clients to register an AsmCommentConsumer with the MCAsmLexer,
which receives a callback each time a comment is parsed.
Differential Revision: https://reviews.llvm.org/D27511
llvm-svn: 289036
The relocations for `DIEEntry::EmitValue` were wrong for Win64
(emitting FK_Data_4 instead of FK_SecRel_4). This corrects that
oversight so that the DWARF data is correct in Win64 COFF files.
Fixes PR15393.
Patch by Jameson Nash <jameson@juliacomputing.com> based on a patch
by David Majnemer.
Differential Revision: https://reviews.llvm.org/D21731
llvm-svn: 289013
clang -target arm deprecated-asm.s -c
deprecated-asm.s:30:9: warning: use of SP or PC in the list is deprecated
stmia r4!, {r12-r14}
We have to have an option what can disable it.
Patched by Yin Ma!
Reviewers: joey, echristo, weimingz
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D27219
llvm-svn: 288734
Move the cast<MCSymbolELF> inside emitELFSize, so that:
- it's done in one place instead of at each call
- it's more consistent with similar functions like EmitCOFFSafeSEH
- ambiguity between cast<> and dyn_cast<> is avoided (which also
eliminates an unnecessary dyn_cast call)
This also makes it easier to experiment with using ".size" directives on
non-ELF targets.
llvm-svn: 288437
Summary:
Changes to llvm-mc to move common logic to separate function.
Related clang patch: https://reviews.llvm.org/D26213
Reviewers: rafael, t.p.northover, colinl, echristo, rengolin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26214
llvm-svn: 288396
Choosing a "cfi" name makes the intend a bit clearer in an assembly dump
and more importantly the assembly dumps are slightly more stable as the
numbers don't move around anymore when unrelated code calls
createTempSymbol() more or less often.
As they are temp labels the name doesn't influence the generated object
code.
Differential Revision: https://reviews.llvm.org/D27244
llvm-svn: 288290
We would attempt to access the symbol section without ensuring that the symbol
was not absolute. When the assembler referenced relocation is not evaluated to
the absolute, but when we record the relocation, we would query the section.
Because the symbol is absolute, it does not have a section associated with it,
triggering an assertion. Just be more careful about the access of the section.
Addresses PR31064!
llvm-svn: 287619
Summary: This patch returns the same label if the CP entry with the same value has been created.
Reviewers: eli.friedman, rengolin, jmolloy
Subscribers: majnemer, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D25804
llvm-svn: 286006
In the past the compiler always emitted .debug_line version 2, though some opcodes from DWARF 3 (e.g. DW_LNS_set_prologue_end, DW_LNS_set_epilogue_begin or DW_LNS_set_isa) and from DWARF 4 could be emitted by the compiler.
This patch changes version information of .debug_line to exactly match the DWARF version. For .debug_line version 4, a new field maximum_operations_per_instruction is emitted.
Differential Revision: https://reviews.llvm.org/D16697
llvm-svn: 285355
Fix AsmParser lines to correctly handle end-of-line pre-processor
comments parsing when '#' is not the assembly line comment prefix.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25567
llvm-svn: 284978
Summary:
Reclaiming the name 'CachedHashString' will let us add a type with that
name that owns its value.
Reviewers: timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25644
llvm-svn: 284434
Adrian McCarthy